| # arch/arm/plat-s3c64xx/Makefile |
| # |
| # Copyright 2009 Simtec Electronics |
| # |
| # Licensed under GPLv2 |
| |
| obj-y := |
| obj-m := |
| obj-n := dummy.o |
| obj- := |
| |
| # Objects we always build independent of SoC choice |
| |
| obj-y += init.o |
| obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o |
| obj-y += clock.o |
| obj-y += pwm-clock.o |
| obj-y += gpio.o |
| obj-y += gpio-config.o |
| obj-y += dev-asocdma.o |
| |
| obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT) += gpiolib.o |
| obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o |
| |
| obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o |
| obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o |
| |
| # ADC |
| |
| obj-$(CONFIG_S3C_ADC) += adc.o |
| |
| # devices |
| |
| obj-y += platformdata.o |
| |
| obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o |
| obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o |
| obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o |
| obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o |
| obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o |
| obj-y += dev-i2c0.o |
| obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o |
| obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o |
| obj-$(CONFIG_S3C_DEV_I2C3) += dev-i2c3.o |
| obj-$(CONFIG_S3C_DEV_I2C4) += dev-i2c4.o |
| obj-$(CONFIG_S3C_DEV_I2C5) += dev-i2c5.o |
| obj-$(CONFIG_S3C_DEV_I2C6) += dev-i2c6.o |
| obj-$(CONFIG_S3C_DEV_I2C7) += dev-i2c7.o |
| obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o |
| obj-y += dev-uart.o |
| obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o |
| obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o |
| obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o |
| obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o |
| obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o |
| obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o |
| |
| obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o |
| obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o |
| obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o |
| obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o |
| |
| # DMA support |
| |
| obj-$(CONFIG_S3C_DMA) += dma.o |
| |
| obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o |
| |
| # PM support |
| |
| obj-$(CONFIG_PM) += pm.o |
| obj-$(CONFIG_PM) += pm-gpio.o |
| obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o |
| |
| obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o |
| |
| # PD support |
| |
| obj-$(CONFIG_SAMSUNG_PD) += pd.o |
| |
| # PWM support |
| |
| obj-$(CONFIG_HAVE_PWM) += pwm.o |
