| /* Various workarounds for chipset bugs. |
| This code runs very early and can't use the regular PCI subsystem |
| The entries are keyed to PCI bridges which usually identify chipsets |
| uniquely. |
| This is only for whole classes of chipsets with specific problems which |
| need early invasive action (e.g. before the timers are initialized). |
| Most PCI device specific workarounds can be done later and should be |
| in standard PCI quirks |
| Mainboard specific bugs should be handled by DMI entries. |
| CPU specific bugs in setup.c */ |
| |
| #include <linux/pci.h> |
| #include <linux/acpi.h> |
| #include <linux/pci_ids.h> |
| #include <asm/pci-direct.h> |
| #include <asm/dma.h> |
| #include <asm/io_apic.h> |
| #include <asm/apic.h> |
| |
| #ifdef CONFIG_GART_IOMMU |
| #include <asm/gart.h> |
| #endif |
| |
| static void __init fix_hypertransport_config(int num, int slot, int func) |
| { |
| u32 htcfg; |
| /* |
| * we found a hypertransport bus |
| * make sure that we are broadcasting |
| * interrupts to all cpus on the ht bus |
| * if we're using extended apic ids |
| */ |
| htcfg = read_pci_config(num, slot, func, 0x68); |
| if (htcfg & (1 << 18)) { |
| printk(KERN_INFO "Detected use of extended apic ids " |
| "on hypertransport bus\n"); |
| if ((htcfg & (1 << 17)) == 0) { |
| printk(KERN_INFO "Enabling hypertransport extended " |
| "apic interrupt broadcast\n"); |
| printk(KERN_INFO "Note this is a bios bug, " |
| "please contact your hw vendor\n"); |
| htcfg |= (1 << 17); |
| write_pci_config(num, slot, func, 0x68, htcfg); |
| } |
| } |
| |
| |
| } |
| |
| static void __init via_bugs(int num, int slot, int func) |
| { |
| #ifdef CONFIG_GART_IOMMU |
| if ((max_pfn > MAX_DMA32_PFN || force_iommu) && |
| !gart_iommu_aperture_allowed) { |
| printk(KERN_INFO |
| "Looks like a VIA chipset. Disabling IOMMU." |
| " Override with iommu=allowed\n"); |
| gart_iommu_aperture_disabled = 1; |
| } |
| #endif |
| } |
| |
| #ifdef CONFIG_ACPI |
| #ifdef CONFIG_X86_IO_APIC |
| |
| static int __init nvidia_hpet_check(struct acpi_table_header *header) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_X86_IO_APIC */ |
| #endif /* CONFIG_ACPI */ |
| |
| static void __init nvidia_bugs(int num, int slot, int func) |
| { |
| #ifdef CONFIG_ACPI |
| #ifdef CONFIG_X86_IO_APIC |
| /* |
| * All timer overrides on Nvidia are |
| * wrong unless HPET is enabled. |
| * Unfortunately that's not true on many Asus boards. |
| * We don't know yet how to detect this automatically, but |
| * at least allow a command line override. |
| */ |
| if (acpi_use_timer_override) |
| return; |
| |
| if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) { |
| acpi_skip_timer_override = 1; |
| printk(KERN_INFO "Nvidia board " |
| "detected. Ignoring ACPI " |
| "timer override.\n"); |
| printk(KERN_INFO "If you got timer trouble " |
| "try acpi_use_timer_override\n"); |
| } |
| #endif |
| #endif |
| /* RED-PEN skip them on mptables too? */ |
| |
| } |
| |
| #define QFLAG_APPLY_ONCE 0x1 |
| #define QFLAG_APPLIED 0x2 |
| #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) |
| struct chipset { |
| u32 vendor; |
| u32 device; |
| u32 class; |
| u32 class_mask; |
| u32 flags; |
| void (*f)(int num, int slot, int func); |
| }; |
| |
| static struct chipset early_qrk[] __initdata = { |
| { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, |
| PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs }, |
| { PCI_VENDOR_ID_VIA, PCI_ANY_ID, |
| PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs }, |
| { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, |
| PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config }, |
| {} |
| }; |
| |
| /** |
| * check_dev_quirk - apply early quirks to a given PCI device |
| * @num: bus number |
| * @slot: slot number |
| * @func: PCI function |
| * |
| * Check the vendor & device ID against the early quirks table. |
| * |
| * If the device is single function, let early_quirks() know so we don't |
| * poke at this device again. |
| */ |
| static int __init check_dev_quirk(int num, int slot, int func) |
| { |
| u16 class; |
| u16 vendor; |
| u16 device; |
| u8 type; |
| int i; |
| |
| class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE); |
| |
| if (class == 0xffff) |
| return -1; /* no class, treat as single function */ |
| |
| vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID); |
| |
| device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID); |
| |
| for (i = 0; early_qrk[i].f != NULL; i++) { |
| if (((early_qrk[i].vendor == PCI_ANY_ID) || |
| (early_qrk[i].vendor == vendor)) && |
| ((early_qrk[i].device == PCI_ANY_ID) || |
| (early_qrk[i].device == device)) && |
| (!((early_qrk[i].class ^ class) & |
| early_qrk[i].class_mask))) { |
| if ((early_qrk[i].flags & |
| QFLAG_DONE) != QFLAG_DONE) |
| early_qrk[i].f(num, slot, func); |
| early_qrk[i].flags |= QFLAG_APPLIED; |
| } |
| } |
| |
| type = read_pci_config_byte(num, slot, func, |
| PCI_HEADER_TYPE); |
| if (!(type & 0x80)) |
| return -1; |
| |
| return 0; |
| } |
| |
| void __init early_quirks(void) |
| { |
| int num, slot, func; |
| |
| if (!early_pci_allowed()) |
| return; |
| |
| /* Poor man's PCI discovery */ |
| for (num = 0; num < 32; num++) |
| for (slot = 0; slot < 32; slot++) |
| for (func = 0; func < 8; func++) { |
| /* Only probe function 0 on single fn devices */ |
| if (check_dev_quirk(num, slot, func)) |
| break; |
| } |
| } |