| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle |
| * Copyright (C) 1996 by Paul M. Antoine |
| * Copyright (C) 1999 Silicon Graphics |
| * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 2000 MIPS Technologies, Inc. |
| */ |
| #ifndef _ASM_SYSTEM_H |
| #define _ASM_SYSTEM_H |
| |
| #include <linux/config.h> |
| #include <linux/types.h> |
| |
| #include <asm/addrspace.h> |
| #include <asm/cpu-features.h> |
| #include <asm/dsp.h> |
| #include <asm/ptrace.h> |
| #include <asm/war.h> |
| #include <asm/interrupt.h> |
| |
| /* |
| * read_barrier_depends - Flush all pending reads that subsequents reads |
| * depend on. |
| * |
| * No data-dependent reads from memory-like regions are ever reordered |
| * over this barrier. All reads preceding this primitive are guaranteed |
| * to access memory (but not necessarily other CPUs' caches) before any |
| * reads following this primitive that depend on the data return by |
| * any of the preceding reads. This primitive is much lighter weight than |
| * rmb() on most CPUs, and is never heavier weight than is |
| * rmb(). |
| * |
| * These ordering constraints are respected by both the local CPU |
| * and the compiler. |
| * |
| * Ordering is not guaranteed by anything other than these primitives, |
| * not even by data dependencies. See the documentation for |
| * memory_barrier() for examples and URLs to more information. |
| * |
| * For example, the following code would force ordering (the initial |
| * value of "a" is zero, "b" is one, and "p" is "&a"): |
| * |
| * <programlisting> |
| * CPU 0 CPU 1 |
| * |
| * b = 2; |
| * memory_barrier(); |
| * p = &b; q = p; |
| * read_barrier_depends(); |
| * d = *q; |
| * </programlisting> |
| * |
| * because the read of "*q" depends on the read of "p" and these |
| * two reads are separated by a read_barrier_depends(). However, |
| * the following code, with the same initial values for "a" and "b": |
| * |
| * <programlisting> |
| * CPU 0 CPU 1 |
| * |
| * a = 2; |
| * memory_barrier(); |
| * b = 3; y = b; |
| * read_barrier_depends(); |
| * x = a; |
| * </programlisting> |
| * |
| * does not enforce ordering, since there is no data dependency between |
| * the read of "a" and the read of "b". Therefore, on some CPUs, such |
| * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() |
| * in cases like this where there are no data dependencies. |
| */ |
| |
| #define read_barrier_depends() do { } while(0) |
| |
| #ifdef CONFIG_CPU_HAS_SYNC |
| #define __sync() \ |
| __asm__ __volatile__( \ |
| ".set push\n\t" \ |
| ".set noreorder\n\t" \ |
| ".set mips2\n\t" \ |
| "sync\n\t" \ |
| ".set pop" \ |
| : /* no output */ \ |
| : /* no input */ \ |
| : "memory") |
| #else |
| #define __sync() do { } while(0) |
| #endif |
| |
| #define __fast_iob() \ |
| __asm__ __volatile__( \ |
| ".set push\n\t" \ |
| ".set noreorder\n\t" \ |
| "lw $0,%0\n\t" \ |
| "nop\n\t" \ |
| ".set pop" \ |
| : /* no output */ \ |
| : "m" (*(int *)CKSEG1) \ |
| : "memory") |
| |
| #define fast_wmb() __sync() |
| #define fast_rmb() __sync() |
| #define fast_mb() __sync() |
| #define fast_iob() \ |
| do { \ |
| __sync(); \ |
| __fast_iob(); \ |
| } while (0) |
| |
| #ifdef CONFIG_CPU_HAS_WB |
| |
| #include <asm/wbflush.h> |
| |
| #define wmb() fast_wmb() |
| #define rmb() fast_rmb() |
| #define mb() wbflush() |
| #define iob() wbflush() |
| |
| #else /* !CONFIG_CPU_HAS_WB */ |
| |
| #define wmb() fast_wmb() |
| #define rmb() fast_rmb() |
| #define mb() fast_mb() |
| #define iob() fast_iob() |
| |
| #endif /* !CONFIG_CPU_HAS_WB */ |
| |
| #ifdef CONFIG_SMP |
| #define smp_mb() mb() |
| #define smp_rmb() rmb() |
| #define smp_wmb() wmb() |
| #define smp_read_barrier_depends() read_barrier_depends() |
| #else |
| #define smp_mb() barrier() |
| #define smp_rmb() barrier() |
| #define smp_wmb() barrier() |
| #define smp_read_barrier_depends() do { } while(0) |
| #endif |
| |
| #define set_mb(var, value) \ |
| do { var = value; mb(); } while (0) |
| |
| #define set_wmb(var, value) \ |
| do { var = value; wmb(); } while (0) |
| |
| /* |
| * switch_to(n) should switch tasks to task nr n, first |
| * checking that n isn't the current task, in which case it does nothing. |
| */ |
| extern asmlinkage void *resume(void *last, void *next, void *next_ti); |
| |
| struct task_struct; |
| |
| #define switch_to(prev,next,last) \ |
| do { \ |
| if (cpu_has_dsp) \ |
| __save_dsp(prev); \ |
| (last) = resume(prev, next, next->thread_info); \ |
| if (cpu_has_dsp) \ |
| __restore_dsp(current); \ |
| } while(0) |
| |
| /* |
| * On SMP systems, when the scheduler does migration-cost autodetection, |
| * it needs a way to flush as much of the CPU's caches as possible. |
| * |
| * TODO: fill this in! |
| */ |
| static inline void sched_cacheflush(void) |
| { |
| } |
| |
| static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) |
| { |
| __u32 retval; |
| |
| if (cpu_has_llsc && R10000_LLSC_WAR) { |
| unsigned long dummy; |
| |
| __asm__ __volatile__( |
| " .set mips3 \n" |
| "1: ll %0, %3 # xchg_u32 \n" |
| " .set mips0 \n" |
| " move %2, %z4 \n" |
| " .set mips3 \n" |
| " sc %2, %1 \n" |
| " beqzl %2, 1b \n" |
| #ifdef CONFIG_SMP |
| " sync \n" |
| #endif |
| " .set mips0 \n" |
| : "=&r" (retval), "=m" (*m), "=&r" (dummy) |
| : "R" (*m), "Jr" (val) |
| : "memory"); |
| } else if (cpu_has_llsc) { |
| unsigned long dummy; |
| |
| __asm__ __volatile__( |
| " .set mips3 \n" |
| "1: ll %0, %3 # xchg_u32 \n" |
| " .set mips0 \n" |
| " move %2, %z4 \n" |
| " .set mips3 \n" |
| " sc %2, %1 \n" |
| " beqz %2, 1b \n" |
| #ifdef CONFIG_SMP |
| " sync \n" |
| #endif |
| " .set mips0 \n" |
| : "=&r" (retval), "=m" (*m), "=&r" (dummy) |
| : "R" (*m), "Jr" (val) |
| : "memory"); |
| } else { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| retval = *m; |
| *m = val; |
| local_irq_restore(flags); /* implies memory barrier */ |
| } |
| |
| return retval; |
| } |
| |
| #ifdef CONFIG_64BIT |
| static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) |
| { |
| __u64 retval; |
| |
| if (cpu_has_llsc && R10000_LLSC_WAR) { |
| unsigned long dummy; |
| |
| __asm__ __volatile__( |
| " .set mips3 \n" |
| "1: lld %0, %3 # xchg_u64 \n" |
| " move %2, %z4 \n" |
| " scd %2, %1 \n" |
| " beqzl %2, 1b \n" |
| #ifdef CONFIG_SMP |
| " sync \n" |
| #endif |
| " .set mips0 \n" |
| : "=&r" (retval), "=m" (*m), "=&r" (dummy) |
| : "R" (*m), "Jr" (val) |
| : "memory"); |
| } else if (cpu_has_llsc) { |
| unsigned long dummy; |
| |
| __asm__ __volatile__( |
| " .set mips3 \n" |
| "1: lld %0, %3 # xchg_u64 \n" |
| " move %2, %z4 \n" |
| " scd %2, %1 \n" |
| " beqz %2, 1b \n" |
| #ifdef CONFIG_SMP |
| " sync \n" |
| #endif |
| " .set mips0 \n" |
| : "=&r" (retval), "=m" (*m), "=&r" (dummy) |
| : "R" (*m), "Jr" (val) |
| : "memory"); |
| } else { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| retval = *m; |
| *m = val; |
| local_irq_restore(flags); /* implies memory barrier */ |
| } |
| |
| return retval; |
| } |
| #else |
| extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 val); |
| #define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels |
| #endif |
| |
| /* This function doesn't exist, so you'll get a linker error |
| if something tries to do an invalid xchg(). */ |
| extern void __xchg_called_with_bad_pointer(void); |
| |
| static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) |
| { |
| switch (size) { |
| case 4: |
| return __xchg_u32(ptr, x); |
| case 8: |
| return __xchg_u64(ptr, x); |
| } |
| __xchg_called_with_bad_pointer(); |
| return x; |
| } |
| |
| #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) |
| #define tas(ptr) (xchg((ptr),1)) |
| |
| #define __HAVE_ARCH_CMPXCHG 1 |
| |
| static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, |
| unsigned long new) |
| { |
| __u32 retval; |
| |
| if (cpu_has_llsc && R10000_LLSC_WAR) { |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noat \n" |
| " .set mips3 \n" |
| "1: ll %0, %2 # __cmpxchg_u32 \n" |
| " bne %0, %z3, 2f \n" |
| " .set mips0 \n" |
| " move $1, %z4 \n" |
| " .set mips3 \n" |
| " sc $1, %1 \n" |
| " beqzl $1, 1b \n" |
| #ifdef CONFIG_SMP |
| " sync \n" |
| #endif |
| "2: \n" |
| " .set pop \n" |
| : "=&r" (retval), "=m" (*m) |
| : "R" (*m), "Jr" (old), "Jr" (new) |
| : "memory"); |
| } else if (cpu_has_llsc) { |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noat \n" |
| " .set mips3 \n" |
| "1: ll %0, %2 # __cmpxchg_u32 \n" |
| " bne %0, %z3, 2f \n" |
| " .set mips0 \n" |
| " move $1, %z4 \n" |
| " .set mips3 \n" |
| " sc $1, %1 \n" |
| " beqz $1, 1b \n" |
| #ifdef CONFIG_SMP |
| " sync \n" |
| #endif |
| "2: \n" |
| " .set pop \n" |
| : "=&r" (retval), "=m" (*m) |
| : "R" (*m), "Jr" (old), "Jr" (new) |
| : "memory"); |
| } else { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| retval = *m; |
| if (retval == old) |
| *m = new; |
| local_irq_restore(flags); /* implies memory barrier */ |
| } |
| |
| return retval; |
| } |
| |
| #ifdef CONFIG_64BIT |
| static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old, |
| unsigned long new) |
| { |
| __u64 retval; |
| |
| if (cpu_has_llsc) { |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noat \n" |
| " .set mips3 \n" |
| "1: lld %0, %2 # __cmpxchg_u64 \n" |
| " bne %0, %z3, 2f \n" |
| " move $1, %z4 \n" |
| " scd $1, %1 \n" |
| " beqzl $1, 1b \n" |
| #ifdef CONFIG_SMP |
| " sync \n" |
| #endif |
| "2: \n" |
| " .set pop \n" |
| : "=&r" (retval), "=m" (*m) |
| : "R" (*m), "Jr" (old), "Jr" (new) |
| : "memory"); |
| } else if (cpu_has_llsc) { |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noat \n" |
| " .set mips3 \n" |
| "1: lld %0, %2 # __cmpxchg_u64 \n" |
| " bne %0, %z3, 2f \n" |
| " move $1, %z4 \n" |
| " scd $1, %1 \n" |
| " beqz $1, 1b \n" |
| #ifdef CONFIG_SMP |
| " sync \n" |
| #endif |
| "2: \n" |
| " .set pop \n" |
| : "=&r" (retval), "=m" (*m) |
| : "R" (*m), "Jr" (old), "Jr" (new) |
| : "memory"); |
| } else { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| retval = *m; |
| if (retval == old) |
| *m = new; |
| local_irq_restore(flags); /* implies memory barrier */ |
| } |
| |
| return retval; |
| } |
| #else |
| extern unsigned long __cmpxchg_u64_unsupported_on_32bit_kernels( |
| volatile int * m, unsigned long old, unsigned long new); |
| #define __cmpxchg_u64 __cmpxchg_u64_unsupported_on_32bit_kernels |
| #endif |
| |
| /* This function doesn't exist, so you'll get a linker error |
| if something tries to do an invalid cmpxchg(). */ |
| extern void __cmpxchg_called_with_bad_pointer(void); |
| |
| static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old, |
| unsigned long new, int size) |
| { |
| switch (size) { |
| case 4: |
| return __cmpxchg_u32(ptr, old, new); |
| case 8: |
| return __cmpxchg_u64(ptr, old, new); |
| } |
| __cmpxchg_called_with_bad_pointer(); |
| return old; |
| } |
| |
| #define cmpxchg(ptr,old,new) ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(old), (unsigned long)(new),sizeof(*(ptr)))) |
| |
| extern void set_handler (unsigned long offset, void *addr, unsigned long len); |
| extern void set_uncached_handler (unsigned long offset, void *addr, unsigned long len); |
| extern void *set_vi_handler (int n, void *addr); |
| extern void *set_vi_srs_handler (int n, void *addr, int regset); |
| extern void *set_except_vector(int n, void *addr); |
| extern void per_cpu_trap_init(void); |
| |
| extern NORET_TYPE void die(const char *, struct pt_regs *); |
| |
| static inline void die_if_kernel(const char *str, struct pt_regs *regs) |
| { |
| if (unlikely(!user_mode(regs))) |
| die(str, regs); |
| } |
| |
| extern int stop_a_enabled; |
| |
| /* |
| * See include/asm-ia64/system.h; prevents deadlock on SMP |
| * systems. |
| */ |
| #define __ARCH_WANT_UNLOCKED_CTXSW |
| |
| #define arch_align_stack(x) (x) |
| |
| #endif /* _ASM_SYSTEM_H */ |