drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c - maze/linux - Git at Google

 /*
  * Copyright (C) 1999 - 2010 Intel Corporation.
  * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
  *
  * This code was derived from the Intel e1000e Linux driver.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  */

 #include "pch_gbe.h"
 #include <linux/module.h>	/* for __MODULE_STRING */

 #define OPTION_UNSET   -1
 #define OPTION_DISABLED 0
 #define OPTION_ENABLED  1

 /**
  * TxDescriptors - Transmit Descriptor Count
  * @Valid Range:   PCH_GBE_MIN_TXD - PCH_GBE_MAX_TXD
  * @Default Value: PCH_GBE_DEFAULT_TXD
  */
 static int TxDescriptors = OPTION_UNSET;
 module_param(TxDescriptors, int, 0);
 MODULE_PARM_DESC(TxDescriptors, "Number of transmit descriptors");

 /**
  * RxDescriptors -Receive Descriptor Count
  * @Valid Range:   PCH_GBE_MIN_RXD - PCH_GBE_MAX_RXD
  * @Default Value: PCH_GBE_DEFAULT_RXD
  */
 static int RxDescriptors = OPTION_UNSET;
 module_param(RxDescriptors, int, 0);
 MODULE_PARM_DESC(RxDescriptors, "Number of receive descriptors");

 /**
  * Speed - User Specified Speed Override
  * @Valid Range: 0, 10, 100, 1000
  *   - 0:    auto-negotiate at all supported speeds
  *   - 10:   only link at 10 Mbps
  *   - 100:  only link at 100 Mbps
  *   - 1000: only link at 1000 Mbps
  * @Default Value: 0
  */
 static int Speed = OPTION_UNSET;
 module_param(Speed, int, 0);
 MODULE_PARM_DESC(Speed, "Speed setting");

 /**
  * Duplex - User Specified Duplex Override
  * @Valid Range: 0-2
  *   - 0:  auto-negotiate for duplex
  *   - 1:  only link at half duplex
  *   - 2:  only link at full duplex
  * @Default Value: 0
  */
 static int Duplex = OPTION_UNSET;
 module_param(Duplex, int, 0);
 MODULE_PARM_DESC(Duplex, "Duplex setting");

 #define HALF_DUPLEX 1
 #define FULL_DUPLEX 2

 /**
  * AutoNeg - Auto-negotiation Advertisement Override
  * @Valid Range: 0x01-0x0F, 0x20-0x2F
  *
  *       The AutoNeg value is a bit mask describing which speed and duplex
  *       combinations should be advertised during auto-negotiation.
  *       The supported speed and duplex modes are listed below
  *
  *       Bit           7     6     5      4      3     2     1      0
  *       Speed (Mbps)  N/A   N/A   1000   N/A    100   100   10     10
  *       Duplex                    Full          Full  Half  Full   Half
  *
  * @Default Value: 0x2F (copper)
  */
 static int AutoNeg = OPTION_UNSET;
 module_param(AutoNeg, int, 0);
 MODULE_PARM_DESC(AutoNeg, "Advertised auto-negotiation setting");

 #define PHY_ADVERTISE_10_HALF      0x0001
 #define PHY_ADVERTISE_10_FULL      0x0002
 #define PHY_ADVERTISE_100_HALF     0x0004
 #define PHY_ADVERTISE_100_FULL     0x0008
 #define PHY_ADVERTISE_1000_HALF    0x0010 /* Not used, just FYI */
 #define PHY_ADVERTISE_1000_FULL    0x0020
 #define PCH_AUTONEG_ADVERTISE_DEFAULT   0x2F

 /**
  * FlowControl - User Specified Flow Control Override
  * @Valid Range: 0-3
  *    - 0:  No Flow Control
  *    - 1:  Rx only, respond to PAUSE frames but do not generate them
  *    - 2:  Tx only, generate PAUSE frames but ignore them on receive
  *    - 3:  Full Flow Control Support
  * @Default Value: Read flow control settings from the EEPROM
  */
 static int FlowControl = OPTION_UNSET;
 module_param(FlowControl, int, 0);
 MODULE_PARM_DESC(FlowControl, "Flow Control setting");

 /*
  * XsumRX - Receive Checksum Offload Enable/Disable
  * @Valid Range: 0, 1
  *    - 0:  disables all checksum offload
  *    - 1:  enables receive IP/TCP/UDP checksum offload
  * @Default Value: PCH_GBE_DEFAULT_RX_CSUM
  */
 static int XsumRX = OPTION_UNSET;
 module_param(XsumRX, int, 0);
 MODULE_PARM_DESC(XsumRX, "Disable or enable Receive Checksum offload");

 #define PCH_GBE_DEFAULT_RX_CSUM             true	/* trueorfalse */

 /*
  * XsumTX - Transmit Checksum Offload Enable/Disable
  * @Valid Range: 0, 1
  *    - 0:  disables all checksum offload
  *    - 1:  enables transmit IP/TCP/UDP checksum offload
  * @Default Value: PCH_GBE_DEFAULT_TX_CSUM
  */
 static int XsumTX = OPTION_UNSET;
 module_param(XsumTX, int, 0);
 MODULE_PARM_DESC(XsumTX, "Disable or enable Transmit Checksum offload");

 #define PCH_GBE_DEFAULT_TX_CSUM             true	/* trueorfalse */

 /**
  * pch_gbe_option - Force the MAC's flow control settings
  * @hw:	            Pointer to the HW structure
  * Returns
  *	0:			Successful.
  *	Negative value:		Failed.
  */
 struct pch_gbe_option {
 	enum { enable_option, range_option, list_option } type;
 	char *name;
 	char *err;
 	int  def;
 	union {
 		struct { /* range_option info */
 			int min;
 			int max;
 		} r;
 		struct { /* list_option info */
 			int nr;
 			const struct pch_gbe_opt_list { int i; char *str; } *p;
 		} l;
 	} arg;
 };

 static const struct pch_gbe_opt_list speed_list[] = {
 	{ 0, "" },
 	{ SPEED_10, "" },
 	{ SPEED_100, "" },
 	{ SPEED_1000, "" }
 };

 static const struct pch_gbe_opt_list dplx_list[] = {
 	{ 0, "" },
 	{ HALF_DUPLEX, "" },
 	{ FULL_DUPLEX, "" }
 };

 static const struct pch_gbe_opt_list an_list[] =
 	#define AA "AutoNeg advertising "
 	{{ 0x01, AA "10/HD" },
 	 { 0x02, AA "10/FD" },
 	 { 0x03, AA "10/FD, 10/HD" },
 	 { 0x04, AA "100/HD" },
 	 { 0x05, AA "100/HD, 10/HD" },
 	 { 0x06, AA "100/HD, 10/FD" },
 	 { 0x07, AA "100/HD, 10/FD, 10/HD" },
 	 { 0x08, AA "100/FD" },
 	 { 0x09, AA "100/FD, 10/HD" },
 	 { 0x0a, AA "100/FD, 10/FD" },
 	 { 0x0b, AA "100/FD, 10/FD, 10/HD" },
 	 { 0x0c, AA "100/FD, 100/HD" },
 	 { 0x0d, AA "100/FD, 100/HD, 10/HD" },
 	 { 0x0e, AA "100/FD, 100/HD, 10/FD" },
 	 { 0x0f, AA "100/FD, 100/HD, 10/FD, 10/HD" },
 	 { 0x20, AA "1000/FD" },
 	 { 0x21, AA "1000/FD, 10/HD" },
 	 { 0x22, AA "1000/FD, 10/FD" },
 	 { 0x23, AA "1000/FD, 10/FD, 10/HD" },
 	 { 0x24, AA "1000/FD, 100/HD" },
 	 { 0x25, AA "1000/FD, 100/HD, 10/HD" },
 	 { 0x26, AA "1000/FD, 100/HD, 10/FD" },
 	 { 0x27, AA "1000/FD, 100/HD, 10/FD, 10/HD" },
 	 { 0x28, AA "1000/FD, 100/FD" },
 	 { 0x29, AA "1000/FD, 100/FD, 10/HD" },
 	 { 0x2a, AA "1000/FD, 100/FD, 10/FD" },
 	 { 0x2b, AA "1000/FD, 100/FD, 10/FD, 10/HD" },
 	 { 0x2c, AA "1000/FD, 100/FD, 100/HD" },
 	 { 0x2d, AA "1000/FD, 100/FD, 100/HD, 10/HD" },
 	 { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
 	 { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }
 };

 static const struct pch_gbe_opt_list fc_list[] = {
 	{ PCH_GBE_FC_NONE, "Flow Control Disabled" },
 	{ PCH_GBE_FC_RX_PAUSE, "Flow Control Receive Only" },
 	{ PCH_GBE_FC_TX_PAUSE, "Flow Control Transmit Only" },
 	{ PCH_GBE_FC_FULL, "Flow Control Enabled" }
 };

 /**
  * pch_gbe_validate_option - Validate option
  * @value:    value
  * @opt:      option
  * @adapter:  Board private structure
  * Returns
  *	0:			Successful.
  *	Negative value:		Failed.
  */
 static int pch_gbe_validate_option(int *value,
 				    const struct pch_gbe_option *opt,
 				    struct pch_gbe_adapter *adapter)
 {
 	if (*value == OPTION_UNSET) {
 		*value = opt->def;
 		return 0;
 	}

 	switch (opt->type) {
 	case enable_option:
 		switch (*value) {
 		case OPTION_ENABLED:
 			pr_debug("%s Enabled\n", opt->name);
 			return 0;
 		case OPTION_DISABLED:
 			pr_debug("%s Disabled\n", opt->name);
 			return 0;
 		}
 		break;
 	case range_option:
 		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
 			pr_debug("%s set to %i\n", opt->name, *value);
 			return 0;
 		}
 		break;
 	case list_option: {
 		int i;
 		const struct pch_gbe_opt_list *ent;

 		for (i = 0; i < opt->arg.l.nr; i++) {
 			ent = &opt->arg.l.p[i];
 			if (*value == ent->i) {
 				if (ent->str[0] != '\0')
 					pr_debug("%s\n", ent->str);
 				return 0;
 			}
 		}
 	}
 		break;
 	default:
 		BUG();
 	}

 	pr_debug("Invalid %s value specified (%i) %s\n",
 		 opt->name, *value, opt->err);
 	*value = opt->def;
 	return -1;
 }

 /**
  * pch_gbe_check_copper_options - Range Checking for Link Options, Copper Version
  * @adapter:  Board private structure
  */
 static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter)
 {
 	struct pch_gbe_hw *hw = &adapter->hw;
 	int speed, dplx;

 	{ /* Speed */
 		static const struct pch_gbe_option opt = {
 			.type = list_option,
 			.name = "Speed",
 			.err  = "parameter ignored",
 			.def  = 0,
 			.arg  = { .l = { .nr = (int)ARRAY_SIZE(speed_list),
 					 .p = speed_list } }
 		};
 		speed = Speed;
 		pch_gbe_validate_option(&speed, &opt, adapter);
 	}
 	{ /* Duplex */
 		static const struct pch_gbe_option opt = {
 			.type = list_option,
 			.name = "Duplex",
 			.err  = "parameter ignored",
 			.def  = 0,
 			.arg  = { .l = { .nr = (int)ARRAY_SIZE(dplx_list),
 					 .p = dplx_list } }
 		};
 		dplx = Duplex;
 		pch_gbe_validate_option(&dplx, &opt, adapter);
 	}

 	{ /* Autoneg */
 		static const struct pch_gbe_option opt = {
 			.type = list_option,
 			.name = "AutoNeg",
 			.err  = "parameter ignored",
 			.def  = PCH_AUTONEG_ADVERTISE_DEFAULT,
 			.arg  = { .l = { .nr = (int)ARRAY_SIZE(an_list),
 					 .p = an_list} }
 		};
 		if (speed || dplx) {
 			pr_debug("AutoNeg specified along with Speed or Duplex, AutoNeg parameter ignored\n");
 			hw->phy.autoneg_advertised = opt.def;
 		} else {
 			hw->phy.autoneg_advertised = AutoNeg;
 			pch_gbe_validate_option(
 				(int *)(&hw->phy.autoneg_advertised),
 				&opt, adapter);
 		}
 	}

 	switch (speed + dplx) {
 	case 0:
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		if ((speed || dplx))
 			pr_debug("Speed and duplex autonegotiation enabled\n");
 		hw->mac.link_speed = SPEED_10;
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case HALF_DUPLEX:
 		pr_debug("Half Duplex specified without Speed\n");
 		pr_debug("Using Autonegotiation at Half Duplex only\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		hw->phy.autoneg_advertised = PHY_ADVERTISE_10_HALF |
 						PHY_ADVERTISE_100_HALF;
 		hw->mac.link_speed = SPEED_10;
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case FULL_DUPLEX:
 		pr_debug("Full Duplex specified without Speed\n");
 		pr_debug("Using Autonegotiation at Full Duplex only\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		hw->phy.autoneg_advertised = PHY_ADVERTISE_10_FULL |
 						PHY_ADVERTISE_100_FULL |
 						PHY_ADVERTISE_1000_FULL;
 		hw->mac.link_speed = SPEED_10;
 		hw->mac.link_duplex = DUPLEX_FULL;
 		break;
 	case SPEED_10:
 		pr_debug("10 Mbps Speed specified without Duplex\n");
 		pr_debug("Using Autonegotiation at 10 Mbps only\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		hw->phy.autoneg_advertised = PHY_ADVERTISE_10_HALF |
 						PHY_ADVERTISE_10_FULL;
 		hw->mac.link_speed = SPEED_10;
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case SPEED_10 + HALF_DUPLEX:
 		pr_debug("Forcing to 10 Mbps Half Duplex\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 0;
 		hw->phy.autoneg_advertised = 0;
 		hw->mac.link_speed = SPEED_10;
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case SPEED_10 + FULL_DUPLEX:
 		pr_debug("Forcing to 10 Mbps Full Duplex\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 0;
 		hw->phy.autoneg_advertised = 0;
 		hw->mac.link_speed = SPEED_10;
 		hw->mac.link_duplex = DUPLEX_FULL;
 		break;
 	case SPEED_100:
 		pr_debug("100 Mbps Speed specified without Duplex\n");
 		pr_debug("Using Autonegotiation at 100 Mbps only\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		hw->phy.autoneg_advertised = PHY_ADVERTISE_100_HALF |
 						PHY_ADVERTISE_100_FULL;
 		hw->mac.link_speed = SPEED_100;
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case SPEED_100 + HALF_DUPLEX:
 		pr_debug("Forcing to 100 Mbps Half Duplex\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 0;
 		hw->phy.autoneg_advertised = 0;
 		hw->mac.link_speed = SPEED_100;
 		hw->mac.link_duplex = DUPLEX_HALF;
 		break;
 	case SPEED_100 + FULL_DUPLEX:
 		pr_debug("Forcing to 100 Mbps Full Duplex\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 0;
 		hw->phy.autoneg_advertised = 0;
 		hw->mac.link_speed = SPEED_100;
 		hw->mac.link_duplex = DUPLEX_FULL;
 		break;
 	case SPEED_1000:
 		pr_debug("1000 Mbps Speed specified without Duplex\n");
 		goto full_duplex_only;
 	case SPEED_1000 + HALF_DUPLEX:
 		pr_debug("Half Duplex is not supported at 1000 Mbps\n");
 		/* fall through */
 	case SPEED_1000 + FULL_DUPLEX:
 full_duplex_only:
 		pr_debug("Using Autonegotiation at 1000 Mbps Full Duplex only\n");
 		hw->mac.autoneg = hw->mac.fc_autoneg = 1;
 		hw->phy.autoneg_advertised = PHY_ADVERTISE_1000_FULL;
 		hw->mac.link_speed = SPEED_1000;
 		hw->mac.link_duplex = DUPLEX_FULL;
 		break;
 	default:
 		BUG();
 	}
 }

 /**
  * pch_gbe_check_options - Range Checking for Command Line Parameters
  * @adapter:  Board private structure
  */
 void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
 {
 	struct pch_gbe_hw *hw = &adapter->hw;
 	struct net_device *dev = adapter->netdev;
 	int val;

 	{ /* Transmit Descriptor Count */
 		static const struct pch_gbe_option opt = {
 			.type = range_option,
 			.name = "Transmit Descriptors",
 			.err  = "using default of "
 				__MODULE_STRING(PCH_GBE_DEFAULT_TXD),
 			.def  = PCH_GBE_DEFAULT_TXD,
 			.arg  = { .r = { .min = PCH_GBE_MIN_TXD,
 					 .max = PCH_GBE_MAX_TXD } }
 		};
 		struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
 		tx_ring->count = TxDescriptors;
 		pch_gbe_validate_option(&tx_ring->count, &opt, adapter);
 		tx_ring->count = roundup(tx_ring->count,
 					PCH_GBE_TX_DESC_MULTIPLE);
 	}
 	{ /* Receive Descriptor Count */
 		static const struct pch_gbe_option opt = {
 			.type = range_option,
 			.name = "Receive Descriptors",
 			.err  = "using default of "
 				__MODULE_STRING(PCH_GBE_DEFAULT_RXD),
 			.def  = PCH_GBE_DEFAULT_RXD,
 			.arg  = { .r = { .min = PCH_GBE_MIN_RXD,
 					 .max = PCH_GBE_MAX_RXD } }
 		};
 		struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
 		rx_ring->count = RxDescriptors;
 		pch_gbe_validate_option(&rx_ring->count, &opt, adapter);
 		rx_ring->count = roundup(rx_ring->count,
 				PCH_GBE_RX_DESC_MULTIPLE);
 	}
 	{ /* Checksum Offload Enable/Disable */
 		static const struct pch_gbe_option opt = {
 			.type = enable_option,
 			.name = "Checksum Offload",
 			.err  = "defaulting to Enabled",
 			.def  = PCH_GBE_DEFAULT_RX_CSUM
 		};
 		val = XsumRX;
 		pch_gbe_validate_option(&val, &opt, adapter);
 		if (!val)
 			dev->features &= ~NETIF_F_RXCSUM;
 	}
 	{ /* Checksum Offload Enable/Disable */
 		static const struct pch_gbe_option opt = {
 			.type = enable_option,
 			.name = "Checksum Offload",
 			.err  = "defaulting to Enabled",
 			.def  = PCH_GBE_DEFAULT_TX_CSUM
 		};
 		val = XsumTX;
 		pch_gbe_validate_option(&val, &opt, adapter);
 		if (!val)
 			dev->features &= ~NETIF_F_ALL_CSUM;
 	}
 	{ /* Flow Control */
 		static const struct pch_gbe_option opt = {
 			.type = list_option,
 			.name = "Flow Control",
 			.err  = "reading default settings from EEPROM",
 			.def  = PCH_GBE_FC_DEFAULT,
 			.arg  = { .l = { .nr = (int)ARRAY_SIZE(fc_list),
 					 .p = fc_list } }
 		};
 		hw->mac.fc = FlowControl;
 		pch_gbe_validate_option((int *)(&hw->mac.fc),
 						&opt, adapter);
 	}

 	pch_gbe_check_copper_options(adapter);
 }
	/*
	* Copyright (C) 1999 - 2010 Intel Corporation.
	* Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
	*
	* This code was derived from the Intel e1000e Linux driver.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; version 2 of the License.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
	*/

	#include "pch_gbe.h"
	#include <linux/module.h> /* for __MODULE_STRING */

	#define OPTION_UNSET -1
	#define OPTION_DISABLED 0
	#define OPTION_ENABLED 1

	/**
	* TxDescriptors - Transmit Descriptor Count
	* @Valid Range: PCH_GBE_MIN_TXD - PCH_GBE_MAX_TXD
	* @Default Value: PCH_GBE_DEFAULT_TXD
	*/
	static int TxDescriptors = OPTION_UNSET;
	module_param(TxDescriptors, int, 0);
	MODULE_PARM_DESC(TxDescriptors, "Number of transmit descriptors");

	/**
	* RxDescriptors -Receive Descriptor Count
	* @Valid Range: PCH_GBE_MIN_RXD - PCH_GBE_MAX_RXD
	* @Default Value: PCH_GBE_DEFAULT_RXD
	*/
	static int RxDescriptors = OPTION_UNSET;
	module_param(RxDescriptors, int, 0);
	MODULE_PARM_DESC(RxDescriptors, "Number of receive descriptors");

	/**
	* Speed - User Specified Speed Override
	* @Valid Range: 0, 10, 100, 1000
	* - 0: auto-negotiate at all supported speeds
	* - 10: only link at 10 Mbps
	* - 100: only link at 100 Mbps
	* - 1000: only link at 1000 Mbps
	* @Default Value: 0
	*/
	static int Speed = OPTION_UNSET;
	module_param(Speed, int, 0);
	MODULE_PARM_DESC(Speed, "Speed setting");

	/**
	* Duplex - User Specified Duplex Override
	* @Valid Range: 0-2
	* - 0: auto-negotiate for duplex
	* - 1: only link at half duplex
	* - 2: only link at full duplex
	* @Default Value: 0
	*/
	static int Duplex = OPTION_UNSET;
	module_param(Duplex, int, 0);
	MODULE_PARM_DESC(Duplex, "Duplex setting");

	#define HALF_DUPLEX 1
	#define FULL_DUPLEX 2

	/**
	* AutoNeg - Auto-negotiation Advertisement Override
	* @Valid Range: 0x01-0x0F, 0x20-0x2F
	*
	* The AutoNeg value is a bit mask describing which speed and duplex
	* combinations should be advertised during auto-negotiation.
	* The supported speed and duplex modes are listed below
	*
	* Bit 7 6 5 4 3 2 1 0
	* Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
	* Duplex Full Full Half Full Half
	*
	* @Default Value: 0x2F (copper)
	*/
	static int AutoNeg = OPTION_UNSET;
	module_param(AutoNeg, int, 0);
	MODULE_PARM_DESC(AutoNeg, "Advertised auto-negotiation setting");

	#define PHY_ADVERTISE_10_HALF 0x0001
	#define PHY_ADVERTISE_10_FULL 0x0002
	#define PHY_ADVERTISE_100_HALF 0x0004
	#define PHY_ADVERTISE_100_FULL 0x0008
	#define PHY_ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
	#define PHY_ADVERTISE_1000_FULL 0x0020
	#define PCH_AUTONEG_ADVERTISE_DEFAULT 0x2F

	/**
	* FlowControl - User Specified Flow Control Override
	* @Valid Range: 0-3
	* - 0: No Flow Control
	* - 1: Rx only, respond to PAUSE frames but do not generate them
	* - 2: Tx only, generate PAUSE frames but ignore them on receive
	* - 3: Full Flow Control Support
	* @Default Value: Read flow control settings from the EEPROM
	*/
	static int FlowControl = OPTION_UNSET;
	module_param(FlowControl, int, 0);
	MODULE_PARM_DESC(FlowControl, "Flow Control setting");

	/*
	* XsumRX - Receive Checksum Offload Enable/Disable
	* @Valid Range: 0, 1
	* - 0: disables all checksum offload
	* - 1: enables receive IP/TCP/UDP checksum offload
	* @Default Value: PCH_GBE_DEFAULT_RX_CSUM
	*/
	static int XsumRX = OPTION_UNSET;
	module_param(XsumRX, int, 0);
	MODULE_PARM_DESC(XsumRX, "Disable or enable Receive Checksum offload");

	#define PCH_GBE_DEFAULT_RX_CSUM true /* trueorfalse */

	/*
	* XsumTX - Transmit Checksum Offload Enable/Disable
	* @Valid Range: 0, 1
	* - 0: disables all checksum offload
	* - 1: enables transmit IP/TCP/UDP checksum offload
	* @Default Value: PCH_GBE_DEFAULT_TX_CSUM
	*/
	static int XsumTX = OPTION_UNSET;
	module_param(XsumTX, int, 0);
	MODULE_PARM_DESC(XsumTX, "Disable or enable Transmit Checksum offload");

	#define PCH_GBE_DEFAULT_TX_CSUM true /* trueorfalse */

	/**
	* pch_gbe_option - Force the MAC's flow control settings
	* @hw: Pointer to the HW structure
	* Returns
	* 0: Successful.
	* Negative value: Failed.
	*/
	struct pch_gbe_option {
	enum { enable_option, range_option, list_option } type;
	char *name;
	char *err;
	int def;
	union {
	struct { /* range_option info */
	int min;
	int max;
	} r;
	struct { /* list_option info */
	int nr;
	const struct pch_gbe_opt_list { int i; char str; } p;
	} l;
	} arg;
	};

	static const struct pch_gbe_opt_list speed_list[] = {
	{ 0, "" },
	{ SPEED_10, "" },
	{ SPEED_100, "" },
	{ SPEED_1000, "" }
	};

	static const struct pch_gbe_opt_list dplx_list[] = {
	{ 0, "" },
	{ HALF_DUPLEX, "" },
	{ FULL_DUPLEX, "" }
	};

	static const struct pch_gbe_opt_list an_list[] =
	#define AA "AutoNeg advertising "
	{{ 0x01, AA "10/HD" },
	{ 0x02, AA "10/FD" },
	{ 0x03, AA "10/FD, 10/HD" },
	{ 0x04, AA "100/HD" },
	{ 0x05, AA "100/HD, 10/HD" },
	{ 0x06, AA "100/HD, 10/FD" },
	{ 0x07, AA "100/HD, 10/FD, 10/HD" },
	{ 0x08, AA "100/FD" },
	{ 0x09, AA "100/FD, 10/HD" },
	{ 0x0a, AA "100/FD, 10/FD" },
	{ 0x0b, AA "100/FD, 10/FD, 10/HD" },
	{ 0x0c, AA "100/FD, 100/HD" },
	{ 0x0d, AA "100/FD, 100/HD, 10/HD" },
	{ 0x0e, AA "100/FD, 100/HD, 10/FD" },
	{ 0x0f, AA "100/FD, 100/HD, 10/FD, 10/HD" },
	{ 0x20, AA "1000/FD" },
	{ 0x21, AA "1000/FD, 10/HD" },
	{ 0x22, AA "1000/FD, 10/FD" },
	{ 0x23, AA "1000/FD, 10/FD, 10/HD" },
	{ 0x24, AA "1000/FD, 100/HD" },
	{ 0x25, AA "1000/FD, 100/HD, 10/HD" },
	{ 0x26, AA "1000/FD, 100/HD, 10/FD" },
	{ 0x27, AA "1000/FD, 100/HD, 10/FD, 10/HD" },
	{ 0x28, AA "1000/FD, 100/FD" },
	{ 0x29, AA "1000/FD, 100/FD, 10/HD" },
	{ 0x2a, AA "1000/FD, 100/FD, 10/FD" },
	{ 0x2b, AA "1000/FD, 100/FD, 10/FD, 10/HD" },
	{ 0x2c, AA "1000/FD, 100/FD, 100/HD" },
	{ 0x2d, AA "1000/FD, 100/FD, 100/HD, 10/HD" },
	{ 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
	{ 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }
	};

	static const struct pch_gbe_opt_list fc_list[] = {
	{ PCH_GBE_FC_NONE, "Flow Control Disabled" },
	{ PCH_GBE_FC_RX_PAUSE, "Flow Control Receive Only" },
	{ PCH_GBE_FC_TX_PAUSE, "Flow Control Transmit Only" },
	{ PCH_GBE_FC_FULL, "Flow Control Enabled" }
	};

	/**
	* pch_gbe_validate_option - Validate option
	* @value: value
	* @opt: option
	* @adapter: Board private structure
	* Returns
	* 0: Successful.
	* Negative value: Failed.
	*/
	static int pch_gbe_validate_option(int *value,
	const struct pch_gbe_option *opt,
	struct pch_gbe_adapter *adapter)
	{
	if (*value == OPTION_UNSET) {
	*value = opt->def;
	return 0;
	}

	switch (opt->type) {
	case enable_option:
	switch (*value) {
	case OPTION_ENABLED:
	pr_debug("%s Enabled\n", opt->name);
	return 0;
	case OPTION_DISABLED:
	pr_debug("%s Disabled\n", opt->name);
	return 0;
	}
	break;
	case range_option:
	if (value >= opt->arg.r.min && value <= opt->arg.r.max) {
	pr_debug("%s set to %i\n", opt->name, *value);
	return 0;
	}
	break;
	case list_option: {
	int i;
	const struct pch_gbe_opt_list *ent;

	for (i = 0; i < opt->arg.l.nr; i++) {
	ent = &opt->arg.l.p[i];
	if (*value == ent->i) {
	if (ent->str[0] != '\0')
	pr_debug("%s\n", ent->str);
	return 0;
	}
	}
	}
	break;
	default:
	BUG();
	}

	pr_debug("Invalid %s value specified (%i) %s\n",
	opt->name, *value, opt->err);
	*value = opt->def;
	return -1;
	}

	/**
	* pch_gbe_check_copper_options - Range Checking for Link Options, Copper Version
	* @adapter: Board private structure
	*/
	static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter)
	{
	struct pch_gbe_hw *hw = &adapter->hw;
	int speed, dplx;

	{ /* Speed */
	static const struct pch_gbe_option opt = {
	.type = list_option,
	.name = "Speed",
	.err = "parameter ignored",
	.def = 0,
	.arg = { .l = { .nr = (int)ARRAY_SIZE(speed_list),
	.p = speed_list } }
	};
	speed = Speed;
	pch_gbe_validate_option(&speed, &opt, adapter);
	}
	{ /* Duplex */
	static const struct pch_gbe_option opt = {
	.type = list_option,
	.name = "Duplex",
	.err = "parameter ignored",
	.def = 0,
	.arg = { .l = { .nr = (int)ARRAY_SIZE(dplx_list),
	.p = dplx_list } }
	};
	dplx = Duplex;
	pch_gbe_validate_option(&dplx, &opt, adapter);
	}

	{ /* Autoneg */
	static const struct pch_gbe_option opt = {
	.type = list_option,
	.name = "AutoNeg",
	.err = "parameter ignored",
	.def = PCH_AUTONEG_ADVERTISE_DEFAULT,
	.arg = { .l = { .nr = (int)ARRAY_SIZE(an_list),
	.p = an_list} }
	};
	if (speed \|\| dplx) {
	pr_debug("AutoNeg specified along with Speed or Duplex, AutoNeg parameter ignored\n");
	hw->phy.autoneg_advertised = opt.def;
	} else {
	hw->phy.autoneg_advertised = AutoNeg;
	pch_gbe_validate_option(
	(int *)(&hw->phy.autoneg_advertised),
	&opt, adapter);
	}
	}

	switch (speed + dplx) {
	case 0:
	hw->mac.autoneg = hw->mac.fc_autoneg = 1;
	if ((speed \|\| dplx))
	pr_debug("Speed and duplex autonegotiation enabled\n");
	hw->mac.link_speed = SPEED_10;
	hw->mac.link_duplex = DUPLEX_HALF;
	break;
	case HALF_DUPLEX:
	pr_debug("Half Duplex specified without Speed\n");
	pr_debug("Using Autonegotiation at Half Duplex only\n");
	hw->mac.autoneg = hw->mac.fc_autoneg = 1;
	hw->phy.autoneg_advertised = PHY_ADVERTISE_10_HALF \|
	PHY_ADVERTISE_100_HALF;
	hw->mac.link_speed = SPEED_10;
	hw->mac.link_duplex = DUPLEX_HALF;
	break;
	case FULL_DUPLEX:
	pr_debug("Full Duplex specified without Speed\n");
	pr_debug("Using Autonegotiation at Full Duplex only\n");
	hw->mac.autoneg = hw->mac.fc_autoneg = 1;
	hw->phy.autoneg_advertised = PHY_ADVERTISE_10_FULL \|
	PHY_ADVERTISE_100_FULL \|
	PHY_ADVERTISE_1000_FULL;
	hw->mac.link_speed = SPEED_10;
	hw->mac.link_duplex = DUPLEX_FULL;
	break;
	case SPEED_10:
	pr_debug("10 Mbps Speed specified without Duplex\n");
	pr_debug("Using Autonegotiation at 10 Mbps only\n");
	hw->mac.autoneg = hw->mac.fc_autoneg = 1;
	hw->phy.autoneg_advertised = PHY_ADVERTISE_10_HALF \|
	PHY_ADVERTISE_10_FULL;
	hw->mac.link_speed = SPEED_10;
	hw->mac.link_duplex = DUPLEX_HALF;
	break;
	case SPEED_10 + HALF_DUPLEX:
	pr_debug("Forcing to 10 Mbps Half Duplex\n");
	hw->mac.autoneg = hw->mac.fc_autoneg = 0;
	hw->phy.autoneg_advertised = 0;
	hw->mac.link_speed = SPEED_10;
	hw->mac.link_duplex = DUPLEX_HALF;
	break;
	case SPEED_10 + FULL_DUPLEX:
	pr_debug("Forcing to 10 Mbps Full Duplex\n");
	hw->mac.autoneg = hw->mac.fc_autoneg = 0;
	hw->phy.autoneg_advertised = 0;
	hw->mac.link_speed = SPEED_10;
	hw->mac.link_duplex = DUPLEX_FULL;
	break;
	case SPEED_100:
	pr_debug("100 Mbps Speed specified without Duplex\n");
	pr_debug("Using Autonegotiation at 100 Mbps only\n");
	hw->mac.autoneg = hw->mac.fc_autoneg = 1;
	hw->phy.autoneg_advertised = PHY_ADVERTISE_100_HALF \|
	PHY_ADVERTISE_100_FULL;
	hw->mac.link_speed = SPEED_100;
	hw->mac.link_duplex = DUPLEX_HALF;
	break;
	case SPEED_100 + HALF_DUPLEX:
	pr_debug("Forcing to 100 Mbps Half Duplex\n");
	hw->mac.autoneg = hw->mac.fc_autoneg = 0;
	hw->phy.autoneg_advertised = 0;
	hw->mac.link_speed = SPEED_100;
	hw->mac.link_duplex = DUPLEX_HALF;
	break;
	case SPEED_100 + FULL_DUPLEX:
	pr_debug("Forcing to 100 Mbps Full Duplex\n");
	hw->mac.autoneg = hw->mac.fc_autoneg = 0;
	hw->phy.autoneg_advertised = 0;
	hw->mac.link_speed = SPEED_100;
	hw->mac.link_duplex = DUPLEX_FULL;
	break;
	case SPEED_1000:
	pr_debug("1000 Mbps Speed specified without Duplex\n");
	goto full_duplex_only;
	case SPEED_1000 + HALF_DUPLEX:
	pr_debug("Half Duplex is not supported at 1000 Mbps\n");
	/* fall through */
	case SPEED_1000 + FULL_DUPLEX:
	full_duplex_only:
	pr_debug("Using Autonegotiation at 1000 Mbps Full Duplex only\n");
	hw->mac.autoneg = hw->mac.fc_autoneg = 1;
	hw->phy.autoneg_advertised = PHY_ADVERTISE_1000_FULL;
	hw->mac.link_speed = SPEED_1000;
	hw->mac.link_duplex = DUPLEX_FULL;
	break;
	default:
	BUG();
	}
	}

	/**
	* pch_gbe_check_options - Range Checking for Command Line Parameters
	* @adapter: Board private structure
	*/
	void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
	{
	struct pch_gbe_hw *hw = &adapter->hw;
	struct net_device *dev = adapter->netdev;
	int val;

	{ /* Transmit Descriptor Count */
	static const struct pch_gbe_option opt = {
	.type = range_option,
	.name = "Transmit Descriptors",
	.err = "using default of "
	__MODULE_STRING(PCH_GBE_DEFAULT_TXD),
	.def = PCH_GBE_DEFAULT_TXD,
	.arg = { .r = { .min = PCH_GBE_MIN_TXD,
	.max = PCH_GBE_MAX_TXD } }
	};
	struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
	tx_ring->count = TxDescriptors;
	pch_gbe_validate_option(&tx_ring->count, &opt, adapter);
	tx_ring->count = roundup(tx_ring->count,
	PCH_GBE_TX_DESC_MULTIPLE);
	}
	{ /* Receive Descriptor Count */
	static const struct pch_gbe_option opt = {
	.type = range_option,
	.name = "Receive Descriptors",
	.err = "using default of "
	__MODULE_STRING(PCH_GBE_DEFAULT_RXD),
	.def = PCH_GBE_DEFAULT_RXD,
	.arg = { .r = { .min = PCH_GBE_MIN_RXD,
	.max = PCH_GBE_MAX_RXD } }
	};
	struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
	rx_ring->count = RxDescriptors;
	pch_gbe_validate_option(&rx_ring->count, &opt, adapter);
	rx_ring->count = roundup(rx_ring->count,
	PCH_GBE_RX_DESC_MULTIPLE);
	}
	{ /* Checksum Offload Enable/Disable */
	static const struct pch_gbe_option opt = {
	.type = enable_option,
	.name = "Checksum Offload",
	.err = "defaulting to Enabled",
	.def = PCH_GBE_DEFAULT_RX_CSUM
	};
	val = XsumRX;
	pch_gbe_validate_option(&val, &opt, adapter);
	if (!val)
	dev->features &= ~NETIF_F_RXCSUM;
	}
	{ /* Checksum Offload Enable/Disable */
	static const struct pch_gbe_option opt = {
	.type = enable_option,
	.name = "Checksum Offload",
	.err = "defaulting to Enabled",
	.def = PCH_GBE_DEFAULT_TX_CSUM
	};
	val = XsumTX;
	pch_gbe_validate_option(&val, &opt, adapter);
	if (!val)
	dev->features &= ~NETIF_F_ALL_CSUM;
	}
	{ /* Flow Control */
	static const struct pch_gbe_option opt = {
	.type = list_option,
	.name = "Flow Control",
	.err = "reading default settings from EEPROM",
	.def = PCH_GBE_FC_DEFAULT,
	.arg = { .l = { .nr = (int)ARRAY_SIZE(fc_list),
	.p = fc_list } }
	};
	hw->mac.fc = FlowControl;
	pch_gbe_validate_option((int *)(&hw->mac.fc),
	&opt, adapter);
	}

	pch_gbe_check_copper_options(adapter);
	}