| /* |
| * signal32.c: Support 32bit signal syscalls. |
| * |
| * Copyright (C) 2001 IBM |
| * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) |
| * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) |
| * |
| * These routines maintain argument size conversion between 32bit and 64bit |
| * environment. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/smp_lock.h> |
| #include <linux/kernel.h> |
| #include <linux/signal.h> |
| #include <linux/syscalls.h> |
| #include <linux/errno.h> |
| #include <linux/elf.h> |
| #include <linux/compat.h> |
| #include <linux/ptrace.h> |
| #include <asm/ppc32.h> |
| #include <asm/uaccess.h> |
| #include <asm/ppcdebug.h> |
| #include <asm/unistd.h> |
| #include <asm/cacheflush.h> |
| #include <asm/vdso.h> |
| |
| #define DEBUG_SIG 0 |
| |
| #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) |
| |
| #define GP_REGS_SIZE32 min(sizeof(elf_gregset_t32), sizeof(struct pt_regs32)) |
| |
| /* |
| * When we have signals to deliver, we set up on the |
| * user stack, going down from the original stack pointer: |
| * a sigregs32 struct |
| * a sigcontext32 struct |
| * a gap of __SIGNAL_FRAMESIZE32 bytes |
| * |
| * Each of these things must be a multiple of 16 bytes in size. |
| * |
| */ |
| struct sigregs32 { |
| struct mcontext32 mctx; /* all the register values */ |
| /* |
| * Programs using the rs6000/xcoff abi can save up to 19 gp |
| * regs and 18 fp regs below sp before decrementing it. |
| */ |
| int abigap[56]; |
| }; |
| |
| /* We use the mc_pad field for the signal return trampoline. */ |
| #define tramp mc_pad |
| |
| /* |
| * When we have rt signals to deliver, we set up on the |
| * user stack, going down from the original stack pointer: |
| * one rt_sigframe32 struct (siginfo + ucontext + ABI gap) |
| * a gap of __SIGNAL_FRAMESIZE32+16 bytes |
| * (the +16 is to get the siginfo and ucontext32 in the same |
| * positions as in older kernels). |
| * |
| * Each of these things must be a multiple of 16 bytes in size. |
| * |
| */ |
| struct rt_sigframe32 { |
| compat_siginfo_t info; |
| struct ucontext32 uc; |
| /* |
| * Programs using the rs6000/xcoff abi can save up to 19 gp |
| * regs and 18 fp regs below sp before decrementing it. |
| */ |
| int abigap[56]; |
| }; |
| |
| |
| /* |
| * Common utility functions used by signal and context support |
| * |
| */ |
| |
| /* |
| * Restore the user process's signal mask |
| * (implemented in signal.c) |
| */ |
| extern void restore_sigmask(sigset_t *set); |
| |
| /* |
| * Functions for flipping sigsets (thanks to brain dead generic |
| * implementation that makes things simple for little endian only |
| */ |
| static inline void compat_from_sigset(compat_sigset_t *compat, sigset_t *set) |
| { |
| switch (_NSIG_WORDS) { |
| case 4: compat->sig[5] = set->sig[3] & 0xffffffffull ; |
| compat->sig[7] = set->sig[3] >> 32; |
| case 3: compat->sig[4] = set->sig[2] & 0xffffffffull ; |
| compat->sig[5] = set->sig[2] >> 32; |
| case 2: compat->sig[2] = set->sig[1] & 0xffffffffull ; |
| compat->sig[3] = set->sig[1] >> 32; |
| case 1: compat->sig[0] = set->sig[0] & 0xffffffffull ; |
| compat->sig[1] = set->sig[0] >> 32; |
| } |
| } |
| |
| static inline void sigset_from_compat(sigset_t *set, compat_sigset_t *compat) |
| { |
| switch (_NSIG_WORDS) { |
| case 4: set->sig[3] = compat->sig[6] | (((long)compat->sig[7]) << 32); |
| case 3: set->sig[2] = compat->sig[4] | (((long)compat->sig[5]) << 32); |
| case 2: set->sig[1] = compat->sig[2] | (((long)compat->sig[3]) << 32); |
| case 1: set->sig[0] = compat->sig[0] | (((long)compat->sig[1]) << 32); |
| } |
| } |
| |
| |
| /* |
| * Save the current user registers on the user stack. |
| * We only save the altivec registers if the process has used |
| * altivec instructions at some point. |
| */ |
| static int save_user_regs(struct pt_regs *regs, struct mcontext32 __user *frame, int sigret) |
| { |
| elf_greg_t64 *gregs = (elf_greg_t64 *)regs; |
| int i, err = 0; |
| |
| /* Make sure floating point registers are stored in regs */ |
| flush_fp_to_thread(current); |
| |
| /* save general and floating-point registers */ |
| for (i = 0; i <= PT_RESULT; i ++) |
| err |= __put_user((unsigned int)gregs[i], &frame->mc_gregs[i]); |
| err |= __copy_to_user(&frame->mc_fregs, current->thread.fpr, |
| ELF_NFPREG * sizeof(double)); |
| if (err) |
| return 1; |
| |
| current->thread.fpscr = 0; /* turn off all fp exceptions */ |
| |
| #ifdef CONFIG_ALTIVEC |
| /* save altivec registers */ |
| if (current->thread.used_vr) { |
| flush_altivec_to_thread(current); |
| if (__copy_to_user(&frame->mc_vregs, current->thread.vr, |
| ELF_NVRREG32 * sizeof(vector128))) |
| return 1; |
| /* set MSR_VEC in the saved MSR value to indicate that |
| frame->mc_vregs contains valid data */ |
| if (__put_user(regs->msr | MSR_VEC, &frame->mc_gregs[PT_MSR])) |
| return 1; |
| } |
| /* else assert((regs->msr & MSR_VEC) == 0) */ |
| |
| /* We always copy to/from vrsave, it's 0 if we don't have or don't |
| * use altivec. Since VSCR only contains 32 bits saved in the least |
| * significant bits of a vector, we "cheat" and stuff VRSAVE in the |
| * most significant bits of that same vector. --BenH |
| */ |
| if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32])) |
| return 1; |
| #endif /* CONFIG_ALTIVEC */ |
| |
| if (sigret) { |
| /* Set up the sigreturn trampoline: li r0,sigret; sc */ |
| if (__put_user(0x38000000UL + sigret, &frame->tramp[0]) |
| || __put_user(0x44000002UL, &frame->tramp[1])) |
| return 1; |
| flush_icache_range((unsigned long) &frame->tramp[0], |
| (unsigned long) &frame->tramp[2]); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Restore the current user register values from the user stack, |
| * (except for MSR). |
| */ |
| static long restore_user_regs(struct pt_regs *regs, |
| struct mcontext32 __user *sr, int sig) |
| { |
| elf_greg_t64 *gregs = (elf_greg_t64 *)regs; |
| int i; |
| long err = 0; |
| unsigned int save_r2 = 0; |
| #ifdef CONFIG_ALTIVEC |
| unsigned long msr; |
| #endif |
| |
| /* |
| * restore general registers but not including MSR or SOFTE. Also |
| * take care of keeping r2 (TLS) intact if not a signal |
| */ |
| if (!sig) |
| save_r2 = (unsigned int)regs->gpr[2]; |
| for (i = 0; i <= PT_RESULT; i++) { |
| if ((i == PT_MSR) || (i == PT_SOFTE)) |
| continue; |
| err |= __get_user(gregs[i], &sr->mc_gregs[i]); |
| } |
| if (!sig) |
| regs->gpr[2] = (unsigned long) save_r2; |
| if (err) |
| return 1; |
| |
| /* force the process to reload the FP registers from |
| current->thread when it next does FP instructions */ |
| regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1); |
| if (__copy_from_user(current->thread.fpr, &sr->mc_fregs, |
| sizeof(sr->mc_fregs))) |
| return 1; |
| |
| #ifdef CONFIG_ALTIVEC |
| /* force the process to reload the altivec registers from |
| current->thread when it next does altivec instructions */ |
| regs->msr &= ~MSR_VEC; |
| if (!__get_user(msr, &sr->mc_gregs[PT_MSR]) && (msr & MSR_VEC) != 0) { |
| /* restore altivec registers from the stack */ |
| if (__copy_from_user(current->thread.vr, &sr->mc_vregs, |
| sizeof(sr->mc_vregs))) |
| return 1; |
| } else if (current->thread.used_vr) |
| memset(current->thread.vr, 0, ELF_NVRREG32 * sizeof(vector128)); |
| |
| /* Always get VRSAVE back */ |
| if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32])) |
| return 1; |
| #endif /* CONFIG_ALTIVEC */ |
| |
| #ifndef CONFIG_SMP |
| preempt_disable(); |
| if (last_task_used_math == current) |
| last_task_used_math = NULL; |
| if (last_task_used_altivec == current) |
| last_task_used_altivec = NULL; |
| preempt_enable(); |
| #endif |
| return 0; |
| } |
| |
| |
| /* |
| * Start of nonRT signal support |
| * |
| * sigset_t is 32 bits for non-rt signals |
| * |
| * System Calls |
| * sigaction sys32_sigaction |
| * sigreturn sys32_sigreturn |
| * |
| * Note sigsuspend has no special 32 bit routine - uses the 64 bit routine |
| * |
| * Other routines |
| * setup_frame32 |
| */ |
| |
| /* |
| * Atomically swap in the new signal mask, and wait for a signal. |
| */ |
| long sys32_sigsuspend(old_sigset_t mask, int p2, int p3, int p4, int p6, int p7, |
| struct pt_regs *regs) |
| { |
| sigset_t saveset; |
| |
| mask &= _BLOCKABLE; |
| spin_lock_irq(¤t->sighand->siglock); |
| saveset = current->blocked; |
| siginitset(¤t->blocked, mask); |
| recalc_sigpending(); |
| spin_unlock_irq(¤t->sighand->siglock); |
| |
| regs->result = -EINTR; |
| regs->gpr[3] = EINTR; |
| regs->ccr |= 0x10000000; |
| while (1) { |
| current->state = TASK_INTERRUPTIBLE; |
| schedule(); |
| if (do_signal32(&saveset, regs)) |
| /* |
| * Returning 0 means we return to userspace via |
| * ret_from_except and thus restore all user |
| * registers from *regs. This is what we need |
| * to do when a signal has been delivered. |
| */ |
| return 0; |
| } |
| } |
| |
| long sys32_sigaction(int sig, struct old_sigaction32 __user *act, |
| struct old_sigaction32 __user *oact) |
| { |
| struct k_sigaction new_ka, old_ka; |
| int ret; |
| |
| if (sig < 0) |
| sig = -sig; |
| |
| if (act) { |
| compat_old_sigset_t mask; |
| compat_uptr_t handler, restorer; |
| |
| if (get_user(handler, &act->sa_handler) || |
| __get_user(restorer, &act->sa_restorer) || |
| __get_user(new_ka.sa.sa_flags, &act->sa_flags) || |
| __get_user(mask, &act->sa_mask)) |
| return -EFAULT; |
| new_ka.sa.sa_handler = compat_ptr(handler); |
| new_ka.sa.sa_restorer = compat_ptr(restorer); |
| siginitset(&new_ka.sa.sa_mask, mask); |
| } |
| |
| ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); |
| if (!ret && oact) { |
| if (put_user((long)old_ka.sa.sa_handler, &oact->sa_handler) || |
| __put_user((long)old_ka.sa.sa_restorer, &oact->sa_restorer) || |
| __put_user(old_ka.sa.sa_flags, &oact->sa_flags) || |
| __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask)) |
| return -EFAULT; |
| } |
| |
| return ret; |
| } |
| |
| |
| |
| /* |
| * Start of RT signal support |
| * |
| * sigset_t is 64 bits for rt signals |
| * |
| * System Calls |
| * sigaction sys32_rt_sigaction |
| * sigpending sys32_rt_sigpending |
| * sigprocmask sys32_rt_sigprocmask |
| * sigreturn sys32_rt_sigreturn |
| * sigqueueinfo sys32_rt_sigqueueinfo |
| * sigsuspend sys32_rt_sigsuspend |
| * |
| * Other routines |
| * setup_rt_frame32 |
| * copy_siginfo_to_user32 |
| * siginfo32to64 |
| */ |
| |
| |
| long sys32_rt_sigaction(int sig, const struct sigaction32 __user *act, |
| struct sigaction32 __user *oact, size_t sigsetsize) |
| { |
| struct k_sigaction new_ka, old_ka; |
| int ret; |
| compat_sigset_t set32; |
| |
| /* XXX: Don't preclude handling different sized sigset_t's. */ |
| if (sigsetsize != sizeof(compat_sigset_t)) |
| return -EINVAL; |
| |
| if (act) { |
| compat_uptr_t handler; |
| |
| ret = get_user(handler, &act->sa_handler); |
| new_ka.sa.sa_handler = compat_ptr(handler); |
| ret |= __copy_from_user(&set32, &act->sa_mask, |
| sizeof(compat_sigset_t)); |
| sigset_from_compat(&new_ka.sa.sa_mask, &set32); |
| ret |= __get_user(new_ka.sa.sa_flags, &act->sa_flags); |
| if (ret) |
| return -EFAULT; |
| } |
| |
| ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); |
| if (!ret && oact) { |
| compat_from_sigset(&set32, &old_ka.sa.sa_mask); |
| ret = put_user((long)old_ka.sa.sa_handler, &oact->sa_handler); |
| ret |= __copy_to_user(&oact->sa_mask, &set32, |
| sizeof(compat_sigset_t)); |
| ret |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags); |
| } |
| return ret; |
| } |
| |
| /* |
| * Note: it is necessary to treat how as an unsigned int, with the |
| * corresponding cast to a signed int to insure that the proper |
| * conversion (sign extension) between the register representation |
| * of a signed int (msr in 32-bit mode) and the register representation |
| * of a signed int (msr in 64-bit mode) is performed. |
| */ |
| long sys32_rt_sigprocmask(u32 how, compat_sigset_t __user *set, |
| compat_sigset_t __user *oset, size_t sigsetsize) |
| { |
| sigset_t s; |
| sigset_t __user *up; |
| compat_sigset_t s32; |
| int ret; |
| mm_segment_t old_fs = get_fs(); |
| |
| if (set) { |
| if (copy_from_user (&s32, set, sizeof(compat_sigset_t))) |
| return -EFAULT; |
| sigset_from_compat(&s, &s32); |
| } |
| |
| set_fs(KERNEL_DS); |
| /* This is valid because of the set_fs() */ |
| up = (sigset_t __user *) &s; |
| ret = sys_rt_sigprocmask((int)how, set ? up : NULL, oset ? up : NULL, |
| sigsetsize); |
| set_fs(old_fs); |
| if (ret) |
| return ret; |
| if (oset) { |
| compat_from_sigset(&s32, &s); |
| if (copy_to_user (oset, &s32, sizeof(compat_sigset_t))) |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| long sys32_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize) |
| { |
| sigset_t s; |
| compat_sigset_t s32; |
| int ret; |
| mm_segment_t old_fs = get_fs(); |
| |
| set_fs(KERNEL_DS); |
| /* The __user pointer cast is valid because of the set_fs() */ |
| ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize); |
| set_fs(old_fs); |
| if (!ret) { |
| compat_from_sigset(&s32, &s); |
| if (copy_to_user (set, &s32, sizeof(compat_sigset_t))) |
| return -EFAULT; |
| } |
| return ret; |
| } |
| |
| |
| int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s) |
| { |
| int err; |
| |
| if (!access_ok (VERIFY_WRITE, d, sizeof(*d))) |
| return -EFAULT; |
| |
| /* If you change siginfo_t structure, please be sure |
| * this code is fixed accordingly. |
| * It should never copy any pad contained in the structure |
| * to avoid security leaks, but must copy the generic |
| * 3 ints plus the relevant union member. |
| * This routine must convert siginfo from 64bit to 32bit as well |
| * at the same time. |
| */ |
| err = __put_user(s->si_signo, &d->si_signo); |
| err |= __put_user(s->si_errno, &d->si_errno); |
| err |= __put_user((short)s->si_code, &d->si_code); |
| if (s->si_code < 0) |
| err |= __copy_to_user(&d->_sifields._pad, &s->_sifields._pad, |
| SI_PAD_SIZE32); |
| else switch(s->si_code >> 16) { |
| case __SI_CHLD >> 16: |
| err |= __put_user(s->si_pid, &d->si_pid); |
| err |= __put_user(s->si_uid, &d->si_uid); |
| err |= __put_user(s->si_utime, &d->si_utime); |
| err |= __put_user(s->si_stime, &d->si_stime); |
| err |= __put_user(s->si_status, &d->si_status); |
| break; |
| case __SI_FAULT >> 16: |
| err |= __put_user((unsigned int)(unsigned long)s->si_addr, |
| &d->si_addr); |
| break; |
| case __SI_POLL >> 16: |
| err |= __put_user(s->si_band, &d->si_band); |
| err |= __put_user(s->si_fd, &d->si_fd); |
| break; |
| case __SI_TIMER >> 16: |
| err |= __put_user(s->si_tid, &d->si_tid); |
| err |= __put_user(s->si_overrun, &d->si_overrun); |
| err |= __put_user(s->si_int, &d->si_int); |
| break; |
| case __SI_RT >> 16: /* This is not generated by the kernel as of now. */ |
| case __SI_MESGQ >> 16: |
| err |= __put_user(s->si_int, &d->si_int); |
| /* fallthrough */ |
| case __SI_KILL >> 16: |
| default: |
| err |= __put_user(s->si_pid, &d->si_pid); |
| err |= __put_user(s->si_uid, &d->si_uid); |
| break; |
| } |
| return err; |
| } |
| |
| /* |
| * Note: it is necessary to treat pid and sig as unsigned ints, with the |
| * corresponding cast to a signed int to insure that the proper conversion |
| * (sign extension) between the register representation of a signed int |
| * (msr in 32-bit mode) and the register representation of a signed int |
| * (msr in 64-bit mode) is performed. |
| */ |
| long sys32_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo) |
| { |
| siginfo_t info; |
| int ret; |
| mm_segment_t old_fs = get_fs(); |
| |
| if (copy_from_user (&info, uinfo, 3*sizeof(int)) || |
| copy_from_user (info._sifields._pad, uinfo->_sifields._pad, SI_PAD_SIZE32)) |
| return -EFAULT; |
| set_fs (KERNEL_DS); |
| /* The __user pointer cast is valid becasuse of the set_fs() */ |
| ret = sys_rt_sigqueueinfo((int)pid, (int)sig, (siginfo_t __user *) &info); |
| set_fs (old_fs); |
| return ret; |
| } |
| |
| int sys32_rt_sigsuspend(compat_sigset_t __user * unewset, size_t sigsetsize, int p3, |
| int p4, int p6, int p7, struct pt_regs *regs) |
| { |
| sigset_t saveset, newset; |
| compat_sigset_t s32; |
| |
| /* XXX: Don't preclude handling different sized sigset_t's. */ |
| if (sigsetsize != sizeof(sigset_t)) |
| return -EINVAL; |
| |
| if (copy_from_user(&s32, unewset, sizeof(s32))) |
| return -EFAULT; |
| |
| /* |
| * Swap the 2 words of the 64-bit sigset_t (they are stored |
| * in the "wrong" endian in 32-bit user storage). |
| */ |
| sigset_from_compat(&newset, &s32); |
| |
| sigdelsetmask(&newset, ~_BLOCKABLE); |
| spin_lock_irq(¤t->sighand->siglock); |
| saveset = current->blocked; |
| current->blocked = newset; |
| recalc_sigpending(); |
| spin_unlock_irq(¤t->sighand->siglock); |
| |
| regs->result = -EINTR; |
| regs->gpr[3] = EINTR; |
| regs->ccr |= 0x10000000; |
| while (1) { |
| current->state = TASK_INTERRUPTIBLE; |
| schedule(); |
| if (do_signal32(&saveset, regs)) |
| /* |
| * Returning 0 means we return to userspace via |
| * ret_from_except and thus restore all user |
| * registers from *regs. This is what we need |
| * to do when a signal has been delivered. |
| */ |
| return 0; |
| } |
| } |
| |
| /* |
| * Start Alternate signal stack support |
| * |
| * System Calls |
| * sigaltatck sys32_sigaltstack |
| */ |
| |
| int sys32_sigaltstack(u32 __new, u32 __old, int r5, |
| int r6, int r7, int r8, struct pt_regs *regs) |
| { |
| stack_32_t __user * newstack = (stack_32_t __user *)(long) __new; |
| stack_32_t __user * oldstack = (stack_32_t __user *)(long) __old; |
| stack_t uss, uoss; |
| int ret; |
| mm_segment_t old_fs; |
| unsigned long sp; |
| compat_uptr_t ss_sp; |
| |
| /* |
| * set sp to the user stack on entry to the system call |
| * the system call router sets R9 to the saved registers |
| */ |
| sp = regs->gpr[1]; |
| |
| /* Put new stack info in local 64 bit stack struct */ |
| if (newstack) { |
| if (get_user(ss_sp, &newstack->ss_sp) || |
| __get_user(uss.ss_flags, &newstack->ss_flags) || |
| __get_user(uss.ss_size, &newstack->ss_size)) |
| return -EFAULT; |
| uss.ss_sp = compat_ptr(ss_sp); |
| } |
| |
| old_fs = get_fs(); |
| set_fs(KERNEL_DS); |
| /* The __user pointer casts are valid because of the set_fs() */ |
| ret = do_sigaltstack( |
| newstack ? (stack_t __user *) &uss : NULL, |
| oldstack ? (stack_t __user *) &uoss : NULL, |
| sp); |
| set_fs(old_fs); |
| /* Copy the stack information to the user output buffer */ |
| if (!ret && oldstack && |
| (put_user((long)uoss.ss_sp, &oldstack->ss_sp) || |
| __put_user(uoss.ss_flags, &oldstack->ss_flags) || |
| __put_user(uoss.ss_size, &oldstack->ss_size))) |
| return -EFAULT; |
| return ret; |
| } |
| |
| |
| /* |
| * Set up a signal frame for a "real-time" signal handler |
| * (one which gets siginfo). |
| */ |
| static int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, |
| siginfo_t *info, sigset_t *oldset, |
| struct pt_regs * regs, unsigned long newsp) |
| { |
| struct rt_sigframe32 __user *rt_sf; |
| struct mcontext32 __user *frame; |
| unsigned long origsp = newsp; |
| compat_sigset_t c_oldset; |
| |
| /* Set up Signal Frame */ |
| /* Put a Real Time Context onto stack */ |
| newsp -= sizeof(*rt_sf); |
| rt_sf = (struct rt_sigframe32 __user *)newsp; |
| |
| /* create a stack frame for the caller of the handler */ |
| newsp -= __SIGNAL_FRAMESIZE32 + 16; |
| |
| if (!access_ok(VERIFY_WRITE, (void __user *)newsp, origsp - newsp)) |
| goto badframe; |
| |
| compat_from_sigset(&c_oldset, oldset); |
| |
| /* Put the siginfo & fill in most of the ucontext */ |
| if (copy_siginfo_to_user32(&rt_sf->info, info) |
| || __put_user(0, &rt_sf->uc.uc_flags) |
| || __put_user(0, &rt_sf->uc.uc_link) |
| || __put_user(current->sas_ss_sp, &rt_sf->uc.uc_stack.ss_sp) |
| || __put_user(sas_ss_flags(regs->gpr[1]), |
| &rt_sf->uc.uc_stack.ss_flags) |
| || __put_user(current->sas_ss_size, &rt_sf->uc.uc_stack.ss_size) |
| || __put_user((u32)(u64)&rt_sf->uc.uc_mcontext, &rt_sf->uc.uc_regs) |
| || __copy_to_user(&rt_sf->uc.uc_sigmask, &c_oldset, sizeof(c_oldset))) |
| goto badframe; |
| |
| /* Save user registers on the stack */ |
| frame = &rt_sf->uc.uc_mcontext; |
| if (put_user(regs->gpr[1], (u32 __user *)newsp)) |
| goto badframe; |
| |
| if (vdso32_rt_sigtramp && current->thread.vdso_base) { |
| if (save_user_regs(regs, frame, 0)) |
| goto badframe; |
| regs->link = current->thread.vdso_base + vdso32_rt_sigtramp; |
| } else { |
| if (save_user_regs(regs, frame, __NR_rt_sigreturn)) |
| goto badframe; |
| regs->link = (unsigned long) frame->tramp; |
| } |
| regs->gpr[1] = (unsigned long) newsp; |
| regs->gpr[3] = sig; |
| regs->gpr[4] = (unsigned long) &rt_sf->info; |
| regs->gpr[5] = (unsigned long) &rt_sf->uc; |
| regs->gpr[6] = (unsigned long) rt_sf; |
| regs->nip = (unsigned long) ka->sa.sa_handler; |
| regs->trap = 0; |
| regs->result = 0; |
| |
| if (test_thread_flag(TIF_SINGLESTEP)) |
| ptrace_notify(SIGTRAP); |
| |
| return 1; |
| |
| badframe: |
| #if DEBUG_SIG |
| printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n", |
| regs, frame, newsp); |
| #endif |
| force_sigsegv(sig, current); |
| return 0; |
| } |
| |
| static long do_setcontext32(struct ucontext32 __user *ucp, struct pt_regs *regs, int sig) |
| { |
| compat_sigset_t c_set; |
| sigset_t set; |
| u32 mcp; |
| |
| if (__copy_from_user(&c_set, &ucp->uc_sigmask, sizeof(c_set)) |
| || __get_user(mcp, &ucp->uc_regs)) |
| return -EFAULT; |
| sigset_from_compat(&set, &c_set); |
| restore_sigmask(&set); |
| if (restore_user_regs(regs, (struct mcontext32 __user *)(u64)mcp, sig)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| /* |
| * Handle {get,set,swap}_context operations for 32 bits processes |
| */ |
| |
| long sys32_swapcontext(struct ucontext32 __user *old_ctx, |
| struct ucontext32 __user *new_ctx, |
| int ctx_size, int r6, int r7, int r8, struct pt_regs *regs) |
| { |
| unsigned char tmp; |
| compat_sigset_t c_set; |
| |
| /* Context size is for future use. Right now, we only make sure |
| * we are passed something we understand |
| */ |
| if (ctx_size < sizeof(struct ucontext32)) |
| return -EINVAL; |
| |
| if (old_ctx != NULL) { |
| compat_from_sigset(&c_set, ¤t->blocked); |
| if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx)) |
| || save_user_regs(regs, &old_ctx->uc_mcontext, 0) |
| || __copy_to_user(&old_ctx->uc_sigmask, &c_set, sizeof(c_set)) |
| || __put_user((u32)(u64)&old_ctx->uc_mcontext, &old_ctx->uc_regs)) |
| return -EFAULT; |
| } |
| if (new_ctx == NULL) |
| return 0; |
| if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx)) |
| || __get_user(tmp, (u8 __user *) new_ctx) |
| || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1)) |
| return -EFAULT; |
| |
| /* |
| * If we get a fault copying the context into the kernel's |
| * image of the user's registers, we can't just return -EFAULT |
| * because the user's registers will be corrupted. For instance |
| * the NIP value may have been updated but not some of the |
| * other registers. Given that we have done the access_ok |
| * and successfully read the first and last bytes of the region |
| * above, this should only happen in an out-of-memory situation |
| * or if another thread unmaps the region containing the context. |
| * We kill the task with a SIGSEGV in this situation. |
| */ |
| if (do_setcontext32(new_ctx, regs, 0)) |
| do_exit(SIGSEGV); |
| |
| return 0; |
| } |
| |
| long sys32_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, |
| struct pt_regs *regs) |
| { |
| struct rt_sigframe32 __user *rt_sf; |
| int ret; |
| |
| |
| /* Always make any pending restarted system calls return -EINTR */ |
| current_thread_info()->restart_block.fn = do_no_restart_syscall; |
| |
| rt_sf = (struct rt_sigframe32 __user *) |
| (regs->gpr[1] + __SIGNAL_FRAMESIZE32 + 16); |
| if (!access_ok(VERIFY_READ, rt_sf, sizeof(*rt_sf))) |
| goto bad; |
| if (do_setcontext32(&rt_sf->uc, regs, 1)) |
| goto bad; |
| |
| /* |
| * It's not clear whether or why it is desirable to save the |
| * sigaltstack setting on signal delivery and restore it on |
| * signal return. But other architectures do this and we have |
| * always done it up until now so it is probably better not to |
| * change it. -- paulus |
| * We use the sys32_ version that does the 32/64 bits conversion |
| * and takes userland pointer directly. What about error checking ? |
| * nobody does any... |
| */ |
| sys32_sigaltstack((u32)(u64)&rt_sf->uc.uc_stack, 0, 0, 0, 0, 0, regs); |
| |
| ret = regs->result; |
| |
| return ret; |
| |
| bad: |
| force_sig(SIGSEGV, current); |
| return 0; |
| } |
| |
| |
| /* |
| * OK, we're invoking a handler |
| */ |
| static int handle_signal32(unsigned long sig, struct k_sigaction *ka, |
| siginfo_t *info, sigset_t *oldset, |
| struct pt_regs * regs, unsigned long newsp) |
| { |
| struct sigcontext32 __user *sc; |
| struct sigregs32 __user *frame; |
| unsigned long origsp = newsp; |
| |
| /* Set up Signal Frame */ |
| newsp -= sizeof(struct sigregs32); |
| frame = (struct sigregs32 __user *) newsp; |
| |
| /* Put a sigcontext on the stack */ |
| newsp -= sizeof(*sc); |
| sc = (struct sigcontext32 __user *) newsp; |
| |
| /* create a stack frame for the caller of the handler */ |
| newsp -= __SIGNAL_FRAMESIZE32; |
| |
| if (!access_ok(VERIFY_WRITE, (void __user *) newsp, origsp - newsp)) |
| goto badframe; |
| |
| #if _NSIG != 64 |
| #error "Please adjust handle_signal32()" |
| #endif |
| if (__put_user((u32)(u64)ka->sa.sa_handler, &sc->handler) |
| || __put_user(oldset->sig[0], &sc->oldmask) |
| || __put_user((oldset->sig[0] >> 32), &sc->_unused[3]) |
| || __put_user((u32)(u64)frame, &sc->regs) |
| || __put_user(sig, &sc->signal)) |
| goto badframe; |
| |
| if (vdso32_sigtramp && current->thread.vdso_base) { |
| if (save_user_regs(regs, &frame->mctx, 0)) |
| goto badframe; |
| regs->link = current->thread.vdso_base + vdso32_sigtramp; |
| } else { |
| if (save_user_regs(regs, &frame->mctx, __NR_sigreturn)) |
| goto badframe; |
| regs->link = (unsigned long) frame->mctx.tramp; |
| } |
| |
| if (put_user(regs->gpr[1], (u32 __user *)newsp)) |
| goto badframe; |
| regs->gpr[1] = (unsigned long) newsp; |
| regs->gpr[3] = sig; |
| regs->gpr[4] = (unsigned long) sc; |
| regs->nip = (unsigned long) ka->sa.sa_handler; |
| regs->trap = 0; |
| regs->result = 0; |
| |
| if (test_thread_flag(TIF_SINGLESTEP)) |
| ptrace_notify(SIGTRAP); |
| |
| return 1; |
| |
| badframe: |
| #if DEBUG_SIG |
| printk("badframe in handle_signal, regs=%p frame=%x newsp=%x\n", |
| regs, frame, *newspp); |
| #endif |
| force_sigsegv(sig, current); |
| return 0; |
| } |
| |
| /* |
| * Do a signal return; undo the signal stack. |
| */ |
| long sys32_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, |
| struct pt_regs *regs) |
| { |
| struct sigcontext32 __user *sc; |
| struct sigcontext32 sigctx; |
| struct mcontext32 __user *sr; |
| sigset_t set; |
| int ret; |
| |
| /* Always make any pending restarted system calls return -EINTR */ |
| current_thread_info()->restart_block.fn = do_no_restart_syscall; |
| |
| sc = (struct sigcontext32 __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE32); |
| if (copy_from_user(&sigctx, sc, sizeof(sigctx))) |
| goto badframe; |
| |
| /* |
| * Note that PPC32 puts the upper 32 bits of the sigmask in the |
| * unused part of the signal stackframe |
| */ |
| set.sig[0] = sigctx.oldmask + ((long)(sigctx._unused[3]) << 32); |
| restore_sigmask(&set); |
| |
| sr = (struct mcontext32 __user *)(u64)sigctx.regs; |
| if (!access_ok(VERIFY_READ, sr, sizeof(*sr)) |
| || restore_user_regs(regs, sr, 1)) |
| goto badframe; |
| |
| ret = regs->result; |
| return ret; |
| |
| badframe: |
| force_sig(SIGSEGV, current); |
| return 0; |
| } |
| |
| |
| |
| /* |
| * Start of do_signal32 routine |
| * |
| * This routine gets control when a pending signal needs to be processed |
| * in the 32 bit target thread - |
| * |
| * It handles both rt and non-rt signals |
| */ |
| |
| /* |
| * Note that 'init' is a special process: it doesn't get signals it doesn't |
| * want to handle. Thus you cannot kill init even with a SIGKILL even by |
| * mistake. |
| */ |
| |
| int do_signal32(sigset_t *oldset, struct pt_regs *regs) |
| { |
| siginfo_t info; |
| unsigned int frame, newsp; |
| int signr, ret; |
| struct k_sigaction ka; |
| |
| if (!oldset) |
| oldset = ¤t->blocked; |
| |
| newsp = frame = 0; |
| |
| signr = get_signal_to_deliver(&info, &ka, regs, NULL); |
| |
| if (TRAP(regs) == 0x0C00 /* System Call! */ |
| && regs->ccr & 0x10000000 /* error signalled */ |
| && ((ret = regs->gpr[3]) == ERESTARTSYS |
| || ret == ERESTARTNOHAND || ret == ERESTARTNOINTR |
| || ret == ERESTART_RESTARTBLOCK)) { |
| |
| if (signr > 0 |
| && (ret == ERESTARTNOHAND || ret == ERESTART_RESTARTBLOCK |
| || (ret == ERESTARTSYS |
| && !(ka.sa.sa_flags & SA_RESTART)))) { |
| /* make the system call return an EINTR error */ |
| regs->result = -EINTR; |
| regs->gpr[3] = EINTR; |
| /* note that the cr0.SO bit is already set */ |
| } else { |
| regs->nip -= 4; /* Back up & retry system call */ |
| regs->result = 0; |
| regs->trap = 0; |
| if (ret == ERESTART_RESTARTBLOCK) |
| regs->gpr[0] = __NR_restart_syscall; |
| else |
| regs->gpr[3] = regs->orig_gpr3; |
| } |
| } |
| |
| if (signr == 0) |
| return 0; /* no signals delivered */ |
| |
| if ((ka.sa.sa_flags & SA_ONSTACK) && current->sas_ss_size |
| && (!on_sig_stack(regs->gpr[1]))) |
| newsp = (current->sas_ss_sp + current->sas_ss_size); |
| else |
| newsp = regs->gpr[1]; |
| newsp &= ~0xfUL; |
| |
| /* Whee! Actually deliver the signal. */ |
| if (ka.sa.sa_flags & SA_SIGINFO) |
| ret = handle_rt_signal32(signr, &ka, &info, oldset, regs, newsp); |
| else |
| ret = handle_signal32(signr, &ka, &info, oldset, regs, newsp); |
| |
| if (ret && !(ka.sa.sa_flags & SA_NODEFER)) { |
| spin_lock_irq(¤t->sighand->siglock); |
| sigorsets(¤t->blocked, ¤t->blocked, |
| &ka.sa.sa_mask); |
| sigaddset(¤t->blocked, signr); |
| recalc_sigpending(); |
| spin_unlock_irq(¤t->sighand->siglock); |
| } |
| |
| return ret; |
| } |