| * MIX Ethernet controller. |
| |
| Properties: |
| - compatible: "cavium,octeon-5750-mix" |
| |
| Compatibility with all cn5XXX and cn6XXX SOCs populated with MIX |
| devices. |
| |
| - reg: The base addresses of four separate register banks. The first |
| bank contains the MIX registers. The second bank the corresponding |
| AGL registers. The third bank are the AGL registers shared by all |
| MIX devices present. The fourth bank is the AGL_PRT_CTL shared by |
| all MIX devices present. |
| |
| - cell-index: A single cell specifying which portion of the shared |
| register banks corresponds to this MIX device. |
| |
| - interrupts: Two interrupt specifiers. The first is the MIX |
| interrupt routing and the second the routing for the AGL interrupts. |
| |
| - mac-address: Optional, the MAC address to assign to the device. |
| |
| - local-mac-address: Optional, the MAC address to assign to the device |
| if mac-address is not specified. |
| |
| - phy-handle: Optional, a phandle for the PHY device connected to this device. |
| |
| Example: |
| ethernet@1070000100800 { |
| compatible = "cavium,octeon-5750-mix"; |
| reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */ |
| <0x11800 0xE0000800 0x0 0x300>, /* AGL */ |
| <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */ |
| <0x11800 0xE0002008 0x0 0x8>; /* AGL_PRT_CTL */ |
| cell-index = <1>; |
| interrupts = <1 18>, < 1 46>; |
| local-mac-address = [ 00 0f b7 10 63 54 ]; |
| phy-handle = <&phy1>; |
| }; |
