| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2010 John Crispin <blogic@openwrt.org> |
| */ |
| |
| #ifndef _LTQ_XWAY_H__ |
| #define _LTQ_XWAY_H__ |
| |
| #ifdef CONFIG_SOC_TYPE_XWAY |
| |
| #include <lantiq.h> |
| |
| /* Chip IDs */ |
| #define SOC_ID_DANUBE1 0x129 |
| #define SOC_ID_DANUBE2 0x12B |
| #define SOC_ID_TWINPASS 0x12D |
| #define SOC_ID_AMAZON_SE_1 0x152 /* 50601 */ |
| #define SOC_ID_AMAZON_SE_2 0x153 /* 50600 */ |
| #define SOC_ID_ARX188 0x16C |
| #define SOC_ID_ARX168_1 0x16D |
| #define SOC_ID_ARX168_2 0x16E |
| #define SOC_ID_ARX182 0x16F |
| #define SOC_ID_GRX188 0x170 |
| #define SOC_ID_GRX168 0x171 |
| |
| #define SOC_ID_VRX288 0x1C0 /* v1.1 */ |
| #define SOC_ID_VRX282 0x1C1 /* v1.1 */ |
| #define SOC_ID_VRX268 0x1C2 /* v1.1 */ |
| #define SOC_ID_GRX268 0x1C8 /* v1.1 */ |
| #define SOC_ID_GRX288 0x1C9 /* v1.1 */ |
| #define SOC_ID_VRX288_2 0x00B /* v1.2 */ |
| #define SOC_ID_VRX268_2 0x00C /* v1.2 */ |
| #define SOC_ID_GRX288_2 0x00D /* v1.2 */ |
| #define SOC_ID_GRX282_2 0x00E /* v1.2 */ |
| |
| /* SoC Types */ |
| #define SOC_TYPE_DANUBE 0x01 |
| #define SOC_TYPE_TWINPASS 0x02 |
| #define SOC_TYPE_AR9 0x03 |
| #define SOC_TYPE_VR9 0x04 /* v1.1 */ |
| #define SOC_TYPE_VR9_2 0x05 /* v1.2 */ |
| #define SOC_TYPE_AMAZON_SE 0x06 |
| |
| /* BOOT_SEL - find what boot media we have */ |
| #define BS_EXT_ROM 0x0 |
| #define BS_FLASH 0x1 |
| #define BS_MII0 0x2 |
| #define BS_PCI 0x3 |
| #define BS_UART1 0x4 |
| #define BS_SPI 0x5 |
| #define BS_NAND 0x6 |
| #define BS_RMII0 0x7 |
| |
| /* helpers used to access the cgu */ |
| #define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y)) |
| #define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x)) |
| extern __iomem void *ltq_cgu_membase; |
| |
| /* |
| * during early_printk no ioremap is possible |
| * lets use KSEG1 instead |
| */ |
| #define LTQ_ASC1_BASE_ADDR 0x1E100C00 |
| #define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC1_BASE_ADDR) |
| |
| /* EBU - external bus unit */ |
| #define LTQ_EBU_BUSCON0 0x0060 |
| #define LTQ_EBU_PCC_CON 0x0090 |
| #define LTQ_EBU_PCC_IEN 0x00A4 |
| #define LTQ_EBU_PCC_ISTAT 0x00A0 |
| #define LTQ_EBU_BUSCON1 0x0064 |
| #define LTQ_EBU_ADDRSEL1 0x0024 |
| #define EBU_WRDIS 0x80000000 |
| |
| /* WDT */ |
| #define LTQ_RST_CAUSE_WDTRST 0x20 |
| |
| /* MPS - multi processor unit (voice) */ |
| #define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000) |
| #define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344)) |
| |
| /* allow booting xrx200 phys */ |
| int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr); |
| |
| /* request a non-gpio and set the PIO config */ |
| #define PMU_PPE BIT(13) |
| extern void ltq_pmu_enable(unsigned int module); |
| extern void ltq_pmu_disable(unsigned int module); |
| |
| #endif /* CONFIG_SOC_TYPE_XWAY */ |
| #endif /* _LTQ_XWAY_H__ */ |
