blob: dee92182749b9ba1f475bed9d47f9b0557236a8e [file] [log] [blame]
if ARCH_PXA
menu "Intel PXA2xx/PXA3xx Implementations"
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform (aka Lubbock)"
select PXA25x
select SA1111
select PXA_HAVE_BOARD_IRQS
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
select PXA27x
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_ZYLONITE
bool
select PXA3xx
select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_ZYLONITE300
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
select CPU_PXA300
select CPU_PXA310
select MACH_ZYLONITE
config MACH_ZYLONITE320
bool "PXA3xx Development Platform (aka Zylonite) PXA320"
select CPU_PXA320
select MACH_ZYLONITE
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
select CPU_PXA300
select CPU_PXA310
select PXA_SSP
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
select CPU_PXA930
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select CPU_PXA930
comment "Third Party Dev Platforms (sorted by vendor name)"
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
select PXA25x
select ISA
select I2C_GPIO
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
select ARCOM_PCMCIA
config MACH_ARCOM_ZEUS
bool "Arcom/Eurotech ZEUS SBC"
select PXA27x
select ISA
select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
select ARCOM_PCMCIA
config MACH_BALLOON3
bool "Balloon 3 board"
select PXA27x
select IWMMXT
select PXA_HAVE_BOARD_IRQS
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
config CSB726_CSB701
bool "Enable support for CSB701 baseboard"
depends on MACH_CSB726
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select PXA27x
select IWMMXT
select PXA25x
select PXA_SSP
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
config MACH_EXEDA
bool "CompuLab eXeda platform"
select PXA27x
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
select PXA3xx
select CPU_PXA300
select CPU_PXA310
select HAVE_PWM
config ARCH_GUMSTIX
bool "Gumstix XScale 255 boards"
select PXA25x
help
Say Y here if you intend to run this kernel on
Basix, Connex, ws-200ax, ws-400ax systems
choice
prompt "Gumstix Carrier/Expansion Board"
depends on ARCH_GUMSTIX
config GUMSTIX_AM200EPD
bool "Enable AM200EPD board support"
config GUMSTIX_AM300EPD
bool "Enable AM300EPD board support"
endchoice
config MACH_INTELMOTE2
bool "Intel Mote 2 Platform"
select PXA27x
select IWMMXT
select PXA_HAVE_BOARD_IRQS
config MACH_STARGATE2
bool "Intel Stargate 2 Platform"
select PXA27x
select IWMMXT
select PXA_HAVE_BOARD_IRQS
config MACH_XCEP
bool "Iskratel Electronics XCEP"
select PXA25x
select MTD
select MTD_PARTITIONS
select MTD_PHYSMAP
select MTD_CFI_INTELEXT
select MTD_CFI
select MTD_CHAR
select SMC91X
select PXA_SSP
help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
Tuned for usage in Libera instruments for particle accelerators.
config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
select PXA27x
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
select PXA27x
select PXA_SSP
choice
prompt "Select base board for Trizeps module"
depends on TRIZEPS_PXA
config MACH_TRIZEPS_CONXS
bool "ConXS Eval Board"
config MACH_TRIZEPS_UCONXS
bool "uConXS Eval Board"
config MACH_TRIZEPS_ANY
bool "another Board"
endchoice
config ARCOM_PCMCIA
bool
help
Generic option for Arcom Viper/Zeus PCMCIA
config TRIZEPS_PCMCIA
bool
help
Enable PCMCIA support for Trizeps modules
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
select PXA_SSP
select PXA_HAVE_BOARD_IRQS
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
depends on MACH_PCM027
choice
prompt "display on pcm990"
depends on MACH_PCM990_BASEBOARD
config PCM990_DISPLAY_SHARP
bool "sharp lq084v1dg21 stn display"
config PCM990_DISPLAY_NEC
bool "nec nl6448bc20_18d tft display"
config PCM990_DISPLAY_NONE
bool "no display"
endchoice
config MACH_COLIBRI
bool "Toradex Colibri PXA270"
select PXA27x
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
select PXA3xx
select CPU_PXA300
select CPU_PXA310
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
select PXA3xx
select CPU_PXA320
comment "End-user Products (sorted by vendor name)"
config MACH_H4700
bool "HP iPAQ hx4700"
select PXA27x
select IWMMXT
select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_H5000
bool "HP iPAQ h5000"
select PXA25x
config MACH_HIMALAYA
bool "HTC Himalaya Support"
select CPU_PXA26x
select FB_W100
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select PXA27x
select IWMMXT
select HAVE_PWM
select GPIO_SYSFS
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
for this PDA.
config PXA_EZX
bool "Motorola EZX Platform"
select PXA27x
select IWMMXT
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_EZX_A780
bool "Motorola EZX A780"
default y
depends on PXA_EZX
config MACH_EZX_E680
bool "Motorola EZX E680"
default y
depends on PXA_EZX
config MACH_EZX_A1200
bool "Motorola EZX A1200"
default y
depends on PXA_EZX
config MACH_EZX_A910
bool "Motorola EZX A910"
default y
depends on PXA_EZX
config MACH_EZX_E6
bool "Motorola EZX E6"
default y
depends on PXA_EZX
config MACH_EZX_E2
bool "Motorola EZX E2"
default y
depends on PXA_EZX
config MACH_MP900C
bool "Nec Mobilepro 900/c"
select PXA25x
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
select HAVE_PWM
config MACH_PALMTE2
bool "Palm Tungsten|E2"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
handheld computer.
config MACH_PALMTC
bool "Palm Tungsten|C"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|C
handheld computer.
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
config MACH_PALMTX
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
config MACH_PALMZ72
bool "Palm Zire 72"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
config MACH_PALMLD
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
config PALM_TREO
bool
depends on ARCH_PXA_PALM
config MACH_CENTRO
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select PALM_TREO
help
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
smartphone.
config MACH_TREO680
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select PALM_TREO
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
select SHARP_SCOOP
select SHARP_PARAM
help
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
config SHARPSL_PM
bool
select APM_EMULATION
config CORGI_SSP_DEPRECATED
bool
select PXA_SSP
help
This option will include corgi_ssp.c and corgi_lcd.c
that corgi_ts.c and other legacy drivers (corgi_bl.c
and sharpsl_pm.c) may depend on.
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
select PXA25x
select SHARP_LOCOMO
select PXA_SSP
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
select I2C_PXA
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_HAVE_BOARD_IRQS
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
select PXA_HAVE_BOARD_IRQS
config MACH_E330
bool "Toshiba e330"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
config MACH_E350
bool "Toshiba e350"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e350 family PDA.
config MACH_E740
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
config MACH_E750
bool "Toshiba e750"
default y
depends on ARCH_PXA_ESERIES
select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
config MACH_E400
bool "Toshiba e400"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e400 family PDA.
config MACH_E800
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
endmenu
config PXA25x
bool
select CPU_XSCALE
help
Select code specific to PXA21x/25x/26x variants
config PXA27x
bool
select CPU_XSCALE
help
Select code specific to PXA27x variants
config CPU_PXA26x
bool
select PXA25x
help
Select code specific to PXA26x (codename Dalhart)
config PXA3xx
bool
select CPU_XSC3
help
Select code specific to PXA3xx variants
config CPU_PXA300
bool
select PXA3xx
help
PXA300 (codename Monahans-L)
config CPU_PXA310
bool
select CPU_PXA300
help
PXA310 (codename Monahans-LV)
config CPU_PXA320
bool
select PXA3xx
help
PXA320 (codename Monahans-P)
config CPU_PXA930
bool
select PXA3xx
help
PXA930 (codename Tavor-P)
config CPU_PXA935
bool
select CPU_PXA930
help
PXA935 (codename Tavor-P65)
config CPU_PXA950
bool
select CPU_PXA930
help
PXA950 (codename Tavor-PV2)
config PXA_SHARP_C7xx
bool
select PXA_SSP
select SHARPSL_PM
help
Enable support for all Sharp C7xx models
config PXA_SHARP_Cxx00
bool
select PXA_SSP
select SHARPSL_PM
help
Enable common support for Sharp Cxx00 models
config PXA_SSP
tristate
help
Enable support for PXA2xx SSP ports
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA
select RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on tosa.
config PXA_HAVE_BOARD_IRQS
bool
config PXA_HAVE_ISA_IRQS
bool
endif