| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/netdevice.h> |
| #include <linux/netlink.h> |
| #include <net/net_namespace.h> |
| #include <linux/if_arp.h> |
| #include <net/rtnetlink.h> |
| |
| struct pcpu_lstats { |
| u64 packets; |
| u64 bytes; |
| struct u64_stats_sync syncp; |
| }; |
| |
| static netdev_tx_t nlmon_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| int len = skb->len; |
| struct pcpu_lstats *stats = this_cpu_ptr(dev->lstats); |
| |
| u64_stats_update_begin(&stats->syncp); |
| stats->bytes += len; |
| stats->packets++; |
| u64_stats_update_end(&stats->syncp); |
| |
| dev_kfree_skb(skb); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static int nlmon_is_valid_mtu(int new_mtu) |
| { |
| /* Note that in netlink we do not really have an upper limit. On |
| * default, we use NLMSG_GOODSIZE. Here at least we should make |
| * sure that it's at least the header size. |
| */ |
| return new_mtu >= (int) sizeof(struct nlmsghdr); |
| } |
| |
| static int nlmon_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| if (!nlmon_is_valid_mtu(new_mtu)) |
| return -EINVAL; |
| |
| dev->mtu = new_mtu; |
| return 0; |
| } |
| |
| static int nlmon_dev_init(struct net_device *dev) |
| { |
| dev->lstats = alloc_percpu(struct pcpu_lstats); |
| |
| return dev->lstats == NULL ? -ENOMEM : 0; |
| } |
| |
| static void nlmon_dev_uninit(struct net_device *dev) |
| { |
| free_percpu(dev->lstats); |
| } |
| |
| struct nlmon { |
| struct netlink_tap nt; |
| }; |
| |
| static int nlmon_open(struct net_device *dev) |
| { |
| struct nlmon *nlmon = netdev_priv(dev); |
| |
| nlmon->nt.dev = dev; |
| nlmon->nt.module = THIS_MODULE; |
| return netlink_add_tap(&nlmon->nt); |
| } |
| |
| static int nlmon_close(struct net_device *dev) |
| { |
| struct nlmon *nlmon = netdev_priv(dev); |
| |
| return netlink_remove_tap(&nlmon->nt); |
| } |
| |
| static struct rtnl_link_stats64 * |
| nlmon_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) |
| { |
| int i; |
| u64 bytes = 0, packets = 0; |
| |
| for_each_possible_cpu(i) { |
| const struct pcpu_lstats *nl_stats; |
| u64 tbytes, tpackets; |
| unsigned int start; |
| |
| nl_stats = per_cpu_ptr(dev->lstats, i); |
| |
| do { |
| start = u64_stats_fetch_begin_bh(&nl_stats->syncp); |
| tbytes = nl_stats->bytes; |
| tpackets = nl_stats->packets; |
| } while (u64_stats_fetch_retry_bh(&nl_stats->syncp, start)); |
| |
| packets += tpackets; |
| bytes += tbytes; |
| } |
| |
| stats->rx_packets = packets; |
| stats->tx_packets = 0; |
| |
| stats->rx_bytes = bytes; |
| stats->tx_bytes = 0; |
| |
| return stats; |
| } |
| |
| static u32 always_on(struct net_device *dev) |
| { |
| return 1; |
| } |
| |
| static const struct ethtool_ops nlmon_ethtool_ops = { |
| .get_link = always_on, |
| }; |
| |
| static const struct net_device_ops nlmon_ops = { |
| .ndo_init = nlmon_dev_init, |
| .ndo_uninit = nlmon_dev_uninit, |
| .ndo_open = nlmon_open, |
| .ndo_stop = nlmon_close, |
| .ndo_start_xmit = nlmon_xmit, |
| .ndo_get_stats64 = nlmon_get_stats64, |
| .ndo_change_mtu = nlmon_change_mtu, |
| }; |
| |
| static void nlmon_setup(struct net_device *dev) |
| { |
| dev->type = ARPHRD_NETLINK; |
| dev->tx_queue_len = 0; |
| |
| dev->netdev_ops = &nlmon_ops; |
| dev->ethtool_ops = &nlmon_ethtool_ops; |
| dev->destructor = free_netdev; |
| |
| dev->features = NETIF_F_FRAGLIST | NETIF_F_HIGHDMA; |
| dev->flags = IFF_NOARP; |
| |
| /* That's rather a softlimit here, which, of course, |
| * can be altered. Not a real MTU, but what is to be |
| * expected in most cases. |
| */ |
| dev->mtu = NLMSG_GOODSIZE; |
| } |
| |
| static int nlmon_validate(struct nlattr *tb[], struct nlattr *data[]) |
| { |
| if (tb[IFLA_ADDRESS]) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static struct rtnl_link_ops nlmon_link_ops __read_mostly = { |
| .kind = "nlmon", |
| .priv_size = sizeof(struct nlmon), |
| .setup = nlmon_setup, |
| .validate = nlmon_validate, |
| }; |
| |
| static __init int nlmon_register(void) |
| { |
| return rtnl_link_register(&nlmon_link_ops); |
| } |
| |
| static __exit void nlmon_unregister(void) |
| { |
| rtnl_link_unregister(&nlmon_link_ops); |
| } |
| |
| module_init(nlmon_register); |
| module_exit(nlmon_unregister); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Daniel Borkmann <dborkman@redhat.com>"); |
| MODULE_AUTHOR("Mathieu Geli <geli@enseirb.fr>"); |
| MODULE_DESCRIPTION("Netlink monitoring device"); |
| MODULE_ALIAS_RTNL_LINK("nlmon"); |