| /* Signal support for 32-bit kernel builds |
| * |
| * Copyright (C) 2001 Matthew Wilcox <willy at parisc-linux.org> |
| * Copyright (C) 2006 Kyle McMartin <kyle at parisc-linux.org> |
| * |
| * Code was mostly borrowed from kernel/signal.c. |
| * See kernel/signal.c for additional Copyrights. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/compat.h> |
| #include <linux/module.h> |
| #include <linux/unistd.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/syscalls.h> |
| #include <linux/types.h> |
| #include <linux/errno.h> |
| |
| #include <asm/uaccess.h> |
| |
| #include "signal32.h" |
| #include "sys32.h" |
| |
| #define DEBUG_COMPAT_SIG 0 |
| #define DEBUG_COMPAT_SIG_LEVEL 2 |
| |
| #if DEBUG_COMPAT_SIG |
| #define DBG(LEVEL, ...) \ |
| ((DEBUG_COMPAT_SIG_LEVEL >= LEVEL) \ |
| ? printk(__VA_ARGS__) : (void) 0) |
| #else |
| #define DBG(LEVEL, ...) |
| #endif |
| |
| inline void |
| sigset_32to64(sigset_t *s64, compat_sigset_t *s32) |
| { |
| s64->sig[0] = s32->sig[0] | ((unsigned long)s32->sig[1] << 32); |
| } |
| |
| inline void |
| sigset_64to32(compat_sigset_t *s32, sigset_t *s64) |
| { |
| s32->sig[0] = s64->sig[0] & 0xffffffffUL; |
| s32->sig[1] = (s64->sig[0] >> 32) & 0xffffffffUL; |
| } |
| |
| long |
| restore_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __user * rf, |
| struct pt_regs *regs) |
| { |
| long err = 0; |
| compat_uint_t compat_reg; |
| compat_uint_t compat_regt; |
| int regn; |
| |
| /* When loading 32-bit values into 64-bit registers make |
| sure to clear the upper 32-bits */ |
| DBG(2,"restore_sigcontext32: PER_LINUX32 process\n"); |
| DBG(2,"restore_sigcontext32: sc = 0x%p, rf = 0x%p, regs = 0x%p\n", sc, rf, regs); |
| DBG(2,"restore_sigcontext32: compat_sigcontext is %#lx bytes\n", sizeof(*sc)); |
| for(regn=0; regn < 32; regn++){ |
| err |= __get_user(compat_reg,&sc->sc_gr[regn]); |
| regs->gr[regn] = compat_reg; |
| /* Load upper half */ |
| err |= __get_user(compat_regt,&rf->rf_gr[regn]); |
| regs->gr[regn] = ((u64)compat_regt << 32) | (u64)compat_reg; |
| DBG(3,"restore_sigcontext32: gr%02d = %#lx (%#x / %#x)\n", |
| regn, regs->gr[regn], compat_regt, compat_reg); |
| } |
| DBG(2,"restore_sigcontext32: sc->sc_fr = 0x%p (%#lx)\n",sc->sc_fr, sizeof(sc->sc_fr)); |
| /* XXX: BE WARNED FR's are 64-BIT! */ |
| err |= __copy_from_user(regs->fr, sc->sc_fr, sizeof(regs->fr)); |
| |
| /* Better safe than sorry, pass __get_user two things of |
| the same size and let gcc do the upward conversion to |
| 64-bits */ |
| err |= __get_user(compat_reg, &sc->sc_iaoq[0]); |
| /* Load upper half */ |
| err |= __get_user(compat_regt, &rf->rf_iaoq[0]); |
| regs->iaoq[0] = ((u64)compat_regt << 32) | (u64)compat_reg; |
| DBG(2,"restore_sigcontext32: upper half of iaoq[0] = %#lx\n", compat_regt); |
| DBG(2,"restore_sigcontext32: sc->sc_iaoq[0] = %p => %#x\n", |
| &sc->sc_iaoq[0], compat_reg); |
| |
| err |= __get_user(compat_reg, &sc->sc_iaoq[1]); |
| /* Load upper half */ |
| err |= __get_user(compat_regt, &rf->rf_iaoq[1]); |
| regs->iaoq[1] = ((u64)compat_regt << 32) | (u64)compat_reg; |
| DBG(2,"restore_sigcontext32: upper half of iaoq[1] = %#lx\n", compat_regt); |
| DBG(2,"restore_sigcontext32: sc->sc_iaoq[1] = %p => %#x\n", |
| &sc->sc_iaoq[1],compat_reg); |
| DBG(2,"restore_sigcontext32: iaoq is %#lx / %#lx\n", |
| regs->iaoq[0],regs->iaoq[1]); |
| |
| err |= __get_user(compat_reg, &sc->sc_iasq[0]); |
| /* Load the upper half for iasq */ |
| err |= __get_user(compat_regt, &rf->rf_iasq[0]); |
| regs->iasq[0] = ((u64)compat_regt << 32) | (u64)compat_reg; |
| DBG(2,"restore_sigcontext32: upper half of iasq[0] = %#lx\n", compat_regt); |
| |
| err |= __get_user(compat_reg, &sc->sc_iasq[1]); |
| /* Load the upper half for iasq */ |
| err |= __get_user(compat_regt, &rf->rf_iasq[1]); |
| regs->iasq[1] = ((u64)compat_regt << 32) | (u64)compat_reg; |
| DBG(2,"restore_sigcontext32: upper half of iasq[1] = %#lx\n", compat_regt); |
| DBG(2,"restore_sigcontext32: iasq is %#lx / %#lx\n", |
| regs->iasq[0],regs->iasq[1]); |
| |
| err |= __get_user(compat_reg, &sc->sc_sar); |
| /* Load the upper half for sar */ |
| err |= __get_user(compat_regt, &rf->rf_sar); |
| regs->sar = ((u64)compat_regt << 32) | (u64)compat_reg; |
| DBG(2,"restore_sigcontext32: upper_half & sar = %#lx\n", compat_regt); |
| DBG(2,"restore_sigcontext32: sar is %#lx\n", regs->sar); |
| DBG(2,"restore_sigcontext32: r28 is %ld\n", regs->gr[28]); |
| |
| return err; |
| } |
| |
| /* |
| * Set up the sigcontext structure for this process. |
| * This is not an easy task if the kernel is 64-bit, it will require |
| * that we examine the process personality to determine if we need to |
| * truncate for a 32-bit userspace. |
| */ |
| long |
| setup_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __user * rf, |
| struct pt_regs *regs, int in_syscall) |
| { |
| compat_int_t flags = 0; |
| long err = 0; |
| compat_uint_t compat_reg; |
| compat_uint_t compat_regb; |
| int regn; |
| |
| if (on_sig_stack((unsigned long) sc)) |
| flags |= PARISC_SC_FLAG_ONSTACK; |
| |
| if (in_syscall) { |
| |
| DBG(1,"setup_sigcontext32: in_syscall\n"); |
| |
| flags |= PARISC_SC_FLAG_IN_SYSCALL; |
| /* Truncate gr31 */ |
| compat_reg = (compat_uint_t)(regs->gr[31]); |
| /* regs->iaoq is undefined in the syscall return path */ |
| err |= __put_user(compat_reg, &sc->sc_iaoq[0]); |
| DBG(2,"setup_sigcontext32: sc->sc_iaoq[0] = %p <= %#x\n", |
| &sc->sc_iaoq[0], compat_reg); |
| |
| /* Store upper half */ |
| compat_reg = (compat_uint_t)(regs->gr[31] >> 32); |
| err |= __put_user(compat_reg, &rf->rf_iaoq[0]); |
| DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg); |
| |
| |
| compat_reg = (compat_uint_t)(regs->gr[31]+4); |
| err |= __put_user(compat_reg, &sc->sc_iaoq[1]); |
| DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n", |
| &sc->sc_iaoq[1], compat_reg); |
| /* Store upper half */ |
| compat_reg = (compat_uint_t)((regs->gr[31]+4) >> 32); |
| err |= __put_user(compat_reg, &rf->rf_iaoq[1]); |
| DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg); |
| |
| /* Truncate sr3 */ |
| compat_reg = (compat_uint_t)(regs->sr[3]); |
| err |= __put_user(compat_reg, &sc->sc_iasq[0]); |
| err |= __put_user(compat_reg, &sc->sc_iasq[1]); |
| |
| /* Store upper half */ |
| compat_reg = (compat_uint_t)(regs->sr[3] >> 32); |
| err |= __put_user(compat_reg, &rf->rf_iasq[0]); |
| err |= __put_user(compat_reg, &rf->rf_iasq[1]); |
| |
| DBG(2,"setup_sigcontext32: upper half iasq[0] = %#x\n", compat_reg); |
| DBG(2,"setup_sigcontext32: upper half iasq[1] = %#x\n", compat_reg); |
| DBG(1,"setup_sigcontext32: iaoq %#lx / %#lx\n", |
| regs->gr[31], regs->gr[31]+4); |
| |
| } else { |
| |
| compat_reg = (compat_uint_t)(regs->iaoq[0]); |
| err |= __put_user(compat_reg, &sc->sc_iaoq[0]); |
| DBG(2,"setup_sigcontext32: sc->sc_iaoq[0] = %p <= %#x\n", |
| &sc->sc_iaoq[0], compat_reg); |
| /* Store upper half */ |
| compat_reg = (compat_uint_t)(regs->iaoq[0] >> 32); |
| err |= __put_user(compat_reg, &rf->rf_iaoq[0]); |
| DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg); |
| |
| compat_reg = (compat_uint_t)(regs->iaoq[1]); |
| err |= __put_user(compat_reg, &sc->sc_iaoq[1]); |
| DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n", |
| &sc->sc_iaoq[1], compat_reg); |
| /* Store upper half */ |
| compat_reg = (compat_uint_t)(regs->iaoq[1] >> 32); |
| err |= __put_user(compat_reg, &rf->rf_iaoq[1]); |
| DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg); |
| |
| |
| compat_reg = (compat_uint_t)(regs->iasq[0]); |
| err |= __put_user(compat_reg, &sc->sc_iasq[0]); |
| DBG(2,"setup_sigcontext32: sc->sc_iasq[0] = %p <= %#x\n", |
| &sc->sc_iasq[0], compat_reg); |
| /* Store upper half */ |
| compat_reg = (compat_uint_t)(regs->iasq[0] >> 32); |
| err |= __put_user(compat_reg, &rf->rf_iasq[0]); |
| DBG(2,"setup_sigcontext32: upper half iasq[0] = %#x\n", compat_reg); |
| |
| |
| compat_reg = (compat_uint_t)(regs->iasq[1]); |
| err |= __put_user(compat_reg, &sc->sc_iasq[1]); |
| DBG(2,"setup_sigcontext32: sc->sc_iasq[1] = %p <= %#x\n", |
| &sc->sc_iasq[1], compat_reg); |
| /* Store upper half */ |
| compat_reg = (compat_uint_t)(regs->iasq[1] >> 32); |
| err |= __put_user(compat_reg, &rf->rf_iasq[1]); |
| DBG(2,"setup_sigcontext32: upper half iasq[1] = %#x\n", compat_reg); |
| |
| /* Print out the IAOQ for debugging */ |
| DBG(1,"setup_sigcontext32: ia0q %#lx / %#lx\n", |
| regs->iaoq[0], regs->iaoq[1]); |
| } |
| |
| err |= __put_user(flags, &sc->sc_flags); |
| |
| DBG(1,"setup_sigcontext32: Truncating general registers.\n"); |
| |
| for(regn=0; regn < 32; regn++){ |
| /* Truncate a general register */ |
| compat_reg = (compat_uint_t)(regs->gr[regn]); |
| err |= __put_user(compat_reg, &sc->sc_gr[regn]); |
| /* Store upper half */ |
| compat_regb = (compat_uint_t)(regs->gr[regn] >> 32); |
| err |= __put_user(compat_regb, &rf->rf_gr[regn]); |
| |
| /* DEBUG: Write out the "upper / lower" register data */ |
| DBG(2,"setup_sigcontext32: gr%02d = %#x / %#x\n", regn, |
| compat_regb, compat_reg); |
| } |
| |
| /* Copy the floating point registers (same size) |
| XXX: BE WARNED FR's are 64-BIT! */ |
| DBG(1,"setup_sigcontext32: Copying from regs to sc, " |
| "sc->sc_fr size = %#lx, regs->fr size = %#lx\n", |
| sizeof(regs->fr), sizeof(sc->sc_fr)); |
| err |= __copy_to_user(sc->sc_fr, regs->fr, sizeof(regs->fr)); |
| |
| compat_reg = (compat_uint_t)(regs->sar); |
| err |= __put_user(compat_reg, &sc->sc_sar); |
| DBG(2,"setup_sigcontext32: sar is %#x\n", compat_reg); |
| /* Store upper half */ |
| compat_reg = (compat_uint_t)(regs->sar >> 32); |
| err |= __put_user(compat_reg, &rf->rf_sar); |
| DBG(2,"setup_sigcontext32: upper half sar = %#x\n", compat_reg); |
| DBG(1,"setup_sigcontext32: r28 is %ld\n", regs->gr[28]); |
| |
| return err; |
| } |
| |
| int |
| copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from) |
| { |
| compat_uptr_t addr; |
| int err; |
| |
| if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t))) |
| return -EFAULT; |
| |
| err = __get_user(to->si_signo, &from->si_signo); |
| err |= __get_user(to->si_errno, &from->si_errno); |
| err |= __get_user(to->si_code, &from->si_code); |
| |
| if (to->si_code < 0) |
| err |= __copy_from_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE); |
| else { |
| switch (to->si_code >> 16) { |
| case __SI_CHLD >> 16: |
| err |= __get_user(to->si_utime, &from->si_utime); |
| err |= __get_user(to->si_stime, &from->si_stime); |
| err |= __get_user(to->si_status, &from->si_status); |
| default: |
| err |= __get_user(to->si_pid, &from->si_pid); |
| err |= __get_user(to->si_uid, &from->si_uid); |
| break; |
| case __SI_FAULT >> 16: |
| err |= __get_user(addr, &from->si_addr); |
| to->si_addr = compat_ptr(addr); |
| break; |
| case __SI_POLL >> 16: |
| err |= __get_user(to->si_band, &from->si_band); |
| err |= __get_user(to->si_fd, &from->si_fd); |
| break; |
| case __SI_RT >> 16: /* This is not generated by the kernel as of now. */ |
| case __SI_MESGQ >> 16: |
| err |= __get_user(to->si_pid, &from->si_pid); |
| err |= __get_user(to->si_uid, &from->si_uid); |
| err |= __get_user(to->si_int, &from->si_int); |
| break; |
| } |
| } |
| return err; |
| } |
| |
| int |
| copy_siginfo_to_user32 (compat_siginfo_t __user *to, siginfo_t *from) |
| { |
| compat_uptr_t addr; |
| compat_int_t val; |
| int err; |
| |
| if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t))) |
| return -EFAULT; |
| |
| /* If you change siginfo_t structure, please be sure |
| this code is fixed accordingly. |
| It should never copy any pad contained in the structure |
| to avoid security leaks, but must copy the generic |
| 3 ints plus the relevant union member. |
| This routine must convert siginfo from 64bit to 32bit as well |
| at the same time. */ |
| err = __put_user(from->si_signo, &to->si_signo); |
| err |= __put_user(from->si_errno, &to->si_errno); |
| err |= __put_user((short)from->si_code, &to->si_code); |
| if (from->si_code < 0) |
| err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE); |
| else { |
| switch (from->si_code >> 16) { |
| case __SI_CHLD >> 16: |
| err |= __put_user(from->si_utime, &to->si_utime); |
| err |= __put_user(from->si_stime, &to->si_stime); |
| err |= __put_user(from->si_status, &to->si_status); |
| default: |
| err |= __put_user(from->si_pid, &to->si_pid); |
| err |= __put_user(from->si_uid, &to->si_uid); |
| break; |
| case __SI_FAULT >> 16: |
| addr = ptr_to_compat(from->si_addr); |
| err |= __put_user(addr, &to->si_addr); |
| break; |
| case __SI_POLL >> 16: |
| err |= __put_user(from->si_band, &to->si_band); |
| err |= __put_user(from->si_fd, &to->si_fd); |
| break; |
| case __SI_TIMER >> 16: |
| err |= __put_user(from->si_tid, &to->si_tid); |
| err |= __put_user(from->si_overrun, &to->si_overrun); |
| val = (compat_int_t)from->si_int; |
| err |= __put_user(val, &to->si_int); |
| break; |
| case __SI_RT >> 16: /* Not generated by the kernel as of now. */ |
| case __SI_MESGQ >> 16: |
| err |= __put_user(from->si_uid, &to->si_uid); |
| err |= __put_user(from->si_pid, &to->si_pid); |
| val = (compat_int_t)from->si_int; |
| err |= __put_user(val, &to->si_int); |
| break; |
| } |
| } |
| return err; |
| } |