| /* |
| * Driver for SiliconFile SR030PC30 VGA (1/10-Inch) Image Sensor with ISP |
| * |
| * Copyright (C) 2010 Samsung Electronics Co., Ltd |
| * Author: Sylwester Nawrocki, s.nawrocki@samsung.com |
| * |
| * Based on original driver authored by Dongsoo Nathaniel Kim |
| * and HeungJun Kim <riverful.kim@samsung.com>. |
| * |
| * Based on mt9v011 Micron Digital Image Sensor driver |
| * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-subdev.h> |
| #include <media/v4l2-mediabus.h> |
| #include <media/sr030pc30.h> |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| |
| #define MODULE_NAME "SR030PC30" |
| |
| /* |
| * Register offsets within a page |
| * b15..b8 - page id, b7..b0 - register address |
| */ |
| #define POWER_CTRL_REG 0x0001 |
| #define PAGEMODE_REG 0x03 |
| #define DEVICE_ID_REG 0x0004 |
| #define NOON010PC30_ID 0x86 |
| #define SR030PC30_ID 0x8C |
| #define VDO_CTL1_REG 0x0010 |
| #define SUBSAMPL_NONE_VGA 0 |
| #define SUBSAMPL_QVGA 0x10 |
| #define SUBSAMPL_QQVGA 0x20 |
| #define VDO_CTL2_REG 0x0011 |
| #define SYNC_CTL_REG 0x0012 |
| #define WIN_ROWH_REG 0x0020 |
| #define WIN_ROWL_REG 0x0021 |
| #define WIN_COLH_REG 0x0022 |
| #define WIN_COLL_REG 0x0023 |
| #define WIN_HEIGHTH_REG 0x0024 |
| #define WIN_HEIGHTL_REG 0x0025 |
| #define WIN_WIDTHH_REG 0x0026 |
| #define WIN_WIDTHL_REG 0x0027 |
| #define HBLANKH_REG 0x0040 |
| #define HBLANKL_REG 0x0041 |
| #define VSYNCH_REG 0x0042 |
| #define VSYNCL_REG 0x0043 |
| /* page 10 */ |
| #define ISP_CTL_REG(n) (0x1010 + (n)) |
| #define YOFS_REG 0x1040 |
| #define DARK_YOFS_REG 0x1041 |
| #define AG_ABRTH_REG 0x1050 |
| #define SAT_CTL_REG 0x1060 |
| #define BSAT_REG 0x1061 |
| #define RSAT_REG 0x1062 |
| #define AG_SAT_TH_REG 0x1063 |
| /* page 11 */ |
| #define ZLPF_CTRL_REG 0x1110 |
| #define ZLPF_CTRL2_REG 0x1112 |
| #define ZLPF_AGH_THR_REG 0x1121 |
| #define ZLPF_THR_REG 0x1160 |
| #define ZLPF_DYN_THR_REG 0x1160 |
| /* page 12 */ |
| #define YCLPF_CTL1_REG 0x1240 |
| #define YCLPF_CTL2_REG 0x1241 |
| #define YCLPF_THR_REG 0x1250 |
| #define BLPF_CTL_REG 0x1270 |
| #define BLPF_THR1_REG 0x1274 |
| #define BLPF_THR2_REG 0x1275 |
| /* page 14 - Lens Shading Compensation */ |
| #define LENS_CTRL_REG 0x1410 |
| #define LENS_XCEN_REG 0x1420 |
| #define LENS_YCEN_REG 0x1421 |
| #define LENS_R_COMP_REG 0x1422 |
| #define LENS_G_COMP_REG 0x1423 |
| #define LENS_B_COMP_REG 0x1424 |
| /* page 15 - Color correction */ |
| #define CMC_CTL_REG 0x1510 |
| #define CMC_OFSGH_REG 0x1514 |
| #define CMC_OFSGL_REG 0x1516 |
| #define CMC_SIGN_REG 0x1517 |
| /* Color correction coefficients */ |
| #define CMC_COEF_REG(n) (0x1530 + (n)) |
| /* Color correction offset coefficients */ |
| #define CMC_OFS_REG(n) (0x1540 + (n)) |
| /* page 16 - Gamma correction */ |
| #define GMA_CTL_REG 0x1610 |
| /* Gamma correction coefficients 0.14 */ |
| #define GMA_COEF_REG(n) (0x1630 + (n)) |
| /* page 20 - Auto Exposure */ |
| #define AE_CTL1_REG 0x2010 |
| #define AE_CTL2_REG 0x2011 |
| #define AE_FRM_CTL_REG 0x2020 |
| #define AE_FINE_CTL_REG(n) (0x2028 + (n)) |
| #define EXP_TIMEH_REG 0x2083 |
| #define EXP_TIMEM_REG 0x2084 |
| #define EXP_TIMEL_REG 0x2085 |
| #define EXP_MMINH_REG 0x2086 |
| #define EXP_MMINL_REG 0x2087 |
| #define EXP_MMAXH_REG 0x2088 |
| #define EXP_MMAXM_REG 0x2089 |
| #define EXP_MMAXL_REG 0x208A |
| /* page 22 - Auto White Balance */ |
| #define AWB_CTL1_REG 0x2210 |
| #define AWB_ENABLE 0x80 |
| #define AWB_CTL2_REG 0x2211 |
| #define MWB_ENABLE 0x01 |
| /* RGB gain control (manual WB) when AWB_CTL1[7]=0 */ |
| #define AWB_RGAIN_REG 0x2280 |
| #define AWB_GGAIN_REG 0x2281 |
| #define AWB_BGAIN_REG 0x2282 |
| #define AWB_RMAX_REG 0x2283 |
| #define AWB_RMIN_REG 0x2284 |
| #define AWB_BMAX_REG 0x2285 |
| #define AWB_BMIN_REG 0x2286 |
| /* R, B gain range in bright light conditions */ |
| #define AWB_RMAXB_REG 0x2287 |
| #define AWB_RMINB_REG 0x2288 |
| #define AWB_BMAXB_REG 0x2289 |
| #define AWB_BMINB_REG 0x228A |
| /* manual white balance, when AWB_CTL2[0]=1 */ |
| #define MWB_RGAIN_REG 0x22B2 |
| #define MWB_BGAIN_REG 0x22B3 |
| /* the token to mark an array end */ |
| #define REG_TERM 0xFFFF |
| |
| /* Minimum and maximum exposure time in ms */ |
| #define EXPOS_MIN_MS 1 |
| #define EXPOS_MAX_MS 125 |
| |
| struct sr030pc30_info { |
| struct v4l2_subdev sd; |
| const struct sr030pc30_platform_data *pdata; |
| const struct sr030pc30_format *curr_fmt; |
| const struct sr030pc30_frmsize *curr_win; |
| unsigned int auto_wb:1; |
| unsigned int auto_exp:1; |
| unsigned int hflip:1; |
| unsigned int vflip:1; |
| unsigned int sleep:1; |
| unsigned int exposure; |
| u8 blue_balance; |
| u8 red_balance; |
| u8 i2c_reg_page; |
| }; |
| |
| struct sr030pc30_format { |
| enum v4l2_mbus_pixelcode code; |
| enum v4l2_colorspace colorspace; |
| u16 ispctl1_reg; |
| }; |
| |
| struct sr030pc30_frmsize { |
| u16 width; |
| u16 height; |
| int vid_ctl1; |
| }; |
| |
| struct i2c_regval { |
| u16 addr; |
| u16 val; |
| }; |
| |
| static const struct v4l2_queryctrl sr030pc30_ctrl[] = { |
| { |
| .id = V4L2_CID_AUTO_WHITE_BALANCE, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Auto White Balance", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| .default_value = 1, |
| }, { |
| .id = V4L2_CID_RED_BALANCE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Red Balance", |
| .minimum = 0, |
| .maximum = 127, |
| .step = 1, |
| .default_value = 64, |
| .flags = 0, |
| }, { |
| .id = V4L2_CID_BLUE_BALANCE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Blue Balance", |
| .minimum = 0, |
| .maximum = 127, |
| .step = 1, |
| .default_value = 64, |
| }, { |
| .id = V4L2_CID_EXPOSURE_AUTO, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Auto Exposure", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| .default_value = 1, |
| }, { |
| .id = V4L2_CID_EXPOSURE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Exposure", |
| .minimum = EXPOS_MIN_MS, |
| .maximum = EXPOS_MAX_MS, |
| .step = 1, |
| .default_value = 1, |
| }, { |
| } |
| }; |
| |
| /* supported resolutions */ |
| static const struct sr030pc30_frmsize sr030pc30_sizes[] = { |
| { |
| .width = 640, |
| .height = 480, |
| .vid_ctl1 = SUBSAMPL_NONE_VGA, |
| }, { |
| .width = 320, |
| .height = 240, |
| .vid_ctl1 = SUBSAMPL_QVGA, |
| }, { |
| .width = 160, |
| .height = 120, |
| .vid_ctl1 = SUBSAMPL_QQVGA, |
| }, |
| }; |
| |
| /* supported pixel formats */ |
| static const struct sr030pc30_format sr030pc30_formats[] = { |
| { |
| .code = V4L2_MBUS_FMT_YUYV8_2X8, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .ispctl1_reg = 0x03, |
| }, { |
| .code = V4L2_MBUS_FMT_YVYU8_2X8, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .ispctl1_reg = 0x02, |
| }, { |
| .code = V4L2_MBUS_FMT_VYUY8_2X8, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .ispctl1_reg = 0, |
| }, { |
| .code = V4L2_MBUS_FMT_UYVY8_2X8, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .ispctl1_reg = 0x01, |
| }, { |
| .code = V4L2_MBUS_FMT_RGB565_2X8_BE, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .ispctl1_reg = 0x40, |
| }, |
| }; |
| |
| static const struct i2c_regval sr030pc30_base_regs[] = { |
| /* Window size and position within pixel matrix */ |
| { WIN_ROWH_REG, 0x00 }, { WIN_ROWL_REG, 0x06 }, |
| { WIN_COLH_REG, 0x00 }, { WIN_COLL_REG, 0x06 }, |
| { WIN_HEIGHTH_REG, 0x01 }, { WIN_HEIGHTL_REG, 0xE0 }, |
| { WIN_WIDTHH_REG, 0x02 }, { WIN_WIDTHL_REG, 0x80 }, |
| { HBLANKH_REG, 0x01 }, { HBLANKL_REG, 0x50 }, |
| { VSYNCH_REG, 0x00 }, { VSYNCL_REG, 0x14 }, |
| { SYNC_CTL_REG, 0 }, |
| /* Color corection and saturation */ |
| { ISP_CTL_REG(0), 0x30 }, { YOFS_REG, 0x80 }, |
| { DARK_YOFS_REG, 0x04 }, { AG_ABRTH_REG, 0x78 }, |
| { SAT_CTL_REG, 0x1F }, { BSAT_REG, 0x90 }, |
| { AG_SAT_TH_REG, 0xF0 }, { 0x1064, 0x80 }, |
| { CMC_CTL_REG, 0x03 }, { CMC_OFSGH_REG, 0x3C }, |
| { CMC_OFSGL_REG, 0x2C }, { CMC_SIGN_REG, 0x2F }, |
| { CMC_COEF_REG(0), 0xCB }, { CMC_OFS_REG(0), 0x87 }, |
| { CMC_COEF_REG(1), 0x61 }, { CMC_OFS_REG(1), 0x18 }, |
| { CMC_COEF_REG(2), 0x16 }, { CMC_OFS_REG(2), 0x91 }, |
| { CMC_COEF_REG(3), 0x23 }, { CMC_OFS_REG(3), 0x94 }, |
| { CMC_COEF_REG(4), 0xCE }, { CMC_OFS_REG(4), 0x9f }, |
| { CMC_COEF_REG(5), 0x2B }, { CMC_OFS_REG(5), 0x33 }, |
| { CMC_COEF_REG(6), 0x01 }, { CMC_OFS_REG(6), 0x00 }, |
| { CMC_COEF_REG(7), 0x34 }, { CMC_OFS_REG(7), 0x94 }, |
| { CMC_COEF_REG(8), 0x75 }, { CMC_OFS_REG(8), 0x14 }, |
| /* Color corection coefficients */ |
| { GMA_CTL_REG, 0x03 }, { GMA_COEF_REG(0), 0x00 }, |
| { GMA_COEF_REG(1), 0x19 }, { GMA_COEF_REG(2), 0x26 }, |
| { GMA_COEF_REG(3), 0x3B }, { GMA_COEF_REG(4), 0x5D }, |
| { GMA_COEF_REG(5), 0x79 }, { GMA_COEF_REG(6), 0x8E }, |
| { GMA_COEF_REG(7), 0x9F }, { GMA_COEF_REG(8), 0xAF }, |
| { GMA_COEF_REG(9), 0xBD }, { GMA_COEF_REG(10), 0xCA }, |
| { GMA_COEF_REG(11), 0xDD }, { GMA_COEF_REG(12), 0xEC }, |
| { GMA_COEF_REG(13), 0xF7 }, { GMA_COEF_REG(14), 0xFF }, |
| /* Noise reduction, Z-LPF, YC-LPF and BLPF filters setup */ |
| { ZLPF_CTRL_REG, 0x99 }, { ZLPF_CTRL2_REG, 0x0E }, |
| { ZLPF_AGH_THR_REG, 0x29 }, { ZLPF_THR_REG, 0x0F }, |
| { ZLPF_DYN_THR_REG, 0x63 }, { YCLPF_CTL1_REG, 0x23 }, |
| { YCLPF_CTL2_REG, 0x3B }, { YCLPF_THR_REG, 0x05 }, |
| { BLPF_CTL_REG, 0x1D }, { BLPF_THR1_REG, 0x05 }, |
| { BLPF_THR2_REG, 0x04 }, |
| /* Automatic white balance */ |
| { AWB_CTL1_REG, 0xFB }, { AWB_CTL2_REG, 0x26 }, |
| { AWB_RMAX_REG, 0x54 }, { AWB_RMIN_REG, 0x2B }, |
| { AWB_BMAX_REG, 0x57 }, { AWB_BMIN_REG, 0x29 }, |
| { AWB_RMAXB_REG, 0x50 }, { AWB_RMINB_REG, 0x43 }, |
| { AWB_BMAXB_REG, 0x30 }, { AWB_BMINB_REG, 0x22 }, |
| /* Auto exposure */ |
| { AE_CTL1_REG, 0x8C }, { AE_CTL2_REG, 0x04 }, |
| { AE_FRM_CTL_REG, 0x01 }, { AE_FINE_CTL_REG(0), 0x3F }, |
| { AE_FINE_CTL_REG(1), 0xA3 }, { AE_FINE_CTL_REG(3), 0x34 }, |
| /* Lens shading compensation */ |
| { LENS_CTRL_REG, 0x01 }, { LENS_XCEN_REG, 0x80 }, |
| { LENS_YCEN_REG, 0x70 }, { LENS_R_COMP_REG, 0x53 }, |
| { LENS_G_COMP_REG, 0x40 }, { LENS_B_COMP_REG, 0x3e }, |
| { REG_TERM, 0 }, |
| }; |
| |
| static inline struct sr030pc30_info *to_sr030pc30(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct sr030pc30_info, sd); |
| } |
| |
| static inline int set_i2c_page(struct sr030pc30_info *info, |
| struct i2c_client *client, unsigned int reg) |
| { |
| int ret = 0; |
| u32 page = reg >> 8 & 0xFF; |
| |
| if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) { |
| ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page); |
| if (!ret) |
| info->i2c_reg_page = page; |
| } |
| return ret; |
| } |
| |
| static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| |
| int ret = set_i2c_page(info, client, reg_addr); |
| if (!ret) |
| ret = i2c_smbus_read_byte_data(client, reg_addr & 0xFF); |
| return ret; |
| } |
| |
| static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| |
| int ret = set_i2c_page(info, client, reg_addr); |
| if (!ret) |
| ret = i2c_smbus_write_byte_data( |
| client, reg_addr & 0xFF, val); |
| return ret; |
| } |
| |
| static inline int sr030pc30_bulk_write_reg(struct v4l2_subdev *sd, |
| const struct i2c_regval *msg) |
| { |
| while (msg->addr != REG_TERM) { |
| int ret = cam_i2c_write(sd, msg->addr, msg->val); |
| if (ret) |
| return ret; |
| msg++; |
| } |
| return 0; |
| } |
| |
| /* Device reset and sleep mode control */ |
| static int sr030pc30_pwr_ctrl(struct v4l2_subdev *sd, |
| bool reset, bool sleep) |
| { |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| u8 reg = sleep ? 0xF1 : 0xF0; |
| int ret = 0; |
| |
| if (reset) |
| ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02); |
| if (!ret) { |
| ret = cam_i2c_write(sd, POWER_CTRL_REG, reg); |
| if (!ret) { |
| info->sleep = sleep; |
| if (reset) |
| info->i2c_reg_page = -1; |
| } |
| } |
| return ret; |
| } |
| |
| static inline int sr030pc30_enable_autoexposure(struct v4l2_subdev *sd, int on) |
| { |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| /* auto anti-flicker is also enabled here */ |
| int ret = cam_i2c_write(sd, AE_CTL1_REG, on ? 0xDC : 0x0C); |
| if (!ret) |
| info->auto_exp = on; |
| return ret; |
| } |
| |
| static int sr030pc30_set_exposure(struct v4l2_subdev *sd, int value) |
| { |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| |
| unsigned long expos = value * info->pdata->clk_rate / (8 * 1000); |
| |
| int ret = cam_i2c_write(sd, EXP_TIMEH_REG, expos >> 16 & 0xFF); |
| if (!ret) |
| ret = cam_i2c_write(sd, EXP_TIMEM_REG, expos >> 8 & 0xFF); |
| if (!ret) |
| ret = cam_i2c_write(sd, EXP_TIMEL_REG, expos & 0xFF); |
| if (!ret) { /* Turn off AE */ |
| info->exposure = value; |
| ret = sr030pc30_enable_autoexposure(sd, 0); |
| } |
| return ret; |
| } |
| |
| /* Automatic white balance control */ |
| static int sr030pc30_enable_autowhitebalance(struct v4l2_subdev *sd, int on) |
| { |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| |
| int ret = cam_i2c_write(sd, AWB_CTL2_REG, on ? 0x2E : 0x2F); |
| if (!ret) |
| ret = cam_i2c_write(sd, AWB_CTL1_REG, on ? 0xFB : 0x7B); |
| if (!ret) |
| info->auto_wb = on; |
| |
| return ret; |
| } |
| |
| static int sr030pc30_set_flip(struct v4l2_subdev *sd) |
| { |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| |
| s32 reg = cam_i2c_read(sd, VDO_CTL2_REG); |
| if (reg < 0) |
| return reg; |
| |
| reg &= 0x7C; |
| if (info->hflip) |
| reg |= 0x01; |
| if (info->vflip) |
| reg |= 0x02; |
| return cam_i2c_write(sd, VDO_CTL2_REG, reg | 0x80); |
| } |
| |
| /* Configure resolution, color format and image flip */ |
| static int sr030pc30_set_params(struct v4l2_subdev *sd) |
| { |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| int ret; |
| |
| if (!info->curr_win) |
| return -EINVAL; |
| |
| /* Configure the resolution through subsampling */ |
| ret = cam_i2c_write(sd, VDO_CTL1_REG, |
| info->curr_win->vid_ctl1); |
| |
| if (!ret && info->curr_fmt) |
| ret = cam_i2c_write(sd, ISP_CTL_REG(0), |
| info->curr_fmt->ispctl1_reg); |
| if (!ret) |
| ret = sr030pc30_set_flip(sd); |
| |
| return ret; |
| } |
| |
| /* Find nearest matching image pixel size. */ |
| static int sr030pc30_try_frame_size(struct v4l2_mbus_framefmt *mf) |
| { |
| unsigned int min_err = ~0; |
| int i = ARRAY_SIZE(sr030pc30_sizes); |
| const struct sr030pc30_frmsize *fsize = &sr030pc30_sizes[0], |
| *match = NULL; |
| while (i--) { |
| int err = abs(fsize->width - mf->width) |
| + abs(fsize->height - mf->height); |
| if (err < min_err) { |
| min_err = err; |
| match = fsize; |
| } |
| fsize++; |
| } |
| if (match) { |
| mf->width = match->width; |
| mf->height = match->height; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int sr030pc30_queryctrl(struct v4l2_subdev *sd, |
| struct v4l2_queryctrl *qc) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++) |
| if (qc->id == sr030pc30_ctrl[i].id) { |
| *qc = sr030pc30_ctrl[i]; |
| v4l2_dbg(1, debug, sd, "%s id: %d\n", |
| __func__, qc->id); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static inline int sr030pc30_set_bluebalance(struct v4l2_subdev *sd, int value) |
| { |
| int ret = cam_i2c_write(sd, MWB_BGAIN_REG, value); |
| if (!ret) |
| to_sr030pc30(sd)->blue_balance = value; |
| return ret; |
| } |
| |
| static inline int sr030pc30_set_redbalance(struct v4l2_subdev *sd, int value) |
| { |
| int ret = cam_i2c_write(sd, MWB_RGAIN_REG, value); |
| if (!ret) |
| to_sr030pc30(sd)->red_balance = value; |
| return ret; |
| } |
| |
| static int sr030pc30_s_ctrl(struct v4l2_subdev *sd, |
| struct v4l2_control *ctrl) |
| { |
| int i, ret = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++) |
| if (ctrl->id == sr030pc30_ctrl[i].id) |
| break; |
| |
| if (i == ARRAY_SIZE(sr030pc30_ctrl)) |
| return -EINVAL; |
| |
| if (ctrl->value < sr030pc30_ctrl[i].minimum || |
| ctrl->value > sr030pc30_ctrl[i].maximum) |
| return -ERANGE; |
| |
| v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n", |
| __func__, ctrl->id, ctrl->value); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUTO_WHITE_BALANCE: |
| sr030pc30_enable_autowhitebalance(sd, ctrl->value); |
| break; |
| case V4L2_CID_BLUE_BALANCE: |
| ret = sr030pc30_set_bluebalance(sd, ctrl->value); |
| break; |
| case V4L2_CID_RED_BALANCE: |
| ret = sr030pc30_set_redbalance(sd, ctrl->value); |
| break; |
| case V4L2_CID_EXPOSURE_AUTO: |
| sr030pc30_enable_autoexposure(sd, |
| ctrl->value == V4L2_EXPOSURE_AUTO); |
| break; |
| case V4L2_CID_EXPOSURE: |
| ret = sr030pc30_set_exposure(sd, ctrl->value); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int sr030pc30_g_ctrl(struct v4l2_subdev *sd, |
| struct v4l2_control *ctrl) |
| { |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| |
| v4l2_dbg(1, debug, sd, "%s: id: %d\n", __func__, ctrl->id); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUTO_WHITE_BALANCE: |
| ctrl->value = info->auto_wb; |
| break; |
| case V4L2_CID_BLUE_BALANCE: |
| ctrl->value = info->blue_balance; |
| break; |
| case V4L2_CID_RED_BALANCE: |
| ctrl->value = info->red_balance; |
| break; |
| case V4L2_CID_EXPOSURE_AUTO: |
| ctrl->value = info->auto_exp; |
| break; |
| case V4L2_CID_EXPOSURE: |
| ctrl->value = info->exposure; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int sr030pc30_enum_fmt(struct v4l2_subdev *sd, unsigned int index, |
| enum v4l2_mbus_pixelcode *code) |
| { |
| if (!code || index >= ARRAY_SIZE(sr030pc30_formats)) |
| return -EINVAL; |
| |
| *code = sr030pc30_formats[index].code; |
| return 0; |
| } |
| |
| static int sr030pc30_g_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| int ret; |
| |
| if (!mf) |
| return -EINVAL; |
| |
| if (!info->curr_win || !info->curr_fmt) { |
| ret = sr030pc30_set_params(sd); |
| if (ret) |
| return ret; |
| } |
| |
| mf->width = info->curr_win->width; |
| mf->height = info->curr_win->height; |
| mf->code = info->curr_fmt->code; |
| mf->colorspace = info->curr_fmt->colorspace; |
| mf->field = V4L2_FIELD_NONE; |
| |
| return 0; |
| } |
| |
| /* Return nearest media bus frame format. */ |
| static const struct sr030pc30_format *try_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| int i = ARRAY_SIZE(sr030pc30_formats); |
| |
| sr030pc30_try_frame_size(mf); |
| |
| while (i--) |
| if (mf->code == sr030pc30_formats[i].code) |
| break; |
| |
| mf->code = sr030pc30_formats[i].code; |
| |
| return &sr030pc30_formats[i]; |
| } |
| |
| /* Return nearest media bus frame format. */ |
| static int sr030pc30_try_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| if (!sd || !mf) |
| return -EINVAL; |
| |
| try_fmt(sd, mf); |
| return 0; |
| } |
| |
| static int sr030pc30_s_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| |
| if (!sd || !mf) |
| return -EINVAL; |
| |
| info->curr_fmt = try_fmt(sd, mf); |
| |
| return sr030pc30_set_params(sd); |
| } |
| |
| static int sr030pc30_base_config(struct v4l2_subdev *sd) |
| { |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| int ret; |
| unsigned long expmin, expmax; |
| |
| ret = sr030pc30_bulk_write_reg(sd, sr030pc30_base_regs); |
| if (!ret) { |
| info->curr_fmt = &sr030pc30_formats[0]; |
| info->curr_win = &sr030pc30_sizes[0]; |
| ret = sr030pc30_set_params(sd); |
| } |
| if (!ret) |
| ret = sr030pc30_pwr_ctrl(sd, false, false); |
| |
| if (!ret && !info->pdata) |
| return ret; |
| |
| expmin = EXPOS_MIN_MS * info->pdata->clk_rate / (8 * 1000); |
| expmax = EXPOS_MAX_MS * info->pdata->clk_rate / (8 * 1000); |
| |
| v4l2_dbg(1, debug, sd, "%s: expmin= %lx, expmax= %lx", __func__, |
| expmin, expmax); |
| |
| /* Setting up manual exposure time range */ |
| ret = cam_i2c_write(sd, EXP_MMINH_REG, expmin >> 8 & 0xFF); |
| if (!ret) |
| ret = cam_i2c_write(sd, EXP_MMINL_REG, expmin & 0xFF); |
| if (!ret) |
| ret = cam_i2c_write(sd, EXP_MMAXH_REG, expmax >> 16 & 0xFF); |
| if (!ret) |
| ret = cam_i2c_write(sd, EXP_MMAXM_REG, expmax >> 8 & 0xFF); |
| if (!ret) |
| ret = cam_i2c_write(sd, EXP_MMAXL_REG, expmax & 0xFF); |
| |
| return ret; |
| } |
| |
| static int sr030pc30_s_config(struct v4l2_subdev *sd, |
| int irq, void *platform_data) |
| { |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| |
| info->pdata = platform_data; |
| return 0; |
| } |
| |
| static int sr030pc30_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| return 0; |
| } |
| |
| static int sr030pc30_s_power(struct v4l2_subdev *sd, int on) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| const struct sr030pc30_platform_data *pdata = info->pdata; |
| int ret; |
| |
| if (WARN(pdata == NULL, "No platform data!")) |
| return -ENOMEM; |
| |
| /* |
| * Put sensor into power sleep mode before switching off |
| * power and disabling MCLK. |
| */ |
| if (!on) |
| sr030pc30_pwr_ctrl(sd, false, true); |
| |
| /* set_power controls sensor's power and clock */ |
| if (pdata->set_power) { |
| ret = pdata->set_power(&client->dev, on); |
| if (ret) |
| return ret; |
| } |
| |
| if (on) { |
| ret = sr030pc30_base_config(sd); |
| } else { |
| info->curr_win = NULL; |
| info->curr_fmt = NULL; |
| } |
| |
| return ret; |
| } |
| |
| static const struct v4l2_subdev_core_ops sr030pc30_core_ops = { |
| .s_config = sr030pc30_s_config, |
| .s_power = sr030pc30_s_power, |
| .queryctrl = sr030pc30_queryctrl, |
| .s_ctrl = sr030pc30_s_ctrl, |
| .g_ctrl = sr030pc30_g_ctrl, |
| }; |
| |
| static const struct v4l2_subdev_video_ops sr030pc30_video_ops = { |
| .s_stream = sr030pc30_s_stream, |
| .g_mbus_fmt = sr030pc30_g_fmt, |
| .s_mbus_fmt = sr030pc30_s_fmt, |
| .try_mbus_fmt = sr030pc30_try_fmt, |
| .enum_mbus_fmt = sr030pc30_enum_fmt, |
| }; |
| |
| static const struct v4l2_subdev_ops sr030pc30_ops = { |
| .core = &sr030pc30_core_ops, |
| .video = &sr030pc30_video_ops, |
| }; |
| |
| /* |
| * Detect sensor type. Return 0 if SR030PC30 was detected |
| * or -ENODEV otherwise. |
| */ |
| static int sr030pc30_detect(struct i2c_client *client) |
| { |
| const struct sr030pc30_platform_data *pdata |
| = client->dev.platform_data; |
| int ret; |
| |
| /* Enable sensor's power and clock */ |
| if (pdata->set_power) { |
| ret = pdata->set_power(&client->dev, 1); |
| if (ret) |
| return ret; |
| } |
| |
| ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG); |
| |
| if (pdata->set_power) |
| pdata->set_power(&client->dev, 0); |
| |
| if (ret < 0) { |
| dev_err(&client->dev, "%s: I2C read failed\n", __func__); |
| return ret; |
| } |
| |
| return ret == SR030PC30_ID ? 0 : -ENODEV; |
| } |
| |
| |
| static int sr030pc30_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct sr030pc30_info *info; |
| struct v4l2_subdev *sd; |
| const struct sr030pc30_platform_data *pdata |
| = client->dev.platform_data; |
| int ret; |
| |
| if (!pdata) { |
| dev_err(&client->dev, "No platform data!"); |
| return -EIO; |
| } |
| |
| ret = sr030pc30_detect(client); |
| if (ret) |
| return ret; |
| |
| info = kzalloc(sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| sd = &info->sd; |
| strcpy(sd->name, MODULE_NAME); |
| info->pdata = client->dev.platform_data; |
| |
| v4l2_i2c_subdev_init(sd, client, &sr030pc30_ops); |
| |
| info->i2c_reg_page = -1; |
| info->hflip = 1; |
| info->auto_exp = 1; |
| info->exposure = 30; |
| |
| return 0; |
| } |
| |
| static int sr030pc30_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct sr030pc30_info *info = to_sr030pc30(sd); |
| |
| v4l2_device_unregister_subdev(sd); |
| kfree(info); |
| return 0; |
| } |
| |
| static const struct i2c_device_id sr030pc30_id[] = { |
| { MODULE_NAME, 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, sr030pc30_id); |
| |
| |
| static struct i2c_driver sr030pc30_i2c_driver = { |
| .driver = { |
| .name = MODULE_NAME |
| }, |
| .probe = sr030pc30_probe, |
| .remove = sr030pc30_remove, |
| .id_table = sr030pc30_id, |
| }; |
| |
| static int __init sr030pc30_init(void) |
| { |
| return i2c_add_driver(&sr030pc30_i2c_driver); |
| } |
| |
| static void __exit sr030pc30_exit(void) |
| { |
| i2c_del_driver(&sr030pc30_i2c_driver); |
| } |
| |
| module_init(sr030pc30_init); |
| module_exit(sr030pc30_exit); |
| |
| MODULE_DESCRIPTION("Siliconfile SR030PC30 camera driver"); |
| MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); |
| MODULE_LICENSE("GPL"); |