| /* |
| * File: arch/blackfin/kernel/bfin_gpio.c |
| * Based on: |
| * Author: Michael Hennerich (hennerich@blackfin.uclinux.org) |
| * |
| * Created: |
| * Description: GPIO Abstraction Layer |
| * |
| * Modified: |
| * Copyright 2008 Analog Devices Inc. |
| * |
| * Bugs: Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see the file COPYING, or write |
| * to the Free Software Foundation, Inc., |
| * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/proc_fs.h> |
| #include <asm/blackfin.h> |
| #include <asm/gpio.h> |
| #include <asm/portmux.h> |
| #include <linux/irq.h> |
| |
| #if ANOMALY_05000311 || ANOMALY_05000323 |
| enum { |
| AWA_data = SYSCR, |
| AWA_data_clear = SYSCR, |
| AWA_data_set = SYSCR, |
| AWA_toggle = SYSCR, |
| AWA_maska = BFIN_UART_SCR, |
| AWA_maska_clear = BFIN_UART_SCR, |
| AWA_maska_set = BFIN_UART_SCR, |
| AWA_maska_toggle = BFIN_UART_SCR, |
| AWA_maskb = BFIN_UART_GCTL, |
| AWA_maskb_clear = BFIN_UART_GCTL, |
| AWA_maskb_set = BFIN_UART_GCTL, |
| AWA_maskb_toggle = BFIN_UART_GCTL, |
| AWA_dir = SPORT1_STAT, |
| AWA_polar = SPORT1_STAT, |
| AWA_edge = SPORT1_STAT, |
| AWA_both = SPORT1_STAT, |
| #if ANOMALY_05000311 |
| AWA_inen = TIMER_ENABLE, |
| #elif ANOMALY_05000323 |
| AWA_inen = DMA1_1_CONFIG, |
| #endif |
| }; |
| /* Anomaly Workaround */ |
| #define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name) |
| #else |
| #define AWA_DUMMY_READ(...) do { } while (0) |
| #endif |
| |
| static struct gpio_port_t * const gpio_array[] = { |
| #if defined(BF533_FAMILY) || defined(BF538_FAMILY) |
| (struct gpio_port_t *) FIO_FLAG_D, |
| #elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) |
| (struct gpio_port_t *) PORTFIO, |
| (struct gpio_port_t *) PORTGIO, |
| (struct gpio_port_t *) PORTHIO, |
| #elif defined(BF561_FAMILY) |
| (struct gpio_port_t *) FIO0_FLAG_D, |
| (struct gpio_port_t *) FIO1_FLAG_D, |
| (struct gpio_port_t *) FIO2_FLAG_D, |
| #elif defined(CONFIG_BF54x) |
| (struct gpio_port_t *)PORTA_FER, |
| (struct gpio_port_t *)PORTB_FER, |
| (struct gpio_port_t *)PORTC_FER, |
| (struct gpio_port_t *)PORTD_FER, |
| (struct gpio_port_t *)PORTE_FER, |
| (struct gpio_port_t *)PORTF_FER, |
| (struct gpio_port_t *)PORTG_FER, |
| (struct gpio_port_t *)PORTH_FER, |
| (struct gpio_port_t *)PORTI_FER, |
| (struct gpio_port_t *)PORTJ_FER, |
| #else |
| # error no gpio arrays defined |
| #endif |
| }; |
| |
| #if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) |
| static unsigned short * const port_fer[] = { |
| (unsigned short *) PORTF_FER, |
| (unsigned short *) PORTG_FER, |
| (unsigned short *) PORTH_FER, |
| }; |
| |
| # if !defined(BF537_FAMILY) |
| static unsigned short * const port_mux[] = { |
| (unsigned short *) PORTF_MUX, |
| (unsigned short *) PORTG_MUX, |
| (unsigned short *) PORTH_MUX, |
| }; |
| |
| static const |
| u8 pmux_offset[][16] = { |
| # if defined(CONFIG_BF52x) |
| { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ |
| { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ |
| { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ |
| # elif defined(CONFIG_BF51x) |
| { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */ |
| { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */ |
| { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */ |
| # endif |
| }; |
| # endif |
| |
| #endif |
| |
| static unsigned short reserved_gpio_map[GPIO_BANK_NUM]; |
| static unsigned short reserved_peri_map[gpio_bank(MAX_RESOURCES)]; |
| static unsigned short reserved_gpio_irq_map[GPIO_BANK_NUM]; |
| |
| #define RESOURCE_LABEL_SIZE 16 |
| |
| static struct str_ident { |
| char name[RESOURCE_LABEL_SIZE]; |
| } str_ident[MAX_RESOURCES]; |
| |
| #if defined(CONFIG_PM) |
| static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; |
| #endif |
| |
| inline int check_gpio(unsigned gpio) |
| { |
| #if defined(CONFIG_BF54x) |
| if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 |
| || gpio == GPIO_PH14 || gpio == GPIO_PH15 |
| || gpio == GPIO_PJ14 || gpio == GPIO_PJ15) |
| return -EINVAL; |
| #endif |
| if (gpio >= MAX_BLACKFIN_GPIOS) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static void gpio_error(unsigned gpio) |
| { |
| printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio); |
| } |
| |
| static void set_label(unsigned short ident, const char *label) |
| { |
| if (label) { |
| strncpy(str_ident[ident].name, label, |
| RESOURCE_LABEL_SIZE); |
| str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0; |
| } |
| } |
| |
| static char *get_label(unsigned short ident) |
| { |
| return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN"); |
| } |
| |
| static int cmp_label(unsigned short ident, const char *label) |
| { |
| if (label == NULL) { |
| dump_stack(); |
| printk(KERN_ERR "Please provide none-null label\n"); |
| } |
| |
| if (label) |
| return strcmp(str_ident[ident].name, label); |
| else |
| return -EINVAL; |
| } |
| |
| static void port_setup(unsigned gpio, unsigned short usage) |
| { |
| if (check_gpio(gpio)) |
| return; |
| |
| #if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) |
| if (usage == GPIO_USAGE) |
| *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); |
| else |
| *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); |
| SSYNC(); |
| #elif defined(CONFIG_BF54x) |
| if (usage == GPIO_USAGE) |
| gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); |
| else |
| gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); |
| SSYNC(); |
| #endif |
| } |
| |
| #ifdef BF537_FAMILY |
| static struct { |
| unsigned short res; |
| unsigned short offset; |
| } port_mux_lut[] = { |
| {.res = P_PPI0_D13, .offset = 11}, |
| {.res = P_PPI0_D14, .offset = 11}, |
| {.res = P_PPI0_D15, .offset = 11}, |
| {.res = P_SPORT1_TFS, .offset = 11}, |
| {.res = P_SPORT1_TSCLK, .offset = 11}, |
| {.res = P_SPORT1_DTPRI, .offset = 11}, |
| {.res = P_PPI0_D10, .offset = 10}, |
| {.res = P_PPI0_D11, .offset = 10}, |
| {.res = P_PPI0_D12, .offset = 10}, |
| {.res = P_SPORT1_RSCLK, .offset = 10}, |
| {.res = P_SPORT1_RFS, .offset = 10}, |
| {.res = P_SPORT1_DRPRI, .offset = 10}, |
| {.res = P_PPI0_D8, .offset = 9}, |
| {.res = P_PPI0_D9, .offset = 9}, |
| {.res = P_SPORT1_DRSEC, .offset = 9}, |
| {.res = P_SPORT1_DTSEC, .offset = 9}, |
| {.res = P_TMR2, .offset = 8}, |
| {.res = P_PPI0_FS3, .offset = 8}, |
| {.res = P_TMR3, .offset = 7}, |
| {.res = P_SPI0_SSEL4, .offset = 7}, |
| {.res = P_TMR4, .offset = 6}, |
| {.res = P_SPI0_SSEL5, .offset = 6}, |
| {.res = P_TMR5, .offset = 5}, |
| {.res = P_SPI0_SSEL6, .offset = 5}, |
| {.res = P_UART1_RX, .offset = 4}, |
| {.res = P_UART1_TX, .offset = 4}, |
| {.res = P_TMR6, .offset = 4}, |
| {.res = P_TMR7, .offset = 4}, |
| {.res = P_UART0_RX, .offset = 3}, |
| {.res = P_UART0_TX, .offset = 3}, |
| {.res = P_DMAR0, .offset = 3}, |
| {.res = P_DMAR1, .offset = 3}, |
| {.res = P_SPORT0_DTSEC, .offset = 1}, |
| {.res = P_SPORT0_DRSEC, .offset = 1}, |
| {.res = P_CAN0_RX, .offset = 1}, |
| {.res = P_CAN0_TX, .offset = 1}, |
| {.res = P_SPI0_SSEL7, .offset = 1}, |
| {.res = P_SPORT0_TFS, .offset = 0}, |
| {.res = P_SPORT0_DTPRI, .offset = 0}, |
| {.res = P_SPI0_SSEL2, .offset = 0}, |
| {.res = P_SPI0_SSEL3, .offset = 0}, |
| }; |
| |
| static void portmux_setup(unsigned short per) |
| { |
| u16 y, offset, muxreg; |
| u16 function = P_FUNCT2MUX(per); |
| |
| for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { |
| if (port_mux_lut[y].res == per) { |
| |
| /* SET PORTMUX REG */ |
| |
| offset = port_mux_lut[y].offset; |
| muxreg = bfin_read_PORT_MUX(); |
| |
| if (offset != 1) |
| muxreg &= ~(1 << offset); |
| else |
| muxreg &= ~(3 << 1); |
| |
| muxreg |= (function << offset); |
| bfin_write_PORT_MUX(muxreg); |
| } |
| } |
| } |
| #elif defined(CONFIG_BF54x) |
| inline void portmux_setup(unsigned short per) |
| { |
| u32 pmux; |
| u16 ident = P_IDENT(per); |
| u16 function = P_FUNCT2MUX(per); |
| |
| pmux = gpio_array[gpio_bank(ident)]->port_mux; |
| |
| pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); |
| pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); |
| |
| gpio_array[gpio_bank(ident)]->port_mux = pmux; |
| } |
| |
| inline u16 get_portmux(unsigned short per) |
| { |
| u32 pmux; |
| u16 ident = P_IDENT(per); |
| |
| pmux = gpio_array[gpio_bank(ident)]->port_mux; |
| |
| return (pmux >> (2 * gpio_sub_n(ident)) & 0x3); |
| } |
| #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) |
| inline void portmux_setup(unsigned short per) |
| { |
| u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per); |
| u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)]; |
| |
| pmux = *port_mux[gpio_bank(ident)]; |
| pmux &= ~(3 << offset); |
| pmux |= (function & 3) << offset; |
| *port_mux[gpio_bank(ident)] = pmux; |
| SSYNC(); |
| } |
| #else |
| # define portmux_setup(...) do { } while (0) |
| #endif |
| |
| #ifndef CONFIG_BF54x |
| /*********************************************************** |
| * |
| * FUNCTIONS: Blackfin General Purpose Ports Access Functions |
| * |
| * INPUTS/OUTPUTS: |
| * gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS |
| * |
| * |
| * DESCRIPTION: These functions abstract direct register access |
| * to Blackfin processor General Purpose |
| * Ports Regsiters |
| * |
| * CAUTION: These functions do not belong to the GPIO Driver API |
| ************************************************************* |
| * MODIFICATION HISTORY : |
| **************************************************************/ |
| |
| /* Set a specific bit */ |
| |
| #define SET_GPIO(name) \ |
| void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ |
| { \ |
| unsigned long flags; \ |
| local_irq_save_hw(flags); \ |
| if (arg) \ |
| gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ |
| else \ |
| gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ |
| AWA_DUMMY_READ(name); \ |
| local_irq_restore_hw(flags); \ |
| } \ |
| EXPORT_SYMBOL(set_gpio_ ## name); |
| |
| SET_GPIO(dir) /* set_gpio_dir() */ |
| SET_GPIO(inen) /* set_gpio_inen() */ |
| SET_GPIO(polar) /* set_gpio_polar() */ |
| SET_GPIO(edge) /* set_gpio_edge() */ |
| SET_GPIO(both) /* set_gpio_both() */ |
| |
| |
| #define SET_GPIO_SC(name) \ |
| void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ |
| { \ |
| unsigned long flags; \ |
| if (ANOMALY_05000311 || ANOMALY_05000323) \ |
| local_irq_save_hw(flags); \ |
| if (arg) \ |
| gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ |
| else \ |
| gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ |
| if (ANOMALY_05000311 || ANOMALY_05000323) { \ |
| AWA_DUMMY_READ(name); \ |
| local_irq_restore_hw(flags); \ |
| } \ |
| } \ |
| EXPORT_SYMBOL(set_gpio_ ## name); |
| |
| SET_GPIO_SC(maska) |
| SET_GPIO_SC(maskb) |
| SET_GPIO_SC(data) |
| |
| void set_gpio_toggle(unsigned gpio) |
| { |
| unsigned long flags; |
| if (ANOMALY_05000311 || ANOMALY_05000323) |
| local_irq_save_hw(flags); |
| gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); |
| if (ANOMALY_05000311 || ANOMALY_05000323) { |
| AWA_DUMMY_READ(toggle); |
| local_irq_restore_hw(flags); |
| } |
| } |
| EXPORT_SYMBOL(set_gpio_toggle); |
| |
| |
| /*Set current PORT date (16-bit word)*/ |
| |
| #define SET_GPIO_P(name) \ |
| void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ |
| { \ |
| unsigned long flags; \ |
| if (ANOMALY_05000311 || ANOMALY_05000323) \ |
| local_irq_save_hw(flags); \ |
| gpio_array[gpio_bank(gpio)]->name = arg; \ |
| if (ANOMALY_05000311 || ANOMALY_05000323) { \ |
| AWA_DUMMY_READ(name); \ |
| local_irq_restore_hw(flags); \ |
| } \ |
| } \ |
| EXPORT_SYMBOL(set_gpiop_ ## name); |
| |
| SET_GPIO_P(data) |
| SET_GPIO_P(dir) |
| SET_GPIO_P(inen) |
| SET_GPIO_P(polar) |
| SET_GPIO_P(edge) |
| SET_GPIO_P(both) |
| SET_GPIO_P(maska) |
| SET_GPIO_P(maskb) |
| |
| /* Get a specific bit */ |
| #define GET_GPIO(name) \ |
| unsigned short get_gpio_ ## name(unsigned gpio) \ |
| { \ |
| unsigned long flags; \ |
| unsigned short ret; \ |
| if (ANOMALY_05000311 || ANOMALY_05000323) \ |
| local_irq_save_hw(flags); \ |
| ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ |
| if (ANOMALY_05000311 || ANOMALY_05000323) { \ |
| AWA_DUMMY_READ(name); \ |
| local_irq_restore_hw(flags); \ |
| } \ |
| return ret; \ |
| } \ |
| EXPORT_SYMBOL(get_gpio_ ## name); |
| |
| GET_GPIO(data) |
| GET_GPIO(dir) |
| GET_GPIO(inen) |
| GET_GPIO(polar) |
| GET_GPIO(edge) |
| GET_GPIO(both) |
| GET_GPIO(maska) |
| GET_GPIO(maskb) |
| |
| /*Get current PORT date (16-bit word)*/ |
| |
| #define GET_GPIO_P(name) \ |
| unsigned short get_gpiop_ ## name(unsigned gpio) \ |
| { \ |
| unsigned long flags; \ |
| unsigned short ret; \ |
| if (ANOMALY_05000311 || ANOMALY_05000323) \ |
| local_irq_save_hw(flags); \ |
| ret = (gpio_array[gpio_bank(gpio)]->name); \ |
| if (ANOMALY_05000311 || ANOMALY_05000323) { \ |
| AWA_DUMMY_READ(name); \ |
| local_irq_restore_hw(flags); \ |
| } \ |
| return ret; \ |
| } \ |
| EXPORT_SYMBOL(get_gpiop_ ## name); |
| |
| GET_GPIO_P(data) |
| GET_GPIO_P(dir) |
| GET_GPIO_P(inen) |
| GET_GPIO_P(polar) |
| GET_GPIO_P(edge) |
| GET_GPIO_P(both) |
| GET_GPIO_P(maska) |
| GET_GPIO_P(maskb) |
| |
| |
| #ifdef CONFIG_PM |
| |
| static unsigned short wakeup_map[GPIO_BANK_NUM]; |
| static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; |
| |
| static const unsigned int sic_iwr_irqs[] = { |
| #if defined(BF533_FAMILY) |
| IRQ_PROG_INTB |
| #elif defined(BF537_FAMILY) |
| IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX |
| #elif defined(BF538_FAMILY) |
| IRQ_PORTF_INTB |
| #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) |
| IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB |
| #elif defined(BF561_FAMILY) |
| IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB |
| #else |
| # error no SIC_IWR defined |
| #endif |
| }; |
| |
| /*********************************************************** |
| * |
| * FUNCTIONS: Blackfin PM Setup API |
| * |
| * INPUTS/OUTPUTS: |
| * gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS |
| * type - |
| * PM_WAKE_RISING |
| * PM_WAKE_FALLING |
| * PM_WAKE_HIGH |
| * PM_WAKE_LOW |
| * PM_WAKE_BOTH_EDGES |
| * |
| * DESCRIPTION: Blackfin PM Driver API |
| * |
| * CAUTION: |
| ************************************************************* |
| * MODIFICATION HISTORY : |
| **************************************************************/ |
| int gpio_pm_wakeup_request(unsigned gpio, unsigned char type) |
| { |
| unsigned long flags; |
| |
| if ((check_gpio(gpio) < 0) || !type) |
| return -EINVAL; |
| |
| local_irq_save_hw(flags); |
| wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio); |
| wakeup_flags_map[gpio] = type; |
| local_irq_restore_hw(flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(gpio_pm_wakeup_request); |
| |
| void gpio_pm_wakeup_free(unsigned gpio) |
| { |
| unsigned long flags; |
| |
| if (check_gpio(gpio) < 0) |
| return; |
| |
| local_irq_save_hw(flags); |
| |
| wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); |
| |
| local_irq_restore_hw(flags); |
| } |
| EXPORT_SYMBOL(gpio_pm_wakeup_free); |
| |
| static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type) |
| { |
| port_setup(gpio, GPIO_USAGE); |
| set_gpio_dir(gpio, 0); |
| set_gpio_inen(gpio, 1); |
| |
| if (type & (PM_WAKE_RISING | PM_WAKE_FALLING)) |
| set_gpio_edge(gpio, 1); |
| else |
| set_gpio_edge(gpio, 0); |
| |
| if ((type & (PM_WAKE_BOTH_EDGES)) == (PM_WAKE_BOTH_EDGES)) |
| set_gpio_both(gpio, 1); |
| else |
| set_gpio_both(gpio, 0); |
| |
| if ((type & (PM_WAKE_FALLING | PM_WAKE_LOW))) |
| set_gpio_polar(gpio, 1); |
| else |
| set_gpio_polar(gpio, 0); |
| |
| SSYNC(); |
| |
| return 0; |
| } |
| |
| u32 bfin_pm_standby_setup(void) |
| { |
| u16 bank, mask, i, gpio; |
| |
| for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { |
| mask = wakeup_map[gpio_bank(i)]; |
| bank = gpio_bank(i); |
| |
| gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb; |
| gpio_array[bank]->maskb = 0; |
| |
| if (mask) { |
| #if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) |
| gpio_bank_saved[bank].fer = *port_fer[bank]; |
| #endif |
| gpio_bank_saved[bank].inen = gpio_array[bank]->inen; |
| gpio_bank_saved[bank].polar = gpio_array[bank]->polar; |
| gpio_bank_saved[bank].dir = gpio_array[bank]->dir; |
| gpio_bank_saved[bank].edge = gpio_array[bank]->edge; |
| gpio_bank_saved[bank].both = gpio_array[bank]->both; |
| gpio_bank_saved[bank].reserved = |
| reserved_gpio_map[bank]; |
| |
| gpio = i; |
| |
| while (mask) { |
| if ((mask & 1) && (wakeup_flags_map[gpio] != |
| PM_WAKE_IGNORE)) { |
| reserved_gpio_map[gpio_bank(gpio)] |= |
| gpio_bit(gpio); |
| bfin_gpio_wakeup_type(gpio, |
| wakeup_flags_map[gpio]); |
| set_gpio_data(gpio, 0); /*Clear*/ |
| } |
| gpio++; |
| mask >>= 1; |
| } |
| |
| bfin_internal_set_wake(sic_iwr_irqs[bank], 1); |
| gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)]; |
| } |
| } |
| |
| AWA_DUMMY_READ(maskb_set); |
| |
| return 0; |
| } |
| |
| void bfin_pm_standby_restore(void) |
| { |
| u16 bank, mask, i; |
| |
| for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { |
| mask = wakeup_map[gpio_bank(i)]; |
| bank = gpio_bank(i); |
| |
| if (mask) { |
| #if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) |
| *port_fer[bank] = gpio_bank_saved[bank].fer; |
| #endif |
| gpio_array[bank]->inen = gpio_bank_saved[bank].inen; |
| gpio_array[bank]->dir = gpio_bank_saved[bank].dir; |
| gpio_array[bank]->polar = gpio_bank_saved[bank].polar; |
| gpio_array[bank]->edge = gpio_bank_saved[bank].edge; |
| gpio_array[bank]->both = gpio_bank_saved[bank].both; |
| |
| reserved_gpio_map[bank] = |
| gpio_bank_saved[bank].reserved; |
| bfin_internal_set_wake(sic_iwr_irqs[bank], 0); |
| } |
| |
| gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb; |
| } |
| AWA_DUMMY_READ(maskb); |
| } |
| |
| void bfin_gpio_pm_hibernate_suspend(void) |
| { |
| int i, bank; |
| |
| for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { |
| bank = gpio_bank(i); |
| |
| #if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) |
| gpio_bank_saved[bank].fer = *port_fer[bank]; |
| #if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) |
| gpio_bank_saved[bank].mux = *port_mux[bank]; |
| #else |
| if (bank == 0) |
| gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); |
| #endif |
| #endif |
| gpio_bank_saved[bank].data = gpio_array[bank]->data; |
| gpio_bank_saved[bank].inen = gpio_array[bank]->inen; |
| gpio_bank_saved[bank].polar = gpio_array[bank]->polar; |
| gpio_bank_saved[bank].dir = gpio_array[bank]->dir; |
| gpio_bank_saved[bank].edge = gpio_array[bank]->edge; |
| gpio_bank_saved[bank].both = gpio_array[bank]->both; |
| gpio_bank_saved[bank].maska = gpio_array[bank]->maska; |
| } |
| |
| AWA_DUMMY_READ(maska); |
| } |
| |
| void bfin_gpio_pm_hibernate_restore(void) |
| { |
| int i, bank; |
| |
| for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { |
| bank = gpio_bank(i); |
| |
| #if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) |
| #if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) |
| *port_mux[bank] = gpio_bank_saved[bank].mux; |
| #else |
| if (bank == 0) |
| bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); |
| #endif |
| *port_fer[bank] = gpio_bank_saved[bank].fer; |
| #endif |
| gpio_array[bank]->inen = gpio_bank_saved[bank].inen; |
| gpio_array[bank]->data_set = gpio_bank_saved[bank].data |
| & gpio_bank_saved[bank].dir; |
| gpio_array[bank]->dir = gpio_bank_saved[bank].dir; |
| gpio_array[bank]->polar = gpio_bank_saved[bank].polar; |
| gpio_array[bank]->edge = gpio_bank_saved[bank].edge; |
| gpio_array[bank]->both = gpio_bank_saved[bank].both; |
| gpio_array[bank]->maska = gpio_bank_saved[bank].maska; |
| } |
| AWA_DUMMY_READ(maska); |
| } |
| |
| |
| #endif |
| #else /* CONFIG_BF54x */ |
| #ifdef CONFIG_PM |
| |
| u32 bfin_pm_standby_setup(void) |
| { |
| return 0; |
| } |
| |
| void bfin_pm_standby_restore(void) |
| { |
| |
| } |
| |
| void bfin_gpio_pm_hibernate_suspend(void) |
| { |
| int i, bank; |
| |
| for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { |
| bank = gpio_bank(i); |
| |
| gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; |
| gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; |
| gpio_bank_saved[bank].data = gpio_array[bank]->data; |
| gpio_bank_saved[bank].inen = gpio_array[bank]->inen; |
| gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set; |
| } |
| } |
| |
| void bfin_gpio_pm_hibernate_restore(void) |
| { |
| int i, bank; |
| |
| for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { |
| bank = gpio_bank(i); |
| |
| gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; |
| gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; |
| gpio_array[bank]->inen = gpio_bank_saved[bank].inen; |
| gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir; |
| gpio_array[bank]->data_set = gpio_bank_saved[bank].data |
| | gpio_bank_saved[bank].dir; |
| } |
| } |
| #endif |
| |
| unsigned short get_gpio_dir(unsigned gpio) |
| { |
| return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio))); |
| } |
| EXPORT_SYMBOL(get_gpio_dir); |
| |
| #endif /* CONFIG_BF54x */ |
| |
| /*********************************************************** |
| * |
| * FUNCTIONS: Blackfin Peripheral Resource Allocation |
| * and PortMux Setup |
| * |
| * INPUTS/OUTPUTS: |
| * per Peripheral Identifier |
| * label String |
| * |
| * DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API |
| * |
| * CAUTION: |
| ************************************************************* |
| * MODIFICATION HISTORY : |
| **************************************************************/ |
| |
| int peripheral_request(unsigned short per, const char *label) |
| { |
| unsigned long flags; |
| unsigned short ident = P_IDENT(per); |
| |
| /* |
| * Don't cares are pins with only one dedicated function |
| */ |
| |
| if (per & P_DONTCARE) |
| return 0; |
| |
| if (!(per & P_DEFINED)) |
| return -ENODEV; |
| |
| local_irq_save_hw(flags); |
| |
| /* If a pin can be muxed as either GPIO or peripheral, make |
| * sure it is not already a GPIO pin when we request it. |
| */ |
| if (unlikely(!check_gpio(ident) && |
| reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { |
| if (system_state == SYSTEM_BOOTING) |
| dump_stack(); |
| printk(KERN_ERR |
| "%s: Peripheral %d is already reserved as GPIO by %s !\n", |
| __func__, ident, get_label(ident)); |
| local_irq_restore_hw(flags); |
| return -EBUSY; |
| } |
| |
| if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { |
| |
| /* |
| * Pin functions like AMC address strobes my |
| * be requested and used by several drivers |
| */ |
| |
| #ifdef CONFIG_BF54x |
| if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { |
| #else |
| if (!(per & P_MAYSHARE)) { |
| #endif |
| /* |
| * Allow that the identical pin function can |
| * be requested from the same driver twice |
| */ |
| |
| if (cmp_label(ident, label) == 0) |
| goto anyway; |
| |
| if (system_state == SYSTEM_BOOTING) |
| dump_stack(); |
| printk(KERN_ERR |
| "%s: Peripheral %d function %d is already reserved by %s !\n", |
| __func__, ident, P_FUNCT2MUX(per), get_label(ident)); |
| local_irq_restore_hw(flags); |
| return -EBUSY; |
| } |
| } |
| |
| anyway: |
| reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); |
| |
| portmux_setup(per); |
| port_setup(ident, PERIPHERAL_USAGE); |
| |
| local_irq_restore_hw(flags); |
| set_label(ident, label); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(peripheral_request); |
| |
| int peripheral_request_list(const unsigned short per[], const char *label) |
| { |
| u16 cnt; |
| int ret; |
| |
| for (cnt = 0; per[cnt] != 0; cnt++) { |
| |
| ret = peripheral_request(per[cnt], label); |
| |
| if (ret < 0) { |
| for ( ; cnt > 0; cnt--) |
| peripheral_free(per[cnt - 1]); |
| |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(peripheral_request_list); |
| |
| void peripheral_free(unsigned short per) |
| { |
| unsigned long flags; |
| unsigned short ident = P_IDENT(per); |
| |
| if (per & P_DONTCARE) |
| return; |
| |
| if (!(per & P_DEFINED)) |
| return; |
| |
| local_irq_save_hw(flags); |
| |
| if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { |
| local_irq_restore_hw(flags); |
| return; |
| } |
| |
| if (!(per & P_MAYSHARE)) |
| port_setup(ident, GPIO_USAGE); |
| |
| reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident); |
| |
| set_label(ident, "free"); |
| |
| local_irq_restore_hw(flags); |
| } |
| EXPORT_SYMBOL(peripheral_free); |
| |
| void peripheral_free_list(const unsigned short per[]) |
| { |
| u16 cnt; |
| for (cnt = 0; per[cnt] != 0; cnt++) |
| peripheral_free(per[cnt]); |
| } |
| EXPORT_SYMBOL(peripheral_free_list); |
| |
| /*********************************************************** |
| * |
| * FUNCTIONS: Blackfin GPIO Driver |
| * |
| * INPUTS/OUTPUTS: |
| * gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS |
| * label String |
| * |
| * DESCRIPTION: Blackfin GPIO Driver API |
| * |
| * CAUTION: |
| ************************************************************* |
| * MODIFICATION HISTORY : |
| **************************************************************/ |
| |
| int bfin_gpio_request(unsigned gpio, const char *label) |
| { |
| unsigned long flags; |
| |
| if (check_gpio(gpio) < 0) |
| return -EINVAL; |
| |
| local_irq_save_hw(flags); |
| |
| /* |
| * Allow that the identical GPIO can |
| * be requested from the same driver twice |
| * Do nothing and return - |
| */ |
| |
| if (cmp_label(gpio, label) == 0) { |
| local_irq_restore_hw(flags); |
| return 0; |
| } |
| |
| if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { |
| if (system_state == SYSTEM_BOOTING) |
| dump_stack(); |
| printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", |
| gpio, get_label(gpio)); |
| local_irq_restore_hw(flags); |
| return -EBUSY; |
| } |
| if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { |
| if (system_state == SYSTEM_BOOTING) |
| dump_stack(); |
| printk(KERN_ERR |
| "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", |
| gpio, get_label(gpio)); |
| local_irq_restore_hw(flags); |
| return -EBUSY; |
| } |
| if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) { |
| printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" |
| " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); |
| } |
| #ifndef CONFIG_BF54x |
| else { /* Reset POLAR setting when acquiring a gpio for the first time */ |
| set_gpio_polar(gpio, 0); |
| } |
| #endif |
| |
| reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); |
| set_label(gpio, label); |
| |
| local_irq_restore_hw(flags); |
| |
| port_setup(gpio, GPIO_USAGE); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(bfin_gpio_request); |
| |
| void bfin_gpio_free(unsigned gpio) |
| { |
| unsigned long flags; |
| |
| if (check_gpio(gpio) < 0) |
| return; |
| |
| might_sleep(); |
| |
| local_irq_save_hw(flags); |
| |
| if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { |
| if (system_state == SYSTEM_BOOTING) |
| dump_stack(); |
| gpio_error(gpio); |
| local_irq_restore_hw(flags); |
| return; |
| } |
| |
| reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); |
| |
| set_label(gpio, "free"); |
| |
| local_irq_restore_hw(flags); |
| } |
| EXPORT_SYMBOL(bfin_gpio_free); |
| |
| int bfin_gpio_irq_request(unsigned gpio, const char *label) |
| { |
| unsigned long flags; |
| |
| if (check_gpio(gpio) < 0) |
| return -EINVAL; |
| |
| local_irq_save_hw(flags); |
| |
| if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { |
| if (system_state == SYSTEM_BOOTING) |
| dump_stack(); |
| printk(KERN_ERR |
| "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", |
| gpio, get_label(gpio)); |
| local_irq_restore_hw(flags); |
| return -EBUSY; |
| } |
| if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) |
| printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved by %s! " |
| "(Documentation/blackfin/bfin-gpio-notes.txt)\n", |
| gpio, get_label(gpio)); |
| |
| reserved_gpio_irq_map[gpio_bank(gpio)] |= gpio_bit(gpio); |
| set_label(gpio, label); |
| |
| local_irq_restore_hw(flags); |
| |
| port_setup(gpio, GPIO_USAGE); |
| |
| return 0; |
| } |
| |
| void bfin_gpio_irq_free(unsigned gpio) |
| { |
| unsigned long flags; |
| |
| if (check_gpio(gpio) < 0) |
| return; |
| |
| local_irq_save_hw(flags); |
| |
| if (unlikely(!(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { |
| if (system_state == SYSTEM_BOOTING) |
| dump_stack(); |
| gpio_error(gpio); |
| local_irq_restore_hw(flags); |
| return; |
| } |
| |
| reserved_gpio_irq_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); |
| |
| set_label(gpio, "free"); |
| |
| local_irq_restore_hw(flags); |
| } |
| |
| static inline void __bfin_gpio_direction_input(unsigned gpio) |
| { |
| #ifdef CONFIG_BF54x |
| gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); |
| #else |
| gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); |
| #endif |
| gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); |
| } |
| |
| int bfin_gpio_direction_input(unsigned gpio) |
| { |
| unsigned long flags; |
| |
| if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { |
| gpio_error(gpio); |
| return -EINVAL; |
| } |
| |
| local_irq_save_hw(flags); |
| __bfin_gpio_direction_input(gpio); |
| AWA_DUMMY_READ(inen); |
| local_irq_restore_hw(flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(bfin_gpio_direction_input); |
| |
| void bfin_gpio_irq_prepare(unsigned gpio) |
| { |
| #ifdef CONFIG_BF54x |
| unsigned long flags; |
| #endif |
| |
| port_setup(gpio, GPIO_USAGE); |
| |
| #ifdef CONFIG_BF54x |
| local_irq_save_hw(flags); |
| __bfin_gpio_direction_input(gpio); |
| local_irq_restore_hw(flags); |
| #endif |
| } |
| |
| void bfin_gpio_set_value(unsigned gpio, int arg) |
| { |
| if (arg) |
| gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); |
| else |
| gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); |
| } |
| EXPORT_SYMBOL(bfin_gpio_set_value); |
| |
| int bfin_gpio_direction_output(unsigned gpio, int value) |
| { |
| unsigned long flags; |
| |
| if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { |
| gpio_error(gpio); |
| return -EINVAL; |
| } |
| |
| local_irq_save_hw(flags); |
| |
| gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); |
| gpio_set_value(gpio, value); |
| #ifdef CONFIG_BF54x |
| gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); |
| #else |
| gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); |
| #endif |
| |
| AWA_DUMMY_READ(dir); |
| local_irq_restore_hw(flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(bfin_gpio_direction_output); |
| |
| int bfin_gpio_get_value(unsigned gpio) |
| { |
| #ifdef CONFIG_BF54x |
| return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); |
| #else |
| unsigned long flags; |
| |
| if (unlikely(get_gpio_edge(gpio))) { |
| int ret; |
| local_irq_save_hw(flags); |
| set_gpio_edge(gpio, 0); |
| ret = get_gpio_data(gpio); |
| set_gpio_edge(gpio, 1); |
| local_irq_restore_hw(flags); |
| return ret; |
| } else |
| return get_gpio_data(gpio); |
| #endif |
| } |
| EXPORT_SYMBOL(bfin_gpio_get_value); |
| |
| /* If we are booting from SPI and our board lacks a strong enough pull up, |
| * the core can reset and execute the bootrom faster than the resistor can |
| * pull the signal logically high. To work around this (common) error in |
| * board design, we explicitly set the pin back to GPIO mode, force /CS |
| * high, and wait for the electrons to do their thing. |
| * |
| * This function only makes sense to be called from reset code, but it |
| * lives here as we need to force all the GPIO states w/out going through |
| * BUG() checks and such. |
| */ |
| void bfin_reset_boot_spi_cs(unsigned short pin) |
| { |
| unsigned short gpio = P_IDENT(pin); |
| port_setup(gpio, GPIO_USAGE); |
| gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); |
| AWA_DUMMY_READ(data_set); |
| udelay(1); |
| } |
| |
| #if defined(CONFIG_PROC_FS) |
| static int gpio_proc_read(char *buf, char **start, off_t offset, |
| int len, int *unused_i, void *unused_v) |
| { |
| int c, irq, gpio, outlen = 0; |
| |
| for (c = 0; c < MAX_RESOURCES; c++) { |
| irq = reserved_gpio_irq_map[gpio_bank(c)] & gpio_bit(c); |
| gpio = reserved_gpio_map[gpio_bank(c)] & gpio_bit(c); |
| if (!check_gpio(c) && (gpio || irq)) |
| len = sprintf(buf, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c, |
| get_label(c), (gpio && irq) ? " *" : "", |
| get_gpio_dir(c) ? "OUTPUT" : "INPUT"); |
| else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c)) |
| len = sprintf(buf, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c)); |
| else |
| continue; |
| buf += len; |
| outlen += len; |
| } |
| return outlen; |
| } |
| |
| static __init int gpio_register_proc(void) |
| { |
| struct proc_dir_entry *proc_gpio; |
| |
| proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL); |
| if (proc_gpio) |
| proc_gpio->read_proc = gpio_proc_read; |
| return proc_gpio != NULL; |
| } |
| __initcall(gpio_register_proc); |
| #endif |
| |
| #ifdef CONFIG_GPIOLIB |
| int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio) |
| { |
| return bfin_gpio_direction_input(gpio); |
| } |
| |
| int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level) |
| { |
| return bfin_gpio_direction_output(gpio, level); |
| } |
| |
| int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio) |
| { |
| return bfin_gpio_get_value(gpio); |
| } |
| |
| void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value) |
| { |
| return bfin_gpio_set_value(gpio, value); |
| } |
| |
| int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio) |
| { |
| return bfin_gpio_request(gpio, chip->label); |
| } |
| |
| void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio) |
| { |
| return bfin_gpio_free(gpio); |
| } |
| |
| static struct gpio_chip bfin_chip = { |
| .label = "Blackfin-GPIOlib", |
| .direction_input = bfin_gpiolib_direction_input, |
| .get = bfin_gpiolib_get_value, |
| .direction_output = bfin_gpiolib_direction_output, |
| .set = bfin_gpiolib_set_value, |
| .request = bfin_gpiolib_gpio_request, |
| .free = bfin_gpiolib_gpio_free, |
| .base = 0, |
| .ngpio = MAX_BLACKFIN_GPIOS, |
| }; |
| |
| static int __init bfin_gpiolib_setup(void) |
| { |
| return gpiochip_add(&bfin_chip); |
| } |
| arch_initcall(bfin_gpiolib_setup); |
| #endif |