| /* |
| * drivers/s390/cio/chsc.c |
| * S/390 common I/O routines -- channel subsystem call |
| * |
| * Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH, |
| * IBM Corporation |
| * Author(s): Ingo Adlung (adlung@de.ibm.com) |
| * Cornelia Huck (cornelia.huck@de.ibm.com) |
| * Arnd Bergmann (arndb@de.ibm.com) |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| |
| #include <asm/cio.h> |
| |
| #include "css.h" |
| #include "cio.h" |
| #include "cio_debug.h" |
| #include "ioasm.h" |
| #include "chsc.h" |
| |
| static void *sei_page; |
| |
| static int new_channel_path(int chpid); |
| |
| static inline void |
| set_chp_logically_online(int chp, int onoff) |
| { |
| css[0]->chps[chp]->state = onoff; |
| } |
| |
| static int |
| get_chp_status(int chp) |
| { |
| return (css[0]->chps[chp] ? css[0]->chps[chp]->state : -ENODEV); |
| } |
| |
| void |
| chsc_validate_chpids(struct subchannel *sch) |
| { |
| int mask, chp; |
| |
| for (chp = 0; chp <= 7; chp++) { |
| mask = 0x80 >> chp; |
| if (!get_chp_status(sch->schib.pmcw.chpid[chp])) |
| /* disable using this path */ |
| sch->opm &= ~mask; |
| } |
| } |
| |
| void |
| chpid_is_actually_online(int chp) |
| { |
| int state; |
| |
| state = get_chp_status(chp); |
| if (state < 0) { |
| need_rescan = 1; |
| queue_work(slow_path_wq, &slow_path_work); |
| } else |
| WARN_ON(!state); |
| } |
| |
| /* FIXME: this is _always_ called for every subchannel. shouldn't we |
| * process more than one at a time? */ |
| static int |
| chsc_get_sch_desc_irq(struct subchannel *sch, void *page) |
| { |
| int ccode, j; |
| |
| struct { |
| struct chsc_header request; |
| u16 reserved1a:10; |
| u16 ssid:2; |
| u16 reserved1b:4; |
| u16 f_sch; /* first subchannel */ |
| u16 reserved2; |
| u16 l_sch; /* last subchannel */ |
| u32 reserved3; |
| struct chsc_header response; |
| u32 reserved4; |
| u8 sch_valid : 1; |
| u8 dev_valid : 1; |
| u8 st : 3; /* subchannel type */ |
| u8 zeroes : 3; |
| u8 unit_addr; /* unit address */ |
| u16 devno; /* device number */ |
| u8 path_mask; |
| u8 fla_valid_mask; |
| u16 sch; /* subchannel */ |
| u8 chpid[8]; /* chpids 0-7 */ |
| u16 fla[8]; /* full link addresses 0-7 */ |
| } *ssd_area; |
| |
| ssd_area = page; |
| |
| ssd_area->request.length = 0x0010; |
| ssd_area->request.code = 0x0004; |
| |
| ssd_area->ssid = sch->schid.ssid; |
| ssd_area->f_sch = sch->schid.sch_no; |
| ssd_area->l_sch = sch->schid.sch_no; |
| |
| ccode = chsc(ssd_area); |
| if (ccode > 0) { |
| pr_debug("chsc returned with ccode = %d\n", ccode); |
| return (ccode == 3) ? -ENODEV : -EBUSY; |
| } |
| |
| switch (ssd_area->response.code) { |
| case 0x0001: /* everything ok */ |
| break; |
| case 0x0002: |
| CIO_CRW_EVENT(2, "Invalid command!\n"); |
| return -EINVAL; |
| case 0x0003: |
| CIO_CRW_EVENT(2, "Error in chsc request block!\n"); |
| return -EINVAL; |
| case 0x0004: |
| CIO_CRW_EVENT(2, "Model does not provide ssd\n"); |
| return -EOPNOTSUPP; |
| default: |
| CIO_CRW_EVENT(2, "Unknown CHSC response %d\n", |
| ssd_area->response.code); |
| return -EIO; |
| } |
| |
| /* |
| * ssd_area->st stores the type of the detected |
| * subchannel, with the following definitions: |
| * |
| * 0: I/O subchannel: All fields have meaning |
| * 1: CHSC subchannel: Only sch_val, st and sch |
| * have meaning |
| * 2: Message subchannel: All fields except unit_addr |
| * have meaning |
| * 3: ADM subchannel: Only sch_val, st and sch |
| * have meaning |
| * |
| * Other types are currently undefined. |
| */ |
| if (ssd_area->st > 3) { /* uhm, that looks strange... */ |
| CIO_CRW_EVENT(0, "Strange subchannel type %d" |
| " for sch 0.%x.%04x\n", ssd_area->st, |
| sch->schid.ssid, sch->schid.sch_no); |
| /* |
| * There may have been a new subchannel type defined in the |
| * time since this code was written; since we don't know which |
| * fields have meaning and what to do with it we just jump out |
| */ |
| return 0; |
| } else { |
| const char *type[4] = {"I/O", "chsc", "message", "ADM"}; |
| CIO_CRW_EVENT(6, "ssd: sch 0.%x.%04x is %s subchannel\n", |
| sch->schid.ssid, sch->schid.sch_no, |
| type[ssd_area->st]); |
| |
| sch->ssd_info.valid = 1; |
| sch->ssd_info.type = ssd_area->st; |
| } |
| |
| if (ssd_area->st == 0 || ssd_area->st == 2) { |
| for (j = 0; j < 8; j++) { |
| if (!((0x80 >> j) & ssd_area->path_mask & |
| ssd_area->fla_valid_mask)) |
| continue; |
| sch->ssd_info.chpid[j] = ssd_area->chpid[j]; |
| sch->ssd_info.fla[j] = ssd_area->fla[j]; |
| } |
| } |
| return 0; |
| } |
| |
| int |
| css_get_ssd_info(struct subchannel *sch) |
| { |
| int ret; |
| void *page; |
| |
| page = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!page) |
| return -ENOMEM; |
| spin_lock_irq(&sch->lock); |
| ret = chsc_get_sch_desc_irq(sch, page); |
| if (ret) { |
| static int cio_chsc_err_msg; |
| |
| if (!cio_chsc_err_msg) { |
| printk(KERN_ERR |
| "chsc_get_sch_descriptions:" |
| " Error %d while doing chsc; " |
| "processing some machine checks may " |
| "not work\n", ret); |
| cio_chsc_err_msg = 1; |
| } |
| } |
| spin_unlock_irq(&sch->lock); |
| free_page((unsigned long)page); |
| if (!ret) { |
| int j, chpid; |
| /* Allocate channel path structures, if needed. */ |
| for (j = 0; j < 8; j++) { |
| chpid = sch->ssd_info.chpid[j]; |
| if (chpid && (get_chp_status(chpid) < 0)) |
| new_channel_path(chpid); |
| } |
| } |
| return ret; |
| } |
| |
| static int |
| s390_subchannel_remove_chpid(struct device *dev, void *data) |
| { |
| int j; |
| int mask; |
| struct subchannel *sch; |
| struct channel_path *chpid; |
| struct schib schib; |
| |
| sch = to_subchannel(dev); |
| chpid = data; |
| for (j = 0; j < 8; j++) |
| if (sch->schib.pmcw.chpid[j] == chpid->id) |
| break; |
| if (j >= 8) |
| return 0; |
| |
| mask = 0x80 >> j; |
| spin_lock_irq(&sch->lock); |
| |
| stsch(sch->schid, &schib); |
| if (!schib.pmcw.dnv) |
| goto out_unreg; |
| memcpy(&sch->schib, &schib, sizeof(struct schib)); |
| /* Check for single path devices. */ |
| if (sch->schib.pmcw.pim == 0x80) |
| goto out_unreg; |
| if (sch->vpm == mask) |
| goto out_unreg; |
| |
| if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) && |
| (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) && |
| (sch->schib.pmcw.lpum == mask)) { |
| int cc; |
| |
| cc = cio_clear(sch); |
| if (cc == -ENODEV) |
| goto out_unreg; |
| /* Call handler. */ |
| if (sch->driver && sch->driver->termination) |
| sch->driver->termination(&sch->dev); |
| goto out_unlock; |
| } |
| |
| /* trigger path verification. */ |
| if (sch->driver && sch->driver->verify) |
| sch->driver->verify(&sch->dev); |
| out_unlock: |
| spin_unlock_irq(&sch->lock); |
| return 0; |
| out_unreg: |
| spin_unlock_irq(&sch->lock); |
| sch->lpm = 0; |
| if (css_enqueue_subchannel_slow(sch->schid)) { |
| css_clear_subchannel_slow_list(); |
| need_rescan = 1; |
| } |
| return 0; |
| } |
| |
| static inline void |
| s390_set_chpid_offline( __u8 chpid) |
| { |
| char dbf_txt[15]; |
| struct device *dev; |
| |
| sprintf(dbf_txt, "chpr%x", chpid); |
| CIO_TRACE_EVENT(2, dbf_txt); |
| |
| if (get_chp_status(chpid) <= 0) |
| return; |
| dev = get_device(&css[0]->chps[chpid]->dev); |
| bus_for_each_dev(&css_bus_type, NULL, to_channelpath(dev), |
| s390_subchannel_remove_chpid); |
| |
| if (need_rescan || css_slow_subchannels_exist()) |
| queue_work(slow_path_wq, &slow_path_work); |
| put_device(dev); |
| } |
| |
| struct res_acc_data { |
| struct channel_path *chp; |
| u32 fla_mask; |
| u16 fla; |
| }; |
| |
| static int |
| s390_process_res_acc_sch(struct res_acc_data *res_data, struct subchannel *sch) |
| { |
| int found; |
| int chp; |
| int ccode; |
| |
| found = 0; |
| for (chp = 0; chp <= 7; chp++) |
| /* |
| * check if chpid is in information updated by ssd |
| */ |
| if (sch->ssd_info.valid && |
| sch->ssd_info.chpid[chp] == res_data->chp->id && |
| (sch->ssd_info.fla[chp] & res_data->fla_mask) |
| == res_data->fla) { |
| found = 1; |
| break; |
| } |
| |
| if (found == 0) |
| return 0; |
| |
| /* |
| * Do a stsch to update our subchannel structure with the |
| * new path information and eventually check for logically |
| * offline chpids. |
| */ |
| ccode = stsch(sch->schid, &sch->schib); |
| if (ccode > 0) |
| return 0; |
| |
| return 0x80 >> chp; |
| } |
| |
| static inline int |
| s390_process_res_acc_new_sch(struct subchannel_id schid) |
| { |
| struct schib schib; |
| int ret; |
| /* |
| * We don't know the device yet, but since a path |
| * may be available now to the device we'll have |
| * to do recognition again. |
| * Since we don't have any idea about which chpid |
| * that beast may be on we'll have to do a stsch |
| * on all devices, grr... |
| */ |
| if (stsch_err(schid, &schib)) |
| /* We're through */ |
| return need_rescan ? -EAGAIN : -ENXIO; |
| |
| /* Put it on the slow path. */ |
| ret = css_enqueue_subchannel_slow(schid); |
| if (ret) { |
| css_clear_subchannel_slow_list(); |
| need_rescan = 1; |
| return -EAGAIN; |
| } |
| return 0; |
| } |
| |
| static int |
| __s390_process_res_acc(struct subchannel_id schid, void *data) |
| { |
| int chp_mask, old_lpm; |
| struct res_acc_data *res_data; |
| struct subchannel *sch; |
| |
| res_data = (struct res_acc_data *)data; |
| sch = get_subchannel_by_schid(schid); |
| if (!sch) |
| /* Check if a subchannel is newly available. */ |
| return s390_process_res_acc_new_sch(schid); |
| |
| spin_lock_irq(&sch->lock); |
| |
| chp_mask = s390_process_res_acc_sch(res_data, sch); |
| |
| if (chp_mask == 0) { |
| spin_unlock_irq(&sch->lock); |
| return 0; |
| } |
| old_lpm = sch->lpm; |
| sch->lpm = ((sch->schib.pmcw.pim & |
| sch->schib.pmcw.pam & |
| sch->schib.pmcw.pom) |
| | chp_mask) & sch->opm; |
| if (!old_lpm && sch->lpm) |
| device_trigger_reprobe(sch); |
| else if (sch->driver && sch->driver->verify) |
| sch->driver->verify(&sch->dev); |
| |
| spin_unlock_irq(&sch->lock); |
| put_device(&sch->dev); |
| return (res_data->fla_mask == 0xffff) ? -ENODEV : 0; |
| } |
| |
| |
| static int |
| s390_process_res_acc (struct res_acc_data *res_data) |
| { |
| int rc; |
| char dbf_txt[15]; |
| |
| sprintf(dbf_txt, "accpr%x", res_data->chp->id); |
| CIO_TRACE_EVENT( 2, dbf_txt); |
| if (res_data->fla != 0) { |
| sprintf(dbf_txt, "fla%x", res_data->fla); |
| CIO_TRACE_EVENT( 2, dbf_txt); |
| } |
| |
| /* |
| * I/O resources may have become accessible. |
| * Scan through all subchannels that may be concerned and |
| * do a validation on those. |
| * The more information we have (info), the less scanning |
| * will we have to do. |
| */ |
| rc = for_each_subchannel(__s390_process_res_acc, res_data); |
| if (css_slow_subchannels_exist()) |
| rc = -EAGAIN; |
| else if (rc != -EAGAIN) |
| rc = 0; |
| return rc; |
| } |
| |
| static int |
| __get_chpid_from_lir(void *data) |
| { |
| struct lir { |
| u8 iq; |
| u8 ic; |
| u16 sci; |
| /* incident-node descriptor */ |
| u32 indesc[28]; |
| /* attached-node descriptor */ |
| u32 andesc[28]; |
| /* incident-specific information */ |
| u32 isinfo[28]; |
| } *lir; |
| |
| lir = (struct lir*) data; |
| if (!(lir->iq&0x80)) |
| /* NULL link incident record */ |
| return -EINVAL; |
| if (!(lir->indesc[0]&0xc0000000)) |
| /* node descriptor not valid */ |
| return -EINVAL; |
| if (!(lir->indesc[0]&0x10000000)) |
| /* don't handle device-type nodes - FIXME */ |
| return -EINVAL; |
| /* Byte 3 contains the chpid. Could also be CTCA, but we don't care */ |
| |
| return (u16) (lir->indesc[0]&0x000000ff); |
| } |
| |
| int |
| chsc_process_crw(void) |
| { |
| int chpid, ret; |
| struct res_acc_data res_data; |
| struct { |
| struct chsc_header request; |
| u32 reserved1; |
| u32 reserved2; |
| u32 reserved3; |
| struct chsc_header response; |
| u32 reserved4; |
| u8 flags; |
| u8 vf; /* validity flags */ |
| u8 rs; /* reporting source */ |
| u8 cc; /* content code */ |
| u16 fla; /* full link address */ |
| u16 rsid; /* reporting source id */ |
| u32 reserved5; |
| u32 reserved6; |
| u32 ccdf[96]; /* content-code dependent field */ |
| /* ccdf has to be big enough for a link-incident record */ |
| } *sei_area; |
| |
| if (!sei_page) |
| return 0; |
| /* |
| * build the chsc request block for store event information |
| * and do the call |
| * This function is only called by the machine check handler thread, |
| * so we don't need locking for the sei_page. |
| */ |
| sei_area = sei_page; |
| |
| CIO_TRACE_EVENT( 2, "prcss"); |
| ret = 0; |
| do { |
| int ccode, status; |
| struct device *dev; |
| memset(sei_area, 0, sizeof(*sei_area)); |
| memset(&res_data, 0, sizeof(struct res_acc_data)); |
| sei_area->request.length = 0x0010; |
| sei_area->request.code = 0x000e; |
| |
| ccode = chsc(sei_area); |
| if (ccode > 0) |
| return 0; |
| |
| switch (sei_area->response.code) { |
| /* for debug purposes, check for problems */ |
| case 0x0001: |
| CIO_CRW_EVENT(4, "chsc_process_crw: event information " |
| "successfully stored\n"); |
| break; /* everything ok */ |
| case 0x0002: |
| CIO_CRW_EVENT(2, |
| "chsc_process_crw: invalid command!\n"); |
| return 0; |
| case 0x0003: |
| CIO_CRW_EVENT(2, "chsc_process_crw: error in chsc " |
| "request block!\n"); |
| return 0; |
| case 0x0005: |
| CIO_CRW_EVENT(2, "chsc_process_crw: no event " |
| "information stored\n"); |
| return 0; |
| default: |
| CIO_CRW_EVENT(2, "chsc_process_crw: chsc response %d\n", |
| sei_area->response.code); |
| return 0; |
| } |
| |
| /* Check if we might have lost some information. */ |
| if (sei_area->flags & 0x40) |
| CIO_CRW_EVENT(2, "chsc_process_crw: Event information " |
| "has been lost due to overflow!\n"); |
| |
| if (sei_area->rs != 4) { |
| CIO_CRW_EVENT(2, "chsc_process_crw: reporting source " |
| "(%04X) isn't a chpid!\n", |
| sei_area->rsid); |
| continue; |
| } |
| |
| /* which kind of information was stored? */ |
| switch (sei_area->cc) { |
| case 1: /* link incident*/ |
| CIO_CRW_EVENT(4, "chsc_process_crw: " |
| "channel subsystem reports link incident," |
| " reporting source is chpid %x\n", |
| sei_area->rsid); |
| chpid = __get_chpid_from_lir(sei_area->ccdf); |
| if (chpid < 0) |
| CIO_CRW_EVENT(4, "%s: Invalid LIR, skipping\n", |
| __FUNCTION__); |
| else |
| s390_set_chpid_offline(chpid); |
| break; |
| |
| case 2: /* i/o resource accessibiliy */ |
| CIO_CRW_EVENT(4, "chsc_process_crw: " |
| "channel subsystem reports some I/O " |
| "devices may have become accessible\n"); |
| pr_debug("Data received after sei: \n"); |
| pr_debug("Validity flags: %x\n", sei_area->vf); |
| |
| /* allocate a new channel path structure, if needed */ |
| status = get_chp_status(sei_area->rsid); |
| if (status < 0) |
| new_channel_path(sei_area->rsid); |
| else if (!status) |
| break; |
| dev = get_device(&css[0]->chps[sei_area->rsid]->dev); |
| res_data.chp = to_channelpath(dev); |
| pr_debug("chpid: %x", sei_area->rsid); |
| if ((sei_area->vf & 0xc0) != 0) { |
| res_data.fla = sei_area->fla; |
| if ((sei_area->vf & 0xc0) == 0xc0) { |
| pr_debug(" full link addr: %x", |
| sei_area->fla); |
| res_data.fla_mask = 0xffff; |
| } else { |
| pr_debug(" link addr: %x", |
| sei_area->fla); |
| res_data.fla_mask = 0xff00; |
| } |
| } |
| ret = s390_process_res_acc(&res_data); |
| pr_debug("\n\n"); |
| put_device(dev); |
| break; |
| |
| default: /* other stuff */ |
| CIO_CRW_EVENT(4, "chsc_process_crw: event %d\n", |
| sei_area->cc); |
| break; |
| } |
| } while (sei_area->flags & 0x80); |
| return ret; |
| } |
| |
| static inline int |
| __chp_add_new_sch(struct subchannel_id schid) |
| { |
| struct schib schib; |
| int ret; |
| |
| if (stsch(schid, &schib)) |
| /* We're through */ |
| return need_rescan ? -EAGAIN : -ENXIO; |
| |
| /* Put it on the slow path. */ |
| ret = css_enqueue_subchannel_slow(schid); |
| if (ret) { |
| css_clear_subchannel_slow_list(); |
| need_rescan = 1; |
| return -EAGAIN; |
| } |
| return 0; |
| } |
| |
| |
| static int |
| __chp_add(struct subchannel_id schid, void *data) |
| { |
| int i; |
| struct channel_path *chp; |
| struct subchannel *sch; |
| |
| chp = (struct channel_path *)data; |
| sch = get_subchannel_by_schid(schid); |
| if (!sch) |
| /* Check if the subchannel is now available. */ |
| return __chp_add_new_sch(schid); |
| spin_lock_irq(&sch->lock); |
| for (i=0; i<8; i++) |
| if (sch->schib.pmcw.chpid[i] == chp->id) { |
| if (stsch(sch->schid, &sch->schib) != 0) { |
| /* Endgame. */ |
| spin_unlock_irq(&sch->lock); |
| return -ENXIO; |
| } |
| break; |
| } |
| if (i==8) { |
| spin_unlock_irq(&sch->lock); |
| return 0; |
| } |
| sch->lpm = ((sch->schib.pmcw.pim & |
| sch->schib.pmcw.pam & |
| sch->schib.pmcw.pom) |
| | 0x80 >> i) & sch->opm; |
| |
| if (sch->driver && sch->driver->verify) |
| sch->driver->verify(&sch->dev); |
| |
| spin_unlock_irq(&sch->lock); |
| put_device(&sch->dev); |
| return 0; |
| } |
| |
| static int |
| chp_add(int chpid) |
| { |
| int rc; |
| char dbf_txt[15]; |
| struct device *dev; |
| |
| if (!get_chp_status(chpid)) |
| return 0; /* no need to do the rest */ |
| |
| sprintf(dbf_txt, "cadd%x", chpid); |
| CIO_TRACE_EVENT(2, dbf_txt); |
| |
| dev = get_device(&css[0]->chps[chpid]->dev); |
| rc = for_each_subchannel(__chp_add, to_channelpath(dev)); |
| if (css_slow_subchannels_exist()) |
| rc = -EAGAIN; |
| if (rc != -EAGAIN) |
| rc = 0; |
| put_device(dev); |
| return rc; |
| } |
| |
| /* |
| * Handling of crw machine checks with channel path source. |
| */ |
| int |
| chp_process_crw(int chpid, int on) |
| { |
| if (on == 0) { |
| /* Path has gone. We use the link incident routine.*/ |
| s390_set_chpid_offline(chpid); |
| return 0; /* De-register is async anyway. */ |
| } |
| /* |
| * Path has come. Allocate a new channel path structure, |
| * if needed. |
| */ |
| if (get_chp_status(chpid) < 0) |
| new_channel_path(chpid); |
| /* Avoid the extra overhead in process_rec_acc. */ |
| return chp_add(chpid); |
| } |
| |
| static inline int |
| __check_for_io_and_kill(struct subchannel *sch, int index) |
| { |
| int cc; |
| |
| if (!device_is_online(sch)) |
| /* cio could be doing I/O. */ |
| return 0; |
| cc = stsch(sch->schid, &sch->schib); |
| if (cc) |
| return 0; |
| if (sch->schib.scsw.actl && sch->schib.pmcw.lpum == (0x80 >> index)) { |
| device_set_waiting(sch); |
| return 1; |
| } |
| return 0; |
| } |
| |
| static inline void |
| __s390_subchannel_vary_chpid(struct subchannel *sch, __u8 chpid, int on) |
| { |
| int chp, old_lpm; |
| unsigned long flags; |
| |
| if (!sch->ssd_info.valid) |
| return; |
| |
| spin_lock_irqsave(&sch->lock, flags); |
| old_lpm = sch->lpm; |
| for (chp = 0; chp < 8; chp++) { |
| if (sch->ssd_info.chpid[chp] != chpid) |
| continue; |
| |
| if (on) { |
| sch->opm |= (0x80 >> chp); |
| sch->lpm |= (0x80 >> chp); |
| if (!old_lpm) |
| device_trigger_reprobe(sch); |
| else if (sch->driver && sch->driver->verify) |
| sch->driver->verify(&sch->dev); |
| } else { |
| sch->opm &= ~(0x80 >> chp); |
| sch->lpm &= ~(0x80 >> chp); |
| /* |
| * Give running I/O a grace period in which it |
| * can successfully terminate, even using the |
| * just varied off path. Then kill it. |
| */ |
| if (!__check_for_io_and_kill(sch, chp) && !sch->lpm) { |
| if (css_enqueue_subchannel_slow(sch->schid)) { |
| css_clear_subchannel_slow_list(); |
| need_rescan = 1; |
| } |
| } else if (sch->driver && sch->driver->verify) |
| sch->driver->verify(&sch->dev); |
| } |
| break; |
| } |
| spin_unlock_irqrestore(&sch->lock, flags); |
| } |
| |
| static int |
| s390_subchannel_vary_chpid_off(struct device *dev, void *data) |
| { |
| struct subchannel *sch; |
| __u8 *chpid; |
| |
| sch = to_subchannel(dev); |
| chpid = data; |
| |
| __s390_subchannel_vary_chpid(sch, *chpid, 0); |
| return 0; |
| } |
| |
| static int |
| s390_subchannel_vary_chpid_on(struct device *dev, void *data) |
| { |
| struct subchannel *sch; |
| __u8 *chpid; |
| |
| sch = to_subchannel(dev); |
| chpid = data; |
| |
| __s390_subchannel_vary_chpid(sch, *chpid, 1); |
| return 0; |
| } |
| |
| static int |
| __s390_vary_chpid_on(struct subchannel_id schid, void *data) |
| { |
| struct schib schib; |
| struct subchannel *sch; |
| |
| sch = get_subchannel_by_schid(schid); |
| if (sch) { |
| put_device(&sch->dev); |
| return 0; |
| } |
| if (stsch_err(schid, &schib)) |
| /* We're through */ |
| return -ENXIO; |
| /* Put it on the slow path. */ |
| if (css_enqueue_subchannel_slow(schid)) { |
| css_clear_subchannel_slow_list(); |
| need_rescan = 1; |
| return -EAGAIN; |
| } |
| return 0; |
| } |
| |
| /* |
| * Function: s390_vary_chpid |
| * Varies the specified chpid online or offline |
| */ |
| static int |
| s390_vary_chpid( __u8 chpid, int on) |
| { |
| char dbf_text[15]; |
| int status; |
| |
| sprintf(dbf_text, on?"varyon%x":"varyoff%x", chpid); |
| CIO_TRACE_EVENT( 2, dbf_text); |
| |
| status = get_chp_status(chpid); |
| if (status < 0) { |
| printk(KERN_ERR "Can't vary unknown chpid %02X\n", chpid); |
| return -EINVAL; |
| } |
| |
| if (!on && !status) { |
| printk(KERN_ERR "chpid %x is already offline\n", chpid); |
| return -EINVAL; |
| } |
| |
| set_chp_logically_online(chpid, on); |
| |
| /* |
| * Redo PathVerification on the devices the chpid connects to |
| */ |
| |
| bus_for_each_dev(&css_bus_type, NULL, &chpid, on ? |
| s390_subchannel_vary_chpid_on : |
| s390_subchannel_vary_chpid_off); |
| if (on) |
| /* Scan for new devices on varied on path. */ |
| for_each_subchannel(__s390_vary_chpid_on, NULL); |
| if (need_rescan || css_slow_subchannels_exist()) |
| queue_work(slow_path_wq, &slow_path_work); |
| return 0; |
| } |
| |
| /* |
| * Channel measurement related functions |
| */ |
| static ssize_t |
| chp_measurement_chars_read(struct kobject *kobj, char *buf, loff_t off, |
| size_t count) |
| { |
| struct channel_path *chp; |
| unsigned int size; |
| |
| chp = to_channelpath(container_of(kobj, struct device, kobj)); |
| if (!chp->cmg_chars) |
| return 0; |
| |
| size = sizeof(struct cmg_chars); |
| |
| if (off > size) |
| return 0; |
| if (off + count > size) |
| count = size - off; |
| memcpy(buf, chp->cmg_chars + off, count); |
| return count; |
| } |
| |
| static struct bin_attribute chp_measurement_chars_attr = { |
| .attr = { |
| .name = "measurement_chars", |
| .mode = S_IRUSR, |
| .owner = THIS_MODULE, |
| }, |
| .size = sizeof(struct cmg_chars), |
| .read = chp_measurement_chars_read, |
| }; |
| |
| static void |
| chp_measurement_copy_block(struct cmg_entry *buf, |
| struct channel_subsystem *css, int chpid) |
| { |
| void *area; |
| struct cmg_entry *entry, reference_buf; |
| int idx; |
| |
| if (chpid < 128) { |
| area = css->cub_addr1; |
| idx = chpid; |
| } else { |
| area = css->cub_addr2; |
| idx = chpid - 128; |
| } |
| entry = area + (idx * sizeof(struct cmg_entry)); |
| do { |
| memcpy(buf, entry, sizeof(*entry)); |
| memcpy(&reference_buf, entry, sizeof(*entry)); |
| } while (reference_buf.values[0] != buf->values[0]); |
| } |
| |
| static ssize_t |
| chp_measurement_read(struct kobject *kobj, char *buf, loff_t off, size_t count) |
| { |
| struct channel_path *chp; |
| struct channel_subsystem *css; |
| unsigned int size; |
| |
| chp = to_channelpath(container_of(kobj, struct device, kobj)); |
| css = to_css(chp->dev.parent); |
| |
| size = sizeof(struct cmg_entry); |
| |
| /* Only allow single reads. */ |
| if (off || count < size) |
| return 0; |
| chp_measurement_copy_block((struct cmg_entry *)buf, css, chp->id); |
| count = size; |
| return count; |
| } |
| |
| static struct bin_attribute chp_measurement_attr = { |
| .attr = { |
| .name = "measurement", |
| .mode = S_IRUSR, |
| .owner = THIS_MODULE, |
| }, |
| .size = sizeof(struct cmg_entry), |
| .read = chp_measurement_read, |
| }; |
| |
| static void |
| chsc_remove_chp_cmg_attr(struct channel_path *chp) |
| { |
| sysfs_remove_bin_file(&chp->dev.kobj, &chp_measurement_chars_attr); |
| sysfs_remove_bin_file(&chp->dev.kobj, &chp_measurement_attr); |
| } |
| |
| static int |
| chsc_add_chp_cmg_attr(struct channel_path *chp) |
| { |
| int ret; |
| |
| ret = sysfs_create_bin_file(&chp->dev.kobj, |
| &chp_measurement_chars_attr); |
| if (ret) |
| return ret; |
| ret = sysfs_create_bin_file(&chp->dev.kobj, &chp_measurement_attr); |
| if (ret) |
| sysfs_remove_bin_file(&chp->dev.kobj, |
| &chp_measurement_chars_attr); |
| return ret; |
| } |
| |
| static void |
| chsc_remove_cmg_attr(struct channel_subsystem *css) |
| { |
| int i; |
| |
| for (i = 0; i <= __MAX_CHPID; i++) { |
| if (!css->chps[i]) |
| continue; |
| chsc_remove_chp_cmg_attr(css->chps[i]); |
| } |
| } |
| |
| static int |
| chsc_add_cmg_attr(struct channel_subsystem *css) |
| { |
| int i, ret; |
| |
| ret = 0; |
| for (i = 0; i <= __MAX_CHPID; i++) { |
| if (!css->chps[i]) |
| continue; |
| ret = chsc_add_chp_cmg_attr(css->chps[i]); |
| if (ret) |
| goto cleanup; |
| } |
| return ret; |
| cleanup: |
| for (--i; i >= 0; i--) { |
| if (!css->chps[i]) |
| continue; |
| chsc_remove_chp_cmg_attr(css->chps[i]); |
| } |
| return ret; |
| } |
| |
| |
| static int |
| __chsc_do_secm(struct channel_subsystem *css, int enable, void *page) |
| { |
| struct { |
| struct chsc_header request; |
| u32 operation_code : 2; |
| u32 : 30; |
| u32 key : 4; |
| u32 : 28; |
| u32 zeroes1; |
| u32 cub_addr1; |
| u32 zeroes2; |
| u32 cub_addr2; |
| u32 reserved[13]; |
| struct chsc_header response; |
| u32 status : 8; |
| u32 : 4; |
| u32 fmt : 4; |
| u32 : 16; |
| } *secm_area; |
| int ret, ccode; |
| |
| secm_area = page; |
| secm_area->request.length = 0x0050; |
| secm_area->request.code = 0x0016; |
| |
| secm_area->key = PAGE_DEFAULT_KEY; |
| secm_area->cub_addr1 = (u64)(unsigned long)css->cub_addr1; |
| secm_area->cub_addr2 = (u64)(unsigned long)css->cub_addr2; |
| |
| secm_area->operation_code = enable ? 0 : 1; |
| |
| ccode = chsc(secm_area); |
| if (ccode > 0) |
| return (ccode == 3) ? -ENODEV : -EBUSY; |
| |
| switch (secm_area->response.code) { |
| case 0x0001: /* Success. */ |
| ret = 0; |
| break; |
| case 0x0003: /* Invalid block. */ |
| case 0x0007: /* Invalid format. */ |
| case 0x0008: /* Other invalid block. */ |
| CIO_CRW_EVENT(2, "Error in chsc request block!\n"); |
| ret = -EINVAL; |
| break; |
| case 0x0004: /* Command not provided in model. */ |
| CIO_CRW_EVENT(2, "Model does not provide secm\n"); |
| ret = -EOPNOTSUPP; |
| break; |
| case 0x0102: /* cub adresses incorrect */ |
| CIO_CRW_EVENT(2, "Invalid addresses in chsc request block\n"); |
| ret = -EINVAL; |
| break; |
| case 0x0103: /* key error */ |
| CIO_CRW_EVENT(2, "Access key error in secm\n"); |
| ret = -EINVAL; |
| break; |
| case 0x0105: /* error while starting */ |
| CIO_CRW_EVENT(2, "Error while starting channel measurement\n"); |
| ret = -EIO; |
| break; |
| default: |
| CIO_CRW_EVENT(2, "Unknown CHSC response %d\n", |
| secm_area->response.code); |
| ret = -EIO; |
| } |
| return ret; |
| } |
| |
| int |
| chsc_secm(struct channel_subsystem *css, int enable) |
| { |
| void *secm_area; |
| int ret; |
| |
| secm_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!secm_area) |
| return -ENOMEM; |
| |
| mutex_lock(&css->mutex); |
| if (enable && !css->cm_enabled) { |
| css->cub_addr1 = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| css->cub_addr2 = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!css->cub_addr1 || !css->cub_addr2) { |
| free_page((unsigned long)css->cub_addr1); |
| free_page((unsigned long)css->cub_addr2); |
| free_page((unsigned long)secm_area); |
| mutex_unlock(&css->mutex); |
| return -ENOMEM; |
| } |
| } |
| ret = __chsc_do_secm(css, enable, secm_area); |
| if (!ret) { |
| css->cm_enabled = enable; |
| if (css->cm_enabled) { |
| ret = chsc_add_cmg_attr(css); |
| if (ret) { |
| memset(secm_area, 0, PAGE_SIZE); |
| __chsc_do_secm(css, 0, secm_area); |
| css->cm_enabled = 0; |
| } |
| } else |
| chsc_remove_cmg_attr(css); |
| } |
| if (enable && !css->cm_enabled) { |
| free_page((unsigned long)css->cub_addr1); |
| free_page((unsigned long)css->cub_addr2); |
| } |
| mutex_unlock(&css->mutex); |
| free_page((unsigned long)secm_area); |
| return ret; |
| } |
| |
| /* |
| * Files for the channel path entries. |
| */ |
| static ssize_t |
| chp_status_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct channel_path *chp = container_of(dev, struct channel_path, dev); |
| |
| if (!chp) |
| return 0; |
| return (get_chp_status(chp->id) ? sprintf(buf, "online\n") : |
| sprintf(buf, "offline\n")); |
| } |
| |
| static ssize_t |
| chp_status_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct channel_path *cp = container_of(dev, struct channel_path, dev); |
| char cmd[10]; |
| int num_args; |
| int error; |
| |
| num_args = sscanf(buf, "%5s", cmd); |
| if (!num_args) |
| return count; |
| |
| if (!strnicmp(cmd, "on", 2)) |
| error = s390_vary_chpid(cp->id, 1); |
| else if (!strnicmp(cmd, "off", 3)) |
| error = s390_vary_chpid(cp->id, 0); |
| else |
| error = -EINVAL; |
| |
| return error < 0 ? error : count; |
| |
| } |
| |
| static DEVICE_ATTR(status, 0644, chp_status_show, chp_status_write); |
| |
| static ssize_t |
| chp_type_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct channel_path *chp = container_of(dev, struct channel_path, dev); |
| |
| if (!chp) |
| return 0; |
| return sprintf(buf, "%x\n", chp->desc.desc); |
| } |
| |
| static DEVICE_ATTR(type, 0444, chp_type_show, NULL); |
| |
| static ssize_t |
| chp_cmg_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct channel_path *chp = to_channelpath(dev); |
| |
| if (!chp) |
| return 0; |
| if (chp->cmg == -1) /* channel measurements not available */ |
| return sprintf(buf, "unknown\n"); |
| return sprintf(buf, "%x\n", chp->cmg); |
| } |
| |
| static DEVICE_ATTR(cmg, 0444, chp_cmg_show, NULL); |
| |
| static ssize_t |
| chp_shared_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct channel_path *chp = to_channelpath(dev); |
| |
| if (!chp) |
| return 0; |
| if (chp->shared == -1) /* channel measurements not available */ |
| return sprintf(buf, "unknown\n"); |
| return sprintf(buf, "%x\n", chp->shared); |
| } |
| |
| static DEVICE_ATTR(shared, 0444, chp_shared_show, NULL); |
| |
| static struct attribute * chp_attrs[] = { |
| &dev_attr_status.attr, |
| &dev_attr_type.attr, |
| &dev_attr_cmg.attr, |
| &dev_attr_shared.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group chp_attr_group = { |
| .attrs = chp_attrs, |
| }; |
| |
| static void |
| chp_release(struct device *dev) |
| { |
| struct channel_path *cp; |
| |
| cp = container_of(dev, struct channel_path, dev); |
| kfree(cp); |
| } |
| |
| static int |
| chsc_determine_channel_path_description(int chpid, |
| struct channel_path_desc *desc) |
| { |
| int ccode, ret; |
| |
| struct { |
| struct chsc_header request; |
| u32 : 24; |
| u32 first_chpid : 8; |
| u32 : 24; |
| u32 last_chpid : 8; |
| u32 zeroes1; |
| struct chsc_header response; |
| u32 zeroes2; |
| struct channel_path_desc desc; |
| } *scpd_area; |
| |
| scpd_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!scpd_area) |
| return -ENOMEM; |
| |
| scpd_area->request.length = 0x0010; |
| scpd_area->request.code = 0x0002; |
| |
| scpd_area->first_chpid = chpid; |
| scpd_area->last_chpid = chpid; |
| |
| ccode = chsc(scpd_area); |
| if (ccode > 0) { |
| ret = (ccode == 3) ? -ENODEV : -EBUSY; |
| goto out; |
| } |
| |
| switch (scpd_area->response.code) { |
| case 0x0001: /* Success. */ |
| memcpy(desc, &scpd_area->desc, |
| sizeof(struct channel_path_desc)); |
| ret = 0; |
| break; |
| case 0x0003: /* Invalid block. */ |
| case 0x0007: /* Invalid format. */ |
| case 0x0008: /* Other invalid block. */ |
| CIO_CRW_EVENT(2, "Error in chsc request block!\n"); |
| ret = -EINVAL; |
| break; |
| case 0x0004: /* Command not provided in model. */ |
| CIO_CRW_EVENT(2, "Model does not provide scpd\n"); |
| ret = -EOPNOTSUPP; |
| break; |
| default: |
| CIO_CRW_EVENT(2, "Unknown CHSC response %d\n", |
| scpd_area->response.code); |
| ret = -EIO; |
| } |
| out: |
| free_page((unsigned long)scpd_area); |
| return ret; |
| } |
| |
| static void |
| chsc_initialize_cmg_chars(struct channel_path *chp, u8 cmcv, |
| struct cmg_chars *chars) |
| { |
| switch (chp->cmg) { |
| case 2: |
| case 3: |
| chp->cmg_chars = kmalloc(sizeof(struct cmg_chars), |
| GFP_KERNEL); |
| if (chp->cmg_chars) { |
| int i, mask; |
| struct cmg_chars *cmg_chars; |
| |
| cmg_chars = chp->cmg_chars; |
| for (i = 0; i < NR_MEASUREMENT_CHARS; i++) { |
| mask = 0x80 >> (i + 3); |
| if (cmcv & mask) |
| cmg_chars->values[i] = chars->values[i]; |
| else |
| cmg_chars->values[i] = 0; |
| } |
| } |
| break; |
| default: |
| /* No cmg-dependent data. */ |
| break; |
| } |
| } |
| |
| static int |
| chsc_get_channel_measurement_chars(struct channel_path *chp) |
| { |
| int ccode, ret; |
| |
| struct { |
| struct chsc_header request; |
| u32 : 24; |
| u32 first_chpid : 8; |
| u32 : 24; |
| u32 last_chpid : 8; |
| u32 zeroes1; |
| struct chsc_header response; |
| u32 zeroes2; |
| u32 not_valid : 1; |
| u32 shared : 1; |
| u32 : 22; |
| u32 chpid : 8; |
| u32 cmcv : 5; |
| u32 : 11; |
| u32 cmgq : 8; |
| u32 cmg : 8; |
| u32 zeroes3; |
| u32 data[NR_MEASUREMENT_CHARS]; |
| } *scmc_area; |
| |
| scmc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!scmc_area) |
| return -ENOMEM; |
| |
| scmc_area->request.length = 0x0010; |
| scmc_area->request.code = 0x0022; |
| |
| scmc_area->first_chpid = chp->id; |
| scmc_area->last_chpid = chp->id; |
| |
| ccode = chsc(scmc_area); |
| if (ccode > 0) { |
| ret = (ccode == 3) ? -ENODEV : -EBUSY; |
| goto out; |
| } |
| |
| switch (scmc_area->response.code) { |
| case 0x0001: /* Success. */ |
| if (!scmc_area->not_valid) { |
| chp->cmg = scmc_area->cmg; |
| chp->shared = scmc_area->shared; |
| chsc_initialize_cmg_chars(chp, scmc_area->cmcv, |
| (struct cmg_chars *) |
| &scmc_area->data); |
| } else { |
| chp->cmg = -1; |
| chp->shared = -1; |
| } |
| ret = 0; |
| break; |
| case 0x0003: /* Invalid block. */ |
| case 0x0007: /* Invalid format. */ |
| case 0x0008: /* Invalid bit combination. */ |
| CIO_CRW_EVENT(2, "Error in chsc request block!\n"); |
| ret = -EINVAL; |
| break; |
| case 0x0004: /* Command not provided. */ |
| CIO_CRW_EVENT(2, "Model does not provide scmc\n"); |
| ret = -EOPNOTSUPP; |
| break; |
| default: |
| CIO_CRW_EVENT(2, "Unknown CHSC response %d\n", |
| scmc_area->response.code); |
| ret = -EIO; |
| } |
| out: |
| free_page((unsigned long)scmc_area); |
| return ret; |
| } |
| |
| /* |
| * Entries for chpids on the system bus. |
| * This replaces /proc/chpids. |
| */ |
| static int |
| new_channel_path(int chpid) |
| { |
| struct channel_path *chp; |
| int ret; |
| |
| chp = kzalloc(sizeof(struct channel_path), GFP_KERNEL); |
| if (!chp) |
| return -ENOMEM; |
| |
| /* fill in status, etc. */ |
| chp->id = chpid; |
| chp->state = 1; |
| chp->dev = (struct device) { |
| .parent = &css[0]->device, |
| .release = chp_release, |
| }; |
| snprintf(chp->dev.bus_id, BUS_ID_SIZE, "chp0.%x", chpid); |
| |
| /* Obtain channel path description and fill it in. */ |
| ret = chsc_determine_channel_path_description(chpid, &chp->desc); |
| if (ret) |
| goto out_free; |
| /* Get channel-measurement characteristics. */ |
| if (css_characteristics_avail && css_chsc_characteristics.scmc |
| && css_chsc_characteristics.secm) { |
| ret = chsc_get_channel_measurement_chars(chp); |
| if (ret) |
| goto out_free; |
| } else { |
| static int msg_done; |
| |
| if (!msg_done) { |
| printk(KERN_WARNING "cio: Channel measurements not " |
| "available, continuing.\n"); |
| msg_done = 1; |
| } |
| chp->cmg = -1; |
| } |
| |
| /* make it known to the system */ |
| ret = device_register(&chp->dev); |
| if (ret) { |
| printk(KERN_WARNING "%s: could not register %02x\n", |
| __func__, chpid); |
| goto out_free; |
| } |
| ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group); |
| if (ret) { |
| device_unregister(&chp->dev); |
| goto out_free; |
| } |
| mutex_lock(&css[0]->mutex); |
| if (css[0]->cm_enabled) { |
| ret = chsc_add_chp_cmg_attr(chp); |
| if (ret) { |
| sysfs_remove_group(&chp->dev.kobj, &chp_attr_group); |
| device_unregister(&chp->dev); |
| mutex_unlock(&css[0]->mutex); |
| goto out_free; |
| } |
| } |
| css[0]->chps[chpid] = chp; |
| mutex_unlock(&css[0]->mutex); |
| return ret; |
| out_free: |
| kfree(chp); |
| return ret; |
| } |
| |
| void * |
| chsc_get_chp_desc(struct subchannel *sch, int chp_no) |
| { |
| struct channel_path *chp; |
| struct channel_path_desc *desc; |
| |
| chp = css[0]->chps[sch->schib.pmcw.chpid[chp_no]]; |
| if (!chp) |
| return NULL; |
| desc = kmalloc(sizeof(struct channel_path_desc), GFP_KERNEL); |
| if (!desc) |
| return NULL; |
| memcpy(desc, &chp->desc, sizeof(struct channel_path_desc)); |
| return desc; |
| } |
| |
| static int reset_channel_path(struct channel_path *chp) |
| { |
| int cc; |
| |
| cc = rchp(chp->id); |
| switch (cc) { |
| case 0: |
| return 0; |
| case 2: |
| return -EBUSY; |
| default: |
| return -ENODEV; |
| } |
| } |
| |
| static void reset_channel_paths_css(struct channel_subsystem *css) |
| { |
| int i; |
| |
| for (i = 0; i <= __MAX_CHPID; i++) { |
| if (css->chps[i]) |
| reset_channel_path(css->chps[i]); |
| } |
| } |
| |
| void cio_reset_channel_paths(void) |
| { |
| int i; |
| |
| for (i = 0; i <= __MAX_CSSID; i++) { |
| if (css[i] && css[i]->valid) |
| reset_channel_paths_css(css[i]); |
| } |
| } |
| |
| static int __init |
| chsc_alloc_sei_area(void) |
| { |
| sei_page = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!sei_page) |
| printk(KERN_WARNING"Can't allocate page for processing of " \ |
| "chsc machine checks!\n"); |
| return (sei_page ? 0 : -ENOMEM); |
| } |
| |
| int __init |
| chsc_enable_facility(int operation_code) |
| { |
| int ret; |
| struct { |
| struct chsc_header request; |
| u8 reserved1:4; |
| u8 format:4; |
| u8 reserved2; |
| u16 operation_code; |
| u32 reserved3; |
| u32 reserved4; |
| u32 operation_data_area[252]; |
| struct chsc_header response; |
| u32 reserved5:4; |
| u32 format2:4; |
| u32 reserved6:24; |
| } *sda_area; |
| |
| sda_area = (void *)get_zeroed_page(GFP_KERNEL|GFP_DMA); |
| if (!sda_area) |
| return -ENOMEM; |
| sda_area->request.length = 0x0400; |
| sda_area->request.code = 0x0031; |
| sda_area->operation_code = operation_code; |
| |
| ret = chsc(sda_area); |
| if (ret > 0) { |
| ret = (ret == 3) ? -ENODEV : -EBUSY; |
| goto out; |
| } |
| switch (sda_area->response.code) { |
| case 0x0001: /* everything ok */ |
| ret = 0; |
| break; |
| case 0x0003: /* invalid request block */ |
| case 0x0007: |
| ret = -EINVAL; |
| break; |
| case 0x0004: /* command not provided */ |
| case 0x0101: /* facility not provided */ |
| ret = -EOPNOTSUPP; |
| break; |
| default: /* something went wrong */ |
| ret = -EIO; |
| } |
| out: |
| free_page((unsigned long)sda_area); |
| return ret; |
| } |
| |
| subsys_initcall(chsc_alloc_sei_area); |
| |
| struct css_general_char css_general_characteristics; |
| struct css_chsc_char css_chsc_characteristics; |
| |
| int __init |
| chsc_determine_css_characteristics(void) |
| { |
| int result; |
| struct { |
| struct chsc_header request; |
| u32 reserved1; |
| u32 reserved2; |
| u32 reserved3; |
| struct chsc_header response; |
| u32 reserved4; |
| u32 general_char[510]; |
| u32 chsc_char[518]; |
| } *scsc_area; |
| |
| scsc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!scsc_area) { |
| printk(KERN_WARNING"cio: Was not able to determine available" \ |
| "CHSCs due to no memory.\n"); |
| return -ENOMEM; |
| } |
| |
| scsc_area->request.length = 0x0010; |
| scsc_area->request.code = 0x0010; |
| |
| result = chsc(scsc_area); |
| if (result) { |
| printk(KERN_WARNING"cio: Was not able to determine " \ |
| "available CHSCs, cc=%i.\n", result); |
| result = -EIO; |
| goto exit; |
| } |
| |
| if (scsc_area->response.code != 1) { |
| printk(KERN_WARNING"cio: Was not able to determine " \ |
| "available CHSCs.\n"); |
| result = -EIO; |
| goto exit; |
| } |
| memcpy(&css_general_characteristics, scsc_area->general_char, |
| sizeof(css_general_characteristics)); |
| memcpy(&css_chsc_characteristics, scsc_area->chsc_char, |
| sizeof(css_chsc_characteristics)); |
| exit: |
| free_page ((unsigned long) scsc_area); |
| return result; |
| } |
| |
| EXPORT_SYMBOL_GPL(css_general_characteristics); |
| EXPORT_SYMBOL_GPL(css_chsc_characteristics); |