| #include <linux/init.h> |
| #include <linux/suspend.h> |
| #include <linux/io.h> |
| #include <asm/time.h> |
| #include <asm/cacheflush.h> |
| #include <asm/mpc52xx.h> |
| |
| /* these are defined in mpc52xx_sleep.S, and only used here */ |
| extern void mpc52xx_deep_sleep(void __iomem *sram, void __iomem *sdram_regs, |
| struct mpc52xx_cdm __iomem *, struct mpc52xx_intr __iomem*); |
| extern void mpc52xx_ds_sram(void); |
| extern const long mpc52xx_ds_sram_size; |
| extern void mpc52xx_ds_cached(void); |
| extern const long mpc52xx_ds_cached_size; |
| |
| static void __iomem *mbar; |
| static void __iomem *sdram; |
| static struct mpc52xx_cdm __iomem *cdm; |
| static struct mpc52xx_intr __iomem *intr; |
| static struct mpc52xx_gpio_wkup __iomem *gpiow; |
| static void __iomem *sram; |
| static int sram_size; |
| |
| struct mpc52xx_suspend mpc52xx_suspend; |
| |
| static int mpc52xx_pm_valid(suspend_state_t state) |
| { |
| switch (state) { |
| case PM_SUSPEND_STANDBY: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| int mpc52xx_set_wakeup_gpio(u8 pin, u8 level) |
| { |
| u16 tmp; |
| |
| /* enable gpio */ |
| out_8(&gpiow->wkup_gpioe, in_8(&gpiow->wkup_gpioe) | (1 << pin)); |
| /* set as input */ |
| out_8(&gpiow->wkup_ddr, in_8(&gpiow->wkup_ddr) & ~(1 << pin)); |
| /* enable deep sleep interrupt */ |
| out_8(&gpiow->wkup_inten, in_8(&gpiow->wkup_inten) | (1 << pin)); |
| /* low/high level creates wakeup interrupt */ |
| tmp = in_be16(&gpiow->wkup_itype); |
| tmp &= ~(0x3 << (pin * 2)); |
| tmp |= (!level + 1) << (pin * 2); |
| out_be16(&gpiow->wkup_itype, tmp); |
| /* master enable */ |
| out_8(&gpiow->wkup_maste, 1); |
| |
| return 0; |
| } |
| |
| int mpc52xx_pm_prepare(void) |
| { |
| struct device_node *np; |
| const struct of_device_id immr_ids[] = { |
| { .compatible = "fsl,mpc5200-immr", }, |
| { .compatible = "fsl,mpc5200b-immr", }, |
| { .type = "soc", .compatible = "mpc5200", }, /* lite5200 */ |
| { .type = "builtin", .compatible = "mpc5200", }, /* efika */ |
| {} |
| }; |
| struct resource res; |
| |
| /* map the whole register space */ |
| np = of_find_matching_node(NULL, immr_ids); |
| |
| if (of_address_to_resource(np, 0, &res)) { |
| pr_err("mpc52xx_pm_prepare(): could not get IMMR address\n"); |
| of_node_put(np); |
| return -ENOSYS; |
| } |
| |
| mbar = ioremap(res.start, 0xc000); /* we should map whole region including SRAM */ |
| |
| of_node_put(np); |
| if (!mbar) { |
| pr_err("mpc52xx_pm_prepare(): could not map registers\n"); |
| return -ENOSYS; |
| } |
| /* these offsets are from mpc5200 users manual */ |
| sdram = mbar + 0x100; |
| cdm = mbar + 0x200; |
| intr = mbar + 0x500; |
| gpiow = mbar + 0xc00; |
| sram = mbar + 0x8000; /* Those will be handled by the */ |
| sram_size = 0x4000; /* bestcomm driver soon */ |
| |
| /* call board suspend code, if applicable */ |
| if (mpc52xx_suspend.board_suspend_prepare) |
| mpc52xx_suspend.board_suspend_prepare(mbar); |
| else { |
| printk(KERN_ALERT "%s: %i don't know how to wake up the board\n", |
| __func__, __LINE__); |
| goto out_unmap; |
| } |
| |
| return 0; |
| |
| out_unmap: |
| iounmap(mbar); |
| return -ENOSYS; |
| } |
| |
| |
| char saved_sram[0x4000]; |
| |
| int mpc52xx_pm_enter(suspend_state_t state) |
| { |
| u32 clk_enables; |
| u32 msr, hid0; |
| u32 intr_main_mask; |
| void __iomem * irq_0x500 = (void __iomem *)CONFIG_KERNEL_START + 0x500; |
| unsigned long irq_0x500_stop = (unsigned long)irq_0x500 + mpc52xx_ds_cached_size; |
| char saved_0x500[mpc52xx_ds_cached_size]; |
| |
| /* disable all interrupts in PIC */ |
| intr_main_mask = in_be32(&intr->main_mask); |
| out_be32(&intr->main_mask, intr_main_mask | 0x1ffff); |
| |
| /* don't let DEC expire any time soon */ |
| mtspr(SPRN_DEC, 0x7fffffff); |
| |
| /* save SRAM */ |
| memcpy(saved_sram, sram, sram_size); |
| |
| /* copy low level suspend code to sram */ |
| memcpy(sram, mpc52xx_ds_sram, mpc52xx_ds_sram_size); |
| |
| out_8(&cdm->ccs_sleep_enable, 1); |
| out_8(&cdm->osc_sleep_enable, 1); |
| out_8(&cdm->ccs_qreq_test, 1); |
| |
| /* disable all but SDRAM and bestcomm (SRAM) clocks */ |
| clk_enables = in_be32(&cdm->clk_enables); |
| out_be32(&cdm->clk_enables, clk_enables & 0x00088000); |
| |
| /* disable power management */ |
| msr = mfmsr(); |
| mtmsr(msr & ~MSR_POW); |
| |
| /* enable sleep mode, disable others */ |
| hid0 = mfspr(SPRN_HID0); |
| mtspr(SPRN_HID0, (hid0 & ~(HID0_DOZE | HID0_NAP | HID0_DPM)) | HID0_SLEEP); |
| |
| /* save original, copy our irq handler, flush from dcache and invalidate icache */ |
| memcpy(saved_0x500, irq_0x500, mpc52xx_ds_cached_size); |
| memcpy(irq_0x500, mpc52xx_ds_cached, mpc52xx_ds_cached_size); |
| flush_icache_range((unsigned long)irq_0x500, irq_0x500_stop); |
| |
| /* call low-level sleep code */ |
| mpc52xx_deep_sleep(sram, sdram, cdm, intr); |
| |
| /* restore original irq handler */ |
| memcpy(irq_0x500, saved_0x500, mpc52xx_ds_cached_size); |
| flush_icache_range((unsigned long)irq_0x500, irq_0x500_stop); |
| |
| /* restore old power mode */ |
| mtmsr(msr & ~MSR_POW); |
| mtspr(SPRN_HID0, hid0); |
| mtmsr(msr); |
| |
| out_be32(&cdm->clk_enables, clk_enables); |
| out_8(&cdm->ccs_sleep_enable, 0); |
| out_8(&cdm->osc_sleep_enable, 0); |
| |
| /* restore SRAM */ |
| memcpy(sram, saved_sram, sram_size); |
| |
| /* restart jiffies */ |
| wakeup_decrementer(); |
| |
| /* reenable interrupts in PIC */ |
| out_be32(&intr->main_mask, intr_main_mask); |
| |
| return 0; |
| } |
| |
| void mpc52xx_pm_finish(void) |
| { |
| /* call board resume code */ |
| if (mpc52xx_suspend.board_resume_finish) |
| mpc52xx_suspend.board_resume_finish(mbar); |
| |
| iounmap(mbar); |
| } |
| |
| static struct platform_suspend_ops mpc52xx_pm_ops = { |
| .valid = mpc52xx_pm_valid, |
| .prepare = mpc52xx_pm_prepare, |
| .enter = mpc52xx_pm_enter, |
| .finish = mpc52xx_pm_finish, |
| }; |
| |
| int __init mpc52xx_pm_init(void) |
| { |
| suspend_set_ops(&mpc52xx_pm_ops); |
| return 0; |
| } |