| /* |
| * V4L2 Driver for i.MX27/i.MX25 camera host |
| * |
| * Copyright (C) 2008, Sascha Hauer, Pengutronix |
| * Copyright (C) 2010, Baruch Siach, Orex Computed Radiography |
| * Copyright (C) 2012, Javier Martin, Vista Silicon S.L. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/errno.h> |
| #include <linux/fs.h> |
| #include <linux/gcd.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/math64.h> |
| #include <linux/mm.h> |
| #include <linux/moduleparam.h> |
| #include <linux/time.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/mutex.h> |
| #include <linux/clk.h> |
| |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-dev.h> |
| #include <media/videobuf2-core.h> |
| #include <media/videobuf2-dma-contig.h> |
| #include <media/soc_camera.h> |
| #include <media/soc_mediabus.h> |
| |
| #include <linux/videodev2.h> |
| |
| #include <mach/mx2_cam.h> |
| #include <mach/hardware.h> |
| |
| #include <asm/dma.h> |
| |
| #define MX2_CAM_DRV_NAME "mx2-camera" |
| #define MX2_CAM_VERSION "0.0.6" |
| #define MX2_CAM_DRIVER_DESCRIPTION "i.MX2x_Camera" |
| |
| /* reset values */ |
| #define CSICR1_RESET_VAL 0x40000800 |
| #define CSICR2_RESET_VAL 0x0 |
| #define CSICR3_RESET_VAL 0x0 |
| |
| /* csi control reg 1 */ |
| #define CSICR1_SWAP16_EN (1 << 31) |
| #define CSICR1_EXT_VSYNC (1 << 30) |
| #define CSICR1_EOF_INTEN (1 << 29) |
| #define CSICR1_PRP_IF_EN (1 << 28) |
| #define CSICR1_CCIR_MODE (1 << 27) |
| #define CSICR1_COF_INTEN (1 << 26) |
| #define CSICR1_SF_OR_INTEN (1 << 25) |
| #define CSICR1_RF_OR_INTEN (1 << 24) |
| #define CSICR1_STATFF_LEVEL (3 << 22) |
| #define CSICR1_STATFF_INTEN (1 << 21) |
| #define CSICR1_RXFF_LEVEL(l) (((l) & 3) << 19) /* MX27 */ |
| #define CSICR1_FB2_DMA_INTEN (1 << 20) /* MX25 */ |
| #define CSICR1_FB1_DMA_INTEN (1 << 19) /* MX25 */ |
| #define CSICR1_RXFF_INTEN (1 << 18) |
| #define CSICR1_SOF_POL (1 << 17) |
| #define CSICR1_SOF_INTEN (1 << 16) |
| #define CSICR1_MCLKDIV(d) (((d) & 0xF) << 12) |
| #define CSICR1_HSYNC_POL (1 << 11) |
| #define CSICR1_CCIR_EN (1 << 10) |
| #define CSICR1_MCLKEN (1 << 9) |
| #define CSICR1_FCC (1 << 8) |
| #define CSICR1_PACK_DIR (1 << 7) |
| #define CSICR1_CLR_STATFIFO (1 << 6) |
| #define CSICR1_CLR_RXFIFO (1 << 5) |
| #define CSICR1_GCLK_MODE (1 << 4) |
| #define CSICR1_INV_DATA (1 << 3) |
| #define CSICR1_INV_PCLK (1 << 2) |
| #define CSICR1_REDGE (1 << 1) |
| #define CSICR1_FMT_MASK (CSICR1_PACK_DIR | CSICR1_SWAP16_EN) |
| |
| #define SHIFT_STATFF_LEVEL 22 |
| #define SHIFT_RXFF_LEVEL 19 |
| #define SHIFT_MCLKDIV 12 |
| |
| /* control reg 3 */ |
| #define CSICR3_FRMCNT (0xFFFF << 16) |
| #define CSICR3_FRMCNT_RST (1 << 15) |
| #define CSICR3_DMA_REFLASH_RFF (1 << 14) |
| #define CSICR3_DMA_REFLASH_SFF (1 << 13) |
| #define CSICR3_DMA_REQ_EN_RFF (1 << 12) |
| #define CSICR3_DMA_REQ_EN_SFF (1 << 11) |
| #define CSICR3_RXFF_LEVEL(l) (((l) & 7) << 4) /* MX25 */ |
| #define CSICR3_CSI_SUP (1 << 3) |
| #define CSICR3_ZERO_PACK_EN (1 << 2) |
| #define CSICR3_ECC_INT_EN (1 << 1) |
| #define CSICR3_ECC_AUTO_EN (1 << 0) |
| |
| #define SHIFT_FRMCNT 16 |
| |
| /* csi status reg */ |
| #define CSISR_SFF_OR_INT (1 << 25) |
| #define CSISR_RFF_OR_INT (1 << 24) |
| #define CSISR_STATFF_INT (1 << 21) |
| #define CSISR_DMA_TSF_FB2_INT (1 << 20) /* MX25 */ |
| #define CSISR_DMA_TSF_FB1_INT (1 << 19) /* MX25 */ |
| #define CSISR_RXFF_INT (1 << 18) |
| #define CSISR_EOF_INT (1 << 17) |
| #define CSISR_SOF_INT (1 << 16) |
| #define CSISR_F2_INT (1 << 15) |
| #define CSISR_F1_INT (1 << 14) |
| #define CSISR_COF_INT (1 << 13) |
| #define CSISR_ECC_INT (1 << 1) |
| #define CSISR_DRDY (1 << 0) |
| |
| #define CSICR1 0x00 |
| #define CSICR2 0x04 |
| #define CSISR (cpu_is_mx27() ? 0x08 : 0x18) |
| #define CSISTATFIFO 0x0c |
| #define CSIRFIFO 0x10 |
| #define CSIRXCNT 0x14 |
| #define CSICR3 (cpu_is_mx27() ? 0x1C : 0x08) |
| #define CSIDMASA_STATFIFO 0x20 |
| #define CSIDMATA_STATFIFO 0x24 |
| #define CSIDMASA_FB1 0x28 |
| #define CSIDMASA_FB2 0x2c |
| #define CSIFBUF_PARA 0x30 |
| #define CSIIMAG_PARA 0x34 |
| |
| /* EMMA PrP */ |
| #define PRP_CNTL 0x00 |
| #define PRP_INTR_CNTL 0x04 |
| #define PRP_INTRSTATUS 0x08 |
| #define PRP_SOURCE_Y_PTR 0x0c |
| #define PRP_SOURCE_CB_PTR 0x10 |
| #define PRP_SOURCE_CR_PTR 0x14 |
| #define PRP_DEST_RGB1_PTR 0x18 |
| #define PRP_DEST_RGB2_PTR 0x1c |
| #define PRP_DEST_Y_PTR 0x20 |
| #define PRP_DEST_CB_PTR 0x24 |
| #define PRP_DEST_CR_PTR 0x28 |
| #define PRP_SRC_FRAME_SIZE 0x2c |
| #define PRP_DEST_CH1_LINE_STRIDE 0x30 |
| #define PRP_SRC_PIXEL_FORMAT_CNTL 0x34 |
| #define PRP_CH1_PIXEL_FORMAT_CNTL 0x38 |
| #define PRP_CH1_OUT_IMAGE_SIZE 0x3c |
| #define PRP_CH2_OUT_IMAGE_SIZE 0x40 |
| #define PRP_SRC_LINE_STRIDE 0x44 |
| #define PRP_CSC_COEF_012 0x48 |
| #define PRP_CSC_COEF_345 0x4c |
| #define PRP_CSC_COEF_678 0x50 |
| #define PRP_CH1_RZ_HORI_COEF1 0x54 |
| #define PRP_CH1_RZ_HORI_COEF2 0x58 |
| #define PRP_CH1_RZ_HORI_VALID 0x5c |
| #define PRP_CH1_RZ_VERT_COEF1 0x60 |
| #define PRP_CH1_RZ_VERT_COEF2 0x64 |
| #define PRP_CH1_RZ_VERT_VALID 0x68 |
| #define PRP_CH2_RZ_HORI_COEF1 0x6c |
| #define PRP_CH2_RZ_HORI_COEF2 0x70 |
| #define PRP_CH2_RZ_HORI_VALID 0x74 |
| #define PRP_CH2_RZ_VERT_COEF1 0x78 |
| #define PRP_CH2_RZ_VERT_COEF2 0x7c |
| #define PRP_CH2_RZ_VERT_VALID 0x80 |
| |
| #define PRP_CNTL_CH1EN (1 << 0) |
| #define PRP_CNTL_CH2EN (1 << 1) |
| #define PRP_CNTL_CSIEN (1 << 2) |
| #define PRP_CNTL_DATA_IN_YUV420 (0 << 3) |
| #define PRP_CNTL_DATA_IN_YUV422 (1 << 3) |
| #define PRP_CNTL_DATA_IN_RGB16 (2 << 3) |
| #define PRP_CNTL_DATA_IN_RGB32 (3 << 3) |
| #define PRP_CNTL_CH1_OUT_RGB8 (0 << 5) |
| #define PRP_CNTL_CH1_OUT_RGB16 (1 << 5) |
| #define PRP_CNTL_CH1_OUT_RGB32 (2 << 5) |
| #define PRP_CNTL_CH1_OUT_YUV422 (3 << 5) |
| #define PRP_CNTL_CH2_OUT_YUV420 (0 << 7) |
| #define PRP_CNTL_CH2_OUT_YUV422 (1 << 7) |
| #define PRP_CNTL_CH2_OUT_YUV444 (2 << 7) |
| #define PRP_CNTL_CH1_LEN (1 << 9) |
| #define PRP_CNTL_CH2_LEN (1 << 10) |
| #define PRP_CNTL_SKIP_FRAME (1 << 11) |
| #define PRP_CNTL_SWRST (1 << 12) |
| #define PRP_CNTL_CLKEN (1 << 13) |
| #define PRP_CNTL_WEN (1 << 14) |
| #define PRP_CNTL_CH1BYP (1 << 15) |
| #define PRP_CNTL_IN_TSKIP(x) ((x) << 16) |
| #define PRP_CNTL_CH1_TSKIP(x) ((x) << 19) |
| #define PRP_CNTL_CH2_TSKIP(x) ((x) << 22) |
| #define PRP_CNTL_INPUT_FIFO_LEVEL(x) ((x) << 25) |
| #define PRP_CNTL_RZ_FIFO_LEVEL(x) ((x) << 27) |
| #define PRP_CNTL_CH2B1EN (1 << 29) |
| #define PRP_CNTL_CH2B2EN (1 << 30) |
| #define PRP_CNTL_CH2FEN (1 << 31) |
| |
| /* IRQ Enable and status register */ |
| #define PRP_INTR_RDERR (1 << 0) |
| #define PRP_INTR_CH1WERR (1 << 1) |
| #define PRP_INTR_CH2WERR (1 << 2) |
| #define PRP_INTR_CH1FC (1 << 3) |
| #define PRP_INTR_CH2FC (1 << 5) |
| #define PRP_INTR_LBOVF (1 << 7) |
| #define PRP_INTR_CH2OVF (1 << 8) |
| |
| /* Resizing registers */ |
| #define PRP_RZ_VALID_TBL_LEN(x) ((x) << 24) |
| #define PRP_RZ_VALID_BILINEAR (1 << 31) |
| |
| #define MAX_VIDEO_MEM 16 |
| |
| #define RESIZE_NUM_MIN 1 |
| #define RESIZE_NUM_MAX 20 |
| #define BC_COEF 3 |
| #define SZ_COEF (1 << BC_COEF) |
| |
| #define RESIZE_DIR_H 0 |
| #define RESIZE_DIR_V 1 |
| |
| #define RESIZE_ALGO_BILINEAR 0 |
| #define RESIZE_ALGO_AVERAGING 1 |
| |
| struct mx2_prp_cfg { |
| int channel; |
| u32 in_fmt; |
| u32 out_fmt; |
| u32 src_pixel; |
| u32 ch1_pixel; |
| u32 irq_flags; |
| u32 csicr1; |
| }; |
| |
| /* prp resizing parameters */ |
| struct emma_prp_resize { |
| int algo; /* type of algorithm used */ |
| int len; /* number of coefficients */ |
| unsigned char s[RESIZE_NUM_MAX]; /* table of coefficients */ |
| }; |
| |
| /* prp configuration for a client-host fmt pair */ |
| struct mx2_fmt_cfg { |
| enum v4l2_mbus_pixelcode in_fmt; |
| u32 out_fmt; |
| struct mx2_prp_cfg cfg; |
| }; |
| |
| enum mx2_buffer_state { |
| MX2_STATE_QUEUED, |
| MX2_STATE_ACTIVE, |
| MX2_STATE_DONE, |
| }; |
| |
| struct mx2_buf_internal { |
| struct list_head queue; |
| int bufnum; |
| bool discard; |
| }; |
| |
| /* buffer for one video frame */ |
| struct mx2_buffer { |
| /* common v4l buffer stuff -- must be first */ |
| struct vb2_buffer vb; |
| enum mx2_buffer_state state; |
| struct mx2_buf_internal internal; |
| }; |
| |
| struct mx2_camera_dev { |
| struct device *dev; |
| struct soc_camera_host soc_host; |
| struct soc_camera_device *icd; |
| struct clk *clk_csi, *clk_emma; |
| |
| unsigned int irq_csi, irq_emma; |
| void __iomem *base_csi, *base_emma; |
| unsigned long base_dma; |
| |
| struct mx2_camera_platform_data *pdata; |
| struct resource *res_csi, *res_emma; |
| unsigned long platform_flags; |
| |
| struct list_head capture; |
| struct list_head active_bufs; |
| struct list_head discard; |
| |
| spinlock_t lock; |
| |
| int dma; |
| struct mx2_buffer *active; |
| struct mx2_buffer *fb1_active; |
| struct mx2_buffer *fb2_active; |
| |
| u32 csicr1; |
| |
| struct mx2_buf_internal buf_discard[2]; |
| void *discard_buffer; |
| dma_addr_t discard_buffer_dma; |
| size_t discard_size; |
| struct mx2_fmt_cfg *emma_prp; |
| struct emma_prp_resize resizing[2]; |
| unsigned int s_width, s_height; |
| u32 frame_count; |
| struct vb2_alloc_ctx *alloc_ctx; |
| }; |
| |
| static struct mx2_buffer *mx2_ibuf_to_buf(struct mx2_buf_internal *int_buf) |
| { |
| return container_of(int_buf, struct mx2_buffer, internal); |
| } |
| |
| static struct mx2_fmt_cfg mx27_emma_prp_table[] = { |
| /* |
| * This is a generic configuration which is valid for most |
| * prp input-output format combinations. |
| * We set the incomming and outgoing pixelformat to a |
| * 16 Bit wide format and adjust the bytesperline |
| * accordingly. With this configuration the inputdata |
| * will not be changed by the emma and could be any type |
| * of 16 Bit Pixelformat. |
| */ |
| { |
| .in_fmt = 0, |
| .out_fmt = 0, |
| .cfg = { |
| .channel = 1, |
| .in_fmt = PRP_CNTL_DATA_IN_RGB16, |
| .out_fmt = PRP_CNTL_CH1_OUT_RGB16, |
| .src_pixel = 0x2ca00565, /* RGB565 */ |
| .ch1_pixel = 0x2ca00565, /* RGB565 */ |
| .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR | |
| PRP_INTR_CH1FC | PRP_INTR_LBOVF, |
| .csicr1 = 0, |
| } |
| }, |
| { |
| .in_fmt = V4L2_MBUS_FMT_YUYV8_2X8, |
| .out_fmt = V4L2_PIX_FMT_YUV420, |
| .cfg = { |
| .channel = 2, |
| .in_fmt = PRP_CNTL_DATA_IN_YUV422, |
| .out_fmt = PRP_CNTL_CH2_OUT_YUV420, |
| .src_pixel = 0x22000888, /* YUV422 (YUYV) */ |
| .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR | |
| PRP_INTR_CH2FC | PRP_INTR_LBOVF | |
| PRP_INTR_CH2OVF, |
| .csicr1 = CSICR1_PACK_DIR, |
| } |
| }, |
| { |
| .in_fmt = V4L2_MBUS_FMT_UYVY8_2X8, |
| .out_fmt = V4L2_PIX_FMT_YUV420, |
| .cfg = { |
| .channel = 2, |
| .in_fmt = PRP_CNTL_DATA_IN_YUV422, |
| .out_fmt = PRP_CNTL_CH2_OUT_YUV420, |
| .src_pixel = 0x22000888, /* YUV422 (YUYV) */ |
| .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR | |
| PRP_INTR_CH2FC | PRP_INTR_LBOVF | |
| PRP_INTR_CH2OVF, |
| .csicr1 = CSICR1_SWAP16_EN, |
| } |
| }, |
| }; |
| |
| static struct mx2_fmt_cfg *mx27_emma_prp_get_format( |
| enum v4l2_mbus_pixelcode in_fmt, |
| u32 out_fmt) |
| { |
| int i; |
| |
| for (i = 1; i < ARRAY_SIZE(mx27_emma_prp_table); i++) |
| if ((mx27_emma_prp_table[i].in_fmt == in_fmt) && |
| (mx27_emma_prp_table[i].out_fmt == out_fmt)) { |
| return &mx27_emma_prp_table[i]; |
| } |
| /* If no match return the most generic configuration */ |
| return &mx27_emma_prp_table[0]; |
| }; |
| |
| static void mx27_update_emma_buf(struct mx2_camera_dev *pcdev, |
| unsigned long phys, int bufnum) |
| { |
| struct mx2_fmt_cfg *prp = pcdev->emma_prp; |
| |
| if (prp->cfg.channel == 1) { |
| writel(phys, pcdev->base_emma + |
| PRP_DEST_RGB1_PTR + 4 * bufnum); |
| } else { |
| writel(phys, pcdev->base_emma + |
| PRP_DEST_Y_PTR - 0x14 * bufnum); |
| if (prp->out_fmt == V4L2_PIX_FMT_YUV420) { |
| u32 imgsize = pcdev->icd->user_height * |
| pcdev->icd->user_width; |
| |
| writel(phys + imgsize, pcdev->base_emma + |
| PRP_DEST_CB_PTR - 0x14 * bufnum); |
| writel(phys + ((5 * imgsize) / 4), pcdev->base_emma + |
| PRP_DEST_CR_PTR - 0x14 * bufnum); |
| } |
| } |
| } |
| |
| static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev) |
| { |
| unsigned long flags; |
| |
| clk_disable(pcdev->clk_csi); |
| writel(0, pcdev->base_csi + CSICR1); |
| if (cpu_is_mx27()) { |
| writel(0, pcdev->base_emma + PRP_CNTL); |
| } else if (cpu_is_mx25()) { |
| spin_lock_irqsave(&pcdev->lock, flags); |
| pcdev->fb1_active = NULL; |
| pcdev->fb2_active = NULL; |
| writel(0, pcdev->base_csi + CSIDMASA_FB1); |
| writel(0, pcdev->base_csi + CSIDMASA_FB2); |
| spin_unlock_irqrestore(&pcdev->lock, flags); |
| } |
| } |
| |
| /* |
| * The following two functions absolutely depend on the fact, that |
| * there can be only one camera on mx2 camera sensor interface |
| */ |
| static int mx2_camera_add_device(struct soc_camera_device *icd) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct mx2_camera_dev *pcdev = ici->priv; |
| int ret; |
| u32 csicr1; |
| |
| if (pcdev->icd) |
| return -EBUSY; |
| |
| ret = clk_enable(pcdev->clk_csi); |
| if (ret < 0) |
| return ret; |
| |
| csicr1 = CSICR1_MCLKEN; |
| |
| if (cpu_is_mx27()) { |
| csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC | |
| CSICR1_RXFF_LEVEL(0); |
| } else if (cpu_is_mx27()) |
| csicr1 |= CSICR1_SOF_INTEN | CSICR1_RXFF_LEVEL(2); |
| |
| pcdev->csicr1 = csicr1; |
| writel(pcdev->csicr1, pcdev->base_csi + CSICR1); |
| |
| pcdev->icd = icd; |
| pcdev->frame_count = 0; |
| |
| dev_info(icd->parent, "Camera driver attached to camera %d\n", |
| icd->devnum); |
| |
| return 0; |
| } |
| |
| static void mx2_camera_remove_device(struct soc_camera_device *icd) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct mx2_camera_dev *pcdev = ici->priv; |
| |
| BUG_ON(icd != pcdev->icd); |
| |
| dev_info(icd->parent, "Camera driver detached from camera %d\n", |
| icd->devnum); |
| |
| mx2_camera_deactivate(pcdev); |
| |
| pcdev->icd = NULL; |
| } |
| |
| static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb, |
| int state) |
| { |
| struct vb2_buffer *vb; |
| struct mx2_buffer *buf; |
| struct mx2_buffer **fb_active = fb == 1 ? &pcdev->fb1_active : |
| &pcdev->fb2_active; |
| u32 fb_reg = fb == 1 ? CSIDMASA_FB1 : CSIDMASA_FB2; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pcdev->lock, flags); |
| |
| if (*fb_active == NULL) |
| goto out; |
| |
| vb = &(*fb_active)->vb; |
| dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%p %lu\n", __func__, |
| vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); |
| |
| do_gettimeofday(&vb->v4l2_buf.timestamp); |
| vb->v4l2_buf.sequence++; |
| vb2_buffer_done(vb, VB2_BUF_STATE_DONE); |
| |
| if (list_empty(&pcdev->capture)) { |
| buf = NULL; |
| writel(0, pcdev->base_csi + fb_reg); |
| } else { |
| buf = list_first_entry(&pcdev->capture, struct mx2_buffer, |
| internal.queue); |
| vb = &buf->vb; |
| list_del(&buf->internal.queue); |
| buf->state = MX2_STATE_ACTIVE; |
| writel(vb2_dma_contig_plane_dma_addr(vb, 0), |
| pcdev->base_csi + fb_reg); |
| } |
| |
| *fb_active = buf; |
| |
| out: |
| spin_unlock_irqrestore(&pcdev->lock, flags); |
| } |
| |
| static irqreturn_t mx25_camera_irq(int irq_csi, void *data) |
| { |
| struct mx2_camera_dev *pcdev = data; |
| u32 status = readl(pcdev->base_csi + CSISR); |
| |
| if (status & CSISR_DMA_TSF_FB1_INT) |
| mx25_camera_frame_done(pcdev, 1, MX2_STATE_DONE); |
| else if (status & CSISR_DMA_TSF_FB2_INT) |
| mx25_camera_frame_done(pcdev, 2, MX2_STATE_DONE); |
| |
| /* FIXME: handle CSISR_RFF_OR_INT */ |
| |
| writel(status, pcdev->base_csi + CSISR); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Videobuf operations |
| */ |
| static int mx2_videobuf_setup(struct vb2_queue *vq, |
| const struct v4l2_format *fmt, |
| unsigned int *count, unsigned int *num_planes, |
| unsigned int sizes[], void *alloc_ctxs[]) |
| { |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vq); |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct mx2_camera_dev *pcdev = ici->priv; |
| |
| dev_dbg(icd->parent, "count=%d, size=%d\n", *count, sizes[0]); |
| |
| /* TODO: support for VIDIOC_CREATE_BUFS not ready */ |
| if (fmt != NULL) |
| return -ENOTTY; |
| |
| alloc_ctxs[0] = pcdev->alloc_ctx; |
| |
| sizes[0] = icd->sizeimage; |
| |
| if (0 == *count) |
| *count = 32; |
| if (!*num_planes && |
| sizes[0] * *count > MAX_VIDEO_MEM * 1024 * 1024) |
| *count = (MAX_VIDEO_MEM * 1024 * 1024) / sizes[0]; |
| |
| *num_planes = 1; |
| |
| return 0; |
| } |
| |
| static int mx2_videobuf_prepare(struct vb2_buffer *vb) |
| { |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); |
| int ret = 0; |
| |
| dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, |
| vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); |
| |
| #ifdef DEBUG |
| /* |
| * This can be useful if you want to see if we actually fill |
| * the buffer with something |
| */ |
| memset((void *)vb2_plane_vaddr(vb, 0), |
| 0xaa, vb2_get_plane_payload(vb, 0)); |
| #endif |
| |
| vb2_set_plane_payload(vb, 0, icd->sizeimage); |
| if (vb2_plane_vaddr(vb, 0) && |
| vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| return 0; |
| |
| out: |
| return ret; |
| } |
| |
| static void mx2_videobuf_queue(struct vb2_buffer *vb) |
| { |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); |
| struct soc_camera_host *ici = |
| to_soc_camera_host(icd->parent); |
| struct mx2_camera_dev *pcdev = ici->priv; |
| struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); |
| unsigned long flags; |
| |
| dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, |
| vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); |
| |
| spin_lock_irqsave(&pcdev->lock, flags); |
| |
| buf->state = MX2_STATE_QUEUED; |
| list_add_tail(&buf->internal.queue, &pcdev->capture); |
| |
| if (cpu_is_mx25()) { |
| u32 csicr3, dma_inten = 0; |
| |
| if (pcdev->fb1_active == NULL) { |
| writel(vb2_dma_contig_plane_dma_addr(vb, 0), |
| pcdev->base_csi + CSIDMASA_FB1); |
| pcdev->fb1_active = buf; |
| dma_inten = CSICR1_FB1_DMA_INTEN; |
| } else if (pcdev->fb2_active == NULL) { |
| writel(vb2_dma_contig_plane_dma_addr(vb, 0), |
| pcdev->base_csi + CSIDMASA_FB2); |
| pcdev->fb2_active = buf; |
| dma_inten = CSICR1_FB2_DMA_INTEN; |
| } |
| |
| if (dma_inten) { |
| list_del(&buf->internal.queue); |
| buf->state = MX2_STATE_ACTIVE; |
| |
| csicr3 = readl(pcdev->base_csi + CSICR3); |
| |
| /* Reflash DMA */ |
| writel(csicr3 | CSICR3_DMA_REFLASH_RFF, |
| pcdev->base_csi + CSICR3); |
| |
| /* clear & enable interrupts */ |
| writel(dma_inten, pcdev->base_csi + CSISR); |
| pcdev->csicr1 |= dma_inten; |
| writel(pcdev->csicr1, pcdev->base_csi + CSICR1); |
| |
| /* enable DMA */ |
| csicr3 |= CSICR3_DMA_REQ_EN_RFF | CSICR3_RXFF_LEVEL(1); |
| writel(csicr3, pcdev->base_csi + CSICR3); |
| } |
| } |
| |
| spin_unlock_irqrestore(&pcdev->lock, flags); |
| } |
| |
| static void mx2_videobuf_release(struct vb2_buffer *vb) |
| { |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct mx2_camera_dev *pcdev = ici->priv; |
| struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); |
| unsigned long flags; |
| |
| #ifdef DEBUG |
| dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, |
| vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); |
| |
| switch (buf->state) { |
| case MX2_STATE_ACTIVE: |
| dev_info(icd->parent, "%s (active)\n", __func__); |
| break; |
| case MX2_STATE_QUEUED: |
| dev_info(icd->parent, "%s (queued)\n", __func__); |
| break; |
| default: |
| dev_info(icd->parent, "%s (unknown) %d\n", __func__, |
| buf->state); |
| break; |
| } |
| #endif |
| |
| /* |
| * Terminate only queued but inactive buffers. Active buffers are |
| * released when they become inactive after videobuf_waiton(). |
| * |
| * FIXME: implement forced termination of active buffers for mx27 and |
| * mx27 eMMA, so that the user won't get stuck in an uninterruptible |
| * state. This requires a specific handling for each of the these DMA |
| * types. |
| */ |
| |
| spin_lock_irqsave(&pcdev->lock, flags); |
| if (cpu_is_mx25() && buf->state == MX2_STATE_ACTIVE) { |
| if (pcdev->fb1_active == buf) { |
| pcdev->csicr1 &= ~CSICR1_FB1_DMA_INTEN; |
| writel(0, pcdev->base_csi + CSIDMASA_FB1); |
| pcdev->fb1_active = NULL; |
| } else if (pcdev->fb2_active == buf) { |
| pcdev->csicr1 &= ~CSICR1_FB2_DMA_INTEN; |
| writel(0, pcdev->base_csi + CSIDMASA_FB2); |
| pcdev->fb2_active = NULL; |
| } |
| writel(pcdev->csicr1, pcdev->base_csi + CSICR1); |
| } |
| spin_unlock_irqrestore(&pcdev->lock, flags); |
| } |
| |
| static void mx27_camera_emma_buf_init(struct soc_camera_device *icd, |
| int bytesperline) |
| { |
| struct soc_camera_host *ici = |
| to_soc_camera_host(icd->parent); |
| struct mx2_camera_dev *pcdev = ici->priv; |
| struct mx2_fmt_cfg *prp = pcdev->emma_prp; |
| |
| writel((pcdev->s_width << 16) | pcdev->s_height, |
| pcdev->base_emma + PRP_SRC_FRAME_SIZE); |
| writel(prp->cfg.src_pixel, |
| pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL); |
| if (prp->cfg.channel == 1) { |
| writel((icd->user_width << 16) | icd->user_height, |
| pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE); |
| writel(bytesperline, |
| pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE); |
| writel(prp->cfg.ch1_pixel, |
| pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL); |
| } else { /* channel 2 */ |
| writel((icd->user_width << 16) | icd->user_height, |
| pcdev->base_emma + PRP_CH2_OUT_IMAGE_SIZE); |
| } |
| |
| /* Enable interrupts */ |
| writel(prp->cfg.irq_flags, pcdev->base_emma + PRP_INTR_CNTL); |
| } |
| |
| static void mx2_prp_resize_commit(struct mx2_camera_dev *pcdev) |
| { |
| int dir; |
| |
| for (dir = RESIZE_DIR_H; dir <= RESIZE_DIR_V; dir++) { |
| unsigned char *s = pcdev->resizing[dir].s; |
| int len = pcdev->resizing[dir].len; |
| unsigned int coeff[2] = {0, 0}; |
| unsigned int valid = 0; |
| int i; |
| |
| if (len == 0) |
| continue; |
| |
| for (i = RESIZE_NUM_MAX - 1; i >= 0; i--) { |
| int j; |
| |
| j = i > 9 ? 1 : 0; |
| coeff[j] = (coeff[j] << BC_COEF) | |
| (s[i] & (SZ_COEF - 1)); |
| |
| if (i == 5 || i == 15) |
| coeff[j] <<= 1; |
| |
| valid = (valid << 1) | (s[i] >> BC_COEF); |
| } |
| |
| valid |= PRP_RZ_VALID_TBL_LEN(len); |
| |
| if (pcdev->resizing[dir].algo == RESIZE_ALGO_BILINEAR) |
| valid |= PRP_RZ_VALID_BILINEAR; |
| |
| if (pcdev->emma_prp->cfg.channel == 1) { |
| if (dir == RESIZE_DIR_H) { |
| writel(coeff[0], pcdev->base_emma + |
| PRP_CH1_RZ_HORI_COEF1); |
| writel(coeff[1], pcdev->base_emma + |
| PRP_CH1_RZ_HORI_COEF2); |
| writel(valid, pcdev->base_emma + |
| PRP_CH1_RZ_HORI_VALID); |
| } else { |
| writel(coeff[0], pcdev->base_emma + |
| PRP_CH1_RZ_VERT_COEF1); |
| writel(coeff[1], pcdev->base_emma + |
| PRP_CH1_RZ_VERT_COEF2); |
| writel(valid, pcdev->base_emma + |
| PRP_CH1_RZ_VERT_VALID); |
| } |
| } else { |
| if (dir == RESIZE_DIR_H) { |
| writel(coeff[0], pcdev->base_emma + |
| PRP_CH2_RZ_HORI_COEF1); |
| writel(coeff[1], pcdev->base_emma + |
| PRP_CH2_RZ_HORI_COEF2); |
| writel(valid, pcdev->base_emma + |
| PRP_CH2_RZ_HORI_VALID); |
| } else { |
| writel(coeff[0], pcdev->base_emma + |
| PRP_CH2_RZ_VERT_COEF1); |
| writel(coeff[1], pcdev->base_emma + |
| PRP_CH2_RZ_VERT_COEF2); |
| writel(valid, pcdev->base_emma + |
| PRP_CH2_RZ_VERT_VALID); |
| } |
| } |
| } |
| } |
| |
| static int mx2_start_streaming(struct vb2_queue *q, unsigned int count) |
| { |
| struct soc_camera_device *icd = soc_camera_from_vb2q(q); |
| struct soc_camera_host *ici = |
| to_soc_camera_host(icd->parent); |
| struct mx2_camera_dev *pcdev = ici->priv; |
| struct mx2_fmt_cfg *prp = pcdev->emma_prp; |
| struct vb2_buffer *vb; |
| struct mx2_buffer *buf; |
| unsigned long phys; |
| int bytesperline; |
| |
| if (cpu_is_mx27()) { |
| unsigned long flags; |
| if (count < 2) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&pcdev->lock, flags); |
| |
| buf = list_first_entry(&pcdev->capture, struct mx2_buffer, |
| internal.queue); |
| buf->internal.bufnum = 0; |
| vb = &buf->vb; |
| buf->state = MX2_STATE_ACTIVE; |
| |
| phys = vb2_dma_contig_plane_dma_addr(vb, 0); |
| mx27_update_emma_buf(pcdev, phys, buf->internal.bufnum); |
| list_move_tail(pcdev->capture.next, &pcdev->active_bufs); |
| |
| buf = list_first_entry(&pcdev->capture, struct mx2_buffer, |
| internal.queue); |
| buf->internal.bufnum = 1; |
| vb = &buf->vb; |
| buf->state = MX2_STATE_ACTIVE; |
| |
| phys = vb2_dma_contig_plane_dma_addr(vb, 0); |
| mx27_update_emma_buf(pcdev, phys, buf->internal.bufnum); |
| list_move_tail(pcdev->capture.next, &pcdev->active_bufs); |
| |
| bytesperline = soc_mbus_bytes_per_line(icd->user_width, |
| icd->current_fmt->host_fmt); |
| if (bytesperline < 0) |
| return bytesperline; |
| |
| /* |
| * I didn't manage to properly enable/disable the prp |
| * on a per frame basis during running transfers, |
| * thus we allocate a buffer here and use it to |
| * discard frames when no buffer is available. |
| * Feel free to work on this ;) |
| */ |
| pcdev->discard_size = icd->user_height * bytesperline; |
| pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev, |
| pcdev->discard_size, &pcdev->discard_buffer_dma, |
| GFP_KERNEL); |
| if (!pcdev->discard_buffer) |
| return -ENOMEM; |
| |
| pcdev->buf_discard[0].discard = true; |
| list_add_tail(&pcdev->buf_discard[0].queue, |
| &pcdev->discard); |
| |
| pcdev->buf_discard[1].discard = true; |
| list_add_tail(&pcdev->buf_discard[1].queue, |
| &pcdev->discard); |
| |
| mx2_prp_resize_commit(pcdev); |
| |
| mx27_camera_emma_buf_init(icd, bytesperline); |
| |
| if (prp->cfg.channel == 1) { |
| writel(PRP_CNTL_CH1EN | |
| PRP_CNTL_CSIEN | |
| prp->cfg.in_fmt | |
| prp->cfg.out_fmt | |
| PRP_CNTL_CH1_LEN | |
| PRP_CNTL_CH1BYP | |
| PRP_CNTL_CH1_TSKIP(0) | |
| PRP_CNTL_IN_TSKIP(0), |
| pcdev->base_emma + PRP_CNTL); |
| } else { |
| writel(PRP_CNTL_CH2EN | |
| PRP_CNTL_CSIEN | |
| prp->cfg.in_fmt | |
| prp->cfg.out_fmt | |
| PRP_CNTL_CH2_LEN | |
| PRP_CNTL_CH2_TSKIP(0) | |
| PRP_CNTL_IN_TSKIP(0), |
| pcdev->base_emma + PRP_CNTL); |
| } |
| spin_unlock_irqrestore(&pcdev->lock, flags); |
| } |
| |
| return 0; |
| } |
| |
| static int mx2_stop_streaming(struct vb2_queue *q) |
| { |
| struct soc_camera_device *icd = soc_camera_from_vb2q(q); |
| struct soc_camera_host *ici = |
| to_soc_camera_host(icd->parent); |
| struct mx2_camera_dev *pcdev = ici->priv; |
| struct mx2_fmt_cfg *prp = pcdev->emma_prp; |
| unsigned long flags; |
| void *b; |
| u32 cntl; |
| |
| if (cpu_is_mx27()) { |
| spin_lock_irqsave(&pcdev->lock, flags); |
| |
| cntl = readl(pcdev->base_emma + PRP_CNTL); |
| if (prp->cfg.channel == 1) { |
| writel(cntl & ~PRP_CNTL_CH1EN, |
| pcdev->base_emma + PRP_CNTL); |
| } else { |
| writel(cntl & ~PRP_CNTL_CH2EN, |
| pcdev->base_emma + PRP_CNTL); |
| } |
| INIT_LIST_HEAD(&pcdev->capture); |
| INIT_LIST_HEAD(&pcdev->active_bufs); |
| INIT_LIST_HEAD(&pcdev->discard); |
| |
| b = pcdev->discard_buffer; |
| pcdev->discard_buffer = NULL; |
| |
| spin_unlock_irqrestore(&pcdev->lock, flags); |
| |
| dma_free_coherent(ici->v4l2_dev.dev, |
| pcdev->discard_size, b, pcdev->discard_buffer_dma); |
| } |
| |
| return 0; |
| } |
| |
| static struct vb2_ops mx2_videobuf_ops = { |
| .queue_setup = mx2_videobuf_setup, |
| .buf_prepare = mx2_videobuf_prepare, |
| .buf_queue = mx2_videobuf_queue, |
| .buf_cleanup = mx2_videobuf_release, |
| .start_streaming = mx2_start_streaming, |
| .stop_streaming = mx2_stop_streaming, |
| }; |
| |
| static int mx2_camera_init_videobuf(struct vb2_queue *q, |
| struct soc_camera_device *icd) |
| { |
| q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| q->io_modes = VB2_MMAP | VB2_USERPTR; |
| q->drv_priv = icd; |
| q->ops = &mx2_videobuf_ops; |
| q->mem_ops = &vb2_dma_contig_memops; |
| q->buf_struct_size = sizeof(struct mx2_buffer); |
| |
| return vb2_queue_init(q); |
| } |
| |
| #define MX2_BUS_FLAGS (V4L2_MBUS_MASTER | \ |
| V4L2_MBUS_VSYNC_ACTIVE_HIGH | \ |
| V4L2_MBUS_VSYNC_ACTIVE_LOW | \ |
| V4L2_MBUS_HSYNC_ACTIVE_HIGH | \ |
| V4L2_MBUS_HSYNC_ACTIVE_LOW | \ |
| V4L2_MBUS_PCLK_SAMPLE_RISING | \ |
| V4L2_MBUS_PCLK_SAMPLE_FALLING | \ |
| V4L2_MBUS_DATA_ACTIVE_HIGH | \ |
| V4L2_MBUS_DATA_ACTIVE_LOW) |
| |
| static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev) |
| { |
| u32 cntl; |
| int count = 0; |
| |
| cntl = readl(pcdev->base_emma + PRP_CNTL); |
| writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL); |
| while (count++ < 100) { |
| if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST)) |
| return 0; |
| barrier(); |
| udelay(1); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int mx2_camera_set_bus_param(struct soc_camera_device *icd) |
| { |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct mx2_camera_dev *pcdev = ici->priv; |
| struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; |
| unsigned long common_flags; |
| int ret; |
| int bytesperline; |
| u32 csicr1 = pcdev->csicr1; |
| |
| ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg); |
| if (!ret) { |
| common_flags = soc_mbus_config_compatible(&cfg, MX2_BUS_FLAGS); |
| if (!common_flags) { |
| dev_warn(icd->parent, |
| "Flags incompatible: camera 0x%x, host 0x%x\n", |
| cfg.flags, MX2_BUS_FLAGS); |
| return -EINVAL; |
| } |
| } else if (ret != -ENOIOCTLCMD) { |
| return ret; |
| } else { |
| common_flags = MX2_BUS_FLAGS; |
| } |
| |
| if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) && |
| (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) { |
| if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH) |
| common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW; |
| else |
| common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH; |
| } |
| |
| if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) && |
| (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) { |
| if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING) |
| common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING; |
| else |
| common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING; |
| } |
| |
| cfg.flags = common_flags; |
| ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg); |
| if (ret < 0 && ret != -ENOIOCTLCMD) { |
| dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n", |
| common_flags, ret); |
| return ret; |
| } |
| |
| csicr1 = (csicr1 & ~CSICR1_FMT_MASK) | pcdev->emma_prp->cfg.csicr1; |
| |
| if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) |
| csicr1 |= CSICR1_REDGE; |
| if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) |
| csicr1 |= CSICR1_SOF_POL; |
| if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) |
| csicr1 |= CSICR1_HSYNC_POL; |
| if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC) |
| csicr1 |= CSICR1_EXT_VSYNC; |
| if (pcdev->platform_flags & MX2_CAMERA_CCIR) |
| csicr1 |= CSICR1_CCIR_EN; |
| if (pcdev->platform_flags & MX2_CAMERA_CCIR_INTERLACE) |
| csicr1 |= CSICR1_CCIR_MODE; |
| if (pcdev->platform_flags & MX2_CAMERA_GATED_CLOCK) |
| csicr1 |= CSICR1_GCLK_MODE; |
| if (pcdev->platform_flags & MX2_CAMERA_INV_DATA) |
| csicr1 |= CSICR1_INV_DATA; |
| |
| pcdev->csicr1 = csicr1; |
| |
| bytesperline = soc_mbus_bytes_per_line(icd->user_width, |
| icd->current_fmt->host_fmt); |
| if (bytesperline < 0) |
| return bytesperline; |
| |
| if (cpu_is_mx27()) { |
| ret = mx27_camera_emma_prp_reset(pcdev); |
| if (ret) |
| return ret; |
| } else if (cpu_is_mx25()) { |
| writel((bytesperline * icd->user_height) >> 2, |
| pcdev->base_csi + CSIRXCNT); |
| writel((bytesperline << 16) | icd->user_height, |
| pcdev->base_csi + CSIIMAG_PARA); |
| } |
| |
| writel(pcdev->csicr1, pcdev->base_csi + CSICR1); |
| |
| return 0; |
| } |
| |
| static int mx2_camera_set_crop(struct soc_camera_device *icd, |
| struct v4l2_crop *a) |
| { |
| struct v4l2_rect *rect = &a->c; |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| struct v4l2_mbus_framefmt mf; |
| int ret; |
| |
| soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096); |
| soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096); |
| |
| ret = v4l2_subdev_call(sd, video, s_crop, a); |
| if (ret < 0) |
| return ret; |
| |
| /* The capture device might have changed its output */ |
| ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); |
| if (ret < 0) |
| return ret; |
| |
| dev_dbg(icd->parent, "Sensor cropped %dx%d\n", |
| mf.width, mf.height); |
| |
| icd->user_width = mf.width; |
| icd->user_height = mf.height; |
| |
| return ret; |
| } |
| |
| static int mx2_camera_get_formats(struct soc_camera_device *icd, |
| unsigned int idx, |
| struct soc_camera_format_xlate *xlate) |
| { |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| const struct soc_mbus_pixelfmt *fmt; |
| struct device *dev = icd->parent; |
| enum v4l2_mbus_pixelcode code; |
| int ret, formats = 0; |
| |
| ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code); |
| if (ret < 0) |
| /* no more formats */ |
| return 0; |
| |
| fmt = soc_mbus_get_fmtdesc(code); |
| if (!fmt) { |
| dev_err(dev, "Invalid format code #%u: %d\n", idx, code); |
| return 0; |
| } |
| |
| if (code == V4L2_MBUS_FMT_YUYV8_2X8 || |
| code == V4L2_MBUS_FMT_UYVY8_2X8) { |
| formats++; |
| if (xlate) { |
| /* |
| * CH2 can output YUV420 which is a standard format in |
| * soc_mediabus.c |
| */ |
| xlate->host_fmt = |
| soc_mbus_get_fmtdesc(V4L2_MBUS_FMT_YUYV8_1_5X8); |
| xlate->code = code; |
| dev_dbg(dev, "Providing host format %s for sensor code %d\n", |
| xlate->host_fmt->name, code); |
| xlate++; |
| } |
| } |
| |
| /* Generic pass-trough */ |
| formats++; |
| if (xlate) { |
| xlate->host_fmt = fmt; |
| xlate->code = code; |
| xlate++; |
| } |
| return formats; |
| } |
| |
| static int mx2_emmaprp_resize(struct mx2_camera_dev *pcdev, |
| struct v4l2_mbus_framefmt *mf_in, |
| struct v4l2_pix_format *pix_out, bool apply) |
| { |
| int num, den; |
| unsigned long m; |
| int i, dir; |
| |
| for (dir = RESIZE_DIR_H; dir <= RESIZE_DIR_V; dir++) { |
| struct emma_prp_resize tmprsz; |
| unsigned char *s = tmprsz.s; |
| int len = 0; |
| int in, out; |
| |
| if (dir == RESIZE_DIR_H) { |
| in = mf_in->width; |
| out = pix_out->width; |
| } else { |
| in = mf_in->height; |
| out = pix_out->height; |
| } |
| |
| if (in < out) |
| return -EINVAL; |
| else if (in == out) |
| continue; |
| |
| /* Calculate ratio */ |
| m = gcd(in, out); |
| num = in / m; |
| den = out / m; |
| if (num > RESIZE_NUM_MAX) |
| return -EINVAL; |
| |
| if ((num >= 2 * den) && (den == 1) && |
| (num < 9) && (!(num & 0x01))) { |
| int sum = 0; |
| int j; |
| |
| /* Average scaling for >= 2:1 ratios */ |
| /* Support can be added for num >=9 and odd values */ |
| |
| tmprsz.algo = RESIZE_ALGO_AVERAGING; |
| len = num; |
| |
| for (i = 0; i < (len / 2); i++) |
| s[i] = 8; |
| |
| do { |
| for (i = 0; i < (len / 2); i++) { |
| s[i] = s[i] >> 1; |
| sum = 0; |
| for (j = 0; j < (len / 2); j++) |
| sum += s[j]; |
| if (sum == 4) |
| break; |
| } |
| } while (sum != 4); |
| |
| for (i = (len / 2); i < len; i++) |
| s[i] = s[len - i - 1]; |
| |
| s[len - 1] |= SZ_COEF; |
| } else { |
| /* bilinear scaling for < 2:1 ratios */ |
| int v; /* overflow counter */ |
| int coeff, nxt; /* table output */ |
| int in_pos_inc = 2 * den; |
| int out_pos = num; |
| int out_pos_inc = 2 * num; |
| int init_carry = num - den; |
| int carry = init_carry; |
| |
| tmprsz.algo = RESIZE_ALGO_BILINEAR; |
| v = den + in_pos_inc; |
| do { |
| coeff = v - out_pos; |
| out_pos += out_pos_inc; |
| carry += out_pos_inc; |
| for (nxt = 0; v < out_pos; nxt++) { |
| v += in_pos_inc; |
| carry -= in_pos_inc; |
| } |
| |
| if (len > RESIZE_NUM_MAX) |
| return -EINVAL; |
| |
| coeff = ((coeff << BC_COEF) + |
| (in_pos_inc >> 1)) / in_pos_inc; |
| |
| if (coeff >= (SZ_COEF - 1)) |
| coeff--; |
| |
| coeff |= SZ_COEF; |
| s[len] = (unsigned char)coeff; |
| len++; |
| |
| for (i = 1; i < nxt; i++) { |
| if (len >= RESIZE_NUM_MAX) |
| return -EINVAL; |
| s[len] = 0; |
| len++; |
| } |
| } while (carry != init_carry); |
| } |
| tmprsz.len = len; |
| if (dir == RESIZE_DIR_H) |
| mf_in->width = pix_out->width; |
| else |
| mf_in->height = pix_out->height; |
| |
| if (apply) |
| memcpy(&pcdev->resizing[dir], &tmprsz, sizeof(tmprsz)); |
| } |
| return 0; |
| } |
| |
| static int mx2_camera_set_fmt(struct soc_camera_device *icd, |
| struct v4l2_format *f) |
| { |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct mx2_camera_dev *pcdev = ici->priv; |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| const struct soc_camera_format_xlate *xlate; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| struct v4l2_mbus_framefmt mf; |
| int ret; |
| |
| dev_dbg(icd->parent, "%s: requested params: width = %d, height = %d\n", |
| __func__, pix->width, pix->height); |
| |
| xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); |
| if (!xlate) { |
| dev_warn(icd->parent, "Format %x not found\n", |
| pix->pixelformat); |
| return -EINVAL; |
| } |
| |
| mf.width = pix->width; |
| mf.height = pix->height; |
| mf.field = pix->field; |
| mf.colorspace = pix->colorspace; |
| mf.code = xlate->code; |
| |
| ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); |
| if (ret < 0 && ret != -ENOIOCTLCMD) |
| return ret; |
| |
| /* Store width and height returned by the sensor for resizing */ |
| pcdev->s_width = mf.width; |
| pcdev->s_height = mf.height; |
| dev_dbg(icd->parent, "%s: sensor params: width = %d, height = %d\n", |
| __func__, pcdev->s_width, pcdev->s_height); |
| |
| pcdev->emma_prp = mx27_emma_prp_get_format(xlate->code, |
| xlate->host_fmt->fourcc); |
| |
| memset(pcdev->resizing, 0, sizeof(pcdev->resizing)); |
| if ((mf.width != pix->width || mf.height != pix->height) && |
| pcdev->emma_prp->cfg.in_fmt == PRP_CNTL_DATA_IN_YUV422) { |
| if (mx2_emmaprp_resize(pcdev, &mf, pix, true) < 0) |
| dev_dbg(icd->parent, "%s: can't resize\n", __func__); |
| } |
| |
| if (mf.code != xlate->code) |
| return -EINVAL; |
| |
| pix->width = mf.width; |
| pix->height = mf.height; |
| pix->field = mf.field; |
| pix->colorspace = mf.colorspace; |
| icd->current_fmt = xlate; |
| |
| dev_dbg(icd->parent, "%s: returned params: width = %d, height = %d\n", |
| __func__, pix->width, pix->height); |
| |
| return 0; |
| } |
| |
| static int mx2_camera_try_fmt(struct soc_camera_device *icd, |
| struct v4l2_format *f) |
| { |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); |
| const struct soc_camera_format_xlate *xlate; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| struct v4l2_mbus_framefmt mf; |
| __u32 pixfmt = pix->pixelformat; |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); |
| struct mx2_camera_dev *pcdev = ici->priv; |
| unsigned int width_limit; |
| int ret; |
| |
| dev_dbg(icd->parent, "%s: requested params: width = %d, height = %d\n", |
| __func__, pix->width, pix->height); |
| |
| xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); |
| if (pixfmt && !xlate) { |
| dev_warn(icd->parent, "Format %x not found\n", pixfmt); |
| return -EINVAL; |
| } |
| |
| /* FIXME: implement MX27 limits */ |
| |
| /* limit to MX25 hardware capabilities */ |
| if (cpu_is_mx25()) { |
| if (xlate->host_fmt->bits_per_sample <= 8) |
| width_limit = 0xffff * 4; |
| else |
| width_limit = 0xffff * 2; |
| /* CSIIMAG_PARA limit */ |
| if (pix->width > width_limit) |
| pix->width = width_limit; |
| if (pix->height > 0xffff) |
| pix->height = 0xffff; |
| |
| pix->bytesperline = soc_mbus_bytes_per_line(pix->width, |
| xlate->host_fmt); |
| if (pix->bytesperline < 0) |
| return pix->bytesperline; |
| pix->sizeimage = soc_mbus_image_size(xlate->host_fmt, |
| pix->bytesperline, pix->height); |
| /* Check against the CSIRXCNT limit */ |
| if (pix->sizeimage > 4 * 0x3ffff) { |
| /* Adjust geometry, preserve aspect ratio */ |
| unsigned int new_height = int_sqrt(div_u64(0x3ffffULL * |
| 4 * pix->height, pix->bytesperline)); |
| pix->width = new_height * pix->width / pix->height; |
| pix->height = new_height; |
| pix->bytesperline = soc_mbus_bytes_per_line(pix->width, |
| xlate->host_fmt); |
| BUG_ON(pix->bytesperline < 0); |
| pix->sizeimage = soc_mbus_image_size(xlate->host_fmt, |
| pix->bytesperline, pix->height); |
| } |
| } |
| |
| /* limit to sensor capabilities */ |
| mf.width = pix->width; |
| mf.height = pix->height; |
| mf.field = pix->field; |
| mf.colorspace = pix->colorspace; |
| mf.code = xlate->code; |
| |
| ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf); |
| if (ret < 0) |
| return ret; |
| |
| dev_dbg(icd->parent, "%s: sensor params: width = %d, height = %d\n", |
| __func__, pcdev->s_width, pcdev->s_height); |
| |
| /* If the sensor does not support image size try PrP resizing */ |
| pcdev->emma_prp = mx27_emma_prp_get_format(xlate->code, |
| xlate->host_fmt->fourcc); |
| |
| memset(pcdev->resizing, 0, sizeof(pcdev->resizing)); |
| if ((mf.width != pix->width || mf.height != pix->height) && |
| pcdev->emma_prp->cfg.in_fmt == PRP_CNTL_DATA_IN_YUV422) { |
| if (mx2_emmaprp_resize(pcdev, &mf, pix, false) < 0) |
| dev_dbg(icd->parent, "%s: can't resize\n", __func__); |
| } |
| |
| if (mf.field == V4L2_FIELD_ANY) |
| mf.field = V4L2_FIELD_NONE; |
| /* |
| * Driver supports interlaced images provided they have |
| * both fields so that they can be processed as if they |
| * were progressive. |
| */ |
| if (mf.field != V4L2_FIELD_NONE && !V4L2_FIELD_HAS_BOTH(mf.field)) { |
| dev_err(icd->parent, "Field type %d unsupported.\n", |
| mf.field); |
| return -EINVAL; |
| } |
| |
| pix->width = mf.width; |
| pix->height = mf.height; |
| pix->field = mf.field; |
| pix->colorspace = mf.colorspace; |
| |
| dev_dbg(icd->parent, "%s: returned params: width = %d, height = %d\n", |
| __func__, pix->width, pix->height); |
| |
| return 0; |
| } |
| |
| static int mx2_camera_querycap(struct soc_camera_host *ici, |
| struct v4l2_capability *cap) |
| { |
| /* cap->name is set by the friendly caller:-> */ |
| strlcpy(cap->card, MX2_CAM_DRIVER_DESCRIPTION, sizeof(cap->card)); |
| cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; |
| |
| return 0; |
| } |
| |
| static unsigned int mx2_camera_poll(struct file *file, poll_table *pt) |
| { |
| struct soc_camera_device *icd = file->private_data; |
| |
| return vb2_poll(&icd->vb2_vidq, file, pt); |
| } |
| |
| static struct soc_camera_host_ops mx2_soc_camera_host_ops = { |
| .owner = THIS_MODULE, |
| .add = mx2_camera_add_device, |
| .remove = mx2_camera_remove_device, |
| .set_fmt = mx2_camera_set_fmt, |
| .set_crop = mx2_camera_set_crop, |
| .get_formats = mx2_camera_get_formats, |
| .try_fmt = mx2_camera_try_fmt, |
| .init_videobuf2 = mx2_camera_init_videobuf, |
| .poll = mx2_camera_poll, |
| .querycap = mx2_camera_querycap, |
| .set_bus_param = mx2_camera_set_bus_param, |
| }; |
| |
| static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev, |
| int bufnum, bool err) |
| { |
| #ifdef DEBUG |
| struct mx2_fmt_cfg *prp = pcdev->emma_prp; |
| #endif |
| struct mx2_buf_internal *ibuf; |
| struct mx2_buffer *buf; |
| struct vb2_buffer *vb; |
| unsigned long phys; |
| |
| ibuf = list_first_entry(&pcdev->active_bufs, struct mx2_buf_internal, |
| queue); |
| |
| BUG_ON(ibuf->bufnum != bufnum); |
| |
| if (ibuf->discard) { |
| /* |
| * Discard buffer must not be returned to user space. |
| * Just return it to the discard queue. |
| */ |
| list_move_tail(pcdev->active_bufs.next, &pcdev->discard); |
| } else { |
| buf = mx2_ibuf_to_buf(ibuf); |
| |
| vb = &buf->vb; |
| #ifdef DEBUG |
| phys = vb2_dma_contig_plane_dma_addr(vb, 0); |
| if (prp->cfg.channel == 1) { |
| if (readl(pcdev->base_emma + PRP_DEST_RGB1_PTR + |
| 4 * bufnum) != phys) { |
| dev_err(pcdev->dev, "%lx != %x\n", phys, |
| readl(pcdev->base_emma + |
| PRP_DEST_RGB1_PTR + 4 * bufnum)); |
| } |
| } else { |
| if (readl(pcdev->base_emma + PRP_DEST_Y_PTR - |
| 0x14 * bufnum) != phys) { |
| dev_err(pcdev->dev, "%lx != %x\n", phys, |
| readl(pcdev->base_emma + |
| PRP_DEST_Y_PTR - 0x14 * bufnum)); |
| } |
| } |
| #endif |
| dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%p %lu\n", __func__, vb, |
| vb2_plane_vaddr(vb, 0), |
| vb2_get_plane_payload(vb, 0)); |
| |
| list_del_init(&buf->internal.queue); |
| do_gettimeofday(&vb->v4l2_buf.timestamp); |
| vb->v4l2_buf.sequence = pcdev->frame_count; |
| if (err) |
| vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); |
| else |
| vb2_buffer_done(vb, VB2_BUF_STATE_DONE); |
| } |
| |
| pcdev->frame_count++; |
| |
| if (list_empty(&pcdev->capture)) { |
| if (list_empty(&pcdev->discard)) { |
| dev_warn(pcdev->dev, "%s: trying to access empty discard list\n", |
| __func__); |
| return; |
| } |
| |
| ibuf = list_first_entry(&pcdev->discard, |
| struct mx2_buf_internal, queue); |
| ibuf->bufnum = bufnum; |
| |
| list_move_tail(pcdev->discard.next, &pcdev->active_bufs); |
| mx27_update_emma_buf(pcdev, pcdev->discard_buffer_dma, bufnum); |
| return; |
| } |
| |
| buf = list_first_entry(&pcdev->capture, struct mx2_buffer, |
| internal.queue); |
| |
| buf->internal.bufnum = bufnum; |
| |
| list_move_tail(pcdev->capture.next, &pcdev->active_bufs); |
| |
| vb = &buf->vb; |
| buf->state = MX2_STATE_ACTIVE; |
| |
| phys = vb2_dma_contig_plane_dma_addr(vb, 0); |
| mx27_update_emma_buf(pcdev, phys, bufnum); |
| } |
| |
| static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data) |
| { |
| struct mx2_camera_dev *pcdev = data; |
| unsigned int status = readl(pcdev->base_emma + PRP_INTRSTATUS); |
| struct mx2_buf_internal *ibuf; |
| |
| spin_lock(&pcdev->lock); |
| |
| if (list_empty(&pcdev->active_bufs)) { |
| dev_warn(pcdev->dev, "%s: called while active list is empty\n", |
| __func__); |
| |
| if (!status) { |
| spin_unlock(&pcdev->lock); |
| return IRQ_NONE; |
| } |
| } |
| |
| if (status & (1 << 7)) { /* overflow */ |
| u32 cntl = readl(pcdev->base_emma + PRP_CNTL); |
| writel(cntl & ~(PRP_CNTL_CH1EN | PRP_CNTL_CH2EN), |
| pcdev->base_emma + PRP_CNTL); |
| writel(cntl, pcdev->base_emma + PRP_CNTL); |
| |
| ibuf = list_first_entry(&pcdev->active_bufs, |
| struct mx2_buf_internal, queue); |
| mx27_camera_frame_done_emma(pcdev, |
| ibuf->bufnum, true); |
| |
| status &= ~(1 << 7); |
| } else if (((status & (3 << 5)) == (3 << 5)) || |
| ((status & (3 << 3)) == (3 << 3))) { |
| /* |
| * Both buffers have triggered, process the one we're expecting |
| * to first |
| */ |
| ibuf = list_first_entry(&pcdev->active_bufs, |
| struct mx2_buf_internal, queue); |
| mx27_camera_frame_done_emma(pcdev, ibuf->bufnum, false); |
| status &= ~(1 << (6 - ibuf->bufnum)); /* mark processed */ |
| } else if ((status & (1 << 6)) || (status & (1 << 4))) { |
| mx27_camera_frame_done_emma(pcdev, 0, false); |
| } else if ((status & (1 << 5)) || (status & (1 << 3))) { |
| mx27_camera_frame_done_emma(pcdev, 1, false); |
| } |
| |
| spin_unlock(&pcdev->lock); |
| writel(status, pcdev->base_emma + PRP_INTRSTATUS); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev) |
| { |
| struct resource *res_emma = pcdev->res_emma; |
| int err = 0; |
| |
| if (!request_mem_region(res_emma->start, resource_size(res_emma), |
| MX2_CAM_DRV_NAME)) { |
| err = -EBUSY; |
| goto out; |
| } |
| |
| pcdev->base_emma = ioremap(res_emma->start, resource_size(res_emma)); |
| if (!pcdev->base_emma) { |
| err = -ENOMEM; |
| goto exit_release; |
| } |
| |
| err = request_irq(pcdev->irq_emma, mx27_camera_emma_irq, 0, |
| MX2_CAM_DRV_NAME, pcdev); |
| if (err) { |
| dev_err(pcdev->dev, "Camera EMMA interrupt register failed \n"); |
| goto exit_iounmap; |
| } |
| |
| pcdev->clk_emma = clk_get(NULL, "emma"); |
| if (IS_ERR(pcdev->clk_emma)) { |
| err = PTR_ERR(pcdev->clk_emma); |
| goto exit_free_irq; |
| } |
| |
| clk_enable(pcdev->clk_emma); |
| |
| err = mx27_camera_emma_prp_reset(pcdev); |
| if (err) |
| goto exit_clk_emma_put; |
| |
| return err; |
| |
| exit_clk_emma_put: |
| clk_disable(pcdev->clk_emma); |
| clk_put(pcdev->clk_emma); |
| exit_free_irq: |
| free_irq(pcdev->irq_emma, pcdev); |
| exit_iounmap: |
| iounmap(pcdev->base_emma); |
| exit_release: |
| release_mem_region(res_emma->start, resource_size(res_emma)); |
| out: |
| return err; |
| } |
| |
| static int __devinit mx2_camera_probe(struct platform_device *pdev) |
| { |
| struct mx2_camera_dev *pcdev; |
| struct resource *res_csi, *res_emma; |
| void __iomem *base_csi; |
| int irq_csi, irq_emma; |
| int err = 0; |
| |
| dev_dbg(&pdev->dev, "initialising\n"); |
| |
| res_csi = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| irq_csi = platform_get_irq(pdev, 0); |
| if (res_csi == NULL || irq_csi < 0) { |
| dev_err(&pdev->dev, "Missing platform resources data\n"); |
| err = -ENODEV; |
| goto exit; |
| } |
| |
| pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL); |
| if (!pcdev) { |
| dev_err(&pdev->dev, "Could not allocate pcdev\n"); |
| err = -ENOMEM; |
| goto exit; |
| } |
| |
| pcdev->clk_csi = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(pcdev->clk_csi)) { |
| dev_err(&pdev->dev, "Could not get csi clock\n"); |
| err = PTR_ERR(pcdev->clk_csi); |
| goto exit_kfree; |
| } |
| |
| pcdev->res_csi = res_csi; |
| pcdev->pdata = pdev->dev.platform_data; |
| if (pcdev->pdata) { |
| long rate; |
| |
| pcdev->platform_flags = pcdev->pdata->flags; |
| |
| rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2); |
| if (rate <= 0) { |
| err = -ENODEV; |
| goto exit_dma_free; |
| } |
| err = clk_set_rate(pcdev->clk_csi, rate); |
| if (err < 0) |
| goto exit_dma_free; |
| } |
| |
| INIT_LIST_HEAD(&pcdev->capture); |
| INIT_LIST_HEAD(&pcdev->active_bufs); |
| INIT_LIST_HEAD(&pcdev->discard); |
| spin_lock_init(&pcdev->lock); |
| |
| /* |
| * Request the regions. |
| */ |
| if (!request_mem_region(res_csi->start, resource_size(res_csi), |
| MX2_CAM_DRV_NAME)) { |
| err = -EBUSY; |
| goto exit_dma_free; |
| } |
| |
| base_csi = ioremap(res_csi->start, resource_size(res_csi)); |
| if (!base_csi) { |
| err = -ENOMEM; |
| goto exit_release; |
| } |
| pcdev->irq_csi = irq_csi; |
| pcdev->base_csi = base_csi; |
| pcdev->base_dma = res_csi->start; |
| pcdev->dev = &pdev->dev; |
| |
| if (cpu_is_mx25()) { |
| err = request_irq(pcdev->irq_csi, mx25_camera_irq, 0, |
| MX2_CAM_DRV_NAME, pcdev); |
| if (err) { |
| dev_err(pcdev->dev, "Camera interrupt register failed \n"); |
| goto exit_iounmap; |
| } |
| } |
| |
| if (cpu_is_mx27()) { |
| /* EMMA support */ |
| res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| irq_emma = platform_get_irq(pdev, 1); |
| |
| if (!res_emma || !irq_emma) { |
| dev_err(&pdev->dev, "no EMMA resources\n"); |
| goto exit_free_irq; |
| } |
| |
| pcdev->res_emma = res_emma; |
| pcdev->irq_emma = irq_emma; |
| if (mx27_camera_emma_init(pcdev)) |
| goto exit_free_irq; |
| } |
| |
| pcdev->soc_host.drv_name = MX2_CAM_DRV_NAME, |
| pcdev->soc_host.ops = &mx2_soc_camera_host_ops, |
| pcdev->soc_host.priv = pcdev; |
| pcdev->soc_host.v4l2_dev.dev = &pdev->dev; |
| pcdev->soc_host.nr = pdev->id; |
| if (cpu_is_mx25()) |
| pcdev->soc_host.capabilities = SOCAM_HOST_CAP_STRIDE; |
| |
| pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); |
| if (IS_ERR(pcdev->alloc_ctx)) { |
| err = PTR_ERR(pcdev->alloc_ctx); |
| goto eallocctx; |
| } |
| err = soc_camera_host_register(&pcdev->soc_host); |
| if (err) |
| goto exit_free_emma; |
| |
| dev_info(&pdev->dev, "MX2 Camera (CSI) driver probed, clock frequency: %ld\n", |
| clk_get_rate(pcdev->clk_csi)); |
| |
| return 0; |
| |
| exit_free_emma: |
| vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); |
| eallocctx: |
| if (cpu_is_mx27()) { |
| free_irq(pcdev->irq_emma, pcdev); |
| clk_disable(pcdev->clk_emma); |
| clk_put(pcdev->clk_emma); |
| iounmap(pcdev->base_emma); |
| release_mem_region(pcdev->res_emma->start, resource_size(pcdev->res_emma)); |
| } |
| exit_free_irq: |
| if (cpu_is_mx25()) |
| free_irq(pcdev->irq_csi, pcdev); |
| exit_iounmap: |
| iounmap(base_csi); |
| exit_release: |
| release_mem_region(res_csi->start, resource_size(res_csi)); |
| exit_dma_free: |
| clk_put(pcdev->clk_csi); |
| exit_kfree: |
| kfree(pcdev); |
| exit: |
| return err; |
| } |
| |
| static int __devexit mx2_camera_remove(struct platform_device *pdev) |
| { |
| struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); |
| struct mx2_camera_dev *pcdev = container_of(soc_host, |
| struct mx2_camera_dev, soc_host); |
| struct resource *res; |
| |
| clk_put(pcdev->clk_csi); |
| if (cpu_is_mx25()) |
| free_irq(pcdev->irq_csi, pcdev); |
| if (cpu_is_mx27()) |
| free_irq(pcdev->irq_emma, pcdev); |
| |
| soc_camera_host_unregister(&pcdev->soc_host); |
| |
| vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); |
| |
| iounmap(pcdev->base_csi); |
| |
| if (cpu_is_mx27()) { |
| clk_disable(pcdev->clk_emma); |
| clk_put(pcdev->clk_emma); |
| iounmap(pcdev->base_emma); |
| res = pcdev->res_emma; |
| release_mem_region(res->start, resource_size(res)); |
| } |
| |
| res = pcdev->res_csi; |
| release_mem_region(res->start, resource_size(res)); |
| |
| kfree(pcdev); |
| |
| dev_info(&pdev->dev, "MX2 Camera driver unloaded\n"); |
| |
| return 0; |
| } |
| |
| static struct platform_driver mx2_camera_driver = { |
| .driver = { |
| .name = MX2_CAM_DRV_NAME, |
| }, |
| .remove = __devexit_p(mx2_camera_remove), |
| }; |
| |
| |
| static int __init mx2_camera_init(void) |
| { |
| return platform_driver_probe(&mx2_camera_driver, &mx2_camera_probe); |
| } |
| |
| static void __exit mx2_camera_exit(void) |
| { |
| return platform_driver_unregister(&mx2_camera_driver); |
| } |
| |
| module_init(mx2_camera_init); |
| module_exit(mx2_camera_exit); |
| |
| MODULE_DESCRIPTION("i.MX27/i.MX25 SoC Camera Host driver"); |
| MODULE_AUTHOR("Sascha Hauer <sha@pengutronix.de>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(MX2_CAM_VERSION); |