| /* pci_sabre.c: Sabre specific PCI controller support. |
| * |
| * Copyright (C) 1997, 1998, 1999, 2007 David S. Miller (davem@davemloft.net) |
| * Copyright (C) 1998, 1999 Eddie C. Dost (ecd@skynet.be) |
| * Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com) |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/of_device.h> |
| |
| #include <asm/apb.h> |
| #include <asm/iommu.h> |
| #include <asm/irq.h> |
| #include <asm/prom.h> |
| #include <asm/upa.h> |
| |
| #include "pci_impl.h" |
| #include "iommu_common.h" |
| #include "psycho_common.h" |
| |
| #define DRIVER_NAME "sabre" |
| #define PFX DRIVER_NAME ": " |
| |
| /* SABRE PCI controller register offsets and definitions. */ |
| #define SABRE_UE_AFSR 0x0030UL |
| #define SABRE_UEAFSR_PDRD 0x4000000000000000UL /* Primary PCI DMA Read */ |
| #define SABRE_UEAFSR_PDWR 0x2000000000000000UL /* Primary PCI DMA Write */ |
| #define SABRE_UEAFSR_SDRD 0x0800000000000000UL /* Secondary PCI DMA Read */ |
| #define SABRE_UEAFSR_SDWR 0x0400000000000000UL /* Secondary PCI DMA Write */ |
| #define SABRE_UEAFSR_SDTE 0x0200000000000000UL /* Secondary DMA Translation Error */ |
| #define SABRE_UEAFSR_PDTE 0x0100000000000000UL /* Primary DMA Translation Error */ |
| #define SABRE_UEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask */ |
| #define SABRE_UEAFSR_OFF 0x00000000e0000000UL /* Offset (AFAR bits [5:3] */ |
| #define SABRE_UEAFSR_BLK 0x0000000000800000UL /* Was block operation */ |
| #define SABRE_UECE_AFAR 0x0038UL |
| #define SABRE_CE_AFSR 0x0040UL |
| #define SABRE_CEAFSR_PDRD 0x4000000000000000UL /* Primary PCI DMA Read */ |
| #define SABRE_CEAFSR_PDWR 0x2000000000000000UL /* Primary PCI DMA Write */ |
| #define SABRE_CEAFSR_SDRD 0x0800000000000000UL /* Secondary PCI DMA Read */ |
| #define SABRE_CEAFSR_SDWR 0x0400000000000000UL /* Secondary PCI DMA Write */ |
| #define SABRE_CEAFSR_ESYND 0x00ff000000000000UL /* ECC Syndrome */ |
| #define SABRE_CEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask */ |
| #define SABRE_CEAFSR_OFF 0x00000000e0000000UL /* Offset */ |
| #define SABRE_CEAFSR_BLK 0x0000000000800000UL /* Was block operation */ |
| #define SABRE_UECE_AFAR_ALIAS 0x0048UL /* Aliases to 0x0038 */ |
| #define SABRE_IOMMU_CONTROL 0x0200UL |
| #define SABRE_IOMMUCTRL_ERRSTS 0x0000000006000000UL /* Error status bits */ |
| #define SABRE_IOMMUCTRL_ERR 0x0000000001000000UL /* Error present in IOTLB */ |
| #define SABRE_IOMMUCTRL_LCKEN 0x0000000000800000UL /* IOTLB lock enable */ |
| #define SABRE_IOMMUCTRL_LCKPTR 0x0000000000780000UL /* IOTLB lock pointer */ |
| #define SABRE_IOMMUCTRL_TSBSZ 0x0000000000070000UL /* TSB Size */ |
| #define SABRE_IOMMU_TSBSZ_1K 0x0000000000000000 |
| #define SABRE_IOMMU_TSBSZ_2K 0x0000000000010000 |
| #define SABRE_IOMMU_TSBSZ_4K 0x0000000000020000 |
| #define SABRE_IOMMU_TSBSZ_8K 0x0000000000030000 |
| #define SABRE_IOMMU_TSBSZ_16K 0x0000000000040000 |
| #define SABRE_IOMMU_TSBSZ_32K 0x0000000000050000 |
| #define SABRE_IOMMU_TSBSZ_64K 0x0000000000060000 |
| #define SABRE_IOMMU_TSBSZ_128K 0x0000000000070000 |
| #define SABRE_IOMMUCTRL_TBWSZ 0x0000000000000004UL /* TSB assumed page size */ |
| #define SABRE_IOMMUCTRL_DENAB 0x0000000000000002UL /* Diagnostic Mode Enable */ |
| #define SABRE_IOMMUCTRL_ENAB 0x0000000000000001UL /* IOMMU Enable */ |
| #define SABRE_IOMMU_TSBBASE 0x0208UL |
| #define SABRE_IOMMU_FLUSH 0x0210UL |
| #define SABRE_IMAP_A_SLOT0 0x0c00UL |
| #define SABRE_IMAP_B_SLOT0 0x0c20UL |
| #define SABRE_IMAP_SCSI 0x1000UL |
| #define SABRE_IMAP_ETH 0x1008UL |
| #define SABRE_IMAP_BPP 0x1010UL |
| #define SABRE_IMAP_AU_REC 0x1018UL |
| #define SABRE_IMAP_AU_PLAY 0x1020UL |
| #define SABRE_IMAP_PFAIL 0x1028UL |
| #define SABRE_IMAP_KMS 0x1030UL |
| #define SABRE_IMAP_FLPY 0x1038UL |
| #define SABRE_IMAP_SHW 0x1040UL |
| #define SABRE_IMAP_KBD 0x1048UL |
| #define SABRE_IMAP_MS 0x1050UL |
| #define SABRE_IMAP_SER 0x1058UL |
| #define SABRE_IMAP_UE 0x1070UL |
| #define SABRE_IMAP_CE 0x1078UL |
| #define SABRE_IMAP_PCIERR 0x1080UL |
| #define SABRE_IMAP_GFX 0x1098UL |
| #define SABRE_IMAP_EUPA 0x10a0UL |
| #define SABRE_ICLR_A_SLOT0 0x1400UL |
| #define SABRE_ICLR_B_SLOT0 0x1480UL |
| #define SABRE_ICLR_SCSI 0x1800UL |
| #define SABRE_ICLR_ETH 0x1808UL |
| #define SABRE_ICLR_BPP 0x1810UL |
| #define SABRE_ICLR_AU_REC 0x1818UL |
| #define SABRE_ICLR_AU_PLAY 0x1820UL |
| #define SABRE_ICLR_PFAIL 0x1828UL |
| #define SABRE_ICLR_KMS 0x1830UL |
| #define SABRE_ICLR_FLPY 0x1838UL |
| #define SABRE_ICLR_SHW 0x1840UL |
| #define SABRE_ICLR_KBD 0x1848UL |
| #define SABRE_ICLR_MS 0x1850UL |
| #define SABRE_ICLR_SER 0x1858UL |
| #define SABRE_ICLR_UE 0x1870UL |
| #define SABRE_ICLR_CE 0x1878UL |
| #define SABRE_ICLR_PCIERR 0x1880UL |
| #define SABRE_WRSYNC 0x1c20UL |
| #define SABRE_PCICTRL 0x2000UL |
| #define SABRE_PCICTRL_MRLEN 0x0000001000000000UL /* Use MemoryReadLine for block loads/stores */ |
| #define SABRE_PCICTRL_SERR 0x0000000400000000UL /* Set when SERR asserted on PCI bus */ |
| #define SABRE_PCICTRL_ARBPARK 0x0000000000200000UL /* Bus Parking 0=Ultra-IIi 1=prev-bus-owner */ |
| #define SABRE_PCICTRL_CPUPRIO 0x0000000000100000UL /* Ultra-IIi granted every other bus cycle */ |
| #define SABRE_PCICTRL_ARBPRIO 0x00000000000f0000UL /* Slot which is granted every other bus cycle */ |
| #define SABRE_PCICTRL_ERREN 0x0000000000000100UL /* PCI Error Interrupt Enable */ |
| #define SABRE_PCICTRL_RTRYWE 0x0000000000000080UL /* DMA Flow Control 0=wait-if-possible 1=retry */ |
| #define SABRE_PCICTRL_AEN 0x000000000000000fUL /* Slot PCI arbitration enables */ |
| #define SABRE_PIOAFSR 0x2010UL |
| #define SABRE_PIOAFSR_PMA 0x8000000000000000UL /* Primary Master Abort */ |
| #define SABRE_PIOAFSR_PTA 0x4000000000000000UL /* Primary Target Abort */ |
| #define SABRE_PIOAFSR_PRTRY 0x2000000000000000UL /* Primary Excessive Retries */ |
| #define SABRE_PIOAFSR_PPERR 0x1000000000000000UL /* Primary Parity Error */ |
| #define SABRE_PIOAFSR_SMA 0x0800000000000000UL /* Secondary Master Abort */ |
| #define SABRE_PIOAFSR_STA 0x0400000000000000UL /* Secondary Target Abort */ |
| #define SABRE_PIOAFSR_SRTRY 0x0200000000000000UL /* Secondary Excessive Retries */ |
| #define SABRE_PIOAFSR_SPERR 0x0100000000000000UL /* Secondary Parity Error */ |
| #define SABRE_PIOAFSR_BMSK 0x0000ffff00000000UL /* Byte Mask */ |
| #define SABRE_PIOAFSR_BLK 0x0000000080000000UL /* Was Block Operation */ |
| #define SABRE_PIOAFAR 0x2018UL |
| #define SABRE_PCIDIAG 0x2020UL |
| #define SABRE_PCIDIAG_DRTRY 0x0000000000000040UL /* Disable PIO Retry Limit */ |
| #define SABRE_PCIDIAG_IPAPAR 0x0000000000000008UL /* Invert PIO Address Parity */ |
| #define SABRE_PCIDIAG_IPDPAR 0x0000000000000004UL /* Invert PIO Data Parity */ |
| #define SABRE_PCIDIAG_IDDPAR 0x0000000000000002UL /* Invert DMA Data Parity */ |
| #define SABRE_PCIDIAG_ELPBK 0x0000000000000001UL /* Loopback Enable - not supported */ |
| #define SABRE_PCITASR 0x2028UL |
| #define SABRE_PCITASR_EF 0x0000000000000080UL /* Respond to 0xe0000000-0xffffffff */ |
| #define SABRE_PCITASR_CD 0x0000000000000040UL /* Respond to 0xc0000000-0xdfffffff */ |
| #define SABRE_PCITASR_AB 0x0000000000000020UL /* Respond to 0xa0000000-0xbfffffff */ |
| #define SABRE_PCITASR_89 0x0000000000000010UL /* Respond to 0x80000000-0x9fffffff */ |
| #define SABRE_PCITASR_67 0x0000000000000008UL /* Respond to 0x60000000-0x7fffffff */ |
| #define SABRE_PCITASR_45 0x0000000000000004UL /* Respond to 0x40000000-0x5fffffff */ |
| #define SABRE_PCITASR_23 0x0000000000000002UL /* Respond to 0x20000000-0x3fffffff */ |
| #define SABRE_PCITASR_01 0x0000000000000001UL /* Respond to 0x00000000-0x1fffffff */ |
| #define SABRE_PIOBUF_DIAG 0x5000UL |
| #define SABRE_DMABUF_DIAGLO 0x5100UL |
| #define SABRE_DMABUF_DIAGHI 0x51c0UL |
| #define SABRE_IMAP_GFX_ALIAS 0x6000UL /* Aliases to 0x1098 */ |
| #define SABRE_IMAP_EUPA_ALIAS 0x8000UL /* Aliases to 0x10a0 */ |
| #define SABRE_IOMMU_VADIAG 0xa400UL |
| #define SABRE_IOMMU_TCDIAG 0xa408UL |
| #define SABRE_IOMMU_TAG 0xa580UL |
| #define SABRE_IOMMUTAG_ERRSTS 0x0000000001800000UL /* Error status bits */ |
| #define SABRE_IOMMUTAG_ERR 0x0000000000400000UL /* Error present */ |
| #define SABRE_IOMMUTAG_WRITE 0x0000000000200000UL /* Page is writable */ |
| #define SABRE_IOMMUTAG_STREAM 0x0000000000100000UL /* Streamable bit - unused */ |
| #define SABRE_IOMMUTAG_SIZE 0x0000000000080000UL /* 0=8k 1=16k */ |
| #define SABRE_IOMMUTAG_VPN 0x000000000007ffffUL /* Virtual Page Number [31:13] */ |
| #define SABRE_IOMMU_DATA 0xa600UL |
| #define SABRE_IOMMUDATA_VALID 0x0000000040000000UL /* Valid */ |
| #define SABRE_IOMMUDATA_USED 0x0000000020000000UL /* Used (for LRU algorithm) */ |
| #define SABRE_IOMMUDATA_CACHE 0x0000000010000000UL /* Cacheable */ |
| #define SABRE_IOMMUDATA_PPN 0x00000000001fffffUL /* Physical Page Number [33:13] */ |
| #define SABRE_PCI_IRQSTATE 0xa800UL |
| #define SABRE_OBIO_IRQSTATE 0xa808UL |
| #define SABRE_FFBCFG 0xf000UL |
| #define SABRE_FFBCFG_SPRQS 0x000000000f000000 /* Slave P_RQST queue size */ |
| #define SABRE_FFBCFG_ONEREAD 0x0000000000004000 /* Slave supports one outstanding read */ |
| #define SABRE_MCCTRL0 0xf010UL |
| #define SABRE_MCCTRL0_RENAB 0x0000000080000000 /* Refresh Enable */ |
| #define SABRE_MCCTRL0_EENAB 0x0000000010000000 /* Enable all ECC functions */ |
| #define SABRE_MCCTRL0_11BIT 0x0000000000001000 /* Enable 11-bit column addressing */ |
| #define SABRE_MCCTRL0_DPP 0x0000000000000f00 /* DIMM Pair Present Bits */ |
| #define SABRE_MCCTRL0_RINTVL 0x00000000000000ff /* Refresh Interval */ |
| #define SABRE_MCCTRL1 0xf018UL |
| #define SABRE_MCCTRL1_AMDC 0x0000000038000000 /* Advance Memdata Clock */ |
| #define SABRE_MCCTRL1_ARDC 0x0000000007000000 /* Advance DRAM Read Data Clock */ |
| #define SABRE_MCCTRL1_CSR 0x0000000000e00000 /* CAS to RAS delay for CBR refresh */ |
| #define SABRE_MCCTRL1_CASRW 0x00000000001c0000 /* CAS length for read/write */ |
| #define SABRE_MCCTRL1_RCD 0x0000000000038000 /* RAS to CAS delay */ |
| #define SABRE_MCCTRL1_CP 0x0000000000007000 /* CAS Precharge */ |
| #define SABRE_MCCTRL1_RP 0x0000000000000e00 /* RAS Precharge */ |
| #define SABRE_MCCTRL1_RAS 0x00000000000001c0 /* Length of RAS for refresh */ |
| #define SABRE_MCCTRL1_CASRW2 0x0000000000000038 /* Must be same as CASRW */ |
| #define SABRE_MCCTRL1_RSC 0x0000000000000007 /* RAS after CAS hold time */ |
| #define SABRE_RESETCTRL 0xf020UL |
| |
| #define SABRE_CONFIGSPACE 0x001000000UL |
| #define SABRE_IOSPACE 0x002000000UL |
| #define SABRE_IOSPACE_SIZE 0x000ffffffUL |
| #define SABRE_MEMSPACE 0x100000000UL |
| #define SABRE_MEMSPACE_SIZE 0x07fffffffUL |
| |
| static int hummingbird_p; |
| static struct pci_bus *sabre_root_bus; |
| |
| static irqreturn_t sabre_ue_intr(int irq, void *dev_id) |
| { |
| struct pci_pbm_info *pbm = dev_id; |
| unsigned long afsr_reg = pbm->controller_regs + SABRE_UE_AFSR; |
| unsigned long afar_reg = pbm->controller_regs + SABRE_UECE_AFAR; |
| unsigned long afsr, afar, error_bits; |
| int reported; |
| |
| /* Latch uncorrectable error status. */ |
| afar = upa_readq(afar_reg); |
| afsr = upa_readq(afsr_reg); |
| |
| /* Clear the primary/secondary error status bits. */ |
| error_bits = afsr & |
| (SABRE_UEAFSR_PDRD | SABRE_UEAFSR_PDWR | |
| SABRE_UEAFSR_SDRD | SABRE_UEAFSR_SDWR | |
| SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE); |
| if (!error_bits) |
| return IRQ_NONE; |
| upa_writeq(error_bits, afsr_reg); |
| |
| /* Log the error. */ |
| printk("%s: Uncorrectable Error, primary error type[%s%s]\n", |
| pbm->name, |
| ((error_bits & SABRE_UEAFSR_PDRD) ? |
| "DMA Read" : |
| ((error_bits & SABRE_UEAFSR_PDWR) ? |
| "DMA Write" : "???")), |
| ((error_bits & SABRE_UEAFSR_PDTE) ? |
| ":Translation Error" : "")); |
| printk("%s: bytemask[%04lx] dword_offset[%lx] was_block(%d)\n", |
| pbm->name, |
| (afsr & SABRE_UEAFSR_BMSK) >> 32UL, |
| (afsr & SABRE_UEAFSR_OFF) >> 29UL, |
| ((afsr & SABRE_UEAFSR_BLK) ? 1 : 0)); |
| printk("%s: UE AFAR [%016lx]\n", pbm->name, afar); |
| printk("%s: UE Secondary errors [", pbm->name); |
| reported = 0; |
| if (afsr & SABRE_UEAFSR_SDRD) { |
| reported++; |
| printk("(DMA Read)"); |
| } |
| if (afsr & SABRE_UEAFSR_SDWR) { |
| reported++; |
| printk("(DMA Write)"); |
| } |
| if (afsr & SABRE_UEAFSR_SDTE) { |
| reported++; |
| printk("(Translation Error)"); |
| } |
| if (!reported) |
| printk("(none)"); |
| printk("]\n"); |
| |
| /* Interrogate IOMMU for error status. */ |
| psycho_check_iommu_error(pbm, afsr, afar, UE_ERR); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t sabre_ce_intr(int irq, void *dev_id) |
| { |
| struct pci_pbm_info *pbm = dev_id; |
| unsigned long afsr_reg = pbm->controller_regs + SABRE_CE_AFSR; |
| unsigned long afar_reg = pbm->controller_regs + SABRE_UECE_AFAR; |
| unsigned long afsr, afar, error_bits; |
| int reported; |
| |
| /* Latch error status. */ |
| afar = upa_readq(afar_reg); |
| afsr = upa_readq(afsr_reg); |
| |
| /* Clear primary/secondary error status bits. */ |
| error_bits = afsr & |
| (SABRE_CEAFSR_PDRD | SABRE_CEAFSR_PDWR | |
| SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR); |
| if (!error_bits) |
| return IRQ_NONE; |
| upa_writeq(error_bits, afsr_reg); |
| |
| /* Log the error. */ |
| printk("%s: Correctable Error, primary error type[%s]\n", |
| pbm->name, |
| ((error_bits & SABRE_CEAFSR_PDRD) ? |
| "DMA Read" : |
| ((error_bits & SABRE_CEAFSR_PDWR) ? |
| "DMA Write" : "???"))); |
| |
| /* XXX Use syndrome and afar to print out module string just like |
| * XXX UDB CE trap handler does... -DaveM |
| */ |
| printk("%s: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] " |
| "was_block(%d)\n", |
| pbm->name, |
| (afsr & SABRE_CEAFSR_ESYND) >> 48UL, |
| (afsr & SABRE_CEAFSR_BMSK) >> 32UL, |
| (afsr & SABRE_CEAFSR_OFF) >> 29UL, |
| ((afsr & SABRE_CEAFSR_BLK) ? 1 : 0)); |
| printk("%s: CE AFAR [%016lx]\n", pbm->name, afar); |
| printk("%s: CE Secondary errors [", pbm->name); |
| reported = 0; |
| if (afsr & SABRE_CEAFSR_SDRD) { |
| reported++; |
| printk("(DMA Read)"); |
| } |
| if (afsr & SABRE_CEAFSR_SDWR) { |
| reported++; |
| printk("(DMA Write)"); |
| } |
| if (!reported) |
| printk("(none)"); |
| printk("]\n"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void sabre_register_error_handlers(struct pci_pbm_info *pbm) |
| { |
| struct device_node *dp = pbm->op->node; |
| struct of_device *op; |
| unsigned long base = pbm->controller_regs; |
| u64 tmp; |
| int err; |
| |
| if (pbm->chip_type == PBM_CHIP_TYPE_SABRE) |
| dp = dp->parent; |
| |
| op = of_find_device_by_node(dp); |
| if (!op) |
| return; |
| |
| /* Sabre/Hummingbird IRQ property layout is: |
| * 0: PCI ERR |
| * 1: UE ERR |
| * 2: CE ERR |
| * 3: POWER FAIL |
| */ |
| if (op->num_irqs < 4) |
| return; |
| |
| /* We clear the error bits in the appropriate AFSR before |
| * registering the handler so that we don't get spurious |
| * interrupts. |
| */ |
| upa_writeq((SABRE_UEAFSR_PDRD | SABRE_UEAFSR_PDWR | |
| SABRE_UEAFSR_SDRD | SABRE_UEAFSR_SDWR | |
| SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE), |
| base + SABRE_UE_AFSR); |
| |
| err = request_irq(op->irqs[1], sabre_ue_intr, 0, "SABRE_UE", pbm); |
| if (err) |
| printk(KERN_WARNING "%s: Couldn't register UE, err=%d.\n", |
| pbm->name, err); |
| |
| upa_writeq((SABRE_CEAFSR_PDRD | SABRE_CEAFSR_PDWR | |
| SABRE_CEAFSR_SDRD | SABRE_CEAFSR_SDWR), |
| base + SABRE_CE_AFSR); |
| |
| |
| err = request_irq(op->irqs[2], sabre_ce_intr, 0, "SABRE_CE", pbm); |
| if (err) |
| printk(KERN_WARNING "%s: Couldn't register CE, err=%d.\n", |
| pbm->name, err); |
| err = request_irq(op->irqs[0], psycho_pcierr_intr, 0, |
| "SABRE_PCIERR", pbm); |
| if (err) |
| printk(KERN_WARNING "%s: Couldn't register PCIERR, err=%d.\n", |
| pbm->name, err); |
| |
| tmp = upa_readq(base + SABRE_PCICTRL); |
| tmp |= SABRE_PCICTRL_ERREN; |
| upa_writeq(tmp, base + SABRE_PCICTRL); |
| } |
| |
| static void apb_init(struct pci_bus *sabre_bus) |
| { |
| struct pci_dev *pdev; |
| |
| list_for_each_entry(pdev, &sabre_bus->devices, bus_list) { |
| if (pdev->vendor == PCI_VENDOR_ID_SUN && |
| pdev->device == PCI_DEVICE_ID_SUN_SIMBA) { |
| u16 word16; |
| |
| pci_read_config_word(pdev, PCI_COMMAND, &word16); |
| word16 |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | |
| PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | |
| PCI_COMMAND_IO; |
| pci_write_config_word(pdev, PCI_COMMAND, word16); |
| |
| /* Status register bits are "write 1 to clear". */ |
| pci_write_config_word(pdev, PCI_STATUS, 0xffff); |
| pci_write_config_word(pdev, PCI_SEC_STATUS, 0xffff); |
| |
| /* Use a primary/seconday latency timer value |
| * of 64. |
| */ |
| pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); |
| pci_write_config_byte(pdev, PCI_SEC_LATENCY_TIMER, 64); |
| |
| /* Enable reporting/forwarding of master aborts, |
| * parity, and SERR. |
| */ |
| pci_write_config_byte(pdev, PCI_BRIDGE_CONTROL, |
| (PCI_BRIDGE_CTL_PARITY | |
| PCI_BRIDGE_CTL_SERR | |
| PCI_BRIDGE_CTL_MASTER_ABORT)); |
| } |
| } |
| } |
| |
| static void __init sabre_scan_bus(struct pci_pbm_info *pbm, |
| struct device *parent) |
| { |
| static int once; |
| |
| /* The APB bridge speaks to the Sabre host PCI bridge |
| * at 66Mhz, but the front side of APB runs at 33Mhz |
| * for both segments. |
| * |
| * Hummingbird systems do not use APB, so they run |
| * at 66MHZ. |
| */ |
| if (hummingbird_p) |
| pbm->is_66mhz_capable = 1; |
| else |
| pbm->is_66mhz_capable = 0; |
| |
| /* This driver has not been verified to handle |
| * multiple SABREs yet, so trap this. |
| * |
| * Also note that the SABRE host bridge is hardwired |
| * to live at bus 0. |
| */ |
| if (once != 0) { |
| printk(KERN_ERR PFX "Multiple controllers unsupported.\n"); |
| return; |
| } |
| once++; |
| |
| pbm->pci_bus = pci_scan_one_pbm(pbm, parent); |
| if (!pbm->pci_bus) |
| return; |
| |
| sabre_root_bus = pbm->pci_bus; |
| |
| apb_init(pbm->pci_bus); |
| |
| sabre_register_error_handlers(pbm); |
| } |
| |
| static void __init sabre_pbm_init(struct pci_pbm_info *pbm, |
| struct of_device *op) |
| { |
| psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE); |
| pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR; |
| pbm->pci_afar = pbm->controller_regs + SABRE_PIOAFAR; |
| pbm->pci_csr = pbm->controller_regs + SABRE_PCICTRL; |
| sabre_scan_bus(pbm, &op->dev); |
| } |
| |
| static int __devinit sabre_probe(struct of_device *op, |
| const struct of_device_id *match) |
| { |
| const struct linux_prom64_registers *pr_regs; |
| struct device_node *dp = op->node; |
| struct pci_pbm_info *pbm; |
| u32 upa_portid, dma_mask; |
| struct iommu *iommu; |
| int tsbsize, err; |
| const u32 *vdma; |
| u64 clear_irq; |
| |
| hummingbird_p = (match->data != NULL); |
| if (!hummingbird_p) { |
| struct device_node *cpu_dp; |
| |
| /* Of course, Sun has to encode things a thousand |
| * different ways, inconsistently. |
| */ |
| for_each_node_by_type(cpu_dp, "cpu") { |
| if (!strcmp(cpu_dp->name, "SUNW,UltraSPARC-IIe")) |
| hummingbird_p = 1; |
| } |
| } |
| |
| err = -ENOMEM; |
| pbm = kzalloc(sizeof(*pbm), GFP_KERNEL); |
| if (!pbm) { |
| printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n"); |
| goto out_err; |
| } |
| |
| iommu = kzalloc(sizeof(*iommu), GFP_KERNEL); |
| if (!iommu) { |
| printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n"); |
| goto out_free_controller; |
| } |
| |
| pbm->iommu = iommu; |
| |
| upa_portid = of_getintprop_default(dp, "upa-portid", 0xff); |
| |
| pbm->portid = upa_portid; |
| |
| /* |
| * Map in SABRE register set and report the presence of this SABRE. |
| */ |
| |
| pr_regs = of_get_property(dp, "reg", NULL); |
| err = -ENODEV; |
| if (!pr_regs) { |
| printk(KERN_ERR PFX "No reg property\n"); |
| goto out_free_iommu; |
| } |
| |
| /* |
| * First REG in property is base of entire SABRE register space. |
| */ |
| pbm->controller_regs = pr_regs[0].phys_addr; |
| |
| /* Clear interrupts */ |
| |
| /* PCI first */ |
| for (clear_irq = SABRE_ICLR_A_SLOT0; clear_irq < SABRE_ICLR_B_SLOT0 + 0x80; clear_irq += 8) |
| upa_writeq(0x0UL, pbm->controller_regs + clear_irq); |
| |
| /* Then OBIO */ |
| for (clear_irq = SABRE_ICLR_SCSI; clear_irq < SABRE_ICLR_SCSI + 0x80; clear_irq += 8) |
| upa_writeq(0x0UL, pbm->controller_regs + clear_irq); |
| |
| /* Error interrupts are enabled later after the bus scan. */ |
| upa_writeq((SABRE_PCICTRL_MRLEN | SABRE_PCICTRL_SERR | |
| SABRE_PCICTRL_ARBPARK | SABRE_PCICTRL_AEN), |
| pbm->controller_regs + SABRE_PCICTRL); |
| |
| /* Now map in PCI config space for entire SABRE. */ |
| pbm->config_space = pbm->controller_regs + SABRE_CONFIGSPACE; |
| |
| vdma = of_get_property(dp, "virtual-dma", NULL); |
| if (!vdma) { |
| printk(KERN_ERR PFX "No virtual-dma property\n"); |
| goto out_free_iommu; |
| } |
| |
| dma_mask = vdma[0]; |
| switch(vdma[1]) { |
| case 0x20000000: |
| dma_mask |= 0x1fffffff; |
| tsbsize = 64; |
| break; |
| case 0x40000000: |
| dma_mask |= 0x3fffffff; |
| tsbsize = 128; |
| break; |
| |
| case 0x80000000: |
| dma_mask |= 0x7fffffff; |
| tsbsize = 128; |
| break; |
| default: |
| printk(KERN_ERR PFX "Strange virtual-dma size.\n"); |
| goto out_free_iommu; |
| } |
| |
| err = psycho_iommu_init(pbm, tsbsize, vdma[0], dma_mask, SABRE_WRSYNC); |
| if (err) |
| goto out_free_iommu; |
| |
| /* |
| * Look for APB underneath. |
| */ |
| sabre_pbm_init(pbm, op); |
| |
| pbm->next = pci_pbm_root; |
| pci_pbm_root = pbm; |
| |
| dev_set_drvdata(&op->dev, pbm); |
| |
| return 0; |
| |
| out_free_iommu: |
| kfree(pbm->iommu); |
| |
| out_free_controller: |
| kfree(pbm); |
| |
| out_err: |
| return err; |
| } |
| |
| static struct of_device_id __initdata sabre_match[] = { |
| { |
| .name = "pci", |
| .compatible = "pci108e,a001", |
| .data = (void *) 1, |
| }, |
| { |
| .name = "pci", |
| .compatible = "pci108e,a000", |
| }, |
| {}, |
| }; |
| |
| static struct of_platform_driver sabre_driver = { |
| .name = DRIVER_NAME, |
| .match_table = sabre_match, |
| .probe = sabre_probe, |
| }; |
| |
| static int __init sabre_init(void) |
| { |
| return of_register_driver(&sabre_driver, &of_bus_type); |
| } |
| |
| subsys_initcall(sabre_init); |