| /* |
| * core.c - ChipIdea USB IP core family device controller |
| * |
| * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. |
| * |
| * Author: David Lopo |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /* |
| * Description: ChipIdea USB IP core family device controller |
| * |
| * This driver is composed of several blocks: |
| * - HW: hardware interface |
| * - DBG: debug facilities (optional) |
| * - UTIL: utilities |
| * - ISR: interrupts handling |
| * - ENDPT: endpoint operations (Gadget API) |
| * - GADGET: gadget operations (Gadget API) |
| * - BUS: bus glue code, bus abstraction layer |
| * |
| * Compile Options |
| * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities |
| * - STALL_IN: non-empty bulk-in pipes cannot be halted |
| * if defined mass storage compliance succeeds but with warnings |
| * => case 4: Hi > Dn |
| * => case 5: Hi > Di |
| * => case 8: Hi <> Do |
| * if undefined usbtest 13 fails |
| * - TRACE: enable function tracing (depends on DEBUG) |
| * |
| * Main Features |
| * - Chapter 9 & Mass Storage Compliance with Gadget File Storage |
| * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined) |
| * - Normal & LPM support |
| * |
| * USBTEST Report |
| * - OK: 0-12, 13 (STALL_IN defined) & 14 |
| * - Not Supported: 15 & 16 (ISO) |
| * |
| * TODO List |
| * - OTG |
| * - Interrupt Traffic |
| * - GET_STATUS(device) - always reports 0 |
| * - Gadget API (majority of optional features) |
| * - Suspend & Remote Wakeup |
| */ |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| #include <linux/module.h> |
| #include <linux/idr.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/otg.h> |
| #include <linux/usb/chipidea.h> |
| #include <linux/usb/of.h> |
| #include <linux/phy.h> |
| |
| #include "ci.h" |
| #include "udc.h" |
| #include "bits.h" |
| #include "host.h" |
| #include "debug.h" |
| |
| /* Controller register map */ |
| static uintptr_t ci_regs_nolpm[] = { |
| [CAP_CAPLENGTH] = 0x000UL, |
| [CAP_HCCPARAMS] = 0x008UL, |
| [CAP_DCCPARAMS] = 0x024UL, |
| [CAP_TESTMODE] = 0x038UL, |
| [OP_USBCMD] = 0x000UL, |
| [OP_USBSTS] = 0x004UL, |
| [OP_USBINTR] = 0x008UL, |
| [OP_DEVICEADDR] = 0x014UL, |
| [OP_ENDPTLISTADDR] = 0x018UL, |
| [OP_PORTSC] = 0x044UL, |
| [OP_DEVLC] = 0x084UL, |
| [OP_OTGSC] = 0x064UL, |
| [OP_USBMODE] = 0x068UL, |
| [OP_ENDPTSETUPSTAT] = 0x06CUL, |
| [OP_ENDPTPRIME] = 0x070UL, |
| [OP_ENDPTFLUSH] = 0x074UL, |
| [OP_ENDPTSTAT] = 0x078UL, |
| [OP_ENDPTCOMPLETE] = 0x07CUL, |
| [OP_ENDPTCTRL] = 0x080UL, |
| }; |
| |
| static uintptr_t ci_regs_lpm[] = { |
| [CAP_CAPLENGTH] = 0x000UL, |
| [CAP_HCCPARAMS] = 0x008UL, |
| [CAP_DCCPARAMS] = 0x024UL, |
| [CAP_TESTMODE] = 0x0FCUL, |
| [OP_USBCMD] = 0x000UL, |
| [OP_USBSTS] = 0x004UL, |
| [OP_USBINTR] = 0x008UL, |
| [OP_DEVICEADDR] = 0x014UL, |
| [OP_ENDPTLISTADDR] = 0x018UL, |
| [OP_PORTSC] = 0x044UL, |
| [OP_DEVLC] = 0x084UL, |
| [OP_OTGSC] = 0x0C4UL, |
| [OP_USBMODE] = 0x0C8UL, |
| [OP_ENDPTSETUPSTAT] = 0x0D8UL, |
| [OP_ENDPTPRIME] = 0x0DCUL, |
| [OP_ENDPTFLUSH] = 0x0E0UL, |
| [OP_ENDPTSTAT] = 0x0E4UL, |
| [OP_ENDPTCOMPLETE] = 0x0E8UL, |
| [OP_ENDPTCTRL] = 0x0ECUL, |
| }; |
| |
| static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm) |
| { |
| int i; |
| |
| kfree(ci->hw_bank.regmap); |
| |
| ci->hw_bank.regmap = kzalloc((OP_LAST + 1) * sizeof(void *), |
| GFP_KERNEL); |
| if (!ci->hw_bank.regmap) |
| return -ENOMEM; |
| |
| for (i = 0; i < OP_ENDPTCTRL; i++) |
| ci->hw_bank.regmap[i] = |
| (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) + |
| (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]); |
| |
| for (; i <= OP_LAST; i++) |
| ci->hw_bank.regmap[i] = ci->hw_bank.op + |
| 4 * (i - OP_ENDPTCTRL) + |
| (is_lpm |
| ? ci_regs_lpm[OP_ENDPTCTRL] |
| : ci_regs_nolpm[OP_ENDPTCTRL]); |
| |
| return 0; |
| } |
| |
| /** |
| * hw_port_test_set: writes port test mode (execute without interruption) |
| * @mode: new value |
| * |
| * This function returns an error code |
| */ |
| int hw_port_test_set(struct ci_hdrc *ci, u8 mode) |
| { |
| const u8 TEST_MODE_MAX = 7; |
| |
| if (mode > TEST_MODE_MAX) |
| return -EINVAL; |
| |
| hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC)); |
| return 0; |
| } |
| |
| /** |
| * hw_port_test_get: reads port test mode value |
| * |
| * This function returns port test mode value |
| */ |
| u8 hw_port_test_get(struct ci_hdrc *ci) |
| { |
| return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC); |
| } |
| |
| static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) |
| { |
| u32 reg; |
| |
| /* bank is a module variable */ |
| ci->hw_bank.abs = base; |
| |
| ci->hw_bank.cap = ci->hw_bank.abs; |
| ci->hw_bank.cap += ci->platdata->capoffset; |
| ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff); |
| |
| hw_alloc_regmap(ci, false); |
| reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >> |
| __ffs(HCCPARAMS_LEN); |
| ci->hw_bank.lpm = reg; |
| hw_alloc_regmap(ci, !!reg); |
| ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs; |
| ci->hw_bank.size += OP_LAST; |
| ci->hw_bank.size /= sizeof(u32); |
| |
| reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >> |
| __ffs(DCCPARAMS_DEN); |
| ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ |
| |
| if (ci->hw_ep_max > ENDPT_MAX) |
| return -ENODEV; |
| |
| dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n", |
| ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op); |
| |
| /* setup lock mode ? */ |
| |
| /* ENDPTSETUPSTAT is '0' by default */ |
| |
| /* HCSPARAMS.bf.ppc SHOULD BE zero for device */ |
| |
| return 0; |
| } |
| |
| static void hw_phymode_configure(struct ci_hdrc *ci) |
| { |
| u32 portsc, lpm, sts; |
| |
| switch (ci->platdata->phy_mode) { |
| case USBPHY_INTERFACE_MODE_UTMI: |
| portsc = PORTSC_PTS(PTS_UTMI); |
| lpm = DEVLC_PTS(PTS_UTMI); |
| break; |
| case USBPHY_INTERFACE_MODE_UTMIW: |
| portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW; |
| lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW; |
| break; |
| case USBPHY_INTERFACE_MODE_ULPI: |
| portsc = PORTSC_PTS(PTS_ULPI); |
| lpm = DEVLC_PTS(PTS_ULPI); |
| break; |
| case USBPHY_INTERFACE_MODE_SERIAL: |
| portsc = PORTSC_PTS(PTS_SERIAL); |
| lpm = DEVLC_PTS(PTS_SERIAL); |
| sts = 1; |
| break; |
| case USBPHY_INTERFACE_MODE_HSIC: |
| portsc = PORTSC_PTS(PTS_HSIC); |
| lpm = DEVLC_PTS(PTS_HSIC); |
| break; |
| default: |
| return; |
| } |
| |
| if (ci->hw_bank.lpm) { |
| hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm); |
| hw_write(ci, OP_DEVLC, DEVLC_STS, sts); |
| } else { |
| hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc); |
| hw_write(ci, OP_PORTSC, PORTSC_STS, sts); |
| } |
| } |
| |
| /** |
| * hw_device_reset: resets chip (execute without interruption) |
| * @ci: the controller |
| * |
| * This function returns an error code |
| */ |
| int hw_device_reset(struct ci_hdrc *ci, u32 mode) |
| { |
| /* should flush & stop before reset */ |
| hw_write(ci, OP_ENDPTFLUSH, ~0, ~0); |
| hw_write(ci, OP_USBCMD, USBCMD_RS, 0); |
| |
| hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST); |
| while (hw_read(ci, OP_USBCMD, USBCMD_RST)) |
| udelay(10); /* not RTOS friendly */ |
| |
| hw_phymode_configure(ci); |
| |
| if (ci->platdata->notify_event) |
| ci->platdata->notify_event(ci, |
| CI_HDRC_CONTROLLER_RESET_EVENT); |
| |
| if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING) |
| hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); |
| |
| /* USBMODE should be configured step by step */ |
| hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); |
| hw_write(ci, OP_USBMODE, USBMODE_CM, mode); |
| /* HW >= 2.3 */ |
| hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); |
| |
| if (hw_read(ci, OP_USBMODE, USBMODE_CM) != mode) { |
| pr_err("cannot enter in %s mode", ci_role(ci)->name); |
| pr_err("lpm = %i", ci->hw_bank.lpm); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ci_otg_role - pick role based on ID pin state |
| * @ci: the controller |
| */ |
| static enum ci_role ci_otg_role(struct ci_hdrc *ci) |
| { |
| u32 sts = hw_read(ci, OP_OTGSC, ~0); |
| enum ci_role role = sts & OTGSC_ID |
| ? CI_ROLE_GADGET |
| : CI_ROLE_HOST; |
| |
| return role; |
| } |
| |
| /** |
| * ci_role_work - perform role changing based on ID pin |
| * @work: work struct |
| */ |
| static void ci_role_work(struct work_struct *work) |
| { |
| struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work); |
| enum ci_role role = ci_otg_role(ci); |
| |
| if (role != ci->role) { |
| dev_dbg(ci->dev, "switching from %s to %s\n", |
| ci_role(ci)->name, ci->roles[role]->name); |
| |
| ci_role_stop(ci); |
| ci_role_start(ci, role); |
| } |
| |
| enable_irq(ci->irq); |
| } |
| |
| static irqreturn_t ci_irq(int irq, void *data) |
| { |
| struct ci_hdrc *ci = data; |
| irqreturn_t ret = IRQ_NONE; |
| u32 otgsc = 0; |
| |
| if (ci->is_otg) |
| otgsc = hw_read(ci, OP_OTGSC, ~0); |
| |
| if (ci->role != CI_ROLE_END) |
| ret = ci_role(ci)->irq(ci); |
| |
| if (ci->is_otg && (otgsc & OTGSC_IDIS)) { |
| hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS); |
| disable_irq_nosync(ci->irq); |
| queue_work(ci->wq, &ci->work); |
| ret = IRQ_HANDLED; |
| } |
| |
| return ret; |
| } |
| |
| static DEFINE_IDA(ci_ida); |
| |
| struct platform_device *ci_hdrc_add_device(struct device *dev, |
| struct resource *res, int nres, |
| struct ci_hdrc_platform_data *platdata) |
| { |
| struct platform_device *pdev; |
| int id, ret; |
| |
| id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL); |
| if (id < 0) |
| return ERR_PTR(id); |
| |
| pdev = platform_device_alloc("ci_hdrc", id); |
| if (!pdev) { |
| ret = -ENOMEM; |
| goto put_id; |
| } |
| |
| pdev->dev.parent = dev; |
| pdev->dev.dma_mask = dev->dma_mask; |
| pdev->dev.dma_parms = dev->dma_parms; |
| dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask); |
| |
| ret = platform_device_add_resources(pdev, res, nres); |
| if (ret) |
| goto err; |
| |
| ret = platform_device_add_data(pdev, platdata, sizeof(*platdata)); |
| if (ret) |
| goto err; |
| |
| ret = platform_device_add(pdev); |
| if (ret) |
| goto err; |
| |
| return pdev; |
| |
| err: |
| platform_device_put(pdev); |
| put_id: |
| ida_simple_remove(&ci_ida, id); |
| return ERR_PTR(ret); |
| } |
| EXPORT_SYMBOL_GPL(ci_hdrc_add_device); |
| |
| void ci_hdrc_remove_device(struct platform_device *pdev) |
| { |
| int id = pdev->id; |
| platform_device_unregister(pdev); |
| ida_simple_remove(&ci_ida, id); |
| } |
| EXPORT_SYMBOL_GPL(ci_hdrc_remove_device); |
| |
| static int ci_hdrc_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct ci_hdrc *ci; |
| struct resource *res; |
| void __iomem *base; |
| int ret; |
| enum usb_dr_mode dr_mode; |
| |
| if (!dev->platform_data) { |
| dev_err(dev, "platform data missing\n"); |
| return -ENODEV; |
| } |
| |
| if (!dev->of_node && dev->parent) |
| dev->of_node = dev->parent->of_node; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL); |
| if (!ci) { |
| dev_err(dev, "can't allocate device\n"); |
| return -ENOMEM; |
| } |
| |
| ci->dev = dev; |
| ci->platdata = dev->platform_data; |
| if (ci->platdata->phy) |
| ci->transceiver = ci->platdata->phy; |
| else |
| ci->global_phy = true; |
| |
| ret = hw_device_init(ci, base); |
| if (ret < 0) { |
| dev_err(dev, "can't initialize hardware\n"); |
| return -ENODEV; |
| } |
| |
| ci->hw_bank.phys = res->start; |
| |
| ci->irq = platform_get_irq(pdev, 0); |
| if (ci->irq < 0) { |
| dev_err(dev, "missing IRQ\n"); |
| return -ENODEV; |
| } |
| |
| INIT_WORK(&ci->work, ci_role_work); |
| ci->wq = create_singlethread_workqueue("ci_otg"); |
| if (!ci->wq) { |
| dev_err(dev, "can't create workqueue\n"); |
| return -ENODEV; |
| } |
| |
| if (!ci->platdata->phy_mode) |
| ci->platdata->phy_mode = of_usb_get_phy_mode(dev->of_node); |
| |
| if (!ci->platdata->dr_mode) |
| ci->platdata->dr_mode = of_usb_get_dr_mode(dev->of_node); |
| |
| if (ci->platdata->dr_mode == USB_DR_MODE_UNKNOWN) |
| ci->platdata->dr_mode = USB_DR_MODE_OTG; |
| |
| dr_mode = ci->platdata->dr_mode; |
| /* initialize role(s) before the interrupt is requested */ |
| if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { |
| ret = ci_hdrc_host_init(ci); |
| if (ret) |
| dev_info(dev, "doesn't support host\n"); |
| } |
| |
| if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) { |
| ret = ci_hdrc_gadget_init(ci); |
| if (ret) |
| dev_info(dev, "doesn't support gadget\n"); |
| } |
| |
| if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) { |
| dev_err(dev, "no supported roles\n"); |
| ret = -ENODEV; |
| goto rm_wq; |
| } |
| |
| if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) { |
| ci->is_otg = true; |
| /* ID pin needs 1ms debouce time, we delay 2ms for safe */ |
| mdelay(2); |
| ci->role = ci_otg_role(ci); |
| } else { |
| ci->role = ci->roles[CI_ROLE_HOST] |
| ? CI_ROLE_HOST |
| : CI_ROLE_GADGET; |
| } |
| |
| ret = ci_role_start(ci, ci->role); |
| if (ret) { |
| dev_err(dev, "can't start %s role\n", ci_role(ci)->name); |
| ret = -ENODEV; |
| goto rm_wq; |
| } |
| |
| platform_set_drvdata(pdev, ci); |
| ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name, |
| ci); |
| if (ret) |
| goto stop; |
| |
| if (ci->is_otg) |
| hw_write(ci, OP_OTGSC, OTGSC_IDIE, OTGSC_IDIE); |
| |
| ret = dbg_create_files(ci); |
| if (!ret) |
| return 0; |
| |
| free_irq(ci->irq, ci); |
| stop: |
| ci_role_stop(ci); |
| rm_wq: |
| flush_workqueue(ci->wq); |
| destroy_workqueue(ci->wq); |
| |
| return ret; |
| } |
| |
| static int ci_hdrc_remove(struct platform_device *pdev) |
| { |
| struct ci_hdrc *ci = platform_get_drvdata(pdev); |
| |
| dbg_remove_files(ci); |
| flush_workqueue(ci->wq); |
| destroy_workqueue(ci->wq); |
| free_irq(ci->irq, ci); |
| ci_role_stop(ci); |
| |
| return 0; |
| } |
| |
| static struct platform_driver ci_hdrc_driver = { |
| .probe = ci_hdrc_probe, |
| .remove = ci_hdrc_remove, |
| .driver = { |
| .name = "ci_hdrc", |
| }, |
| }; |
| |
| module_platform_driver(ci_hdrc_driver); |
| |
| MODULE_ALIAS("platform:ci_hdrc"); |
| MODULE_ALIAS("platform:ci13xxx"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>"); |
| MODULE_DESCRIPTION("ChipIdea HDRC Driver"); |