| /* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $ |
| * linux/arch/cris/kernel/fasttimer.c |
| * |
| * Fast timers for ETRAX100/ETRAX100LX |
| * This may be useful in other OS than Linux so use 2 space indentation... |
| * |
| * $Log: fasttimer.c,v $ |
| * Revision 1.9 2005/03/04 08:16:16 starvik |
| * Merge of Linux 2.6.11. |
| * |
| * Revision 1.8 2005/01/05 06:09:29 starvik |
| * cli()/sti() will be obsolete in 2.6.11. |
| * |
| * Revision 1.7 2005/01/03 13:35:46 starvik |
| * Removed obsolete stuff. |
| * Mark fast timer IRQ as not shared. |
| * |
| * Revision 1.6 2004/05/14 10:18:39 starvik |
| * Export fast_timer_list |
| * |
| * Revision 1.5 2004/05/14 07:58:01 starvik |
| * Merge of changes from 2.4 |
| * |
| * Revision 1.4 2003/07/04 08:27:41 starvik |
| * Merge of Linux 2.5.74 |
| * |
| * Revision 1.3 2002/12/12 08:26:32 starvik |
| * Don't use C-comments inside CVS comments |
| * |
| * Revision 1.2 2002/12/11 15:42:02 starvik |
| * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/ |
| * |
| * Revision 1.1 2002/11/18 07:58:06 starvik |
| * Fast timers (from Linux 2.4) |
| * |
| * Revision 1.5 2002/10/15 06:21:39 starvik |
| * Added call to init_waitqueue_head |
| * |
| * Revision 1.4 2002/05/28 17:47:59 johana |
| * Added del_fast_timer() |
| * |
| * Revision 1.3 2002/05/28 16:16:07 johana |
| * Handle empty fast_timer_list |
| * |
| * Revision 1.2 2002/05/27 15:38:42 johana |
| * Made it compile without warnings on Linux 2.4. |
| * (includes, wait_queue, PROC_FS and snprintf) |
| * |
| * Revision 1.1 2002/05/27 15:32:25 johana |
| * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree. |
| * |
| * Revision 1.8 2001/11/27 13:50:40 pkj |
| * Disable interrupts while stopping the timer and while modifying the |
| * list of active timers in timer1_handler() as it may be interrupted |
| * by other interrupts (e.g., the serial interrupt) which may add fast |
| * timers. |
| * |
| * Revision 1.7 2001/11/22 11:50:32 pkj |
| * * Only store information about the last 16 timers. |
| * * proc_fasttimer_read() now uses an allocated buffer, since it |
| * requires more space than just a page even for only writing the |
| * last 16 timers. The buffer is only allocated on request, so |
| * unless /proc/fasttimer is read, it is never allocated. |
| * * Renamed fast_timer_started to fast_timers_started to match |
| * fast_timers_added and fast_timers_expired. |
| * * Some clean-up. |
| * |
| * Revision 1.6 2000/12/13 14:02:08 johana |
| * Removed volatile for fast_timer_list |
| * |
| * Revision 1.5 2000/12/13 13:55:35 johana |
| * Added DEBUG_LOG, added som cli() and cleanup |
| * |
| * Revision 1.4 2000/12/05 13:48:50 johana |
| * Added range check when writing proc file, modified timer int handling |
| * |
| * Revision 1.3 2000/11/23 10:10:20 johana |
| * More debug/logging possibilities. |
| * Moved GET_JIFFIES_USEC() to timex.h and time.c |
| * |
| * Revision 1.2 2000/11/01 13:41:04 johana |
| * Clean up and bugfixes. |
| * Created new do_gettimeofday_fast() that gets a timeval struct |
| * with time based on jiffies and *R_TIMER0_DATA, uses a table |
| * for fast conversion of timer value to microseconds. |
| * (Much faster the standard do_gettimeofday() and we don't really |
| * wan't to use the true time - we wan't the "uptime" so timers don't screw up |
| * when we change the time. |
| * TODO: Add efficient support for continuous timers as well. |
| * |
| * Revision 1.1 2000/10/26 15:49:16 johana |
| * Added fasttimer, highresolution timers. |
| * |
| * Copyright (C) 2000,2001 2002 Axis Communications AB, Lund, Sweden |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/param.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/vmalloc.h> |
| #include <linux/interrupt.h> |
| #include <linux/time.h> |
| #include <linux/delay.h> |
| |
| #include <asm/segment.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/delay.h> |
| #include <asm/rtc.h> |
| |
| #include <linux/config.h> |
| |
| #include <asm/arch/svinto.h> |
| #include <asm/fasttimer.h> |
| #include <linux/proc_fs.h> |
| |
| |
| #define DEBUG_LOG_INCLUDED |
| #define FAST_TIMER_LOG |
| //#define FAST_TIMER_TEST |
| |
| #define FAST_TIMER_SANITY_CHECKS |
| |
| #ifdef FAST_TIMER_SANITY_CHECKS |
| #define SANITYCHECK(x) x |
| static int sanity_failed = 0; |
| #else |
| #define SANITYCHECK(x) |
| #endif |
| |
| #define D1(x) |
| #define D2(x) |
| #define DP(x) |
| |
| #define __INLINE__ inline |
| |
| static int fast_timer_running = 0; |
| static int fast_timers_added = 0; |
| static int fast_timers_started = 0; |
| static int fast_timers_expired = 0; |
| static int fast_timers_deleted = 0; |
| static int fast_timer_is_init = 0; |
| static int fast_timer_ints = 0; |
| |
| struct fast_timer *fast_timer_list = NULL; |
| |
| #ifdef DEBUG_LOG_INCLUDED |
| #define DEBUG_LOG_MAX 128 |
| static const char * debug_log_string[DEBUG_LOG_MAX]; |
| static unsigned long debug_log_value[DEBUG_LOG_MAX]; |
| static int debug_log_cnt = 0; |
| static int debug_log_cnt_wrapped = 0; |
| |
| #define DEBUG_LOG(string, value) \ |
| { \ |
| unsigned long log_flags; \ |
| local_irq_save(log_flags); \ |
| debug_log_string[debug_log_cnt] = (string); \ |
| debug_log_value[debug_log_cnt] = (unsigned long)(value); \ |
| if (++debug_log_cnt >= DEBUG_LOG_MAX) \ |
| { \ |
| debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \ |
| debug_log_cnt_wrapped = 1; \ |
| } \ |
| local_irq_restore(log_flags); \ |
| } |
| #else |
| #define DEBUG_LOG(string, value) |
| #endif |
| |
| |
| /* The frequencies for index = clkselx number in R_TIMER_CTRL */ |
| #define NUM_TIMER_FREQ 15 |
| #define MAX_USABLE_TIMER_FREQ 7 |
| #define MAX_DELAY_US 853333L |
| const unsigned long timer_freq_100[NUM_TIMER_FREQ] = |
| { |
| 3, /* 0 3333 - 853333 us */ |
| 6, /* 1 1666 - 426666 us */ |
| 12, /* 2 833 - 213333 us */ |
| 24, /* 3 416 - 106666 us */ |
| 48, /* 4 208 - 53333 us */ |
| 96, /* 5 104 - 26666 us */ |
| 192, /* 6 52 - 13333 us */ |
| 384, /* 7 26 - 6666 us */ |
| 576, |
| 1152, |
| 2304, |
| 4608, |
| 9216, |
| 18432, |
| 62500, |
| /* 15 = cascade */ |
| }; |
| #define NUM_TIMER_STATS 16 |
| #ifdef FAST_TIMER_LOG |
| struct fast_timer timer_added_log[NUM_TIMER_STATS]; |
| struct fast_timer timer_started_log[NUM_TIMER_STATS]; |
| struct fast_timer timer_expired_log[NUM_TIMER_STATS]; |
| #endif |
| |
| int timer_div_settings[NUM_TIMER_STATS]; |
| int timer_freq_settings[NUM_TIMER_STATS]; |
| int timer_delay_settings[NUM_TIMER_STATS]; |
| |
| /* Not true gettimeofday, only checks the jiffies (uptime) + useconds */ |
| void __INLINE__ do_gettimeofday_fast(struct timeval *tv) |
| { |
| unsigned long sec = jiffies; |
| unsigned long usec = GET_JIFFIES_USEC(); |
| |
| usec += (sec % HZ) * (1000000 / HZ); |
| sec = sec / HZ; |
| |
| if (usec > 1000000) |
| { |
| usec -= 1000000; |
| sec++; |
| } |
| tv->tv_sec = sec; |
| tv->tv_usec = usec; |
| } |
| |
| int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1) |
| { |
| if (t0->tv_sec < t1->tv_sec) |
| { |
| return -1; |
| } |
| else if (t0->tv_sec > t1->tv_sec) |
| { |
| return 1; |
| } |
| if (t0->tv_usec < t1->tv_usec) |
| { |
| return -1; |
| } |
| else if (t0->tv_usec > t1->tv_usec) |
| { |
| return 1; |
| } |
| return 0; |
| } |
| |
| void __INLINE__ start_timer1(unsigned long delay_us) |
| { |
| int freq_index = 0; /* This is the lowest resolution */ |
| unsigned long upper_limit = MAX_DELAY_US; |
| |
| unsigned long div; |
| /* Start/Restart the timer to the new shorter value */ |
| /* t = 1/freq = 1/19200 = 53us |
| * T=div*t, div = T/t = delay_us*freq/1000000 |
| */ |
| #if 1 /* Adaptive timer settings */ |
| while (delay_us < upper_limit && freq_index < MAX_USABLE_TIMER_FREQ) |
| { |
| freq_index++; |
| upper_limit >>= 1; /* Divide by 2 using shift */ |
| } |
| if (freq_index > 0) |
| { |
| freq_index--; |
| } |
| #else |
| freq_index = 6; |
| #endif |
| div = delay_us * timer_freq_100[freq_index]/10000; |
| if (div < 2) |
| { |
| /* Maybe increase timer freq? */ |
| div = 2; |
| } |
| if (div > 255) |
| { |
| div = 0; /* This means 256, the max the timer takes */ |
| /* If a longer timeout than the timer can handle is used, |
| * then we must restart it when it goes off. |
| */ |
| } |
| |
| timer_div_settings[fast_timers_started % NUM_TIMER_STATS] = div; |
| timer_freq_settings[fast_timers_started % NUM_TIMER_STATS] = freq_index; |
| timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us; |
| |
| D1(printk("start_timer1 : %d us freq: %i div: %i\n", |
| delay_us, freq_index, div)); |
| /* Clear timer1 irq */ |
| *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr); |
| |
| /* Set timer values */ |
| *R_TIMER_CTRL = r_timer_ctrl_shadow = |
| (r_timer_ctrl_shadow & |
| ~IO_MASK(R_TIMER_CTRL, timerdiv1) & |
| ~IO_MASK(R_TIMER_CTRL, tm1) & |
| ~IO_MASK(R_TIMER_CTRL, clksel1)) | |
| IO_FIELD(R_TIMER_CTRL, timerdiv1, div) | |
| IO_STATE(R_TIMER_CTRL, tm1, stop_ld) | |
| IO_FIELD(R_TIMER_CTRL, clksel1, freq_index ); /* 6=c19k2Hz */ |
| |
| /* Ack interrupt */ |
| *R_TIMER_CTRL = r_timer_ctrl_shadow | |
| IO_STATE(R_TIMER_CTRL, i1, clr); |
| |
| /* Start timer */ |
| *R_TIMER_CTRL = r_timer_ctrl_shadow = |
| (r_timer_ctrl_shadow & ~IO_MASK(R_TIMER_CTRL, tm1)) | |
| IO_STATE(R_TIMER_CTRL, tm1, run); |
| |
| /* Enable timer1 irq */ |
| *R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, timer1, set); |
| fast_timers_started++; |
| fast_timer_running = 1; |
| } |
| |
| /* In version 1.4 this function takes 27 - 50 us */ |
| void start_one_shot_timer(struct fast_timer *t, |
| fast_timer_function_type *function, |
| unsigned long data, |
| unsigned long delay_us, |
| const char *name) |
| { |
| unsigned long flags; |
| struct fast_timer *tmp; |
| |
| D1(printk("sft %s %d us\n", name, delay_us)); |
| |
| local_irq_save(flags); |
| |
| do_gettimeofday_fast(&t->tv_set); |
| tmp = fast_timer_list; |
| |
| SANITYCHECK({ /* Check so this is not in the list already... */ |
| while (tmp != NULL) |
| { |
| if (tmp == t) |
| { |
| printk(KERN_WARNING |
| "timer name: %s data: 0x%08lX already in list!\n", name, data); |
| sanity_failed++; |
| return; |
| } |
| else |
| { |
| tmp = tmp->next; |
| } |
| } |
| tmp = fast_timer_list; |
| }); |
| |
| t->delay_us = delay_us; |
| t->function = function; |
| t->data = data; |
| t->name = name; |
| |
| t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000; |
| t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000; |
| if (t->tv_expires.tv_usec > 1000000) |
| { |
| t->tv_expires.tv_usec -= 1000000; |
| t->tv_expires.tv_sec++; |
| } |
| #ifdef FAST_TIMER_LOG |
| timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t; |
| #endif |
| fast_timers_added++; |
| |
| /* Check if this should timeout before anything else */ |
| if (tmp == NULL || timeval_cmp(&t->tv_expires, &tmp->tv_expires) < 0) |
| { |
| /* Put first in list and modify the timer value */ |
| t->prev = NULL; |
| t->next = fast_timer_list; |
| if (fast_timer_list) |
| { |
| fast_timer_list->prev = t; |
| } |
| fast_timer_list = t; |
| #ifdef FAST_TIMER_LOG |
| timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t; |
| #endif |
| start_timer1(delay_us); |
| } else { |
| /* Put in correct place in list */ |
| while (tmp->next && |
| timeval_cmp(&t->tv_expires, &tmp->next->tv_expires) > 0) |
| { |
| tmp = tmp->next; |
| } |
| /* Insert t after tmp */ |
| t->prev = tmp; |
| t->next = tmp->next; |
| if (tmp->next) |
| { |
| tmp->next->prev = t; |
| } |
| tmp->next = t; |
| } |
| |
| D2(printk("start_one_shot_timer: %d us done\n", delay_us)); |
| |
| local_irq_restore(flags); |
| } /* start_one_shot_timer */ |
| |
| static inline int fast_timer_pending (const struct fast_timer * t) |
| { |
| return (t->next != NULL) || (t->prev != NULL) || (t == fast_timer_list); |
| } |
| |
| static inline int detach_fast_timer (struct fast_timer *t) |
| { |
| struct fast_timer *next, *prev; |
| if (!fast_timer_pending(t)) |
| return 0; |
| next = t->next; |
| prev = t->prev; |
| if (next) |
| next->prev = prev; |
| if (prev) |
| prev->next = next; |
| else |
| fast_timer_list = next; |
| fast_timers_deleted++; |
| return 1; |
| } |
| |
| int del_fast_timer(struct fast_timer * t) |
| { |
| unsigned long flags; |
| int ret; |
| |
| local_irq_save(flags); |
| ret = detach_fast_timer(t); |
| t->next = t->prev = NULL; |
| local_irq_restore(flags); |
| return ret; |
| } /* del_fast_timer */ |
| |
| |
| /* Interrupt routines or functions called in interrupt context */ |
| |
| /* Timer 1 interrupt handler */ |
| |
| static irqreturn_t |
| timer1_handler(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct fast_timer *t; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| /* Clear timer1 irq */ |
| *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr); |
| |
| /* First stop timer, then ack interrupt */ |
| /* Stop timer */ |
| *R_TIMER_CTRL = r_timer_ctrl_shadow = |
| (r_timer_ctrl_shadow & ~IO_MASK(R_TIMER_CTRL, tm1)) | |
| IO_STATE(R_TIMER_CTRL, tm1, stop_ld); |
| |
| /* Ack interrupt */ |
| *R_TIMER_CTRL = r_timer_ctrl_shadow | IO_STATE(R_TIMER_CTRL, i1, clr); |
| |
| fast_timer_running = 0; |
| fast_timer_ints++; |
| |
| local_irq_restore(flags); |
| |
| t = fast_timer_list; |
| while (t) |
| { |
| struct timeval tv; |
| |
| /* Has it really expired? */ |
| do_gettimeofday_fast(&tv); |
| D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec)); |
| |
| if (timeval_cmp(&t->tv_expires, &tv) <= 0) |
| { |
| /* Yes it has expired */ |
| #ifdef FAST_TIMER_LOG |
| timer_expired_log[fast_timers_expired % NUM_TIMER_STATS] = *t; |
| #endif |
| fast_timers_expired++; |
| |
| /* Remove this timer before call, since it may reuse the timer */ |
| local_irq_save(flags); |
| if (t->prev) |
| { |
| t->prev->next = t->next; |
| } |
| else |
| { |
| fast_timer_list = t->next; |
| } |
| if (t->next) |
| { |
| t->next->prev = t->prev; |
| } |
| t->prev = NULL; |
| t->next = NULL; |
| local_irq_restore(flags); |
| |
| if (t->function != NULL) |
| { |
| t->function(t->data); |
| } |
| else |
| { |
| DEBUG_LOG("!timer1 %i function==NULL!\n", fast_timer_ints); |
| } |
| } |
| else |
| { |
| /* Timer is to early, let's set it again using the normal routines */ |
| D1(printk(".\n")); |
| } |
| |
| local_irq_save(flags); |
| if ((t = fast_timer_list) != NULL) |
| { |
| /* Start next timer.. */ |
| long us; |
| struct timeval tv; |
| |
| do_gettimeofday_fast(&tv); |
| us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 + |
| t->tv_expires.tv_usec - tv.tv_usec); |
| if (us > 0) |
| { |
| if (!fast_timer_running) |
| { |
| #ifdef FAST_TIMER_LOG |
| timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t; |
| #endif |
| start_timer1(us); |
| } |
| local_irq_restore(flags); |
| break; |
| } |
| else |
| { |
| /* Timer already expired, let's handle it better late than never. |
| * The normal loop handles it |
| */ |
| D1(printk("e! %d\n", us)); |
| } |
| } |
| local_irq_restore(flags); |
| } |
| |
| if (!t) |
| { |
| D1(printk("t1 stop!\n")); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void wake_up_func(unsigned long data) |
| { |
| #ifdef DECLARE_WAITQUEUE |
| wait_queue_head_t *sleep_wait_p = (wait_queue_head_t*)data; |
| #else |
| struct wait_queue **sleep_wait_p = (struct wait_queue **)data; |
| #endif |
| wake_up(sleep_wait_p); |
| } |
| |
| |
| /* Useful API */ |
| |
| void schedule_usleep(unsigned long us) |
| { |
| struct fast_timer t; |
| #ifdef DECLARE_WAITQUEUE |
| wait_queue_head_t sleep_wait; |
| init_waitqueue_head(&sleep_wait); |
| { |
| DECLARE_WAITQUEUE(wait, current); |
| #else |
| struct wait_queue *sleep_wait = NULL; |
| struct wait_queue wait = { current, NULL }; |
| #endif |
| |
| D1(printk("schedule_usleep(%d)\n", us)); |
| add_wait_queue(&sleep_wait, &wait); |
| set_current_state(TASK_INTERRUPTIBLE); |
| start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us, |
| "usleep"); |
| schedule(); |
| set_current_state(TASK_RUNNING); |
| remove_wait_queue(&sleep_wait, &wait); |
| D1(printk("done schedule_usleep(%d)\n", us)); |
| #ifdef DECLARE_WAITQUEUE |
| } |
| #endif |
| } |
| |
| #ifdef CONFIG_PROC_FS |
| static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len |
| ,int *eof, void *data_unused); |
| static struct proc_dir_entry *fasttimer_proc_entry; |
| #endif /* CONFIG_PROC_FS */ |
| |
| #ifdef CONFIG_PROC_FS |
| |
| /* This value is very much based on testing */ |
| #define BIG_BUF_SIZE (500 + NUM_TIMER_STATS * 300) |
| |
| static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len |
| ,int *eof, void *data_unused) |
| { |
| unsigned long flags; |
| int i = 0; |
| int num_to_show; |
| struct timeval tv; |
| struct fast_timer *t, *nextt; |
| static char *bigbuf = NULL; |
| static unsigned long used; |
| |
| if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE))) |
| { |
| used = 0; |
| bigbuf[0] = '\0'; |
| return 0; |
| } |
| |
| if (!offset || !used) |
| { |
| do_gettimeofday_fast(&tv); |
| |
| used = 0; |
| used += sprintf(bigbuf + used, "Fast timers added: %i\n", |
| fast_timers_added); |
| used += sprintf(bigbuf + used, "Fast timers started: %i\n", |
| fast_timers_started); |
| used += sprintf(bigbuf + used, "Fast timer interrupts: %i\n", |
| fast_timer_ints); |
| used += sprintf(bigbuf + used, "Fast timers expired: %i\n", |
| fast_timers_expired); |
| used += sprintf(bigbuf + used, "Fast timers deleted: %i\n", |
| fast_timers_deleted); |
| used += sprintf(bigbuf + used, "Fast timer running: %s\n", |
| fast_timer_running ? "yes" : "no"); |
| used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n", |
| (unsigned long)tv.tv_sec, |
| (unsigned long)tv.tv_usec); |
| #ifdef FAST_TIMER_SANITY_CHECKS |
| used += sprintf(bigbuf + used, "Sanity failed: %i\n", |
| sanity_failed); |
| #endif |
| used += sprintf(bigbuf + used, "\n"); |
| |
| #ifdef DEBUG_LOG_INCLUDED |
| { |
| int end_i = debug_log_cnt; |
| i = 0; |
| |
| if (debug_log_cnt_wrapped) |
| { |
| i = debug_log_cnt; |
| } |
| |
| while ((i != end_i || (debug_log_cnt_wrapped && !used)) && |
| used+100 < BIG_BUF_SIZE) |
| { |
| used += sprintf(bigbuf + used, debug_log_string[i], |
| debug_log_value[i]); |
| i = (i+1) % DEBUG_LOG_MAX; |
| } |
| } |
| used += sprintf(bigbuf + used, "\n"); |
| #endif |
| |
| num_to_show = (fast_timers_started < NUM_TIMER_STATS ? fast_timers_started: |
| NUM_TIMER_STATS); |
| used += sprintf(bigbuf + used, "Timers started: %i\n", fast_timers_started); |
| for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE) ; i++) |
| { |
| int cur = (fast_timers_started - i - 1) % NUM_TIMER_STATS; |
| |
| #if 1 //ndef FAST_TIMER_LOG |
| used += sprintf(bigbuf + used, "div: %i freq: %i delay: %i" |
| "\n", |
| timer_div_settings[cur], |
| timer_freq_settings[cur], |
| timer_delay_settings[cur] |
| ); |
| #endif |
| #ifdef FAST_TIMER_LOG |
| t = &timer_started_log[cur]; |
| used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu " |
| "d: %6li us data: 0x%08lX" |
| "\n", |
| t->name, |
| (unsigned long)t->tv_set.tv_sec, |
| (unsigned long)t->tv_set.tv_usec, |
| (unsigned long)t->tv_expires.tv_sec, |
| (unsigned long)t->tv_expires.tv_usec, |
| t->delay_us, |
| t->data |
| ); |
| #endif |
| } |
| used += sprintf(bigbuf + used, "\n"); |
| |
| #ifdef FAST_TIMER_LOG |
| num_to_show = (fast_timers_added < NUM_TIMER_STATS ? fast_timers_added: |
| NUM_TIMER_STATS); |
| used += sprintf(bigbuf + used, "Timers added: %i\n", fast_timers_added); |
| for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE); i++) |
| { |
| t = &timer_added_log[(fast_timers_added - i - 1) % NUM_TIMER_STATS]; |
| used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu " |
| "d: %6li us data: 0x%08lX" |
| "\n", |
| t->name, |
| (unsigned long)t->tv_set.tv_sec, |
| (unsigned long)t->tv_set.tv_usec, |
| (unsigned long)t->tv_expires.tv_sec, |
| (unsigned long)t->tv_expires.tv_usec, |
| t->delay_us, |
| t->data |
| ); |
| } |
| used += sprintf(bigbuf + used, "\n"); |
| |
| num_to_show = (fast_timers_expired < NUM_TIMER_STATS ? fast_timers_expired: |
| NUM_TIMER_STATS); |
| used += sprintf(bigbuf + used, "Timers expired: %i\n", fast_timers_expired); |
| for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE); i++) |
| { |
| t = &timer_expired_log[(fast_timers_expired - i - 1) % NUM_TIMER_STATS]; |
| used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu " |
| "d: %6li us data: 0x%08lX" |
| "\n", |
| t->name, |
| (unsigned long)t->tv_set.tv_sec, |
| (unsigned long)t->tv_set.tv_usec, |
| (unsigned long)t->tv_expires.tv_sec, |
| (unsigned long)t->tv_expires.tv_usec, |
| t->delay_us, |
| t->data |
| ); |
| } |
| used += sprintf(bigbuf + used, "\n"); |
| #endif |
| |
| used += sprintf(bigbuf + used, "Active timers:\n"); |
| local_irq_save(flags); |
| t = fast_timer_list; |
| while (t != NULL && (used+100 < BIG_BUF_SIZE)) |
| { |
| nextt = t->next; |
| local_irq_restore(flags); |
| used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu " |
| "d: %6li us data: 0x%08lX" |
| /* " func: 0x%08lX" */ |
| "\n", |
| t->name, |
| (unsigned long)t->tv_set.tv_sec, |
| (unsigned long)t->tv_set.tv_usec, |
| (unsigned long)t->tv_expires.tv_sec, |
| (unsigned long)t->tv_expires.tv_usec, |
| t->delay_us, |
| t->data |
| /* , t->function */ |
| ); |
| local_irq_disable(); |
| if (t->next != nextt) |
| { |
| printk(KERN_WARNING "timer removed!\n"); |
| } |
| t = nextt; |
| } |
| local_irq_restore(flags); |
| } |
| |
| if (used - offset < len) |
| { |
| len = used - offset; |
| } |
| |
| memcpy(buf, bigbuf + offset, len); |
| *start = buf; |
| *eof = 1; |
| |
| return len; |
| } |
| #endif /* PROC_FS */ |
| |
| #ifdef FAST_TIMER_TEST |
| static volatile unsigned long i = 0; |
| static volatile int num_test_timeout = 0; |
| static struct fast_timer tr[10]; |
| static int exp_num[10]; |
| |
| static struct timeval tv_exp[100]; |
| |
| static void test_timeout(unsigned long data) |
| { |
| do_gettimeofday_fast(&tv_exp[data]); |
| exp_num[data] = num_test_timeout; |
| |
| num_test_timeout++; |
| } |
| |
| static void test_timeout1(unsigned long data) |
| { |
| do_gettimeofday_fast(&tv_exp[data]); |
| exp_num[data] = num_test_timeout; |
| if (data < 7) |
| { |
| start_one_shot_timer(&tr[i], test_timeout1, i, 1000, "timeout1"); |
| i++; |
| } |
| num_test_timeout++; |
| } |
| |
| DP( |
| static char buf0[2000]; |
| static char buf1[2000]; |
| static char buf2[2000]; |
| static char buf3[2000]; |
| static char buf4[2000]; |
| ); |
| |
| static char buf5[6000]; |
| static int j_u[1000]; |
| |
| static void fast_timer_test(void) |
| { |
| int prev_num; |
| int j; |
| |
| struct timeval tv, tv0, tv1, tv2; |
| |
| printk("fast_timer_test() start\n"); |
| do_gettimeofday_fast(&tv); |
| |
| for (j = 0; j < 1000; j++) |
| { |
| j_u[j] = GET_JIFFIES_USEC(); |
| } |
| for (j = 0; j < 100; j++) |
| { |
| do_gettimeofday_fast(&tv_exp[j]); |
| } |
| printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec); |
| |
| for (j = 0; j < 1000; j++) |
| { |
| printk("%i %i %i %i %i\n",j_u[j], j_u[j+1], j_u[j+2], j_u[j+3], j_u[j+4]); |
| j += 4; |
| } |
| for (j = 0; j < 100; j++) |
| { |
| printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n", |
| tv_exp[j].tv_sec,tv_exp[j].tv_usec, |
| tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec, |
| tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec, |
| tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec, |
| tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec); |
| j += 4; |
| } |
| do_gettimeofday_fast(&tv0); |
| start_one_shot_timer(&tr[i], test_timeout, i, 50000, "test0"); |
| DP(proc_fasttimer_read(buf0, NULL, 0, 0, 0)); |
| i++; |
| start_one_shot_timer(&tr[i], test_timeout, i, 70000, "test1"); |
| DP(proc_fasttimer_read(buf1, NULL, 0, 0, 0)); |
| i++; |
| start_one_shot_timer(&tr[i], test_timeout, i, 40000, "test2"); |
| DP(proc_fasttimer_read(buf2, NULL, 0, 0, 0)); |
| i++; |
| start_one_shot_timer(&tr[i], test_timeout, i, 60000, "test3"); |
| DP(proc_fasttimer_read(buf3, NULL, 0, 0, 0)); |
| i++; |
| start_one_shot_timer(&tr[i], test_timeout1, i, 55000, "test4xx"); |
| DP(proc_fasttimer_read(buf4, NULL, 0, 0, 0)); |
| i++; |
| do_gettimeofday_fast(&tv1); |
| |
| proc_fasttimer_read(buf5, NULL, 0, 0, 0); |
| |
| prev_num = num_test_timeout; |
| while (num_test_timeout < i) |
| { |
| if (num_test_timeout != prev_num) |
| { |
| prev_num = num_test_timeout; |
| } |
| } |
| do_gettimeofday_fast(&tv2); |
| printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec); |
| printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec); |
| printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec); |
| DP(printk("buf0:\n"); |
| printk(buf0); |
| printk("buf1:\n"); |
| printk(buf1); |
| printk("buf2:\n"); |
| printk(buf2); |
| printk("buf3:\n"); |
| printk(buf3); |
| printk("buf4:\n"); |
| printk(buf4); |
| ); |
| printk("buf5:\n"); |
| printk(buf5); |
| |
| printk("timers set:\n"); |
| for(j = 0; j<i; j++) |
| { |
| struct fast_timer *t = &tr[j]; |
| printk("%-10s set: %6is %06ius exp: %6is %06ius " |
| "data: 0x%08X func: 0x%08X\n", |
| t->name, |
| t->tv_set.tv_sec, |
| t->tv_set.tv_usec, |
| t->tv_expires.tv_sec, |
| t->tv_expires.tv_usec, |
| t->data, |
| t->function |
| ); |
| |
| printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n", |
| t->delay_us, |
| tv_exp[j].tv_sec, |
| tv_exp[j].tv_usec, |
| exp_num[j], |
| (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); |
| } |
| proc_fasttimer_read(buf5, NULL, 0, 0, 0); |
| printk("buf5 after all done:\n"); |
| printk(buf5); |
| printk("fast_timer_test() done\n"); |
| } |
| #endif |
| |
| |
| void fast_timer_init(void) |
| { |
| /* For some reason, request_irq() hangs when called froom time_init() */ |
| if (!fast_timer_is_init) |
| { |
| #if 0 && defined(FAST_TIMER_TEST) |
| int i; |
| #endif |
| |
| printk(KERN_INFO "fast_timer_init()\n"); |
| |
| #if 0 && defined(FAST_TIMER_TEST) |
| for (i = 0; i <= TIMER0_DIV; i++) |
| { |
| /* We must be careful not to get overflow... */ |
| printk("%3i %6u\n", i, timer0_value_us[i]); |
| } |
| #endif |
| #ifdef CONFIG_PROC_FS |
| if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 ))) |
| fasttimer_proc_entry->read_proc = proc_fasttimer_read; |
| #endif /* PROC_FS */ |
| if(request_irq(TIMER1_IRQ_NBR, timer1_handler, 0, |
| "fast timer int", NULL)) |
| { |
| printk("err: timer1 irq\n"); |
| } |
| fast_timer_is_init = 1; |
| #ifdef FAST_TIMER_TEST |
| printk("do test\n"); |
| fast_timer_test(); |
| #endif |
| } |
| } |