| /* |
| * This file contains low-level cache management functions |
| * used for sleep and CPU speed changes on Apple machines. |
| * (In fact the only thing that is Apple-specific is that we assume |
| * that we can read from ROM at physical address 0xfff00000.) |
| * |
| * Copyright (C) 2004 Paul Mackerras (paulus@samba.org) and |
| * Benjamin Herrenschmidt (benh@kernel.crashing.org) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/config.h> |
| #include <asm/processor.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/cputable.h> |
| |
| /* |
| * Flush and disable all data caches (dL1, L2, L3). This is used |
| * when going to sleep, when doing a PMU based cpufreq transition, |
| * or when "offlining" a CPU on SMP machines. This code is over |
| * paranoid, but I've had enough issues with various CPU revs and |
| * bugs that I decided it was worth beeing over cautious |
| */ |
| |
| _GLOBAL(flush_disable_caches) |
| #ifndef CONFIG_6xx |
| blr |
| #else |
| BEGIN_FTR_SECTION |
| b flush_disable_745x |
| END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) |
| BEGIN_FTR_SECTION |
| b flush_disable_75x |
| END_FTR_SECTION_IFSET(CPU_FTR_L2CR) |
| b __flush_disable_L1 |
| |
| /* This is the code for G3 and 74[01]0 */ |
| flush_disable_75x: |
| mflr r10 |
| |
| /* Turn off EE and DR in MSR */ |
| mfmsr r11 |
| rlwinm r0,r11,0,~MSR_EE |
| rlwinm r0,r0,0,~MSR_DR |
| sync |
| mtmsr r0 |
| isync |
| |
| /* Stop DST streams */ |
| BEGIN_FTR_SECTION |
| DSSALL |
| sync |
| END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) |
| |
| /* Stop DPM */ |
| mfspr r8,SPRN_HID0 /* Save SPRN_HID0 in r8 */ |
| rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */ |
| sync |
| mtspr SPRN_HID0,r4 /* Disable DPM */ |
| sync |
| |
| /* Disp-flush L1. We have a weird problem here that I never |
| * totally figured out. On 750FX, using the ROM for the flush |
| * results in a non-working flush. We use that workaround for |
| * now until I finally understand what's going on. --BenH |
| */ |
| |
| /* ROM base by default */ |
| lis r4,0xfff0 |
| mfpvr r3 |
| srwi r3,r3,16 |
| cmplwi cr0,r3,0x7000 |
| bne+ 1f |
| /* RAM base on 750FX */ |
| li r4,0 |
| 1: li r4,0x4000 |
| mtctr r4 |
| 1: lwz r0,0(r4) |
| addi r4,r4,32 |
| bdnz 1b |
| sync |
| isync |
| |
| /* Disable / invalidate / enable L1 data */ |
| mfspr r3,SPRN_HID0 |
| rlwinm r3,r3,0,~(HID0_DCE | HID0_ICE) |
| mtspr SPRN_HID0,r3 |
| sync |
| isync |
| ori r3,r3,(HID0_DCE|HID0_DCI|HID0_ICE|HID0_ICFI) |
| sync |
| isync |
| mtspr SPRN_HID0,r3 |
| xori r3,r3,(HID0_DCI|HID0_ICFI) |
| mtspr SPRN_HID0,r3 |
| sync |
| |
| /* Get the current enable bit of the L2CR into r4 */ |
| mfspr r5,SPRN_L2CR |
| /* Set to data-only (pre-745x bit) */ |
| oris r3,r5,L2CR_L2DO@h |
| b 2f |
| /* When disabling L2, code must be in L1 */ |
| .balign 32 |
| 1: mtspr SPRN_L2CR,r3 |
| 3: sync |
| isync |
| b 1f |
| 2: b 3f |
| 3: sync |
| isync |
| b 1b |
| 1: /* disp-flush L2. The interesting thing here is that the L2 can be |
| * up to 2Mb ... so using the ROM, we'll end up wrapping back to memory |
| * but that is probbaly fine. We disp-flush over 4Mb to be safe |
| */ |
| lis r4,2 |
| mtctr r4 |
| lis r4,0xfff0 |
| 1: lwz r0,0(r4) |
| addi r4,r4,32 |
| bdnz 1b |
| sync |
| isync |
| lis r4,2 |
| mtctr r4 |
| lis r4,0xfff0 |
| 1: dcbf 0,r4 |
| addi r4,r4,32 |
| bdnz 1b |
| sync |
| isync |
| |
| /* now disable L2 */ |
| rlwinm r5,r5,0,~L2CR_L2E |
| b 2f |
| /* When disabling L2, code must be in L1 */ |
| .balign 32 |
| 1: mtspr SPRN_L2CR,r5 |
| 3: sync |
| isync |
| b 1f |
| 2: b 3f |
| 3: sync |
| isync |
| b 1b |
| 1: sync |
| isync |
| /* Invalidate L2. This is pre-745x, we clear the L2I bit ourselves */ |
| oris r4,r5,L2CR_L2I@h |
| mtspr SPRN_L2CR,r4 |
| sync |
| isync |
| |
| /* Wait for the invalidation to complete */ |
| 1: mfspr r3,SPRN_L2CR |
| rlwinm. r0,r3,0,31,31 |
| bne 1b |
| |
| /* Clear L2I */ |
| xoris r4,r4,L2CR_L2I@h |
| sync |
| mtspr SPRN_L2CR,r4 |
| sync |
| |
| /* now disable the L1 data cache */ |
| mfspr r0,SPRN_HID0 |
| rlwinm r0,r0,0,~(HID0_DCE|HID0_ICE) |
| mtspr SPRN_HID0,r0 |
| sync |
| isync |
| |
| /* Restore HID0[DPM] to whatever it was before */ |
| sync |
| mfspr r0,SPRN_HID0 |
| rlwimi r0,r8,0,11,11 /* Turn back HID0[DPM] */ |
| mtspr SPRN_HID0,r0 |
| sync |
| |
| /* restore DR and EE */ |
| sync |
| mtmsr r11 |
| isync |
| |
| mtlr r10 |
| blr |
| |
| /* This code is for 745x processors */ |
| flush_disable_745x: |
| /* Turn off EE and DR in MSR */ |
| mfmsr r11 |
| rlwinm r0,r11,0,~MSR_EE |
| rlwinm r0,r0,0,~MSR_DR |
| sync |
| mtmsr r0 |
| isync |
| |
| /* Stop prefetch streams */ |
| DSSALL |
| sync |
| |
| /* Disable L2 prefetching */ |
| mfspr r0,SPRN_MSSCR0 |
| rlwinm r0,r0,0,0,29 |
| mtspr SPRN_MSSCR0,r0 |
| sync |
| isync |
| lis r4,0 |
| dcbf 0,r4 |
| dcbf 0,r4 |
| dcbf 0,r4 |
| dcbf 0,r4 |
| dcbf 0,r4 |
| dcbf 0,r4 |
| dcbf 0,r4 |
| dcbf 0,r4 |
| |
| /* Due to a bug with the HW flush on some CPU revs, we occasionally |
| * experience data corruption. I'm adding a displacement flush along |
| * with a dcbf loop over a few Mb to "help". The problem isn't totally |
| * fixed by this in theory, but at least, in practice, I couldn't reproduce |
| * it even with a big hammer... |
| */ |
| |
| lis r4,0x0002 |
| mtctr r4 |
| li r4,0 |
| 1: |
| lwz r0,0(r4) |
| addi r4,r4,32 /* Go to start of next cache line */ |
| bdnz 1b |
| isync |
| |
| /* Now, flush the first 4MB of memory */ |
| lis r4,0x0002 |
| mtctr r4 |
| li r4,0 |
| sync |
| 1: |
| dcbf 0,r4 |
| addi r4,r4,32 /* Go to start of next cache line */ |
| bdnz 1b |
| |
| /* Flush and disable the L1 data cache */ |
| mfspr r6,SPRN_LDSTCR |
| lis r3,0xfff0 /* read from ROM for displacement flush */ |
| li r4,0xfe /* start with only way 0 unlocked */ |
| li r5,128 /* 128 lines in each way */ |
| 1: mtctr r5 |
| rlwimi r6,r4,0,24,31 |
| mtspr SPRN_LDSTCR,r6 |
| sync |
| isync |
| 2: lwz r0,0(r3) /* touch each cache line */ |
| addi r3,r3,32 |
| bdnz 2b |
| rlwinm r4,r4,1,24,30 /* move on to the next way */ |
| ori r4,r4,1 |
| cmpwi r4,0xff /* all done? */ |
| bne 1b |
| /* now unlock the L1 data cache */ |
| li r4,0 |
| rlwimi r6,r4,0,24,31 |
| sync |
| mtspr SPRN_LDSTCR,r6 |
| sync |
| isync |
| |
| /* Flush the L2 cache using the hardware assist */ |
| mfspr r3,SPRN_L2CR |
| cmpwi r3,0 /* check if it is enabled first */ |
| bge 4f |
| oris r0,r3,(L2CR_L2IO_745x|L2CR_L2DO_745x)@h |
| b 2f |
| /* When disabling/locking L2, code must be in L1 */ |
| .balign 32 |
| 1: mtspr SPRN_L2CR,r0 /* lock the L2 cache */ |
| 3: sync |
| isync |
| b 1f |
| 2: b 3f |
| 3: sync |
| isync |
| b 1b |
| 1: sync |
| isync |
| ori r0,r3,L2CR_L2HWF_745x |
| sync |
| mtspr SPRN_L2CR,r0 /* set the hardware flush bit */ |
| 3: mfspr r0,SPRN_L2CR /* wait for it to go to 0 */ |
| andi. r0,r0,L2CR_L2HWF_745x |
| bne 3b |
| sync |
| rlwinm r3,r3,0,~L2CR_L2E |
| b 2f |
| /* When disabling L2, code must be in L1 */ |
| .balign 32 |
| 1: mtspr SPRN_L2CR,r3 /* disable the L2 cache */ |
| 3: sync |
| isync |
| b 1f |
| 2: b 3f |
| 3: sync |
| isync |
| b 1b |
| 1: sync |
| isync |
| oris r4,r3,L2CR_L2I@h |
| mtspr SPRN_L2CR,r4 |
| sync |
| isync |
| 1: mfspr r4,SPRN_L2CR |
| andis. r0,r4,L2CR_L2I@h |
| bne 1b |
| sync |
| |
| BEGIN_FTR_SECTION |
| /* Flush the L3 cache using the hardware assist */ |
| 4: mfspr r3,SPRN_L3CR |
| cmpwi r3,0 /* check if it is enabled */ |
| bge 6f |
| oris r0,r3,L3CR_L3IO@h |
| ori r0,r0,L3CR_L3DO |
| sync |
| mtspr SPRN_L3CR,r0 /* lock the L3 cache */ |
| sync |
| isync |
| ori r0,r0,L3CR_L3HWF |
| sync |
| mtspr SPRN_L3CR,r0 /* set the hardware flush bit */ |
| 5: mfspr r0,SPRN_L3CR /* wait for it to go to zero */ |
| andi. r0,r0,L3CR_L3HWF |
| bne 5b |
| rlwinm r3,r3,0,~L3CR_L3E |
| sync |
| mtspr SPRN_L3CR,r3 /* disable the L3 cache */ |
| sync |
| ori r4,r3,L3CR_L3I |
| mtspr SPRN_L3CR,r4 |
| 1: mfspr r4,SPRN_L3CR |
| andi. r0,r4,L3CR_L3I |
| bne 1b |
| sync |
| END_FTR_SECTION_IFSET(CPU_FTR_L3CR) |
| |
| 6: mfspr r0,SPRN_HID0 /* now disable the L1 data cache */ |
| rlwinm r0,r0,0,~HID0_DCE |
| mtspr SPRN_HID0,r0 |
| sync |
| isync |
| mtmsr r11 /* restore DR and EE */ |
| isync |
| blr |
| #endif /* CONFIG_6xx */ |
