| /* |
| * APIC driver for "bigsmp" xAPIC machines with more than 8 virtual CPUs. |
| * |
| * Drives the local APIC in "clustered mode". |
| */ |
| #include <linux/threads.h> |
| #include <linux/cpumask.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/dmi.h> |
| #include <linux/smp.h> |
| |
| #include <asm/apicdef.h> |
| #include <asm/fixmap.h> |
| #include <asm/mpspec.h> |
| #include <asm/apic.h> |
| #include <asm/ipi.h> |
| |
| static inline unsigned bigsmp_get_apic_id(unsigned long x) |
| { |
| return (x >> 24) & 0xFF; |
| } |
| |
| static inline int bigsmp_apic_id_registered(void) |
| { |
| return 1; |
| } |
| |
| static inline const cpumask_t *bigsmp_target_cpus(void) |
| { |
| #ifdef CONFIG_SMP |
| return &cpu_online_map; |
| #else |
| return &cpumask_of_cpu(0); |
| #endif |
| } |
| |
| static inline unsigned long |
| bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid) |
| { |
| return 0; |
| } |
| |
| static inline unsigned long bigsmp_check_apicid_present(int bit) |
| { |
| return 1; |
| } |
| |
| static inline unsigned long calculate_ldr(int cpu) |
| { |
| unsigned long val, id; |
| |
| val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; |
| id = per_cpu(x86_bios_cpu_apicid, cpu); |
| val |= SET_APIC_LOGICAL_ID(id); |
| |
| return val; |
| } |
| |
| /* |
| * Set up the logical destination ID. |
| * |
| * Intel recommends to set DFR, LDR and TPR before enabling |
| * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel |
| * document number 292116). So here it goes... |
| */ |
| static inline void bigsmp_init_apic_ldr(void) |
| { |
| unsigned long val; |
| int cpu = smp_processor_id(); |
| |
| apic_write(APIC_DFR, APIC_DFR_FLAT); |
| val = calculate_ldr(cpu); |
| apic_write(APIC_LDR, val); |
| } |
| |
| static inline void bigsmp_setup_apic_routing(void) |
| { |
| printk(KERN_INFO |
| "Enabling APIC mode: Physflat. Using %d I/O APICs\n", |
| nr_ioapics); |
| } |
| |
| static inline int bigsmp_apicid_to_node(int logical_apicid) |
| { |
| return apicid_2_node[hard_smp_processor_id()]; |
| } |
| |
| static inline int bigsmp_cpu_present_to_apicid(int mps_cpu) |
| { |
| if (mps_cpu < nr_cpu_ids) |
| return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu); |
| |
| return BAD_APICID; |
| } |
| |
| static inline physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid) |
| { |
| return physid_mask_of_physid(phys_apicid); |
| } |
| |
| /* Mapping from cpu number to logical apicid */ |
| static inline int bigsmp_cpu_to_logical_apicid(int cpu) |
| { |
| if (cpu >= nr_cpu_ids) |
| return BAD_APICID; |
| return cpu_physical_id(cpu); |
| } |
| |
| static inline physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map) |
| { |
| /* For clustered we don't have a good way to do this yet - hack */ |
| return physids_promote(0xFFL); |
| } |
| |
| static inline void bigsmp_setup_portio_remap(void) |
| { |
| } |
| |
| static inline int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid) |
| { |
| return 1; |
| } |
| |
| /* As we are using single CPU as destination, pick only one CPU here */ |
| static inline unsigned int bigsmp_cpu_mask_to_apicid(const cpumask_t *cpumask) |
| { |
| return bigsmp_cpu_to_logical_apicid(first_cpu(*cpumask)); |
| } |
| |
| static inline unsigned int |
| bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask, |
| const struct cpumask *andmask) |
| { |
| int cpu; |
| |
| /* |
| * We're using fixed IRQ delivery, can only return one phys APIC ID. |
| * May as well be the first. |
| */ |
| for_each_cpu_and(cpu, cpumask, andmask) { |
| if (cpumask_test_cpu(cpu, cpu_online_mask)) |
| break; |
| } |
| if (cpu < nr_cpu_ids) |
| return bigsmp_cpu_to_logical_apicid(cpu); |
| |
| return BAD_APICID; |
| } |
| |
| static inline int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb) |
| { |
| return cpuid_apic >> index_msb; |
| } |
| |
| static inline void bigsmp_send_IPI_mask(const struct cpumask *mask, int vector) |
| { |
| default_send_IPI_mask_sequence_phys(mask, vector); |
| } |
| |
| static inline void bigsmp_send_IPI_allbutself(int vector) |
| { |
| default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector); |
| } |
| |
| static inline void bigsmp_send_IPI_all(int vector) |
| { |
| bigsmp_send_IPI_mask(cpu_online_mask, vector); |
| } |
| |
| static int dmi_bigsmp; /* can be set by dmi scanners */ |
| |
| static int hp_ht_bigsmp(const struct dmi_system_id *d) |
| { |
| printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident); |
| dmi_bigsmp = 1; |
| |
| return 0; |
| } |
| |
| |
| static const struct dmi_system_id bigsmp_dmi_table[] = { |
| { hp_ht_bigsmp, "HP ProLiant DL760 G2", |
| { DMI_MATCH(DMI_BIOS_VENDOR, "HP"), |
| DMI_MATCH(DMI_BIOS_VERSION, "P44-"), |
| } |
| }, |
| |
| { hp_ht_bigsmp, "HP ProLiant DL740", |
| { DMI_MATCH(DMI_BIOS_VENDOR, "HP"), |
| DMI_MATCH(DMI_BIOS_VERSION, "P47-"), |
| } |
| }, |
| { } /* NULL entry stops DMI scanning */ |
| }; |
| |
| static void bigsmp_vector_allocation_domain(int cpu, cpumask_t *retmask) |
| { |
| cpus_clear(*retmask); |
| cpu_set(cpu, *retmask); |
| } |
| |
| static int probe_bigsmp(void) |
| { |
| if (def_to_bigsmp) |
| dmi_bigsmp = 1; |
| else |
| dmi_check_system(bigsmp_dmi_table); |
| |
| return dmi_bigsmp; |
| } |
| |
| struct apic apic_bigsmp = { |
| |
| .name = "bigsmp", |
| .probe = probe_bigsmp, |
| .acpi_madt_oem_check = NULL, |
| .apic_id_registered = bigsmp_apic_id_registered, |
| |
| .irq_delivery_mode = dest_Fixed, |
| /* phys delivery to target CPU: */ |
| .irq_dest_mode = 0, |
| |
| .target_cpus = bigsmp_target_cpus, |
| .disable_esr = 1, |
| .dest_logical = 0, |
| .check_apicid_used = bigsmp_check_apicid_used, |
| .check_apicid_present = bigsmp_check_apicid_present, |
| |
| .vector_allocation_domain = bigsmp_vector_allocation_domain, |
| .init_apic_ldr = bigsmp_init_apic_ldr, |
| |
| .ioapic_phys_id_map = bigsmp_ioapic_phys_id_map, |
| .setup_apic_routing = bigsmp_setup_apic_routing, |
| .multi_timer_check = NULL, |
| .apicid_to_node = bigsmp_apicid_to_node, |
| .cpu_to_logical_apicid = bigsmp_cpu_to_logical_apicid, |
| .cpu_present_to_apicid = bigsmp_cpu_present_to_apicid, |
| .apicid_to_cpu_present = bigsmp_apicid_to_cpu_present, |
| .setup_portio_remap = NULL, |
| .check_phys_apicid_present = bigsmp_check_phys_apicid_present, |
| .enable_apic_mode = NULL, |
| .phys_pkg_id = bigsmp_phys_pkg_id, |
| .mps_oem_check = NULL, |
| |
| .get_apic_id = bigsmp_get_apic_id, |
| .set_apic_id = NULL, |
| .apic_id_mask = 0xFF << 24, |
| |
| .cpu_mask_to_apicid = bigsmp_cpu_mask_to_apicid, |
| .cpu_mask_to_apicid_and = bigsmp_cpu_mask_to_apicid_and, |
| |
| .send_IPI_mask = bigsmp_send_IPI_mask, |
| .send_IPI_mask_allbutself = NULL, |
| .send_IPI_allbutself = bigsmp_send_IPI_allbutself, |
| .send_IPI_all = bigsmp_send_IPI_all, |
| .send_IPI_self = default_send_IPI_self, |
| |
| .wakeup_cpu = NULL, |
| .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW, |
| .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, |
| |
| .wait_for_init_deassert = default_wait_for_init_deassert, |
| |
| .smp_callin_clear_local_apic = NULL, |
| .inquire_remote_apic = default_inquire_remote_apic, |
| |
| .read = native_apic_mem_read, |
| .write = native_apic_mem_write, |
| .icr_read = native_apic_icr_read, |
| .icr_write = native_apic_icr_write, |
| .wait_icr_idle = native_apic_wait_icr_idle, |
| .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, |
| }; |