| /* |
| * Copyright (C) 2003 - 2006 NetXen, Inc. |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, |
| * MA 02111-1307, USA. |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE. |
| * |
| * Contact Information: |
| * info@netxen.com |
| * NetXen, |
| * 3965 Freedom Circle, Fourth floor, |
| * Santa Clara, CA 95054 |
| * |
| * |
| * Source file for NIC routines to initialize the Phantom Hardware |
| * |
| */ |
| |
| #include <linux/netdevice.h> |
| #include <linux/delay.h> |
| #include "netxen_nic.h" |
| #include "netxen_nic_hw.h" |
| #include "netxen_nic_phan_reg.h" |
| |
| struct crb_addr_pair { |
| u32 addr; |
| u32 data; |
| }; |
| |
| unsigned long last_schedule_time; |
| |
| #define NETXEN_MAX_CRB_XFORM 60 |
| static unsigned int crb_addr_xform[NETXEN_MAX_CRB_XFORM]; |
| #define NETXEN_ADDR_ERROR (0xffffffff) |
| |
| #define crb_addr_transform(name) \ |
| crb_addr_xform[NETXEN_HW_PX_MAP_CRB_##name] = \ |
| NETXEN_HW_CRB_HUB_AGT_ADR_##name << 20 |
| |
| #define NETXEN_NIC_XDMA_RESET 0x8000ff |
| |
| static inline void |
| netxen_nic_locked_write_reg(struct netxen_adapter *adapter, |
| unsigned long off, int *data) |
| { |
| void __iomem *addr = pci_base_offset(adapter, off); |
| writel(*data, addr); |
| } |
| |
| static void crb_addr_transform_setup(void) |
| { |
| crb_addr_transform(XDMA); |
| crb_addr_transform(TIMR); |
| crb_addr_transform(SRE); |
| crb_addr_transform(SQN3); |
| crb_addr_transform(SQN2); |
| crb_addr_transform(SQN1); |
| crb_addr_transform(SQN0); |
| crb_addr_transform(SQS3); |
| crb_addr_transform(SQS2); |
| crb_addr_transform(SQS1); |
| crb_addr_transform(SQS0); |
| crb_addr_transform(RPMX7); |
| crb_addr_transform(RPMX6); |
| crb_addr_transform(RPMX5); |
| crb_addr_transform(RPMX4); |
| crb_addr_transform(RPMX3); |
| crb_addr_transform(RPMX2); |
| crb_addr_transform(RPMX1); |
| crb_addr_transform(RPMX0); |
| crb_addr_transform(ROMUSB); |
| crb_addr_transform(SN); |
| crb_addr_transform(QMN); |
| crb_addr_transform(QMS); |
| crb_addr_transform(PGNI); |
| crb_addr_transform(PGND); |
| crb_addr_transform(PGN3); |
| crb_addr_transform(PGN2); |
| crb_addr_transform(PGN1); |
| crb_addr_transform(PGN0); |
| crb_addr_transform(PGSI); |
| crb_addr_transform(PGSD); |
| crb_addr_transform(PGS3); |
| crb_addr_transform(PGS2); |
| crb_addr_transform(PGS1); |
| crb_addr_transform(PGS0); |
| crb_addr_transform(PS); |
| crb_addr_transform(PH); |
| crb_addr_transform(NIU); |
| crb_addr_transform(I2Q); |
| crb_addr_transform(EG); |
| crb_addr_transform(MN); |
| crb_addr_transform(MS); |
| crb_addr_transform(CAS2); |
| crb_addr_transform(CAS1); |
| crb_addr_transform(CAS0); |
| crb_addr_transform(CAM); |
| crb_addr_transform(C2C1); |
| crb_addr_transform(C2C0); |
| crb_addr_transform(SMB); |
| } |
| |
| int netxen_init_firmware(struct netxen_adapter *adapter) |
| { |
| u32 state = 0, loops = 0, err = 0; |
| |
| /* Window 1 call */ |
| state = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); |
| |
| if (state == PHAN_INITIALIZE_ACK) |
| return 0; |
| |
| while (state != PHAN_INITIALIZE_COMPLETE && loops < 2000) { |
| udelay(100); |
| /* Window 1 call */ |
| state = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); |
| |
| loops++; |
| } |
| if (loops >= 2000) { |
| printk(KERN_ERR "Cmd Peg initialization not complete:%x.\n", |
| state); |
| err = -EIO; |
| return err; |
| } |
| /* Window 1 call */ |
| writel(MPORT_MULTI_FUNCTION_MODE, |
| NETXEN_CRB_NORMALIZE(adapter, CRB_MPORT_MODE)); |
| writel(PHAN_INITIALIZE_ACK, |
| NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); |
| |
| return err; |
| } |
| |
| #define NETXEN_ADDR_LIMIT 0xffffffffULL |
| |
| void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr, |
| struct pci_dev **used_dev) |
| { |
| void *addr; |
| |
| addr = pci_alloc_consistent(pdev, sz, ptr); |
| if ((unsigned long long)(*ptr) < NETXEN_ADDR_LIMIT) { |
| *used_dev = pdev; |
| return addr; |
| } |
| pci_free_consistent(pdev, sz, addr, *ptr); |
| addr = pci_alloc_consistent(NULL, sz, ptr); |
| *used_dev = NULL; |
| return addr; |
| } |
| |
| void netxen_initialize_adapter_sw(struct netxen_adapter *adapter) |
| { |
| int ctxid, ring; |
| u32 i; |
| u32 num_rx_bufs = 0; |
| struct netxen_rcv_desc_ctx *rcv_desc; |
| |
| DPRINTK(INFO, "initializing some queues: %p\n", adapter); |
| for (ctxid = 0; ctxid < MAX_RCV_CTX; ++ctxid) { |
| for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { |
| struct netxen_rx_buffer *rx_buf; |
| rcv_desc = &adapter->recv_ctx[ctxid].rcv_desc[ring]; |
| rcv_desc->rcv_free = rcv_desc->max_rx_desc_count; |
| rcv_desc->begin_alloc = 0; |
| rx_buf = rcv_desc->rx_buf_arr; |
| num_rx_bufs = rcv_desc->max_rx_desc_count; |
| /* |
| * Now go through all of them, set reference handles |
| * and put them in the queues. |
| */ |
| for (i = 0; i < num_rx_bufs; i++) { |
| rx_buf->ref_handle = i; |
| rx_buf->state = NETXEN_BUFFER_FREE; |
| DPRINTK(INFO, "Rx buf:ctx%d i(%d) rx_buf:" |
| "%p\n", ctxid, i, rx_buf); |
| rx_buf++; |
| } |
| } |
| } |
| } |
| |
| void netxen_initialize_adapter_hw(struct netxen_adapter *adapter) |
| { |
| int ports = 0; |
| struct netxen_board_info *board_info = &(adapter->ahw.boardcfg); |
| |
| if (netxen_nic_get_board_info(adapter) != 0) |
| printk("%s: Error getting board config info.\n", |
| netxen_nic_driver_name); |
| get_brd_port_by_type(board_info->board_type, &ports); |
| if (ports == 0) |
| printk(KERN_ERR "%s: Unknown board type\n", |
| netxen_nic_driver_name); |
| adapter->ahw.max_ports = ports; |
| } |
| |
| void netxen_initialize_adapter_ops(struct netxen_adapter *adapter) |
| { |
| switch (adapter->ahw.board_type) { |
| case NETXEN_NIC_GBE: |
| adapter->enable_phy_interrupts = |
| netxen_niu_gbe_enable_phy_interrupts; |
| adapter->disable_phy_interrupts = |
| netxen_niu_gbe_disable_phy_interrupts; |
| adapter->handle_phy_intr = netxen_nic_gbe_handle_phy_intr; |
| adapter->macaddr_set = netxen_niu_macaddr_set; |
| adapter->set_mtu = netxen_nic_set_mtu_gb; |
| adapter->set_promisc = netxen_niu_set_promiscuous_mode; |
| adapter->unset_promisc = netxen_niu_set_promiscuous_mode; |
| adapter->phy_read = netxen_niu_gbe_phy_read; |
| adapter->phy_write = netxen_niu_gbe_phy_write; |
| adapter->init_niu = netxen_nic_init_niu_gb; |
| adapter->stop_port = netxen_niu_disable_gbe_port; |
| break; |
| |
| case NETXEN_NIC_XGBE: |
| adapter->enable_phy_interrupts = |
| netxen_niu_xgbe_enable_phy_interrupts; |
| adapter->disable_phy_interrupts = |
| netxen_niu_xgbe_disable_phy_interrupts; |
| adapter->handle_phy_intr = netxen_nic_xgbe_handle_phy_intr; |
| adapter->macaddr_set = netxen_niu_xg_macaddr_set; |
| adapter->set_mtu = netxen_nic_set_mtu_xgb; |
| adapter->init_port = netxen_niu_xg_init_port; |
| adapter->set_promisc = netxen_niu_xg_set_promiscuous_mode; |
| adapter->unset_promisc = netxen_niu_xg_set_promiscuous_mode; |
| adapter->stop_port = netxen_niu_disable_xg_port; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /* |
| * netxen_decode_crb_addr(0 - utility to translate from internal Phantom CRB |
| * address to external PCI CRB address. |
| */ |
| u32 netxen_decode_crb_addr(u32 addr) |
| { |
| int i; |
| u32 base_addr, offset, pci_base; |
| |
| crb_addr_transform_setup(); |
| |
| pci_base = NETXEN_ADDR_ERROR; |
| base_addr = addr & 0xfff00000; |
| offset = addr & 0x000fffff; |
| |
| for (i = 0; i < NETXEN_MAX_CRB_XFORM; i++) { |
| if (crb_addr_xform[i] == base_addr) { |
| pci_base = i << 20; |
| break; |
| } |
| } |
| if (pci_base == NETXEN_ADDR_ERROR) |
| return pci_base; |
| else |
| return (pci_base + offset); |
| } |
| |
| static long rom_max_timeout = 100; |
| static long rom_lock_timeout = 10000; |
| static long rom_write_timeout = 700; |
| |
| static inline int rom_lock(struct netxen_adapter *adapter) |
| { |
| int iter; |
| u32 done = 0; |
| int timeout = 0; |
| |
| while (!done) { |
| /* acquire semaphore2 from PCI HW block */ |
| netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(PCIE_SEM2_LOCK), |
| &done); |
| if (done == 1) |
| break; |
| if (timeout >= rom_lock_timeout) |
| return -EIO; |
| |
| timeout++; |
| /* |
| * Yield CPU |
| */ |
| if (!in_atomic()) |
| schedule(); |
| else { |
| for (iter = 0; iter < 20; iter++) |
| cpu_relax(); /*This a nop instr on i386 */ |
| } |
| } |
| netxen_nic_reg_write(adapter, NETXEN_ROM_LOCK_ID, ROM_LOCK_DRIVER); |
| return 0; |
| } |
| |
| int netxen_wait_rom_done(struct netxen_adapter *adapter) |
| { |
| long timeout = 0; |
| long done = 0; |
| |
| while (done == 0) { |
| done = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_GLB_STATUS); |
| done &= 2; |
| timeout++; |
| if (timeout >= rom_max_timeout) { |
| printk("Timeout reached waiting for rom done"); |
| return -EIO; |
| } |
| } |
| return 0; |
| } |
| |
| static inline int netxen_rom_wren(struct netxen_adapter *adapter) |
| { |
| /* Set write enable latch in ROM status register */ |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, |
| M25P_INSTR_WREN); |
| if (netxen_wait_rom_done(adapter)) { |
| return -1; |
| } |
| return 0; |
| } |
| |
| static inline unsigned int netxen_rdcrbreg(struct netxen_adapter *adapter, |
| unsigned int addr) |
| { |
| unsigned int data = 0xdeaddead; |
| data = netxen_nic_reg_read(adapter, addr); |
| return data; |
| } |
| |
| static inline int netxen_do_rom_rdsr(struct netxen_adapter *adapter) |
| { |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, |
| M25P_INSTR_RDSR); |
| if (netxen_wait_rom_done(adapter)) { |
| return -1; |
| } |
| return netxen_rdcrbreg(adapter, NETXEN_ROMUSB_ROM_RDATA); |
| } |
| |
| static inline void netxen_rom_unlock(struct netxen_adapter *adapter) |
| { |
| u32 val; |
| |
| /* release semaphore2 */ |
| netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(PCIE_SEM2_UNLOCK), &val); |
| |
| } |
| |
| int netxen_rom_wip_poll(struct netxen_adapter *adapter) |
| { |
| long timeout = 0; |
| long wip = 1; |
| int val; |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); |
| while (wip != 0) { |
| val = netxen_do_rom_rdsr(adapter); |
| wip = val & 1; |
| timeout++; |
| if (timeout > rom_max_timeout) { |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| static inline int do_rom_fast_write(struct netxen_adapter *adapter, int addr, |
| int data) |
| { |
| if (netxen_rom_wren(adapter)) { |
| return -1; |
| } |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_WDATA, data); |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr); |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3); |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, |
| M25P_INSTR_PP); |
| if (netxen_wait_rom_done(adapter)) { |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); |
| return -1; |
| } |
| |
| return netxen_rom_wip_poll(adapter); |
| } |
| |
| static inline int |
| do_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp) |
| { |
| if (jiffies > (last_schedule_time + (8 * HZ))) { |
| last_schedule_time = jiffies; |
| schedule(); |
| } |
| |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr); |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3); |
| udelay(100); /* prevent bursting on CRB */ |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb); |
| if (netxen_wait_rom_done(adapter)) { |
| printk("Error waiting for rom done\n"); |
| return -EIO; |
| } |
| /* reset abyte_cnt and dummy_byte_cnt */ |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); |
| udelay(100); /* prevent bursting on CRB */ |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); |
| |
| *valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA); |
| return 0; |
| } |
| |
| static inline int |
| do_rom_fast_read_words(struct netxen_adapter *adapter, int addr, |
| u8 *bytes, size_t size) |
| { |
| int addridx; |
| int ret = 0; |
| |
| for (addridx = addr; addridx < (addr + size); addridx += 4) { |
| ret = do_rom_fast_read(adapter, addridx, (int *)bytes); |
| if (ret != 0) |
| break; |
| bytes += 4; |
| } |
| |
| return ret; |
| } |
| |
| int |
| netxen_rom_fast_read_words(struct netxen_adapter *adapter, int addr, |
| u8 *bytes, size_t size) |
| { |
| int ret; |
| |
| ret = rom_lock(adapter); |
| if (ret < 0) |
| return ret; |
| |
| ret = do_rom_fast_read_words(adapter, addr, bytes, size); |
| |
| netxen_rom_unlock(adapter); |
| return ret; |
| } |
| |
| int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp) |
| { |
| int ret; |
| |
| if (rom_lock(adapter) != 0) |
| return -EIO; |
| |
| ret = do_rom_fast_read(adapter, addr, valp); |
| netxen_rom_unlock(adapter); |
| return ret; |
| } |
| |
| int netxen_rom_fast_write(struct netxen_adapter *adapter, int addr, int data) |
| { |
| int ret = 0; |
| |
| if (rom_lock(adapter) != 0) { |
| return -1; |
| } |
| ret = do_rom_fast_write(adapter, addr, data); |
| netxen_rom_unlock(adapter); |
| return ret; |
| } |
| |
| static inline int do_rom_fast_write_words(struct netxen_adapter *adapter, |
| int addr, u8 *bytes, size_t size) |
| { |
| int addridx = addr; |
| int ret = 0; |
| |
| while (addridx < (addr + size)) { |
| int last_attempt = 0; |
| int timeout = 0; |
| int data; |
| |
| data = *(u32*)bytes; |
| |
| ret = do_rom_fast_write(adapter, addridx, data); |
| if (ret < 0) |
| return ret; |
| |
| while(1) { |
| int data1; |
| |
| ret = do_rom_fast_read(adapter, addridx, &data1); |
| if (ret < 0) |
| return ret; |
| |
| if (data1 == data) |
| break; |
| |
| if (timeout++ >= rom_write_timeout) { |
| if (last_attempt++ < 4) { |
| ret = do_rom_fast_write(adapter, |
| addridx, data); |
| if (ret < 0) |
| return ret; |
| } |
| else { |
| printk(KERN_INFO "Data write did not " |
| "succeed at address 0x%x\n", addridx); |
| break; |
| } |
| } |
| } |
| |
| bytes += 4; |
| addridx += 4; |
| } |
| |
| return ret; |
| } |
| |
| int netxen_rom_fast_write_words(struct netxen_adapter *adapter, int addr, |
| u8 *bytes, size_t size) |
| { |
| int ret = 0; |
| |
| ret = rom_lock(adapter); |
| if (ret < 0) |
| return ret; |
| |
| ret = do_rom_fast_write_words(adapter, addr, bytes, size); |
| netxen_rom_unlock(adapter); |
| |
| return ret; |
| } |
| |
| int netxen_rom_wrsr(struct netxen_adapter *adapter, int data) |
| { |
| int ret; |
| |
| ret = netxen_rom_wren(adapter); |
| if (ret < 0) |
| return ret; |
| |
| netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_ROM_WDATA, data); |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0x1); |
| |
| ret = netxen_wait_rom_done(adapter); |
| if (ret < 0) |
| return ret; |
| |
| return netxen_rom_wip_poll(adapter); |
| } |
| |
| int netxen_rom_rdsr(struct netxen_adapter *adapter) |
| { |
| int ret; |
| |
| ret = rom_lock(adapter); |
| if (ret < 0) |
| return ret; |
| |
| ret = netxen_do_rom_rdsr(adapter); |
| netxen_rom_unlock(adapter); |
| return ret; |
| } |
| |
| int netxen_backup_crbinit(struct netxen_adapter *adapter) |
| { |
| int ret = FLASH_SUCCESS; |
| int val; |
| char *buffer = kmalloc(FLASH_SECTOR_SIZE, GFP_KERNEL); |
| |
| if (!buffer) |
| return -ENOMEM; |
| /* unlock sector 63 */ |
| val = netxen_rom_rdsr(adapter); |
| val = val & 0xe3; |
| ret = netxen_rom_wrsr(adapter, val); |
| if (ret != FLASH_SUCCESS) |
| goto out_kfree; |
| |
| ret = netxen_rom_wip_poll(adapter); |
| if (ret != FLASH_SUCCESS) |
| goto out_kfree; |
| |
| /* copy sector 0 to sector 63 */ |
| ret = netxen_rom_fast_read_words(adapter, CRBINIT_START, |
| buffer, FLASH_SECTOR_SIZE); |
| if (ret != FLASH_SUCCESS) |
| goto out_kfree; |
| |
| ret = netxen_rom_fast_write_words(adapter, FIXED_START, |
| buffer, FLASH_SECTOR_SIZE); |
| if (ret != FLASH_SUCCESS) |
| goto out_kfree; |
| |
| /* lock sector 63 */ |
| val = netxen_rom_rdsr(adapter); |
| if (!(val & 0x8)) { |
| val |= (0x1 << 2); |
| /* lock sector 63 */ |
| if (netxen_rom_wrsr(adapter, val) == 0) { |
| ret = netxen_rom_wip_poll(adapter); |
| if (ret != FLASH_SUCCESS) |
| goto out_kfree; |
| |
| /* lock SR writes */ |
| ret = netxen_rom_wip_poll(adapter); |
| if (ret != FLASH_SUCCESS) |
| goto out_kfree; |
| } |
| } |
| |
| out_kfree: |
| kfree(buffer); |
| return ret; |
| } |
| |
| int netxen_do_rom_se(struct netxen_adapter *adapter, int addr) |
| { |
| netxen_rom_wren(adapter); |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr); |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3); |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, |
| M25P_INSTR_SE); |
| if (netxen_wait_rom_done(adapter)) { |
| netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0); |
| return -1; |
| } |
| return netxen_rom_wip_poll(adapter); |
| } |
| |
| void check_erased_flash(struct netxen_adapter *adapter, int addr) |
| { |
| int i; |
| int val; |
| int count = 0, erased_errors = 0; |
| int range; |
| |
| range = (addr == USER_START) ? FIXED_START : addr + FLASH_SECTOR_SIZE; |
| |
| for (i = addr; i < range; i += 4) { |
| netxen_rom_fast_read(adapter, i, &val); |
| if (val != 0xffffffff) |
| erased_errors++; |
| count++; |
| } |
| |
| if (erased_errors) |
| printk(KERN_INFO "0x%x out of 0x%x words fail to be erased " |
| "for sector address: %x\n", erased_errors, count, addr); |
| } |
| |
| int netxen_rom_se(struct netxen_adapter *adapter, int addr) |
| { |
| int ret = 0; |
| if (rom_lock(adapter) != 0) { |
| return -1; |
| } |
| ret = netxen_do_rom_se(adapter, addr); |
| netxen_rom_unlock(adapter); |
| msleep(30); |
| check_erased_flash(adapter, addr); |
| |
| return ret; |
| } |
| |
| int |
| netxen_flash_erase_sections(struct netxen_adapter *adapter, int start, int end) |
| { |
| int ret = FLASH_SUCCESS; |
| int i; |
| |
| for (i = start; i < end; i++) { |
| ret = netxen_rom_se(adapter, i * FLASH_SECTOR_SIZE); |
| if (ret) |
| break; |
| ret = netxen_rom_wip_poll(adapter); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| int |
| netxen_flash_erase_secondary(struct netxen_adapter *adapter) |
| { |
| int ret = FLASH_SUCCESS; |
| int start, end; |
| |
| start = SECONDARY_START / FLASH_SECTOR_SIZE; |
| end = USER_START / FLASH_SECTOR_SIZE; |
| ret = netxen_flash_erase_sections(adapter, start, end); |
| |
| return ret; |
| } |
| |
| int |
| netxen_flash_erase_primary(struct netxen_adapter *adapter) |
| { |
| int ret = FLASH_SUCCESS; |
| int start, end; |
| |
| start = PRIMARY_START / FLASH_SECTOR_SIZE; |
| end = SECONDARY_START / FLASH_SECTOR_SIZE; |
| ret = netxen_flash_erase_sections(adapter, start, end); |
| |
| return ret; |
| } |
| |
| void netxen_halt_pegs(struct netxen_adapter *adapter) |
| { |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0x3c, 1); |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0x3c, 1); |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0x3c, 1); |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0x3c, 1); |
| } |
| |
| int netxen_flash_unlock(struct netxen_adapter *adapter) |
| { |
| int ret = 0; |
| |
| ret = netxen_rom_wrsr(adapter, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = netxen_rom_wren(adapter); |
| if (ret < 0) |
| return ret; |
| |
| return ret; |
| } |
| |
| #define NETXEN_BOARDTYPE 0x4008 |
| #define NETXEN_BOARDNUM 0x400c |
| #define NETXEN_CHIPNUM 0x4010 |
| #define NETXEN_ROMBUS_RESET 0xFFFFFFFF |
| #define NETXEN_ROM_FIRST_BARRIER 0x800000000ULL |
| #define NETXEN_ROM_FOUND_INIT 0x400 |
| |
| int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) |
| { |
| int addr, val, status; |
| int n, i; |
| int init_delay = 0; |
| struct crb_addr_pair *buf; |
| u32 off; |
| |
| /* resetall */ |
| status = netxen_nic_get_board_info(adapter); |
| if (status) |
| printk("%s: netxen_pinit_from_rom: Error getting board info\n", |
| netxen_nic_driver_name); |
| |
| netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET, |
| NETXEN_ROMBUS_RESET); |
| |
| if (verbose) { |
| int val; |
| if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0) |
| printk("P2 ROM board type: 0x%08x\n", val); |
| else |
| printk("Could not read board type\n"); |
| if (netxen_rom_fast_read(adapter, NETXEN_BOARDNUM, &val) == 0) |
| printk("P2 ROM board num: 0x%08x\n", val); |
| else |
| printk("Could not read board number\n"); |
| if (netxen_rom_fast_read(adapter, NETXEN_CHIPNUM, &val) == 0) |
| printk("P2 ROM chip num: 0x%08x\n", val); |
| else |
| printk("Could not read chip number\n"); |
| } |
| |
| if (netxen_rom_fast_read(adapter, 0, &n) == 0 |
| && (n & NETXEN_ROM_FIRST_BARRIER)) { |
| n &= ~NETXEN_ROM_ROUNDUP; |
| if (n < NETXEN_ROM_FOUND_INIT) { |
| if (verbose) |
| printk("%s: %d CRB init values found" |
| " in ROM.\n", netxen_nic_driver_name, n); |
| } else { |
| printk("%s:n=0x%x Error! NetXen card flash not" |
| " initialized.\n", __FUNCTION__, n); |
| return -EIO; |
| } |
| buf = kcalloc(n, sizeof(struct crb_addr_pair), GFP_KERNEL); |
| if (buf == NULL) { |
| printk("%s: netxen_pinit_from_rom: Unable to calloc " |
| "memory.\n", netxen_nic_driver_name); |
| return -ENOMEM; |
| } |
| for (i = 0; i < n; i++) { |
| if (netxen_rom_fast_read(adapter, 8 * i + 4, &val) != 0 |
| || netxen_rom_fast_read(adapter, 8 * i + 8, |
| &addr) != 0) |
| return -EIO; |
| |
| buf[i].addr = addr; |
| buf[i].data = val; |
| |
| if (verbose) |
| printk("%s: PCI: 0x%08x == 0x%08x\n", |
| netxen_nic_driver_name, (unsigned int) |
| netxen_decode_crb_addr(addr), val); |
| } |
| for (i = 0; i < n; i++) { |
| |
| off = netxen_decode_crb_addr(buf[i].addr); |
| if (off == NETXEN_ADDR_ERROR) { |
| printk(KERN_ERR"CRB init value out of range %x\n", |
| buf[i].addr); |
| continue; |
| } |
| off += NETXEN_PCI_CRBSPACE; |
| /* skipping cold reboot MAGIC */ |
| if (off == NETXEN_CAM_RAM(0x1fc)) |
| continue; |
| |
| /* After writing this register, HW needs time for CRB */ |
| /* to quiet down (else crb_window returns 0xffffffff) */ |
| if (off == NETXEN_ROMUSB_GLB_SW_RESET) { |
| init_delay = 1; |
| /* hold xdma in reset also */ |
| buf[i].data = NETXEN_NIC_XDMA_RESET; |
| } |
| |
| if (ADDR_IN_WINDOW1(off)) { |
| writel(buf[i].data, |
| NETXEN_CRB_NORMALIZE(adapter, off)); |
| } else { |
| netxen_nic_pci_change_crbwindow(adapter, 0); |
| writel(buf[i].data, |
| pci_base_offset(adapter, off)); |
| |
| netxen_nic_pci_change_crbwindow(adapter, 1); |
| } |
| if (init_delay == 1) { |
| ssleep(1); |
| init_delay = 0; |
| } |
| msleep(1); |
| } |
| kfree(buf); |
| |
| /* disable_peg_cache_all */ |
| |
| /* unreset_net_cache */ |
| netxen_nic_hw_read_wx(adapter, NETXEN_ROMUSB_GLB_SW_RESET, &val, |
| 4); |
| netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET, |
| (val & 0xffffff0f)); |
| /* p2dn replyCount */ |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_CRB_PEG_NET_D + 0xec, 0x1e); |
| /* disable_peg_cache 0 */ |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_CRB_PEG_NET_D + 0x4c, 8); |
| /* disable_peg_cache 1 */ |
| netxen_crb_writelit_adapter(adapter, |
| NETXEN_CRB_PEG_NET_I + 0x4c, 8); |
| |
| /* peg_clr_all */ |
| |
| /* peg_clr 0 */ |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0x8, |
| 0); |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0xc, |
| 0); |
| /* peg_clr 1 */ |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0x8, |
| 0); |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0xc, |
| 0); |
| /* peg_clr 2 */ |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0x8, |
| 0); |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0xc, |
| 0); |
| /* peg_clr 3 */ |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0x8, |
| 0); |
| netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0xc, |
| 0); |
| } |
| return 0; |
| } |
| |
| int netxen_initialize_adapter_offload(struct netxen_adapter *adapter) |
| { |
| uint64_t addr; |
| uint32_t hi; |
| uint32_t lo; |
| |
| adapter->dummy_dma.addr = |
| pci_alloc_consistent(adapter->ahw.pdev, |
| NETXEN_HOST_DUMMY_DMA_SIZE, |
| &adapter->dummy_dma.phys_addr); |
| if (adapter->dummy_dma.addr == NULL) { |
| printk("%s: ERROR: Could not allocate dummy DMA memory\n", |
| __FUNCTION__); |
| return -ENOMEM; |
| } |
| |
| addr = (uint64_t) adapter->dummy_dma.phys_addr; |
| hi = (addr >> 32) & 0xffffffff; |
| lo = addr & 0xffffffff; |
| |
| writel(hi, NETXEN_CRB_NORMALIZE(adapter, CRB_HOST_DUMMY_BUF_ADDR_HI)); |
| writel(lo, NETXEN_CRB_NORMALIZE(adapter, CRB_HOST_DUMMY_BUF_ADDR_LO)); |
| |
| return 0; |
| } |
| |
| void netxen_free_adapter_offload(struct netxen_adapter *adapter) |
| { |
| if (adapter->dummy_dma.addr) { |
| writel(0, NETXEN_CRB_NORMALIZE(adapter, |
| CRB_HOST_DUMMY_BUF_ADDR_HI)); |
| writel(0, NETXEN_CRB_NORMALIZE(adapter, |
| CRB_HOST_DUMMY_BUF_ADDR_LO)); |
| pci_free_consistent(adapter->ahw.pdev, |
| NETXEN_HOST_DUMMY_DMA_SIZE, |
| adapter->dummy_dma.addr, |
| adapter->dummy_dma.phys_addr); |
| adapter->dummy_dma.addr = NULL; |
| } |
| } |
| |
| void netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val) |
| { |
| u32 val = 0; |
| int loops = 0; |
| |
| if (!pegtune_val) { |
| val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); |
| while (val != PHAN_INITIALIZE_COMPLETE && |
| val != PHAN_INITIALIZE_ACK && loops < 200000) { |
| udelay(100); |
| schedule(); |
| val = |
| readl(NETXEN_CRB_NORMALIZE |
| (adapter, CRB_CMDPEG_STATE)); |
| loops++; |
| } |
| if (val != PHAN_INITIALIZE_COMPLETE) |
| printk("WARNING: Initial boot wait loop failed...\n"); |
| } |
| } |
| |
| int netxen_nic_rx_has_work(struct netxen_adapter *adapter) |
| { |
| int ctx; |
| |
| for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { |
| struct netxen_recv_context *recv_ctx = |
| &(adapter->recv_ctx[ctx]); |
| u32 consumer; |
| struct status_desc *desc_head; |
| struct status_desc *desc; |
| |
| consumer = recv_ctx->status_rx_consumer; |
| desc_head = recv_ctx->rcv_status_desc_head; |
| desc = &desc_head[consumer]; |
| |
| if (netxen_get_sts_owner(desc) & STATUS_OWNER_HOST) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static inline int netxen_nic_check_temp(struct netxen_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| uint32_t temp, temp_state, temp_val; |
| int rv = 0; |
| |
| temp = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_TEMP_STATE)); |
| |
| temp_state = nx_get_temp_state(temp); |
| temp_val = nx_get_temp_val(temp); |
| |
| if (temp_state == NX_TEMP_PANIC) { |
| printk(KERN_ALERT |
| "%s: Device temperature %d degrees C exceeds" |
| " maximum allowed. Hardware has been shut down.\n", |
| netxen_nic_driver_name, temp_val); |
| |
| netif_carrier_off(netdev); |
| netif_stop_queue(netdev); |
| rv = 1; |
| } else if (temp_state == NX_TEMP_WARN) { |
| if (adapter->temp == NX_TEMP_NORMAL) { |
| printk(KERN_ALERT |
| "%s: Device temperature %d degrees C " |
| "exceeds operating range." |
| " Immediate action needed.\n", |
| netxen_nic_driver_name, temp_val); |
| } |
| } else { |
| if (adapter->temp == NX_TEMP_WARN) { |
| printk(KERN_INFO |
| "%s: Device temperature is now %d degrees C" |
| " in normal range.\n", netxen_nic_driver_name, |
| temp_val); |
| } |
| } |
| adapter->temp = temp_state; |
| return rv; |
| } |
| |
| void netxen_watchdog_task(struct work_struct *work) |
| { |
| struct net_device *netdev; |
| struct netxen_adapter *adapter = |
| container_of(work, struct netxen_adapter, watchdog_task); |
| |
| if ((adapter->portnum == 0) && netxen_nic_check_temp(adapter)) |
| return; |
| |
| netdev = adapter->netdev; |
| if ((netif_running(netdev)) && !netif_carrier_ok(netdev)) { |
| printk(KERN_INFO "%s port %d, %s carrier is now ok\n", |
| netxen_nic_driver_name, adapter->portnum, netdev->name); |
| netif_carrier_on(netdev); |
| } |
| |
| if (netif_queue_stopped(netdev)) |
| netif_wake_queue(netdev); |
| |
| if (adapter->handle_phy_intr) |
| adapter->handle_phy_intr(adapter); |
| mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); |
| } |
| |
| /* |
| * netxen_process_rcv() send the received packet to the protocol stack. |
| * and if the number of receives exceeds RX_BUFFERS_REFILL, then we |
| * invoke the routine to send more rx buffers to the Phantom... |
| */ |
| void |
| netxen_process_rcv(struct netxen_adapter *adapter, int ctxid, |
| struct status_desc *desc) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| struct net_device *netdev = adapter->netdev; |
| int index = netxen_get_sts_refhandle(desc); |
| struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctxid]); |
| struct netxen_rx_buffer *buffer; |
| struct sk_buff *skb; |
| u32 length = netxen_get_sts_totallength(desc); |
| u32 desc_ctx; |
| struct netxen_rcv_desc_ctx *rcv_desc; |
| int ret; |
| |
| desc_ctx = netxen_get_sts_type(desc); |
| if (unlikely(desc_ctx >= NUM_RCV_DESC_RINGS)) { |
| printk("%s: %s Bad Rcv descriptor ring\n", |
| netxen_nic_driver_name, netdev->name); |
| return; |
| } |
| |
| rcv_desc = &recv_ctx->rcv_desc[desc_ctx]; |
| if (unlikely(index > rcv_desc->max_rx_desc_count)) { |
| DPRINTK(ERR, "Got a buffer index:%x Max is %x\n", |
| index, rcv_desc->max_rx_desc_count); |
| return; |
| } |
| buffer = &rcv_desc->rx_buf_arr[index]; |
| if (desc_ctx == RCV_DESC_LRO_CTXID) { |
| buffer->lro_current_frags++; |
| if (netxen_get_sts_desc_lro_last_frag(desc)) { |
| buffer->lro_expected_frags = |
| netxen_get_sts_desc_lro_cnt(desc); |
| buffer->lro_length = length; |
| } |
| if (buffer->lro_current_frags != buffer->lro_expected_frags) { |
| if (buffer->lro_expected_frags != 0) { |
| printk("LRO: (refhandle:%x) recv frag." |
| "wait for last. flags: %x expected:%d" |
| "have:%d\n", index, |
| netxen_get_sts_desc_lro_last_frag(desc), |
| buffer->lro_expected_frags, |
| buffer->lro_current_frags); |
| } |
| return; |
| } |
| } |
| |
| pci_unmap_single(pdev, buffer->dma, rcv_desc->dma_size, |
| PCI_DMA_FROMDEVICE); |
| |
| skb = (struct sk_buff *)buffer->skb; |
| |
| if (likely(netxen_get_sts_status(desc) == STATUS_CKSUM_OK)) { |
| adapter->stats.csummed++; |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| } |
| if (desc_ctx == RCV_DESC_LRO_CTXID) { |
| /* True length was only available on the last pkt */ |
| skb_put(skb, buffer->lro_length); |
| } else { |
| skb_put(skb, length); |
| } |
| |
| skb->protocol = eth_type_trans(skb, netdev); |
| |
| ret = netif_receive_skb(skb); |
| |
| /* |
| * RH: Do we need these stats on a regular basis. Can we get it from |
| * Linux stats. |
| */ |
| switch (ret) { |
| case NET_RX_SUCCESS: |
| adapter->stats.uphappy++; |
| break; |
| |
| case NET_RX_CN_LOW: |
| adapter->stats.uplcong++; |
| break; |
| |
| case NET_RX_CN_MOD: |
| adapter->stats.upmcong++; |
| break; |
| |
| case NET_RX_CN_HIGH: |
| adapter->stats.uphcong++; |
| break; |
| |
| case NET_RX_DROP: |
| adapter->stats.updropped++; |
| break; |
| |
| default: |
| adapter->stats.updunno++; |
| break; |
| } |
| |
| netdev->last_rx = jiffies; |
| |
| rcv_desc->rcv_free++; |
| rcv_desc->rcv_pending--; |
| |
| /* |
| * We just consumed one buffer so post a buffer. |
| */ |
| buffer->skb = NULL; |
| buffer->state = NETXEN_BUFFER_FREE; |
| buffer->lro_current_frags = 0; |
| buffer->lro_expected_frags = 0; |
| |
| adapter->stats.no_rcv++; |
| adapter->stats.rxbytes += length; |
| } |
| |
| /* Process Receive status ring */ |
| u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max) |
| { |
| struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctxid]); |
| struct status_desc *desc_head = recv_ctx->rcv_status_desc_head; |
| struct status_desc *desc; /* used to read status desc here */ |
| u32 consumer = recv_ctx->status_rx_consumer; |
| u32 producer = 0; |
| int count = 0, ring; |
| |
| DPRINTK(INFO, "procesing receive\n"); |
| /* |
| * we assume in this case that there is only one port and that is |
| * port #1...changes need to be done in firmware to indicate port |
| * number as part of the descriptor. This way we will be able to get |
| * the netdev which is associated with that device. |
| */ |
| while (count < max) { |
| desc = &desc_head[consumer]; |
| if (!(netxen_get_sts_owner(desc) & STATUS_OWNER_HOST)) { |
| DPRINTK(ERR, "desc %p ownedby %x\n", desc, |
| netxen_get_sts_owner(desc)); |
| break; |
| } |
| netxen_process_rcv(adapter, ctxid, desc); |
| netxen_clear_sts_owner(desc); |
| netxen_set_sts_owner(desc, STATUS_OWNER_PHANTOM); |
| consumer = (consumer + 1) & (adapter->max_rx_desc_count - 1); |
| count++; |
| } |
| if (count) { |
| for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) { |
| netxen_post_rx_buffers_nodb(adapter, ctxid, ring); |
| } |
| } |
| |
| /* update the consumer index in phantom */ |
| if (count) { |
| recv_ctx->status_rx_consumer = consumer; |
| recv_ctx->status_rx_producer = producer; |
| |
| /* Window = 1 */ |
| writel(consumer, |
| NETXEN_CRB_NORMALIZE(adapter, |
| recv_crb_registers[ctxid]. |
| crb_rcv_status_consumer)); |
| } |
| |
| return count; |
| } |
| |
| /* Process Command status ring */ |
| int netxen_process_cmd_ring(unsigned long data) |
| { |
| u32 last_consumer; |
| u32 consumer; |
| struct netxen_adapter *adapter = (struct netxen_adapter *)data; |
| int count1 = 0; |
| int count2 = 0; |
| struct netxen_cmd_buffer *buffer; |
| struct pci_dev *pdev; |
| struct netxen_skb_frag *frag; |
| u32 i; |
| struct sk_buff *skb = NULL; |
| int done; |
| |
| spin_lock(&adapter->tx_lock); |
| last_consumer = adapter->last_cmd_consumer; |
| DPRINTK(INFO, "procesing xmit complete\n"); |
| /* we assume in this case that there is only one port and that is |
| * port #1...changes need to be done in firmware to indicate port |
| * number as part of the descriptor. This way we will be able to get |
| * the netdev which is associated with that device. |
| */ |
| |
| consumer = le32_to_cpu(*(adapter->cmd_consumer)); |
| if (last_consumer == consumer) { /* Ring is empty */ |
| DPRINTK(INFO, "last_consumer %d == consumer %d\n", |
| last_consumer, consumer); |
| spin_unlock(&adapter->tx_lock); |
| return 1; |
| } |
| |
| adapter->proc_cmd_buf_counter++; |
| /* |
| * Not needed - does not seem to be used anywhere. |
| * adapter->cmd_consumer = consumer; |
| */ |
| spin_unlock(&adapter->tx_lock); |
| |
| while ((last_consumer != consumer) && (count1 < MAX_STATUS_HANDLE)) { |
| buffer = &adapter->cmd_buf_arr[last_consumer]; |
| pdev = adapter->pdev; |
| frag = &buffer->frag_array[0]; |
| skb = buffer->skb; |
| if (skb && (cmpxchg(&buffer->skb, skb, 0) == skb)) { |
| pci_unmap_single(pdev, frag->dma, frag->length, |
| PCI_DMA_TODEVICE); |
| for (i = 1; i < buffer->frag_count; i++) { |
| DPRINTK(INFO, "getting fragment no %d\n", i); |
| frag++; /* Get the next frag */ |
| pci_unmap_page(pdev, frag->dma, frag->length, |
| PCI_DMA_TODEVICE); |
| } |
| |
| adapter->stats.skbfreed++; |
| dev_kfree_skb_any(skb); |
| skb = NULL; |
| } else if (adapter->proc_cmd_buf_counter == 1) { |
| adapter->stats.txnullskb++; |
| } |
| if (unlikely(netif_queue_stopped(adapter->netdev) |
| && netif_carrier_ok(adapter->netdev)) |
| && ((jiffies - adapter->netdev->trans_start) > |
| adapter->netdev->watchdog_timeo)) { |
| SCHEDULE_WORK(&adapter->tx_timeout_task); |
| } |
| |
| last_consumer = get_next_index(last_consumer, |
| adapter->max_tx_desc_count); |
| count1++; |
| } |
| |
| count2 = 0; |
| spin_lock(&adapter->tx_lock); |
| if ((--adapter->proc_cmd_buf_counter) == 0) { |
| adapter->last_cmd_consumer = last_consumer; |
| while ((adapter->last_cmd_consumer != consumer) |
| && (count2 < MAX_STATUS_HANDLE)) { |
| buffer = |
| &adapter->cmd_buf_arr[adapter->last_cmd_consumer]; |
| count2++; |
| if (buffer->skb) |
| break; |
| else |
| adapter->last_cmd_consumer = |
| get_next_index(adapter->last_cmd_consumer, |
| adapter->max_tx_desc_count); |
| } |
| } |
| if (count1 || count2) { |
| if (netif_queue_stopped(adapter->netdev) |
| && (adapter->flags & NETXEN_NETDEV_STATUS)) { |
| netif_wake_queue(adapter->netdev); |
| adapter->flags &= ~NETXEN_NETDEV_STATUS; |
| } |
| } |
| /* |
| * If everything is freed up to consumer then check if the ring is full |
| * If the ring is full then check if more needs to be freed and |
| * schedule the call back again. |
| * |
| * This happens when there are 2 CPUs. One could be freeing and the |
| * other filling it. If the ring is full when we get out of here and |
| * the card has already interrupted the host then the host can miss the |
| * interrupt. |
| * |
| * There is still a possible race condition and the host could miss an |
| * interrupt. The card has to take care of this. |
| */ |
| if (adapter->last_cmd_consumer == consumer && |
| (((adapter->cmd_producer + 1) % |
| adapter->max_tx_desc_count) == adapter->last_cmd_consumer)) { |
| consumer = le32_to_cpu(*(adapter->cmd_consumer)); |
| } |
| done = (adapter->last_cmd_consumer == consumer); |
| |
| spin_unlock(&adapter->tx_lock); |
| DPRINTK(INFO, "last consumer is %d in %s\n", last_consumer, |
| __FUNCTION__); |
| return (done); |
| } |
| |
| /* |
| * netxen_post_rx_buffers puts buffer in the Phantom memory |
| */ |
| void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid) |
| { |
| struct pci_dev *pdev = adapter->ahw.pdev; |
| struct sk_buff *skb; |
| struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctx]); |
| struct netxen_rcv_desc_ctx *rcv_desc = NULL; |
| uint producer; |
| struct rcv_desc *pdesc; |
| struct netxen_rx_buffer *buffer; |
| int count = 0; |
| int index = 0; |
| netxen_ctx_msg msg = 0; |
| dma_addr_t dma; |
| |
| rcv_desc = &recv_ctx->rcv_desc[ringid]; |
| |
| producer = rcv_desc->producer; |
| index = rcv_desc->begin_alloc; |
| buffer = &rcv_desc->rx_buf_arr[index]; |
| /* We can start writing rx descriptors into the phantom memory. */ |
| while (buffer->state == NETXEN_BUFFER_FREE) { |
| skb = dev_alloc_skb(rcv_desc->skb_size); |
| if (unlikely(!skb)) { |
| /* |
| * TODO |
| * We need to schedule the posting of buffers to the pegs. |
| */ |
| rcv_desc->begin_alloc = index; |
| DPRINTK(ERR, "netxen_post_rx_buffers: " |
| " allocated only %d buffers\n", count); |
| break; |
| } |
| |
| count++; /* now there should be no failure */ |
| pdesc = &rcv_desc->desc_head[producer]; |
| |
| #if defined(XGB_DEBUG) |
| *(unsigned long *)(skb->head) = 0xc0debabe; |
| if (skb_is_nonlinear(skb)) { |
| printk("Allocated SKB @%p is nonlinear\n"); |
| } |
| #endif |
| skb_reserve(skb, 2); |
| /* This will be setup when we receive the |
| * buffer after it has been filled FSL TBD TBD |
| * skb->dev = netdev; |
| */ |
| dma = pci_map_single(pdev, skb->data, rcv_desc->dma_size, |
| PCI_DMA_FROMDEVICE); |
| pdesc->addr_buffer = cpu_to_le64(dma); |
| buffer->skb = skb; |
| buffer->state = NETXEN_BUFFER_BUSY; |
| buffer->dma = dma; |
| /* make a rcv descriptor */ |
| pdesc->reference_handle = cpu_to_le16(buffer->ref_handle); |
| pdesc->buffer_length = cpu_to_le32(rcv_desc->dma_size); |
| DPRINTK(INFO, "done writing descripter\n"); |
| producer = |
| get_next_index(producer, rcv_desc->max_rx_desc_count); |
| index = get_next_index(index, rcv_desc->max_rx_desc_count); |
| buffer = &rcv_desc->rx_buf_arr[index]; |
| } |
| /* if we did allocate buffers, then write the count to Phantom */ |
| if (count) { |
| rcv_desc->begin_alloc = index; |
| rcv_desc->rcv_pending += count; |
| rcv_desc->producer = producer; |
| if (rcv_desc->rcv_free >= 32) { |
| rcv_desc->rcv_free = 0; |
| /* Window = 1 */ |
| writel((producer - 1) & |
| (rcv_desc->max_rx_desc_count - 1), |
| NETXEN_CRB_NORMALIZE(adapter, |
| recv_crb_registers[ |
| adapter->portnum]. |
| rcv_desc_crb[ringid]. |
| crb_rcv_producer_offset)); |
| /* |
| * Write a doorbell msg to tell phanmon of change in |
| * receive ring producer |
| */ |
| netxen_set_msg_peg_id(msg, NETXEN_RCV_PEG_DB_ID); |
| netxen_set_msg_privid(msg); |
| netxen_set_msg_count(msg, |
| ((producer - |
| 1) & (rcv_desc-> |
| max_rx_desc_count - 1))); |
| netxen_set_msg_ctxid(msg, adapter->portnum); |
| netxen_set_msg_opcode(msg, NETXEN_RCV_PRODUCER(ringid)); |
| writel(msg, |
| DB_NORMALIZE(adapter, |
| NETXEN_RCV_PRODUCER_OFFSET)); |
| } |
| } |
| } |
| |
| void netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter, uint32_t ctx, |
| uint32_t ringid) |
| { |
| struct pci_dev *pdev = adapter->ahw.pdev; |
| struct sk_buff *skb; |
| struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctx]); |
| struct netxen_rcv_desc_ctx *rcv_desc = NULL; |
| u32 producer; |
| struct rcv_desc *pdesc; |
| struct netxen_rx_buffer *buffer; |
| int count = 0; |
| int index = 0; |
| |
| rcv_desc = &recv_ctx->rcv_desc[ringid]; |
| |
| producer = rcv_desc->producer; |
| index = rcv_desc->begin_alloc; |
| buffer = &rcv_desc->rx_buf_arr[index]; |
| /* We can start writing rx descriptors into the phantom memory. */ |
| while (buffer->state == NETXEN_BUFFER_FREE) { |
| skb = dev_alloc_skb(rcv_desc->skb_size); |
| if (unlikely(!skb)) { |
| /* |
| * We need to schedule the posting of buffers to the pegs. |
| */ |
| rcv_desc->begin_alloc = index; |
| DPRINTK(ERR, "netxen_post_rx_buffers_nodb: " |
| " allocated only %d buffers\n", count); |
| break; |
| } |
| count++; /* now there should be no failure */ |
| pdesc = &rcv_desc->desc_head[producer]; |
| skb_reserve(skb, 2); |
| /* |
| * This will be setup when we receive the |
| * buffer after it has been filled |
| * skb->dev = netdev; |
| */ |
| buffer->skb = skb; |
| buffer->state = NETXEN_BUFFER_BUSY; |
| buffer->dma = pci_map_single(pdev, skb->data, |
| rcv_desc->dma_size, |
| PCI_DMA_FROMDEVICE); |
| |
| /* make a rcv descriptor */ |
| pdesc->reference_handle = cpu_to_le16(buffer->ref_handle); |
| pdesc->buffer_length = cpu_to_le32(rcv_desc->dma_size); |
| pdesc->addr_buffer = cpu_to_le64(buffer->dma); |
| DPRINTK(INFO, "done writing descripter\n"); |
| producer = |
| get_next_index(producer, rcv_desc->max_rx_desc_count); |
| index = get_next_index(index, rcv_desc->max_rx_desc_count); |
| buffer = &rcv_desc->rx_buf_arr[index]; |
| } |
| |
| /* if we did allocate buffers, then write the count to Phantom */ |
| if (count) { |
| rcv_desc->begin_alloc = index; |
| rcv_desc->rcv_pending += count; |
| rcv_desc->producer = producer; |
| if (rcv_desc->rcv_free >= 32) { |
| rcv_desc->rcv_free = 0; |
| /* Window = 1 */ |
| writel((producer - 1) & |
| (rcv_desc->max_rx_desc_count - 1), |
| NETXEN_CRB_NORMALIZE(adapter, |
| recv_crb_registers[ |
| adapter->portnum]. |
| rcv_desc_crb[ringid]. |
| crb_rcv_producer_offset)); |
| wmb(); |
| } |
| } |
| } |
| |
| int netxen_nic_tx_has_work(struct netxen_adapter *adapter) |
| { |
| if (find_diff_among(adapter->last_cmd_consumer, |
| adapter->cmd_producer, |
| adapter->max_tx_desc_count) > 0) |
| return 1; |
| |
| return 0; |
| } |
| |
| |
| void netxen_nic_clear_stats(struct netxen_adapter *adapter) |
| { |
| memset(&adapter->stats, 0, sizeof(adapter->stats)); |
| return; |
| } |
| |