| /* Device Tree Source for Motorola PrPMC2800 |
| * |
| * Author: Mark A. Greer <mgreer@mvista.com> |
| * |
| * 2007 (c) MontaVista, Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| * |
| * Property values that are labeled as "Default" will be updated by bootwrapper |
| * if it can determine the exact PrPMC type. |
| * |
| * To build: |
| * dtc -I dts -O asm -o prpmc2800.S -b 0 prpmc2800.dts |
| * dtc -I dts -O dtb -o prpmc2800.dtb -b 0 prpmc2800.dts |
| */ |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| model = "PrPMC280/PrPMC2800"; /* Default */ |
| compatible = "motorola,PrPMC2800"; |
| coherency-off; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,7447 { |
| device_type = "cpu"; |
| reg = <0>; |
| clock-frequency = <2bb0b140>; /* Default (733 MHz) */ |
| bus-frequency = <7f28155>; /* 133.333333 MHz */ |
| timebase-frequency = <1fca055>; /* 33.333333 MHz */ |
| i-cache-line-size = <20>; |
| d-cache-line-size = <20>; |
| i-cache-size = <8000>; |
| d-cache-size = <8000>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <00000000 20000000>; /* Default (512MB) */ |
| }; |
| |
| mv64x60@f1000000 { /* Marvell Discovery */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #interrupt-cells = <1>; |
| model = "mv64360"; /* Default */ |
| compatible = "marvell,mv64x60"; |
| clock-frequency = <7f28155>; /* 133.333333 MHz */ |
| reg = <f1000000 00010000>; |
| virtual-reg = <f1000000>; |
| ranges = <88000000 88000000 01000000 /* PCI 0 I/O Space */ |
| 80000000 80000000 08000000 /* PCI 0 MEM Space */ |
| a0000000 a0000000 04000000 /* User FLASH */ |
| 00000000 f1000000 00010000 /* Bridge's regs */ |
| f2000000 f2000000 00040000>; /* Integrated SRAM */ |
| |
| flash@a0000000 { |
| device_type = "rom"; |
| compatible = "direct-mapped"; |
| reg = <a0000000 4000000>; /* Default (64MB) */ |
| probe-type = "CFI"; |
| bank-width = <4>; |
| partitions = <00000000 00100000 /* RO */ |
| 00100000 00040001 /* RW */ |
| 00140000 00400000 /* RO */ |
| 00540000 039c0000 /* RO */ |
| 03f00000 00100000>; /* RO */ |
| partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B"; |
| }; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| device_type = "mdio"; |
| compatible = "marvell,mv64x60-mdio"; |
| ethernet-phy@1 { |
| device_type = "ethernet-phy"; |
| compatible = "broadcom,bcm5421"; |
| interrupts = <4c>; /* GPP 12 */ |
| interrupt-parent = <&/mv64x60/pic>; |
| reg = <1>; |
| }; |
| ethernet-phy@3 { |
| device_type = "ethernet-phy"; |
| compatible = "broadcom,bcm5421"; |
| interrupts = <4c>; /* GPP 12 */ |
| interrupt-parent = <&/mv64x60/pic>; |
| reg = <3>; |
| }; |
| }; |
| |
| ethernet@2000 { |
| reg = <2000 2000>; |
| eth0 { |
| device_type = "network"; |
| compatible = "marvell,mv64x60-eth"; |
| block-index = <0>; |
| interrupts = <20>; |
| interrupt-parent = <&/mv64x60/pic>; |
| phy = <&/mv64x60/mdio/ethernet-phy@1>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| }; |
| eth1 { |
| device_type = "network"; |
| compatible = "marvell,mv64x60-eth"; |
| block-index = <1>; |
| interrupts = <21>; |
| interrupt-parent = <&/mv64x60/pic>; |
| phy = <&/mv64x60/mdio/ethernet-phy@3>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| }; |
| }; |
| |
| sdma@4000 { |
| device_type = "dma"; |
| compatible = "marvell,mv64x60-sdma"; |
| reg = <4000 c18>; |
| virtual-reg = <f1004000>; |
| interrupt-base = <0>; |
| interrupts = <24>; |
| interrupt-parent = <&/mv64x60/pic>; |
| }; |
| |
| sdma@6000 { |
| device_type = "dma"; |
| compatible = "marvell,mv64x60-sdma"; |
| reg = <6000 c18>; |
| virtual-reg = <f1006000>; |
| interrupt-base = <0>; |
| interrupts = <26>; |
| interrupt-parent = <&/mv64x60/pic>; |
| }; |
| |
| brg@b200 { |
| compatible = "marvell,mv64x60-brg"; |
| reg = <b200 8>; |
| clock-src = <8>; |
| clock-frequency = <7ed6b40>; |
| current-speed = <2580>; |
| bcr = <0>; |
| }; |
| |
| brg@b208 { |
| compatible = "marvell,mv64x60-brg"; |
| reg = <b208 8>; |
| clock-src = <8>; |
| clock-frequency = <7ed6b40>; |
| current-speed = <2580>; |
| bcr = <0>; |
| }; |
| |
| cunit@f200 { |
| reg = <f200 200>; |
| }; |
| |
| mpscrouting@b400 { |
| reg = <b400 c>; |
| }; |
| |
| mpscintr@b800 { |
| reg = <b800 100>; |
| virtual-reg = <f100b800>; |
| }; |
| |
| mpsc@8000 { |
| device_type = "serial"; |
| compatible = "marvell,mpsc"; |
| reg = <8000 38>; |
| virtual-reg = <f1008000>; |
| sdma = <&/mv64x60/sdma@4000>; |
| brg = <&/mv64x60/brg@b200>; |
| cunit = <&/mv64x60/cunit@f200>; |
| mpscrouting = <&/mv64x60/mpscrouting@b400>; |
| mpscintr = <&/mv64x60/mpscintr@b800>; |
| block-index = <0>; |
| max_idle = <28>; |
| chr_1 = <0>; |
| chr_2 = <0>; |
| chr_10 = <3>; |
| mpcr = <0>; |
| interrupts = <28>; |
| interrupt-parent = <&/mv64x60/pic>; |
| }; |
| |
| mpsc@9000 { |
| device_type = "serial"; |
| compatible = "marvell,mpsc"; |
| reg = <9000 38>; |
| virtual-reg = <f1009000>; |
| sdma = <&/mv64x60/sdma@6000>; |
| brg = <&/mv64x60/brg@b208>; |
| cunit = <&/mv64x60/cunit@f200>; |
| mpscrouting = <&/mv64x60/mpscrouting@b400>; |
| mpscintr = <&/mv64x60/mpscintr@b800>; |
| block-index = <1>; |
| max_idle = <28>; |
| chr_1 = <0>; |
| chr_2 = <0>; |
| chr_10 = <3>; |
| mpcr = <0>; |
| interrupts = <2a>; |
| interrupt-parent = <&/mv64x60/pic>; |
| }; |
| |
| i2c@c000 { |
| device_type = "i2c"; |
| compatible = "marvell,mv64x60-i2c"; |
| reg = <c000 20>; |
| virtual-reg = <f100c000>; |
| freq_m = <8>; |
| freq_n = <3>; |
| timeout = <3e8>; /* 1000 = 1 second */ |
| retries = <1>; |
| interrupts = <25>; |
| interrupt-parent = <&/mv64x60/pic>; |
| }; |
| |
| pic { |
| #interrupt-cells = <1>; |
| #address-cells = <0>; |
| compatible = "marvell,mv64x60-pic"; |
| reg = <0000 88>; |
| interrupt-controller; |
| }; |
| |
| mpp@f000 { |
| compatible = "marvell,mv64x60-mpp"; |
| reg = <f000 10>; |
| }; |
| |
| gpp@f100 { |
| compatible = "marvell,mv64x60-gpp"; |
| reg = <f100 20>; |
| }; |
| |
| pci@80000000 { |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| device_type = "pci"; |
| compatible = "marvell,mv64x60-pci"; |
| reg = <0cf8 8>; |
| ranges = <01000000 0 0 88000000 0 01000000 |
| 02000000 0 80000000 80000000 0 08000000>; |
| bus-range = <0 ff>; |
| clock-frequency = <3EF1480>; |
| interrupt-pci-iack = <0c34>; |
| interrupt-parent = <&/mv64x60/pic>; |
| interrupt-map-mask = <f800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0a */ |
| 5000 0 0 1 &/mv64x60/pic 50 |
| 5000 0 0 2 &/mv64x60/pic 51 |
| 5000 0 0 3 &/mv64x60/pic 5b |
| 5000 0 0 4 &/mv64x60/pic 5d |
| |
| /* IDSEL 0x0b */ |
| 5800 0 0 1 &/mv64x60/pic 5b |
| 5800 0 0 2 &/mv64x60/pic 5d |
| 5800 0 0 3 &/mv64x60/pic 50 |
| 5800 0 0 4 &/mv64x60/pic 51 |
| |
| /* IDSEL 0x0c */ |
| 6000 0 0 1 &/mv64x60/pic 5b |
| 6000 0 0 2 &/mv64x60/pic 5d |
| 6000 0 0 3 &/mv64x60/pic 50 |
| 6000 0 0 4 &/mv64x60/pic 51 |
| |
| /* IDSEL 0x0d */ |
| 6800 0 0 1 &/mv64x60/pic 5d |
| 6800 0 0 2 &/mv64x60/pic 50 |
| 6800 0 0 3 &/mv64x60/pic 51 |
| 6800 0 0 4 &/mv64x60/pic 5b |
| >; |
| }; |
| |
| cpu-error@0070 { |
| compatible = "marvell,mv64x60-cpu-error"; |
| reg = <0070 10 0128 28>; |
| interrupts = <03>; |
| interrupt-parent = <&/mv64x60/pic>; |
| }; |
| |
| sram-ctrl@0380 { |
| compatible = "marvell,mv64x60-sram-ctrl"; |
| reg = <0380 80>; |
| interrupts = <0d>; |
| interrupt-parent = <&/mv64x60/pic>; |
| }; |
| |
| pci-error@1d40 { |
| compatible = "marvell,mv64x60-pci-error"; |
| reg = <1d40 40 0c28 4>; |
| interrupts = <0c>; |
| interrupt-parent = <&/mv64x60/pic>; |
| }; |
| |
| mem-ctrl@1400 { |
| compatible = "marvell,mv64x60-mem-ctrl"; |
| reg = <1400 60>; |
| interrupts = <11>; |
| interrupt-parent = <&/mv64x60/pic>; |
| }; |
| }; |
| |
| chosen { |
| bootargs = "ip=on console=ttyMM0"; |
| linux,stdout-path = "/mv64x60@f1000000/mpsc@8000"; |
| }; |
| }; |