blob: 12d378f84ad2d717cd8cab0cccceef548e0fbe4a [file] [log] [blame]
/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
*
* Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.handhelds.org/projects/rx3715.html
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/h1940.h>
#include <plat/nand.h>
#include <mach/fb.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
static struct map_desc rx3715_iodesc[] __initdata = {
/* dump ISA space somewhere unused */
{
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = __phys_to_pfn(S3C2410_CS3),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = __phys_to_pfn(S3C2410_CS3),
.length = SZ_1M,
.type = MT_DEVICE,
},
};
static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = {
[0] = {
.name = "fclk",
.divisor = 0,
.min_baud = 0,
.max_baud = 0,
}
};
static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
.clocks = rx3715_serial_clocks,
.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x00,
.clocks = rx3715_serial_clocks,
.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
},
/* IR port */
[2] = {
.hwport = 2,
.uart_flags = UPF_CONS_FLOW,
.ucon = 0x3c5,
.ulcon = 0x43,
.ufcon = 0x51,
.clocks = rx3715_serial_clocks,
.clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
}
};
/* framebuffer lcd controller information */
static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
.lcdcon5 = S3C2410_LCDCON5_INVVLINE |
S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_HWSWP,
.type = S3C2410_LCDCON1_TFT,
.width = 240,
.height = 320,
.pixclock = 260000,
.xres = 240,
.yres = 320,
.bpp = 16,
.left_margin = 36,
.right_margin = 36,
.hsync_len = 8,
.upper_margin = 6,
.lower_margin = 7,
.vsync_len = 3,
};
static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
.displays = &rx3715_lcdcfg,
.num_displays = 1,
.default_display = 0,
.lpcsel = 0xf82,
.gpccon = 0xaa955699,
.gpccon_mask = 0xffc003cc,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
.gpdcon = 0xaa95aaa1,
.gpdcon_mask = 0xffc0fff0,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
};
static struct mtd_partition rx3715_nand_part[] = {
[0] = {
.name = "Whole Flash",
.offset = 0,
.size = MTDPART_SIZ_FULL,
.mask_flags = MTD_WRITEABLE,
}
};
static struct s3c2410_nand_set rx3715_nand_sets[] = {
[0] = {
.name = "Internal",
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(rx3715_nand_part),
.partitions = rx3715_nand_part,
},
};
static struct s3c2410_platform_nand rx3715_nand_info = {
.tacls = 25,
.twrph0 = 50,
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx3715_nand_sets),
.sets = rx3715_nand_sets,
};
static struct platform_device *rx3715_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_nand,
};
static void __init rx3715_map_io(void)
{
s3c_device_nand.dev.platform_data = &rx3715_nand_info;
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
}
static void __init rx3715_init_irq(void)
{
s3c24xx_init_irq();
}
static void __init rx3715_init_machine(void)
{
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
s3c2410_pm_init();
s3c24xx_fb_set_platdata(&rx3715_fb_info);
platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
}
MACHINE_START(RX3715, "IPAQ-RX3715")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = rx3715_map_io,
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
.timer = &s3c24xx_timer,
MACHINE_END