| /* |
| * Copyright (c) 2013 Intel Corporation. All rights reserved. |
| * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved. |
| * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #include <linux/spinlock.h> |
| #include <linux/pci.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/vmalloc.h> |
| #include <linux/module.h> |
| #include <linux/prefetch.h> |
| |
| #include "qib.h" |
| |
| /* |
| * The size has to be longer than this string, so we can append |
| * board/chip information to it in the init code. |
| */ |
| const char ib_qib_version[] = QIB_DRIVER_VERSION "\n"; |
| |
| DEFINE_SPINLOCK(qib_devs_lock); |
| LIST_HEAD(qib_dev_list); |
| DEFINE_MUTEX(qib_mutex); /* general driver use */ |
| |
| unsigned qib_ibmtu; |
| module_param_named(ibmtu, qib_ibmtu, uint, S_IRUGO); |
| MODULE_PARM_DESC(ibmtu, "Set max IB MTU (0=2KB, 1=256, 2=512, ... 5=4096"); |
| |
| unsigned qib_compat_ddr_negotiate = 1; |
| module_param_named(compat_ddr_negotiate, qib_compat_ddr_negotiate, uint, |
| S_IWUSR | S_IRUGO); |
| MODULE_PARM_DESC(compat_ddr_negotiate, |
| "Attempt pre-IBTA 1.2 DDR speed negotiation"); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_AUTHOR("Intel <ibsupport@intel.com>"); |
| MODULE_DESCRIPTION("Intel IB driver"); |
| MODULE_VERSION(QIB_DRIVER_VERSION); |
| |
| /* |
| * QIB_PIO_MAXIBHDR is the max IB header size allowed for in our |
| * PIO send buffers. This is well beyond anything currently |
| * defined in the InfiniBand spec. |
| */ |
| #define QIB_PIO_MAXIBHDR 128 |
| |
| /* |
| * QIB_MAX_PKT_RCV is the max # if packets processed per receive interrupt. |
| */ |
| #define QIB_MAX_PKT_RECV 64 |
| |
| struct qlogic_ib_stats qib_stats; |
| |
| const char *qib_get_unit_name(int unit) |
| { |
| static char iname[16]; |
| |
| snprintf(iname, sizeof iname, "infinipath%u", unit); |
| return iname; |
| } |
| |
| /* |
| * Return count of units with at least one port ACTIVE. |
| */ |
| int qib_count_active_units(void) |
| { |
| struct qib_devdata *dd; |
| struct qib_pportdata *ppd; |
| unsigned long flags; |
| int pidx, nunits_active = 0; |
| |
| spin_lock_irqsave(&qib_devs_lock, flags); |
| list_for_each_entry(dd, &qib_dev_list, list) { |
| if (!(dd->flags & QIB_PRESENT) || !dd->kregbase) |
| continue; |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) { |
| ppd = dd->pport + pidx; |
| if (ppd->lid && (ppd->lflags & (QIBL_LINKINIT | |
| QIBL_LINKARMED | QIBL_LINKACTIVE))) { |
| nunits_active++; |
| break; |
| } |
| } |
| } |
| spin_unlock_irqrestore(&qib_devs_lock, flags); |
| return nunits_active; |
| } |
| |
| /* |
| * Return count of all units, optionally return in arguments |
| * the number of usable (present) units, and the number of |
| * ports that are up. |
| */ |
| int qib_count_units(int *npresentp, int *nupp) |
| { |
| int nunits = 0, npresent = 0, nup = 0; |
| struct qib_devdata *dd; |
| unsigned long flags; |
| int pidx; |
| struct qib_pportdata *ppd; |
| |
| spin_lock_irqsave(&qib_devs_lock, flags); |
| |
| list_for_each_entry(dd, &qib_dev_list, list) { |
| nunits++; |
| if ((dd->flags & QIB_PRESENT) && dd->kregbase) |
| npresent++; |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) { |
| ppd = dd->pport + pidx; |
| if (ppd->lid && (ppd->lflags & (QIBL_LINKINIT | |
| QIBL_LINKARMED | QIBL_LINKACTIVE))) |
| nup++; |
| } |
| } |
| |
| spin_unlock_irqrestore(&qib_devs_lock, flags); |
| |
| if (npresentp) |
| *npresentp = npresent; |
| if (nupp) |
| *nupp = nup; |
| |
| return nunits; |
| } |
| |
| /** |
| * qib_wait_linkstate - wait for an IB link state change to occur |
| * @dd: the qlogic_ib device |
| * @state: the state to wait for |
| * @msecs: the number of milliseconds to wait |
| * |
| * wait up to msecs milliseconds for IB link state change to occur for |
| * now, take the easy polling route. Currently used only by |
| * qib_set_linkstate. Returns 0 if state reached, otherwise |
| * -ETIMEDOUT state can have multiple states set, for any of several |
| * transitions. |
| */ |
| int qib_wait_linkstate(struct qib_pportdata *ppd, u32 state, int msecs) |
| { |
| int ret; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| if (ppd->state_wanted) { |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| ret = -EBUSY; |
| goto bail; |
| } |
| ppd->state_wanted = state; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| wait_event_interruptible_timeout(ppd->state_wait, |
| (ppd->lflags & state), |
| msecs_to_jiffies(msecs)); |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->state_wanted = 0; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| |
| if (!(ppd->lflags & state)) |
| ret = -ETIMEDOUT; |
| else |
| ret = 0; |
| bail: |
| return ret; |
| } |
| |
| int qib_set_linkstate(struct qib_pportdata *ppd, u8 newstate) |
| { |
| u32 lstate; |
| int ret; |
| struct qib_devdata *dd = ppd->dd; |
| unsigned long flags; |
| |
| switch (newstate) { |
| case QIB_IB_LINKDOWN_ONLY: |
| dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, |
| IB_LINKCMD_DOWN | IB_LINKINITCMD_NOP); |
| /* don't wait */ |
| ret = 0; |
| goto bail; |
| |
| case QIB_IB_LINKDOWN: |
| dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, |
| IB_LINKCMD_DOWN | IB_LINKINITCMD_POLL); |
| /* don't wait */ |
| ret = 0; |
| goto bail; |
| |
| case QIB_IB_LINKDOWN_SLEEP: |
| dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, |
| IB_LINKCMD_DOWN | IB_LINKINITCMD_SLEEP); |
| /* don't wait */ |
| ret = 0; |
| goto bail; |
| |
| case QIB_IB_LINKDOWN_DISABLE: |
| dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, |
| IB_LINKCMD_DOWN | IB_LINKINITCMD_DISABLE); |
| /* don't wait */ |
| ret = 0; |
| goto bail; |
| |
| case QIB_IB_LINKARM: |
| if (ppd->lflags & QIBL_LINKARMED) { |
| ret = 0; |
| goto bail; |
| } |
| if (!(ppd->lflags & (QIBL_LINKINIT | QIBL_LINKACTIVE))) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| /* |
| * Since the port can be ACTIVE when we ask for ARMED, |
| * clear QIBL_LINKV so we can wait for a transition. |
| * If the link isn't ARMED, then something else happened |
| * and there is no point waiting for ARMED. |
| */ |
| spin_lock_irqsave(&ppd->lflags_lock, flags); |
| ppd->lflags &= ~QIBL_LINKV; |
| spin_unlock_irqrestore(&ppd->lflags_lock, flags); |
| dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, |
| IB_LINKCMD_ARMED | IB_LINKINITCMD_NOP); |
| lstate = QIBL_LINKV; |
| break; |
| |
| case QIB_IB_LINKACTIVE: |
| if (ppd->lflags & QIBL_LINKACTIVE) { |
| ret = 0; |
| goto bail; |
| } |
| if (!(ppd->lflags & QIBL_LINKARMED)) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, |
| IB_LINKCMD_ACTIVE | IB_LINKINITCMD_NOP); |
| lstate = QIBL_LINKACTIVE; |
| break; |
| |
| default: |
| ret = -EINVAL; |
| goto bail; |
| } |
| ret = qib_wait_linkstate(ppd, lstate, 10); |
| |
| bail: |
| return ret; |
| } |
| |
| /* |
| * Get address of eager buffer from it's index (allocated in chunks, not |
| * contiguous). |
| */ |
| static inline void *qib_get_egrbuf(const struct qib_ctxtdata *rcd, u32 etail) |
| { |
| const u32 chunk = etail >> rcd->rcvegrbufs_perchunk_shift; |
| const u32 idx = etail & ((u32)rcd->rcvegrbufs_perchunk - 1); |
| |
| return rcd->rcvegrbuf[chunk] + (idx << rcd->dd->rcvegrbufsize_shift); |
| } |
| |
| /* |
| * Returns 1 if error was a CRC, else 0. |
| * Needed for some chip's synthesized error counters. |
| */ |
| static u32 qib_rcv_hdrerr(struct qib_ctxtdata *rcd, struct qib_pportdata *ppd, |
| u32 ctxt, u32 eflags, u32 l, u32 etail, |
| __le32 *rhf_addr, struct qib_message_header *rhdr) |
| { |
| u32 ret = 0; |
| |
| if (eflags & (QLOGIC_IB_RHF_H_ICRCERR | QLOGIC_IB_RHF_H_VCRCERR)) |
| ret = 1; |
| else if (eflags == QLOGIC_IB_RHF_H_TIDERR) { |
| /* For TIDERR and RC QPs premptively schedule a NAK */ |
| struct qib_ib_header *hdr = (struct qib_ib_header *) rhdr; |
| struct qib_other_headers *ohdr = NULL; |
| struct qib_ibport *ibp = &ppd->ibport_data; |
| struct qib_qp *qp = NULL; |
| u32 tlen = qib_hdrget_length_in_bytes(rhf_addr); |
| u16 lid = be16_to_cpu(hdr->lrh[1]); |
| int lnh = be16_to_cpu(hdr->lrh[0]) & 3; |
| u32 qp_num; |
| u32 opcode; |
| u32 psn; |
| int diff; |
| |
| /* Sanity check packet */ |
| if (tlen < 24) |
| goto drop; |
| |
| if (lid < QIB_MULTICAST_LID_BASE) { |
| lid &= ~((1 << ppd->lmc) - 1); |
| if (unlikely(lid != ppd->lid)) |
| goto drop; |
| } |
| |
| /* Check for GRH */ |
| if (lnh == QIB_LRH_BTH) |
| ohdr = &hdr->u.oth; |
| else if (lnh == QIB_LRH_GRH) { |
| u32 vtf; |
| |
| ohdr = &hdr->u.l.oth; |
| if (hdr->u.l.grh.next_hdr != IB_GRH_NEXT_HDR) |
| goto drop; |
| vtf = be32_to_cpu(hdr->u.l.grh.version_tclass_flow); |
| if ((vtf >> IB_GRH_VERSION_SHIFT) != IB_GRH_VERSION) |
| goto drop; |
| } else |
| goto drop; |
| |
| /* Get opcode and PSN from packet */ |
| opcode = be32_to_cpu(ohdr->bth[0]); |
| opcode >>= 24; |
| psn = be32_to_cpu(ohdr->bth[2]); |
| |
| /* Get the destination QP number. */ |
| qp_num = be32_to_cpu(ohdr->bth[1]) & QIB_QPN_MASK; |
| if (qp_num != QIB_MULTICAST_QPN) { |
| int ruc_res; |
| qp = qib_lookup_qpn(ibp, qp_num); |
| if (!qp) |
| goto drop; |
| |
| /* |
| * Handle only RC QPs - for other QP types drop error |
| * packet. |
| */ |
| spin_lock(&qp->r_lock); |
| |
| /* Check for valid receive state. */ |
| if (!(ib_qib_state_ops[qp->state] & |
| QIB_PROCESS_RECV_OK)) { |
| ibp->n_pkt_drops++; |
| goto unlock; |
| } |
| |
| switch (qp->ibqp.qp_type) { |
| case IB_QPT_RC: |
| ruc_res = |
| qib_ruc_check_hdr( |
| ibp, hdr, |
| lnh == QIB_LRH_GRH, |
| qp, |
| be32_to_cpu(ohdr->bth[0])); |
| if (ruc_res) |
| goto unlock; |
| |
| /* Only deal with RDMA Writes for now */ |
| if (opcode < |
| IB_OPCODE_RC_RDMA_READ_RESPONSE_FIRST) { |
| diff = qib_cmp24(psn, qp->r_psn); |
| if (!qp->r_nak_state && diff >= 0) { |
| ibp->n_rc_seqnak++; |
| qp->r_nak_state = |
| IB_NAK_PSN_ERROR; |
| /* Use the expected PSN. */ |
| qp->r_ack_psn = qp->r_psn; |
| /* |
| * Wait to send the sequence |
| * NAK until all packets |
| * in the receive queue have |
| * been processed. |
| * Otherwise, we end up |
| * propagating congestion. |
| */ |
| if (list_empty(&qp->rspwait)) { |
| qp->r_flags |= |
| QIB_R_RSP_NAK; |
| atomic_inc( |
| &qp->refcount); |
| list_add_tail( |
| &qp->rspwait, |
| &rcd->qp_wait_list); |
| } |
| } /* Out of sequence NAK */ |
| } /* QP Request NAKs */ |
| break; |
| case IB_QPT_SMI: |
| case IB_QPT_GSI: |
| case IB_QPT_UD: |
| case IB_QPT_UC: |
| default: |
| /* For now don't handle any other QP types */ |
| break; |
| } |
| |
| unlock: |
| spin_unlock(&qp->r_lock); |
| /* |
| * Notify qib_destroy_qp() if it is waiting |
| * for us to finish. |
| */ |
| if (atomic_dec_and_test(&qp->refcount)) |
| wake_up(&qp->wait); |
| } /* Unicast QP */ |
| } /* Valid packet with TIDErr */ |
| |
| drop: |
| return ret; |
| } |
| |
| /* |
| * qib_kreceive - receive a packet |
| * @rcd: the qlogic_ib context |
| * @llic: gets count of good packets needed to clear lli, |
| * (used with chips that need need to track crcs for lli) |
| * |
| * called from interrupt handler for errors or receive interrupt |
| * Returns number of CRC error packets, needed by some chips for |
| * local link integrity tracking. crcs are adjusted down by following |
| * good packets, if any, and count of good packets is also tracked. |
| */ |
| u32 qib_kreceive(struct qib_ctxtdata *rcd, u32 *llic, u32 *npkts) |
| { |
| struct qib_devdata *dd = rcd->dd; |
| struct qib_pportdata *ppd = rcd->ppd; |
| __le32 *rhf_addr; |
| void *ebuf; |
| const u32 rsize = dd->rcvhdrentsize; /* words */ |
| const u32 maxcnt = dd->rcvhdrcnt * rsize; /* words */ |
| u32 etail = -1, l, hdrqtail; |
| struct qib_message_header *hdr; |
| u32 eflags, etype, tlen, i = 0, updegr = 0, crcs = 0; |
| int last; |
| u64 lval; |
| struct qib_qp *qp, *nqp; |
| |
| l = rcd->head; |
| rhf_addr = (__le32 *) rcd->rcvhdrq + l + dd->rhf_offset; |
| if (dd->flags & QIB_NODMA_RTAIL) { |
| u32 seq = qib_hdrget_seq(rhf_addr); |
| if (seq != rcd->seq_cnt) |
| goto bail; |
| hdrqtail = 0; |
| } else { |
| hdrqtail = qib_get_rcvhdrtail(rcd); |
| if (l == hdrqtail) |
| goto bail; |
| smp_rmb(); /* prevent speculative reads of dma'ed hdrq */ |
| } |
| |
| for (last = 0, i = 1; !last; i += !last) { |
| hdr = dd->f_get_msgheader(dd, rhf_addr); |
| eflags = qib_hdrget_err_flags(rhf_addr); |
| etype = qib_hdrget_rcv_type(rhf_addr); |
| /* total length */ |
| tlen = qib_hdrget_length_in_bytes(rhf_addr); |
| ebuf = NULL; |
| if ((dd->flags & QIB_NODMA_RTAIL) ? |
| qib_hdrget_use_egr_buf(rhf_addr) : |
| (etype != RCVHQ_RCV_TYPE_EXPECTED)) { |
| etail = qib_hdrget_index(rhf_addr); |
| updegr = 1; |
| if (tlen > sizeof(*hdr) || |
| etype >= RCVHQ_RCV_TYPE_NON_KD) { |
| ebuf = qib_get_egrbuf(rcd, etail); |
| prefetch_range(ebuf, tlen - sizeof(*hdr)); |
| } |
| } |
| if (!eflags) { |
| u16 lrh_len = be16_to_cpu(hdr->lrh[2]) << 2; |
| |
| if (lrh_len != tlen) { |
| qib_stats.sps_lenerrs++; |
| goto move_along; |
| } |
| } |
| if (etype == RCVHQ_RCV_TYPE_NON_KD && !eflags && |
| ebuf == NULL && |
| tlen > (dd->rcvhdrentsize - 2 + 1 - |
| qib_hdrget_offset(rhf_addr)) << 2) { |
| goto move_along; |
| } |
| |
| /* |
| * Both tiderr and qibhdrerr are set for all plain IB |
| * packets; only qibhdrerr should be set. |
| */ |
| if (unlikely(eflags)) |
| crcs += qib_rcv_hdrerr(rcd, ppd, rcd->ctxt, eflags, l, |
| etail, rhf_addr, hdr); |
| else if (etype == RCVHQ_RCV_TYPE_NON_KD) { |
| qib_ib_rcv(rcd, hdr, ebuf, tlen); |
| if (crcs) |
| crcs--; |
| else if (llic && *llic) |
| --*llic; |
| } |
| move_along: |
| l += rsize; |
| if (l >= maxcnt) |
| l = 0; |
| if (i == QIB_MAX_PKT_RECV) |
| last = 1; |
| |
| rhf_addr = (__le32 *) rcd->rcvhdrq + l + dd->rhf_offset; |
| if (dd->flags & QIB_NODMA_RTAIL) { |
| u32 seq = qib_hdrget_seq(rhf_addr); |
| |
| if (++rcd->seq_cnt > 13) |
| rcd->seq_cnt = 1; |
| if (seq != rcd->seq_cnt) |
| last = 1; |
| } else if (l == hdrqtail) |
| last = 1; |
| /* |
| * Update head regs etc., every 16 packets, if not last pkt, |
| * to help prevent rcvhdrq overflows, when many packets |
| * are processed and queue is nearly full. |
| * Don't request an interrupt for intermediate updates. |
| */ |
| lval = l; |
| if (!last && !(i & 0xf)) { |
| dd->f_update_usrhead(rcd, lval, updegr, etail, i); |
| updegr = 0; |
| } |
| } |
| /* |
| * Notify qib_destroy_qp() if it is waiting |
| * for lookaside_qp to finish. |
| */ |
| if (rcd->lookaside_qp) { |
| if (atomic_dec_and_test(&rcd->lookaside_qp->refcount)) |
| wake_up(&rcd->lookaside_qp->wait); |
| rcd->lookaside_qp = NULL; |
| } |
| |
| rcd->head = l; |
| |
| /* |
| * Iterate over all QPs waiting to respond. |
| * The list won't change since the IRQ is only run on one CPU. |
| */ |
| list_for_each_entry_safe(qp, nqp, &rcd->qp_wait_list, rspwait) { |
| list_del_init(&qp->rspwait); |
| if (qp->r_flags & QIB_R_RSP_NAK) { |
| qp->r_flags &= ~QIB_R_RSP_NAK; |
| qib_send_rc_ack(qp); |
| } |
| if (qp->r_flags & QIB_R_RSP_SEND) { |
| unsigned long flags; |
| |
| qp->r_flags &= ~QIB_R_RSP_SEND; |
| spin_lock_irqsave(&qp->s_lock, flags); |
| if (ib_qib_state_ops[qp->state] & |
| QIB_PROCESS_OR_FLUSH_SEND) |
| qib_schedule_send(qp); |
| spin_unlock_irqrestore(&qp->s_lock, flags); |
| } |
| if (atomic_dec_and_test(&qp->refcount)) |
| wake_up(&qp->wait); |
| } |
| |
| bail: |
| /* Report number of packets consumed */ |
| if (npkts) |
| *npkts = i; |
| |
| /* |
| * Always write head at end, and setup rcv interrupt, even |
| * if no packets were processed. |
| */ |
| lval = (u64)rcd->head | dd->rhdrhead_intr_off; |
| dd->f_update_usrhead(rcd, lval, updegr, etail, i); |
| return crcs; |
| } |
| |
| /** |
| * qib_set_mtu - set the MTU |
| * @ppd: the perport data |
| * @arg: the new MTU |
| * |
| * We can handle "any" incoming size, the issue here is whether we |
| * need to restrict our outgoing size. For now, we don't do any |
| * sanity checking on this, and we don't deal with what happens to |
| * programs that are already running when the size changes. |
| * NOTE: changing the MTU will usually cause the IBC to go back to |
| * link INIT state... |
| */ |
| int qib_set_mtu(struct qib_pportdata *ppd, u16 arg) |
| { |
| u32 piosize; |
| int ret, chk; |
| |
| if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 && |
| arg != 4096) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| chk = ib_mtu_enum_to_int(qib_ibmtu); |
| if (chk > 0 && arg > chk) { |
| ret = -EINVAL; |
| goto bail; |
| } |
| |
| piosize = ppd->ibmaxlen; |
| ppd->ibmtu = arg; |
| |
| if (arg >= (piosize - QIB_PIO_MAXIBHDR)) { |
| /* Only if it's not the initial value (or reset to it) */ |
| if (piosize != ppd->init_ibmaxlen) { |
| if (arg > piosize && arg <= ppd->init_ibmaxlen) |
| piosize = ppd->init_ibmaxlen - 2 * sizeof(u32); |
| ppd->ibmaxlen = piosize; |
| } |
| } else if ((arg + QIB_PIO_MAXIBHDR) != ppd->ibmaxlen) { |
| piosize = arg + QIB_PIO_MAXIBHDR - 2 * sizeof(u32); |
| ppd->ibmaxlen = piosize; |
| } |
| |
| ppd->dd->f_set_ib_cfg(ppd, QIB_IB_CFG_MTU, 0); |
| |
| ret = 0; |
| |
| bail: |
| return ret; |
| } |
| |
| int qib_set_lid(struct qib_pportdata *ppd, u32 lid, u8 lmc) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| ppd->lid = lid; |
| ppd->lmc = lmc; |
| |
| dd->f_set_ib_cfg(ppd, QIB_IB_CFG_LIDLMC, |
| lid | (~((1U << lmc) - 1)) << 16); |
| |
| qib_devinfo(dd->pcidev, "IB%u:%u got a lid: 0x%x\n", |
| dd->unit, ppd->port, lid); |
| |
| return 0; |
| } |
| |
| /* |
| * Following deal with the "obviously simple" task of overriding the state |
| * of the LEDS, which normally indicate link physical and logical status. |
| * The complications arise in dealing with different hardware mappings |
| * and the board-dependent routine being called from interrupts. |
| * and then there's the requirement to _flash_ them. |
| */ |
| #define LED_OVER_FREQ_SHIFT 8 |
| #define LED_OVER_FREQ_MASK (0xFF<<LED_OVER_FREQ_SHIFT) |
| /* Below is "non-zero" to force override, but both actual LEDs are off */ |
| #define LED_OVER_BOTH_OFF (8) |
| |
| static void qib_run_led_override(unsigned long opaque) |
| { |
| struct qib_pportdata *ppd = (struct qib_pportdata *)opaque; |
| struct qib_devdata *dd = ppd->dd; |
| int timeoff; |
| int ph_idx; |
| |
| if (!(dd->flags & QIB_INITTED)) |
| return; |
| |
| ph_idx = ppd->led_override_phase++ & 1; |
| ppd->led_override = ppd->led_override_vals[ph_idx]; |
| timeoff = ppd->led_override_timeoff; |
| |
| dd->f_setextled(ppd, 1); |
| /* |
| * don't re-fire the timer if user asked for it to be off; we let |
| * it fire one more time after they turn it off to simplify |
| */ |
| if (ppd->led_override_vals[0] || ppd->led_override_vals[1]) |
| mod_timer(&ppd->led_override_timer, jiffies + timeoff); |
| } |
| |
| void qib_set_led_override(struct qib_pportdata *ppd, unsigned int val) |
| { |
| struct qib_devdata *dd = ppd->dd; |
| int timeoff, freq; |
| |
| if (!(dd->flags & QIB_INITTED)) |
| return; |
| |
| /* First check if we are blinking. If not, use 1HZ polling */ |
| timeoff = HZ; |
| freq = (val & LED_OVER_FREQ_MASK) >> LED_OVER_FREQ_SHIFT; |
| |
| if (freq) { |
| /* For blink, set each phase from one nybble of val */ |
| ppd->led_override_vals[0] = val & 0xF; |
| ppd->led_override_vals[1] = (val >> 4) & 0xF; |
| timeoff = (HZ << 4)/freq; |
| } else { |
| /* Non-blink set both phases the same. */ |
| ppd->led_override_vals[0] = val & 0xF; |
| ppd->led_override_vals[1] = val & 0xF; |
| } |
| ppd->led_override_timeoff = timeoff; |
| |
| /* |
| * If the timer has not already been started, do so. Use a "quick" |
| * timeout so the function will be called soon, to look at our request. |
| */ |
| if (atomic_inc_return(&ppd->led_override_timer_active) == 1) { |
| /* Need to start timer */ |
| init_timer(&ppd->led_override_timer); |
| ppd->led_override_timer.function = qib_run_led_override; |
| ppd->led_override_timer.data = (unsigned long) ppd; |
| ppd->led_override_timer.expires = jiffies + 1; |
| add_timer(&ppd->led_override_timer); |
| } else { |
| if (ppd->led_override_vals[0] || ppd->led_override_vals[1]) |
| mod_timer(&ppd->led_override_timer, jiffies + 1); |
| atomic_dec(&ppd->led_override_timer_active); |
| } |
| } |
| |
| /** |
| * qib_reset_device - reset the chip if possible |
| * @unit: the device to reset |
| * |
| * Whether or not reset is successful, we attempt to re-initialize the chip |
| * (that is, much like a driver unload/reload). We clear the INITTED flag |
| * so that the various entry points will fail until we reinitialize. For |
| * now, we only allow this if no user contexts are open that use chip resources |
| */ |
| int qib_reset_device(int unit) |
| { |
| int ret, i; |
| struct qib_devdata *dd = qib_lookup(unit); |
| struct qib_pportdata *ppd; |
| unsigned long flags; |
| int pidx; |
| |
| if (!dd) { |
| ret = -ENODEV; |
| goto bail; |
| } |
| |
| qib_devinfo(dd->pcidev, "Reset on unit %u requested\n", unit); |
| |
| if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) { |
| qib_devinfo(dd->pcidev, |
| "Invalid unit number %u or not initialized or not present\n", |
| unit); |
| ret = -ENXIO; |
| goto bail; |
| } |
| |
| spin_lock_irqsave(&dd->uctxt_lock, flags); |
| if (dd->rcd) |
| for (i = dd->first_user_ctxt; i < dd->cfgctxts; i++) { |
| if (!dd->rcd[i] || !dd->rcd[i]->cnt) |
| continue; |
| spin_unlock_irqrestore(&dd->uctxt_lock, flags); |
| ret = -EBUSY; |
| goto bail; |
| } |
| spin_unlock_irqrestore(&dd->uctxt_lock, flags); |
| |
| for (pidx = 0; pidx < dd->num_pports; ++pidx) { |
| ppd = dd->pport + pidx; |
| if (atomic_read(&ppd->led_override_timer_active)) { |
| /* Need to stop LED timer, _then_ shut off LEDs */ |
| del_timer_sync(&ppd->led_override_timer); |
| atomic_set(&ppd->led_override_timer_active, 0); |
| } |
| |
| /* Shut off LEDs after we are sure timer is not running */ |
| ppd->led_override = LED_OVER_BOTH_OFF; |
| dd->f_setextled(ppd, 0); |
| if (dd->flags & QIB_HAS_SEND_DMA) |
| qib_teardown_sdma(ppd); |
| } |
| |
| ret = dd->f_reset(dd); |
| if (ret == 1) |
| ret = qib_init(dd, 1); |
| else |
| ret = -EAGAIN; |
| if (ret) |
| qib_dev_err(dd, |
| "Reinitialize unit %u after reset failed with %d\n", |
| unit, ret); |
| else |
| qib_devinfo(dd->pcidev, |
| "Reinitialized unit %u after resetting\n", |
| unit); |
| |
| bail: |
| return ret; |
| } |