| /* |
| * net/tipc/eth_media.c: Ethernet bearer support for TIPC |
| * |
| * Copyright (c) 2001-2007, Ericsson AB |
| * Copyright (c) 2005-2008, 2011, Wind River Systems |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "core.h" |
| #include "bearer.h" |
| |
| #define MAX_ETH_BEARERS MAX_BEARERS |
| |
| #define ETH_ADDR_OFFSET 4 /* message header offset of MAC address */ |
| |
| /** |
| * struct eth_bearer - Ethernet bearer data structure |
| * @bearer: ptr to associated "generic" bearer structure |
| * @dev: ptr to associated Ethernet network device |
| * @tipc_packet_type: used in binding TIPC to Ethernet driver |
| * @setup: work item used when enabling bearer |
| * @cleanup: work item used when disabling bearer |
| */ |
| struct eth_bearer { |
| struct tipc_bearer *bearer; |
| struct net_device *dev; |
| struct packet_type tipc_packet_type; |
| struct work_struct setup; |
| struct work_struct cleanup; |
| }; |
| |
| static struct tipc_media eth_media_info; |
| static struct eth_bearer eth_bearers[MAX_ETH_BEARERS]; |
| static int eth_started; |
| |
| static int recv_notification(struct notifier_block *nb, unsigned long evt, |
| void *dv); |
| /* |
| * Network device notifier info |
| */ |
| static struct notifier_block notifier = { |
| .notifier_call = recv_notification, |
| .priority = 0 |
| }; |
| |
| /** |
| * eth_media_addr_set - initialize Ethernet media address structure |
| * |
| * Media-dependent "value" field stores MAC address in first 6 bytes |
| * and zeroes out the remaining bytes. |
| */ |
| static void eth_media_addr_set(const struct tipc_bearer *tb_ptr, |
| struct tipc_media_addr *a, char *mac) |
| { |
| memcpy(a->value, mac, ETH_ALEN); |
| memset(a->value + ETH_ALEN, 0, sizeof(a->value) - ETH_ALEN); |
| a->media_id = TIPC_MEDIA_TYPE_ETH; |
| a->broadcast = !memcmp(mac, tb_ptr->bcast_addr.value, ETH_ALEN); |
| } |
| |
| /** |
| * send_msg - send a TIPC message out over an Ethernet interface |
| */ |
| static int send_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr, |
| struct tipc_media_addr *dest) |
| { |
| struct sk_buff *clone; |
| struct net_device *dev; |
| int delta; |
| |
| clone = skb_clone(buf, GFP_ATOMIC); |
| if (!clone) |
| return 0; |
| |
| dev = ((struct eth_bearer *)(tb_ptr->usr_handle))->dev; |
| delta = dev->hard_header_len - skb_headroom(buf); |
| |
| if ((delta > 0) && |
| pskb_expand_head(clone, SKB_DATA_ALIGN(delta), 0, GFP_ATOMIC)) { |
| kfree_skb(clone); |
| return 0; |
| } |
| |
| skb_reset_network_header(clone); |
| clone->dev = dev; |
| clone->protocol = htons(ETH_P_TIPC); |
| dev_hard_header(clone, dev, ETH_P_TIPC, dest->value, |
| dev->dev_addr, clone->len); |
| dev_queue_xmit(clone); |
| return 0; |
| } |
| |
| /** |
| * recv_msg - handle incoming TIPC message from an Ethernet interface |
| * |
| * Accept only packets explicitly sent to this node, or broadcast packets; |
| * ignores packets sent using Ethernet multicast, and traffic sent to other |
| * nodes (which can happen if interface is running in promiscuous mode). |
| */ |
| static int recv_msg(struct sk_buff *buf, struct net_device *dev, |
| struct packet_type *pt, struct net_device *orig_dev) |
| { |
| struct eth_bearer *eb_ptr = (struct eth_bearer *)pt->af_packet_priv; |
| |
| if (!net_eq(dev_net(dev), &init_net)) { |
| kfree_skb(buf); |
| return 0; |
| } |
| |
| if (likely(eb_ptr->bearer)) { |
| if (likely(buf->pkt_type <= PACKET_BROADCAST)) { |
| buf->next = NULL; |
| tipc_recv_msg(buf, eb_ptr->bearer); |
| return 0; |
| } |
| } |
| kfree_skb(buf); |
| return 0; |
| } |
| |
| /** |
| * setup_bearer - setup association between Ethernet bearer and interface |
| */ |
| static void setup_bearer(struct work_struct *work) |
| { |
| struct eth_bearer *eb_ptr = |
| container_of(work, struct eth_bearer, setup); |
| |
| dev_add_pack(&eb_ptr->tipc_packet_type); |
| } |
| |
| /** |
| * enable_bearer - attach TIPC bearer to an Ethernet interface |
| */ |
| static int enable_bearer(struct tipc_bearer *tb_ptr) |
| { |
| struct net_device *dev; |
| struct eth_bearer *eb_ptr = ð_bearers[0]; |
| struct eth_bearer *stop = ð_bearers[MAX_ETH_BEARERS]; |
| char *driver_name = strchr((const char *)tb_ptr->name, ':') + 1; |
| int pending_dev = 0; |
| |
| /* Find unused Ethernet bearer structure */ |
| while (eb_ptr->dev) { |
| if (!eb_ptr->bearer) |
| pending_dev++; |
| if (++eb_ptr == stop) |
| return pending_dev ? -EAGAIN : -EDQUOT; |
| } |
| |
| /* Find device with specified name */ |
| dev = dev_get_by_name(&init_net, driver_name); |
| if (!dev) |
| return -ENODEV; |
| |
| /* Create Ethernet bearer for device */ |
| eb_ptr->dev = dev; |
| eb_ptr->tipc_packet_type.type = htons(ETH_P_TIPC); |
| eb_ptr->tipc_packet_type.dev = dev; |
| eb_ptr->tipc_packet_type.func = recv_msg; |
| eb_ptr->tipc_packet_type.af_packet_priv = eb_ptr; |
| INIT_LIST_HEAD(&(eb_ptr->tipc_packet_type.list)); |
| INIT_WORK(&eb_ptr->setup, setup_bearer); |
| schedule_work(&eb_ptr->setup); |
| |
| /* Associate TIPC bearer with Ethernet bearer */ |
| eb_ptr->bearer = tb_ptr; |
| tb_ptr->usr_handle = (void *)eb_ptr; |
| memset(tb_ptr->bcast_addr.value, 0, sizeof(tb_ptr->bcast_addr.value)); |
| memcpy(tb_ptr->bcast_addr.value, dev->broadcast, ETH_ALEN); |
| tb_ptr->bcast_addr.media_id = TIPC_MEDIA_TYPE_ETH; |
| tb_ptr->bcast_addr.broadcast = 1; |
| tb_ptr->mtu = dev->mtu; |
| tb_ptr->blocked = 0; |
| eth_media_addr_set(tb_ptr, &tb_ptr->addr, (char *)dev->dev_addr); |
| return 0; |
| } |
| |
| /** |
| * cleanup_bearer - break association between Ethernet bearer and interface |
| * |
| * This routine must be invoked from a work queue because it can sleep. |
| */ |
| static void cleanup_bearer(struct work_struct *work) |
| { |
| struct eth_bearer *eb_ptr = |
| container_of(work, struct eth_bearer, cleanup); |
| |
| dev_remove_pack(&eb_ptr->tipc_packet_type); |
| dev_put(eb_ptr->dev); |
| eb_ptr->dev = NULL; |
| } |
| |
| /** |
| * disable_bearer - detach TIPC bearer from an Ethernet interface |
| * |
| * Mark Ethernet bearer as inactive so that incoming buffers are thrown away, |
| * then get worker thread to complete bearer cleanup. (Can't do cleanup |
| * here because cleanup code needs to sleep and caller holds spinlocks.) |
| */ |
| static void disable_bearer(struct tipc_bearer *tb_ptr) |
| { |
| struct eth_bearer *eb_ptr = (struct eth_bearer *)tb_ptr->usr_handle; |
| |
| eb_ptr->bearer = NULL; |
| INIT_WORK(&eb_ptr->cleanup, cleanup_bearer); |
| schedule_work(&eb_ptr->cleanup); |
| } |
| |
| /** |
| * recv_notification - handle device updates from OS |
| * |
| * Change the state of the Ethernet bearer (if any) associated with the |
| * specified device. |
| */ |
| static int recv_notification(struct notifier_block *nb, unsigned long evt, |
| void *ptr) |
| { |
| struct net_device *dev = netdev_notifier_info_to_dev(ptr); |
| struct eth_bearer *eb_ptr = ð_bearers[0]; |
| struct eth_bearer *stop = ð_bearers[MAX_ETH_BEARERS]; |
| |
| if (!net_eq(dev_net(dev), &init_net)) |
| return NOTIFY_DONE; |
| |
| while ((eb_ptr->dev != dev)) { |
| if (++eb_ptr == stop) |
| return NOTIFY_DONE; /* couldn't find device */ |
| } |
| if (!eb_ptr->bearer) |
| return NOTIFY_DONE; /* bearer had been disabled */ |
| |
| eb_ptr->bearer->mtu = dev->mtu; |
| |
| switch (evt) { |
| case NETDEV_CHANGE: |
| if (netif_carrier_ok(dev)) |
| tipc_continue(eb_ptr->bearer); |
| else |
| tipc_block_bearer(eb_ptr->bearer->name); |
| break; |
| case NETDEV_UP: |
| tipc_continue(eb_ptr->bearer); |
| break; |
| case NETDEV_DOWN: |
| tipc_block_bearer(eb_ptr->bearer->name); |
| break; |
| case NETDEV_CHANGEMTU: |
| case NETDEV_CHANGEADDR: |
| tipc_block_bearer(eb_ptr->bearer->name); |
| tipc_continue(eb_ptr->bearer); |
| break; |
| case NETDEV_UNREGISTER: |
| case NETDEV_CHANGENAME: |
| tipc_disable_bearer(eb_ptr->bearer->name); |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| |
| /** |
| * eth_addr2str - convert Ethernet address to string |
| */ |
| static int eth_addr2str(struct tipc_media_addr *a, char *str_buf, int str_size) |
| { |
| if (str_size < 18) /* 18 = strlen("aa:bb:cc:dd:ee:ff\0") */ |
| return 1; |
| |
| sprintf(str_buf, "%pM", a->value); |
| return 0; |
| } |
| |
| /** |
| * eth_str2addr - convert Ethernet address format to message header format |
| */ |
| static int eth_addr2msg(struct tipc_media_addr *a, char *msg_area) |
| { |
| memset(msg_area, 0, TIPC_MEDIA_ADDR_SIZE); |
| msg_area[TIPC_MEDIA_TYPE_OFFSET] = TIPC_MEDIA_TYPE_ETH; |
| memcpy(msg_area + ETH_ADDR_OFFSET, a->value, ETH_ALEN); |
| return 0; |
| } |
| |
| /** |
| * eth_str2addr - convert message header address format to Ethernet format |
| */ |
| static int eth_msg2addr(const struct tipc_bearer *tb_ptr, |
| struct tipc_media_addr *a, char *msg_area) |
| { |
| if (msg_area[TIPC_MEDIA_TYPE_OFFSET] != TIPC_MEDIA_TYPE_ETH) |
| return 1; |
| |
| eth_media_addr_set(tb_ptr, a, msg_area + ETH_ADDR_OFFSET); |
| return 0; |
| } |
| |
| /* |
| * Ethernet media registration info |
| */ |
| static struct tipc_media eth_media_info = { |
| .send_msg = send_msg, |
| .enable_bearer = enable_bearer, |
| .disable_bearer = disable_bearer, |
| .addr2str = eth_addr2str, |
| .addr2msg = eth_addr2msg, |
| .msg2addr = eth_msg2addr, |
| .priority = TIPC_DEF_LINK_PRI, |
| .tolerance = TIPC_DEF_LINK_TOL, |
| .window = TIPC_DEF_LINK_WIN, |
| .type_id = TIPC_MEDIA_TYPE_ETH, |
| .name = "eth" |
| }; |
| |
| /** |
| * tipc_eth_media_start - activate Ethernet bearer support |
| * |
| * Register Ethernet media type with TIPC bearer code. Also register |
| * with OS for notifications about device state changes. |
| */ |
| int tipc_eth_media_start(void) |
| { |
| int res; |
| |
| if (eth_started) |
| return -EINVAL; |
| |
| res = tipc_register_media(ð_media_info); |
| if (res) |
| return res; |
| |
| res = register_netdevice_notifier(¬ifier); |
| if (!res) |
| eth_started = 1; |
| return res; |
| } |
| |
| /** |
| * tipc_eth_media_stop - deactivate Ethernet bearer support |
| */ |
| void tipc_eth_media_stop(void) |
| { |
| if (!eth_started) |
| return; |
| |
| flush_scheduled_work(); |
| unregister_netdevice_notifier(¬ifier); |
| eth_started = 0; |
| } |