| /* DVB USB framework compliant Linux driver for the |
| * DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101, |
| * TeVii S600, S630, S650, S660, S480, S421, S632 |
| * Prof 1100, 7500, |
| * Geniatech SU3000 Cards |
| * Copyright (C) 2008-2012 Igor M. Liplianin (liplianin@me.by) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation, version 2. |
| * |
| * see Documentation/dvb/README.dvb-usb for more information |
| */ |
| #include "dw2102.h" |
| #include "si21xx.h" |
| #include "stv0299.h" |
| #include "z0194a.h" |
| #include "stv0288.h" |
| #include "stb6000.h" |
| #include "eds1547.h" |
| #include "cx24116.h" |
| #include "tda1002x.h" |
| #include "mt312.h" |
| #include "zl10039.h" |
| #include "ts2020.h" |
| #include "ds3000.h" |
| #include "stv0900.h" |
| #include "stv6110.h" |
| #include "stb6100.h" |
| #include "stb6100_proc.h" |
| #include "m88rs2000.h" |
| |
| #ifndef USB_PID_DW2102 |
| #define USB_PID_DW2102 0x2102 |
| #endif |
| |
| #ifndef USB_PID_DW2104 |
| #define USB_PID_DW2104 0x2104 |
| #endif |
| |
| #ifndef USB_PID_DW3101 |
| #define USB_PID_DW3101 0x3101 |
| #endif |
| |
| #ifndef USB_PID_CINERGY_S |
| #define USB_PID_CINERGY_S 0x0064 |
| #endif |
| |
| #ifndef USB_PID_TEVII_S630 |
| #define USB_PID_TEVII_S630 0xd630 |
| #endif |
| |
| #ifndef USB_PID_TEVII_S650 |
| #define USB_PID_TEVII_S650 0xd650 |
| #endif |
| |
| #ifndef USB_PID_TEVII_S660 |
| #define USB_PID_TEVII_S660 0xd660 |
| #endif |
| |
| #ifndef USB_PID_TEVII_S480_1 |
| #define USB_PID_TEVII_S480_1 0xd481 |
| #endif |
| |
| #ifndef USB_PID_TEVII_S480_2 |
| #define USB_PID_TEVII_S480_2 0xd482 |
| #endif |
| |
| #ifndef USB_PID_PROF_1100 |
| #define USB_PID_PROF_1100 0xb012 |
| #endif |
| |
| #ifndef USB_PID_TEVII_S421 |
| #define USB_PID_TEVII_S421 0xd421 |
| #endif |
| |
| #ifndef USB_PID_TEVII_S632 |
| #define USB_PID_TEVII_S632 0xd632 |
| #endif |
| |
| #ifndef USB_PID_GOTVIEW_SAT_HD |
| #define USB_PID_GOTVIEW_SAT_HD 0x5456 |
| #endif |
| |
| #define DW210X_READ_MSG 0 |
| #define DW210X_WRITE_MSG 1 |
| |
| #define REG_1F_SYMBOLRATE_BYTE0 0x1f |
| #define REG_20_SYMBOLRATE_BYTE1 0x20 |
| #define REG_21_SYMBOLRATE_BYTE2 0x21 |
| /* on my own*/ |
| #define DW2102_VOLTAGE_CTRL (0x1800) |
| #define SU3000_STREAM_CTRL (0x1900) |
| #define DW2102_RC_QUERY (0x1a00) |
| #define DW2102_LED_CTRL (0x1b00) |
| |
| #define DW2101_FIRMWARE "dvb-usb-dw2101.fw" |
| #define DW2102_FIRMWARE "dvb-usb-dw2102.fw" |
| #define DW2104_FIRMWARE "dvb-usb-dw2104.fw" |
| #define DW3101_FIRMWARE "dvb-usb-dw3101.fw" |
| #define S630_FIRMWARE "dvb-usb-s630.fw" |
| #define S660_FIRMWARE "dvb-usb-s660.fw" |
| #define P1100_FIRMWARE "dvb-usb-p1100.fw" |
| #define P7500_FIRMWARE "dvb-usb-p7500.fw" |
| |
| #define err_str "did not find the firmware file. (%s) " \ |
| "Please see linux/Documentation/dvb/ for more details " \ |
| "on firmware-problems." |
| |
| struct rc_map_dvb_usb_table_table { |
| struct rc_map_table *rc_keys; |
| int rc_keys_size; |
| }; |
| |
| struct su3000_state { |
| u8 initialized; |
| }; |
| |
| struct s6x0_state { |
| int (*old_set_voltage)(struct dvb_frontend *f, fe_sec_voltage_t v); |
| }; |
| |
| /* debug */ |
| static int dvb_usb_dw2102_debug; |
| module_param_named(debug, dvb_usb_dw2102_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer 4=rc(or-able))." |
| DVB_USB_DEBUG_STATUS); |
| |
| /* keymaps */ |
| static int ir_keymap; |
| module_param_named(keymap, ir_keymap, int, 0644); |
| MODULE_PARM_DESC(keymap, "set keymap 0=default 1=dvbworld 2=tevii 3=tbs ..." |
| " 256=none"); |
| |
| /* demod probe */ |
| static int demod_probe = 1; |
| module_param_named(demod, demod_probe, int, 0644); |
| MODULE_PARM_DESC(demod, "demod to probe (1=cx24116 2=stv0903+stv6110 " |
| "4=stv0903+stb6100(or-able))."); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value, |
| u16 index, u8 * data, u16 len, int flags) |
| { |
| int ret; |
| u8 *u8buf; |
| unsigned int pipe = (flags == DW210X_READ_MSG) ? |
| usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0); |
| u8 request_type = (flags == DW210X_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; |
| |
| u8buf = kmalloc(len, GFP_KERNEL); |
| if (!u8buf) |
| return -ENOMEM; |
| |
| |
| if (flags == DW210X_WRITE_MSG) |
| memcpy(u8buf, data, len); |
| ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR, |
| value, index , u8buf, len, 2000); |
| |
| if (flags == DW210X_READ_MSG) |
| memcpy(data, u8buf, len); |
| |
| kfree(u8buf); |
| return ret; |
| } |
| |
| /* I2C */ |
| static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int i = 0; |
| u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0}; |
| u16 value; |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| switch (num) { |
| case 2: |
| /* read stv0299 register */ |
| value = msg[0].buf[0];/* register */ |
| for (i = 0; i < msg[1].len; i++) { |
| dw210x_op_rw(d->udev, 0xb5, value + i, 0, |
| buf6, 2, DW210X_READ_MSG); |
| msg[1].buf[i] = buf6[0]; |
| } |
| break; |
| case 1: |
| switch (msg[0].addr) { |
| case 0x68: |
| /* write to stv0299 register */ |
| buf6[0] = 0x2a; |
| buf6[1] = msg[0].buf[0]; |
| buf6[2] = msg[0].buf[1]; |
| dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| buf6, 3, DW210X_WRITE_MSG); |
| break; |
| case 0x60: |
| if (msg[0].flags == 0) { |
| /* write to tuner pll */ |
| buf6[0] = 0x2c; |
| buf6[1] = 5; |
| buf6[2] = 0xc0; |
| buf6[3] = msg[0].buf[0]; |
| buf6[4] = msg[0].buf[1]; |
| buf6[5] = msg[0].buf[2]; |
| buf6[6] = msg[0].buf[3]; |
| dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| buf6, 7, DW210X_WRITE_MSG); |
| } else { |
| /* read from tuner */ |
| dw210x_op_rw(d->udev, 0xb5, 0, 0, |
| buf6, 1, DW210X_READ_MSG); |
| msg[0].buf[0] = buf6[0]; |
| } |
| break; |
| case (DW2102_RC_QUERY): |
| dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| buf6, 2, DW210X_READ_MSG); |
| msg[0].buf[0] = buf6[0]; |
| msg[0].buf[1] = buf6[1]; |
| break; |
| case (DW2102_VOLTAGE_CTRL): |
| buf6[0] = 0x30; |
| buf6[1] = msg[0].buf[0]; |
| dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| buf6, 2, DW210X_WRITE_MSG); |
| break; |
| } |
| |
| break; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, |
| struct i2c_msg msg[], int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| u8 buf6[] = {0, 0, 0, 0, 0, 0, 0}; |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| switch (num) { |
| case 2: |
| /* read si2109 register by number */ |
| buf6[0] = msg[0].addr << 1; |
| buf6[1] = msg[0].len; |
| buf6[2] = msg[0].buf[0]; |
| dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| buf6, msg[0].len + 2, DW210X_WRITE_MSG); |
| /* read si2109 register */ |
| dw210x_op_rw(d->udev, 0xc3, 0xd0, 0, |
| buf6, msg[1].len + 2, DW210X_READ_MSG); |
| memcpy(msg[1].buf, buf6 + 2, msg[1].len); |
| |
| break; |
| case 1: |
| switch (msg[0].addr) { |
| case 0x68: |
| /* write to si2109 register */ |
| buf6[0] = msg[0].addr << 1; |
| buf6[1] = msg[0].len; |
| memcpy(buf6 + 2, msg[0].buf, msg[0].len); |
| dw210x_op_rw(d->udev, 0xc2, 0, 0, buf6, |
| msg[0].len + 2, DW210X_WRITE_MSG); |
| break; |
| case(DW2102_RC_QUERY): |
| dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| buf6, 2, DW210X_READ_MSG); |
| msg[0].buf[0] = buf6[0]; |
| msg[0].buf[1] = buf6[1]; |
| break; |
| case(DW2102_VOLTAGE_CTRL): |
| buf6[0] = 0x30; |
| buf6[1] = msg[0].buf[0]; |
| dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| buf6, 2, DW210X_WRITE_MSG); |
| break; |
| } |
| break; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| switch (num) { |
| case 2: { |
| /* read */ |
| /* first write first register number */ |
| u8 ibuf[msg[1].len + 2], obuf[3]; |
| obuf[0] = msg[0].addr << 1; |
| obuf[1] = msg[0].len; |
| obuf[2] = msg[0].buf[0]; |
| dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| /* second read registers */ |
| dw210x_op_rw(d->udev, 0xc3, 0xd1 , 0, |
| ibuf, msg[1].len + 2, DW210X_READ_MSG); |
| memcpy(msg[1].buf, ibuf + 2, msg[1].len); |
| |
| break; |
| } |
| case 1: |
| switch (msg[0].addr) { |
| case 0x68: { |
| /* write to register */ |
| u8 obuf[msg[0].len + 2]; |
| obuf[0] = msg[0].addr << 1; |
| obuf[1] = msg[0].len; |
| memcpy(obuf + 2, msg[0].buf, msg[0].len); |
| dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| break; |
| } |
| case 0x61: { |
| /* write to tuner */ |
| u8 obuf[msg[0].len + 2]; |
| obuf[0] = msg[0].addr << 1; |
| obuf[1] = msg[0].len; |
| memcpy(obuf + 2, msg[0].buf, msg[0].len); |
| dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| break; |
| } |
| case(DW2102_RC_QUERY): { |
| u8 ibuf[2]; |
| dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| ibuf, 2, DW210X_READ_MSG); |
| memcpy(msg[0].buf, ibuf , 2); |
| break; |
| } |
| case(DW2102_VOLTAGE_CTRL): { |
| u8 obuf[2]; |
| obuf[0] = 0x30; |
| obuf[1] = msg[0].buf[0]; |
| dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| obuf, 2, DW210X_WRITE_MSG); |
| break; |
| } |
| } |
| |
| break; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int len, i, j; |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| for (j = 0; j < num; j++) { |
| switch (msg[j].addr) { |
| case(DW2102_RC_QUERY): { |
| u8 ibuf[2]; |
| dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| ibuf, 2, DW210X_READ_MSG); |
| memcpy(msg[j].buf, ibuf , 2); |
| break; |
| } |
| case(DW2102_VOLTAGE_CTRL): { |
| u8 obuf[2]; |
| obuf[0] = 0x30; |
| obuf[1] = msg[j].buf[0]; |
| dw210x_op_rw(d->udev, 0xb2, 0, 0, |
| obuf, 2, DW210X_WRITE_MSG); |
| break; |
| } |
| /*case 0x55: cx24116 |
| case 0x6a: stv0903 |
| case 0x68: ds3000, stv0903 |
| case 0x60: ts2020, stv6110, stb6100 */ |
| default: { |
| if (msg[j].flags == I2C_M_RD) { |
| /* read registers */ |
| u8 ibuf[msg[j].len + 2]; |
| dw210x_op_rw(d->udev, 0xc3, |
| (msg[j].addr << 1) + 1, 0, |
| ibuf, msg[j].len + 2, |
| DW210X_READ_MSG); |
| memcpy(msg[j].buf, ibuf + 2, msg[j].len); |
| mdelay(10); |
| } else if (((msg[j].buf[0] == 0xb0) && |
| (msg[j].addr == 0x68)) || |
| ((msg[j].buf[0] == 0xf7) && |
| (msg[j].addr == 0x55))) { |
| /* write firmware */ |
| u8 obuf[19]; |
| obuf[0] = msg[j].addr << 1; |
| obuf[1] = (msg[j].len > 15 ? 17 : msg[j].len); |
| obuf[2] = msg[j].buf[0]; |
| len = msg[j].len - 1; |
| i = 1; |
| do { |
| memcpy(obuf + 3, msg[j].buf + i, |
| (len > 16 ? 16 : len)); |
| dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, (len > 16 ? 16 : len) + 3, |
| DW210X_WRITE_MSG); |
| i += 16; |
| len -= 16; |
| } while (len > 0); |
| } else { |
| /* write registers */ |
| u8 obuf[msg[j].len + 2]; |
| obuf[0] = msg[j].addr << 1; |
| obuf[1] = msg[j].len; |
| memcpy(obuf + 2, msg[j].buf, msg[j].len); |
| dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[j].len + 2, |
| DW210X_WRITE_MSG); |
| } |
| break; |
| } |
| } |
| |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int i; |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| switch (num) { |
| case 2: { |
| /* read */ |
| /* first write first register number */ |
| u8 ibuf[msg[1].len + 2], obuf[3]; |
| obuf[0] = msg[0].addr << 1; |
| obuf[1] = msg[0].len; |
| obuf[2] = msg[0].buf[0]; |
| dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| /* second read registers */ |
| dw210x_op_rw(d->udev, 0xc3, 0x19 , 0, |
| ibuf, msg[1].len + 2, DW210X_READ_MSG); |
| memcpy(msg[1].buf, ibuf + 2, msg[1].len); |
| |
| break; |
| } |
| case 1: |
| switch (msg[0].addr) { |
| case 0x60: |
| case 0x0c: { |
| /* write to register */ |
| u8 obuf[msg[0].len + 2]; |
| obuf[0] = msg[0].addr << 1; |
| obuf[1] = msg[0].len; |
| memcpy(obuf + 2, msg[0].buf, msg[0].len); |
| dw210x_op_rw(d->udev, 0xc2, 0, 0, |
| obuf, msg[0].len + 2, DW210X_WRITE_MSG); |
| break; |
| } |
| case(DW2102_RC_QUERY): { |
| u8 ibuf[2]; |
| dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| ibuf, 2, DW210X_READ_MSG); |
| memcpy(msg[0].buf, ibuf , 2); |
| break; |
| } |
| } |
| |
| break; |
| } |
| |
| for (i = 0; i < num; i++) { |
| deb_xfer("%02x:%02x: %s ", i, msg[i].addr, |
| msg[i].flags == 0 ? ">>>" : "<<<"); |
| debug_dump(msg[i].buf, msg[i].len, deb_xfer); |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| struct usb_device *udev; |
| int len, i, j; |
| |
| if (!d) |
| return -ENODEV; |
| udev = d->udev; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| for (j = 0; j < num; j++) { |
| switch (msg[j].addr) { |
| case (DW2102_RC_QUERY): { |
| u8 ibuf[5]; |
| dw210x_op_rw(d->udev, 0xb8, 0, 0, |
| ibuf, 5, DW210X_READ_MSG); |
| memcpy(msg[j].buf, ibuf + 3, 2); |
| break; |
| } |
| case (DW2102_VOLTAGE_CTRL): { |
| u8 obuf[2]; |
| |
| obuf[0] = 1; |
| obuf[1] = msg[j].buf[1];/* off-on */ |
| dw210x_op_rw(d->udev, 0x8a, 0, 0, |
| obuf, 2, DW210X_WRITE_MSG); |
| obuf[0] = 3; |
| obuf[1] = msg[j].buf[0];/* 13v-18v */ |
| dw210x_op_rw(d->udev, 0x8a, 0, 0, |
| obuf, 2, DW210X_WRITE_MSG); |
| break; |
| } |
| case (DW2102_LED_CTRL): { |
| u8 obuf[2]; |
| |
| obuf[0] = 5; |
| obuf[1] = msg[j].buf[0]; |
| dw210x_op_rw(d->udev, 0x8a, 0, 0, |
| obuf, 2, DW210X_WRITE_MSG); |
| break; |
| } |
| /*case 0x55: cx24116 |
| case 0x6a: stv0903 |
| case 0x68: ds3000, stv0903, rs2000 |
| case 0x60: ts2020, stv6110, stb6100 |
| case 0xa0: eeprom */ |
| default: { |
| if (msg[j].flags == I2C_M_RD) { |
| /* read registers */ |
| u8 ibuf[msg[j].len]; |
| dw210x_op_rw(d->udev, 0x91, 0, 0, |
| ibuf, msg[j].len, |
| DW210X_READ_MSG); |
| memcpy(msg[j].buf, ibuf, msg[j].len); |
| break; |
| } else if ((msg[j].buf[0] == 0xb0) && |
| (msg[j].addr == 0x68)) { |
| /* write firmware */ |
| u8 obuf[19]; |
| obuf[0] = (msg[j].len > 16 ? |
| 18 : msg[j].len + 1); |
| obuf[1] = msg[j].addr << 1; |
| obuf[2] = msg[j].buf[0]; |
| len = msg[j].len - 1; |
| i = 1; |
| do { |
| memcpy(obuf + 3, msg[j].buf + i, |
| (len > 16 ? 16 : len)); |
| dw210x_op_rw(d->udev, 0x80, 0, 0, |
| obuf, (len > 16 ? 16 : len) + 3, |
| DW210X_WRITE_MSG); |
| i += 16; |
| len -= 16; |
| } while (len > 0); |
| } else if (j < (num - 1)) { |
| /* write register addr before read */ |
| u8 obuf[msg[j].len + 2]; |
| obuf[0] = msg[j + 1].len; |
| obuf[1] = (msg[j].addr << 1); |
| memcpy(obuf + 2, msg[j].buf, msg[j].len); |
| dw210x_op_rw(d->udev, |
| udev->descriptor.idProduct == |
| 0x7500 ? 0x92 : 0x90, 0, 0, |
| obuf, msg[j].len + 2, |
| DW210X_WRITE_MSG); |
| break; |
| } else { |
| /* write registers */ |
| u8 obuf[msg[j].len + 2]; |
| obuf[0] = msg[j].len + 1; |
| obuf[1] = (msg[j].addr << 1); |
| memcpy(obuf + 2, msg[j].buf, msg[j].len); |
| dw210x_op_rw(d->udev, 0x80, 0, 0, |
| obuf, msg[j].len + 2, |
| DW210X_WRITE_MSG); |
| break; |
| } |
| break; |
| } |
| } |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| u8 obuf[0x40], ibuf[0x40]; |
| |
| if (!d) |
| return -ENODEV; |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| switch (num) { |
| case 1: |
| switch (msg[0].addr) { |
| case SU3000_STREAM_CTRL: |
| obuf[0] = msg[0].buf[0] + 0x36; |
| obuf[1] = 3; |
| obuf[2] = 0; |
| if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 0, 0) < 0) |
| err("i2c transfer failed."); |
| break; |
| case DW2102_RC_QUERY: |
| obuf[0] = 0x10; |
| if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 2, 0) < 0) |
| err("i2c transfer failed."); |
| msg[0].buf[1] = ibuf[0]; |
| msg[0].buf[0] = ibuf[1]; |
| break; |
| default: |
| /* always i2c write*/ |
| obuf[0] = 0x08; |
| obuf[1] = msg[0].addr; |
| obuf[2] = msg[0].len; |
| |
| memcpy(&obuf[3], msg[0].buf, msg[0].len); |
| |
| if (dvb_usb_generic_rw(d, obuf, msg[0].len + 3, |
| ibuf, 1, 0) < 0) |
| err("i2c transfer failed."); |
| |
| } |
| break; |
| case 2: |
| /* always i2c read */ |
| obuf[0] = 0x09; |
| obuf[1] = msg[0].len; |
| obuf[2] = msg[1].len; |
| obuf[3] = msg[0].addr; |
| memcpy(&obuf[4], msg[0].buf, msg[0].len); |
| |
| if (dvb_usb_generic_rw(d, obuf, msg[0].len + 4, |
| ibuf, msg[1].len + 1, 0) < 0) |
| err("i2c transfer failed."); |
| |
| memcpy(msg[1].buf, &ibuf[1], msg[1].len); |
| break; |
| default: |
| warn("more than 2 i2c messages at a time is not handled yet."); |
| break; |
| } |
| mutex_unlock(&d->i2c_mutex); |
| return num; |
| } |
| |
| static u32 dw210x_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm dw2102_i2c_algo = { |
| .master_xfer = dw2102_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static struct i2c_algorithm dw2102_serit_i2c_algo = { |
| .master_xfer = dw2102_serit_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static struct i2c_algorithm dw2102_earda_i2c_algo = { |
| .master_xfer = dw2102_earda_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static struct i2c_algorithm dw2104_i2c_algo = { |
| .master_xfer = dw2104_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static struct i2c_algorithm dw3101_i2c_algo = { |
| .master_xfer = dw3101_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static struct i2c_algorithm s6x0_i2c_algo = { |
| .master_xfer = s6x0_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static struct i2c_algorithm su3000_i2c_algo = { |
| .master_xfer = su3000_i2c_transfer, |
| .functionality = dw210x_i2c_func, |
| }; |
| |
| static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) |
| { |
| int i; |
| u8 ibuf[] = {0, 0}; |
| u8 eeprom[256], eepromline[16]; |
| |
| for (i = 0; i < 256; i++) { |
| if (dw210x_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW210X_READ_MSG) < 0) { |
| err("read eeprom failed."); |
| return -1; |
| } else { |
| eepromline[i%16] = ibuf[0]; |
| eeprom[i] = ibuf[0]; |
| } |
| if ((i % 16) == 15) { |
| deb_xfer("%02x: ", i - 15); |
| debug_dump(eepromline, 16, deb_xfer); |
| } |
| } |
| |
| memcpy(mac, eeprom + 8, 6); |
| return 0; |
| }; |
| |
| static int s6x0_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) |
| { |
| int i, ret; |
| u8 ibuf[] = { 0 }, obuf[] = { 0 }; |
| u8 eeprom[256], eepromline[16]; |
| struct i2c_msg msg[] = { |
| { |
| .addr = 0xa0 >> 1, |
| .flags = 0, |
| .buf = obuf, |
| .len = 1, |
| }, { |
| .addr = 0xa0 >> 1, |
| .flags = I2C_M_RD, |
| .buf = ibuf, |
| .len = 1, |
| } |
| }; |
| |
| for (i = 0; i < 256; i++) { |
| obuf[0] = i; |
| ret = s6x0_i2c_transfer(&d->i2c_adap, msg, 2); |
| if (ret != 2) { |
| err("read eeprom failed."); |
| return -1; |
| } else { |
| eepromline[i % 16] = ibuf[0]; |
| eeprom[i] = ibuf[0]; |
| } |
| |
| if ((i % 16) == 15) { |
| deb_xfer("%02x: ", i - 15); |
| debug_dump(eepromline, 16, deb_xfer); |
| } |
| } |
| |
| memcpy(mac, eeprom + 16, 6); |
| return 0; |
| }; |
| |
| static int su3000_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) |
| { |
| static u8 command_start[] = {0x00}; |
| static u8 command_stop[] = {0x01}; |
| struct i2c_msg msg = { |
| .addr = SU3000_STREAM_CTRL, |
| .flags = 0, |
| .buf = onoff ? command_start : command_stop, |
| .len = 1 |
| }; |
| |
| i2c_transfer(&adap->dev->i2c_adap, &msg, 1); |
| |
| return 0; |
| } |
| |
| static int su3000_power_ctrl(struct dvb_usb_device *d, int i) |
| { |
| struct su3000_state *state = (struct su3000_state *)d->priv; |
| u8 obuf[] = {0xde, 0}; |
| |
| info("%s: %d, initialized %d\n", __func__, i, state->initialized); |
| |
| if (i && !state->initialized) { |
| state->initialized = 1; |
| /* reset board */ |
| dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0); |
| } |
| |
| return 0; |
| } |
| |
| static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) |
| { |
| int i; |
| u8 obuf[] = { 0x1f, 0xf0 }; |
| u8 ibuf[] = { 0 }; |
| struct i2c_msg msg[] = { |
| { |
| .addr = 0x51, |
| .flags = 0, |
| .buf = obuf, |
| .len = 2, |
| }, { |
| .addr = 0x51, |
| .flags = I2C_M_RD, |
| .buf = ibuf, |
| .len = 1, |
| |
| } |
| }; |
| |
| for (i = 0; i < 6; i++) { |
| obuf[1] = 0xf0 + i; |
| if (i2c_transfer(&d->i2c_adap, msg, 2) != 2) |
| break; |
| else |
| mac[i] = ibuf[0]; |
| |
| debug_dump(mac, 6, printk); |
| } |
| |
| return 0; |
| } |
| |
| static int su3000_identify_state(struct usb_device *udev, |
| struct dvb_usb_device_properties *props, |
| struct dvb_usb_device_description **desc, |
| int *cold) |
| { |
| info("%s\n", __func__); |
| |
| *cold = 0; |
| return 0; |
| } |
| |
| static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) |
| { |
| static u8 command_13v[] = {0x00, 0x01}; |
| static u8 command_18v[] = {0x01, 0x01}; |
| static u8 command_off[] = {0x00, 0x00}; |
| struct i2c_msg msg = { |
| .addr = DW2102_VOLTAGE_CTRL, |
| .flags = 0, |
| .buf = command_off, |
| .len = 2, |
| }; |
| |
| struct dvb_usb_adapter *udev_adap = |
| (struct dvb_usb_adapter *)(fe->dvb->priv); |
| if (voltage == SEC_VOLTAGE_18) |
| msg.buf = command_18v; |
| else if (voltage == SEC_VOLTAGE_13) |
| msg.buf = command_13v; |
| |
| i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1); |
| |
| return 0; |
| } |
| |
| static int s660_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) |
| { |
| struct dvb_usb_adapter *d = |
| (struct dvb_usb_adapter *)(fe->dvb->priv); |
| struct s6x0_state *st = (struct s6x0_state *)d->dev->priv; |
| |
| dw210x_set_voltage(fe, voltage); |
| if (st->old_set_voltage) |
| st->old_set_voltage(fe, voltage); |
| |
| return 0; |
| } |
| |
| static void dw210x_led_ctrl(struct dvb_frontend *fe, int offon) |
| { |
| static u8 led_off[] = { 0 }; |
| static u8 led_on[] = { 1 }; |
| struct i2c_msg msg = { |
| .addr = DW2102_LED_CTRL, |
| .flags = 0, |
| .buf = led_off, |
| .len = 1 |
| }; |
| struct dvb_usb_adapter *udev_adap = |
| (struct dvb_usb_adapter *)(fe->dvb->priv); |
| |
| if (offon) |
| msg.buf = led_on; |
| i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1); |
| } |
| |
| static struct stv0299_config sharp_z0194a_config = { |
| .demod_address = 0x68, |
| .inittab = sharp_z0194a_inittab, |
| .mclk = 88000000UL, |
| .invert = 1, |
| .skip_reinit = 0, |
| .lock_output = STV0299_LOCKOUTPUT_1, |
| .volt13_op0_op1 = STV0299_VOLT13_OP1, |
| .min_delay_ms = 100, |
| .set_symbol_rate = sharp_z0194a_set_symbol_rate, |
| }; |
| |
| static struct cx24116_config dw2104_config = { |
| .demod_address = 0x55, |
| .mpg_clk_pos_pol = 0x01, |
| }; |
| |
| static struct si21xx_config serit_sp1511lhb_config = { |
| .demod_address = 0x68, |
| .min_delay_ms = 100, |
| |
| }; |
| |
| static struct tda10023_config dw3101_tda10023_config = { |
| .demod_address = 0x0c, |
| .invert = 1, |
| }; |
| |
| static struct mt312_config zl313_config = { |
| .demod_address = 0x0e, |
| }; |
| |
| static struct ds3000_config dw2104_ds3000_config = { |
| .demod_address = 0x68, |
| }; |
| |
| static struct ts2020_config dw2104_ts2020_config = { |
| .tuner_address = 0x60, |
| .clk_out_div = 1, |
| }; |
| |
| static struct ds3000_config s660_ds3000_config = { |
| .demod_address = 0x68, |
| .ci_mode = 1, |
| .set_lock_led = dw210x_led_ctrl, |
| }; |
| |
| static struct stv0900_config dw2104a_stv0900_config = { |
| .demod_address = 0x6a, |
| .demod_mode = 0, |
| .xtal = 27000000, |
| .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ |
| .diseqc_mode = 2,/* 2/3 PWM */ |
| .tun1_maddress = 0,/* 0x60 */ |
| .tun1_adc = 0,/* 2 Vpp */ |
| .path1_mode = 3, |
| }; |
| |
| static struct stb6100_config dw2104a_stb6100_config = { |
| .tuner_address = 0x60, |
| .refclock = 27000000, |
| }; |
| |
| static struct stv0900_config dw2104_stv0900_config = { |
| .demod_address = 0x68, |
| .demod_mode = 0, |
| .xtal = 8000000, |
| .clkmode = 3, |
| .diseqc_mode = 2, |
| .tun1_maddress = 0, |
| .tun1_adc = 1,/* 1 Vpp */ |
| .path1_mode = 3, |
| }; |
| |
| static struct stv6110_config dw2104_stv6110_config = { |
| .i2c_address = 0x60, |
| .mclk = 16000000, |
| .clk_div = 1, |
| }; |
| |
| static struct stv0900_config prof_7500_stv0900_config = { |
| .demod_address = 0x6a, |
| .demod_mode = 0, |
| .xtal = 27000000, |
| .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ |
| .diseqc_mode = 2,/* 2/3 PWM */ |
| .tun1_maddress = 0,/* 0x60 */ |
| .tun1_adc = 0,/* 2 Vpp */ |
| .path1_mode = 3, |
| .tun1_type = 3, |
| .set_lock_led = dw210x_led_ctrl, |
| }; |
| |
| static struct ds3000_config su3000_ds3000_config = { |
| .demod_address = 0x68, |
| .ci_mode = 1, |
| .set_lock_led = dw210x_led_ctrl, |
| }; |
| |
| static u8 m88rs2000_inittab[] = { |
| DEMOD_WRITE, 0x9a, 0x30, |
| DEMOD_WRITE, 0x00, 0x01, |
| WRITE_DELAY, 0x19, 0x00, |
| DEMOD_WRITE, 0x00, 0x00, |
| DEMOD_WRITE, 0x9a, 0xb0, |
| DEMOD_WRITE, 0x81, 0xc1, |
| DEMOD_WRITE, 0x81, 0x81, |
| DEMOD_WRITE, 0x86, 0xc6, |
| DEMOD_WRITE, 0x9a, 0x30, |
| DEMOD_WRITE, 0xf0, 0x80, |
| DEMOD_WRITE, 0xf1, 0xbf, |
| DEMOD_WRITE, 0xb0, 0x45, |
| DEMOD_WRITE, 0xb2, 0x01, |
| DEMOD_WRITE, 0x9a, 0xb0, |
| 0xff, 0xaa, 0xff |
| }; |
| |
| static struct m88rs2000_config s421_m88rs2000_config = { |
| .demod_addr = 0x68, |
| .inittab = m88rs2000_inittab, |
| }; |
| |
| static int dw2104_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| struct dvb_tuner_ops *tuner_ops = NULL; |
| |
| if (demod_probe & 4) { |
| d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104a_stv0900_config, |
| &d->dev->i2c_adap, 0); |
| if (d->fe_adap[0].fe != NULL) { |
| if (dvb_attach(stb6100_attach, d->fe_adap[0].fe, |
| &dw2104a_stb6100_config, |
| &d->dev->i2c_adap)) { |
| tuner_ops = &d->fe_adap[0].fe->ops.tuner_ops; |
| tuner_ops->set_frequency = stb6100_set_freq; |
| tuner_ops->get_frequency = stb6100_get_freq; |
| tuner_ops->set_bandwidth = stb6100_set_bandw; |
| tuner_ops->get_bandwidth = stb6100_get_bandw; |
| d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached STV0900+STB6100!\n"); |
| return 0; |
| } |
| } |
| } |
| |
| if (demod_probe & 2) { |
| d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104_stv0900_config, |
| &d->dev->i2c_adap, 0); |
| if (d->fe_adap[0].fe != NULL) { |
| if (dvb_attach(stv6110_attach, d->fe_adap[0].fe, |
| &dw2104_stv6110_config, |
| &d->dev->i2c_adap)) { |
| d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached STV0900+STV6110A!\n"); |
| return 0; |
| } |
| } |
| } |
| |
| if (demod_probe & 1) { |
| d->fe_adap[0].fe = dvb_attach(cx24116_attach, &dw2104_config, |
| &d->dev->i2c_adap); |
| if (d->fe_adap[0].fe != NULL) { |
| d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached cx24116!\n"); |
| return 0; |
| } |
| } |
| |
| d->fe_adap[0].fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config, |
| &d->dev->i2c_adap); |
| if (d->fe_adap[0].fe != NULL) { |
| dvb_attach(ts2020_attach, d->fe_adap[0].fe, |
| &dw2104_ts2020_config, &d->dev->i2c_adap); |
| d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached DS3000!\n"); |
| return 0; |
| } |
| |
| return -EIO; |
| } |
| |
| static struct dvb_usb_device_properties dw2102_properties; |
| static struct dvb_usb_device_properties dw2104_properties; |
| static struct dvb_usb_device_properties s6x0_properties; |
| |
| static int dw2102_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| if (dw2102_properties.i2c_algo == &dw2102_serit_i2c_algo) { |
| /*dw2102_properties.adapter->tuner_attach = NULL;*/ |
| d->fe_adap[0].fe = dvb_attach(si21xx_attach, &serit_sp1511lhb_config, |
| &d->dev->i2c_adap); |
| if (d->fe_adap[0].fe != NULL) { |
| d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached si21xx!\n"); |
| return 0; |
| } |
| } |
| |
| if (dw2102_properties.i2c_algo == &dw2102_earda_i2c_algo) { |
| d->fe_adap[0].fe = dvb_attach(stv0288_attach, &earda_config, |
| &d->dev->i2c_adap); |
| if (d->fe_adap[0].fe != NULL) { |
| if (dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61, |
| &d->dev->i2c_adap)) { |
| d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached stv0288!\n"); |
| return 0; |
| } |
| } |
| } |
| |
| if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) { |
| /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/ |
| d->fe_adap[0].fe = dvb_attach(stv0299_attach, &sharp_z0194a_config, |
| &d->dev->i2c_adap); |
| if (d->fe_adap[0].fe != NULL) { |
| d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached stv0299!\n"); |
| return 0; |
| } |
| } |
| return -EIO; |
| } |
| |
| static int dw3101_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| d->fe_adap[0].fe = dvb_attach(tda10023_attach, &dw3101_tda10023_config, |
| &d->dev->i2c_adap, 0x48); |
| if (d->fe_adap[0].fe != NULL) { |
| info("Attached tda10023!\n"); |
| return 0; |
| } |
| return -EIO; |
| } |
| |
| static int zl100313_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| d->fe_adap[0].fe = dvb_attach(mt312_attach, &zl313_config, |
| &d->dev->i2c_adap); |
| if (d->fe_adap[0].fe != NULL) { |
| if (dvb_attach(zl10039_attach, d->fe_adap[0].fe, 0x60, |
| &d->dev->i2c_adap)) { |
| d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; |
| info("Attached zl100313+zl10039!\n"); |
| return 0; |
| } |
| } |
| |
| return -EIO; |
| } |
| |
| static int stv0288_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| u8 obuf[] = {7, 1}; |
| |
| d->fe_adap[0].fe = dvb_attach(stv0288_attach, &earda_config, |
| &d->dev->i2c_adap); |
| |
| if (d->fe_adap[0].fe == NULL) |
| return -EIO; |
| |
| if (NULL == dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61, &d->dev->i2c_adap)) |
| return -EIO; |
| |
| d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; |
| |
| dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG); |
| |
| info("Attached stv0288+stb6000!\n"); |
| |
| return 0; |
| |
| } |
| |
| static int ds3000_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| struct s6x0_state *st = (struct s6x0_state *)d->dev->priv; |
| u8 obuf[] = {7, 1}; |
| |
| d->fe_adap[0].fe = dvb_attach(ds3000_attach, &s660_ds3000_config, |
| &d->dev->i2c_adap); |
| |
| if (d->fe_adap[0].fe == NULL) |
| return -EIO; |
| |
| dvb_attach(ts2020_attach, d->fe_adap[0].fe, &dw2104_ts2020_config, |
| &d->dev->i2c_adap); |
| |
| st->old_set_voltage = d->fe_adap[0].fe->ops.set_voltage; |
| d->fe_adap[0].fe->ops.set_voltage = s660_set_voltage; |
| |
| dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG); |
| |
| info("Attached ds3000+ds2020!\n"); |
| |
| return 0; |
| } |
| |
| static int prof_7500_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| u8 obuf[] = {7, 1}; |
| |
| d->fe_adap[0].fe = dvb_attach(stv0900_attach, &prof_7500_stv0900_config, |
| &d->dev->i2c_adap, 0); |
| if (d->fe_adap[0].fe == NULL) |
| return -EIO; |
| |
| d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; |
| |
| dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG); |
| |
| info("Attached STV0900+STB6100A!\n"); |
| |
| return 0; |
| } |
| |
| static int su3000_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| u8 obuf[3] = { 0xe, 0x80, 0 }; |
| u8 ibuf[] = { 0 }; |
| |
| if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) |
| err("command 0x0e transfer failed."); |
| |
| obuf[0] = 0xe; |
| obuf[1] = 0x02; |
| obuf[2] = 1; |
| |
| if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) |
| err("command 0x0e transfer failed."); |
| msleep(300); |
| |
| obuf[0] = 0xe; |
| obuf[1] = 0x83; |
| obuf[2] = 0; |
| |
| if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) |
| err("command 0x0e transfer failed."); |
| |
| obuf[0] = 0xe; |
| obuf[1] = 0x83; |
| obuf[2] = 1; |
| |
| if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) |
| err("command 0x0e transfer failed."); |
| |
| obuf[0] = 0x51; |
| |
| if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0) |
| err("command 0x51 transfer failed."); |
| |
| d->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config, |
| &d->dev->i2c_adap); |
| if (d->fe_adap[0].fe == NULL) |
| return -EIO; |
| |
| if (dvb_attach(ts2020_attach, d->fe_adap[0].fe, |
| &dw2104_ts2020_config, |
| &d->dev->i2c_adap)) { |
| info("Attached DS3000/TS2020!\n"); |
| return 0; |
| } |
| |
| info("Failed to attach DS3000/TS2020!\n"); |
| return -EIO; |
| } |
| |
| static int m88rs2000_frontend_attach(struct dvb_usb_adapter *d) |
| { |
| u8 obuf[] = { 0x51 }; |
| u8 ibuf[] = { 0 }; |
| |
| if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0) |
| err("command 0x51 transfer failed."); |
| |
| d->fe_adap[0].fe = dvb_attach(m88rs2000_attach, &s421_m88rs2000_config, |
| &d->dev->i2c_adap); |
| |
| if (d->fe_adap[0].fe == NULL) |
| return -EIO; |
| |
| if (dvb_attach(ts2020_attach, d->fe_adap[0].fe, |
| &dw2104_ts2020_config, |
| &d->dev->i2c_adap)) { |
| info("Attached RS2000/TS2020!\n"); |
| return 0; |
| } |
| |
| info("Failed to attach RS2000/TS2020!\n"); |
| return -EIO; |
| } |
| |
| static int dw2102_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, |
| &adap->dev->i2c_adap, DVB_PLL_OPERA1); |
| return 0; |
| } |
| |
| static int dw3101_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, |
| &adap->dev->i2c_adap, DVB_PLL_TUA6034); |
| |
| return 0; |
| } |
| |
| static struct rc_map_table rc_map_dw210x_table[] = { |
| { 0xf80a, KEY_POWER2 }, /*power*/ |
| { 0xf80c, KEY_MUTE }, /*mute*/ |
| { 0xf811, KEY_1 }, |
| { 0xf812, KEY_2 }, |
| { 0xf813, KEY_3 }, |
| { 0xf814, KEY_4 }, |
| { 0xf815, KEY_5 }, |
| { 0xf816, KEY_6 }, |
| { 0xf817, KEY_7 }, |
| { 0xf818, KEY_8 }, |
| { 0xf819, KEY_9 }, |
| { 0xf810, KEY_0 }, |
| { 0xf81c, KEY_CHANNELUP }, /*ch+*/ |
| { 0xf80f, KEY_CHANNELDOWN }, /*ch-*/ |
| { 0xf81a, KEY_VOLUMEUP }, /*vol+*/ |
| { 0xf80e, KEY_VOLUMEDOWN }, /*vol-*/ |
| { 0xf804, KEY_RECORD }, /*rec*/ |
| { 0xf809, KEY_FAVORITES }, /*fav*/ |
| { 0xf808, KEY_REWIND }, /*rewind*/ |
| { 0xf807, KEY_FASTFORWARD }, /*fast*/ |
| { 0xf80b, KEY_PAUSE }, /*pause*/ |
| { 0xf802, KEY_ESC }, /*cancel*/ |
| { 0xf803, KEY_TAB }, /*tab*/ |
| { 0xf800, KEY_UP }, /*up*/ |
| { 0xf81f, KEY_OK }, /*ok*/ |
| { 0xf801, KEY_DOWN }, /*down*/ |
| { 0xf805, KEY_CAMERA }, /*cap*/ |
| { 0xf806, KEY_STOP }, /*stop*/ |
| { 0xf840, KEY_ZOOM }, /*full*/ |
| { 0xf81e, KEY_TV }, /*tvmode*/ |
| { 0xf81b, KEY_LAST }, /*recall*/ |
| }; |
| |
| static struct rc_map_table rc_map_tevii_table[] = { |
| { 0xf80a, KEY_POWER }, |
| { 0xf80c, KEY_MUTE }, |
| { 0xf811, KEY_1 }, |
| { 0xf812, KEY_2 }, |
| { 0xf813, KEY_3 }, |
| { 0xf814, KEY_4 }, |
| { 0xf815, KEY_5 }, |
| { 0xf816, KEY_6 }, |
| { 0xf817, KEY_7 }, |
| { 0xf818, KEY_8 }, |
| { 0xf819, KEY_9 }, |
| { 0xf810, KEY_0 }, |
| { 0xf81c, KEY_MENU }, |
| { 0xf80f, KEY_VOLUMEDOWN }, |
| { 0xf81a, KEY_LAST }, |
| { 0xf80e, KEY_OPEN }, |
| { 0xf804, KEY_RECORD }, |
| { 0xf809, KEY_VOLUMEUP }, |
| { 0xf808, KEY_CHANNELUP }, |
| { 0xf807, KEY_PVR }, |
| { 0xf80b, KEY_TIME }, |
| { 0xf802, KEY_RIGHT }, |
| { 0xf803, KEY_LEFT }, |
| { 0xf800, KEY_UP }, |
| { 0xf81f, KEY_OK }, |
| { 0xf801, KEY_DOWN }, |
| { 0xf805, KEY_TUNER }, |
| { 0xf806, KEY_CHANNELDOWN }, |
| { 0xf840, KEY_PLAYPAUSE }, |
| { 0xf81e, KEY_REWIND }, |
| { 0xf81b, KEY_FAVORITES }, |
| { 0xf81d, KEY_BACK }, |
| { 0xf84d, KEY_FASTFORWARD }, |
| { 0xf844, KEY_EPG }, |
| { 0xf84c, KEY_INFO }, |
| { 0xf841, KEY_AB }, |
| { 0xf843, KEY_AUDIO }, |
| { 0xf845, KEY_SUBTITLE }, |
| { 0xf84a, KEY_LIST }, |
| { 0xf846, KEY_F1 }, |
| { 0xf847, KEY_F2 }, |
| { 0xf85e, KEY_F3 }, |
| { 0xf85c, KEY_F4 }, |
| { 0xf852, KEY_F5 }, |
| { 0xf85a, KEY_F6 }, |
| { 0xf856, KEY_MODE }, |
| { 0xf858, KEY_SWITCHVIDEOMODE }, |
| }; |
| |
| static struct rc_map_table rc_map_tbs_table[] = { |
| { 0xf884, KEY_POWER }, |
| { 0xf894, KEY_MUTE }, |
| { 0xf887, KEY_1 }, |
| { 0xf886, KEY_2 }, |
| { 0xf885, KEY_3 }, |
| { 0xf88b, KEY_4 }, |
| { 0xf88a, KEY_5 }, |
| { 0xf889, KEY_6 }, |
| { 0xf88f, KEY_7 }, |
| { 0xf88e, KEY_8 }, |
| { 0xf88d, KEY_9 }, |
| { 0xf892, KEY_0 }, |
| { 0xf896, KEY_CHANNELUP }, |
| { 0xf891, KEY_CHANNELDOWN }, |
| { 0xf893, KEY_VOLUMEUP }, |
| { 0xf88c, KEY_VOLUMEDOWN }, |
| { 0xf883, KEY_RECORD }, |
| { 0xf898, KEY_PAUSE }, |
| { 0xf899, KEY_OK }, |
| { 0xf89a, KEY_SHUFFLE }, |
| { 0xf881, KEY_UP }, |
| { 0xf890, KEY_LEFT }, |
| { 0xf882, KEY_RIGHT }, |
| { 0xf888, KEY_DOWN }, |
| { 0xf895, KEY_FAVORITES }, |
| { 0xf897, KEY_SUBTITLE }, |
| { 0xf89d, KEY_ZOOM }, |
| { 0xf89f, KEY_EXIT }, |
| { 0xf89e, KEY_MENU }, |
| { 0xf89c, KEY_EPG }, |
| { 0xf880, KEY_PREVIOUS }, |
| { 0xf89b, KEY_MODE } |
| }; |
| |
| static struct rc_map_table rc_map_su3000_table[] = { |
| { 0x25, KEY_POWER }, /* right-bottom Red */ |
| { 0x0a, KEY_MUTE }, /* -/-- */ |
| { 0x01, KEY_1 }, |
| { 0x02, KEY_2 }, |
| { 0x03, KEY_3 }, |
| { 0x04, KEY_4 }, |
| { 0x05, KEY_5 }, |
| { 0x06, KEY_6 }, |
| { 0x07, KEY_7 }, |
| { 0x08, KEY_8 }, |
| { 0x09, KEY_9 }, |
| { 0x00, KEY_0 }, |
| { 0x20, KEY_UP }, /* CH+ */ |
| { 0x21, KEY_DOWN }, /* CH+ */ |
| { 0x12, KEY_VOLUMEUP }, /* Brightness Up */ |
| { 0x13, KEY_VOLUMEDOWN },/* Brightness Down */ |
| { 0x1f, KEY_RECORD }, |
| { 0x17, KEY_PLAY }, |
| { 0x16, KEY_PAUSE }, |
| { 0x0b, KEY_STOP }, |
| { 0x27, KEY_FASTFORWARD },/* >> */ |
| { 0x26, KEY_REWIND }, /* << */ |
| { 0x0d, KEY_OK }, /* Mute */ |
| { 0x11, KEY_LEFT }, /* VOL- */ |
| { 0x10, KEY_RIGHT }, /* VOL+ */ |
| { 0x29, KEY_BACK }, /* button under 9 */ |
| { 0x2c, KEY_MENU }, /* TTX */ |
| { 0x2b, KEY_EPG }, /* EPG */ |
| { 0x1e, KEY_RED }, /* OSD */ |
| { 0x0e, KEY_GREEN }, /* Window */ |
| { 0x2d, KEY_YELLOW }, /* button under << */ |
| { 0x0f, KEY_BLUE }, /* bottom yellow button */ |
| { 0x14, KEY_AUDIO }, /* Snapshot */ |
| { 0x38, KEY_TV }, /* TV/Radio */ |
| { 0x0c, KEY_ESC } /* upper Red button */ |
| }; |
| |
| static struct rc_map_dvb_usb_table_table keys_tables[] = { |
| { rc_map_dw210x_table, ARRAY_SIZE(rc_map_dw210x_table) }, |
| { rc_map_tevii_table, ARRAY_SIZE(rc_map_tevii_table) }, |
| { rc_map_tbs_table, ARRAY_SIZE(rc_map_tbs_table) }, |
| { rc_map_su3000_table, ARRAY_SIZE(rc_map_su3000_table) }, |
| }; |
| |
| static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state) |
| { |
| struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; |
| int keymap_size = d->props.rc.legacy.rc_map_size; |
| u8 key[2]; |
| struct i2c_msg msg = { |
| .addr = DW2102_RC_QUERY, |
| .flags = I2C_M_RD, |
| .buf = key, |
| .len = 2 |
| }; |
| int i; |
| /* override keymap */ |
| if ((ir_keymap > 0) && (ir_keymap <= ARRAY_SIZE(keys_tables))) { |
| keymap = keys_tables[ir_keymap - 1].rc_keys ; |
| keymap_size = keys_tables[ir_keymap - 1].rc_keys_size; |
| } else if (ir_keymap > ARRAY_SIZE(keys_tables)) |
| return 0; /* none */ |
| |
| *state = REMOTE_NO_KEY_PRESSED; |
| if (d->props.i2c_algo->master_xfer(&d->i2c_adap, &msg, 1) == 1) { |
| for (i = 0; i < keymap_size ; i++) { |
| if (rc5_data(&keymap[i]) == msg.buf[0]) { |
| *state = REMOTE_KEY_PRESSED; |
| *event = keymap[i].keycode; |
| break; |
| } |
| |
| } |
| |
| if ((*state) == REMOTE_KEY_PRESSED) |
| deb_rc("%s: found rc key: %x, %x, event: %x\n", |
| __func__, key[0], key[1], (*event)); |
| else if (key[0] != 0xff) |
| deb_rc("%s: unknown rc key: %x, %x\n", |
| __func__, key[0], key[1]); |
| |
| } |
| |
| return 0; |
| } |
| |
| enum dw2102_table_entry { |
| CYPRESS_DW2102, |
| CYPRESS_DW2101, |
| CYPRESS_DW2104, |
| TEVII_S650, |
| TERRATEC_CINERGY_S, |
| CYPRESS_DW3101, |
| TEVII_S630, |
| PROF_1100, |
| TEVII_S660, |
| PROF_7500, |
| GENIATECH_SU3000, |
| TERRATEC_CINERGY_S2, |
| TEVII_S480_1, |
| TEVII_S480_2, |
| X3M_SPC1400HD, |
| TEVII_S421, |
| TEVII_S632, |
| TERRATEC_CINERGY_S2_R2, |
| GOTVIEW_SAT_HD, |
| }; |
| |
| static struct usb_device_id dw2102_table[] = { |
| [CYPRESS_DW2102] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)}, |
| [CYPRESS_DW2101] = {USB_DEVICE(USB_VID_CYPRESS, 0x2101)}, |
| [CYPRESS_DW2104] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2104)}, |
| [TEVII_S650] = {USB_DEVICE(0x9022, USB_PID_TEVII_S650)}, |
| [TERRATEC_CINERGY_S] = {USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)}, |
| [CYPRESS_DW3101] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)}, |
| [TEVII_S630] = {USB_DEVICE(0x9022, USB_PID_TEVII_S630)}, |
| [PROF_1100] = {USB_DEVICE(0x3011, USB_PID_PROF_1100)}, |
| [TEVII_S660] = {USB_DEVICE(0x9022, USB_PID_TEVII_S660)}, |
| [PROF_7500] = {USB_DEVICE(0x3034, 0x7500)}, |
| [GENIATECH_SU3000] = {USB_DEVICE(0x1f4d, 0x3000)}, |
| [TERRATEC_CINERGY_S2] = {USB_DEVICE(USB_VID_TERRATEC, 0x00a8)}, |
| [TEVII_S480_1] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_1)}, |
| [TEVII_S480_2] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_2)}, |
| [X3M_SPC1400HD] = {USB_DEVICE(0x1f4d, 0x3100)}, |
| [TEVII_S421] = {USB_DEVICE(0x9022, USB_PID_TEVII_S421)}, |
| [TEVII_S632] = {USB_DEVICE(0x9022, USB_PID_TEVII_S632)}, |
| [TERRATEC_CINERGY_S2_R2] = {USB_DEVICE(USB_VID_TERRATEC, 0x00b0)}, |
| [GOTVIEW_SAT_HD] = {USB_DEVICE(0x1FE1, USB_PID_GOTVIEW_SAT_HD)}, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, dw2102_table); |
| |
| static int dw2102_load_firmware(struct usb_device *dev, |
| const struct firmware *frmwr) |
| { |
| u8 *b, *p; |
| int ret = 0, i; |
| u8 reset; |
| u8 reset16[] = {0, 0, 0, 0, 0, 0, 0}; |
| const struct firmware *fw; |
| |
| switch (dev->descriptor.idProduct) { |
| case 0x2101: |
| ret = request_firmware(&fw, DW2101_FIRMWARE, &dev->dev); |
| if (ret != 0) { |
| err(err_str, DW2101_FIRMWARE); |
| return ret; |
| } |
| break; |
| default: |
| fw = frmwr; |
| break; |
| } |
| info("start downloading DW210X firmware"); |
| p = kmalloc(fw->size, GFP_KERNEL); |
| reset = 1; |
| /*stop the CPU*/ |
| dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW210X_WRITE_MSG); |
| dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW210X_WRITE_MSG); |
| |
| if (p != NULL) { |
| memcpy(p, fw->data, fw->size); |
| for (i = 0; i < fw->size; i += 0x40) { |
| b = (u8 *) p + i; |
| if (dw210x_op_rw(dev, 0xa0, i, 0, b , 0x40, |
| DW210X_WRITE_MSG) != 0x40) { |
| err("error while transferring firmware"); |
| ret = -EINVAL; |
| break; |
| } |
| } |
| /* restart the CPU */ |
| reset = 0; |
| if (ret || dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, |
| DW210X_WRITE_MSG) != 1) { |
| err("could not restart the USB controller CPU."); |
| ret = -EINVAL; |
| } |
| if (ret || dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, |
| DW210X_WRITE_MSG) != 1) { |
| err("could not restart the USB controller CPU."); |
| ret = -EINVAL; |
| } |
| /* init registers */ |
| switch (dev->descriptor.idProduct) { |
| case USB_PID_TEVII_S650: |
| dw2104_properties.rc.legacy.rc_map_table = rc_map_tevii_table; |
| dw2104_properties.rc.legacy.rc_map_size = |
| ARRAY_SIZE(rc_map_tevii_table); |
| case USB_PID_DW2104: |
| reset = 1; |
| dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1, |
| DW210X_WRITE_MSG); |
| /* break omitted intentionally */ |
| case USB_PID_DW3101: |
| reset = 0; |
| dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, |
| DW210X_WRITE_MSG); |
| break; |
| case USB_PID_CINERGY_S: |
| case USB_PID_DW2102: |
| dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, |
| DW210X_WRITE_MSG); |
| dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, |
| DW210X_READ_MSG); |
| /* check STV0299 frontend */ |
| dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2, |
| DW210X_READ_MSG); |
| if ((reset16[0] == 0xa1) || (reset16[0] == 0x80)) { |
| dw2102_properties.i2c_algo = &dw2102_i2c_algo; |
| dw2102_properties.adapter->fe[0].tuner_attach = &dw2102_tuner_attach; |
| break; |
| } else { |
| /* check STV0288 frontend */ |
| reset16[0] = 0xd0; |
| reset16[1] = 1; |
| reset16[2] = 0; |
| dw210x_op_rw(dev, 0xc2, 0, 0, &reset16[0], 3, |
| DW210X_WRITE_MSG); |
| dw210x_op_rw(dev, 0xc3, 0xd1, 0, &reset16[0], 3, |
| DW210X_READ_MSG); |
| if (reset16[2] == 0x11) { |
| dw2102_properties.i2c_algo = &dw2102_earda_i2c_algo; |
| break; |
| } |
| } |
| case 0x2101: |
| dw210x_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2, |
| DW210X_READ_MSG); |
| dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, |
| DW210X_READ_MSG); |
| dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, |
| DW210X_READ_MSG); |
| dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, |
| DW210X_READ_MSG); |
| break; |
| } |
| |
| msleep(100); |
| kfree(p); |
| } |
| return ret; |
| } |
| |
| static struct dvb_usb_device_properties dw2102_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = DW2102_FIRMWARE, |
| .no_reconnect = 1, |
| |
| .i2c_algo = &dw2102_serit_i2c_algo, |
| |
| .rc.legacy = { |
| .rc_map_table = rc_map_dw210x_table, |
| .rc_map_size = ARRAY_SIZE(rc_map_dw210x_table), |
| .rc_interval = 150, |
| .rc_query = dw2102_rc_query, |
| }, |
| |
| .generic_bulk_ctrl_endpoint = 0x81, |
| /* parameter for the MPEG2-data transfer */ |
| .num_adapters = 1, |
| .download_firmware = dw2102_load_firmware, |
| .read_mac_address = dw210x_read_mac_address, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .frontend_attach = dw2102_frontend_attach, |
| .stream = { |
| .type = USB_BULK, |
| .count = 8, |
| .endpoint = 0x82, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| }}, |
| } |
| }, |
| .num_device_descs = 3, |
| .devices = { |
| {"DVBWorld DVB-S 2102 USB2.0", |
| {&dw2102_table[CYPRESS_DW2102], NULL}, |
| {NULL}, |
| }, |
| {"DVBWorld DVB-S 2101 USB2.0", |
| {&dw2102_table[CYPRESS_DW2101], NULL}, |
| {NULL}, |
| }, |
| {"TerraTec Cinergy S USB", |
| {&dw2102_table[TERRATEC_CINERGY_S], NULL}, |
| {NULL}, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties dw2104_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = DW2104_FIRMWARE, |
| .no_reconnect = 1, |
| |
| .i2c_algo = &dw2104_i2c_algo, |
| .rc.legacy = { |
| .rc_map_table = rc_map_dw210x_table, |
| .rc_map_size = ARRAY_SIZE(rc_map_dw210x_table), |
| .rc_interval = 150, |
| .rc_query = dw2102_rc_query, |
| }, |
| |
| .generic_bulk_ctrl_endpoint = 0x81, |
| /* parameter for the MPEG2-data transfer */ |
| .num_adapters = 1, |
| .download_firmware = dw2102_load_firmware, |
| .read_mac_address = dw210x_read_mac_address, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .frontend_attach = dw2104_frontend_attach, |
| .stream = { |
| .type = USB_BULK, |
| .count = 8, |
| .endpoint = 0x82, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| }}, |
| } |
| }, |
| .num_device_descs = 2, |
| .devices = { |
| { "DVBWorld DW2104 USB2.0", |
| {&dw2102_table[CYPRESS_DW2104], NULL}, |
| {NULL}, |
| }, |
| { "TeVii S650 USB2.0", |
| {&dw2102_table[TEVII_S650], NULL}, |
| {NULL}, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties dw3101_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .firmware = DW3101_FIRMWARE, |
| .no_reconnect = 1, |
| |
| .i2c_algo = &dw3101_i2c_algo, |
| .rc.legacy = { |
| .rc_map_table = rc_map_dw210x_table, |
| .rc_map_size = ARRAY_SIZE(rc_map_dw210x_table), |
| .rc_interval = 150, |
| .rc_query = dw2102_rc_query, |
| }, |
| |
| .generic_bulk_ctrl_endpoint = 0x81, |
| /* parameter for the MPEG2-data transfer */ |
| .num_adapters = 1, |
| .download_firmware = dw2102_load_firmware, |
| .read_mac_address = dw210x_read_mac_address, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .frontend_attach = dw3101_frontend_attach, |
| .tuner_attach = dw3101_tuner_attach, |
| .stream = { |
| .type = USB_BULK, |
| .count = 8, |
| .endpoint = 0x82, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| }}, |
| } |
| }, |
| .num_device_descs = 1, |
| .devices = { |
| { "DVBWorld DVB-C 3101 USB2.0", |
| {&dw2102_table[CYPRESS_DW3101], NULL}, |
| {NULL}, |
| }, |
| } |
| }; |
| |
| static struct dvb_usb_device_properties s6x0_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .size_of_priv = sizeof(struct s6x0_state), |
| .firmware = S630_FIRMWARE, |
| .no_reconnect = 1, |
| |
| .i2c_algo = &s6x0_i2c_algo, |
| .rc.legacy = { |
| .rc_map_table = rc_map_tevii_table, |
| .rc_map_size = ARRAY_SIZE(rc_map_tevii_table), |
| .rc_interval = 150, |
| .rc_query = dw2102_rc_query, |
| }, |
| |
| .generic_bulk_ctrl_endpoint = 0x81, |
| .num_adapters = 1, |
| .download_firmware = dw2102_load_firmware, |
| .read_mac_address = s6x0_read_mac_address, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .frontend_attach = zl100313_frontend_attach, |
| .stream = { |
| .type = USB_BULK, |
| .count = 8, |
| .endpoint = 0x82, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| }}, |
| } |
| }, |
| .num_device_descs = 1, |
| .devices = { |
| {"TeVii S630 USB", |
| {&dw2102_table[TEVII_S630], NULL}, |
| {NULL}, |
| }, |
| } |
| }; |
| |
| struct dvb_usb_device_properties *p1100; |
| static struct dvb_usb_device_description d1100 = { |
| "Prof 1100 USB ", |
| {&dw2102_table[PROF_1100], NULL}, |
| {NULL}, |
| }; |
| |
| struct dvb_usb_device_properties *s660; |
| static struct dvb_usb_device_description d660 = { |
| "TeVii S660 USB", |
| {&dw2102_table[TEVII_S660], NULL}, |
| {NULL}, |
| }; |
| |
| static struct dvb_usb_device_description d480_1 = { |
| "TeVii S480.1 USB", |
| {&dw2102_table[TEVII_S480_1], NULL}, |
| {NULL}, |
| }; |
| |
| static struct dvb_usb_device_description d480_2 = { |
| "TeVii S480.2 USB", |
| {&dw2102_table[TEVII_S480_2], NULL}, |
| {NULL}, |
| }; |
| |
| struct dvb_usb_device_properties *p7500; |
| static struct dvb_usb_device_description d7500 = { |
| "Prof 7500 USB DVB-S2", |
| {&dw2102_table[PROF_7500], NULL}, |
| {NULL}, |
| }; |
| |
| struct dvb_usb_device_properties *s421; |
| static struct dvb_usb_device_description d421 = { |
| "TeVii S421 PCI", |
| {&dw2102_table[TEVII_S421], NULL}, |
| {NULL}, |
| }; |
| |
| static struct dvb_usb_device_description d632 = { |
| "TeVii S632 USB", |
| {&dw2102_table[TEVII_S632], NULL}, |
| {NULL}, |
| }; |
| |
| static struct dvb_usb_device_properties su3000_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .size_of_priv = sizeof(struct su3000_state), |
| .power_ctrl = su3000_power_ctrl, |
| .num_adapters = 1, |
| .identify_state = su3000_identify_state, |
| .i2c_algo = &su3000_i2c_algo, |
| |
| .rc.legacy = { |
| .rc_map_table = rc_map_su3000_table, |
| .rc_map_size = ARRAY_SIZE(rc_map_su3000_table), |
| .rc_interval = 150, |
| .rc_query = dw2102_rc_query, |
| }, |
| |
| .read_mac_address = su3000_read_mac_address, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = su3000_streaming_ctrl, |
| .frontend_attach = su3000_frontend_attach, |
| .stream = { |
| .type = USB_BULK, |
| .count = 8, |
| .endpoint = 0x82, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| } |
| }}, |
| } |
| }, |
| .num_device_descs = 5, |
| .devices = { |
| { "SU3000HD DVB-S USB2.0", |
| { &dw2102_table[GENIATECH_SU3000], NULL }, |
| { NULL }, |
| }, |
| { "Terratec Cinergy S2 USB HD", |
| { &dw2102_table[TERRATEC_CINERGY_S2], NULL }, |
| { NULL }, |
| }, |
| { "X3M TV SPC1400HD PCI", |
| { &dw2102_table[X3M_SPC1400HD], NULL }, |
| { NULL }, |
| }, |
| { "Terratec Cinergy S2 USB HD Rev.2", |
| { &dw2102_table[TERRATEC_CINERGY_S2_R2], NULL }, |
| { NULL }, |
| }, |
| { "GOTVIEW Satellite HD", |
| { &dw2102_table[GOTVIEW_SAT_HD], NULL }, |
| { NULL }, |
| }, |
| } |
| }; |
| |
| static int dw2102_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| p1100 = kmemdup(&s6x0_properties, |
| sizeof(struct dvb_usb_device_properties), GFP_KERNEL); |
| if (!p1100) |
| return -ENOMEM; |
| /* copy default structure */ |
| /* fill only different fields */ |
| p1100->firmware = P1100_FIRMWARE; |
| p1100->devices[0] = d1100; |
| p1100->rc.legacy.rc_map_table = rc_map_tbs_table; |
| p1100->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table); |
| p1100->adapter->fe[0].frontend_attach = stv0288_frontend_attach; |
| |
| s660 = kmemdup(&s6x0_properties, |
| sizeof(struct dvb_usb_device_properties), GFP_KERNEL); |
| if (!s660) { |
| kfree(p1100); |
| return -ENOMEM; |
| } |
| s660->firmware = S660_FIRMWARE; |
| s660->num_device_descs = 3; |
| s660->devices[0] = d660; |
| s660->devices[1] = d480_1; |
| s660->devices[2] = d480_2; |
| s660->adapter->fe[0].frontend_attach = ds3000_frontend_attach; |
| |
| p7500 = kmemdup(&s6x0_properties, |
| sizeof(struct dvb_usb_device_properties), GFP_KERNEL); |
| if (!p7500) { |
| kfree(p1100); |
| kfree(s660); |
| return -ENOMEM; |
| } |
| p7500->firmware = P7500_FIRMWARE; |
| p7500->devices[0] = d7500; |
| p7500->rc.legacy.rc_map_table = rc_map_tbs_table; |
| p7500->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table); |
| p7500->adapter->fe[0].frontend_attach = prof_7500_frontend_attach; |
| |
| |
| s421 = kmemdup(&su3000_properties, |
| sizeof(struct dvb_usb_device_properties), GFP_KERNEL); |
| if (!s421) { |
| kfree(p1100); |
| kfree(s660); |
| kfree(p7500); |
| return -ENOMEM; |
| } |
| s421->num_device_descs = 2; |
| s421->devices[0] = d421; |
| s421->devices[1] = d632; |
| s421->adapter->fe[0].frontend_attach = m88rs2000_frontend_attach; |
| |
| if (0 == dvb_usb_device_init(intf, &dw2102_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &dw2104_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &dw3101_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &s6x0_properties, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, p1100, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, s660, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, p7500, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, s421, |
| THIS_MODULE, NULL, adapter_nr) || |
| 0 == dvb_usb_device_init(intf, &su3000_properties, |
| THIS_MODULE, NULL, adapter_nr)) |
| return 0; |
| |
| return -ENODEV; |
| } |
| |
| static struct usb_driver dw2102_driver = { |
| .name = "dw2102", |
| .probe = dw2102_probe, |
| .disconnect = dvb_usb_device_exit, |
| .id_table = dw2102_table, |
| }; |
| |
| module_usb_driver(dw2102_driver); |
| |
| MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by"); |
| MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104," |
| " DVB-C 3101 USB2.0," |
| " TeVii S600, S630, S650, S660, S480, S421, S632" |
| " Prof 1100, 7500 USB2.0," |
| " Geniatech SU3000 devices"); |
| MODULE_VERSION("0.1"); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE(DW2101_FIRMWARE); |
| MODULE_FIRMWARE(DW2102_FIRMWARE); |
| MODULE_FIRMWARE(DW2104_FIRMWARE); |
| MODULE_FIRMWARE(DW3101_FIRMWARE); |
| MODULE_FIRMWARE(S630_FIRMWARE); |
| MODULE_FIRMWARE(S660_FIRMWARE); |
| MODULE_FIRMWARE(P1100_FIRMWARE); |
| MODULE_FIRMWARE(P7500_FIRMWARE); |