| /* |
| * Copyright 2007, Olof Johansson, PA Semi |
| * |
| * Based on arch/powerpc/sysdev/mpic_u3msi.c: |
| * |
| * Copyright 2006, Segher Boessenkool, IBM Corporation. |
| * Copyright 2006-2007, Michael Ellerman, IBM Corporation. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; version 2 of the |
| * License. |
| * |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/irq.h> |
| #include <linux/bootmem.h> |
| #include <linux/msi.h> |
| #include <asm/mpic.h> |
| #include <asm/prom.h> |
| #include <asm/hw_irq.h> |
| #include <asm/ppc-pci.h> |
| |
| #include "mpic.h" |
| |
| /* Allocate 16 interrupts per device, to give an alignment of 16, |
| * since that's the size of the grouping w.r.t. affinity. If someone |
| * needs more than 32 MSI's down the road we'll have to rethink this, |
| * but it should be OK for now. |
| */ |
| #define ALLOC_CHUNK 16 |
| |
| #define PASEMI_MSI_ADDR 0xfc080000 |
| |
| /* A bit ugly, can we get this from the pci_dev somehow? */ |
| static struct mpic *msi_mpic; |
| |
| |
| static void mpic_pasemi_msi_mask_irq(unsigned int irq) |
| { |
| pr_debug("mpic_pasemi_msi_mask_irq %d\n", irq); |
| mask_msi_irq(irq); |
| mpic_mask_irq(irq); |
| } |
| |
| static void mpic_pasemi_msi_unmask_irq(unsigned int irq) |
| { |
| pr_debug("mpic_pasemi_msi_unmask_irq %d\n", irq); |
| mpic_unmask_irq(irq); |
| unmask_msi_irq(irq); |
| } |
| |
| static struct irq_chip mpic_pasemi_msi_chip = { |
| .shutdown = mpic_pasemi_msi_mask_irq, |
| .mask = mpic_pasemi_msi_mask_irq, |
| .unmask = mpic_pasemi_msi_unmask_irq, |
| .eoi = mpic_end_irq, |
| .set_type = mpic_set_irq_type, |
| .set_affinity = mpic_set_affinity, |
| .typename = "PASEMI-MSI ", |
| }; |
| |
| static int pasemi_msi_check_device(struct pci_dev *pdev, int nvec, int type) |
| { |
| if (type == PCI_CAP_ID_MSIX) |
| pr_debug("pasemi_msi: MSI-X untested, trying anyway\n"); |
| |
| return 0; |
| } |
| |
| static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev) |
| { |
| struct msi_desc *entry; |
| |
| pr_debug("pasemi_msi_teardown_msi_irqs, pdev %p\n", pdev); |
| |
| list_for_each_entry(entry, &pdev->msi_list, list) { |
| if (entry->irq == NO_IRQ) |
| continue; |
| |
| set_irq_msi(entry->irq, NULL); |
| mpic_msi_free_hwirqs(msi_mpic, virq_to_hw(entry->irq), |
| ALLOC_CHUNK); |
| irq_dispose_mapping(entry->irq); |
| } |
| |
| return; |
| } |
| |
| static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) |
| { |
| irq_hw_number_t hwirq; |
| unsigned int virq; |
| struct msi_desc *entry; |
| struct msi_msg msg; |
| int ret; |
| |
| pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n", |
| pdev, nvec, type); |
| |
| msg.address_hi = 0; |
| msg.address_lo = PASEMI_MSI_ADDR; |
| |
| list_for_each_entry(entry, &pdev->msi_list, list) { |
| /* Allocate 16 interrupts for now, since that's the grouping for |
| * affinity. This can be changed later if it turns out 32 is too |
| * few MSIs for someone, but restrictions will apply to how the |
| * sources can be changed independently. |
| */ |
| ret = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK); |
| hwirq = ret; |
| if (ret < 0) { |
| pr_debug("pasemi_msi: failed allocating hwirq\n"); |
| return hwirq; |
| } |
| |
| virq = irq_create_mapping(msi_mpic->irqhost, hwirq); |
| if (virq == NO_IRQ) { |
| pr_debug("pasemi_msi: failed mapping hwirq 0x%lx\n", hwirq); |
| mpic_msi_free_hwirqs(msi_mpic, hwirq, ALLOC_CHUNK); |
| return -ENOSPC; |
| } |
| |
| /* Vector on MSI is really an offset, the hardware adds |
| * it to the value written at the magic address. So set |
| * it to 0 to remain sane. |
| */ |
| mpic_set_vector(virq, 0); |
| |
| set_irq_msi(virq, entry); |
| set_irq_chip(virq, &mpic_pasemi_msi_chip); |
| set_irq_type(virq, IRQ_TYPE_EDGE_RISING); |
| |
| pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%lx) addr 0x%x\n", |
| virq, hwirq, msg.address_lo); |
| |
| /* Likewise, the device writes [0...511] into the target |
| * register to generate MSI [512...1023] |
| */ |
| msg.data = hwirq-0x200; |
| write_msi_msg(virq, &msg); |
| } |
| |
| return 0; |
| } |
| |
| int mpic_pasemi_msi_init(struct mpic *mpic) |
| { |
| int rc; |
| |
| if (!mpic->irqhost->of_node || |
| !of_device_is_compatible(mpic->irqhost->of_node, |
| "pasemi,pwrficient-openpic")) |
| return -ENODEV; |
| |
| rc = mpic_msi_init_allocator(mpic); |
| if (rc) { |
| pr_debug("pasemi_msi: Error allocating bitmap!\n"); |
| return rc; |
| } |
| |
| pr_debug("pasemi_msi: Registering PA Semi MPIC MSI callbacks\n"); |
| |
| msi_mpic = mpic; |
| WARN_ON(ppc_md.setup_msi_irqs); |
| ppc_md.setup_msi_irqs = pasemi_msi_setup_msi_irqs; |
| ppc_md.teardown_msi_irqs = pasemi_msi_teardown_msi_irqs; |
| ppc_md.msi_check_device = pasemi_msi_check_device; |
| |
| return 0; |
| } |