| /* |
| * SBC8560 Device Tree Source |
| * |
| * Copyright 2007 Wind River Systems Inc. |
| * |
| * Paul Gortmaker (see MAINTAINERS for contact information) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "SBC8560"; |
| compatible = "SBC8560"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| ethernet2 = &enet2; |
| ethernet3 = &enet3; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8560@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <0x20>; // 32 bytes |
| i-cache-line-size = <0x20>; // 32 bytes |
| d-cache-size = <0x8000>; // L1, 32K |
| i-cache-size = <0x8000>; // L1, 32K |
| timebase-frequency = <0>; // From uboot |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x20000000>; |
| }; |
| |
| soc@ff700000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| ranges = <0x0 0xff700000 0x00100000>; |
| reg = <0xff700000 0x00100000>; |
| clock-frequency = <0>; |
| |
| memory-controller@2000 { |
| compatible = "fsl,8560-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <0x12 0x2>; |
| }; |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,8560-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <0x20>; // 32 bytes |
| cache-size = <0x40000>; // L2, 256K |
| interrupt-parent = <&mpic>; |
| interrupts = <0x10 0x2>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <0x2b 0x2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <0x2b 0x2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; |
| reg = <0x21300 0x4>; |
| ranges = <0x0 0x21100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,mpc8560-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <20 2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,mpc8560-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <21 2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,mpc8560-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <22 2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,mpc8560-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <23 2>; |
| }; |
| }; |
| |
| mdio@24520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-mdio"; |
| reg = <0x24520 0x20>; |
| phy0: ethernet-phy@19 { |
| interrupt-parent = <&mpic>; |
| interrupts = <0x6 0x1>; |
| reg = <0x19>; |
| device_type = "ethernet-phy"; |
| }; |
| phy1: ethernet-phy@1a { |
| interrupt-parent = <&mpic>; |
| interrupts = <0x7 0x1>; |
| reg = <0x1a>; |
| device_type = "ethernet-phy"; |
| }; |
| phy2: ethernet-phy@1b { |
| interrupt-parent = <&mpic>; |
| interrupts = <0x8 0x1>; |
| reg = <0x1b>; |
| device_type = "ethernet-phy"; |
| }; |
| phy3: ethernet-phy@1c { |
| interrupt-parent = <&mpic>; |
| interrupts = <0x8 0x1>; |
| reg = <0x1c>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| enet0: ethernet@24000 { |
| cell-index = <0>; |
| device_type = "network"; |
| model = "TSEC"; |
| compatible = "gianfar"; |
| reg = <0x24000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy0>; |
| }; |
| |
| enet1: ethernet@25000 { |
| cell-index = <1>; |
| device_type = "network"; |
| model = "TSEC"; |
| compatible = "gianfar"; |
| reg = <0x25000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy1>; |
| }; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| compatible = "chrp,open-pic"; |
| reg = <0x40000 0x40000>; |
| device_type = "open-pic"; |
| }; |
| |
| cpm@919c0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; |
| reg = <0x919c0 0x30>; |
| ranges; |
| |
| muram@80000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x80000 0x10000>; |
| |
| data@0 { |
| compatible = "fsl,cpm-muram-data"; |
| reg = <0x0 0x4000 0x9000 0x2000>; |
| }; |
| }; |
| |
| brg@919f0 { |
| compatible = "fsl,mpc8560-brg", |
| "fsl,cpm2-brg", |
| "fsl,cpm-brg"; |
| reg = <0x919f0 0x10 0x915f0 0x10>; |
| clock-frequency = <165000000>; |
| }; |
| |
| cpmpic: pic@90c00 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| interrupts = <0x2e 0x2>; |
| interrupt-parent = <&mpic>; |
| reg = <0x90c00 0x80>; |
| compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; |
| }; |
| |
| enet2: ethernet@91320 { |
| device_type = "network"; |
| compatible = "fsl,mpc8560-fcc-enet", |
| "fsl,cpm2-fcc-enet"; |
| reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| fsl,cpm-command = <0x16200300>; |
| interrupts = <0x21 0x8>; |
| interrupt-parent = <&cpmpic>; |
| phy-handle = <&phy2>; |
| }; |
| |
| enet3: ethernet@91340 { |
| device_type = "network"; |
| compatible = "fsl,mpc8560-fcc-enet", |
| "fsl,cpm2-fcc-enet"; |
| reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| fsl,cpm-command = <0x1a400300>; |
| interrupts = <0x22 0x8>; |
| interrupt-parent = <&cpmpic>; |
| phy-handle = <&phy3>; |
| }; |
| }; |
| |
| global-utilities@e0000 { |
| compatible = "fsl,mpc8560-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| }; |
| |
| pci0: pci@ff708000 { |
| cell-index = <0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; |
| device_type = "pci"; |
| reg = <0xff708000 0x1000>; |
| clock-frequency = <66666666>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x02 */ |
| 0x1000 0x0 0x0 0x1 &mpic 0x2 0x1 |
| 0x1000 0x0 0x0 0x2 &mpic 0x3 0x1 |
| 0x1000 0x0 0x0 0x3 &mpic 0x4 0x1 |
| 0x1000 0x0 0x0 0x4 &mpic 0x5 0x1>; |
| |
| interrupt-parent = <&mpic>; |
| interrupts = <0x18 0x2>; |
| bus-range = <0x0 0x0>; |
| ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 |
| 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; |
| }; |
| |
| localbus@ff705000 { |
| compatible = "fsl,mpc8560-localbus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| reg = <0xff705000 0x100>; // BRx, ORx, etc. |
| |
| ranges = < |
| 0x0 0x0 0xff800000 0x0800000 // 8MB boot flash |
| 0x1 0x0 0xe4000000 0x4000000 // 64MB flash |
| 0x3 0x0 0x20000000 0x4000000 // 64MB SDRAM |
| 0x4 0x0 0x24000000 0x4000000 // 64MB SDRAM |
| 0x5 0x0 0xfc000000 0x0c00000 // EPLD |
| 0x6 0x0 0xe0000000 0x4000000 // 64MB flash |
| 0x7 0x0 0x80000000 0x0200000 // ATM1,2 |
| >; |
| |
| epld@5,0 { |
| compatible = "wrs,epld-localbus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| reg = <0x5 0x0 0xc00000>; |
| ranges = < |
| 0x0 0x0 0x5 0x000000 0x1fff // LED disp. |
| 0x1 0x0 0x5 0x100000 0x1fff // switches |
| 0x2 0x0 0x5 0x200000 0x1fff // ID reg. |
| 0x3 0x0 0x5 0x300000 0x1fff // status reg. |
| 0x4 0x0 0x5 0x400000 0x1fff // reset reg. |
| 0x5 0x0 0x5 0x500000 0x1fff // Wind port |
| 0x7 0x0 0x5 0x700000 0x1fff // UART #1 |
| 0x8 0x0 0x5 0x800000 0x1fff // UART #2 |
| 0x9 0x0 0x5 0x900000 0x1fff // RTC |
| 0xb 0x0 0x5 0xb00000 0x1fff // EEPROM |
| >; |
| |
| bidr@2,0 { |
| compatible = "wrs,sbc8560-bidr"; |
| reg = <0x2 0x0 0x10>; |
| }; |
| |
| bcsr@3,0 { |
| compatible = "wrs,sbc8560-bcsr"; |
| reg = <0x3 0x0 0x10>; |
| }; |
| |
| brstcr@4,0 { |
| compatible = "wrs,sbc8560-brstcr"; |
| reg = <0x4 0x0 0x10>; |
| }; |
| |
| serial0: serial@7,0 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x7 0x0 0x100>; |
| clock-frequency = <1843200>; |
| interrupts = <0x9 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| serial1: serial@8,0 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x8 0x0 0x100>; |
| clock-frequency = <1843200>; |
| interrupts = <0xa 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| rtc@9,0 { |
| compatible = "m48t59"; |
| reg = <0x9 0x0 0x1fff>; |
| }; |
| }; |
| }; |
| }; |
