| |
| #ifdef CONFIG_SCHEDSTATS |
| |
| /* |
| * Expects runqueue lock to be held for atomicity of update |
| */ |
| static inline void |
| rq_sched_info_arrive(struct rq *rq, unsigned long long delta) |
| { |
| if (rq) { |
| rq->rq_sched_info.run_delay += delta; |
| rq->rq_sched_info.pcount++; |
| } |
| } |
| |
| /* |
| * Expects runqueue lock to be held for atomicity of update |
| */ |
| static inline void |
| rq_sched_info_depart(struct rq *rq, unsigned long long delta) |
| { |
| if (rq) |
| rq->rq_cpu_time += delta; |
| } |
| |
| static inline void |
| rq_sched_info_dequeued(struct rq *rq, unsigned long long delta) |
| { |
| if (rq) |
| rq->rq_sched_info.run_delay += delta; |
| } |
| # define schedstat_inc(rq, field) do { (rq)->field++; } while (0) |
| # define schedstat_add(rq, field, amt) do { (rq)->field += (amt); } while (0) |
| # define schedstat_set(var, val) do { var = (val); } while (0) |
| #else /* !CONFIG_SCHEDSTATS */ |
| static inline void |
| rq_sched_info_arrive(struct rq *rq, unsigned long long delta) |
| {} |
| static inline void |
| rq_sched_info_dequeued(struct rq *rq, unsigned long long delta) |
| {} |
| static inline void |
| rq_sched_info_depart(struct rq *rq, unsigned long long delta) |
| {} |
| # define schedstat_inc(rq, field) do { } while (0) |
| # define schedstat_add(rq, field, amt) do { } while (0) |
| # define schedstat_set(var, val) do { } while (0) |
| #endif |
| |
| #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) |
| static inline void sched_info_reset_dequeued(struct task_struct *t) |
| { |
| t->sched_info.last_queued = 0; |
| } |
| |
| /* |
| * We are interested in knowing how long it was from the *first* time a |
| * task was queued to the time that it finally hit a cpu, we call this routine |
| * from dequeue_task() to account for possible rq->clock skew across cpus. The |
| * delta taken on each cpu would annul the skew. |
| */ |
| static inline void sched_info_dequeued(struct task_struct *t) |
| { |
| unsigned long long now = task_rq(t)->clock, delta = 0; |
| |
| if (unlikely(sched_info_on())) |
| if (t->sched_info.last_queued) |
| delta = now - t->sched_info.last_queued; |
| sched_info_reset_dequeued(t); |
| t->sched_info.run_delay += delta; |
| |
| rq_sched_info_dequeued(task_rq(t), delta); |
| } |
| |
| /* |
| * Called when a task finally hits the cpu. We can now calculate how |
| * long it was waiting to run. We also note when it began so that we |
| * can keep stats on how long its timeslice is. |
| */ |
| static void sched_info_arrive(struct task_struct *t) |
| { |
| unsigned long long now = task_rq(t)->clock, delta = 0; |
| |
| if (t->sched_info.last_queued) |
| delta = now - t->sched_info.last_queued; |
| sched_info_reset_dequeued(t); |
| t->sched_info.run_delay += delta; |
| t->sched_info.last_arrival = now; |
| t->sched_info.pcount++; |
| |
| rq_sched_info_arrive(task_rq(t), delta); |
| } |
| |
| /* |
| * This function is only called from enqueue_task(), but also only updates |
| * the timestamp if it is already not set. It's assumed that |
| * sched_info_dequeued() will clear that stamp when appropriate. |
| */ |
| static inline void sched_info_queued(struct task_struct *t) |
| { |
| if (unlikely(sched_info_on())) |
| if (!t->sched_info.last_queued) |
| t->sched_info.last_queued = task_rq(t)->clock; |
| } |
| |
| /* |
| * Called when a process ceases being the active-running process, either |
| * voluntarily or involuntarily. Now we can calculate how long we ran. |
| * Also, if the process is still in the TASK_RUNNING state, call |
| * sched_info_queued() to mark that it has now again started waiting on |
| * the runqueue. |
| */ |
| static inline void sched_info_depart(struct task_struct *t) |
| { |
| unsigned long long delta = task_rq(t)->clock - |
| t->sched_info.last_arrival; |
| |
| rq_sched_info_depart(task_rq(t), delta); |
| |
| if (t->state == TASK_RUNNING) |
| sched_info_queued(t); |
| } |
| |
| /* |
| * Called when tasks are switched involuntarily due, typically, to expiring |
| * their time slice. (This may also be called when switching to or from |
| * the idle task.) We are only called when prev != next. |
| */ |
| static inline void |
| __sched_info_switch(struct task_struct *prev, struct task_struct *next) |
| { |
| struct rq *rq = task_rq(prev); |
| |
| /* |
| * prev now departs the cpu. It's not interesting to record |
| * stats about how efficient we were at scheduling the idle |
| * process, however. |
| */ |
| if (prev != rq->idle) |
| sched_info_depart(prev); |
| |
| if (next != rq->idle) |
| sched_info_arrive(next); |
| } |
| static inline void |
| sched_info_switch(struct task_struct *prev, struct task_struct *next) |
| { |
| if (unlikely(sched_info_on())) |
| __sched_info_switch(prev, next); |
| } |
| #else |
| #define sched_info_queued(t) do { } while (0) |
| #define sched_info_reset_dequeued(t) do { } while (0) |
| #define sched_info_dequeued(t) do { } while (0) |
| #define sched_info_switch(t, next) do { } while (0) |
| #endif /* CONFIG_SCHEDSTATS || CONFIG_TASK_DELAY_ACCT */ |
| |
| /* |
| * The following are functions that support scheduler-internal time accounting. |
| * These functions are generally called at the timer tick. None of this depends |
| * on CONFIG_SCHEDSTATS. |
| */ |
| |
| /** |
| * account_group_user_time - Maintain utime for a thread group. |
| * |
| * @tsk: Pointer to task structure. |
| * @cputime: Time value by which to increment the utime field of the |
| * thread_group_cputime structure. |
| * |
| * If thread group time is being maintained, get the structure for the |
| * running CPU and update the utime field there. |
| */ |
| static inline void account_group_user_time(struct task_struct *tsk, |
| cputime_t cputime) |
| { |
| struct thread_group_cputimer *cputimer = &tsk->signal->cputimer; |
| |
| if (!cputimer->running) |
| return; |
| |
| raw_spin_lock(&cputimer->lock); |
| cputimer->cputime.utime += cputime; |
| raw_spin_unlock(&cputimer->lock); |
| } |
| |
| /** |
| * account_group_system_time - Maintain stime for a thread group. |
| * |
| * @tsk: Pointer to task structure. |
| * @cputime: Time value by which to increment the stime field of the |
| * thread_group_cputime structure. |
| * |
| * If thread group time is being maintained, get the structure for the |
| * running CPU and update the stime field there. |
| */ |
| static inline void account_group_system_time(struct task_struct *tsk, |
| cputime_t cputime) |
| { |
| struct thread_group_cputimer *cputimer = &tsk->signal->cputimer; |
| |
| if (!cputimer->running) |
| return; |
| |
| raw_spin_lock(&cputimer->lock); |
| cputimer->cputime.stime += cputime; |
| raw_spin_unlock(&cputimer->lock); |
| } |
| |
| /** |
| * account_group_exec_runtime - Maintain exec runtime for a thread group. |
| * |
| * @tsk: Pointer to task structure. |
| * @ns: Time value by which to increment the sum_exec_runtime field |
| * of the thread_group_cputime structure. |
| * |
| * If thread group time is being maintained, get the structure for the |
| * running CPU and update the sum_exec_runtime field there. |
| */ |
| static inline void account_group_exec_runtime(struct task_struct *tsk, |
| unsigned long long ns) |
| { |
| struct thread_group_cputimer *cputimer = &tsk->signal->cputimer; |
| |
| if (!cputimer->running) |
| return; |
| |
| raw_spin_lock(&cputimer->lock); |
| cputimer->cputime.sum_exec_runtime += ns; |
| raw_spin_unlock(&cputimer->lock); |
| } |