blob: d0138d7a31a1d607012c08d6dd8c4f1f1d6ca953 [file] [log] [blame]
/*******************************************************************************
Intel 82599 Virtual Function driver
Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information:
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
#include "vf.h"
#include "ixgbevf.h"
/**
* ixgbevf_start_hw_vf - Prepare hardware for Tx/Rx
* @hw: pointer to hardware structure
*
* Starts the hardware by filling the bus info structure and media type, clears
* all on chip counters, initializes receive address registers, multicast
* table, VLAN filter table, calls routine to set up link and flow control
* settings, and leaves transmit and receive units disabled and uninitialized
**/
static s32 ixgbevf_start_hw_vf(struct ixgbe_hw *hw)
{
/* Clear adapter stopped flag */
hw->adapter_stopped = false;
return 0;
}
/**
* ixgbevf_init_hw_vf - virtual function hardware initialization
* @hw: pointer to hardware structure
*
* Initialize the hardware by resetting the hardware and then starting
* the hardware
**/
static s32 ixgbevf_init_hw_vf(struct ixgbe_hw *hw)
{
s32 status = hw->mac.ops.start_hw(hw);
hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
return status;
}
/**
* ixgbevf_reset_hw_vf - Performs hardware reset
* @hw: pointer to hardware structure
*
* Resets the hardware by reseting the transmit and receive units, masks and
* clears all interrupts.
**/
static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)
{
struct ixgbe_mbx_info *mbx = &hw->mbx;
u32 timeout = IXGBE_VF_INIT_TIMEOUT;
s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
u8 *addr = (u8 *)(&msgbuf[1]);
/* Call adapter stop to disable tx/rx and clear interrupts */
hw->mac.ops.stop_adapter(hw);
IXGBE_WRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
IXGBE_WRITE_FLUSH(hw);
/* we cannot reset while the RSTI / RSTD bits are asserted */
while (!mbx->ops.check_for_rst(hw) && timeout) {
timeout--;
udelay(5);
}
if (!timeout)
return IXGBE_ERR_RESET_FAILED;
/* mailbox timeout can now become active */
mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
msgbuf[0] = IXGBE_VF_RESET;
mbx->ops.write_posted(hw, msgbuf, 1);
msleep(10);
/* set our "perm_addr" based on info provided by PF */
/* also set up the mc_filter_type which is piggy backed
* on the mac address in word 3 */
ret_val = mbx->ops.read_posted(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN);
if (ret_val)
return ret_val;
if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK))
return IXGBE_ERR_INVALID_MAC_ADDR;
memcpy(hw->mac.perm_addr, addr, ETH_ALEN);
hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
return 0;
}
/**
* ixgbevf_stop_hw_vf - Generic stop Tx/Rx units
* @hw: pointer to hardware structure
*
* Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
* disables transmit and receive units. The adapter_stopped flag is used by
* the shared code and drivers to determine if the adapter is in a stopped
* state and should not touch the hardware.
**/
static s32 ixgbevf_stop_hw_vf(struct ixgbe_hw *hw)
{
u32 number_of_queues;
u32 reg_val;
u16 i;
/*
* Set the adapter_stopped flag so other driver functions stop touching
* the hardware
*/
hw->adapter_stopped = true;
/* Disable the receive unit by stopped each queue */
number_of_queues = hw->mac.max_rx_queues;
for (i = 0; i < number_of_queues; i++) {
reg_val = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
if (reg_val & IXGBE_RXDCTL_ENABLE) {
reg_val &= ~IXGBE_RXDCTL_ENABLE;
IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
}
}
IXGBE_WRITE_FLUSH(hw);
/* Clear interrupt mask to stop from interrupts being generated */
IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
/* Clear any pending interrupts */
IXGBE_READ_REG(hw, IXGBE_VTEICR);
/* Disable the transmit unit. Each queue must be disabled. */
number_of_queues = hw->mac.max_tx_queues;
for (i = 0; i < number_of_queues; i++) {
reg_val = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
if (reg_val & IXGBE_TXDCTL_ENABLE) {
reg_val &= ~IXGBE_TXDCTL_ENABLE;
IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), reg_val);
}
}
return 0;
}
/**
* ixgbevf_mta_vector - Determines bit-vector in multicast table to set
* @hw: pointer to hardware structure
* @mc_addr: the multicast address
*
* Extracts the 12 bits, from a multicast address, to determine which
* bit-vector to set in the multicast table. The hardware uses 12 bits, from
* incoming rx multicast addresses, to determine the bit-vector to check in
* the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
* by the MO field of the MCSTCTRL. The MO field is set during initialization
* to mc_filter_type.
**/
static s32 ixgbevf_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
{
u32 vector = 0;
switch (hw->mac.mc_filter_type) {
case 0: /* use bits [47:36] of the address */
vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
break;
case 1: /* use bits [46:35] of the address */
vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
break;
case 2: /* use bits [45:34] of the address */
vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
break;
case 3: /* use bits [43:32] of the address */
vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
break;
default: /* Invalid mc_filter_type */
break;
}
/* vector can only be 12-bits or boundary will be exceeded */
vector &= 0xFFF;
return vector;
}
/**
* ixgbevf_get_mac_addr_vf - Read device MAC address
* @hw: pointer to the HW structure
* @mac_addr: pointer to storage for retrieved MAC address
**/
static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
{
memcpy(mac_addr, hw->mac.perm_addr, ETH_ALEN);
return 0;
}
static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
{
struct ixgbe_mbx_info *mbx = &hw->mbx;
u32 msgbuf[3];
u8 *msg_addr = (u8 *)(&msgbuf[1]);
s32 ret_val;
memset(msgbuf, 0, sizeof(msgbuf));
/*
* If index is one then this is the start of a new list and needs
* indication to the PF so it can do it's own list management.
* If it is zero then that tells the PF to just clear all of
* this VF's macvlans and there is no new list.
*/
msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
if (addr)
memcpy(msg_addr, addr, 6);
ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
if (!ret_val)
ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
if (!ret_val)
if (msgbuf[0] ==
(IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
ret_val = -ENOMEM;
return ret_val;
}
/**
* ixgbevf_set_rar_vf - set device MAC address
* @hw: pointer to hardware structure
* @index: Receive address register to write
* @addr: Address to put into receive address register
* @vmdq: Unused in this implementation
**/
static s32 ixgbevf_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr,
u32 vmdq)
{
struct ixgbe_mbx_info *mbx = &hw->mbx;
u32 msgbuf[3];
u8 *msg_addr = (u8 *)(&msgbuf[1]);
s32 ret_val;
memset(msgbuf, 0, sizeof(msgbuf));
msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
memcpy(msg_addr, addr, 6);
ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
if (!ret_val)
ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
/* if nacked the address was rejected, use "perm_addr" */
if (!ret_val &&
(msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
ixgbevf_get_mac_addr_vf(hw, hw->mac.addr);
return ret_val;
}
/**
* ixgbevf_update_mc_addr_list_vf - Update Multicast addresses
* @hw: pointer to the HW structure
* @netdev: pointer to net device structure
*
* Updates the Multicast Table Array.
**/
static s32 ixgbevf_update_mc_addr_list_vf(struct ixgbe_hw *hw,
struct net_device *netdev)
{
struct netdev_hw_addr *ha;
struct ixgbe_mbx_info *mbx = &hw->mbx;
u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
u16 *vector_list = (u16 *)&msgbuf[1];
u32 cnt, i;
/* Each entry in the list uses 1 16 bit word. We have 30
* 16 bit words available in our HW msg buffer (minus 1 for the
* msg type). That's 30 hash values if we pack 'em right. If
* there are more than 30 MC addresses to add then punt the
* extras for now and then add code to handle more than 30 later.
* It would be unusual for a server to request that many multi-cast
* addresses except for in large enterprise network environments.
*/
cnt = netdev_mc_count(netdev);
if (cnt > 30)
cnt = 30;
msgbuf[0] = IXGBE_VF_SET_MULTICAST;
msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
i = 0;
netdev_for_each_mc_addr(ha, netdev) {
if (i == cnt)
break;
vector_list[i++] = ixgbevf_mta_vector(hw, ha->addr);
}
mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE);
return 0;
}
/**
* ixgbevf_set_vfta_vf - Set/Unset vlan filter table address
* @hw: pointer to the HW structure
* @vlan: 12 bit VLAN ID
* @vind: unused by VF drivers
* @vlan_on: if true then set bit, else clear bit
**/
static s32 ixgbevf_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
bool vlan_on)
{
struct ixgbe_mbx_info *mbx = &hw->mbx;
u32 msgbuf[2];
msgbuf[0] = IXGBE_VF_SET_VLAN;
msgbuf[1] = vlan;
/* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
return mbx->ops.write_posted(hw, msgbuf, 2);
}
/**
* ixgbevf_setup_mac_link_vf - Setup MAC link settings
* @hw: pointer to hardware structure
* @speed: Unused in this implementation
* @autoneg: Unused in this implementation
* @autoneg_wait_to_complete: Unused in this implementation
*
* Do nothing and return success. VF drivers are not allowed to change
* global settings. Maintained for driver compatibility.
**/
static s32 ixgbevf_setup_mac_link_vf(struct ixgbe_hw *hw,
ixgbe_link_speed speed, bool autoneg,
bool autoneg_wait_to_complete)
{
return 0;
}
/**
* ixgbevf_check_mac_link_vf - Get link/speed status
* @hw: pointer to hardware structure
* @speed: pointer to link speed
* @link_up: true is link is up, false otherwise
* @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Reads the links register to determine if link is up and the current speed
**/
static s32 ixgbevf_check_mac_link_vf(struct ixgbe_hw *hw,
ixgbe_link_speed *speed,
bool *link_up,
bool autoneg_wait_to_complete)
{
u32 links_reg;
if (!(hw->mbx.ops.check_for_rst(hw))) {
*link_up = false;
*speed = 0;
return -1;
}
links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
if (links_reg & IXGBE_LINKS_UP)
*link_up = true;
else
*link_up = false;
if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
IXGBE_LINKS_SPEED_10G_82599)
*speed = IXGBE_LINK_SPEED_10GB_FULL;
else
*speed = IXGBE_LINK_SPEED_1GB_FULL;
return 0;
}
static const struct ixgbe_mac_operations ixgbevf_mac_ops = {
.init_hw = ixgbevf_init_hw_vf,
.reset_hw = ixgbevf_reset_hw_vf,
.start_hw = ixgbevf_start_hw_vf,
.get_mac_addr = ixgbevf_get_mac_addr_vf,
.stop_adapter = ixgbevf_stop_hw_vf,
.setup_link = ixgbevf_setup_mac_link_vf,
.check_link = ixgbevf_check_mac_link_vf,
.set_rar = ixgbevf_set_rar_vf,
.update_mc_addr_list = ixgbevf_update_mc_addr_list_vf,
.set_uc_addr = ixgbevf_set_uc_addr_vf,
.set_vfta = ixgbevf_set_vfta_vf,
};
const struct ixgbevf_info ixgbevf_82599_vf_info = {
.mac = ixgbe_mac_82599_vf,
.mac_ops = &ixgbevf_mac_ops,
};
const struct ixgbevf_info ixgbevf_X540_vf_info = {
.mac = ixgbe_mac_X540_vf,
.mac_ops = &ixgbevf_mac_ops,
};