| /* |
| * linux/arch/sh/boards/se/7206/irq.c |
| * |
| * Copyright (C) 2005,2006 Yoshinori Sato |
| * |
| * Hitachi SolutionEngine Support. |
| * |
| */ |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <mach-se/mach/se7206.h> |
| |
| #define INTSTS0 0x31800000 |
| #define INTSTS1 0x31800002 |
| #define INTMSK0 0x31800004 |
| #define INTMSK1 0x31800006 |
| #define INTSEL 0x31800008 |
| |
| #define IRQ0_IRQ 64 |
| #define IRQ1_IRQ 65 |
| #define IRQ3_IRQ 67 |
| |
| #define INTC_IPR01 0xfffe0818 |
| #define INTC_ICR1 0xfffe0802 |
| |
| static void disable_se7206_irq(unsigned int irq) |
| { |
| unsigned short val; |
| unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq))); |
| unsigned short msk0,msk1; |
| |
| /* Set the priority in IPR to 0 */ |
| val = __raw_readw(INTC_IPR01); |
| val &= mask; |
| __raw_writew(val, INTC_IPR01); |
| /* FPGA mask set */ |
| msk0 = __raw_readw(INTMSK0); |
| msk1 = __raw_readw(INTMSK1); |
| |
| switch (irq) { |
| case IRQ0_IRQ: |
| msk0 |= 0x0010; |
| break; |
| case IRQ1_IRQ: |
| msk0 |= 0x000f; |
| break; |
| case IRQ3_IRQ: |
| msk0 |= 0x0f00; |
| msk1 |= 0x00ff; |
| break; |
| } |
| __raw_writew(msk0, INTMSK0); |
| __raw_writew(msk1, INTMSK1); |
| } |
| |
| static void enable_se7206_irq(unsigned int irq) |
| { |
| unsigned short val; |
| unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq))); |
| unsigned short msk0,msk1; |
| |
| /* Set priority in IPR back to original value */ |
| val = __raw_readw(INTC_IPR01); |
| val |= value; |
| __raw_writew(val, INTC_IPR01); |
| |
| /* FPGA mask reset */ |
| msk0 = __raw_readw(INTMSK0); |
| msk1 = __raw_readw(INTMSK1); |
| |
| switch (irq) { |
| case IRQ0_IRQ: |
| msk0 &= ~0x0010; |
| break; |
| case IRQ1_IRQ: |
| msk0 &= ~0x000f; |
| break; |
| case IRQ3_IRQ: |
| msk0 &= ~0x0f00; |
| msk1 &= ~0x00ff; |
| break; |
| } |
| __raw_writew(msk0, INTMSK0); |
| __raw_writew(msk1, INTMSK1); |
| } |
| |
| static void eoi_se7206_irq(unsigned int irq) |
| { |
| unsigned short sts0,sts1; |
| struct irq_desc *desc = irq_to_desc(irq); |
| |
| if (!(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS))) |
| enable_se7206_irq(irq); |
| /* FPGA isr clear */ |
| sts0 = __raw_readw(INTSTS0); |
| sts1 = __raw_readw(INTSTS1); |
| |
| switch (irq) { |
| case IRQ0_IRQ: |
| sts0 &= ~0x0010; |
| break; |
| case IRQ1_IRQ: |
| sts0 &= ~0x000f; |
| break; |
| case IRQ3_IRQ: |
| sts0 &= ~0x0f00; |
| sts1 &= ~0x00ff; |
| break; |
| } |
| __raw_writew(sts0, INTSTS0); |
| __raw_writew(sts1, INTSTS1); |
| } |
| |
| static struct irq_chip se7206_irq_chip __read_mostly = { |
| .name = "SE7206-FPGA", |
| .mask = disable_se7206_irq, |
| .unmask = enable_se7206_irq, |
| .mask_ack = disable_se7206_irq, |
| .eoi = eoi_se7206_irq, |
| }; |
| |
| static void make_se7206_irq(unsigned int irq) |
| { |
| disable_irq_nosync(irq); |
| set_irq_chip_and_handler_name(irq, &se7206_irq_chip, |
| handle_level_irq, "level"); |
| disable_se7206_irq(irq); |
| } |
| |
| /* |
| * Initialize IRQ setting |
| */ |
| void __init init_se7206_IRQ(void) |
| { |
| make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */ |
| make_se7206_irq(IRQ1_IRQ); /* ATA */ |
| make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ |
| __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ |
| |
| /* FPGA System register setup*/ |
| __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */ |
| __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */ |
| /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ |
| __raw_writew(0x0001,INTSEL); |
| } |