| /******************************************************************************* |
| * |
| * Intel Ethernet Controller XL710 Family Linux Driver |
| * Copyright(c) 2013 - 2014 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| * The full GNU General Public License is included in this distribution in |
| * the file called "COPYING". |
| * |
| * Contact Information: |
| * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| ******************************************************************************/ |
| |
| #include "i40e_type.h" |
| #include "i40e_adminq.h" |
| #include "i40e_prototype.h" |
| #include "i40e_virtchnl.h" |
| |
| /** |
| * i40e_set_mac_type - Sets MAC type |
| * @hw: pointer to the HW structure |
| * |
| * This function sets the mac type of the adapter based on the |
| * vendor ID and device ID stored in the hw structure. |
| **/ |
| static i40e_status i40e_set_mac_type(struct i40e_hw *hw) |
| { |
| i40e_status status = 0; |
| |
| if (hw->vendor_id == PCI_VENDOR_ID_INTEL) { |
| switch (hw->device_id) { |
| case I40E_DEV_ID_SFP_XL710: |
| case I40E_DEV_ID_SFP_X710: |
| case I40E_DEV_ID_QEMU: |
| case I40E_DEV_ID_KX_A: |
| case I40E_DEV_ID_KX_B: |
| case I40E_DEV_ID_KX_C: |
| case I40E_DEV_ID_KX_D: |
| case I40E_DEV_ID_QSFP_A: |
| case I40E_DEV_ID_QSFP_B: |
| case I40E_DEV_ID_QSFP_C: |
| hw->mac.type = I40E_MAC_XL710; |
| break; |
| case I40E_DEV_ID_VF: |
| case I40E_DEV_ID_VF_HV: |
| hw->mac.type = I40E_MAC_VF; |
| break; |
| default: |
| hw->mac.type = I40E_MAC_GENERIC; |
| break; |
| } |
| } else { |
| status = I40E_ERR_DEVICE_NOT_SUPPORTED; |
| } |
| |
| hw_dbg(hw, "i40e_set_mac_type found mac: %d, returns: %d\n", |
| hw->mac.type, status); |
| return status; |
| } |
| |
| /** |
| * i40e_debug_aq |
| * @hw: debug mask related to admin queue |
| * @mask: debug mask |
| * @desc: pointer to admin queue descriptor |
| * @buffer: pointer to command buffer |
| * |
| * Dumps debug log about adminq command with descriptor contents. |
| **/ |
| void i40e_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask, void *desc, |
| void *buffer) |
| { |
| struct i40e_aq_desc *aq_desc = (struct i40e_aq_desc *)desc; |
| u8 *aq_buffer = (u8 *)buffer; |
| u32 data[4]; |
| u32 i = 0; |
| |
| if ((!(mask & hw->debug_mask)) || (desc == NULL)) |
| return; |
| |
| i40e_debug(hw, mask, |
| "AQ CMD: opcode 0x%04X, flags 0x%04X, datalen 0x%04X, retval 0x%04X\n", |
| aq_desc->opcode, aq_desc->flags, aq_desc->datalen, |
| aq_desc->retval); |
| i40e_debug(hw, mask, "\tcookie (h,l) 0x%08X 0x%08X\n", |
| aq_desc->cookie_high, aq_desc->cookie_low); |
| i40e_debug(hw, mask, "\tparam (0,1) 0x%08X 0x%08X\n", |
| aq_desc->params.internal.param0, |
| aq_desc->params.internal.param1); |
| i40e_debug(hw, mask, "\taddr (h,l) 0x%08X 0x%08X\n", |
| aq_desc->params.external.addr_high, |
| aq_desc->params.external.addr_low); |
| |
| if ((buffer != NULL) && (aq_desc->datalen != 0)) { |
| memset(data, 0, sizeof(data)); |
| i40e_debug(hw, mask, "AQ CMD Buffer:\n"); |
| for (i = 0; i < le16_to_cpu(aq_desc->datalen); i++) { |
| data[((i % 16) / 4)] |= |
| ((u32)aq_buffer[i]) << (8 * (i % 4)); |
| if ((i % 16) == 15) { |
| i40e_debug(hw, mask, |
| "\t0x%04X %08X %08X %08X %08X\n", |
| i - 15, data[0], data[1], data[2], |
| data[3]); |
| memset(data, 0, sizeof(data)); |
| } |
| } |
| if ((i % 16) != 0) |
| i40e_debug(hw, mask, "\t0x%04X %08X %08X %08X %08X\n", |
| i - (i % 16), data[0], data[1], data[2], |
| data[3]); |
| } |
| } |
| |
| /** |
| * i40e_check_asq_alive |
| * @hw: pointer to the hw struct |
| * |
| * Returns true if Queue is enabled else false. |
| **/ |
| bool i40e_check_asq_alive(struct i40e_hw *hw) |
| { |
| return !!(rd32(hw, hw->aq.asq.len) & I40E_PF_ATQLEN_ATQENABLE_MASK); |
| } |
| |
| /** |
| * i40e_aq_queue_shutdown |
| * @hw: pointer to the hw struct |
| * @unloading: is the driver unloading itself |
| * |
| * Tell the Firmware that we're shutting down the AdminQ and whether |
| * or not the driver is unloading as well. |
| **/ |
| i40e_status i40e_aq_queue_shutdown(struct i40e_hw *hw, |
| bool unloading) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_queue_shutdown *cmd = |
| (struct i40e_aqc_queue_shutdown *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_queue_shutdown); |
| |
| if (unloading) |
| cmd->driver_unloading = cpu_to_le32(I40E_AQ_DRIVER_UNLOADING); |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, NULL); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_init_shared_code - Initialize the shared code |
| * @hw: pointer to hardware structure |
| * |
| * This assigns the MAC type and PHY code and inits the NVM. |
| * Does not touch the hardware. This function must be called prior to any |
| * other function in the shared code. The i40e_hw structure should be |
| * memset to 0 prior to calling this function. The following fields in |
| * hw structure should be filled in prior to calling this function: |
| * hw_addr, back, device_id, vendor_id, subsystem_device_id, |
| * subsystem_vendor_id, and revision_id |
| **/ |
| i40e_status i40e_init_shared_code(struct i40e_hw *hw) |
| { |
| i40e_status status = 0; |
| u32 reg; |
| |
| i40e_set_mac_type(hw); |
| |
| switch (hw->mac.type) { |
| case I40E_MAC_XL710: |
| break; |
| default: |
| return I40E_ERR_DEVICE_NOT_SUPPORTED; |
| break; |
| } |
| |
| hw->phy.get_link_info = true; |
| |
| /* Determine port number */ |
| reg = rd32(hw, I40E_PFGEN_PORTNUM); |
| reg = ((reg & I40E_PFGEN_PORTNUM_PORT_NUM_MASK) >> |
| I40E_PFGEN_PORTNUM_PORT_NUM_SHIFT); |
| hw->port = (u8)reg; |
| |
| /* Determine the PF number based on the PCI fn */ |
| reg = rd32(hw, I40E_GLPCI_CAPSUP); |
| if (reg & I40E_GLPCI_CAPSUP_ARI_EN_MASK) |
| hw->pf_id = (u8)((hw->bus.device << 3) | hw->bus.func); |
| else |
| hw->pf_id = (u8)hw->bus.func; |
| |
| status = i40e_init_nvm(hw); |
| return status; |
| } |
| |
| /** |
| * i40e_aq_mac_address_read - Retrieve the MAC addresses |
| * @hw: pointer to the hw struct |
| * @flags: a return indicator of what addresses were added to the addr store |
| * @addrs: the requestor's mac addr store |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| static i40e_status i40e_aq_mac_address_read(struct i40e_hw *hw, |
| u16 *flags, |
| struct i40e_aqc_mac_address_read_data *addrs, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_mac_address_read *cmd_data = |
| (struct i40e_aqc_mac_address_read *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_mac_address_read); |
| desc.flags |= cpu_to_le16(I40E_AQ_FLAG_BUF); |
| |
| status = i40e_asq_send_command(hw, &desc, addrs, |
| sizeof(*addrs), cmd_details); |
| *flags = le16_to_cpu(cmd_data->command_flags); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_mac_address_write - Change the MAC addresses |
| * @hw: pointer to the hw struct |
| * @flags: indicates which MAC to be written |
| * @mac_addr: address to write |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_mac_address_write(struct i40e_hw *hw, |
| u16 flags, u8 *mac_addr, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_mac_address_write *cmd_data = |
| (struct i40e_aqc_mac_address_write *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_mac_address_write); |
| cmd_data->command_flags = cpu_to_le16(flags); |
| cmd_data->mac_sah = cpu_to_le16((u16)mac_addr[0] << 8 | mac_addr[1]); |
| cmd_data->mac_sal = cpu_to_le32(((u32)mac_addr[2] << 24) | |
| ((u32)mac_addr[3] << 16) | |
| ((u32)mac_addr[4] << 8) | |
| mac_addr[5]); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_get_mac_addr - get MAC address |
| * @hw: pointer to the HW structure |
| * @mac_addr: pointer to MAC address |
| * |
| * Reads the adapter's MAC address from register |
| **/ |
| i40e_status i40e_get_mac_addr(struct i40e_hw *hw, u8 *mac_addr) |
| { |
| struct i40e_aqc_mac_address_read_data addrs; |
| i40e_status status; |
| u16 flags = 0; |
| |
| status = i40e_aq_mac_address_read(hw, &flags, &addrs, NULL); |
| |
| if (flags & I40E_AQC_LAN_ADDR_VALID) |
| memcpy(mac_addr, &addrs.pf_lan_mac, sizeof(addrs.pf_lan_mac)); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_get_media_type - Gets media type |
| * @hw: pointer to the hardware structure |
| **/ |
| static enum i40e_media_type i40e_get_media_type(struct i40e_hw *hw) |
| { |
| enum i40e_media_type media; |
| |
| switch (hw->phy.link_info.phy_type) { |
| case I40E_PHY_TYPE_10GBASE_SR: |
| case I40E_PHY_TYPE_10GBASE_LR: |
| case I40E_PHY_TYPE_40GBASE_SR4: |
| case I40E_PHY_TYPE_40GBASE_LR4: |
| media = I40E_MEDIA_TYPE_FIBER; |
| break; |
| case I40E_PHY_TYPE_100BASE_TX: |
| case I40E_PHY_TYPE_1000BASE_T: |
| case I40E_PHY_TYPE_10GBASE_T: |
| media = I40E_MEDIA_TYPE_BASET; |
| break; |
| case I40E_PHY_TYPE_10GBASE_CR1_CU: |
| case I40E_PHY_TYPE_40GBASE_CR4_CU: |
| case I40E_PHY_TYPE_10GBASE_CR1: |
| case I40E_PHY_TYPE_40GBASE_CR4: |
| case I40E_PHY_TYPE_10GBASE_SFPP_CU: |
| media = I40E_MEDIA_TYPE_DA; |
| break; |
| case I40E_PHY_TYPE_1000BASE_KX: |
| case I40E_PHY_TYPE_10GBASE_KX4: |
| case I40E_PHY_TYPE_10GBASE_KR: |
| case I40E_PHY_TYPE_40GBASE_KR4: |
| media = I40E_MEDIA_TYPE_BACKPLANE; |
| break; |
| case I40E_PHY_TYPE_SGMII: |
| case I40E_PHY_TYPE_XAUI: |
| case I40E_PHY_TYPE_XFI: |
| case I40E_PHY_TYPE_XLAUI: |
| case I40E_PHY_TYPE_XLPPI: |
| default: |
| media = I40E_MEDIA_TYPE_UNKNOWN; |
| break; |
| } |
| |
| return media; |
| } |
| |
| #define I40E_PF_RESET_WAIT_COUNT_A0 200 |
| #define I40E_PF_RESET_WAIT_COUNT 10 |
| /** |
| * i40e_pf_reset - Reset the PF |
| * @hw: pointer to the hardware structure |
| * |
| * Assuming someone else has triggered a global reset, |
| * assure the global reset is complete and then reset the PF |
| **/ |
| i40e_status i40e_pf_reset(struct i40e_hw *hw) |
| { |
| u32 cnt = 0; |
| u32 cnt1 = 0; |
| u32 reg = 0; |
| u32 grst_del; |
| |
| /* Poll for Global Reset steady state in case of recent GRST. |
| * The grst delay value is in 100ms units, and we'll wait a |
| * couple counts longer to be sure we don't just miss the end. |
| */ |
| grst_del = rd32(hw, I40E_GLGEN_RSTCTL) & I40E_GLGEN_RSTCTL_GRSTDEL_MASK |
| >> I40E_GLGEN_RSTCTL_GRSTDEL_SHIFT; |
| for (cnt = 0; cnt < grst_del + 2; cnt++) { |
| reg = rd32(hw, I40E_GLGEN_RSTAT); |
| if (!(reg & I40E_GLGEN_RSTAT_DEVSTATE_MASK)) |
| break; |
| msleep(100); |
| } |
| if (reg & I40E_GLGEN_RSTAT_DEVSTATE_MASK) { |
| hw_dbg(hw, "Global reset polling failed to complete.\n"); |
| return I40E_ERR_RESET_FAILED; |
| } |
| |
| /* Now Wait for the FW to be ready */ |
| for (cnt1 = 0; cnt1 < I40E_PF_RESET_WAIT_COUNT; cnt1++) { |
| reg = rd32(hw, I40E_GLNVM_ULD); |
| reg &= (I40E_GLNVM_ULD_CONF_CORE_DONE_MASK | |
| I40E_GLNVM_ULD_CONF_GLOBAL_DONE_MASK); |
| if (reg == (I40E_GLNVM_ULD_CONF_CORE_DONE_MASK | |
| I40E_GLNVM_ULD_CONF_GLOBAL_DONE_MASK)) { |
| hw_dbg(hw, "Core and Global modules ready %d\n", cnt1); |
| break; |
| } |
| usleep_range(10000, 20000); |
| } |
| if (!(reg & (I40E_GLNVM_ULD_CONF_CORE_DONE_MASK | |
| I40E_GLNVM_ULD_CONF_GLOBAL_DONE_MASK))) { |
| hw_dbg(hw, "wait for FW Reset complete timedout\n"); |
| hw_dbg(hw, "I40E_GLNVM_ULD = 0x%x\n", reg); |
| return I40E_ERR_RESET_FAILED; |
| } |
| |
| /* If there was a Global Reset in progress when we got here, |
| * we don't need to do the PF Reset |
| */ |
| if (!cnt) { |
| if (hw->revision_id == 0) |
| cnt = I40E_PF_RESET_WAIT_COUNT_A0; |
| else |
| cnt = I40E_PF_RESET_WAIT_COUNT; |
| reg = rd32(hw, I40E_PFGEN_CTRL); |
| wr32(hw, I40E_PFGEN_CTRL, |
| (reg | I40E_PFGEN_CTRL_PFSWR_MASK)); |
| for (; cnt; cnt--) { |
| reg = rd32(hw, I40E_PFGEN_CTRL); |
| if (!(reg & I40E_PFGEN_CTRL_PFSWR_MASK)) |
| break; |
| usleep_range(1000, 2000); |
| } |
| if (reg & I40E_PFGEN_CTRL_PFSWR_MASK) { |
| hw_dbg(hw, "PF reset polling failed to complete.\n"); |
| return I40E_ERR_RESET_FAILED; |
| } |
| } |
| |
| i40e_clear_pxe_mode(hw); |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_clear_pxe_mode - clear pxe operations mode |
| * @hw: pointer to the hw struct |
| * |
| * Make sure all PXE mode settings are cleared, including things |
| * like descriptor fetch/write-back mode. |
| **/ |
| void i40e_clear_pxe_mode(struct i40e_hw *hw) |
| { |
| u32 reg; |
| |
| /* Clear single descriptor fetch/write-back mode */ |
| reg = rd32(hw, I40E_GLLAN_RCTL_0); |
| |
| if (hw->revision_id == 0) { |
| /* As a work around clear PXE_MODE instead of setting it */ |
| wr32(hw, I40E_GLLAN_RCTL_0, (reg & (~I40E_GLLAN_RCTL_0_PXE_MODE_MASK))); |
| } else { |
| wr32(hw, I40E_GLLAN_RCTL_0, (reg | I40E_GLLAN_RCTL_0_PXE_MODE_MASK)); |
| } |
| } |
| |
| /** |
| * i40e_led_is_mine - helper to find matching led |
| * @hw: pointer to the hw struct |
| * @idx: index into GPIO registers |
| * |
| * returns: 0 if no match, otherwise the value of the GPIO_CTL register |
| */ |
| static u32 i40e_led_is_mine(struct i40e_hw *hw, int idx) |
| { |
| u32 gpio_val = 0; |
| u32 port; |
| |
| if (!hw->func_caps.led[idx]) |
| return 0; |
| |
| gpio_val = rd32(hw, I40E_GLGEN_GPIO_CTL(idx)); |
| port = (gpio_val & I40E_GLGEN_GPIO_CTL_PRT_NUM_MASK) >> |
| I40E_GLGEN_GPIO_CTL_PRT_NUM_SHIFT; |
| |
| /* if PRT_NUM_NA is 1 then this LED is not port specific, OR |
| * if it is not our port then ignore |
| */ |
| if ((gpio_val & I40E_GLGEN_GPIO_CTL_PRT_NUM_NA_MASK) || |
| (port != hw->port)) |
| return 0; |
| |
| return gpio_val; |
| } |
| |
| #define I40E_LED0 22 |
| #define I40E_LINK_ACTIVITY 0xC |
| |
| /** |
| * i40e_led_get - return current on/off mode |
| * @hw: pointer to the hw struct |
| * |
| * The value returned is the 'mode' field as defined in the |
| * GPIO register definitions: 0x0 = off, 0xf = on, and other |
| * values are variations of possible behaviors relating to |
| * blink, link, and wire. |
| **/ |
| u32 i40e_led_get(struct i40e_hw *hw) |
| { |
| u32 mode = 0; |
| int i; |
| |
| /* as per the documentation GPIO 22-29 are the LED |
| * GPIO pins named LED0..LED7 |
| */ |
| for (i = I40E_LED0; i <= I40E_GLGEN_GPIO_CTL_MAX_INDEX; i++) { |
| u32 gpio_val = i40e_led_is_mine(hw, i); |
| |
| if (!gpio_val) |
| continue; |
| |
| mode = (gpio_val & I40E_GLGEN_GPIO_CTL_LED_MODE_MASK) >> |
| I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT; |
| break; |
| } |
| |
| return mode; |
| } |
| |
| /** |
| * i40e_led_set - set new on/off mode |
| * @hw: pointer to the hw struct |
| * @mode: 0=off, 0xf=on (else see manual for mode details) |
| * @blink: true if the LED should blink when on, false if steady |
| * |
| * if this function is used to turn on the blink it should |
| * be used to disable the blink when restoring the original state. |
| **/ |
| void i40e_led_set(struct i40e_hw *hw, u32 mode, bool blink) |
| { |
| int i; |
| |
| if (mode & 0xfffffff0) |
| hw_dbg(hw, "invalid mode passed in %X\n", mode); |
| |
| /* as per the documentation GPIO 22-29 are the LED |
| * GPIO pins named LED0..LED7 |
| */ |
| for (i = I40E_LED0; i <= I40E_GLGEN_GPIO_CTL_MAX_INDEX; i++) { |
| u32 gpio_val = i40e_led_is_mine(hw, i); |
| |
| if (!gpio_val) |
| continue; |
| |
| gpio_val &= ~I40E_GLGEN_GPIO_CTL_LED_MODE_MASK; |
| /* this & is a bit of paranoia, but serves as a range check */ |
| gpio_val |= ((mode << I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT) & |
| I40E_GLGEN_GPIO_CTL_LED_MODE_MASK); |
| |
| if (mode == I40E_LINK_ACTIVITY) |
| blink = false; |
| |
| gpio_val |= (blink ? 1 : 0) << |
| I40E_GLGEN_GPIO_CTL_LED_BLINK_SHIFT; |
| |
| wr32(hw, I40E_GLGEN_GPIO_CTL(i), gpio_val); |
| break; |
| } |
| } |
| |
| /* Admin command wrappers */ |
| |
| /** |
| * i40e_aq_set_link_restart_an |
| * @hw: pointer to the hw struct |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Sets up the link and restarts the Auto-Negotiation over the link. |
| **/ |
| i40e_status i40e_aq_set_link_restart_an(struct i40e_hw *hw, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_link_restart_an *cmd = |
| (struct i40e_aqc_set_link_restart_an *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_link_restart_an); |
| |
| cmd->command = I40E_AQ_PHY_RESTART_AN; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_link_info |
| * @hw: pointer to the hw struct |
| * @enable_lse: enable/disable LinkStatusEvent reporting |
| * @link: pointer to link status structure - optional |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Returns the link status of the adapter. |
| **/ |
| i40e_status i40e_aq_get_link_info(struct i40e_hw *hw, |
| bool enable_lse, struct i40e_link_status *link, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_get_link_status *resp = |
| (struct i40e_aqc_get_link_status *)&desc.params.raw; |
| struct i40e_link_status *hw_link_info = &hw->phy.link_info; |
| i40e_status status; |
| u16 command_flags; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_get_link_status); |
| |
| if (enable_lse) |
| command_flags = I40E_AQ_LSE_ENABLE; |
| else |
| command_flags = I40E_AQ_LSE_DISABLE; |
| resp->command_flags = cpu_to_le16(command_flags); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (status) |
| goto aq_get_link_info_exit; |
| |
| /* save off old link status information */ |
| hw->phy.link_info_old = *hw_link_info; |
| |
| /* update link status */ |
| hw_link_info->phy_type = (enum i40e_aq_phy_type)resp->phy_type; |
| hw->phy.media_type = i40e_get_media_type(hw); |
| hw_link_info->link_speed = (enum i40e_aq_link_speed)resp->link_speed; |
| hw_link_info->link_info = resp->link_info; |
| hw_link_info->an_info = resp->an_info; |
| hw_link_info->ext_info = resp->ext_info; |
| hw_link_info->loopback = resp->loopback; |
| |
| if (resp->command_flags & cpu_to_le16(I40E_AQ_LSE_ENABLE)) |
| hw_link_info->lse_enable = true; |
| else |
| hw_link_info->lse_enable = false; |
| |
| /* save link status information */ |
| if (link) |
| *link = *hw_link_info; |
| |
| /* flag cleared so helper functions don't call AQ again */ |
| hw->phy.get_link_info = false; |
| |
| aq_get_link_info_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_add_vsi |
| * @hw: pointer to the hw struct |
| * @vsi_ctx: pointer to a vsi context struct |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Add a VSI context to the hardware. |
| **/ |
| i40e_status i40e_aq_add_vsi(struct i40e_hw *hw, |
| struct i40e_vsi_context *vsi_ctx, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_get_update_vsi *cmd = |
| (struct i40e_aqc_add_get_update_vsi *)&desc.params.raw; |
| struct i40e_aqc_add_get_update_vsi_completion *resp = |
| (struct i40e_aqc_add_get_update_vsi_completion *) |
| &desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_add_vsi); |
| |
| cmd->uplink_seid = cpu_to_le16(vsi_ctx->uplink_seid); |
| cmd->connection_type = vsi_ctx->connection_type; |
| cmd->vf_id = vsi_ctx->vf_num; |
| cmd->vsi_flags = cpu_to_le16(vsi_ctx->flags); |
| |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| if (sizeof(vsi_ctx->info) > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, &vsi_ctx->info, |
| sizeof(vsi_ctx->info), cmd_details); |
| |
| if (status) |
| goto aq_add_vsi_exit; |
| |
| vsi_ctx->seid = le16_to_cpu(resp->seid); |
| vsi_ctx->vsi_number = le16_to_cpu(resp->vsi_number); |
| vsi_ctx->vsis_allocated = le16_to_cpu(resp->vsi_used); |
| vsi_ctx->vsis_unallocated = le16_to_cpu(resp->vsi_free); |
| |
| aq_add_vsi_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_vsi_unicast_promiscuous |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @set: set unicast promiscuous enable/disable |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_set_vsi_unicast_promiscuous(struct i40e_hw *hw, |
| u16 seid, bool set, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw; |
| i40e_status status; |
| u16 flags = 0; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| |
| if (set) |
| flags |= I40E_AQC_SET_VSI_PROMISC_UNICAST; |
| |
| cmd->promiscuous_flags = cpu_to_le16(flags); |
| |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_UNICAST); |
| |
| cmd->seid = cpu_to_le16(seid); |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_vsi_multicast_promiscuous |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @set: set multicast promiscuous enable/disable |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_set_vsi_multicast_promiscuous(struct i40e_hw *hw, |
| u16 seid, bool set, struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw; |
| i40e_status status; |
| u16 flags = 0; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| |
| if (set) |
| flags |= I40E_AQC_SET_VSI_PROMISC_MULTICAST; |
| |
| cmd->promiscuous_flags = cpu_to_le16(flags); |
| |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_MULTICAST); |
| |
| cmd->seid = cpu_to_le16(seid); |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_vsi_broadcast |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @set_filter: true to set filter, false to clear filter |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Set or clear the broadcast promiscuous flag (filter) for a given VSI. |
| **/ |
| i40e_status i40e_aq_set_vsi_broadcast(struct i40e_hw *hw, |
| u16 seid, bool set_filter, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| |
| if (set_filter) |
| cmd->promiscuous_flags |
| |= cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_BROADCAST); |
| else |
| cmd->promiscuous_flags |
| &= cpu_to_le16(~I40E_AQC_SET_VSI_PROMISC_BROADCAST); |
| |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_BROADCAST); |
| cmd->seid = cpu_to_le16(seid); |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_get_vsi_params - get VSI configuration info |
| * @hw: pointer to the hw struct |
| * @vsi_ctx: pointer to a vsi context struct |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_get_vsi_params(struct i40e_hw *hw, |
| struct i40e_vsi_context *vsi_ctx, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_get_update_vsi *cmd = |
| (struct i40e_aqc_add_get_update_vsi *)&desc.params.raw; |
| struct i40e_aqc_add_get_update_vsi_completion *resp = |
| (struct i40e_aqc_add_get_update_vsi_completion *) |
| &desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_get_vsi_parameters); |
| |
| cmd->uplink_seid = cpu_to_le16(vsi_ctx->seid); |
| |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (sizeof(vsi_ctx->info) > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, &vsi_ctx->info, |
| sizeof(vsi_ctx->info), NULL); |
| |
| if (status) |
| goto aq_get_vsi_params_exit; |
| |
| vsi_ctx->seid = le16_to_cpu(resp->seid); |
| vsi_ctx->vsi_number = le16_to_cpu(resp->vsi_number); |
| vsi_ctx->vsis_allocated = le16_to_cpu(resp->vsi_used); |
| vsi_ctx->vsis_unallocated = le16_to_cpu(resp->vsi_free); |
| |
| aq_get_vsi_params_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_update_vsi_params |
| * @hw: pointer to the hw struct |
| * @vsi_ctx: pointer to a vsi context struct |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Update a VSI context. |
| **/ |
| i40e_status i40e_aq_update_vsi_params(struct i40e_hw *hw, |
| struct i40e_vsi_context *vsi_ctx, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_get_update_vsi *cmd = |
| (struct i40e_aqc_add_get_update_vsi *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_update_vsi_parameters); |
| cmd->uplink_seid = cpu_to_le16(vsi_ctx->seid); |
| |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| if (sizeof(vsi_ctx->info) > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, &vsi_ctx->info, |
| sizeof(vsi_ctx->info), cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_switch_config |
| * @hw: pointer to the hardware structure |
| * @buf: pointer to the result buffer |
| * @buf_size: length of input buffer |
| * @start_seid: seid to start for the report, 0 == beginning |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Fill the buf with switch configuration returned from AdminQ command |
| **/ |
| i40e_status i40e_aq_get_switch_config(struct i40e_hw *hw, |
| struct i40e_aqc_get_switch_config_resp *buf, |
| u16 buf_size, u16 *start_seid, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_switch_seid *scfg = |
| (struct i40e_aqc_switch_seid *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_get_switch_config); |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (buf_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| scfg->seid = cpu_to_le16(*start_seid); |
| |
| status = i40e_asq_send_command(hw, &desc, buf, buf_size, cmd_details); |
| *start_seid = le16_to_cpu(scfg->seid); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_firmware_version |
| * @hw: pointer to the hw struct |
| * @fw_major_version: firmware major version |
| * @fw_minor_version: firmware minor version |
| * @api_major_version: major queue version |
| * @api_minor_version: minor queue version |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Get the firmware version from the admin queue commands |
| **/ |
| i40e_status i40e_aq_get_firmware_version(struct i40e_hw *hw, |
| u16 *fw_major_version, u16 *fw_minor_version, |
| u16 *api_major_version, u16 *api_minor_version, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_get_version *resp = |
| (struct i40e_aqc_get_version *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_get_version); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (!status) { |
| if (fw_major_version != NULL) |
| *fw_major_version = le16_to_cpu(resp->fw_major); |
| if (fw_minor_version != NULL) |
| *fw_minor_version = le16_to_cpu(resp->fw_minor); |
| if (api_major_version != NULL) |
| *api_major_version = le16_to_cpu(resp->api_major); |
| if (api_minor_version != NULL) |
| *api_minor_version = le16_to_cpu(resp->api_minor); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_send_driver_version |
| * @hw: pointer to the hw struct |
| * @dv: driver's major, minor version |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Send the driver version to the firmware |
| **/ |
| i40e_status i40e_aq_send_driver_version(struct i40e_hw *hw, |
| struct i40e_driver_version *dv, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_driver_version *cmd = |
| (struct i40e_aqc_driver_version *)&desc.params.raw; |
| i40e_status status; |
| |
| if (dv == NULL) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_driver_version); |
| |
| desc.flags |= cpu_to_le16(I40E_AQ_FLAG_SI); |
| cmd->driver_major_ver = dv->major_version; |
| cmd->driver_minor_ver = dv->minor_version; |
| cmd->driver_build_ver = dv->build_version; |
| cmd->driver_subbuild_ver = dv->subbuild_version; |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_get_link_status - get status of the HW network link |
| * @hw: pointer to the hw struct |
| * |
| * Returns true if link is up, false if link is down. |
| * |
| * Side effect: LinkStatusEvent reporting becomes enabled |
| **/ |
| bool i40e_get_link_status(struct i40e_hw *hw) |
| { |
| i40e_status status = 0; |
| bool link_status = false; |
| |
| if (hw->phy.get_link_info) { |
| status = i40e_aq_get_link_info(hw, true, NULL, NULL); |
| |
| if (status) |
| goto i40e_get_link_status_exit; |
| } |
| |
| link_status = hw->phy.link_info.link_info & I40E_AQ_LINK_UP; |
| |
| i40e_get_link_status_exit: |
| return link_status; |
| } |
| |
| /** |
| * i40e_aq_add_veb - Insert a VEB between the VSI and the MAC |
| * @hw: pointer to the hw struct |
| * @uplink_seid: the MAC or other gizmo SEID |
| * @downlink_seid: the VSI SEID |
| * @enabled_tc: bitmap of TCs to be enabled |
| * @default_port: true for default port VSI, false for control port |
| * @enable_l2_filtering: true to add L2 filter table rules to regular forwarding rules for cloud support |
| * @veb_seid: pointer to where to put the resulting VEB SEID |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * This asks the FW to add a VEB between the uplink and downlink |
| * elements. If the uplink SEID is 0, this will be a floating VEB. |
| **/ |
| i40e_status i40e_aq_add_veb(struct i40e_hw *hw, u16 uplink_seid, |
| u16 downlink_seid, u8 enabled_tc, |
| bool default_port, bool enable_l2_filtering, |
| u16 *veb_seid, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_veb *cmd = |
| (struct i40e_aqc_add_veb *)&desc.params.raw; |
| struct i40e_aqc_add_veb_completion *resp = |
| (struct i40e_aqc_add_veb_completion *)&desc.params.raw; |
| i40e_status status; |
| u16 veb_flags = 0; |
| |
| /* SEIDs need to either both be set or both be 0 for floating VEB */ |
| if (!!uplink_seid != !!downlink_seid) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_add_veb); |
| |
| cmd->uplink_seid = cpu_to_le16(uplink_seid); |
| cmd->downlink_seid = cpu_to_le16(downlink_seid); |
| cmd->enable_tcs = enabled_tc; |
| if (!uplink_seid) |
| veb_flags |= I40E_AQC_ADD_VEB_FLOATING; |
| if (default_port) |
| veb_flags |= I40E_AQC_ADD_VEB_PORT_TYPE_DEFAULT; |
| else |
| veb_flags |= I40E_AQC_ADD_VEB_PORT_TYPE_DATA; |
| |
| if (enable_l2_filtering) |
| veb_flags |= I40E_AQC_ADD_VEB_ENABLE_L2_FILTER; |
| |
| cmd->veb_flags = cpu_to_le16(veb_flags); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (!status && veb_seid) |
| *veb_seid = le16_to_cpu(resp->veb_seid); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_veb_parameters - Retrieve VEB parameters |
| * @hw: pointer to the hw struct |
| * @veb_seid: the SEID of the VEB to query |
| * @switch_id: the uplink switch id |
| * @floating: set to true if the VEB is floating |
| * @statistic_index: index of the stats counter block for this VEB |
| * @vebs_used: number of VEB's used by function |
| * @vebs_free: total VEB's not reserved by any function |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * This retrieves the parameters for a particular VEB, specified by |
| * uplink_seid, and returns them to the caller. |
| **/ |
| i40e_status i40e_aq_get_veb_parameters(struct i40e_hw *hw, |
| u16 veb_seid, u16 *switch_id, |
| bool *floating, u16 *statistic_index, |
| u16 *vebs_used, u16 *vebs_free, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_get_veb_parameters_completion *cmd_resp = |
| (struct i40e_aqc_get_veb_parameters_completion *) |
| &desc.params.raw; |
| i40e_status status; |
| |
| if (veb_seid == 0) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_get_veb_parameters); |
| cmd_resp->seid = cpu_to_le16(veb_seid); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| if (status) |
| goto get_veb_exit; |
| |
| if (switch_id) |
| *switch_id = le16_to_cpu(cmd_resp->switch_id); |
| if (statistic_index) |
| *statistic_index = le16_to_cpu(cmd_resp->statistic_index); |
| if (vebs_used) |
| *vebs_used = le16_to_cpu(cmd_resp->vebs_used); |
| if (vebs_free) |
| *vebs_free = le16_to_cpu(cmd_resp->vebs_free); |
| if (floating) { |
| u16 flags = le16_to_cpu(cmd_resp->veb_flags); |
| if (flags & I40E_AQC_ADD_VEB_FLOATING) |
| *floating = true; |
| else |
| *floating = false; |
| } |
| |
| get_veb_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_add_macvlan |
| * @hw: pointer to the hw struct |
| * @seid: VSI for the mac address |
| * @mv_list: list of macvlans to be added |
| * @count: length of the list |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Add MAC/VLAN addresses to the HW filtering |
| **/ |
| i40e_status i40e_aq_add_macvlan(struct i40e_hw *hw, u16 seid, |
| struct i40e_aqc_add_macvlan_element_data *mv_list, |
| u16 count, struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_macvlan *cmd = |
| (struct i40e_aqc_macvlan *)&desc.params.raw; |
| i40e_status status; |
| u16 buf_size; |
| |
| if (count == 0 || !mv_list || !hw) |
| return I40E_ERR_PARAM; |
| |
| buf_size = count * sizeof(struct i40e_aqc_add_macvlan_element_data); |
| |
| /* prep the rest of the request */ |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_add_macvlan); |
| cmd->num_addresses = cpu_to_le16(count); |
| cmd->seid[0] = cpu_to_le16(I40E_AQC_MACVLAN_CMD_SEID_VALID | seid); |
| cmd->seid[1] = 0; |
| cmd->seid[2] = 0; |
| |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| if (buf_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, mv_list, buf_size, |
| cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_remove_macvlan |
| * @hw: pointer to the hw struct |
| * @seid: VSI for the mac address |
| * @mv_list: list of macvlans to be removed |
| * @count: length of the list |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Remove MAC/VLAN addresses from the HW filtering |
| **/ |
| i40e_status i40e_aq_remove_macvlan(struct i40e_hw *hw, u16 seid, |
| struct i40e_aqc_remove_macvlan_element_data *mv_list, |
| u16 count, struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_macvlan *cmd = |
| (struct i40e_aqc_macvlan *)&desc.params.raw; |
| i40e_status status; |
| u16 buf_size; |
| |
| if (count == 0 || !mv_list || !hw) |
| return I40E_ERR_PARAM; |
| |
| buf_size = count * sizeof(struct i40e_aqc_remove_macvlan_element_data); |
| |
| /* prep the rest of the request */ |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_remove_macvlan); |
| cmd->num_addresses = cpu_to_le16(count); |
| cmd->seid[0] = cpu_to_le16(I40E_AQC_MACVLAN_CMD_SEID_VALID | seid); |
| cmd->seid[1] = 0; |
| cmd->seid[2] = 0; |
| |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| if (buf_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, mv_list, buf_size, |
| cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_send_msg_to_vf |
| * @hw: pointer to the hardware structure |
| * @vfid: vf id to send msg |
| * @v_opcode: opcodes for VF-PF communication |
| * @v_retval: return error code |
| * @msg: pointer to the msg buffer |
| * @msglen: msg length |
| * @cmd_details: pointer to command details |
| * |
| * send msg to vf |
| **/ |
| i40e_status i40e_aq_send_msg_to_vf(struct i40e_hw *hw, u16 vfid, |
| u32 v_opcode, u32 v_retval, u8 *msg, u16 msglen, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_pf_vf_message *cmd = |
| (struct i40e_aqc_pf_vf_message *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_send_msg_to_vf); |
| cmd->id = cpu_to_le32(vfid); |
| desc.cookie_high = cpu_to_le32(v_opcode); |
| desc.cookie_low = cpu_to_le32(v_retval); |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_SI); |
| if (msglen) { |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | |
| I40E_AQ_FLAG_RD)); |
| if (msglen > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| desc.datalen = cpu_to_le16(msglen); |
| } |
| status = i40e_asq_send_command(hw, &desc, msg, msglen, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_hmc_resource_profile |
| * @hw: pointer to the hw struct |
| * @profile: type of profile the HMC is to be set as |
| * @pe_vf_enabled_count: the number of PE enabled VFs the system has |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * set the HMC profile of the device. |
| **/ |
| i40e_status i40e_aq_set_hmc_resource_profile(struct i40e_hw *hw, |
| enum i40e_aq_hmc_profile profile, |
| u8 pe_vf_enabled_count, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aq_get_set_hmc_resource_profile *cmd = |
| (struct i40e_aq_get_set_hmc_resource_profile *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_hmc_resource_profile); |
| |
| cmd->pm_profile = (u8)profile; |
| cmd->pe_vf_enabled = pe_vf_enabled_count; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_request_resource |
| * @hw: pointer to the hw struct |
| * @resource: resource id |
| * @access: access type |
| * @sdp_number: resource number |
| * @timeout: the maximum time in ms that the driver may hold the resource |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * requests common resource using the admin queue commands |
| **/ |
| i40e_status i40e_aq_request_resource(struct i40e_hw *hw, |
| enum i40e_aq_resources_ids resource, |
| enum i40e_aq_resource_access_type access, |
| u8 sdp_number, u64 *timeout, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_request_resource *cmd_resp = |
| (struct i40e_aqc_request_resource *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_request_resource); |
| |
| cmd_resp->resource_id = cpu_to_le16(resource); |
| cmd_resp->access_type = cpu_to_le16(access); |
| cmd_resp->resource_number = cpu_to_le32(sdp_number); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| /* The completion specifies the maximum time in ms that the driver |
| * may hold the resource in the Timeout field. |
| * If the resource is held by someone else, the command completes with |
| * busy return value and the timeout field indicates the maximum time |
| * the current owner of the resource has to free it. |
| */ |
| if (!status || hw->aq.asq_last_status == I40E_AQ_RC_EBUSY) |
| *timeout = le32_to_cpu(cmd_resp->timeout); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_release_resource |
| * @hw: pointer to the hw struct |
| * @resource: resource id |
| * @sdp_number: resource number |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * release common resource using the admin queue commands |
| **/ |
| i40e_status i40e_aq_release_resource(struct i40e_hw *hw, |
| enum i40e_aq_resources_ids resource, |
| u8 sdp_number, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_request_resource *cmd = |
| (struct i40e_aqc_request_resource *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_release_resource); |
| |
| cmd->resource_id = cpu_to_le16(resource); |
| cmd->resource_number = cpu_to_le32(sdp_number); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_read_nvm |
| * @hw: pointer to the hw struct |
| * @module_pointer: module pointer location in words from the NVM beginning |
| * @offset: byte offset from the module beginning |
| * @length: length of the section to be read (in bytes from the offset) |
| * @data: command buffer (size [bytes] = length) |
| * @last_command: tells if this is the last command in a series |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Read the NVM using the admin queue commands |
| **/ |
| i40e_status i40e_aq_read_nvm(struct i40e_hw *hw, u8 module_pointer, |
| u32 offset, u16 length, void *data, |
| bool last_command, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_nvm_update *cmd = |
| (struct i40e_aqc_nvm_update *)&desc.params.raw; |
| i40e_status status; |
| |
| /* In offset the highest byte must be zeroed. */ |
| if (offset & 0xFF000000) { |
| status = I40E_ERR_PARAM; |
| goto i40e_aq_read_nvm_exit; |
| } |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_nvm_read); |
| |
| /* If this is the last command in a series, set the proper flag. */ |
| if (last_command) |
| cmd->command_flags |= I40E_AQ_NVM_LAST_CMD; |
| cmd->module_pointer = module_pointer; |
| cmd->offset = cpu_to_le32(offset); |
| cmd->length = cpu_to_le16(length); |
| |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (length > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, data, length, cmd_details); |
| |
| i40e_aq_read_nvm_exit: |
| return status; |
| } |
| |
| #define I40E_DEV_FUNC_CAP_SWITCH_MODE 0x01 |
| #define I40E_DEV_FUNC_CAP_MGMT_MODE 0x02 |
| #define I40E_DEV_FUNC_CAP_NPAR 0x03 |
| #define I40E_DEV_FUNC_CAP_OS2BMC 0x04 |
| #define I40E_DEV_FUNC_CAP_VALID_FUNC 0x05 |
| #define I40E_DEV_FUNC_CAP_SRIOV_1_1 0x12 |
| #define I40E_DEV_FUNC_CAP_VF 0x13 |
| #define I40E_DEV_FUNC_CAP_VMDQ 0x14 |
| #define I40E_DEV_FUNC_CAP_802_1_QBG 0x15 |
| #define I40E_DEV_FUNC_CAP_802_1_QBH 0x16 |
| #define I40E_DEV_FUNC_CAP_VSI 0x17 |
| #define I40E_DEV_FUNC_CAP_DCB 0x18 |
| #define I40E_DEV_FUNC_CAP_FCOE 0x21 |
| #define I40E_DEV_FUNC_CAP_RSS 0x40 |
| #define I40E_DEV_FUNC_CAP_RX_QUEUES 0x41 |
| #define I40E_DEV_FUNC_CAP_TX_QUEUES 0x42 |
| #define I40E_DEV_FUNC_CAP_MSIX 0x43 |
| #define I40E_DEV_FUNC_CAP_MSIX_VF 0x44 |
| #define I40E_DEV_FUNC_CAP_FLOW_DIRECTOR 0x45 |
| #define I40E_DEV_FUNC_CAP_IEEE_1588 0x46 |
| #define I40E_DEV_FUNC_CAP_MFP_MODE_1 0xF1 |
| #define I40E_DEV_FUNC_CAP_CEM 0xF2 |
| #define I40E_DEV_FUNC_CAP_IWARP 0x51 |
| #define I40E_DEV_FUNC_CAP_LED 0x61 |
| #define I40E_DEV_FUNC_CAP_SDP 0x62 |
| #define I40E_DEV_FUNC_CAP_MDIO 0x63 |
| |
| /** |
| * i40e_parse_discover_capabilities |
| * @hw: pointer to the hw struct |
| * @buff: pointer to a buffer containing device/function capability records |
| * @cap_count: number of capability records in the list |
| * @list_type_opc: type of capabilities list to parse |
| * |
| * Parse the device/function capabilities list. |
| **/ |
| static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff, |
| u32 cap_count, |
| enum i40e_admin_queue_opc list_type_opc) |
| { |
| struct i40e_aqc_list_capabilities_element_resp *cap; |
| u32 number, logical_id, phys_id; |
| struct i40e_hw_capabilities *p; |
| u32 reg_val; |
| u32 i = 0; |
| u16 id; |
| |
| cap = (struct i40e_aqc_list_capabilities_element_resp *) buff; |
| |
| if (list_type_opc == i40e_aqc_opc_list_dev_capabilities) |
| p = (struct i40e_hw_capabilities *)&hw->dev_caps; |
| else if (list_type_opc == i40e_aqc_opc_list_func_capabilities) |
| p = (struct i40e_hw_capabilities *)&hw->func_caps; |
| else |
| return; |
| |
| for (i = 0; i < cap_count; i++, cap++) { |
| id = le16_to_cpu(cap->id); |
| number = le32_to_cpu(cap->number); |
| logical_id = le32_to_cpu(cap->logical_id); |
| phys_id = le32_to_cpu(cap->phys_id); |
| |
| switch (id) { |
| case I40E_DEV_FUNC_CAP_SWITCH_MODE: |
| p->switch_mode = number; |
| break; |
| case I40E_DEV_FUNC_CAP_MGMT_MODE: |
| p->management_mode = number; |
| break; |
| case I40E_DEV_FUNC_CAP_NPAR: |
| p->npar_enable = number; |
| break; |
| case I40E_DEV_FUNC_CAP_OS2BMC: |
| p->os2bmc = number; |
| break; |
| case I40E_DEV_FUNC_CAP_VALID_FUNC: |
| p->valid_functions = number; |
| break; |
| case I40E_DEV_FUNC_CAP_SRIOV_1_1: |
| if (number == 1) |
| p->sr_iov_1_1 = true; |
| break; |
| case I40E_DEV_FUNC_CAP_VF: |
| p->num_vfs = number; |
| p->vf_base_id = logical_id; |
| break; |
| case I40E_DEV_FUNC_CAP_VMDQ: |
| if (number == 1) |
| p->vmdq = true; |
| break; |
| case I40E_DEV_FUNC_CAP_802_1_QBG: |
| if (number == 1) |
| p->evb_802_1_qbg = true; |
| break; |
| case I40E_DEV_FUNC_CAP_802_1_QBH: |
| if (number == 1) |
| p->evb_802_1_qbh = true; |
| break; |
| case I40E_DEV_FUNC_CAP_VSI: |
| p->num_vsis = number; |
| break; |
| case I40E_DEV_FUNC_CAP_DCB: |
| if (number == 1) { |
| p->dcb = true; |
| p->enabled_tcmap = logical_id; |
| p->maxtc = phys_id; |
| } |
| break; |
| case I40E_DEV_FUNC_CAP_FCOE: |
| if (number == 1) |
| p->fcoe = true; |
| break; |
| case I40E_DEV_FUNC_CAP_RSS: |
| p->rss = true; |
| reg_val = rd32(hw, I40E_PFQF_CTL_0); |
| if (reg_val & I40E_PFQF_CTL_0_HASHLUTSIZE_MASK) |
| p->rss_table_size = number; |
| else |
| p->rss_table_size = 128; |
| p->rss_table_entry_width = logical_id; |
| break; |
| case I40E_DEV_FUNC_CAP_RX_QUEUES: |
| p->num_rx_qp = number; |
| p->base_queue = phys_id; |
| break; |
| case I40E_DEV_FUNC_CAP_TX_QUEUES: |
| p->num_tx_qp = number; |
| p->base_queue = phys_id; |
| break; |
| case I40E_DEV_FUNC_CAP_MSIX: |
| p->num_msix_vectors = number; |
| break; |
| case I40E_DEV_FUNC_CAP_MSIX_VF: |
| p->num_msix_vectors_vf = number; |
| break; |
| case I40E_DEV_FUNC_CAP_MFP_MODE_1: |
| if (number == 1) |
| p->mfp_mode_1 = true; |
| break; |
| case I40E_DEV_FUNC_CAP_CEM: |
| if (number == 1) |
| p->mgmt_cem = true; |
| break; |
| case I40E_DEV_FUNC_CAP_IWARP: |
| if (number == 1) |
| p->iwarp = true; |
| break; |
| case I40E_DEV_FUNC_CAP_LED: |
| if (phys_id < I40E_HW_CAP_MAX_GPIO) |
| p->led[phys_id] = true; |
| break; |
| case I40E_DEV_FUNC_CAP_SDP: |
| if (phys_id < I40E_HW_CAP_MAX_GPIO) |
| p->sdp[phys_id] = true; |
| break; |
| case I40E_DEV_FUNC_CAP_MDIO: |
| if (number == 1) { |
| p->mdio_port_num = phys_id; |
| p->mdio_port_mode = logical_id; |
| } |
| break; |
| case I40E_DEV_FUNC_CAP_IEEE_1588: |
| if (number == 1) |
| p->ieee_1588 = true; |
| break; |
| case I40E_DEV_FUNC_CAP_FLOW_DIRECTOR: |
| p->fd = true; |
| p->fd_filters_guaranteed = number; |
| p->fd_filters_best_effort = logical_id; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* additional HW specific goodies that might |
| * someday be HW version specific |
| */ |
| p->rx_buf_chain_len = I40E_MAX_CHAINED_RX_BUFFERS; |
| } |
| |
| /** |
| * i40e_aq_discover_capabilities |
| * @hw: pointer to the hw struct |
| * @buff: a virtual buffer to hold the capabilities |
| * @buff_size: Size of the virtual buffer |
| * @data_size: Size of the returned data, or buff size needed if AQ err==ENOMEM |
| * @list_type_opc: capabilities type to discover - pass in the command opcode |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Get the device capabilities descriptions from the firmware |
| **/ |
| i40e_status i40e_aq_discover_capabilities(struct i40e_hw *hw, |
| void *buff, u16 buff_size, u16 *data_size, |
| enum i40e_admin_queue_opc list_type_opc, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aqc_list_capabilites *cmd; |
| struct i40e_aq_desc desc; |
| i40e_status status = 0; |
| |
| cmd = (struct i40e_aqc_list_capabilites *)&desc.params.raw; |
| |
| if (list_type_opc != i40e_aqc_opc_list_func_capabilities && |
| list_type_opc != i40e_aqc_opc_list_dev_capabilities) { |
| status = I40E_ERR_PARAM; |
| goto exit; |
| } |
| |
| i40e_fill_default_direct_cmd_desc(&desc, list_type_opc); |
| |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (buff_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, buff, buff_size, cmd_details); |
| *data_size = le16_to_cpu(desc.datalen); |
| |
| if (status) |
| goto exit; |
| |
| i40e_parse_discover_capabilities(hw, buff, le32_to_cpu(cmd->count), |
| list_type_opc); |
| |
| exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_lldp_mib |
| * @hw: pointer to the hw struct |
| * @bridge_type: type of bridge requested |
| * @mib_type: Local, Remote or both Local and Remote MIBs |
| * @buff: pointer to a user supplied buffer to store the MIB block |
| * @buff_size: size of the buffer (in bytes) |
| * @local_len : length of the returned Local LLDP MIB |
| * @remote_len: length of the returned Remote LLDP MIB |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Requests the complete LLDP MIB (entire packet). |
| **/ |
| i40e_status i40e_aq_get_lldp_mib(struct i40e_hw *hw, u8 bridge_type, |
| u8 mib_type, void *buff, u16 buff_size, |
| u16 *local_len, u16 *remote_len, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_lldp_get_mib *cmd = |
| (struct i40e_aqc_lldp_get_mib *)&desc.params.raw; |
| struct i40e_aqc_lldp_get_mib *resp = |
| (struct i40e_aqc_lldp_get_mib *)&desc.params.raw; |
| i40e_status status; |
| |
| if (buff_size == 0 || !buff) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_lldp_get_mib); |
| /* Indirect Command */ |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| |
| cmd->type = mib_type & I40E_AQ_LLDP_MIB_TYPE_MASK; |
| cmd->type |= ((bridge_type << I40E_AQ_LLDP_BRIDGE_TYPE_SHIFT) & |
| I40E_AQ_LLDP_BRIDGE_TYPE_MASK); |
| |
| desc.datalen = cpu_to_le16(buff_size); |
| |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (buff_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, buff, buff_size, cmd_details); |
| if (!status) { |
| if (local_len != NULL) |
| *local_len = le16_to_cpu(resp->local_len); |
| if (remote_len != NULL) |
| *remote_len = le16_to_cpu(resp->remote_len); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_cfg_lldp_mib_change_event |
| * @hw: pointer to the hw struct |
| * @enable_update: Enable or Disable event posting |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Enable or Disable posting of an event on ARQ when LLDP MIB |
| * associated with the interface changes |
| **/ |
| i40e_status i40e_aq_cfg_lldp_mib_change_event(struct i40e_hw *hw, |
| bool enable_update, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_lldp_update_mib *cmd = |
| (struct i40e_aqc_lldp_update_mib *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_lldp_update_mib); |
| |
| if (!enable_update) |
| cmd->command |= I40E_AQ_LLDP_MIB_UPDATE_DISABLE; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_stop_lldp |
| * @hw: pointer to the hw struct |
| * @shutdown_agent: True if LLDP Agent needs to be Shutdown |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Stop or Shutdown the embedded LLDP Agent |
| **/ |
| i40e_status i40e_aq_stop_lldp(struct i40e_hw *hw, bool shutdown_agent, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_lldp_stop *cmd = |
| (struct i40e_aqc_lldp_stop *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_lldp_stop); |
| |
| if (shutdown_agent) |
| cmd->command |= I40E_AQ_LLDP_AGENT_SHUTDOWN; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_start_lldp |
| * @hw: pointer to the hw struct |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Start the embedded LLDP Agent on all ports. |
| **/ |
| i40e_status i40e_aq_start_lldp(struct i40e_hw *hw, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_lldp_start *cmd = |
| (struct i40e_aqc_lldp_start *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_lldp_start); |
| |
| cmd->command = I40E_AQ_LLDP_AGENT_START; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_add_udp_tunnel |
| * @hw: pointer to the hw struct |
| * @udp_port: the UDP port to add |
| * @header_len: length of the tunneling header length in DWords |
| * @protocol_index: protocol index type |
| * @filter_index: pointer to filter index |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_add_udp_tunnel(struct i40e_hw *hw, |
| u16 udp_port, u8 header_len, |
| u8 protocol_index, u8 *filter_index, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_udp_tunnel *cmd = |
| (struct i40e_aqc_add_udp_tunnel *)&desc.params.raw; |
| struct i40e_aqc_del_udp_tunnel_completion *resp = |
| (struct i40e_aqc_del_udp_tunnel_completion *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_add_udp_tunnel); |
| |
| cmd->udp_port = cpu_to_le16(udp_port); |
| cmd->protocol_type = protocol_index; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (!status) |
| *filter_index = resp->index; |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_del_udp_tunnel |
| * @hw: pointer to the hw struct |
| * @index: filter index |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_del_udp_tunnel(struct i40e_hw *hw, u8 index, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_remove_udp_tunnel *cmd = |
| (struct i40e_aqc_remove_udp_tunnel *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_del_udp_tunnel); |
| |
| cmd->index = index; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_delete_element - Delete switch element |
| * @hw: pointer to the hw struct |
| * @seid: the SEID to delete from the switch |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * This deletes a switch element from the switch. |
| **/ |
| i40e_status i40e_aq_delete_element(struct i40e_hw *hw, u16 seid, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_switch_seid *cmd = |
| (struct i40e_aqc_switch_seid *)&desc.params.raw; |
| i40e_status status; |
| |
| if (seid == 0) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_delete_element); |
| |
| cmd->seid = cpu_to_le16(seid); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_dcb_updated - DCB Updated Command |
| * @hw: pointer to the hw struct |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * EMP will return when the shared RPB settings have been |
| * recomputed and modified. The retval field in the descriptor |
| * will be set to 0 when RPB is modified. |
| **/ |
| i40e_status i40e_aq_dcb_updated(struct i40e_hw *hw, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_dcb_updated); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_tx_sched_cmd - generic Tx scheduler AQ command handler |
| * @hw: pointer to the hw struct |
| * @seid: seid for the physical port/switching component/vsi |
| * @buff: Indirect buffer to hold data parameters and response |
| * @buff_size: Indirect buffer size |
| * @opcode: Tx scheduler AQ command opcode |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Generic command handler for Tx scheduler AQ commands |
| **/ |
| static i40e_status i40e_aq_tx_sched_cmd(struct i40e_hw *hw, u16 seid, |
| void *buff, u16 buff_size, |
| enum i40e_admin_queue_opc opcode, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_tx_sched_ind *cmd = |
| (struct i40e_aqc_tx_sched_ind *)&desc.params.raw; |
| i40e_status status; |
| bool cmd_param_flag = false; |
| |
| switch (opcode) { |
| case i40e_aqc_opc_configure_vsi_ets_sla_bw_limit: |
| case i40e_aqc_opc_configure_vsi_tc_bw: |
| case i40e_aqc_opc_enable_switching_comp_ets: |
| case i40e_aqc_opc_modify_switching_comp_ets: |
| case i40e_aqc_opc_disable_switching_comp_ets: |
| case i40e_aqc_opc_configure_switching_comp_ets_bw_limit: |
| case i40e_aqc_opc_configure_switching_comp_bw_config: |
| cmd_param_flag = true; |
| break; |
| case i40e_aqc_opc_query_vsi_bw_config: |
| case i40e_aqc_opc_query_vsi_ets_sla_config: |
| case i40e_aqc_opc_query_switching_comp_ets_config: |
| case i40e_aqc_opc_query_port_ets_config: |
| case i40e_aqc_opc_query_switching_comp_bw_config: |
| cmd_param_flag = false; |
| break; |
| default: |
| return I40E_ERR_PARAM; |
| } |
| |
| i40e_fill_default_direct_cmd_desc(&desc, opcode); |
| |
| /* Indirect command */ |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (cmd_param_flag) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_RD); |
| if (buff_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| desc.datalen = cpu_to_le16(buff_size); |
| |
| cmd->vsi_seid = cpu_to_le16(seid); |
| |
| status = i40e_asq_send_command(hw, &desc, buff, buff_size, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_config_vsi_tc_bw - Config VSI BW Allocation per TC |
| * @hw: pointer to the hw struct |
| * @seid: VSI seid |
| * @bw_data: Buffer holding enabled TCs, relative TC BW limit/credits |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_config_vsi_tc_bw(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_configure_vsi_tc_bw_data *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_configure_vsi_tc_bw, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_config_switch_comp_ets - Enable/Disable/Modify ETS on the port |
| * @hw: pointer to the hw struct |
| * @seid: seid of the switching component connected to Physical Port |
| * @ets_data: Buffer holding ETS parameters |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_config_switch_comp_ets(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_configure_switching_comp_ets_data *ets_data, |
| enum i40e_admin_queue_opc opcode, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)ets_data, |
| sizeof(*ets_data), opcode, cmd_details); |
| } |
| |
| /** |
| * i40e_aq_config_switch_comp_bw_config - Config Switch comp BW Alloc per TC |
| * @hw: pointer to the hw struct |
| * @seid: seid of the switching component |
| * @bw_data: Buffer holding enabled TCs, relative/absolute TC BW limit/credits |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_config_switch_comp_bw_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_configure_switching_comp_bw_config_data *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_configure_switching_comp_bw_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_query_vsi_bw_config - Query VSI BW configuration |
| * @hw: pointer to the hw struct |
| * @seid: seid of the VSI |
| * @bw_data: Buffer to hold VSI BW configuration |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_query_vsi_bw_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_query_vsi_bw_config_resp *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_query_vsi_bw_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_query_vsi_ets_sla_config - Query VSI BW configuration per TC |
| * @hw: pointer to the hw struct |
| * @seid: seid of the VSI |
| * @bw_data: Buffer to hold VSI BW configuration per TC |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_query_vsi_ets_sla_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_query_vsi_ets_sla_config_resp *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_query_vsi_ets_sla_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_query_switch_comp_ets_config - Query Switch comp BW config per TC |
| * @hw: pointer to the hw struct |
| * @seid: seid of the switching component |
| * @bw_data: Buffer to hold switching component's per TC BW config |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_query_switch_comp_ets_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_query_switching_comp_ets_config_resp *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_query_switching_comp_ets_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_query_port_ets_config - Query Physical Port ETS configuration |
| * @hw: pointer to the hw struct |
| * @seid: seid of the VSI or switching component connected to Physical Port |
| * @bw_data: Buffer to hold current ETS configuration for the Physical Port |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_query_port_ets_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_query_port_ets_config_resp *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_query_port_ets_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_query_switch_comp_bw_config - Query Switch comp BW configuration |
| * @hw: pointer to the hw struct |
| * @seid: seid of the switching component |
| * @bw_data: Buffer to hold switching component's BW configuration |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_query_switch_comp_bw_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_query_switching_comp_bw_config_resp *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_query_switching_comp_bw_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_validate_filter_settings |
| * @hw: pointer to the hardware structure |
| * @settings: Filter control settings |
| * |
| * Check and validate the filter control settings passed. |
| * The function checks for the valid filter/context sizes being |
| * passed for FCoE and PE. |
| * |
| * Returns 0 if the values passed are valid and within |
| * range else returns an error. |
| **/ |
| static i40e_status i40e_validate_filter_settings(struct i40e_hw *hw, |
| struct i40e_filter_control_settings *settings) |
| { |
| u32 fcoe_cntx_size, fcoe_filt_size; |
| u32 pe_cntx_size, pe_filt_size; |
| u32 fcoe_fmax, pe_fmax; |
| u32 val; |
| |
| /* Validate FCoE settings passed */ |
| switch (settings->fcoe_filt_num) { |
| case I40E_HASH_FILTER_SIZE_1K: |
| case I40E_HASH_FILTER_SIZE_2K: |
| case I40E_HASH_FILTER_SIZE_4K: |
| case I40E_HASH_FILTER_SIZE_8K: |
| case I40E_HASH_FILTER_SIZE_16K: |
| case I40E_HASH_FILTER_SIZE_32K: |
| fcoe_filt_size = I40E_HASH_FILTER_BASE_SIZE; |
| fcoe_filt_size <<= (u32)settings->fcoe_filt_num; |
| break; |
| default: |
| return I40E_ERR_PARAM; |
| } |
| |
| switch (settings->fcoe_cntx_num) { |
| case I40E_DMA_CNTX_SIZE_512: |
| case I40E_DMA_CNTX_SIZE_1K: |
| case I40E_DMA_CNTX_SIZE_2K: |
| case I40E_DMA_CNTX_SIZE_4K: |
| fcoe_cntx_size = I40E_DMA_CNTX_BASE_SIZE; |
| fcoe_cntx_size <<= (u32)settings->fcoe_cntx_num; |
| break; |
| default: |
| return I40E_ERR_PARAM; |
| } |
| |
| /* Validate PE settings passed */ |
| switch (settings->pe_filt_num) { |
| case I40E_HASH_FILTER_SIZE_1K: |
| case I40E_HASH_FILTER_SIZE_2K: |
| case I40E_HASH_FILTER_SIZE_4K: |
| case I40E_HASH_FILTER_SIZE_8K: |
| case I40E_HASH_FILTER_SIZE_16K: |
| case I40E_HASH_FILTER_SIZE_32K: |
| case I40E_HASH_FILTER_SIZE_64K: |
| case I40E_HASH_FILTER_SIZE_128K: |
| case I40E_HASH_FILTER_SIZE_256K: |
| case I40E_HASH_FILTER_SIZE_512K: |
| case I40E_HASH_FILTER_SIZE_1M: |
| pe_filt_size = I40E_HASH_FILTER_BASE_SIZE; |
| pe_filt_size <<= (u32)settings->pe_filt_num; |
| break; |
| default: |
| return I40E_ERR_PARAM; |
| } |
| |
| switch (settings->pe_cntx_num) { |
| case I40E_DMA_CNTX_SIZE_512: |
| case I40E_DMA_CNTX_SIZE_1K: |
| case I40E_DMA_CNTX_SIZE_2K: |
| case I40E_DMA_CNTX_SIZE_4K: |
| case I40E_DMA_CNTX_SIZE_8K: |
| case I40E_DMA_CNTX_SIZE_16K: |
| case I40E_DMA_CNTX_SIZE_32K: |
| case I40E_DMA_CNTX_SIZE_64K: |
| case I40E_DMA_CNTX_SIZE_128K: |
| case I40E_DMA_CNTX_SIZE_256K: |
| pe_cntx_size = I40E_DMA_CNTX_BASE_SIZE; |
| pe_cntx_size <<= (u32)settings->pe_cntx_num; |
| break; |
| default: |
| return I40E_ERR_PARAM; |
| } |
| |
| /* FCHSIZE + FCDSIZE should not be greater than PMFCOEFMAX */ |
| val = rd32(hw, I40E_GLHMC_FCOEFMAX); |
| fcoe_fmax = (val & I40E_GLHMC_FCOEFMAX_PMFCOEFMAX_MASK) |
| >> I40E_GLHMC_FCOEFMAX_PMFCOEFMAX_SHIFT; |
| if (fcoe_filt_size + fcoe_cntx_size > fcoe_fmax) |
| return I40E_ERR_INVALID_SIZE; |
| |
| /* PEHSIZE + PEDSIZE should not be greater than PMPEXFMAX */ |
| val = rd32(hw, I40E_GLHMC_PEXFMAX); |
| pe_fmax = (val & I40E_GLHMC_PEXFMAX_PMPEXFMAX_MASK) |
| >> I40E_GLHMC_PEXFMAX_PMPEXFMAX_SHIFT; |
| if (pe_filt_size + pe_cntx_size > pe_fmax) |
| return I40E_ERR_INVALID_SIZE; |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_set_filter_control |
| * @hw: pointer to the hardware structure |
| * @settings: Filter control settings |
| * |
| * Set the Queue Filters for PE/FCoE and enable filters required |
| * for a single PF. It is expected that these settings are programmed |
| * at the driver initialization time. |
| **/ |
| i40e_status i40e_set_filter_control(struct i40e_hw *hw, |
| struct i40e_filter_control_settings *settings) |
| { |
| i40e_status ret = 0; |
| u32 hash_lut_size = 0; |
| u32 val; |
| |
| if (!settings) |
| return I40E_ERR_PARAM; |
| |
| /* Validate the input settings */ |
| ret = i40e_validate_filter_settings(hw, settings); |
| if (ret) |
| return ret; |
| |
| /* Read the PF Queue Filter control register */ |
| val = rd32(hw, I40E_PFQF_CTL_0); |
| |
| /* Program required PE hash buckets for the PF */ |
| val &= ~I40E_PFQF_CTL_0_PEHSIZE_MASK; |
| val |= ((u32)settings->pe_filt_num << I40E_PFQF_CTL_0_PEHSIZE_SHIFT) & |
| I40E_PFQF_CTL_0_PEHSIZE_MASK; |
| /* Program required PE contexts for the PF */ |
| val &= ~I40E_PFQF_CTL_0_PEDSIZE_MASK; |
| val |= ((u32)settings->pe_cntx_num << I40E_PFQF_CTL_0_PEDSIZE_SHIFT) & |
| I40E_PFQF_CTL_0_PEDSIZE_MASK; |
| |
| /* Program required FCoE hash buckets for the PF */ |
| val &= ~I40E_PFQF_CTL_0_PFFCHSIZE_MASK; |
| val |= ((u32)settings->fcoe_filt_num << |
| I40E_PFQF_CTL_0_PFFCHSIZE_SHIFT) & |
| I40E_PFQF_CTL_0_PFFCHSIZE_MASK; |
| /* Program required FCoE DDP contexts for the PF */ |
| val &= ~I40E_PFQF_CTL_0_PFFCDSIZE_MASK; |
| val |= ((u32)settings->fcoe_cntx_num << |
| I40E_PFQF_CTL_0_PFFCDSIZE_SHIFT) & |
| I40E_PFQF_CTL_0_PFFCDSIZE_MASK; |
| |
| /* Program Hash LUT size for the PF */ |
| val &= ~I40E_PFQF_CTL_0_HASHLUTSIZE_MASK; |
| if (settings->hash_lut_size == I40E_HASH_LUT_SIZE_512) |
| hash_lut_size = 1; |
| val |= (hash_lut_size << I40E_PFQF_CTL_0_HASHLUTSIZE_SHIFT) & |
| I40E_PFQF_CTL_0_HASHLUTSIZE_MASK; |
| |
| /* Enable FDIR, Ethertype and MACVLAN filters for PF and VFs */ |
| if (settings->enable_fdir) |
| val |= I40E_PFQF_CTL_0_FD_ENA_MASK; |
| if (settings->enable_ethtype) |
| val |= I40E_PFQF_CTL_0_ETYPE_ENA_MASK; |
| if (settings->enable_macvlan) |
| val |= I40E_PFQF_CTL_0_MACVLAN_ENA_MASK; |
| |
| wr32(hw, I40E_PFQF_CTL_0, val); |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_aq_add_rem_control_packet_filter - Add or Remove Control Packet Filter |
| * @hw: pointer to the hw struct |
| * @mac_addr: MAC address to use in the filter |
| * @ethtype: Ethertype to use in the filter |
| * @flags: Flags that needs to be applied to the filter |
| * @vsi_seid: seid of the control VSI |
| * @queue: VSI queue number to send the packet to |
| * @is_add: Add control packet filter if True else remove |
| * @stats: Structure to hold information on control filter counts |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * This command will Add or Remove control packet filter for a control VSI. |
| * In return it will update the total number of perfect filter count in |
| * the stats member. |
| **/ |
| i40e_status i40e_aq_add_rem_control_packet_filter(struct i40e_hw *hw, |
| u8 *mac_addr, u16 ethtype, u16 flags, |
| u16 vsi_seid, u16 queue, bool is_add, |
| struct i40e_control_filter_stats *stats, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_remove_control_packet_filter *cmd = |
| (struct i40e_aqc_add_remove_control_packet_filter *) |
| &desc.params.raw; |
| struct i40e_aqc_add_remove_control_packet_filter_completion *resp = |
| (struct i40e_aqc_add_remove_control_packet_filter_completion *) |
| &desc.params.raw; |
| i40e_status status; |
| |
| if (vsi_seid == 0) |
| return I40E_ERR_PARAM; |
| |
| if (is_add) { |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_add_control_packet_filter); |
| cmd->queue = cpu_to_le16(queue); |
| } else { |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_remove_control_packet_filter); |
| } |
| |
| if (mac_addr) |
| memcpy(cmd->mac, mac_addr, ETH_ALEN); |
| |
| cmd->etype = cpu_to_le16(ethtype); |
| cmd->flags = cpu_to_le16(flags); |
| cmd->seid = cpu_to_le16(vsi_seid); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (!status && stats) { |
| stats->mac_etype_used = le16_to_cpu(resp->mac_etype_used); |
| stats->etype_used = le16_to_cpu(resp->etype_used); |
| stats->mac_etype_free = le16_to_cpu(resp->mac_etype_free); |
| stats->etype_free = le16_to_cpu(resp->etype_free); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_set_pci_config_data - store PCI bus info |
| * @hw: pointer to hardware structure |
| * @link_status: the link status word from PCI config space |
| * |
| * Stores the PCI bus info (speed, width, type) within the i40e_hw structure |
| **/ |
| void i40e_set_pci_config_data(struct i40e_hw *hw, u16 link_status) |
| { |
| hw->bus.type = i40e_bus_type_pci_express; |
| |
| switch (link_status & PCI_EXP_LNKSTA_NLW) { |
| case PCI_EXP_LNKSTA_NLW_X1: |
| hw->bus.width = i40e_bus_width_pcie_x1; |
| break; |
| case PCI_EXP_LNKSTA_NLW_X2: |
| hw->bus.width = i40e_bus_width_pcie_x2; |
| break; |
| case PCI_EXP_LNKSTA_NLW_X4: |
| hw->bus.width = i40e_bus_width_pcie_x4; |
| break; |
| case PCI_EXP_LNKSTA_NLW_X8: |
| hw->bus.width = i40e_bus_width_pcie_x8; |
| break; |
| default: |
| hw->bus.width = i40e_bus_width_unknown; |
| break; |
| } |
| |
| switch (link_status & PCI_EXP_LNKSTA_CLS) { |
| case PCI_EXP_LNKSTA_CLS_2_5GB: |
| hw->bus.speed = i40e_bus_speed_2500; |
| break; |
| case PCI_EXP_LNKSTA_CLS_5_0GB: |
| hw->bus.speed = i40e_bus_speed_5000; |
| break; |
| case PCI_EXP_LNKSTA_CLS_8_0GB: |
| hw->bus.speed = i40e_bus_speed_8000; |
| break; |
| default: |
| hw->bus.speed = i40e_bus_speed_unknown; |
| break; |
| } |
| } |