arch/sh/kernel/cpu/irq/intc2.c - maze/linux - Git at Google

 /*
  * Interrupt handling for INTC2-based IRQ.
  *
  * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
  * Copyright (C) 2005, 2006 Paul Mundt (lethal@linux-sh.org)
  *
  * May be copied or modified under the terms of the GNU General Public
  * License.  See linux/COPYING for more information.
  *
  * These are the "new Hitachi style" interrupts, as present on the
  * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780.
  */

 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/machvec.h>

 struct intc2_data {
 	unsigned char msk_offset;
 	unsigned char msk_shift;

 	int (*clear_irq) (int);
 };

 static struct intc2_data intc2_data[NR_INTC2_IRQS];

 static void enable_intc2_irq(unsigned int irq);
 static void disable_intc2_irq(unsigned int irq);

 /* shutdown is same as "disable" */
 #define shutdown_intc2_irq disable_intc2_irq

 static void mask_and_ack_intc2(unsigned int);
 static void end_intc2_irq(unsigned int irq);

 static unsigned int startup_intc2_irq(unsigned int irq)
 {
 	enable_intc2_irq(irq);
 	return 0; /* never anything pending */
 }

 static struct hw_interrupt_type intc2_irq_type = {
 	.typename	= "INTC2-IRQ",
 	.startup	= startup_intc2_irq,
 	.shutdown	= shutdown_intc2_irq,
 	.enable		= enable_intc2_irq,
 	.disable	= disable_intc2_irq,
 	.ack		= mask_and_ack_intc2,
 	.end		= end_intc2_irq
 };

 static void disable_intc2_irq(unsigned int irq)
 {
 	int irq_offset = irq - INTC2_FIRST_IRQ;
 	int msk_shift, msk_offset;

 	/* Sanity check */
 	if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
 		return;

 	msk_shift = intc2_data[irq_offset].msk_shift;
 	msk_offset = intc2_data[irq_offset].msk_offset;

 	ctrl_outl(1 << msk_shift,
 		  INTC2_BASE + INTC2_INTMSK_OFFSET + msk_offset);
 }

 static void enable_intc2_irq(unsigned int irq)
 {
 	int irq_offset = irq - INTC2_FIRST_IRQ;
 	int msk_shift, msk_offset;

 	/* Sanity check */
 	if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
 		return;

 	msk_shift = intc2_data[irq_offset].msk_shift;
 	msk_offset = intc2_data[irq_offset].msk_offset;

 	ctrl_outl(1 << msk_shift,
 		  INTC2_BASE + INTC2_INTMSKCLR_OFFSET + msk_offset);
 }

 static void mask_and_ack_intc2(unsigned int irq)
 {
 	disable_intc2_irq(irq);
 }

 static void end_intc2_irq(unsigned int irq)
 {
 	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
 		enable_intc2_irq(irq);

 	if (unlikely(intc2_data[irq - INTC2_FIRST_IRQ].clear_irq))
 		intc2_data[irq - INTC2_FIRST_IRQ].clear_irq(irq);
 }

 /*
  * Setup an INTC2 style interrupt.
  * NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
  * allowing the use of the numbers straight out of the datasheet.
  * For example:
  *    PIO1 which is INTPRI00[19,16] and INTMSK00[13]
  * would be:               ^     ^             ^  ^
  *                         |     |             |  |
  *    make_intc2_irq(84,   0,   16,            0, 13);
  */
 void make_intc2_irq(unsigned int irq,
 		    unsigned int ipr_offset, unsigned int ipr_shift,
 		    unsigned int msk_offset, unsigned int msk_shift,
 		    unsigned int priority)
 {
 	int irq_offset = irq - INTC2_FIRST_IRQ;
 	unsigned int flags;
 	unsigned long ipr;

 	if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
 		return;

 	disable_irq_nosync(irq);

 	/* Fill the data we need */
 	intc2_data[irq_offset].msk_offset = msk_offset;
 	intc2_data[irq_offset].msk_shift  = msk_shift;
 	intc2_data[irq_offset].clear_irq = NULL;

 	/* Set the priority level */
 	local_irq_save(flags);

 	ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);
 	ipr &= ~(0xf << ipr_shift);
 	ipr |= priority << ipr_shift;
 	ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);

 	local_irq_restore(flags);

 	irq_desc[irq].chip = &intc2_irq_type;

 	disable_intc2_irq(irq);
 }

 static struct intc2_init {
 	unsigned short irq;
 	unsigned char ipr_offset, ipr_shift;
 	unsigned char msk_offset, msk_shift;
 	unsigned char priority;
 } intc2_init_data[]  __initdata = {
 #if defined(CONFIG_CPU_SUBTYPE_ST40)
 	{64,  0,  0, 0,  0, 13},	/* PCI serr */
 	{65,  0,  4, 0,  1, 13},	/* PCI err */
 	{66,  0,  4, 0,  2, 13},	/* PCI ad */
 	{67,  0,  4, 0,  3, 13},	/* PCI pwd down */
 	{72,  0,  8, 0,  5, 13},	/* DMAC INT0 */
 	{73,  0,  8, 0,  6, 13},	/* DMAC INT1 */
 	{74,  0,  8, 0,  7, 13},	/* DMAC INT2 */
 	{75,  0,  8, 0,  8, 13},	/* DMAC INT3 */
 	{76,  0,  8, 0,  9, 13},	/* DMAC INT4 */
 	{78,  0,  8, 0, 11, 13},	/* DMAC ERR */
 	{80,  0, 12, 0, 12, 13},	/* PIO0 */
 	{84,  0, 16, 0, 13, 13},	/* PIO1 */
 	{88,  0, 20, 0, 14, 13},	/* PIO2 */
 	{112, 4,  0, 4,  0, 13},	/* Mailbox */
  #ifdef CONFIG_CPU_SUBTYPE_ST40GX1
 	{116, 4,  4, 4,  4, 13},	/* SSC0 */
 	{120, 4,  8, 4,  8, 13},	/* IR Blaster */
 	{124, 4, 12, 4, 12, 13},	/* USB host */
 	{128, 4, 16, 4, 16, 13},	/* Video processor BLITTER */
 	{132, 4, 20, 4, 20, 13},	/* UART0 */
 	{134, 4, 20, 4, 22, 13},	/* UART2 */
 	{136, 4, 24, 4, 24, 13},	/* IO_PIO0 */
 	{140, 4, 28, 4, 28, 13},	/* EMPI */
 	{144, 8,  0, 8,  0, 13},	/* MAFE */
 	{148, 8,  4, 8,  4, 13},	/* PWM */
 	{152, 8,  8, 8,  8, 13},	/* SSC1 */
 	{156, 8, 12, 8, 12, 13},	/* IO_PIO1 */
 	{160, 8, 16, 8, 16, 13},	/* USB target */
 	{164, 8, 20, 8, 20, 13},	/* UART1 */
 	{168, 8, 24, 8, 24, 13},	/* Teletext */
 	{172, 8, 28, 8, 28, 13},	/* VideoSync VTG */
 	{173, 8, 28, 8, 29, 13},	/* VideoSync DVP0 */
 	{174, 8, 28, 8, 30, 13},	/* VideoSync DVP1 */
 #endif
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
 /*
  * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0
  */
 	/* INTPRIO0 | INTMSK0 */
 	{48,  0, 28, 0, 31,  3},	/* IRQ 4 */
 	{49,  0, 24, 0, 30,  3},	/* IRQ 3 */
 	{50,  0, 20, 0, 29,  3},	/* IRQ 2 */
 	{51,  0, 16, 0, 28,  3},	/* IRQ 1 */
 	/* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */
 	/* INTPRIO4 | INTMSK0 */
 	{56,  4, 28, 0, 25,  3},	/* HCAN2_CHAN0 */
 	{57,  4, 24, 0, 24,  3},	/* HCAN2_CHAN1 */
 	{58,  4, 20, 0, 23,  3},	/* I2S_CHAN0   */
 	{59,  4, 16, 0, 22,  3},	/* I2S_CHAN1   */
 	{60,  4, 12, 0, 21,  3},	/* AC97_CHAN0  */
 	{61,  4,  8, 0, 20,  3},	/* AC97_CHAN1  */
 	{62,  4,  4, 0, 19,  3},	/* I2C_CHAN0   */
 	{63,  4,  0, 0, 18,  3},	/* I2C_CHAN1   */
 	/* INTPRIO8 | INTMSK0 */
 	{52,  8, 16, 0, 11,  3},	/* SCIF0_ERI_IRQ */
 	{53,  8, 16, 0, 10,  3},	/* SCIF0_RXI_IRQ */
 	{54,  8, 16, 0,  9,  3},	/* SCIF0_BRI_IRQ */
 	{55,  8, 16, 0,  8,  3},	/* SCIF0_TXI_IRQ */
 	{64,  8, 28, 0, 17,  3},	/* USBHI_IRQ */
 	{65,  8, 24, 0, 16,  3},	/* LCDC      */
 	/* 66, 67 unused */
 	{68,  8, 20, 0, 14, 13},	/* DMABRGI0_IRQ */
 	{69,  8, 20, 0, 13, 13},	/* DMABRGI1_IRQ */
 	{70,  8, 20, 0, 12, 13},	/* DMABRGI2_IRQ */
 	/* 71 unused */
 	{72,  8, 12, 0,  7,  3},	/* SCIF1_ERI_IRQ */
 	{73,  8, 12, 0,  6,  3},	/* SCIF1_RXI_IRQ */
 	{74,  8, 12, 0,  5,  3},	/* SCIF1_BRI_IRQ */
 	{75,  8, 12, 0,  4,  3},	/* SCIF1_TXI_IRQ */
 	{76,  8,  8, 0,  3,  3},	/* SCIF2_ERI_IRQ */
 	{77,  8,  8, 0,  2,  3},	/* SCIF2_RXI_IRQ */
 	{78,  8,  8, 0,  1,  3},	/* SCIF2_BRI_IRQ */
 	{79,  8,  8, 0,  0,  3},	/* SCIF2_TXI_IRQ */
 	/*          | INTMSK4 */
 	{80,  8,  4, 4, 23,  3},	/* SIM_ERI */
 	{81,  8,  4, 4, 22,  3},	/* SIM_RXI */
 	{82,  8,  4, 4, 21,  3},	/* SIM_TXI */
 	{83,  8,  4, 4, 20,  3},	/* SIM_TEI */
 	{84,  8,  0, 4, 19,  3},	/* HSPII */
 	/* INTPRIOC | INTMSK4 */
 	/* 85-87 unused/reserved */
 	{88, 12, 20, 4, 18,  3},	/* MMCI0 */
 	{89, 12, 20, 4, 17,  3},	/* MMCI1 */
 	{90, 12, 20, 4, 16,  3},	/* MMCI2 */
 	{91, 12, 20, 4, 15,  3},	/* MMCI3 */
 	{92, 12, 12, 4,  6,  3},	/* MFI (unsure, bug? in my 7760 manual*/
 	/* 93-107 reserved/undocumented */
 	{108,12,  4, 4,  1,  3},	/* ADC  */
 	{109,12,  0, 4,  0,  3},	/* CMTI */
 	/* 110-111 reserved/unused */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 	{ TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2},
 #ifdef CONFIG_SH_RTC
 	{ RTC_IRQ, 4, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY },
 #endif
 	{ SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
 	{ SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
 	{ SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
 	{ SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },

 	{ SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
 	{ SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
 	{ SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
 	{ SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },

 	{ PCIC0_IRQ, 0x10,  8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY },
 	{ PCIC1_IRQ, 0x10,  0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY },
 	{ PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY },
 	{ PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY },
 	{ PCIC4_IRQ, 0x14,  8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY },
 #endif
 };

 void __init init_IRQ_intc2(void)
 {
 	int i;

 	for (i = 0; i < ARRAY_SIZE(intc2_init_data); i++) {
 		struct intc2_init *p = intc2_init_data + i;
 		make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift,
 			       p-> msk_offset, p->msk_shift, p->priority);
 	}
 }

 /* Adds a termination callback to the interrupt */
 void intc2_add_clear_irq(int irq, int (*fn)(int))
 {
 	if (unlikely(irq < INTC2_FIRST_IRQ))
 		return;

 	intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn;
 }
	/*
	* Interrupt handling for INTC2-based IRQ.
	*
	* Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
	* Copyright (C) 2005, 2006 Paul Mundt (lethal@linux-sh.org)
	*
	* May be copied or modified under the terms of the GNU General Public
	* License. See linux/COPYING for more information.
	*
	* These are the "new Hitachi style" interrupts, as present on the
	* Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780.
	*/

	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/irq.h>
	#include <asm/system.h>
	#include <asm/io.h>
	#include <asm/machvec.h>

	struct intc2_data {
	unsigned char msk_offset;
	unsigned char msk_shift;

	int (*clear_irq) (int);
	};

	static struct intc2_data intc2_data[NR_INTC2_IRQS];

	static void enable_intc2_irq(unsigned int irq);
	static void disable_intc2_irq(unsigned int irq);

	/* shutdown is same as "disable" */
	#define shutdown_intc2_irq disable_intc2_irq

	static void mask_and_ack_intc2(unsigned int);
	static void end_intc2_irq(unsigned int irq);

	static unsigned int startup_intc2_irq(unsigned int irq)
	{
	enable_intc2_irq(irq);
	return 0; /* never anything pending */
	}

	static struct hw_interrupt_type intc2_irq_type = {
	.typename = "INTC2-IRQ",
	.startup = startup_intc2_irq,
	.shutdown = shutdown_intc2_irq,
	.enable = enable_intc2_irq,
	.disable = disable_intc2_irq,
	.ack = mask_and_ack_intc2,
	.end = end_intc2_irq
	};

	static void disable_intc2_irq(unsigned int irq)
	{
	int irq_offset = irq - INTC2_FIRST_IRQ;
	int msk_shift, msk_offset;

	/* Sanity check */
	if (unlikely(irq_offset < 0 \|\| irq_offset >= NR_INTC2_IRQS))
	return;

	msk_shift = intc2_data[irq_offset].msk_shift;
	msk_offset = intc2_data[irq_offset].msk_offset;

	ctrl_outl(1 << msk_shift,
	INTC2_BASE + INTC2_INTMSK_OFFSET + msk_offset);
	}

	static void enable_intc2_irq(unsigned int irq)
	{
	int irq_offset = irq - INTC2_FIRST_IRQ;
	int msk_shift, msk_offset;

	/* Sanity check */
	if (unlikely(irq_offset < 0 \|\| irq_offset >= NR_INTC2_IRQS))
	return;

	msk_shift = intc2_data[irq_offset].msk_shift;
	msk_offset = intc2_data[irq_offset].msk_offset;

	ctrl_outl(1 << msk_shift,
	INTC2_BASE + INTC2_INTMSKCLR_OFFSET + msk_offset);
	}

	static void mask_and_ack_intc2(unsigned int irq)
	{
	disable_intc2_irq(irq);
	}

	static void end_intc2_irq(unsigned int irq)
	{
	if (!(irq_desc[irq].status & (IRQ_DISABLED\|IRQ_INPROGRESS)))
	enable_intc2_irq(irq);

	if (unlikely(intc2_data[irq - INTC2_FIRST_IRQ].clear_irq))
	intc2_data[irq - INTC2_FIRST_IRQ].clear_irq(irq);
	}

	/*
	* Setup an INTC2 style interrupt.
	* NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
	* allowing the use of the numbers straight out of the datasheet.
	* For example:
	* PIO1 which is INTPRI00[19,16] and INTMSK00[13]
	* would be: ^ ^ ^ ^
	* \| \| \| \|
	* make_intc2_irq(84, 0, 16, 0, 13);
	*/
	void make_intc2_irq(unsigned int irq,
	unsigned int ipr_offset, unsigned int ipr_shift,
	unsigned int msk_offset, unsigned int msk_shift,
	unsigned int priority)
	{
	int irq_offset = irq - INTC2_FIRST_IRQ;
	unsigned int flags;
	unsigned long ipr;

	if (unlikely(irq_offset < 0 \|\| irq_offset >= NR_INTC2_IRQS))
	return;

	disable_irq_nosync(irq);

	/* Fill the data we need */
	intc2_data[irq_offset].msk_offset = msk_offset;
	intc2_data[irq_offset].msk_shift = msk_shift;
	intc2_data[irq_offset].clear_irq = NULL;

	/* Set the priority level */
	local_irq_save(flags);

	ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);
	ipr &= ~(0xf << ipr_shift);
	ipr \|= priority << ipr_shift;
	ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);

	local_irq_restore(flags);

	irq_desc[irq].chip = &intc2_irq_type;

	disable_intc2_irq(irq);
	}

	static struct intc2_init {
	unsigned short irq;
	unsigned char ipr_offset, ipr_shift;
	unsigned char msk_offset, msk_shift;
	unsigned char priority;
	} intc2_init_data[] __initdata = {
	#if defined(CONFIG_CPU_SUBTYPE_ST40)
	{64, 0, 0, 0, 0, 13}, /* PCI serr */
	{65, 0, 4, 0, 1, 13}, /* PCI err */
	{66, 0, 4, 0, 2, 13}, /* PCI ad */
	{67, 0, 4, 0, 3, 13}, /* PCI pwd down */
	{72, 0, 8, 0, 5, 13}, /* DMAC INT0 */
	{73, 0, 8, 0, 6, 13}, /* DMAC INT1 */
	{74, 0, 8, 0, 7, 13}, /* DMAC INT2 */
	{75, 0, 8, 0, 8, 13}, /* DMAC INT3 */
	{76, 0, 8, 0, 9, 13}, /* DMAC INT4 */
	{78, 0, 8, 0, 11, 13}, /* DMAC ERR */
	{80, 0, 12, 0, 12, 13}, /* PIO0 */
	{84, 0, 16, 0, 13, 13}, /* PIO1 */
	{88, 0, 20, 0, 14, 13}, /* PIO2 */
	{112, 4, 0, 4, 0, 13}, /* Mailbox */
	#ifdef CONFIG_CPU_SUBTYPE_ST40GX1
	{116, 4, 4, 4, 4, 13}, /* SSC0 */
	{120, 4, 8, 4, 8, 13}, /* IR Blaster */
	{124, 4, 12, 4, 12, 13}, /* USB host */
	{128, 4, 16, 4, 16, 13}, /* Video processor BLITTER */
	{132, 4, 20, 4, 20, 13}, /* UART0 */
	{134, 4, 20, 4, 22, 13}, /* UART2 */
	{136, 4, 24, 4, 24, 13}, /* IO_PIO0 */
	{140, 4, 28, 4, 28, 13}, /* EMPI */
	{144, 8, 0, 8, 0, 13}, /* MAFE */
	{148, 8, 4, 8, 4, 13}, /* PWM */
	{152, 8, 8, 8, 8, 13}, /* SSC1 */
	{156, 8, 12, 8, 12, 13}, /* IO_PIO1 */
	{160, 8, 16, 8, 16, 13}, /* USB target */
	{164, 8, 20, 8, 20, 13}, /* UART1 */
	{168, 8, 24, 8, 24, 13}, /* Teletext */
	{172, 8, 28, 8, 28, 13}, /* VideoSync VTG */
	{173, 8, 28, 8, 29, 13}, /* VideoSync DVP0 */
	{174, 8, 28, 8, 30, 13}, /* VideoSync DVP1 */
	#endif
	#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
	/*
	* SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0
	*/
	/* INTPRIO0 \| INTMSK0 */
	{48, 0, 28, 0, 31, 3}, /* IRQ 4 */
	{49, 0, 24, 0, 30, 3}, /* IRQ 3 */
	{50, 0, 20, 0, 29, 3}, /* IRQ 2 */
	{51, 0, 16, 0, 28, 3}, /* IRQ 1 */
	/* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */
	/* INTPRIO4 \| INTMSK0 */
	{56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */
	{57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */
	{58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */
	{59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */
	{60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */
	{61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */
	{62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */
	{63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */
	/* INTPRIO8 \| INTMSK0 */
	{52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */
	{53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */
	{54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */
	{55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */
	{64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */
	{65, 8, 24, 0, 16, 3}, /* LCDC */
	/* 66, 67 unused */
	{68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */
	{69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */
	{70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */
	/* 71 unused */
	{72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */
	{73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */
	{74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */
	{75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */
	{76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */
	{77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */
	{78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */
	{79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */
	/* \| INTMSK4 */
	{80, 8, 4, 4, 23, 3}, /* SIM_ERI */
	{81, 8, 4, 4, 22, 3}, /* SIM_RXI */
	{82, 8, 4, 4, 21, 3}, /* SIM_TXI */
	{83, 8, 4, 4, 20, 3}, /* SIM_TEI */
	{84, 8, 0, 4, 19, 3}, /* HSPII */
	/* INTPRIOC \| INTMSK4 */
	/* 85-87 unused/reserved */
	{88, 12, 20, 4, 18, 3}, /* MMCI0 */
	{89, 12, 20, 4, 17, 3}, /* MMCI1 */
	{90, 12, 20, 4, 16, 3}, /* MMCI2 */
	{91, 12, 20, 4, 15, 3}, /* MMCI3 */
	{92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/
	/* 93-107 reserved/undocumented */
	{108,12, 4, 4, 1, 3}, /* ADC */
	{109,12, 0, 4, 0, 3}, /* CMTI */
	/* 110-111 reserved/unused */
	#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
	{ TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2},
	#ifdef CONFIG_SH_RTC
	{ RTC_IRQ, 4, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY },
	#endif
	{ SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
	{ SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
	{ SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
	{ SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },

	{ SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
	{ SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
	{ SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
	{ SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },

	{ PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY },
	{ PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY },
	{ PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY },
	{ PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY },
	{ PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY },
	#endif
	};

	void __init init_IRQ_intc2(void)
	{
	int i;

	for (i = 0; i < ARRAY_SIZE(intc2_init_data); i++) {
	struct intc2_init *p = intc2_init_data + i;
	make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift,
	p-> msk_offset, p->msk_shift, p->priority);
	}
	}

	/* Adds a termination callback to the interrupt */
	void intc2_add_clear_irq(int irq, int (*fn)(int))
	{
	if (unlikely(irq < INTC2_FIRST_IRQ))
	return;

	intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn;
	}