| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/clocksource.h> |
| #include <linux/time.h> |
| #include <linux/acpi.h> |
| #include <linux/cpufreq.h> |
| |
| #include <asm/timex.h> |
| |
| static int notsc __initdata = 0; |
| |
| unsigned int cpu_khz; /* TSC clocks / usec, not used here */ |
| EXPORT_SYMBOL(cpu_khz); |
| |
| static unsigned int cyc2ns_scale __read_mostly; |
| |
| void set_cyc2ns_scale(unsigned long khz) |
| { |
| cyc2ns_scale = (NSEC_PER_MSEC << NS_SCALE) / khz; |
| } |
| |
| static unsigned long long cycles_2_ns(unsigned long long cyc) |
| { |
| return (cyc * cyc2ns_scale) >> NS_SCALE; |
| } |
| |
| unsigned long long sched_clock(void) |
| { |
| unsigned long a = 0; |
| |
| /* Could do CPU core sync here. Opteron can execute rdtsc speculatively, |
| * which means it is not completely exact and may not be monotonous |
| * between CPUs. But the errors should be too small to matter for |
| * scheduling purposes. |
| */ |
| |
| rdtscll(a); |
| return cycles_2_ns(a); |
| } |
| |
| static int tsc_unstable; |
| |
| static inline int check_tsc_unstable(void) |
| { |
| return tsc_unstable; |
| } |
| #ifdef CONFIG_CPU_FREQ |
| |
| /* Frequency scaling support. Adjust the TSC based timer when the cpu frequency |
| * changes. |
| * |
| * RED-PEN: On SMP we assume all CPUs run with the same frequency. It's |
| * not that important because current Opteron setups do not support |
| * scaling on SMP anyroads. |
| * |
| * Should fix up last_tsc too. Currently gettimeofday in the |
| * first tick after the change will be slightly wrong. |
| */ |
| |
| #include <linux/workqueue.h> |
| |
| static unsigned int cpufreq_delayed_issched = 0; |
| static unsigned int cpufreq_init = 0; |
| static struct work_struct cpufreq_delayed_get_work; |
| |
| static void handle_cpufreq_delayed_get(struct work_struct *v) |
| { |
| unsigned int cpu; |
| for_each_online_cpu(cpu) { |
| cpufreq_get(cpu); |
| } |
| cpufreq_delayed_issched = 0; |
| } |
| |
| static unsigned int ref_freq = 0; |
| static unsigned long loops_per_jiffy_ref = 0; |
| |
| static unsigned long cpu_khz_ref = 0; |
| |
| static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, |
| void *data) |
| { |
| struct cpufreq_freqs *freq = data; |
| unsigned long *lpj, dummy; |
| |
| if (cpu_has(&cpu_data[freq->cpu], X86_FEATURE_CONSTANT_TSC)) |
| return 0; |
| |
| lpj = &dummy; |
| if (!(freq->flags & CPUFREQ_CONST_LOOPS)) |
| #ifdef CONFIG_SMP |
| lpj = &cpu_data[freq->cpu].loops_per_jiffy; |
| #else |
| lpj = &boot_cpu_data.loops_per_jiffy; |
| #endif |
| |
| if (!ref_freq) { |
| ref_freq = freq->old; |
| loops_per_jiffy_ref = *lpj; |
| cpu_khz_ref = cpu_khz; |
| } |
| if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || |
| (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || |
| (val == CPUFREQ_RESUMECHANGE)) { |
| *lpj = |
| cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); |
| |
| cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new); |
| if (!(freq->flags & CPUFREQ_CONST_LOOPS)) |
| mark_tsc_unstable(); |
| } |
| |
| set_cyc2ns_scale(cpu_khz_ref); |
| |
| return 0; |
| } |
| |
| static struct notifier_block time_cpufreq_notifier_block = { |
| .notifier_call = time_cpufreq_notifier |
| }; |
| |
| static int __init cpufreq_tsc(void) |
| { |
| INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get); |
| if (!cpufreq_register_notifier(&time_cpufreq_notifier_block, |
| CPUFREQ_TRANSITION_NOTIFIER)) |
| cpufreq_init = 1; |
| return 0; |
| } |
| |
| core_initcall(cpufreq_tsc); |
| |
| #endif |
| |
| static int tsc_unstable = 0; |
| |
| /* |
| * Make an educated guess if the TSC is trustworthy and synchronized |
| * over all CPUs. |
| */ |
| __cpuinit int unsynchronized_tsc(void) |
| { |
| if (tsc_unstable) |
| return 1; |
| |
| #ifdef CONFIG_SMP |
| if (apic_is_clustered_box()) |
| return 1; |
| #endif |
| /* Most intel systems have synchronized TSCs except for |
| multi node systems */ |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) { |
| #ifdef CONFIG_ACPI |
| /* But TSC doesn't tick in C3 so don't use it there */ |
| if (acpi_gbl_FADT.header.length > 0 && acpi_gbl_FADT.C3latency < 1000) |
| return 1; |
| #endif |
| return 0; |
| } |
| |
| /* Assume multi socket systems are not synchronized */ |
| return num_present_cpus() > 1; |
| } |
| |
| int __init notsc_setup(char *s) |
| { |
| notsc = 1; |
| return 1; |
| } |
| |
| __setup("notsc", notsc_setup); |
| |
| |
| /* clock source code: */ |
| static cycle_t read_tsc(void) |
| { |
| cycle_t ret = (cycle_t)get_cycles_sync(); |
| return ret; |
| } |
| |
| static cycle_t __vsyscall_fn vread_tsc(void) |
| { |
| cycle_t ret = (cycle_t)get_cycles_sync(); |
| return ret; |
| } |
| |
| static struct clocksource clocksource_tsc = { |
| .name = "tsc", |
| .rating = 300, |
| .read = read_tsc, |
| .mask = CLOCKSOURCE_MASK(64), |
| .shift = 22, |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS | |
| CLOCK_SOURCE_MUST_VERIFY, |
| .vread = vread_tsc, |
| }; |
| |
| void mark_tsc_unstable(void) |
| { |
| if (!tsc_unstable) { |
| tsc_unstable = 1; |
| /* Change only the rating, when not registered */ |
| if (clocksource_tsc.mult) |
| clocksource_change_rating(&clocksource_tsc, 0); |
| else |
| clocksource_tsc.rating = 0; |
| } |
| } |
| EXPORT_SYMBOL_GPL(mark_tsc_unstable); |
| |
| void __init init_tsc_clocksource(void) |
| { |
| if (!notsc) { |
| clocksource_tsc.mult = clocksource_khz2mult(cpu_khz, |
| clocksource_tsc.shift); |
| if (check_tsc_unstable()) |
| clocksource_tsc.rating = 0; |
| |
| clocksource_register(&clocksource_tsc); |
| } |
| } |