| /* |
| * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. |
| * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix |
| * |
| * Author: Fabio Estevam <fabio.estevam@freescale.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* |
| * This machine is known as: |
| * - i.MX35 3-Stack Development System |
| * - i.MX35 Platform Development Kit (i.MX35 PDK) |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/memory.h> |
| #include <linux/gpio.h> |
| #include <linux/usb/otg.h> |
| |
| #include <linux/mtd/physmap.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/time.h> |
| #include <asm/mach/map.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/common.h> |
| #include <mach/iomux-mx35.h> |
| #include <mach/irqs.h> |
| #include <mach/3ds_debugboard.h> |
| |
| #include "devices-imx35.h" |
| #include "devices.h" |
| |
| #define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1) |
| |
| static const struct imxuart_platform_data uart_pdata __initconst = { |
| .flags = IMXUART_HAVE_RTSCTS, |
| }; |
| |
| static struct physmap_flash_data mx35pdk_flash_data = { |
| .width = 2, |
| }; |
| |
| static struct resource mx35pdk_flash_resource = { |
| .start = MX35_CS0_BASE_ADDR, |
| .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device mx35pdk_flash = { |
| .name = "physmap-flash", |
| .id = 0, |
| .dev = { |
| .platform_data = &mx35pdk_flash_data, |
| }, |
| .resource = &mx35pdk_flash_resource, |
| .num_resources = 1, |
| }; |
| |
| static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = { |
| .width = 1, |
| .hw_ecc = 1, |
| .flash_bbt = 1, |
| }; |
| |
| static struct platform_device *devices[] __initdata = { |
| &mx35pdk_flash, |
| }; |
| |
| static iomux_v3_cfg_t mx35pdk_pads[] = { |
| /* UART1 */ |
| MX35_PAD_CTS1__UART1_CTS, |
| MX35_PAD_RTS1__UART1_RTS, |
| MX35_PAD_TXD1__UART1_TXD_MUX, |
| MX35_PAD_RXD1__UART1_RXD_MUX, |
| /* FEC */ |
| MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, |
| MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, |
| MX35_PAD_FEC_RX_DV__FEC_RX_DV, |
| MX35_PAD_FEC_COL__FEC_COL, |
| MX35_PAD_FEC_RDATA0__FEC_RDATA_0, |
| MX35_PAD_FEC_TDATA0__FEC_TDATA_0, |
| MX35_PAD_FEC_TX_EN__FEC_TX_EN, |
| MX35_PAD_FEC_MDC__FEC_MDC, |
| MX35_PAD_FEC_MDIO__FEC_MDIO, |
| MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, |
| MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, |
| MX35_PAD_FEC_CRS__FEC_CRS, |
| MX35_PAD_FEC_RDATA1__FEC_RDATA_1, |
| MX35_PAD_FEC_TDATA1__FEC_TDATA_1, |
| MX35_PAD_FEC_RDATA2__FEC_RDATA_2, |
| MX35_PAD_FEC_TDATA2__FEC_TDATA_2, |
| MX35_PAD_FEC_RDATA3__FEC_RDATA_3, |
| MX35_PAD_FEC_TDATA3__FEC_TDATA_3, |
| /* USBOTG */ |
| MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, |
| MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, |
| /* USBH1 */ |
| MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, |
| MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, |
| /* SDCARD */ |
| MX35_PAD_SD1_CMD__ESDHC1_CMD, |
| MX35_PAD_SD1_CLK__ESDHC1_CLK, |
| MX35_PAD_SD1_DATA0__ESDHC1_DAT0, |
| MX35_PAD_SD1_DATA1__ESDHC1_DAT1, |
| MX35_PAD_SD1_DATA2__ESDHC1_DAT2, |
| MX35_PAD_SD1_DATA3__ESDHC1_DAT3, |
| }; |
| |
| /* OTG config */ |
| static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = { |
| .operating_mode = FSL_USB2_DR_DEVICE, |
| .phy_mode = FSL_USB2_PHY_UTMI_WIDE, |
| }; |
| |
| static struct mxc_usbh_platform_data otg_pdata __initdata = { |
| .portsc = MXC_EHCI_MODE_UTMI, |
| .flags = MXC_EHCI_INTERNAL_PHY, |
| }; |
| |
| /* USB HOST config */ |
| static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { |
| .portsc = MXC_EHCI_MODE_SERIAL, |
| .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | |
| MXC_EHCI_INTERNAL_PHY, |
| }; |
| |
| static int otg_mode_host; |
| |
| static int __init mx35_3ds_otg_mode(char *options) |
| { |
| if (!strcmp(options, "host")) |
| otg_mode_host = 1; |
| else if (!strcmp(options, "device")) |
| otg_mode_host = 0; |
| else |
| pr_info("otg_mode neither \"host\" nor \"device\". " |
| "Defaulting to device\n"); |
| return 0; |
| } |
| __setup("otg_mode=", mx35_3ds_otg_mode); |
| |
| /* |
| * Board specific initialization. |
| */ |
| static void __init mxc_board_init(void) |
| { |
| mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); |
| |
| imx35_add_fec(NULL); |
| imx35_add_imx2_wdt(NULL); |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| |
| imx35_add_imx_uart0(&uart_pdata); |
| |
| if (otg_mode_host) |
| imx35_add_mxc_ehci_otg(&otg_pdata); |
| |
| imx35_add_mxc_ehci_hs(&usb_host_pdata); |
| |
| if (!otg_mode_host) |
| imx35_add_fsl_usb2_udc(&usb_otg_pdata); |
| |
| imx35_add_mxc_nand(&mx35pdk_nand_board_info); |
| imx35_add_sdhci_esdhc_imx(0, NULL); |
| |
| if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT)) |
| pr_warn("Init of the debugboard failed, all " |
| "devices on the debugboard are unusable.\n"); |
| } |
| |
| static void __init mx35pdk_timer_init(void) |
| { |
| mx35_clocks_init(); |
| } |
| |
| struct sys_timer mx35pdk_timer = { |
| .init = mx35pdk_timer_init, |
| }; |
| |
| MACHINE_START(MX35_3DS, "Freescale MX35PDK") |
| /* Maintainer: Freescale Semiconductor, Inc */ |
| .boot_params = MX3x_PHYS_OFFSET + 0x100, |
| .map_io = mx35_map_io, |
| .init_irq = mx35_init_irq, |
| .init_machine = mxc_board_init, |
| .timer = &mx35pdk_timer, |
| MACHINE_END |