| /* |
| * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com/ |
| * |
| * Copyright 2008 Openmoko, Inc. |
| * Copyright 2008 Simtec Electronics |
| * Ben Dooks <ben@simtec.co.uk> |
| * http://armlinux.simtec.co.uk/ |
| * |
| * SAMSUNG - GPIOlib support |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/sysdev.h> |
| #include <linux/ioport.h> |
| #include <linux/of.h> |
| #include <linux/slab.h> |
| #include <linux/of_address.h> |
| |
| #include <asm/irq.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/map.h> |
| #include <mach/regs-clock.h> |
| #include <mach/regs-gpio.h> |
| |
| #include <plat/cpu.h> |
| #include <plat/gpio-core.h> |
| #include <plat/gpio-cfg.h> |
| #include <plat/gpio-cfg-helpers.h> |
| #include <plat/gpio-fns.h> |
| #include <plat/pm.h> |
| |
| #ifndef DEBUG_GPIO |
| #define gpio_dbg(x...) do { } while (0) |
| #else |
| #define gpio_dbg(x...) printk(KERN_DEBUG x) |
| #endif |
| |
| int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, |
| unsigned int off, samsung_gpio_pull_t pull) |
| { |
| void __iomem *reg = chip->base + 0x08; |
| int shift = off * 2; |
| u32 pup; |
| |
| pup = __raw_readl(reg); |
| pup &= ~(3 << shift); |
| pup |= pull << shift; |
| __raw_writel(pup, reg); |
| |
| return 0; |
| } |
| |
| samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip, |
| unsigned int off) |
| { |
| void __iomem *reg = chip->base + 0x08; |
| int shift = off * 2; |
| u32 pup = __raw_readl(reg); |
| |
| pup >>= shift; |
| pup &= 0x3; |
| |
| return (__force samsung_gpio_pull_t)pup; |
| } |
| |
| int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip, |
| unsigned int off, samsung_gpio_pull_t pull) |
| { |
| switch (pull) { |
| case S3C_GPIO_PULL_NONE: |
| pull = 0x01; |
| break; |
| case S3C_GPIO_PULL_UP: |
| pull = 0x00; |
| break; |
| case S3C_GPIO_PULL_DOWN: |
| pull = 0x02; |
| break; |
| } |
| return samsung_gpio_setpull_updown(chip, off, pull); |
| } |
| |
| samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip, |
| unsigned int off) |
| { |
| samsung_gpio_pull_t pull; |
| |
| pull = samsung_gpio_getpull_updown(chip, off); |
| |
| switch (pull) { |
| case 0x00: |
| pull = S3C_GPIO_PULL_UP; |
| break; |
| case 0x01: |
| case 0x03: |
| pull = S3C_GPIO_PULL_NONE; |
| break; |
| case 0x02: |
| pull = S3C_GPIO_PULL_DOWN; |
| break; |
| } |
| |
| return pull; |
| } |
| |
| static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip, |
| unsigned int off, samsung_gpio_pull_t pull, |
| samsung_gpio_pull_t updown) |
| { |
| void __iomem *reg = chip->base + 0x08; |
| u32 pup = __raw_readl(reg); |
| |
| if (pull == updown) |
| pup &= ~(1 << off); |
| else if (pull == S3C_GPIO_PULL_NONE) |
| pup |= (1 << off); |
| else |
| return -EINVAL; |
| |
| __raw_writel(pup, reg); |
| return 0; |
| } |
| |
| static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip, |
| unsigned int off, |
| samsung_gpio_pull_t updown) |
| { |
| void __iomem *reg = chip->base + 0x08; |
| u32 pup = __raw_readl(reg); |
| |
| pup &= (1 << off); |
| return pup ? S3C_GPIO_PULL_NONE : updown; |
| } |
| |
| samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip, |
| unsigned int off) |
| { |
| return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); |
| } |
| |
| int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip, |
| unsigned int off, samsung_gpio_pull_t pull) |
| { |
| return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); |
| } |
| |
| samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip, |
| unsigned int off) |
| { |
| return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); |
| } |
| |
| int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip, |
| unsigned int off, samsung_gpio_pull_t pull) |
| { |
| return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); |
| } |
| |
| static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip, |
| unsigned int off, samsung_gpio_pull_t pull) |
| { |
| if (pull == S3C_GPIO_PULL_UP) |
| pull = 3; |
| |
| return samsung_gpio_setpull_updown(chip, off, pull); |
| } |
| |
| static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip, |
| unsigned int off) |
| { |
| samsung_gpio_pull_t pull; |
| |
| pull = samsung_gpio_getpull_updown(chip, off); |
| |
| if (pull == 3) |
| pull = S3C_GPIO_PULL_UP; |
| |
| return pull; |
| } |
| |
| /* |
| * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration. |
| * @chip: The gpio chip that is being configured. |
| * @off: The offset for the GPIO being configured. |
| * @cfg: The configuration value to set. |
| * |
| * This helper deal with the GPIO cases where the control register |
| * has two bits of configuration per gpio, which have the following |
| * functions: |
| * 00 = input |
| * 01 = output |
| * 1x = special function |
| */ |
| |
| static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip, |
| unsigned int off, unsigned int cfg) |
| { |
| void __iomem *reg = chip->base; |
| unsigned int shift = off * 2; |
| u32 con; |
| |
| if (samsung_gpio_is_cfg_special(cfg)) { |
| cfg &= 0xf; |
| if (cfg > 3) |
| return -EINVAL; |
| |
| cfg <<= shift; |
| } |
| |
| con = __raw_readl(reg); |
| con &= ~(0x3 << shift); |
| con |= cfg; |
| __raw_writel(con, reg); |
| |
| return 0; |
| } |
| |
| /* |
| * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read. |
| * @chip: The gpio chip that is being configured. |
| * @off: The offset for the GPIO being configured. |
| * |
| * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg |
| * could be directly passed back to samsung_gpio_setcfg_2bit(), from the |
| * S3C_GPIO_SPECIAL() macro. |
| */ |
| |
| static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip, |
| unsigned int off) |
| { |
| u32 con; |
| |
| con = __raw_readl(chip->base); |
| con >>= off * 2; |
| con &= 3; |
| |
| /* this conversion works for IN and OUT as well as special mode */ |
| return S3C_GPIO_SPECIAL(con); |
| } |
| |
| /* |
| * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config. |
| * @chip: The gpio chip that is being configured. |
| * @off: The offset for the GPIO being configured. |
| * @cfg: The configuration value to set. |
| * |
| * This helper deal with the GPIO cases where the control register has 4 bits |
| * of control per GPIO, generally in the form of: |
| * 0000 = Input |
| * 0001 = Output |
| * others = Special functions (dependent on bank) |
| * |
| * Note, since the code to deal with the case where there are two control |
| * registers instead of one, we do not have a separate set of functions for |
| * each case. |
| */ |
| |
| static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip, |
| unsigned int off, unsigned int cfg) |
| { |
| void __iomem *reg = chip->base; |
| unsigned int shift = (off & 7) * 4; |
| u32 con; |
| |
| if (off < 8 && chip->chip.ngpio > 8) |
| reg -= 4; |
| |
| if (samsung_gpio_is_cfg_special(cfg)) { |
| cfg &= 0xf; |
| cfg <<= shift; |
| } |
| |
| con = __raw_readl(reg); |
| con &= ~(0xf << shift); |
| con |= cfg; |
| __raw_writel(con, reg); |
| |
| return 0; |
| } |
| |
| /* |
| * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read. |
| * @chip: The gpio chip that is being configured. |
| * @off: The offset for the GPIO being configured. |
| * |
| * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration |
| * register setting into a value the software can use, such as could be passed |
| * to samsung_gpio_setcfg_4bit(). |
| * |
| * @sa samsung_gpio_getcfg_2bit |
| */ |
| |
| static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip, |
| unsigned int off) |
| { |
| void __iomem *reg = chip->base; |
| unsigned int shift = (off & 7) * 4; |
| u32 con; |
| |
| if (off < 8 && chip->chip.ngpio > 8) |
| reg -= 4; |
| |
| con = __raw_readl(reg); |
| con >>= shift; |
| con &= 0xf; |
| |
| /* this conversion works for IN and OUT as well as special mode */ |
| return S3C_GPIO_SPECIAL(con); |
| } |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| /* |
| * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A) |
| * @chip: The gpio chip that is being configured. |
| * @off: The offset for the GPIO being configured. |
| * @cfg: The configuration value to set. |
| * |
| * This helper deal with the GPIO cases where the control register |
| * has one bit of configuration for the gpio, where setting the bit |
| * means the pin is in special function mode and unset means output. |
| */ |
| |
| static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip, |
| unsigned int off, unsigned int cfg) |
| { |
| void __iomem *reg = chip->base; |
| unsigned int shift = off; |
| u32 con; |
| |
| if (samsung_gpio_is_cfg_special(cfg)) { |
| cfg &= 0xf; |
| |
| /* Map output to 0, and SFN2 to 1 */ |
| cfg -= 1; |
| if (cfg > 1) |
| return -EINVAL; |
| |
| cfg <<= shift; |
| } |
| |
| con = __raw_readl(reg); |
| con &= ~(0x1 << shift); |
| con |= cfg; |
| __raw_writel(con, reg); |
| |
| return 0; |
| } |
| |
| /* |
| * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A) |
| * @chip: The gpio chip that is being configured. |
| * @off: The offset for the GPIO being configured. |
| * |
| * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable |
| * GPIO configuration value. |
| * |
| * @sa samsung_gpio_getcfg_2bit |
| * @sa samsung_gpio_getcfg_4bit |
| */ |
| |
| static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip, |
| unsigned int off) |
| { |
| u32 con; |
| |
| con = __raw_readl(chip->base); |
| con >>= off; |
| con &= 1; |
| con++; |
| |
| return S3C_GPIO_SFN(con); |
| } |
| #endif |
| |
| #if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) |
| static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip, |
| unsigned int off, unsigned int cfg) |
| { |
| void __iomem *reg = chip->base; |
| unsigned int shift; |
| u32 con; |
| |
| switch (off) { |
| case 0: |
| case 1: |
| case 2: |
| case 3: |
| case 4: |
| case 5: |
| shift = (off & 7) * 4; |
| reg -= 4; |
| break; |
| case 6: |
| shift = ((off + 1) & 7) * 4; |
| reg -= 4; |
| default: |
| shift = ((off + 1) & 7) * 4; |
| break; |
| } |
| |
| if (samsung_gpio_is_cfg_special(cfg)) { |
| cfg &= 0xf; |
| cfg <<= shift; |
| } |
| |
| con = __raw_readl(reg); |
| con &= ~(0xf << shift); |
| con |= cfg; |
| __raw_writel(con, reg); |
| |
| return 0; |
| } |
| #endif |
| |
| static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg, |
| int nr_chips) |
| { |
| for (; nr_chips > 0; nr_chips--, chipcfg++) { |
| if (!chipcfg->set_config) |
| chipcfg->set_config = samsung_gpio_setcfg_4bit; |
| if (!chipcfg->get_config) |
| chipcfg->get_config = samsung_gpio_getcfg_4bit; |
| if (!chipcfg->set_pull) |
| chipcfg->set_pull = samsung_gpio_setpull_updown; |
| if (!chipcfg->get_pull) |
| chipcfg->get_pull = samsung_gpio_getpull_updown; |
| } |
| } |
| |
| struct samsung_gpio_cfg s3c24xx_gpiocfg_default = { |
| .set_config = samsung_gpio_setcfg_2bit, |
| .get_config = samsung_gpio_getcfg_2bit, |
| }; |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = { |
| .set_config = s3c24xx_gpio_setcfg_abank, |
| .get_config = s3c24xx_gpio_getcfg_abank, |
| }; |
| #endif |
| |
| static struct samsung_gpio_cfg exynos4_gpio_cfg = { |
| .set_pull = exynos4_gpio_setpull, |
| .get_pull = exynos4_gpio_getpull, |
| .set_config = samsung_gpio_setcfg_4bit, |
| .get_config = samsung_gpio_getcfg_4bit, |
| }; |
| |
| #if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) |
| static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = { |
| .cfg_eint = 0x3, |
| .set_config = s5p64x0_gpio_setcfg_rbank, |
| .get_config = samsung_gpio_getcfg_4bit, |
| .set_pull = samsung_gpio_setpull_updown, |
| .get_pull = samsung_gpio_getpull_updown, |
| }; |
| #endif |
| |
| static struct samsung_gpio_cfg samsung_gpio_cfgs[] = { |
| { |
| .cfg_eint = 0x0, |
| }, { |
| .cfg_eint = 0x3, |
| }, { |
| .cfg_eint = 0x7, |
| }, { |
| .cfg_eint = 0xF, |
| }, { |
| .cfg_eint = 0x0, |
| .set_config = samsung_gpio_setcfg_2bit, |
| .get_config = samsung_gpio_getcfg_2bit, |
| }, { |
| .cfg_eint = 0x2, |
| .set_config = samsung_gpio_setcfg_2bit, |
| .get_config = samsung_gpio_getcfg_2bit, |
| }, { |
| .cfg_eint = 0x3, |
| .set_config = samsung_gpio_setcfg_2bit, |
| .get_config = samsung_gpio_getcfg_2bit, |
| }, { |
| .set_config = samsung_gpio_setcfg_2bit, |
| .get_config = samsung_gpio_getcfg_2bit, |
| }, { |
| .set_pull = exynos4_gpio_setpull, |
| .get_pull = exynos4_gpio_getpull, |
| }, { |
| .cfg_eint = 0x3, |
| .set_pull = exynos4_gpio_setpull, |
| .get_pull = exynos4_gpio_getpull, |
| } |
| }; |
| |
| /* |
| * Default routines for controlling GPIO, based on the original S3C24XX |
| * GPIO functions which deal with the case where each gpio bank of the |
| * chip is as following: |
| * |
| * base + 0x00: Control register, 2 bits per gpio |
| * gpio n: 2 bits starting at (2*n) |
| * 00 = input, 01 = output, others mean special-function |
| * base + 0x04: Data register, 1 bit per gpio |
| * bit n: data bit n |
| */ |
| |
| static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset) |
| { |
| struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); |
| void __iomem *base = ourchip->base; |
| unsigned long flags; |
| unsigned long con; |
| |
| samsung_gpio_lock(ourchip, flags); |
| |
| con = __raw_readl(base + 0x00); |
| con &= ~(3 << (offset * 2)); |
| |
| __raw_writel(con, base + 0x00); |
| |
| samsung_gpio_unlock(ourchip, flags); |
| return 0; |
| } |
| |
| static int samsung_gpiolib_2bit_output(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); |
| void __iomem *base = ourchip->base; |
| unsigned long flags; |
| unsigned long dat; |
| unsigned long con; |
| |
| samsung_gpio_lock(ourchip, flags); |
| |
| dat = __raw_readl(base + 0x04); |
| dat &= ~(1 << offset); |
| if (value) |
| dat |= 1 << offset; |
| __raw_writel(dat, base + 0x04); |
| |
| con = __raw_readl(base + 0x00); |
| con &= ~(3 << (offset * 2)); |
| con |= 1 << (offset * 2); |
| |
| __raw_writel(con, base + 0x00); |
| __raw_writel(dat, base + 0x04); |
| |
| samsung_gpio_unlock(ourchip, flags); |
| return 0; |
| } |
| |
| /* |
| * The samsung_gpiolib_4bit routines are to control the gpio banks where |
| * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the |
| * following example: |
| * |
| * base + 0x00: Control register, 4 bits per gpio |
| * gpio n: 4 bits starting at (4*n) |
| * 0000 = input, 0001 = output, others mean special-function |
| * base + 0x04: Data register, 1 bit per gpio |
| * bit n: data bit n |
| * |
| * Note, since the data register is one bit per gpio and is at base + 0x4 |
| * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the |
| * state of the output. |
| */ |
| |
| static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, |
| unsigned int offset) |
| { |
| struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); |
| void __iomem *base = ourchip->base; |
| unsigned long con; |
| |
| con = __raw_readl(base + GPIOCON_OFF); |
| con &= ~(0xf << con_4bit_shift(offset)); |
| __raw_writel(con, base + GPIOCON_OFF); |
| |
| gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); |
| |
| return 0; |
| } |
| |
| static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, |
| unsigned int offset, int value) |
| { |
| struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); |
| void __iomem *base = ourchip->base; |
| unsigned long con; |
| unsigned long dat; |
| |
| con = __raw_readl(base + GPIOCON_OFF); |
| con &= ~(0xf << con_4bit_shift(offset)); |
| con |= 0x1 << con_4bit_shift(offset); |
| |
| dat = __raw_readl(base + GPIODAT_OFF); |
| |
| if (value) |
| dat |= 1 << offset; |
| else |
| dat &= ~(1 << offset); |
| |
| __raw_writel(dat, base + GPIODAT_OFF); |
| __raw_writel(con, base + GPIOCON_OFF); |
| __raw_writel(dat, base + GPIODAT_OFF); |
| |
| gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); |
| |
| return 0; |
| } |
| |
| /* |
| * The next set of routines are for the case where the GPIO configuration |
| * registers are 4 bits per GPIO but there is more than one register (the |
| * bank has more than 8 GPIOs. |
| * |
| * This case is the similar to the 4 bit case, but the registers are as |
| * follows: |
| * |
| * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) |
| * gpio n: 4 bits starting at (4*n) |
| * 0000 = input, 0001 = output, others mean special-function |
| * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) |
| * gpio n: 4 bits starting at (4*n) |
| * 0000 = input, 0001 = output, others mean special-function |
| * base + 0x08: Data register, 1 bit per gpio |
| * bit n: data bit n |
| * |
| * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set |
| * routines we store the 'base + 0x4' address so that these routines see |
| * the data register at ourchip->base + 0x04. |
| */ |
| |
| static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, |
| unsigned int offset) |
| { |
| struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); |
| void __iomem *base = ourchip->base; |
| void __iomem *regcon = base; |
| unsigned long con; |
| |
| if (offset > 7) |
| offset -= 8; |
| else |
| regcon -= 4; |
| |
| con = __raw_readl(regcon); |
| con &= ~(0xf << con_4bit_shift(offset)); |
| __raw_writel(con, regcon); |
| |
| gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); |
| |
| return 0; |
| } |
| |
| static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, |
| unsigned int offset, int value) |
| { |
| struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); |
| void __iomem *base = ourchip->base; |
| void __iomem *regcon = base; |
| unsigned long con; |
| unsigned long dat; |
| unsigned con_offset = offset; |
| |
| if (con_offset > 7) |
| con_offset -= 8; |
| else |
| regcon -= 4; |
| |
| con = __raw_readl(regcon); |
| con &= ~(0xf << con_4bit_shift(con_offset)); |
| con |= 0x1 << con_4bit_shift(con_offset); |
| |
| dat = __raw_readl(base + GPIODAT_OFF); |
| |
| if (value) |
| dat |= 1 << offset; |
| else |
| dat &= ~(1 << offset); |
| |
| __raw_writel(dat, base + GPIODAT_OFF); |
| __raw_writel(con, regcon); |
| __raw_writel(dat, base + GPIODAT_OFF); |
| |
| gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| /* The next set of routines are for the case of s3c24xx bank a */ |
| |
| static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) |
| { |
| return -EINVAL; |
| } |
| |
| static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); |
| void __iomem *base = ourchip->base; |
| unsigned long flags; |
| unsigned long dat; |
| unsigned long con; |
| |
| local_irq_save(flags); |
| |
| con = __raw_readl(base + 0x00); |
| dat = __raw_readl(base + 0x04); |
| |
| dat &= ~(1 << offset); |
| if (value) |
| dat |= 1 << offset; |
| |
| __raw_writel(dat, base + 0x04); |
| |
| con &= ~(1 << offset); |
| |
| __raw_writel(con, base + 0x00); |
| __raw_writel(dat, base + 0x04); |
| |
| local_irq_restore(flags); |
| return 0; |
| } |
| #endif |
| |
| /* The next set of routines are for the case of s5p64x0 bank r */ |
| |
| static int s5p64x0_gpiolib_rbank_input(struct gpio_chip *chip, |
| unsigned int offset) |
| { |
| struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); |
| void __iomem *base = ourchip->base; |
| void __iomem *regcon = base; |
| unsigned long con; |
| unsigned long flags; |
| |
| switch (offset) { |
| case 6: |
| offset += 1; |
| case 0: |
| case 1: |
| case 2: |
| case 3: |
| case 4: |
| case 5: |
| regcon -= 4; |
| break; |
| default: |
| offset -= 7; |
| break; |
| } |
| |
| samsung_gpio_lock(ourchip, flags); |
| |
| con = __raw_readl(regcon); |
| con &= ~(0xf << con_4bit_shift(offset)); |
| __raw_writel(con, regcon); |
| |
| samsung_gpio_unlock(ourchip, flags); |
| |
| return 0; |
| } |
| |
| static int s5p64x0_gpiolib_rbank_output(struct gpio_chip *chip, |
| unsigned int offset, int value) |
| { |
| struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); |
| void __iomem *base = ourchip->base; |
| void __iomem *regcon = base; |
| unsigned long con; |
| unsigned long dat; |
| unsigned long flags; |
| unsigned con_offset = offset; |
| |
| switch (con_offset) { |
| case 6: |
| con_offset += 1; |
| case 0: |
| case 1: |
| case 2: |
| case 3: |
| case 4: |
| case 5: |
| regcon -= 4; |
| break; |
| default: |
| con_offset -= 7; |
| break; |
| } |
| |
| samsung_gpio_lock(ourchip, flags); |
| |
| con = __raw_readl(regcon); |
| con &= ~(0xf << con_4bit_shift(con_offset)); |
| con |= 0x1 << con_4bit_shift(con_offset); |
| |
| dat = __raw_readl(base + GPIODAT_OFF); |
| if (value) |
| dat |= 1 << offset; |
| else |
| dat &= ~(1 << offset); |
| |
| __raw_writel(con, regcon); |
| __raw_writel(dat, base + GPIODAT_OFF); |
| |
| samsung_gpio_unlock(ourchip, flags); |
| |
| return 0; |
| } |
| |
| static void samsung_gpiolib_set(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); |
| void __iomem *base = ourchip->base; |
| unsigned long flags; |
| unsigned long dat; |
| |
| samsung_gpio_lock(ourchip, flags); |
| |
| dat = __raw_readl(base + 0x04); |
| dat &= ~(1 << offset); |
| if (value) |
| dat |= 1 << offset; |
| __raw_writel(dat, base + 0x04); |
| |
| samsung_gpio_unlock(ourchip, flags); |
| } |
| |
| static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); |
| unsigned long val; |
| |
| val = __raw_readl(ourchip->base + 0x04); |
| val >>= offset; |
| val &= 1; |
| |
| return val; |
| } |
| |
| /* |
| * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios |
| * for use with the configuration calls, and other parts of the s3c gpiolib |
| * support code. |
| * |
| * Not all s3c support code will need this, as some configurations of cpu |
| * may only support one or two different configuration options and have an |
| * easy gpio to samsung_gpio_chip mapping function. If this is the case, then |
| * the machine support file should provide its own samsung_gpiolib_getchip() |
| * and any other necessary functions. |
| */ |
| |
| #ifdef CONFIG_S3C_GPIO_TRACK |
| struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END]; |
| |
| static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip) |
| { |
| unsigned int gpn; |
| int i; |
| |
| gpn = chip->chip.base; |
| for (i = 0; i < chip->chip.ngpio; i++, gpn++) { |
| BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); |
| s3c_gpios[gpn] = chip; |
| } |
| } |
| #endif /* CONFIG_S3C_GPIO_TRACK */ |
| |
| /* |
| * samsung_gpiolib_add() - add the Samsung gpio_chip. |
| * @chip: The chip to register |
| * |
| * This is a wrapper to gpiochip_add() that takes our specific gpio chip |
| * information and makes the necessary alterations for the platform and |
| * notes the information for use with the configuration systems and any |
| * other parts of the system. |
| */ |
| |
| static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip) |
| { |
| struct gpio_chip *gc = &chip->chip; |
| int ret; |
| |
| BUG_ON(!chip->base); |
| BUG_ON(!gc->label); |
| BUG_ON(!gc->ngpio); |
| |
| spin_lock_init(&chip->lock); |
| |
| if (!gc->direction_input) |
| gc->direction_input = samsung_gpiolib_2bit_input; |
| if (!gc->direction_output) |
| gc->direction_output = samsung_gpiolib_2bit_output; |
| if (!gc->set) |
| gc->set = samsung_gpiolib_set; |
| if (!gc->get) |
| gc->get = samsung_gpiolib_get; |
| |
| #ifdef CONFIG_PM |
| if (chip->pm != NULL) { |
| if (!chip->pm->save || !chip->pm->resume) |
| printk(KERN_ERR "gpio: %s has missing PM functions\n", |
| gc->label); |
| } else |
| printk(KERN_ERR "gpio: %s has no PM function\n", gc->label); |
| #endif |
| |
| /* gpiochip_add() prints own failure message on error. */ |
| ret = gpiochip_add(gc); |
| if (ret >= 0) |
| s3c_gpiolib_track(chip); |
| } |
| |
| static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, |
| int nr_chips, void __iomem *base) |
| { |
| int i; |
| struct gpio_chip *gc = &chip->chip; |
| |
| for (i = 0 ; i < nr_chips; i++, chip++) { |
| /* skip banks not present on SoC */ |
| if (chip->chip.base >= S3C_GPIO_END) |
| continue; |
| |
| if (!chip->config) |
| chip->config = &s3c24xx_gpiocfg_default; |
| if (!chip->pm) |
| chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); |
| if ((base != NULL) && (chip->base == NULL)) |
| chip->base = base + ((i) * 0x10); |
| |
| if (!gc->direction_input) |
| gc->direction_input = samsung_gpiolib_2bit_input; |
| if (!gc->direction_output) |
| gc->direction_output = samsung_gpiolib_2bit_output; |
| |
| samsung_gpiolib_add(chip); |
| } |
| } |
| |
| static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip, |
| int nr_chips, void __iomem *base, |
| unsigned int offset) |
| { |
| int i; |
| |
| for (i = 0 ; i < nr_chips; i++, chip++) { |
| chip->chip.direction_input = samsung_gpiolib_2bit_input; |
| chip->chip.direction_output = samsung_gpiolib_2bit_output; |
| |
| if (!chip->config) |
| chip->config = &samsung_gpio_cfgs[7]; |
| if (!chip->pm) |
| chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); |
| if ((base != NULL) && (chip->base == NULL)) |
| chip->base = base + ((i) * offset); |
| |
| samsung_gpiolib_add(chip); |
| } |
| } |
| |
| /* |
| * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. |
| * @chip: The gpio chip that is being configured. |
| * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. |
| * |
| * This helper deal with the GPIO cases where the control register has 4 bits |
| * of control per GPIO, generally in the form of: |
| * 0000 = Input |
| * 0001 = Output |
| * others = Special functions (dependent on bank) |
| * |
| * Note, since the code to deal with the case where there are two control |
| * registers instead of one, we do not have a separate set of function |
| * (samsung_gpiolib_add_4bit2_chips)for each case. |
| */ |
| |
| static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip, |
| int nr_chips, void __iomem *base) |
| { |
| int i; |
| |
| for (i = 0 ; i < nr_chips; i++, chip++) { |
| chip->chip.direction_input = samsung_gpiolib_4bit_input; |
| chip->chip.direction_output = samsung_gpiolib_4bit_output; |
| |
| if (!chip->config) |
| chip->config = &samsung_gpio_cfgs[2]; |
| if (!chip->pm) |
| chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); |
| if ((base != NULL) && (chip->base == NULL)) |
| chip->base = base + ((i) * 0x20); |
| |
| samsung_gpiolib_add(chip); |
| } |
| } |
| |
| static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip, |
| int nr_chips) |
| { |
| for (; nr_chips > 0; nr_chips--, chip++) { |
| chip->chip.direction_input = samsung_gpiolib_4bit2_input; |
| chip->chip.direction_output = samsung_gpiolib_4bit2_output; |
| |
| if (!chip->config) |
| chip->config = &samsung_gpio_cfgs[2]; |
| if (!chip->pm) |
| chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); |
| |
| samsung_gpiolib_add(chip); |
| } |
| } |
| |
| static void __init s5p64x0_gpiolib_add_rbank(struct samsung_gpio_chip *chip, |
| int nr_chips) |
| { |
| for (; nr_chips > 0; nr_chips--, chip++) { |
| chip->chip.direction_input = s5p64x0_gpiolib_rbank_input; |
| chip->chip.direction_output = s5p64x0_gpiolib_rbank_output; |
| |
| if (!chip->pm) |
| chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); |
| |
| samsung_gpiolib_add(chip); |
| } |
| } |
| |
| int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct samsung_gpio_chip *samsung_chip = container_of(chip, struct samsung_gpio_chip, chip); |
| |
| return samsung_chip->irq_base + offset; |
| } |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset) |
| { |
| if (offset < 4) |
| return IRQ_EINT0 + offset; |
| |
| if (offset < 8) |
| return IRQ_EINT4 + offset - 4; |
| |
| return -EINVAL; |
| } |
| #endif |
| |
| #ifdef CONFIG_PLAT_S3C64XX |
| static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin) |
| { |
| return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; |
| } |
| |
| static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin) |
| { |
| return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; |
| } |
| #endif |
| |
| struct samsung_gpio_chip s3c24xx_gpios[] = { |
| #ifdef CONFIG_PLAT_S3C24XX |
| { |
| .config = &s3c24xx_gpiocfg_banka, |
| .chip = { |
| .base = S3C2410_GPA(0), |
| .owner = THIS_MODULE, |
| .label = "GPIOA", |
| .ngpio = 24, |
| .direction_input = s3c24xx_gpiolib_banka_input, |
| .direction_output = s3c24xx_gpiolib_banka_output, |
| }, |
| }, { |
| .chip = { |
| .base = S3C2410_GPB(0), |
| .owner = THIS_MODULE, |
| .label = "GPIOB", |
| .ngpio = 16, |
| }, |
| }, { |
| .chip = { |
| .base = S3C2410_GPC(0), |
| .owner = THIS_MODULE, |
| .label = "GPIOC", |
| .ngpio = 16, |
| }, |
| }, { |
| .chip = { |
| .base = S3C2410_GPD(0), |
| .owner = THIS_MODULE, |
| .label = "GPIOD", |
| .ngpio = 16, |
| }, |
| }, { |
| .chip = { |
| .base = S3C2410_GPE(0), |
| .label = "GPIOE", |
| .owner = THIS_MODULE, |
| .ngpio = 16, |
| }, |
| }, { |
| .chip = { |
| .base = S3C2410_GPF(0), |
| .owner = THIS_MODULE, |
| .label = "GPIOF", |
| .ngpio = 8, |
| .to_irq = s3c24xx_gpiolib_fbank_to_irq, |
| }, |
| }, { |
| .irq_base = IRQ_EINT8, |
| .chip = { |
| .base = S3C2410_GPG(0), |
| .owner = THIS_MODULE, |
| .label = "GPIOG", |
| .ngpio = 16, |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, { |
| .chip = { |
| .base = S3C2410_GPH(0), |
| .owner = THIS_MODULE, |
| .label = "GPIOH", |
| .ngpio = 11, |
| }, |
| }, |
| /* GPIOS for the S3C2443 and later devices. */ |
| { |
| .base = S3C2440_GPJCON, |
| .chip = { |
| .base = S3C2410_GPJ(0), |
| .owner = THIS_MODULE, |
| .label = "GPIOJ", |
| .ngpio = 16, |
| }, |
| }, { |
| .base = S3C2443_GPKCON, |
| .chip = { |
| .base = S3C2410_GPK(0), |
| .owner = THIS_MODULE, |
| .label = "GPIOK", |
| .ngpio = 16, |
| }, |
| }, { |
| .base = S3C2443_GPLCON, |
| .chip = { |
| .base = S3C2410_GPL(0), |
| .owner = THIS_MODULE, |
| .label = "GPIOL", |
| .ngpio = 15, |
| }, |
| }, { |
| .base = S3C2443_GPMCON, |
| .chip = { |
| .base = S3C2410_GPM(0), |
| .owner = THIS_MODULE, |
| .label = "GPIOM", |
| .ngpio = 2, |
| }, |
| }, |
| #endif |
| }; |
| |
| /* |
| * GPIO bank summary: |
| * |
| * Bank GPIOs Style SlpCon ExtInt Group |
| * A 8 4Bit Yes 1 |
| * B 7 4Bit Yes 1 |
| * C 8 4Bit Yes 2 |
| * D 5 4Bit Yes 3 |
| * E 5 4Bit Yes None |
| * F 16 2Bit Yes 4 [1] |
| * G 7 4Bit Yes 5 |
| * H 10 4Bit[2] Yes 6 |
| * I 16 2Bit Yes None |
| * J 12 2Bit Yes None |
| * K 16 4Bit[2] No None |
| * L 15 4Bit[2] No None |
| * M 6 4Bit No IRQ_EINT |
| * N 16 2Bit No IRQ_EINT |
| * O 16 2Bit Yes 7 |
| * P 15 2Bit Yes 8 |
| * Q 9 2Bit Yes 9 |
| * |
| * [1] BANKF pins 14,15 do not form part of the external interrupt sources |
| * [2] BANK has two control registers, GPxCON0 and GPxCON1 |
| */ |
| |
| static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = { |
| #ifdef CONFIG_PLAT_S3C64XX |
| { |
| .chip = { |
| .base = S3C64XX_GPA(0), |
| .ngpio = S3C64XX_GPIO_A_NR, |
| .label = "GPA", |
| }, |
| }, { |
| .chip = { |
| .base = S3C64XX_GPB(0), |
| .ngpio = S3C64XX_GPIO_B_NR, |
| .label = "GPB", |
| }, |
| }, { |
| .chip = { |
| .base = S3C64XX_GPC(0), |
| .ngpio = S3C64XX_GPIO_C_NR, |
| .label = "GPC", |
| }, |
| }, { |
| .chip = { |
| .base = S3C64XX_GPD(0), |
| .ngpio = S3C64XX_GPIO_D_NR, |
| .label = "GPD", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[0], |
| .chip = { |
| .base = S3C64XX_GPE(0), |
| .ngpio = S3C64XX_GPIO_E_NR, |
| .label = "GPE", |
| }, |
| }, { |
| .base = S3C64XX_GPG_BASE, |
| .chip = { |
| .base = S3C64XX_GPG(0), |
| .ngpio = S3C64XX_GPIO_G_NR, |
| .label = "GPG", |
| }, |
| }, { |
| .base = S3C64XX_GPM_BASE, |
| .config = &samsung_gpio_cfgs[1], |
| .chip = { |
| .base = S3C64XX_GPM(0), |
| .ngpio = S3C64XX_GPIO_M_NR, |
| .label = "GPM", |
| .to_irq = s3c64xx_gpiolib_mbank_to_irq, |
| }, |
| }, |
| #endif |
| }; |
| |
| static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = { |
| #ifdef CONFIG_PLAT_S3C64XX |
| { |
| .base = S3C64XX_GPH_BASE + 0x4, |
| .chip = { |
| .base = S3C64XX_GPH(0), |
| .ngpio = S3C64XX_GPIO_H_NR, |
| .label = "GPH", |
| }, |
| }, { |
| .base = S3C64XX_GPK_BASE + 0x4, |
| .config = &samsung_gpio_cfgs[0], |
| .chip = { |
| .base = S3C64XX_GPK(0), |
| .ngpio = S3C64XX_GPIO_K_NR, |
| .label = "GPK", |
| }, |
| }, { |
| .base = S3C64XX_GPL_BASE + 0x4, |
| .config = &samsung_gpio_cfgs[1], |
| .chip = { |
| .base = S3C64XX_GPL(0), |
| .ngpio = S3C64XX_GPIO_L_NR, |
| .label = "GPL", |
| .to_irq = s3c64xx_gpiolib_lbank_to_irq, |
| }, |
| }, |
| #endif |
| }; |
| |
| static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = { |
| #ifdef CONFIG_PLAT_S3C64XX |
| { |
| .base = S3C64XX_GPF_BASE, |
| .config = &samsung_gpio_cfgs[6], |
| .chip = { |
| .base = S3C64XX_GPF(0), |
| .ngpio = S3C64XX_GPIO_F_NR, |
| .label = "GPF", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[7], |
| .chip = { |
| .base = S3C64XX_GPI(0), |
| .ngpio = S3C64XX_GPIO_I_NR, |
| .label = "GPI", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[7], |
| .chip = { |
| .base = S3C64XX_GPJ(0), |
| .ngpio = S3C64XX_GPIO_J_NR, |
| .label = "GPJ", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[6], |
| .chip = { |
| .base = S3C64XX_GPO(0), |
| .ngpio = S3C64XX_GPIO_O_NR, |
| .label = "GPO", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[6], |
| .chip = { |
| .base = S3C64XX_GPP(0), |
| .ngpio = S3C64XX_GPIO_P_NR, |
| .label = "GPP", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[6], |
| .chip = { |
| .base = S3C64XX_GPQ(0), |
| .ngpio = S3C64XX_GPIO_Q_NR, |
| .label = "GPQ", |
| }, |
| }, { |
| .base = S3C64XX_GPN_BASE, |
| .irq_base = IRQ_EINT(0), |
| .config = &samsung_gpio_cfgs[5], |
| .chip = { |
| .base = S3C64XX_GPN(0), |
| .ngpio = S3C64XX_GPIO_N_NR, |
| .label = "GPN", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, |
| #endif |
| }; |
| |
| /* |
| * S5P6440 GPIO bank summary: |
| * |
| * Bank GPIOs Style SlpCon ExtInt Group |
| * A 6 4Bit Yes 1 |
| * B 7 4Bit Yes 1 |
| * C 8 4Bit Yes 2 |
| * F 2 2Bit Yes 4 [1] |
| * G 7 4Bit Yes 5 |
| * H 10 4Bit[2] Yes 6 |
| * I 16 2Bit Yes None |
| * J 12 2Bit Yes None |
| * N 16 2Bit No IRQ_EINT |
| * P 8 2Bit Yes 8 |
| * R 15 4Bit[2] Yes 8 |
| */ |
| |
| static struct samsung_gpio_chip s5p6440_gpios_4bit[] = { |
| #ifdef CONFIG_CPU_S5P6440 |
| { |
| .chip = { |
| .base = S5P6440_GPA(0), |
| .ngpio = S5P6440_GPIO_A_NR, |
| .label = "GPA", |
| }, |
| }, { |
| .chip = { |
| .base = S5P6440_GPB(0), |
| .ngpio = S5P6440_GPIO_B_NR, |
| .label = "GPB", |
| }, |
| }, { |
| .chip = { |
| .base = S5P6440_GPC(0), |
| .ngpio = S5P6440_GPIO_C_NR, |
| .label = "GPC", |
| }, |
| }, { |
| .base = S5P64X0_GPG_BASE, |
| .chip = { |
| .base = S5P6440_GPG(0), |
| .ngpio = S5P6440_GPIO_G_NR, |
| .label = "GPG", |
| }, |
| }, |
| #endif |
| }; |
| |
| static struct samsung_gpio_chip s5p6440_gpios_4bit2[] = { |
| #ifdef CONFIG_CPU_S5P6440 |
| { |
| .base = S5P64X0_GPH_BASE + 0x4, |
| .chip = { |
| .base = S5P6440_GPH(0), |
| .ngpio = S5P6440_GPIO_H_NR, |
| .label = "GPH", |
| }, |
| }, |
| #endif |
| }; |
| |
| static struct samsung_gpio_chip s5p6440_gpios_rbank[] = { |
| #ifdef CONFIG_CPU_S5P6440 |
| { |
| .base = S5P64X0_GPR_BASE + 0x4, |
| .config = &s5p64x0_gpio_cfg_rbank, |
| .chip = { |
| .base = S5P6440_GPR(0), |
| .ngpio = S5P6440_GPIO_R_NR, |
| .label = "GPR", |
| }, |
| }, |
| #endif |
| }; |
| |
| static struct samsung_gpio_chip s5p6440_gpios_2bit[] = { |
| #ifdef CONFIG_CPU_S5P6440 |
| { |
| .base = S5P64X0_GPF_BASE, |
| .config = &samsung_gpio_cfgs[6], |
| .chip = { |
| .base = S5P6440_GPF(0), |
| .ngpio = S5P6440_GPIO_F_NR, |
| .label = "GPF", |
| }, |
| }, { |
| .base = S5P64X0_GPI_BASE, |
| .config = &samsung_gpio_cfgs[4], |
| .chip = { |
| .base = S5P6440_GPI(0), |
| .ngpio = S5P6440_GPIO_I_NR, |
| .label = "GPI", |
| }, |
| }, { |
| .base = S5P64X0_GPJ_BASE, |
| .config = &samsung_gpio_cfgs[4], |
| .chip = { |
| .base = S5P6440_GPJ(0), |
| .ngpio = S5P6440_GPIO_J_NR, |
| .label = "GPJ", |
| }, |
| }, { |
| .base = S5P64X0_GPN_BASE, |
| .config = &samsung_gpio_cfgs[5], |
| .chip = { |
| .base = S5P6440_GPN(0), |
| .ngpio = S5P6440_GPIO_N_NR, |
| .label = "GPN", |
| }, |
| }, { |
| .base = S5P64X0_GPP_BASE, |
| .config = &samsung_gpio_cfgs[6], |
| .chip = { |
| .base = S5P6440_GPP(0), |
| .ngpio = S5P6440_GPIO_P_NR, |
| .label = "GPP", |
| }, |
| }, |
| #endif |
| }; |
| |
| /* |
| * S5P6450 GPIO bank summary: |
| * |
| * Bank GPIOs Style SlpCon ExtInt Group |
| * A 6 4Bit Yes 1 |
| * B 7 4Bit Yes 1 |
| * C 8 4Bit Yes 2 |
| * D 8 4Bit Yes None |
| * F 2 2Bit Yes None |
| * G 14 4Bit[2] Yes 5 |
| * H 10 4Bit[2] Yes 6 |
| * I 16 2Bit Yes None |
| * J 12 2Bit Yes None |
| * K 5 4Bit Yes None |
| * N 16 2Bit No IRQ_EINT |
| * P 11 2Bit Yes 8 |
| * Q 14 2Bit Yes None |
| * R 15 4Bit[2] Yes None |
| * S 8 2Bit Yes None |
| * |
| * [1] BANKF pins 14,15 do not form part of the external interrupt sources |
| * [2] BANK has two control registers, GPxCON0 and GPxCON1 |
| */ |
| |
| static struct samsung_gpio_chip s5p6450_gpios_4bit[] = { |
| #ifdef CONFIG_CPU_S5P6450 |
| { |
| .chip = { |
| .base = S5P6450_GPA(0), |
| .ngpio = S5P6450_GPIO_A_NR, |
| .label = "GPA", |
| }, |
| }, { |
| .chip = { |
| .base = S5P6450_GPB(0), |
| .ngpio = S5P6450_GPIO_B_NR, |
| .label = "GPB", |
| }, |
| }, { |
| .chip = { |
| .base = S5P6450_GPC(0), |
| .ngpio = S5P6450_GPIO_C_NR, |
| .label = "GPC", |
| }, |
| }, { |
| .chip = { |
| .base = S5P6450_GPD(0), |
| .ngpio = S5P6450_GPIO_D_NR, |
| .label = "GPD", |
| }, |
| }, { |
| .base = S5P6450_GPK_BASE, |
| .chip = { |
| .base = S5P6450_GPK(0), |
| .ngpio = S5P6450_GPIO_K_NR, |
| .label = "GPK", |
| }, |
| }, |
| #endif |
| }; |
| |
| static struct samsung_gpio_chip s5p6450_gpios_4bit2[] = { |
| #ifdef CONFIG_CPU_S5P6450 |
| { |
| .base = S5P64X0_GPG_BASE + 0x4, |
| .chip = { |
| .base = S5P6450_GPG(0), |
| .ngpio = S5P6450_GPIO_G_NR, |
| .label = "GPG", |
| }, |
| }, { |
| .base = S5P64X0_GPH_BASE + 0x4, |
| .chip = { |
| .base = S5P6450_GPH(0), |
| .ngpio = S5P6450_GPIO_H_NR, |
| .label = "GPH", |
| }, |
| }, |
| #endif |
| }; |
| |
| static struct samsung_gpio_chip s5p6450_gpios_rbank[] = { |
| #ifdef CONFIG_CPU_S5P6450 |
| { |
| .base = S5P64X0_GPR_BASE + 0x4, |
| .config = &s5p64x0_gpio_cfg_rbank, |
| .chip = { |
| .base = S5P6450_GPR(0), |
| .ngpio = S5P6450_GPIO_R_NR, |
| .label = "GPR", |
| }, |
| }, |
| #endif |
| }; |
| |
| static struct samsung_gpio_chip s5p6450_gpios_2bit[] = { |
| #ifdef CONFIG_CPU_S5P6450 |
| { |
| .base = S5P64X0_GPF_BASE, |
| .config = &samsung_gpio_cfgs[6], |
| .chip = { |
| .base = S5P6450_GPF(0), |
| .ngpio = S5P6450_GPIO_F_NR, |
| .label = "GPF", |
| }, |
| }, { |
| .base = S5P64X0_GPI_BASE, |
| .config = &samsung_gpio_cfgs[4], |
| .chip = { |
| .base = S5P6450_GPI(0), |
| .ngpio = S5P6450_GPIO_I_NR, |
| .label = "GPI", |
| }, |
| }, { |
| .base = S5P64X0_GPJ_BASE, |
| .config = &samsung_gpio_cfgs[4], |
| .chip = { |
| .base = S5P6450_GPJ(0), |
| .ngpio = S5P6450_GPIO_J_NR, |
| .label = "GPJ", |
| }, |
| }, { |
| .base = S5P64X0_GPN_BASE, |
| .config = &samsung_gpio_cfgs[5], |
| .chip = { |
| .base = S5P6450_GPN(0), |
| .ngpio = S5P6450_GPIO_N_NR, |
| .label = "GPN", |
| }, |
| }, { |
| .base = S5P64X0_GPP_BASE, |
| .config = &samsung_gpio_cfgs[6], |
| .chip = { |
| .base = S5P6450_GPP(0), |
| .ngpio = S5P6450_GPIO_P_NR, |
| .label = "GPP", |
| }, |
| }, { |
| .base = S5P6450_GPQ_BASE, |
| .config = &samsung_gpio_cfgs[5], |
| .chip = { |
| .base = S5P6450_GPQ(0), |
| .ngpio = S5P6450_GPIO_Q_NR, |
| .label = "GPQ", |
| }, |
| }, { |
| .base = S5P6450_GPS_BASE, |
| .config = &samsung_gpio_cfgs[6], |
| .chip = { |
| .base = S5P6450_GPS(0), |
| .ngpio = S5P6450_GPIO_S_NR, |
| .label = "GPS", |
| }, |
| }, |
| #endif |
| }; |
| |
| /* |
| * S5PC100 GPIO bank summary: |
| * |
| * Bank GPIOs Style INT Type |
| * A0 8 4Bit GPIO_INT0 |
| * A1 5 4Bit GPIO_INT1 |
| * B 8 4Bit GPIO_INT2 |
| * C 5 4Bit GPIO_INT3 |
| * D 7 4Bit GPIO_INT4 |
| * E0 8 4Bit GPIO_INT5 |
| * E1 6 4Bit GPIO_INT6 |
| * F0 8 4Bit GPIO_INT7 |
| * F1 8 4Bit GPIO_INT8 |
| * F2 8 4Bit GPIO_INT9 |
| * F3 4 4Bit GPIO_INT10 |
| * G0 8 4Bit GPIO_INT11 |
| * G1 3 4Bit GPIO_INT12 |
| * G2 7 4Bit GPIO_INT13 |
| * G3 7 4Bit GPIO_INT14 |
| * H0 8 4Bit WKUP_INT |
| * H1 8 4Bit WKUP_INT |
| * H2 8 4Bit WKUP_INT |
| * H3 8 4Bit WKUP_INT |
| * I 8 4Bit GPIO_INT15 |
| * J0 8 4Bit GPIO_INT16 |
| * J1 5 4Bit GPIO_INT17 |
| * J2 8 4Bit GPIO_INT18 |
| * J3 8 4Bit GPIO_INT19 |
| * J4 4 4Bit GPIO_INT20 |
| * K0 8 4Bit None |
| * K1 6 4Bit None |
| * K2 8 4Bit None |
| * K3 8 4Bit None |
| * L0 8 4Bit None |
| * L1 8 4Bit None |
| * L2 8 4Bit None |
| * L3 8 4Bit None |
| */ |
| |
| static struct samsung_gpio_chip s5pc100_gpios_4bit[] = { |
| #ifdef CONFIG_CPU_S5PC100 |
| { |
| .chip = { |
| .base = S5PC100_GPA0(0), |
| .ngpio = S5PC100_GPIO_A0_NR, |
| .label = "GPA0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPA1(0), |
| .ngpio = S5PC100_GPIO_A1_NR, |
| .label = "GPA1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPB(0), |
| .ngpio = S5PC100_GPIO_B_NR, |
| .label = "GPB", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPC(0), |
| .ngpio = S5PC100_GPIO_C_NR, |
| .label = "GPC", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPD(0), |
| .ngpio = S5PC100_GPIO_D_NR, |
| .label = "GPD", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPE0(0), |
| .ngpio = S5PC100_GPIO_E0_NR, |
| .label = "GPE0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPE1(0), |
| .ngpio = S5PC100_GPIO_E1_NR, |
| .label = "GPE1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPF0(0), |
| .ngpio = S5PC100_GPIO_F0_NR, |
| .label = "GPF0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPF1(0), |
| .ngpio = S5PC100_GPIO_F1_NR, |
| .label = "GPF1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPF2(0), |
| .ngpio = S5PC100_GPIO_F2_NR, |
| .label = "GPF2", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPF3(0), |
| .ngpio = S5PC100_GPIO_F3_NR, |
| .label = "GPF3", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPG0(0), |
| .ngpio = S5PC100_GPIO_G0_NR, |
| .label = "GPG0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPG1(0), |
| .ngpio = S5PC100_GPIO_G1_NR, |
| .label = "GPG1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPG2(0), |
| .ngpio = S5PC100_GPIO_G2_NR, |
| .label = "GPG2", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPG3(0), |
| .ngpio = S5PC100_GPIO_G3_NR, |
| .label = "GPG3", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPI(0), |
| .ngpio = S5PC100_GPIO_I_NR, |
| .label = "GPI", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPJ0(0), |
| .ngpio = S5PC100_GPIO_J0_NR, |
| .label = "GPJ0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPJ1(0), |
| .ngpio = S5PC100_GPIO_J1_NR, |
| .label = "GPJ1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPJ2(0), |
| .ngpio = S5PC100_GPIO_J2_NR, |
| .label = "GPJ2", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPJ3(0), |
| .ngpio = S5PC100_GPIO_J3_NR, |
| .label = "GPJ3", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPJ4(0), |
| .ngpio = S5PC100_GPIO_J4_NR, |
| .label = "GPJ4", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPK0(0), |
| .ngpio = S5PC100_GPIO_K0_NR, |
| .label = "GPK0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPK1(0), |
| .ngpio = S5PC100_GPIO_K1_NR, |
| .label = "GPK1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPK2(0), |
| .ngpio = S5PC100_GPIO_K2_NR, |
| .label = "GPK2", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPK3(0), |
| .ngpio = S5PC100_GPIO_K3_NR, |
| .label = "GPK3", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPL0(0), |
| .ngpio = S5PC100_GPIO_L0_NR, |
| .label = "GPL0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPL1(0), |
| .ngpio = S5PC100_GPIO_L1_NR, |
| .label = "GPL1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPL2(0), |
| .ngpio = S5PC100_GPIO_L2_NR, |
| .label = "GPL2", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPL3(0), |
| .ngpio = S5PC100_GPIO_L3_NR, |
| .label = "GPL3", |
| }, |
| }, { |
| .chip = { |
| .base = S5PC100_GPL4(0), |
| .ngpio = S5PC100_GPIO_L4_NR, |
| .label = "GPL4", |
| }, |
| }, { |
| .base = (S5P_VA_GPIO + 0xC00), |
| .irq_base = IRQ_EINT(0), |
| .chip = { |
| .base = S5PC100_GPH0(0), |
| .ngpio = S5PC100_GPIO_H0_NR, |
| .label = "GPH0", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, { |
| .base = (S5P_VA_GPIO + 0xC20), |
| .irq_base = IRQ_EINT(8), |
| .chip = { |
| .base = S5PC100_GPH1(0), |
| .ngpio = S5PC100_GPIO_H1_NR, |
| .label = "GPH1", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, { |
| .base = (S5P_VA_GPIO + 0xC40), |
| .irq_base = IRQ_EINT(16), |
| .chip = { |
| .base = S5PC100_GPH2(0), |
| .ngpio = S5PC100_GPIO_H2_NR, |
| .label = "GPH2", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, { |
| .base = (S5P_VA_GPIO + 0xC60), |
| .irq_base = IRQ_EINT(24), |
| .chip = { |
| .base = S5PC100_GPH3(0), |
| .ngpio = S5PC100_GPIO_H3_NR, |
| .label = "GPH3", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, |
| #endif |
| }; |
| |
| /* |
| * Followings are the gpio banks in S5PV210/S5PC110 |
| * |
| * The 'config' member when left to NULL, is initialized to the default |
| * structure samsung_gpio_cfgs[3] in the init function below. |
| * |
| * The 'base' member is also initialized in the init function below. |
| * Note: The initialization of 'base' member of samsung_gpio_chip structure |
| * uses the above macro and depends on the banks being listed in order here. |
| */ |
| |
| static struct samsung_gpio_chip s5pv210_gpios_4bit[] = { |
| #ifdef CONFIG_CPU_S5PV210 |
| { |
| .chip = { |
| .base = S5PV210_GPA0(0), |
| .ngpio = S5PV210_GPIO_A0_NR, |
| .label = "GPA0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPA1(0), |
| .ngpio = S5PV210_GPIO_A1_NR, |
| .label = "GPA1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPB(0), |
| .ngpio = S5PV210_GPIO_B_NR, |
| .label = "GPB", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPC0(0), |
| .ngpio = S5PV210_GPIO_C0_NR, |
| .label = "GPC0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPC1(0), |
| .ngpio = S5PV210_GPIO_C1_NR, |
| .label = "GPC1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPD0(0), |
| .ngpio = S5PV210_GPIO_D0_NR, |
| .label = "GPD0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPD1(0), |
| .ngpio = S5PV210_GPIO_D1_NR, |
| .label = "GPD1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPE0(0), |
| .ngpio = S5PV210_GPIO_E0_NR, |
| .label = "GPE0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPE1(0), |
| .ngpio = S5PV210_GPIO_E1_NR, |
| .label = "GPE1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPF0(0), |
| .ngpio = S5PV210_GPIO_F0_NR, |
| .label = "GPF0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPF1(0), |
| .ngpio = S5PV210_GPIO_F1_NR, |
| .label = "GPF1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPF2(0), |
| .ngpio = S5PV210_GPIO_F2_NR, |
| .label = "GPF2", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPF3(0), |
| .ngpio = S5PV210_GPIO_F3_NR, |
| .label = "GPF3", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPG0(0), |
| .ngpio = S5PV210_GPIO_G0_NR, |
| .label = "GPG0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPG1(0), |
| .ngpio = S5PV210_GPIO_G1_NR, |
| .label = "GPG1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPG2(0), |
| .ngpio = S5PV210_GPIO_G2_NR, |
| .label = "GPG2", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPG3(0), |
| .ngpio = S5PV210_GPIO_G3_NR, |
| .label = "GPG3", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPI(0), |
| .ngpio = S5PV210_GPIO_I_NR, |
| .label = "GPI", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPJ0(0), |
| .ngpio = S5PV210_GPIO_J0_NR, |
| .label = "GPJ0", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPJ1(0), |
| .ngpio = S5PV210_GPIO_J1_NR, |
| .label = "GPJ1", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPJ2(0), |
| .ngpio = S5PV210_GPIO_J2_NR, |
| .label = "GPJ2", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPJ3(0), |
| .ngpio = S5PV210_GPIO_J3_NR, |
| .label = "GPJ3", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_GPJ4(0), |
| .ngpio = S5PV210_GPIO_J4_NR, |
| .label = "GPJ4", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_MP01(0), |
| .ngpio = S5PV210_GPIO_MP01_NR, |
| .label = "MP01", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_MP02(0), |
| .ngpio = S5PV210_GPIO_MP02_NR, |
| .label = "MP02", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_MP03(0), |
| .ngpio = S5PV210_GPIO_MP03_NR, |
| .label = "MP03", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_MP04(0), |
| .ngpio = S5PV210_GPIO_MP04_NR, |
| .label = "MP04", |
| }, |
| }, { |
| .chip = { |
| .base = S5PV210_MP05(0), |
| .ngpio = S5PV210_GPIO_MP05_NR, |
| .label = "MP05", |
| }, |
| }, { |
| .base = (S5P_VA_GPIO + 0xC00), |
| .irq_base = IRQ_EINT(0), |
| .chip = { |
| .base = S5PV210_GPH0(0), |
| .ngpio = S5PV210_GPIO_H0_NR, |
| .label = "GPH0", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, { |
| .base = (S5P_VA_GPIO + 0xC20), |
| .irq_base = IRQ_EINT(8), |
| .chip = { |
| .base = S5PV210_GPH1(0), |
| .ngpio = S5PV210_GPIO_H1_NR, |
| .label = "GPH1", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, { |
| .base = (S5P_VA_GPIO + 0xC40), |
| .irq_base = IRQ_EINT(16), |
| .chip = { |
| .base = S5PV210_GPH2(0), |
| .ngpio = S5PV210_GPIO_H2_NR, |
| .label = "GPH2", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, { |
| .base = (S5P_VA_GPIO + 0xC60), |
| .irq_base = IRQ_EINT(24), |
| .chip = { |
| .base = S5PV210_GPH3(0), |
| .ngpio = S5PV210_GPIO_H3_NR, |
| .label = "GPH3", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, |
| #endif |
| }; |
| |
| /* |
| * Followings are the gpio banks in EXYNOS4210 |
| * |
| * The 'config' member when left to NULL, is initialized to the default |
| * structure samsung_gpio_cfgs[3] in the init function below. |
| * |
| * The 'base' member is also initialized in the init function below. |
| * Note: The initialization of 'base' member of samsung_gpio_chip structure |
| * uses the above macro and depends on the banks being listed in order here. |
| */ |
| |
| static struct samsung_gpio_chip exynos4_gpios_1[] = { |
| #ifdef CONFIG_ARCH_EXYNOS4 |
| { |
| .chip = { |
| .base = EXYNOS4_GPA0(0), |
| .ngpio = EXYNOS4_GPIO_A0_NR, |
| .label = "GPA0", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPA1(0), |
| .ngpio = EXYNOS4_GPIO_A1_NR, |
| .label = "GPA1", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPB(0), |
| .ngpio = EXYNOS4_GPIO_B_NR, |
| .label = "GPB", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPC0(0), |
| .ngpio = EXYNOS4_GPIO_C0_NR, |
| .label = "GPC0", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPC1(0), |
| .ngpio = EXYNOS4_GPIO_C1_NR, |
| .label = "GPC1", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPD0(0), |
| .ngpio = EXYNOS4_GPIO_D0_NR, |
| .label = "GPD0", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPD1(0), |
| .ngpio = EXYNOS4_GPIO_D1_NR, |
| .label = "GPD1", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPE0(0), |
| .ngpio = EXYNOS4_GPIO_E0_NR, |
| .label = "GPE0", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPE1(0), |
| .ngpio = EXYNOS4_GPIO_E1_NR, |
| .label = "GPE1", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPE2(0), |
| .ngpio = EXYNOS4_GPIO_E2_NR, |
| .label = "GPE2", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPE3(0), |
| .ngpio = EXYNOS4_GPIO_E3_NR, |
| .label = "GPE3", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPE4(0), |
| .ngpio = EXYNOS4_GPIO_E4_NR, |
| .label = "GPE4", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPF0(0), |
| .ngpio = EXYNOS4_GPIO_F0_NR, |
| .label = "GPF0", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPF1(0), |
| .ngpio = EXYNOS4_GPIO_F1_NR, |
| .label = "GPF1", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPF2(0), |
| .ngpio = EXYNOS4_GPIO_F2_NR, |
| .label = "GPF2", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPF3(0), |
| .ngpio = EXYNOS4_GPIO_F3_NR, |
| .label = "GPF3", |
| }, |
| }, |
| #endif |
| }; |
| |
| static struct samsung_gpio_chip exynos4_gpios_2[] = { |
| #ifdef CONFIG_ARCH_EXYNOS4 |
| { |
| .chip = { |
| .base = EXYNOS4_GPJ0(0), |
| .ngpio = EXYNOS4_GPIO_J0_NR, |
| .label = "GPJ0", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPJ1(0), |
| .ngpio = EXYNOS4_GPIO_J1_NR, |
| .label = "GPJ1", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPK0(0), |
| .ngpio = EXYNOS4_GPIO_K0_NR, |
| .label = "GPK0", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPK1(0), |
| .ngpio = EXYNOS4_GPIO_K1_NR, |
| .label = "GPK1", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPK2(0), |
| .ngpio = EXYNOS4_GPIO_K2_NR, |
| .label = "GPK2", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPK3(0), |
| .ngpio = EXYNOS4_GPIO_K3_NR, |
| .label = "GPK3", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPL0(0), |
| .ngpio = EXYNOS4_GPIO_L0_NR, |
| .label = "GPL0", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPL1(0), |
| .ngpio = EXYNOS4_GPIO_L1_NR, |
| .label = "GPL1", |
| }, |
| }, { |
| .chip = { |
| .base = EXYNOS4_GPL2(0), |
| .ngpio = EXYNOS4_GPIO_L2_NR, |
| .label = "GPL2", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[8], |
| .chip = { |
| .base = EXYNOS4_GPY0(0), |
| .ngpio = EXYNOS4_GPIO_Y0_NR, |
| .label = "GPY0", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[8], |
| .chip = { |
| .base = EXYNOS4_GPY1(0), |
| .ngpio = EXYNOS4_GPIO_Y1_NR, |
| .label = "GPY1", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[8], |
| .chip = { |
| .base = EXYNOS4_GPY2(0), |
| .ngpio = EXYNOS4_GPIO_Y2_NR, |
| .label = "GPY2", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[8], |
| .chip = { |
| .base = EXYNOS4_GPY3(0), |
| .ngpio = EXYNOS4_GPIO_Y3_NR, |
| .label = "GPY3", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[8], |
| .chip = { |
| .base = EXYNOS4_GPY4(0), |
| .ngpio = EXYNOS4_GPIO_Y4_NR, |
| .label = "GPY4", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[8], |
| .chip = { |
| .base = EXYNOS4_GPY5(0), |
| .ngpio = EXYNOS4_GPIO_Y5_NR, |
| .label = "GPY5", |
| }, |
| }, { |
| .config = &samsung_gpio_cfgs[8], |
| .chip = { |
| .base = EXYNOS4_GPY6(0), |
| .ngpio = EXYNOS4_GPIO_Y6_NR, |
| .label = "GPY6", |
| }, |
| }, { |
| .base = (S5P_VA_GPIO2 + 0xC00), |
| .config = &samsung_gpio_cfgs[9], |
| .irq_base = IRQ_EINT(0), |
| .chip = { |
| .base = EXYNOS4_GPX0(0), |
| .ngpio = EXYNOS4_GPIO_X0_NR, |
| .label = "GPX0", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, { |
| .base = (S5P_VA_GPIO2 + 0xC20), |
| .config = &samsung_gpio_cfgs[9], |
| .irq_base = IRQ_EINT(8), |
| .chip = { |
| .base = EXYNOS4_GPX1(0), |
| .ngpio = EXYNOS4_GPIO_X1_NR, |
| .label = "GPX1", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, { |
| .base = (S5P_VA_GPIO2 + 0xC40), |
| .config = &samsung_gpio_cfgs[9], |
| .irq_base = IRQ_EINT(16), |
| .chip = { |
| .base = EXYNOS4_GPX2(0), |
| .ngpio = EXYNOS4_GPIO_X2_NR, |
| .label = "GPX2", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, { |
| .base = (S5P_VA_GPIO2 + 0xC60), |
| .config = &samsung_gpio_cfgs[9], |
| .irq_base = IRQ_EINT(24), |
| .chip = { |
| .base = EXYNOS4_GPX3(0), |
| .ngpio = EXYNOS4_GPIO_X3_NR, |
| .label = "GPX3", |
| .to_irq = samsung_gpiolib_to_irq, |
| }, |
| }, |
| #endif |
| }; |
| |
| static struct samsung_gpio_chip exynos4_gpios_3[] = { |
| #ifdef CONFIG_ARCH_EXYNOS4 |
| { |
| .chip = { |
| .base = EXYNOS4_GPZ(0), |
| .ngpio = EXYNOS4_GPIO_Z_NR, |
| .label = "GPZ", |
| }, |
| }, |
| #endif |
| }; |
| |
| #if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) |
| static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np, |
| const void *gpio_spec, u32 *flags) |
| { |
| const __be32 *gpio = gpio_spec; |
| const u32 n = be32_to_cpup(gpio); |
| unsigned int pin = gc->base + be32_to_cpu(gpio[0]); |
| |
| if (WARN_ON(gc->of_gpio_n_cells < 4)) |
| return -EINVAL; |
| |
| if (n > gc->ngpio) |
| return -EINVAL; |
| |
| if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1])))) |
| pr_warn("gpio_xlate: failed to set pin function\n"); |
| if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2]))) |
| pr_warn("gpio_xlate: failed to set pin pull up/down\n"); |
| if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3]))) |
| pr_warn("gpio_xlate: failed to set pin drive strength\n"); |
| |
| return n; |
| } |
| |
| static const struct of_device_id exynos4_gpio_dt_match[] __initdata = { |
| { .compatible = "samsung,exynos4-gpio", }, |
| {} |
| }; |
| |
| static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, |
| u64 base, u64 offset) |
| { |
| struct gpio_chip *gc = &chip->chip; |
| u64 address; |
| |
| if (!of_have_populated_dt()) |
| return; |
| |
| address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset; |
| gc->of_node = of_find_matching_node_by_address(NULL, |
| exynos4_gpio_dt_match, address); |
| if (!gc->of_node) { |
| pr_info("gpio: device tree node not found for gpio controller" |
| " with base address %08llx\n", address); |
| return; |
| } |
| gc->of_gpio_n_cells = 4; |
| gc->of_xlate = exynos4_gpio_xlate; |
| } |
| #elif defined(CONFIG_ARCH_EXYNOS4) |
| static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, |
| u64 base, u64 offset) |
| { |
| return; |
| } |
| #endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */ |
| |
| /* TODO: cleanup soc_is_* */ |
| static __init int samsung_gpiolib_init(void) |
| { |
| struct samsung_gpio_chip *chip; |
| int i, nr_chips; |
| int group = 0; |
| |
| samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs)); |
| |
| if (soc_is_s3c24xx()) { |
| s3c24xx_gpiolib_add_chips(s3c24xx_gpios, |
| ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO); |
| } else if (soc_is_s3c64xx()) { |
| samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit, |
| ARRAY_SIZE(s3c64xx_gpios_2bit), |
| S3C64XX_VA_GPIO + 0xE0, 0x20); |
| samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit, |
| ARRAY_SIZE(s3c64xx_gpios_4bit), |
| S3C64XX_VA_GPIO); |
| samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2, |
| ARRAY_SIZE(s3c64xx_gpios_4bit2)); |
| } else if (soc_is_s5p6440()) { |
| samsung_gpiolib_add_2bit_chips(s5p6440_gpios_2bit, |
| ARRAY_SIZE(s5p6440_gpios_2bit), NULL, 0x0); |
| samsung_gpiolib_add_4bit_chips(s5p6440_gpios_4bit, |
| ARRAY_SIZE(s5p6440_gpios_4bit), S5P_VA_GPIO); |
| samsung_gpiolib_add_4bit2_chips(s5p6440_gpios_4bit2, |
| ARRAY_SIZE(s5p6440_gpios_4bit2)); |
| s5p64x0_gpiolib_add_rbank(s5p6440_gpios_rbank, |
| ARRAY_SIZE(s5p6440_gpios_rbank)); |
| } else if (soc_is_s5p6450()) { |
| samsung_gpiolib_add_2bit_chips(s5p6450_gpios_2bit, |
| ARRAY_SIZE(s5p6450_gpios_2bit), NULL, 0x0); |
| samsung_gpiolib_add_4bit_chips(s5p6450_gpios_4bit, |
| ARRAY_SIZE(s5p6450_gpios_4bit), S5P_VA_GPIO); |
| samsung_gpiolib_add_4bit2_chips(s5p6450_gpios_4bit2, |
| ARRAY_SIZE(s5p6450_gpios_4bit2)); |
| s5p64x0_gpiolib_add_rbank(s5p6450_gpios_rbank, |
| ARRAY_SIZE(s5p6450_gpios_rbank)); |
| } else if (soc_is_s5pc100()) { |
| group = 0; |
| chip = s5pc100_gpios_4bit; |
| nr_chips = ARRAY_SIZE(s5pc100_gpios_4bit); |
| |
| for (i = 0; i < nr_chips; i++, chip++) { |
| if (!chip->config) { |
| chip->config = &samsung_gpio_cfgs[3]; |
| chip->group = group++; |
| } |
| } |
| samsung_gpiolib_add_4bit_chips(s5pc100_gpios_4bit, nr_chips, S5P_VA_GPIO); |
| #if defined(CONFIG_CPU_S5PC100) && defined(CONFIG_S5P_GPIO_INT) |
| s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); |
| #endif |
| } else if (soc_is_s5pv210()) { |
| group = 0; |
| chip = s5pv210_gpios_4bit; |
| nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit); |
| |
| for (i = 0; i < nr_chips; i++, chip++) { |
| if (!chip->config) { |
| chip->config = &samsung_gpio_cfgs[3]; |
| chip->group = group++; |
| } |
| } |
| samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO); |
| #if defined(CONFIG_CPU_S5PV210) && defined(CONFIG_S5P_GPIO_INT) |
| s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); |
| #endif |
| } else if (soc_is_exynos4210()) { |
| group = 0; |
| |
| /* gpio part1 */ |
| chip = exynos4_gpios_1; |
| nr_chips = ARRAY_SIZE(exynos4_gpios_1); |
| |
| for (i = 0; i < nr_chips; i++, chip++) { |
| if (!chip->config) { |
| chip->config = &exynos4_gpio_cfg; |
| chip->group = group++; |
| } |
| #ifdef CONFIG_CPU_EXYNOS4210 |
| exynos4_gpiolib_attach_ofnode(chip, |
| EXYNOS4_PA_GPIO1, i * 0x20); |
| #endif |
| } |
| samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1); |
| |
| /* gpio part2 */ |
| chip = exynos4_gpios_2; |
| nr_chips = ARRAY_SIZE(exynos4_gpios_2); |
| |
| for (i = 0; i < nr_chips; i++, chip++) { |
| if (!chip->config) { |
| chip->config = &exynos4_gpio_cfg; |
| chip->group = group++; |
| } |
| #ifdef CONFIG_CPU_EXYNOS4210 |
| exynos4_gpiolib_attach_ofnode(chip, |
| EXYNOS4_PA_GPIO2, i * 0x20); |
| #endif |
| } |
| samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2); |
| |
| /* gpio part3 */ |
| chip = exynos4_gpios_3; |
| nr_chips = ARRAY_SIZE(exynos4_gpios_3); |
| |
| for (i = 0; i < nr_chips; i++, chip++) { |
| if (!chip->config) { |
| chip->config = &exynos4_gpio_cfg; |
| chip->group = group++; |
| } |
| #ifdef CONFIG_CPU_EXYNOS4210 |
| exynos4_gpiolib_attach_ofnode(chip, |
| EXYNOS4_PA_GPIO3, i * 0x20); |
| #endif |
| } |
| samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3); |
| |
| #if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT) |
| s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); |
| s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); |
| #endif |
| } else { |
| WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| core_initcall(samsung_gpiolib_init); |
| |
| int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) |
| { |
| struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); |
| unsigned long flags; |
| int offset; |
| int ret; |
| |
| if (!chip) |
| return -EINVAL; |
| |
| offset = pin - chip->chip.base; |
| |
| samsung_gpio_lock(chip, flags); |
| ret = samsung_gpio_do_setcfg(chip, offset, config); |
| samsung_gpio_unlock(chip, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(s3c_gpio_cfgpin); |
| |
| int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, |
| unsigned int cfg) |
| { |
| int ret; |
| |
| for (; nr > 0; nr--, start++) { |
| ret = s3c_gpio_cfgpin(start, cfg); |
| if (ret != 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); |
| |
| int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, |
| unsigned int cfg, samsung_gpio_pull_t pull) |
| { |
| int ret; |
| |
| for (; nr > 0; nr--, start++) { |
| s3c_gpio_setpull(start, pull); |
| ret = s3c_gpio_cfgpin(start, cfg); |
| if (ret != 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); |
| |
| unsigned s3c_gpio_getcfg(unsigned int pin) |
| { |
| struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); |
| unsigned long flags; |
| unsigned ret = 0; |
| int offset; |
| |
| if (chip) { |
| offset = pin - chip->chip.base; |
| |
| samsung_gpio_lock(chip, flags); |
| ret = samsung_gpio_do_getcfg(chip, offset); |
| samsung_gpio_unlock(chip, flags); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(s3c_gpio_getcfg); |
| |
| int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull) |
| { |
| struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); |
| unsigned long flags; |
| int offset, ret; |
| |
| if (!chip) |
| return -EINVAL; |
| |
| offset = pin - chip->chip.base; |
| |
| samsung_gpio_lock(chip, flags); |
| ret = samsung_gpio_do_setpull(chip, offset, pull); |
| samsung_gpio_unlock(chip, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(s3c_gpio_setpull); |
| |
| samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin) |
| { |
| struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); |
| unsigned long flags; |
| int offset; |
| u32 pup = 0; |
| |
| if (chip) { |
| offset = pin - chip->chip.base; |
| |
| samsung_gpio_lock(chip, flags); |
| pup = samsung_gpio_do_getpull(chip, offset); |
| samsung_gpio_unlock(chip, flags); |
| } |
| |
| return (__force samsung_gpio_pull_t)pup; |
| } |
| EXPORT_SYMBOL(s3c_gpio_getpull); |
| |
| /* gpiolib wrappers until these are totally eliminated */ |
| |
| void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) |
| { |
| int ret; |
| |
| WARN_ON(to); /* should be none of these left */ |
| |
| if (!to) { |
| /* if pull is enabled, try first with up, and if that |
| * fails, try using down */ |
| |
| ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); |
| if (ret) |
| s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); |
| } else { |
| s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); |
| } |
| } |
| EXPORT_SYMBOL(s3c2410_gpio_pullup); |
| |
| void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) |
| { |
| /* do this via gpiolib until all users removed */ |
| |
| gpio_request(pin, "temporary"); |
| gpio_set_value(pin, to); |
| gpio_free(pin); |
| } |
| EXPORT_SYMBOL(s3c2410_gpio_setpin); |
| |
| unsigned int s3c2410_gpio_getpin(unsigned int pin) |
| { |
| struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); |
| unsigned long offs = pin - chip->chip.base; |
| |
| return __raw_readl(chip->base + 0x04) & (1 << offs); |
| } |
| EXPORT_SYMBOL(s3c2410_gpio_getpin); |
| |
| #ifdef CONFIG_S5P_GPIO_DRVSTR |
| s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) |
| { |
| struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); |
| unsigned int off; |
| void __iomem *reg; |
| int shift; |
| u32 drvstr; |
| |
| if (!chip) |
| return -EINVAL; |
| |
| off = pin - chip->chip.base; |
| shift = off * 2; |
| reg = chip->base + 0x0C; |
| |
| drvstr = __raw_readl(reg); |
| drvstr = drvstr >> shift; |
| drvstr &= 0x3; |
| |
| return (__force s5p_gpio_drvstr_t)drvstr; |
| } |
| EXPORT_SYMBOL(s5p_gpio_get_drvstr); |
| |
| int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr) |
| { |
| struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); |
| unsigned int off; |
| void __iomem *reg; |
| int shift; |
| u32 tmp; |
| |
| if (!chip) |
| return -EINVAL; |
| |
| off = pin - chip->chip.base; |
| shift = off * 2; |
| reg = chip->base + 0x0C; |
| |
| tmp = __raw_readl(reg); |
| tmp &= ~(0x3 << shift); |
| tmp |= drvstr << shift; |
| |
| __raw_writel(tmp, reg); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(s5p_gpio_set_drvstr); |
| #endif /* CONFIG_S5P_GPIO_DRVSTR */ |
| |
| #ifdef CONFIG_PLAT_S3C24XX |
| unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) |
| { |
| unsigned long flags; |
| unsigned long misccr; |
| |
| local_irq_save(flags); |
| misccr = __raw_readl(S3C24XX_MISCCR); |
| misccr &= ~clear; |
| misccr ^= change; |
| __raw_writel(misccr, S3C24XX_MISCCR); |
| local_irq_restore(flags); |
| |
| return misccr; |
| } |
| EXPORT_SYMBOL(s3c2410_modify_misccr); |
| #endif |