| /* |
| * linux/drivers/ide/pci/aec62xx.c Version 0.11 March 27, 2002 |
| * |
| * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/config.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/hdreg.h> |
| #include <linux/ide.h> |
| #include <linux/init.h> |
| |
| #include <asm/io.h> |
| |
| struct chipset_bus_clock_list_entry { |
| u8 xfer_speed; |
| u8 chipset_settings; |
| u8 ultra_settings; |
| }; |
| |
| static struct chipset_bus_clock_list_entry aec6xxx_33_base [] = { |
| { XFER_UDMA_6, 0x31, 0x07 }, |
| { XFER_UDMA_5, 0x31, 0x06 }, |
| { XFER_UDMA_4, 0x31, 0x05 }, |
| { XFER_UDMA_3, 0x31, 0x04 }, |
| { XFER_UDMA_2, 0x31, 0x03 }, |
| { XFER_UDMA_1, 0x31, 0x02 }, |
| { XFER_UDMA_0, 0x31, 0x01 }, |
| |
| { XFER_MW_DMA_2, 0x31, 0x00 }, |
| { XFER_MW_DMA_1, 0x31, 0x00 }, |
| { XFER_MW_DMA_0, 0x0a, 0x00 }, |
| { XFER_PIO_4, 0x31, 0x00 }, |
| { XFER_PIO_3, 0x33, 0x00 }, |
| { XFER_PIO_2, 0x08, 0x00 }, |
| { XFER_PIO_1, 0x0a, 0x00 }, |
| { XFER_PIO_0, 0x00, 0x00 }, |
| { 0, 0x00, 0x00 } |
| }; |
| |
| static struct chipset_bus_clock_list_entry aec6xxx_34_base [] = { |
| { XFER_UDMA_6, 0x41, 0x06 }, |
| { XFER_UDMA_5, 0x41, 0x05 }, |
| { XFER_UDMA_4, 0x41, 0x04 }, |
| { XFER_UDMA_3, 0x41, 0x03 }, |
| { XFER_UDMA_2, 0x41, 0x02 }, |
| { XFER_UDMA_1, 0x41, 0x01 }, |
| { XFER_UDMA_0, 0x41, 0x01 }, |
| |
| { XFER_MW_DMA_2, 0x41, 0x00 }, |
| { XFER_MW_DMA_1, 0x42, 0x00 }, |
| { XFER_MW_DMA_0, 0x7a, 0x00 }, |
| { XFER_PIO_4, 0x41, 0x00 }, |
| { XFER_PIO_3, 0x43, 0x00 }, |
| { XFER_PIO_2, 0x78, 0x00 }, |
| { XFER_PIO_1, 0x7a, 0x00 }, |
| { XFER_PIO_0, 0x70, 0x00 }, |
| { 0, 0x00, 0x00 } |
| }; |
| |
| #define BUSCLOCK(D) \ |
| ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D))) |
| |
| #if 0 |
| if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { |
| (void) pci_read_config_byte(dev, 0x54, &art); |
| p += sprintf(p, "DMA Mode: %s(%s)", |
| (c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO", |
| (art&0x02)?"2":(art&0x01)?"1":"0"); |
| p += sprintf(p, " %s(%s)", |
| (c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO", |
| (art&0x08)?"2":(art&0x04)?"1":"0"); |
| p += sprintf(p, " %s(%s)", |
| (c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO", |
| (art&0x20)?"2":(art&0x10)?"1":"0"); |
| p += sprintf(p, " %s(%s)\n", |
| (c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO", |
| (art&0x80)?"2":(art&0x40)?"1":"0"); |
| } else { |
| #endif |
| |
| /* |
| * TO DO: active tuning and correction of cards without a bios. |
| */ |
| static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) |
| { |
| for ( ; chipset_table->xfer_speed ; chipset_table++) |
| if (chipset_table->xfer_speed == speed) { |
| return chipset_table->chipset_settings; |
| } |
| return chipset_table->chipset_settings; |
| } |
| |
| static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) |
| { |
| for ( ; chipset_table->xfer_speed ; chipset_table++) |
| if (chipset_table->xfer_speed == speed) { |
| return chipset_table->ultra_settings; |
| } |
| return chipset_table->ultra_settings; |
| } |
| |
| static u8 aec62xx_ratemask (ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| u8 mode; |
| |
| switch(hwif->pci_dev->device) { |
| case PCI_DEVICE_ID_ARTOP_ATP865: |
| case PCI_DEVICE_ID_ARTOP_ATP865R: |
| #if 0 |
| mode = (hwif->INB(hwif->dma_master) & 0x10) ? 4 : 3; |
| #else |
| mode = (hwif->INB(((hwif->channel) ? |
| hwif->mate->dma_status : |
| hwif->dma_status)) & 0x10) ? 4 : 3; |
| #endif |
| break; |
| case PCI_DEVICE_ID_ARTOP_ATP860: |
| case PCI_DEVICE_ID_ARTOP_ATP860R: |
| mode = 2; |
| break; |
| case PCI_DEVICE_ID_ARTOP_ATP850UF: |
| default: |
| return 1; |
| } |
| |
| if (!eighty_ninty_three(drive)) |
| mode = min(mode, (u8)1); |
| return mode; |
| } |
| |
| static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| struct pci_dev *dev = hwif->pci_dev; |
| u16 d_conf = 0; |
| u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed); |
| u8 ultra = 0, ultra_conf = 0; |
| u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */ |
| pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf); |
| tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev)); |
| d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf); |
| pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf); |
| |
| tmp1 = 0x00; |
| tmp2 = 0x00; |
| pci_read_config_byte(dev, 0x54, &ultra); |
| tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn)))); |
| ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev)); |
| tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn)))); |
| pci_write_config_byte(dev, 0x54, tmp2); |
| local_irq_restore(flags); |
| return(ide_config_drive_speed(drive, speed)); |
| } |
| |
| static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| struct pci_dev *dev = hwif->pci_dev; |
| u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed); |
| u8 unit = (drive->select.b.unit & 0x01); |
| u8 tmp1 = 0, tmp2 = 0; |
| u8 ultra = 0, drive_conf = 0, ultra_conf = 0; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| /* high 4-bits: Active, low 4-bits: Recovery */ |
| pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf); |
| drive_conf = pci_bus_clock_list(speed, BUSCLOCK(dev)); |
| pci_write_config_byte(dev, 0x40|drive->dn, drive_conf); |
| |
| pci_read_config_byte(dev, (0x44|hwif->channel), &ultra); |
| tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit)))); |
| ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev)); |
| tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit)))); |
| pci_write_config_byte(dev, (0x44|hwif->channel), tmp2); |
| local_irq_restore(flags); |
| return(ide_config_drive_speed(drive, speed)); |
| } |
| |
| static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed) |
| { |
| switch (HWIF(drive)->pci_dev->device) { |
| case PCI_DEVICE_ID_ARTOP_ATP865: |
| case PCI_DEVICE_ID_ARTOP_ATP865R: |
| case PCI_DEVICE_ID_ARTOP_ATP860: |
| case PCI_DEVICE_ID_ARTOP_ATP860R: |
| return ((int) aec6260_tune_chipset(drive, speed)); |
| case PCI_DEVICE_ID_ARTOP_ATP850UF: |
| return ((int) aec6210_tune_chipset(drive, speed)); |
| default: |
| return -1; |
| } |
| } |
| |
| static int config_chipset_for_dma (ide_drive_t *drive) |
| { |
| u8 speed = ide_dma_speed(drive, aec62xx_ratemask(drive)); |
| |
| if (!(speed)) |
| return 0; |
| |
| (void) aec62xx_tune_chipset(drive, speed); |
| return ide_dma_enable(drive); |
| } |
| |
| static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio) |
| { |
| u8 speed = 0; |
| u8 new_pio = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); |
| |
| switch(pio) { |
| case 5: speed = new_pio; break; |
| case 4: speed = XFER_PIO_4; break; |
| case 3: speed = XFER_PIO_3; break; |
| case 2: speed = XFER_PIO_2; break; |
| case 1: speed = XFER_PIO_1; break; |
| default: speed = XFER_PIO_0; break; |
| } |
| (void) aec62xx_tune_chipset(drive, speed); |
| } |
| |
| static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| struct hd_driveid *id = drive->id; |
| |
| if ((id->capability & 1) && drive->autodma) { |
| |
| if (ide_use_dma(drive)) { |
| if (config_chipset_for_dma(drive)) |
| return hwif->ide_dma_on(drive); |
| } |
| |
| goto fast_ata_pio; |
| |
| } else if ((id->capability & 8) || (id->field_valid & 2)) { |
| fast_ata_pio: |
| aec62xx_tune_drive(drive, 5); |
| return hwif->ide_dma_off_quietly(drive); |
| } |
| /* IORDY not supported */ |
| return 0; |
| } |
| |
| static int aec62xx_irq_timeout (ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| struct pci_dev *dev = hwif->pci_dev; |
| |
| switch(dev->device) { |
| case PCI_DEVICE_ID_ARTOP_ATP860: |
| case PCI_DEVICE_ID_ARTOP_ATP860R: |
| case PCI_DEVICE_ID_ARTOP_ATP865: |
| case PCI_DEVICE_ID_ARTOP_ATP865R: |
| printk(" AEC62XX time out "); |
| #if 0 |
| { |
| int i = 0; |
| u8 reg49h = 0; |
| pci_read_config_byte(HWIF(drive)->pci_dev, 0x49, ®49h); |
| for (i=0;i<256;i++) |
| pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h|0x10); |
| pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h & ~0x10); |
| } |
| return 0; |
| #endif |
| default: |
| break; |
| } |
| #if 0 |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| struct pci_dev *dev = hwif->pci_dev; |
| u8 tmp1 = 0, tmp2 = 0, mode6 = 0; |
| |
| pci_read_config_byte(dev, 0x44, &tmp1); |
| pci_read_config_byte(dev, 0x45, &tmp2); |
| printk(" AEC6280 r44=%x r45=%x ",tmp1,tmp2); |
| mode6 = HWIF(drive)->INB(((hwif->channel) ? |
| hwif->mate->dma_status : |
| hwif->dma_status)); |
| printk(" AEC6280 133=%x ", (mode6 & 0x10)); |
| } |
| #endif |
| return 0; |
| } |
| |
| static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name) |
| { |
| int bus_speed = system_bus_clock(); |
| |
| if (dev->resource[PCI_ROM_RESOURCE].start) { |
| pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); |
| printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start); |
| } |
| |
| if (bus_speed <= 33) |
| pci_set_drvdata(dev, (void *) aec6xxx_33_base); |
| else |
| pci_set_drvdata(dev, (void *) aec6xxx_34_base); |
| |
| return dev->irq; |
| } |
| |
| static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) |
| { |
| hwif->autodma = 0; |
| hwif->tuneproc = &aec62xx_tune_drive; |
| hwif->speedproc = &aec62xx_tune_chipset; |
| |
| if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { |
| hwif->serialized = hwif->channel; |
| hwif->no_dsc = 1; |
| } |
| |
| if (hwif->mate) |
| hwif->mate->serialized = hwif->serialized; |
| |
| if (!hwif->dma_base) { |
| hwif->drives[0].autotune = 1; |
| hwif->drives[1].autotune = 1; |
| return; |
| } |
| |
| hwif->ultra_mask = 0x7f; |
| hwif->mwdma_mask = 0x07; |
| hwif->swdma_mask = 0x07; |
| |
| hwif->ide_dma_check = &aec62xx_config_drive_xfer_rate; |
| hwif->ide_dma_lostirq = &aec62xx_irq_timeout; |
| hwif->ide_dma_timeout = &aec62xx_irq_timeout; |
| if (!noautodma) |
| hwif->autodma = 1; |
| hwif->drives[0].autodma = hwif->autodma; |
| hwif->drives[1].autodma = hwif->autodma; |
| } |
| |
| static void __devinit init_dma_aec62xx(ide_hwif_t *hwif, unsigned long dmabase) |
| { |
| struct pci_dev *dev = hwif->pci_dev; |
| |
| if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { |
| u8 reg54h = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ide_lock, flags); |
| pci_read_config_byte(dev, 0x54, ®54h); |
| pci_write_config_byte(dev, 0x54, reg54h & ~(hwif->channel ? 0xF0 : 0x0F)); |
| spin_unlock_irqrestore(&ide_lock, flags); |
| } else { |
| u8 ata66 = 0; |
| pci_read_config_byte(hwif->pci_dev, 0x49, &ata66); |
| if (!(hwif->udma_four)) |
| hwif->udma_four = (ata66&(hwif->channel?0x02:0x01))?0:1; |
| } |
| |
| ide_setup_dma(hwif, dmabase, 8); |
| } |
| |
| static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d) |
| { |
| return ide_setup_pci_device(dev, d); |
| } |
| |
| static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d) |
| { |
| unsigned long bar4reg = pci_resource_start(dev, 4); |
| |
| if (inb(bar4reg+2) & 0x10) { |
| strcpy(d->name, "AEC6880"); |
| if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) |
| strcpy(d->name, "AEC6880R"); |
| } else { |
| strcpy(d->name, "AEC6280"); |
| if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) |
| strcpy(d->name, "AEC6280R"); |
| } |
| |
| return ide_setup_pci_device(dev, d); |
| } |
| |
| static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { |
| { /* 0 */ |
| .name = "AEC6210", |
| .init_setup = init_setup_aec62xx, |
| .init_chipset = init_chipset_aec62xx, |
| .init_hwif = init_hwif_aec62xx, |
| .init_dma = init_dma_aec62xx, |
| .channels = 2, |
| .autodma = AUTODMA, |
| .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, |
| .bootable = OFF_BOARD, |
| },{ /* 1 */ |
| .name = "AEC6260", |
| .init_setup = init_setup_aec62xx, |
| .init_chipset = init_chipset_aec62xx, |
| .init_hwif = init_hwif_aec62xx, |
| .init_dma = init_dma_aec62xx, |
| .channels = 2, |
| .autodma = NOAUTODMA, |
| .bootable = OFF_BOARD, |
| },{ /* 2 */ |
| .name = "AEC6260R", |
| .init_setup = init_setup_aec62xx, |
| .init_chipset = init_chipset_aec62xx, |
| .init_hwif = init_hwif_aec62xx, |
| .init_dma = init_dma_aec62xx, |
| .channels = 2, |
| .autodma = AUTODMA, |
| .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, |
| .bootable = NEVER_BOARD, |
| },{ /* 3 */ |
| .name = "AEC6X80", |
| .init_setup = init_setup_aec6x80, |
| .init_chipset = init_chipset_aec62xx, |
| .init_hwif = init_hwif_aec62xx, |
| .init_dma = init_dma_aec62xx, |
| .channels = 2, |
| .autodma = AUTODMA, |
| .bootable = OFF_BOARD, |
| },{ /* 4 */ |
| .name = "AEC6X80R", |
| .init_setup = init_setup_aec6x80, |
| .init_chipset = init_chipset_aec62xx, |
| .init_hwif = init_hwif_aec62xx, |
| .init_dma = init_dma_aec62xx, |
| .channels = 2, |
| .autodma = AUTODMA, |
| .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, |
| .bootable = OFF_BOARD, |
| } |
| }; |
| |
| /** |
| * aec62xx_init_one - called when a AEC is found |
| * @dev: the aec62xx device |
| * @id: the matching pci id |
| * |
| * Called when the PCI registration layer (or the IDE initialization) |
| * finds a device matching our IDE device tables. |
| */ |
| |
| static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data]; |
| |
| return d->init_setup(dev, d); |
| } |
| |
| static struct pci_device_id aec62xx_pci_tbl[] = { |
| { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, |
| { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, |
| { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, |
| { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl); |
| |
| static struct pci_driver driver = { |
| .name = "AEC62xx_IDE", |
| .id_table = aec62xx_pci_tbl, |
| .probe = aec62xx_init_one, |
| }; |
| |
| static int aec62xx_ide_init(void) |
| { |
| return ide_pci_register_driver(&driver); |
| } |
| |
| module_init(aec62xx_ide_init); |
| |
| MODULE_AUTHOR("Andre Hedrick"); |
| MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE"); |
| MODULE_LICENSE("GPL"); |