| config HOSTAP |
| tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)" |
| depends on NET_RADIO |
| select IEEE80211 |
| select IEEE80211_CRYPT_WEP |
| ---help--- |
| Shared driver code for IEEE 802.11b wireless cards based on |
| Intersil Prism2/2.5/3 chipset. This driver supports so called |
| Host AP mode that allows the card to act as an IEEE 802.11 |
| access point. |
| |
| See <http://hostap.epitest.fi/> for more information about the |
| Host AP driver configuration and tools. This site includes |
| information and tools (hostapd and wpa_supplicant) for WPA/WPA2 |
| support. |
| |
| This option includes the base Host AP driver code that is shared by |
| different hardware models. You will also need to enable support for |
| PLX/PCI/CS version of the driver to actually use the driver. |
| |
| The driver can be compiled as a module and it will be called |
| "hostap.ko". |
| |
| config HOSTAP_FIRMWARE |
| bool "Support downloading firmware images with Host AP driver" |
| depends on HOSTAP |
| ---help--- |
| Configure Host AP driver to include support for firmware image |
| download. Current version supports only downloading to volatile, i.e., |
| RAM memory. Flash upgrade is not yet supported. |
| |
| Firmware image downloading needs user space tool, prism2_srec. It is |
| available from http://hostap.epitest.fi/. |
| |
| config HOSTAP_PLX |
| tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors" |
| depends on PCI && HOSTAP |
| ---help--- |
| Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based |
| PCI adaptors. |
| |
| "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this |
| driver and its help text includes more information about the Host AP |
| driver. |
| |
| The driver can be compiled as a module and will be named |
| "hostap_plx.ko". |
| |
| config HOSTAP_PCI |
| tristate "Host AP driver for Prism2.5 PCI adaptors" |
| depends on PCI && HOSTAP |
| ---help--- |
| Host AP driver's version for Prism2.5 PCI adaptors. |
| |
| "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this |
| driver and its help text includes more information about the Host AP |
| driver. |
| |
| The driver can be compiled as a module and will be named |
| "hostap_pci.ko". |
| |
| config HOSTAP_CS |
| tristate "Host AP driver for Prism2/2.5/3 PC Cards" |
| depends on PCMCIA!=n && HOSTAP |
| ---help--- |
| Host AP driver's version for Prism2/2.5/3 PC Cards. |
| |
| "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this |
| driver and its help text includes more information about the Host AP |
| driver. |
| |
| The driver can be compiled as a module and will be named |
| "hostap_cs.ko". |
