blob: 5420356eb40734128bf904ab9ac387e6b277f182 [file] [log] [blame]
/*
* linux/arch/arm/mach-omap2/clock.c
*
* Copyright (C) 2005-2008 Texas Instruments, Inc.
* Copyright (C) 2004-2008 Nokia Corporation
*
* Contacts:
* Richard Woodruff <r-woodruff2@ti.com>
* Paul Walmsley
*
* Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
* Gordon McNutt and RidgeRun, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#undef DEBUG
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/cpufreq.h>
#include <linux/bitops.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/prcm.h>
#include <plat/clkdev_omap.h>
#include <asm/div64.h>
#include <asm/clkdev.h>
#include <plat/sdrc.h>
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "cm.h"
#include "cm-regbits-24xx.h"
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
#define EN_APLL_STOPPED 0
#define EN_APLL_LOCKED 3
/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
#define APLLS_CLKIN_19_2MHZ 0
#define APLLS_CLKIN_13MHZ 2
#define APLLS_CLKIN_12MHZ 3
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
const struct prcm_config *curr_prcm_set;
const struct prcm_config *rate_table;
struct clk *vclk, *sclk, *dclk;
void __iomem *prcm_clksrc_ctrl;
/*-------------------------------------------------------------------------
* Omap24xx specific clock functions
*-------------------------------------------------------------------------*/
/**
* omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
*
* OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
* CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
* passes back the correct CM_IDLEST register address for I2CHS
* modules. No return value.
*/
static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
u8 *idlest_bit)
{
*idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
*idlest_bit = clk->enable_bit;
}
/* 2430 I2CHS has non-standard IDLEST register */
const struct clkops clkops_omap2430_i2chs_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = omap2430_clk_i2chs_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
/**
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate
* @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
*
* Returns the CORE_CLK rate. CORE_CLK can have one of three rate
* sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
* (the latter is unusual). This currently should be called with
* struct clk *dpll_ck, which is a composite clock of dpll_ck and
* core_ck.
*/
unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
{
long long core_clk;
u32 v;
core_clk = omap2_get_dpll_rate(clk);
v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
v &= OMAP24XX_CORE_CLK_SRC_MASK;
if (v == CORE_CLK_SRC_32K)
core_clk = 32768;
else
core_clk *= v;
return core_clk;
}
static int omap2_enable_osc_ck(struct clk *clk)
{
u32 pcc;
pcc = __raw_readl(prcm_clksrc_ctrl);
__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
return 0;
}
static void omap2_disable_osc_ck(struct clk *clk)
{
u32 pcc;
pcc = __raw_readl(prcm_clksrc_ctrl);
__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
}
const struct clkops clkops_oscck = {
.enable = omap2_enable_osc_ck,
.disable = omap2_disable_osc_ck,
};
#ifdef OLD_CK
/* Recalculate SYST_CLK */
static void omap2_sys_clk_recalc(struct clk *clk)
{
u32 div = PRCM_CLKSRC_CTRL;
div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */
div >>= clk->rate_offset;
clk->rate = (clk->parent->rate / div);
propagate_rate(clk);
}
#endif /* OLD_CK */
/* Enable an APLL if off */
static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
{
u32 cval, apll_mask;
apll_mask = EN_APLL_LOCKED << clk->enable_bit;
cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
if ((cval & apll_mask) == apll_mask)
return 0; /* apll already enabled */
cval &= ~apll_mask;
cval |= apll_mask;
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), status_mask,
clk->name);
/*
* REVISIT: Should we return an error code if omap2_wait_clock_ready()
* fails?
*/
return 0;
}
static int omap2_clk_apll96_enable(struct clk *clk)
{
return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL);
}
static int omap2_clk_apll54_enable(struct clk *clk)
{
return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL);
}
/* Stop APLL */
static void omap2_clk_apll_disable(struct clk *clk)
{
u32 cval;
cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
}
const struct clkops clkops_apll96 = {
.enable = omap2_clk_apll96_enable,
.disable = omap2_clk_apll_disable,
};
const struct clkops clkops_apll54 = {
.enable = omap2_clk_apll54_enable,
.disable = omap2_clk_apll_disable,
};
/*
* Uses the current prcm set to tell if a rate is valid.
* You can go slower, but not faster within a given rate set.
*/
long omap2_dpllcore_round_rate(unsigned long target_rate)
{
u32 high, low, core_clk_src;
core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
high = curr_prcm_set->dpll_speed * 2;
low = curr_prcm_set->dpll_speed;
} else { /* DPLL clockout x 2 */
high = curr_prcm_set->dpll_speed;
low = curr_prcm_set->dpll_speed / 2;
}
#ifdef DOWN_VARIABLE_DPLL
if (target_rate > high)
return high;
else
return target_rate;
#else
if (target_rate > low)
return high;
else
return low;
#endif
}
unsigned long omap2_dpllcore_recalc(struct clk *clk)
{
return omap2xxx_clk_get_core_rate(clk);
}
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
{
u32 cur_rate, low, mult, div, valid_rate, done_rate;
u32 bypass = 0;
struct prcm_config tmpset;
const struct dpll_data *dd;
cur_rate = omap2xxx_clk_get_core_rate(dclk);
mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
mult &= OMAP24XX_CORE_CLK_SRC_MASK;
if ((rate == (cur_rate / 2)) && (mult == 2)) {
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
} else if (rate != cur_rate) {
valid_rate = omap2_dpllcore_round_rate(rate);
if (valid_rate != rate)
return -EINVAL;
if (mult == 1)
low = curr_prcm_set->dpll_speed;
else
low = curr_prcm_set->dpll_speed / 2;
dd = clk->dpll_data;
if (!dd)
return -EINVAL;
tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
dd->div1_mask);
div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
if (rate > low) {
tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
mult = ((rate / 2) / 1000000);
done_rate = CORE_CLK_SRC_DPLL_X2;
} else {
tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
mult = (rate / 1000000);
done_rate = CORE_CLK_SRC_DPLL;
}
tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
/* Worst case */
tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
bypass = 1;
/* For omap2xxx_sdrc_init_params() */
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
/* Force dll lock mode */
omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
bypass);
/* Errata: ret dll entry state */
omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
omap2xxx_sdrc_reprogram(done_rate, 0);
}
return 0;
}
/**
* omap2_table_mpu_recalc - just return the MPU speed
* @clk: virt_prcm_set struct clk
*
* Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
*/
unsigned long omap2_table_mpu_recalc(struct clk *clk)
{
return curr_prcm_set->mpu_speed;
}
/*
* Look for a rate equal or less than the target rate given a configuration set.
*
* What's not entirely clear is "which" field represents the key field.
* Some might argue L3-DDR, others ARM, others IVA. This code is simple and
* just uses the ARM rates.
*/
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
{
const struct prcm_config *ptr;
long highest_rate;
long sys_ck_rate;
sys_ck_rate = clk_get_rate(sclk);
highest_rate = -EINVAL;
for (ptr = rate_table; ptr->mpu_speed; ptr++) {
if (!(ptr->flags & cpu_mask))
continue;
if (ptr->xtal_speed != sys_ck_rate)
continue;
highest_rate = ptr->mpu_speed;
/* Can check only after xtal frequency check */
if (ptr->mpu_speed <= rate)
break;
}
return highest_rate;
}
/* Sets basic clocks based on the specified rate */
int omap2_select_table_rate(struct clk *clk, unsigned long rate)
{
u32 cur_rate, done_rate, bypass = 0, tmp;
const struct prcm_config *prcm;
unsigned long found_speed = 0;
unsigned long flags;
long sys_ck_rate;
sys_ck_rate = clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sys_ck_rate)
continue;
if (prcm->mpu_speed <= rate) {
found_speed = prcm->mpu_speed;
break;
}
}
if (!found_speed) {
printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
rate / 1000000);
return -EINVAL;
}
curr_prcm_set = prcm;
cur_rate = omap2xxx_clk_get_core_rate(dclk);
if (prcm->dpll_speed == cur_rate / 2) {
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
} else if (prcm->dpll_speed == cur_rate * 2) {
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
} else if (prcm->dpll_speed != cur_rate) {
local_irq_save(flags);
if (prcm->dpll_speed == prcm->xtal_speed)
bypass = 1;
if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
CORE_CLK_SRC_DPLL_X2)
done_rate = CORE_CLK_SRC_DPLL_X2;
else
done_rate = CORE_CLK_SRC_DPLL;
/* MPU divider */
cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
/* dsp + iva1 div(2420), iva2.1(2430) */
cm_write_mod_reg(prcm->cm_clksel_dsp,
OMAP24XX_DSP_MOD, CM_CLKSEL);
cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
/* Major subsystem dividers */
tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
CM_CLKSEL1);
if (cpu_is_omap2430())
cm_write_mod_reg(prcm->cm_clksel_mdm,
OMAP2430_MDM_MOD, CM_CLKSEL);
/* x2 to enter omap2xxx_sdrc_init_params() */
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
bypass);
omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
omap2xxx_sdrc_reprogram(done_rate, 0);
local_irq_restore(flags);
}
return 0;
}
#ifdef CONFIG_CPU_FREQ
/*
* Walk PRCM rate table and fillout cpufreq freq_table
* XXX This should be replaced by an OPP layer in the near future
*/
static struct cpufreq_frequency_table *freq_table;
void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
const struct prcm_config *prcm;
long sys_ck_rate;
int i = 0;
int tbl_sz = 0;
sys_ck_rate = clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sys_ck_rate)
continue;
/* don't put bypass rates in table */
if (prcm->dpll_speed == prcm->xtal_speed)
continue;
tbl_sz++;
}
/*
* XXX Ensure that we're doing what CPUFreq expects for this error
* case and the following one
*/
if (tbl_sz == 0) {
pr_warning("%s: no matching entries in rate_table\n",
__func__);
return;
}
/* Include the CPUFREQ_TABLE_END terminator entry */
tbl_sz++;
freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
GFP_ATOMIC);
if (!freq_table) {
pr_err("%s: could not kzalloc frequency table\n", __func__);
return;
}
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sys_ck_rate)
continue;
/* don't put bypass rates in table */
if (prcm->dpll_speed == prcm->xtal_speed)
continue;
freq_table[i].index = i;
freq_table[i].frequency = prcm->mpu_speed / 1000;
i++;
}
freq_table[i].index = i;
freq_table[i].frequency = CPUFREQ_TABLE_END;
*table = &freq_table[0];
}
void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
{
kfree(freq_table);
}
#endif
struct clk_functions omap2_clk_functions = {
.clk_enable = omap2_clk_enable,
.clk_disable = omap2_clk_disable,
.clk_round_rate = omap2_clk_round_rate,
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
.clk_disable_unused = omap2_clk_disable_unused,
#ifdef CONFIG_CPU_FREQ
.clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
.clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
#endif
};
static u32 omap2_get_apll_clkin(void)
{
u32 aplls, srate = 0;
aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
aplls &= OMAP24XX_APLLS_CLKIN_MASK;
aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
if (aplls == APLLS_CLKIN_19_2MHZ)
srate = 19200000;
else if (aplls == APLLS_CLKIN_13MHZ)
srate = 13000000;
else if (aplls == APLLS_CLKIN_12MHZ)
srate = 12000000;
return srate;
}
static u32 omap2_get_sysclkdiv(void)
{
u32 div;
div = __raw_readl(prcm_clksrc_ctrl);
div &= OMAP_SYSCLKDIV_MASK;
div >>= OMAP_SYSCLKDIV_SHIFT;
return div;
}
unsigned long omap2_osc_clk_recalc(struct clk *clk)
{
return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
}
unsigned long omap2_sys_clk_recalc(struct clk *clk)
{
return clk->parent->rate / omap2_get_sysclkdiv();
}
/*
* Set clocks for bypass mode for reboot to work.
*/
void omap2_clk_prepare_for_reboot(void)
{
u32 rate;
if (vclk == NULL || sclk == NULL)
return;
rate = clk_get_rate(sclk);
clk_set_rate(vclk, rate);
}
/*
* Switch the MPU rate if specified on cmdline.
* We cannot do this early until cmdline is parsed.
*/
static int __init omap2_clk_arch_init(void)
{
struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck;
unsigned long sys_ck_rate;
if (!mpurate)
return -EINVAL;
virt_prcm_set = clk_get(NULL, "virt_prcm_set");
sys_ck = clk_get(NULL, "sys_ck");
dpll_ck = clk_get(NULL, "dpll_ck");
mpu_ck = clk_get(NULL, "mpu_ck");
if (clk_set_rate(virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n");
recalculate_root_clocks();
sys_ck_rate = clk_get_rate(sys_ck);
pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10,
(clk_get_rate(dpll_ck) / 1000000),
(clk_get_rate(mpu_ck) / 1000000));
return 0;
}
arch_initcall(omap2_clk_arch_init);