blob: d00a80334095beb2a5fd372697b01f1c7a4c3410 [file] [log] [blame]
/******************************************************************************
*
* Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <net/ieee80211_radiotap.h>
#include <net/lib80211.h>
#include <net/mac80211.h>
#include <asm/div64.h>
#define DRV_NAME "iwl3945"
#include "iwl-fh.h"
#include "iwl-3945-fh.h"
#include "iwl-commands.h"
#include "iwl-sta.h"
#include "iwl-3945.h"
#include "iwl-helpers.h"
#include "iwl-core.h"
#include "iwl-dev.h"
/*
* module name, copyright, version, etc.
*/
#define DRV_DESCRIPTION \
"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
#ifdef CONFIG_IWLWIFI_DEBUG
#define VD "d"
#else
#define VD
#endif
#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
#define VS "s"
#else
#define VS
#endif
#define IWL39_VERSION "1.2.26k" VD VS
#define DRV_COPYRIGHT "Copyright(c) 2003-2009 Intel Corporation"
#define DRV_AUTHOR "<ilw@linux.intel.com>"
#define DRV_VERSION IWL39_VERSION
MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");
/* module parameters */
struct iwl_mod_params iwl3945_mod_params = {
.num_of_queues = IWL39_NUM_QUEUES, /* Not used */
.sw_crypto = 1,
.restart_fw = 1,
/* the rest are 0 by default */
};
/**
* iwl3945_get_antenna_flags - Get antenna flags for RXON command
* @priv: eeprom and antenna fields are used to determine antenna flags
*
* priv->eeprom39 is used to determine if antenna AUX/MAIN are reversed
* iwl3945_mod_params.antenna specifies the antenna diversity mode:
*
* IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
* IWL_ANTENNA_MAIN - Force MAIN antenna
* IWL_ANTENNA_AUX - Force AUX antenna
*/
__le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv)
{
struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
switch (iwl3945_mod_params.antenna) {
case IWL_ANTENNA_DIVERSITY:
return 0;
case IWL_ANTENNA_MAIN:
if (eeprom->antenna_switch_type)
return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
case IWL_ANTENNA_AUX:
if (eeprom->antenna_switch_type)
return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
}
/* bad antenna selector value */
IWL_ERR(priv, "Bad antenna selector value (0x%x)\n",
iwl3945_mod_params.antenna);
return 0; /* "diversity" is default if error */
}
static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
struct ieee80211_key_conf *keyconf,
u8 sta_id)
{
unsigned long flags;
__le16 key_flags = 0;
int ret;
key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
if (sta_id == priv->hw_params.bcast_sta_id)
key_flags |= STA_KEY_MULTICAST_MSK;
keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
keyconf->hw_key_idx = keyconf->keyidx;
key_flags &= ~STA_KEY_FLG_INVALID;
spin_lock_irqsave(&priv->sta_lock, flags);
priv->stations[sta_id].keyinfo.alg = keyconf->alg;
priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
keyconf->keylen);
memcpy(priv->stations[sta_id].sta.key.key, keyconf->key,
keyconf->keylen);
if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
== STA_KEY_FLG_NO_ENC)
priv->stations[sta_id].sta.key.key_offset =
iwl_get_free_ucode_key_index(priv);
/* else, we are overriding an existing key => no need to allocated room
* in uCode. */
WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
"no space for a new key");
priv->stations[sta_id].sta.key.key_flags = key_flags;
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n");
ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
spin_unlock_irqrestore(&priv->sta_lock, flags);
return ret;
}
static int iwl3945_set_tkip_dynamic_key_info(struct iwl_priv *priv,
struct ieee80211_key_conf *keyconf,
u8 sta_id)
{
return -EOPNOTSUPP;
}
static int iwl3945_set_wep_dynamic_key_info(struct iwl_priv *priv,
struct ieee80211_key_conf *keyconf,
u8 sta_id)
{
return -EOPNOTSUPP;
}
static int iwl3945_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id)
{
unsigned long flags;
spin_lock_irqsave(&priv->sta_lock, flags);
memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key));
memset(&priv->stations[sta_id].sta.key, 0,
sizeof(struct iwl4965_keyinfo));
priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
spin_unlock_irqrestore(&priv->sta_lock, flags);
IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n");
iwl_send_add_sta(priv, &priv->stations[sta_id].sta, 0);
return 0;
}
static int iwl3945_set_dynamic_key(struct iwl_priv *priv,
struct ieee80211_key_conf *keyconf, u8 sta_id)
{
int ret = 0;
keyconf->hw_key_idx = HW_KEY_DYNAMIC;
switch (keyconf->alg) {
case ALG_CCMP:
ret = iwl3945_set_ccmp_dynamic_key_info(priv, keyconf, sta_id);
break;
case ALG_TKIP:
ret = iwl3945_set_tkip_dynamic_key_info(priv, keyconf, sta_id);
break;
case ALG_WEP:
ret = iwl3945_set_wep_dynamic_key_info(priv, keyconf, sta_id);
break;
default:
IWL_ERR(priv, "Unknown alg: %s alg = %d\n", __func__, keyconf->alg);
ret = -EINVAL;
}
IWL_DEBUG_WEP(priv, "Set dynamic key: alg= %d len=%d idx=%d sta=%d ret=%d\n",
keyconf->alg, keyconf->keylen, keyconf->keyidx,
sta_id, ret);
return ret;
}
static int iwl3945_remove_static_key(struct iwl_priv *priv)
{
int ret = -EOPNOTSUPP;
return ret;
}
static int iwl3945_set_static_key(struct iwl_priv *priv,
struct ieee80211_key_conf *key)
{
if (key->alg == ALG_WEP)
return -EOPNOTSUPP;
IWL_ERR(priv, "Static key invalid: alg %d\n", key->alg);
return -EINVAL;
}
static void iwl3945_clear_free_frames(struct iwl_priv *priv)
{
struct list_head *element;
IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
priv->frames_count);
while (!list_empty(&priv->free_frames)) {
element = priv->free_frames.next;
list_del(element);
kfree(list_entry(element, struct iwl3945_frame, list));
priv->frames_count--;
}
if (priv->frames_count) {
IWL_WARN(priv, "%d frames still in use. Did we lose one?\n",
priv->frames_count);
priv->frames_count = 0;
}
}
static struct iwl3945_frame *iwl3945_get_free_frame(struct iwl_priv *priv)
{
struct iwl3945_frame *frame;
struct list_head *element;
if (list_empty(&priv->free_frames)) {
frame = kzalloc(sizeof(*frame), GFP_KERNEL);
if (!frame) {
IWL_ERR(priv, "Could not allocate frame!\n");
return NULL;
}
priv->frames_count++;
return frame;
}
element = priv->free_frames.next;
list_del(element);
return list_entry(element, struct iwl3945_frame, list);
}
static void iwl3945_free_frame(struct iwl_priv *priv, struct iwl3945_frame *frame)
{
memset(frame, 0, sizeof(*frame));
list_add(&frame->list, &priv->free_frames);
}
unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
struct ieee80211_hdr *hdr,
int left)
{
if (!iwl_is_associated(priv) || !priv->ibss_beacon ||
((priv->iw_mode != NL80211_IFTYPE_ADHOC) &&
(priv->iw_mode != NL80211_IFTYPE_AP)))
return 0;
if (priv->ibss_beacon->len > left)
return 0;
memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
return priv->ibss_beacon->len;
}
static int iwl3945_send_beacon_cmd(struct iwl_priv *priv)
{
struct iwl3945_frame *frame;
unsigned int frame_size;
int rc;
u8 rate;
frame = iwl3945_get_free_frame(priv);
if (!frame) {
IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
"command.\n");
return -ENOMEM;
}
rate = iwl_rate_get_lowest_plcp(priv);
frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate);
rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
&frame->u.cmd[0]);
iwl3945_free_frame(priv, frame);
return rc;
}
static void iwl3945_unset_hw_params(struct iwl_priv *priv)
{
if (priv->shared_virt)
pci_free_consistent(priv->pci_dev,
sizeof(struct iwl3945_shared),
priv->shared_virt,
priv->shared_phys);
}
static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
struct ieee80211_tx_info *info,
struct iwl_device_cmd *cmd,
struct sk_buff *skb_frag,
int sta_id)
{
struct iwl3945_tx_cmd *tx = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo;
switch (keyinfo->alg) {
case ALG_CCMP:
tx->sec_ctl = TX_CMD_SEC_CCM;
memcpy(tx->key, keyinfo->key, keyinfo->keylen);
IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
break;
case ALG_TKIP:
break;
case ALG_WEP:
tx->sec_ctl = TX_CMD_SEC_WEP |
(info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
if (keyinfo->keylen == 13)
tx->sec_ctl |= TX_CMD_SEC_KEY128;
memcpy(&tx->key[3], keyinfo->key, keyinfo->keylen);
IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
"with key %d\n", info->control.hw_key->hw_key_idx);
break;
default:
IWL_ERR(priv, "Unknown encode alg %d\n", keyinfo->alg);
break;
}
}
/*
* handle build REPLY_TX command notification.
*/
static void iwl3945_build_tx_cmd_basic(struct iwl_priv *priv,
struct iwl_device_cmd *cmd,
struct ieee80211_tx_info *info,
struct ieee80211_hdr *hdr, u8 std_id)
{
struct iwl3945_tx_cmd *tx = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
__le32 tx_flags = tx->tx_flags;
__le16 fc = hdr->frame_control;
u8 rc_flags = info->control.rates[0].flags;
tx->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
tx_flags |= TX_CMD_FLG_ACK_MSK;
if (ieee80211_is_mgmt(fc))
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
if (ieee80211_is_probe_resp(fc) &&
!(le16_to_cpu(hdr->seq_ctrl) & 0xf))
tx_flags |= TX_CMD_FLG_TSF_MSK;
} else {
tx_flags &= (~TX_CMD_FLG_ACK_MSK);
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
}
tx->sta_id = std_id;
if (ieee80211_has_morefrags(fc))
tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
if (ieee80211_is_data_qos(fc)) {
u8 *qc = ieee80211_get_qos_ctl(hdr);
tx->tid_tspec = qc[0] & 0xf;
tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
} else {
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
}
if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
tx_flags |= TX_CMD_FLG_RTS_MSK;
tx_flags &= ~TX_CMD_FLG_CTS_MSK;
} else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
tx_flags &= ~TX_CMD_FLG_RTS_MSK;
tx_flags |= TX_CMD_FLG_CTS_MSK;
}
if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK))
tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
if (ieee80211_is_mgmt(fc)) {
if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
tx->timeout.pm_frame_timeout = cpu_to_le16(3);
else
tx->timeout.pm_frame_timeout = cpu_to_le16(2);
} else {
tx->timeout.pm_frame_timeout = 0;
#ifdef CONFIG_IWLWIFI_LEDS
priv->rxtxpackets += le16_to_cpu(cmd->cmd.tx.len);
#endif
}
tx->driver_txop = 0;
tx->tx_flags = tx_flags;
tx->next_frame_len = 0;
}
/*
* start REPLY_TX command process
*/
static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct iwl3945_tx_cmd *tx;
struct iwl_tx_queue *txq = NULL;
struct iwl_queue *q = NULL;
struct iwl_device_cmd *out_cmd;
struct iwl_cmd_meta *out_meta;
dma_addr_t phys_addr;
dma_addr_t txcmd_phys;
int txq_id = skb_get_queue_mapping(skb);
u16 len, idx, len_org, hdr_len; /* TODO: len_org is not used */
u8 id;
u8 unicast;
u8 sta_id;
u8 tid = 0;
u16 seq_number = 0;
__le16 fc;
u8 wait_write_ptr = 0;
u8 *qc = NULL;
unsigned long flags;
int rc;
spin_lock_irqsave(&priv->lock, flags);
if (iwl_is_rfkill(priv)) {
IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n");
goto drop_unlock;
}
if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) {
IWL_ERR(priv, "ERROR: No TX rate available.\n");
goto drop_unlock;
}
unicast = !is_multicast_ether_addr(hdr->addr1);
id = 0;
fc = hdr->frame_control;
#ifdef CONFIG_IWLWIFI_DEBUG
if (ieee80211_is_auth(fc))
IWL_DEBUG_TX(priv, "Sending AUTH frame\n");
else if (ieee80211_is_assoc_req(fc))
IWL_DEBUG_TX(priv, "Sending ASSOC frame\n");
else if (ieee80211_is_reassoc_req(fc))
IWL_DEBUG_TX(priv, "Sending REASSOC frame\n");
#endif
/* drop all non-injected data frame if we are not associated */
if (ieee80211_is_data(fc) &&
!(info->flags & IEEE80211_TX_CTL_INJECTED) &&
(!iwl_is_associated(priv) ||
((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id))) {
IWL_DEBUG_DROP(priv, "Dropping - !iwl_is_associated\n");
goto drop_unlock;
}
spin_unlock_irqrestore(&priv->lock, flags);
hdr_len = ieee80211_hdrlen(fc);
/* Find (or create) index into station table for destination station */
if (info->flags & IEEE80211_TX_CTL_INJECTED)
sta_id = priv->hw_params.bcast_sta_id;
else
sta_id = iwl_get_sta_id(priv, hdr);
if (sta_id == IWL_INVALID_STATION) {
IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
hdr->addr1);
goto drop;
}
IWL_DEBUG_RATE(priv, "station Id %d\n", sta_id);
if (ieee80211_is_data_qos(fc)) {
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
if (unlikely(tid >= MAX_TID_COUNT))
goto drop;
seq_number = priv->stations[sta_id].tid[tid].seq_number &
IEEE80211_SCTL_SEQ;
hdr->seq_ctrl = cpu_to_le16(seq_number) |
(hdr->seq_ctrl &
cpu_to_le16(IEEE80211_SCTL_FRAG));
seq_number += 0x10;
}
/* Descriptor for chosen Tx queue */
txq = &priv->txq[txq_id];
q = &txq->q;
spin_lock_irqsave(&priv->lock, flags);
idx = get_cmd_index(q, q->write_ptr, 0);
/* Set up driver data for this TFD */
memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
txq->txb[q->write_ptr].skb[0] = skb;
/* Init first empty entry in queue's array of Tx/cmd buffers */
out_cmd = txq->cmd[idx];
out_meta = &txq->meta[idx];
tx = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload;
memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
memset(tx, 0, sizeof(*tx));
/*
* Set up the Tx-command (not MAC!) header.
* Store the chosen Tx queue and TFD index within the sequence field;
* after Tx, uCode's Tx response will return this value so driver can
* locate the frame within the tx queue and do post-tx processing.
*/
out_cmd->hdr.cmd = REPLY_TX;
out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
INDEX_TO_SEQ(q->write_ptr)));
/* Copy MAC header from skb into command buffer */
memcpy(tx->hdr, hdr, hdr_len);
if (info->control.hw_key)
iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
/* TODO need this for burst mode later on */
iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
/* set is_hcca to 0; it probably will never be implemented */
iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
/* Total # bytes to be transmitted */
len = (u16)skb->len;
tx->len = cpu_to_le16(len);
iwl_dbg_log_tx_data_frame(priv, len, hdr);
iwl_update_stats(priv, true, fc, len);
tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
if (!ieee80211_has_morefrags(hdr->frame_control)) {
txq->need_update = 1;
if (qc)
priv->stations[sta_id].tid[tid].seq_number = seq_number;
} else {
wait_write_ptr = 1;
txq->need_update = 0;
}
IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
le16_to_cpu(out_cmd->hdr.sequence));
IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags));
iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
ieee80211_hdrlen(fc));
/*
* Use the first empty entry in this queue's command buffer array
* to contain the Tx command and MAC header concatenated together
* (payload data will be in another buffer).
* Size of this varies, due to varying MAC header length.
* If end is not dword aligned, we'll have 2 extra bytes at the end
* of the MAC header (device reads on dword boundaries).
* We'll tell device about this padding later.
*/
len = sizeof(struct iwl3945_tx_cmd) +
sizeof(struct iwl_cmd_header) + hdr_len;
len_org = len;
len = (len + 3) & ~3;
if (len_org != len)
len_org = 1;
else
len_org = 0;
/* Physical address of this Tx command's header (not MAC header!),
* within command buffer array. */
txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr,
len, PCI_DMA_TODEVICE);
/* we do not map meta data ... so we can safely access address to
* provide to unmap command*/
pci_unmap_addr_set(out_meta, mapping, txcmd_phys);
pci_unmap_len_set(out_meta, len, len);
/* Add buffer containing Tx command and MAC(!) header to TFD's
* first entry */
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
txcmd_phys, len, 1, 0);
/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
len = skb->len - hdr_len;
if (len) {
phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
len, PCI_DMA_TODEVICE);
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
phys_addr, len,
0, U32_PAD(len));
}
/* Tell device the write index *just past* this latest filled TFD */
q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
rc = iwl_txq_update_write_ptr(priv, txq);
spin_unlock_irqrestore(&priv->lock, flags);
if (rc)
return rc;
if ((iwl_queue_space(q) < q->high_mark)
&& priv->mac80211_registered) {
if (wait_write_ptr) {
spin_lock_irqsave(&priv->lock, flags);
txq->need_update = 1;
iwl_txq_update_write_ptr(priv, txq);
spin_unlock_irqrestore(&priv->lock, flags);
}
iwl_stop_queue(priv, skb_get_queue_mapping(skb));
}
return 0;
drop_unlock:
spin_unlock_irqrestore(&priv->lock, flags);
drop:
return -1;
}
#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
#include "iwl-spectrum.h"
#define BEACON_TIME_MASK_LOW 0x00FFFFFF
#define BEACON_TIME_MASK_HIGH 0xFF000000
#define TIME_UNIT 1024
/*
* extended beacon time format
* time in usec will be changed into a 32-bit value in 8:24 format
* the high 1 byte is the beacon counts
* the lower 3 bytes is the time in usec within one beacon interval
*/
static u32 iwl3945_usecs_to_beacons(u32 usec, u32 beacon_interval)
{
u32 quot;
u32 rem;
u32 interval = beacon_interval * 1024;
if (!interval || !usec)
return 0;
quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24);
rem = (usec % interval) & BEACON_TIME_MASK_LOW;
return (quot << 24) + rem;
}
/* base is usually what we get from ucode with each received frame,
* the same as HW timer counter counting down
*/
static __le32 iwl3945_add_beacon_time(u32 base, u32 addon, u32 beacon_interval)
{
u32 base_low = base & BEACON_TIME_MASK_LOW;
u32 addon_low = addon & BEACON_TIME_MASK_LOW;
u32 interval = beacon_interval * TIME_UNIT;
u32 res = (base & BEACON_TIME_MASK_HIGH) +
(addon & BEACON_TIME_MASK_HIGH);
if (base_low > addon_low)
res += base_low - addon_low;
else if (base_low < addon_low) {
res += interval + base_low - addon_low;
res += (1 << 24);
} else
res += (1 << 24);
return cpu_to_le32(res);
}
static int iwl3945_get_measurement(struct iwl_priv *priv,
struct ieee80211_measurement_params *params,
u8 type)
{
struct iwl_spectrum_cmd spectrum;
struct iwl_rx_packet *res;
struct iwl_host_cmd cmd = {
.id = REPLY_SPECTRUM_MEASUREMENT_CMD,
.data = (void *)&spectrum,
.flags = CMD_WANT_SKB,
};
u32 add_time = le64_to_cpu(params->start_time);
int rc;
int spectrum_resp_status;
int duration = le16_to_cpu(params->duration);
if (iwl_is_associated(priv))
add_time =
iwl3945_usecs_to_beacons(
le64_to_cpu(params->start_time) - priv->last_tsf,
le16_to_cpu(priv->rxon_timing.beacon_interval));
memset(&spectrum, 0, sizeof(spectrum));
spectrum.channel_count = cpu_to_le16(1);
spectrum.flags =
RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
cmd.len = sizeof(spectrum);
spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
if (iwl_is_associated(priv))
spectrum.start_time =
iwl3945_add_beacon_time(priv->last_beacon_time,
add_time,
le16_to_cpu(priv->rxon_timing.beacon_interval));
else
spectrum.start_time = 0;
spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
spectrum.channels[0].channel = params->channel;
spectrum.channels[0].type = type;
if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)
spectrum.flags |= RXON_FLG_BAND_24G_MSK |
RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
rc = iwl_send_cmd_sync(priv, &cmd);
if (rc)
return rc;
res = (struct iwl_rx_packet *)cmd.reply_skb->data;
if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n");
rc = -EIO;
}
spectrum_resp_status = le16_to_cpu(res->u.spectrum.status);
switch (spectrum_resp_status) {
case 0: /* Command will be handled */
if (res->u.spectrum.id != 0xff) {
IWL_DEBUG_INFO(priv, "Replaced existing measurement: %d\n",
res->u.spectrum.id);
priv->measurement_status &= ~MEASUREMENT_READY;
}
priv->measurement_status |= MEASUREMENT_ACTIVE;
rc = 0;
break;
case 1: /* Command will not be handled */
rc = -EAGAIN;
break;
}
dev_kfree_skb_any(cmd.reply_skb);
return rc;
}
#endif
static void iwl3945_rx_reply_alive(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl_alive_resp *palive;
struct delayed_work *pwork;
palive = &pkt->u.alive_frame;
IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
"0x%01X 0x%01X\n",
palive->is_valid, palive->ver_type,
palive->ver_subtype);
if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
memcpy(&priv->card_alive_init, &pkt->u.alive_frame,
sizeof(struct iwl_alive_resp));
pwork = &priv->init_alive_start;
} else {
IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
memcpy(&priv->card_alive, &pkt->u.alive_frame,
sizeof(struct iwl_alive_resp));
pwork = &priv->alive_start;
iwl3945_disable_events(priv);
}
/* We delay the ALIVE response by 5ms to
* give the HW RF Kill time to activate... */
if (palive->is_valid == UCODE_VALID_OK)
queue_delayed_work(priv->workqueue, pwork,
msecs_to_jiffies(5));
else
IWL_WARN(priv, "uCode did not respond OK.\n");
}
static void iwl3945_rx_reply_add_sta(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
#endif
IWL_DEBUG_RX(priv, "Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
return;
}
static void iwl3945_bg_beacon_update(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, beacon_update);
struct sk_buff *beacon;
/* Pull updated AP beacon from mac80211. will fail if not in AP mode */
beacon = ieee80211_beacon_get(priv->hw, priv->vif);
if (!beacon) {
IWL_ERR(priv, "update beacon failed\n");
return;
}
mutex_lock(&priv->mutex);
/* new beacon skb is allocated every time; dispose previous.*/
if (priv->ibss_beacon)
dev_kfree_skb(priv->ibss_beacon);
priv->ibss_beacon = beacon;
mutex_unlock(&priv->mutex);
iwl3945_send_beacon_cmd(priv);
}
static void iwl3945_rx_beacon_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
u8 rate = beacon->beacon_notify_hdr.rate;
IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
"tsf %d %d rate %d\n",
le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
beacon->beacon_notify_hdr.failure_frame,
le32_to_cpu(beacon->ibss_mgr_status),
le32_to_cpu(beacon->high_tsf),
le32_to_cpu(beacon->low_tsf), rate);
#endif
if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
(!test_bit(STATUS_EXIT_PENDING, &priv->status)))
queue_work(priv->workqueue, &priv->beacon_update);
}
/* Handle notification from uCode that card's power state is changing
* due to software, hardware, or critical temperature RFKILL */
static void iwl3945_rx_card_state_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
unsigned long status = priv->status;
IWL_WARN(priv, "Card state received: HW:%s SW:%s\n",
(flags & HW_CARD_DISABLED) ? "Kill" : "On",
(flags & SW_CARD_DISABLED) ? "Kill" : "On");
iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
if (flags & HW_CARD_DISABLED)
set_bit(STATUS_RF_KILL_HW, &priv->status);
else
clear_bit(STATUS_RF_KILL_HW, &priv->status);
iwl_scan_cancel(priv);
if ((test_bit(STATUS_RF_KILL_HW, &status) !=
test_bit(STATUS_RF_KILL_HW, &priv->status)))
wiphy_rfkill_set_hw_state(priv->hw->wiphy,
test_bit(STATUS_RF_KILL_HW, &priv->status));
else
wake_up_interruptible(&priv->wait_command_queue);
}
/**
* iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
*
* Setup the RX handlers for each of the reply types sent from the uCode
* to the host.
*
* This function chains into the hardware specific files for them to setup
* any hardware specific handlers as well.
*/
static void iwl3945_setup_rx_handlers(struct iwl_priv *priv)
{
priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive;
priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta;
priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
iwl_rx_pm_debug_statistics_notif;
priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif;
/*
* The same handler is used for both the REPLY to a discrete
* statistics request from the host as well as for the periodic
* statistics notifications (after received beacons) from the uCode.
*/
priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_hw_rx_statistics;
priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics;
iwl_setup_spectrum_handlers(priv);
iwl_setup_rx_scan_handlers(priv);
priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif;
/* Set up hardware specific Rx handlers */
iwl3945_hw_rx_handler_setup(priv);
}
/************************** RX-FUNCTIONS ****************************/
/*
* Rx theory of operation
*
* The host allocates 32 DMA target addresses and passes the host address
* to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
* 0 to 31
*
* Rx Queue Indexes
* The host/firmware share two index registers for managing the Rx buffers.
*
* The READ index maps to the first position that the firmware may be writing
* to -- the driver can read up to (but not including) this position and get
* good data.
* The READ index is managed by the firmware once the card is enabled.
*
* The WRITE index maps to the last position the driver has read from -- the
* position preceding WRITE is the last slot the firmware can place a packet.
*
* The queue is empty (no good data) if WRITE = READ - 1, and is full if
* WRITE = READ.
*
* During initialization, the host sets up the READ queue position to the first
* INDEX position, and WRITE to the last (READ - 1 wrapped)
*
* When the firmware places a packet in a buffer, it will advance the READ index
* and fire the RX interrupt. The driver can then query the READ index and
* process as many packets as possible, moving the WRITE index forward as it
* resets the Rx queue buffers with new memory.
*
* The management in the driver is as follows:
* + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
* iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
* to replenish the iwl->rxq->rx_free.
* + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
* iwl->rxq is replenished and the READ INDEX is updated (updating the
* 'processed' and 'read' driver indexes as well)
* + A received packet is processed and handed to the kernel network stack,
* detached from the iwl->rxq. The driver 'processed' index is updated.
* + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
* list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
* INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
* were enough free buffers and RX_STALLED is set it is cleared.
*
*
* Driver sequence:
*
* iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
* iwl3945_rx_queue_restock
* iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
* queue, updates firmware pointers, and updates
* the WRITE index. If insufficient rx_free buffers
* are available, schedules iwl3945_rx_replenish
*
* -- enable interrupts --
* ISR - iwl3945_rx() Detach iwl_rx_mem_buffers from pool up to the
* READ INDEX, detaching the SKB from the pool.
* Moves the packet buffer from queue to rx_used.
* Calls iwl3945_rx_queue_restock to refill any empty
* slots.
* ...
*
*/
/**
* iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
*/
static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl_priv *priv,
dma_addr_t dma_addr)
{
return cpu_to_le32((u32)dma_addr);
}
/**
* iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
*
* If there are slots in the RX queue that need to be restocked,
* and we have free pre-allocated buffers, fill the ranks as much
* as we can, pulling from rx_free.
*
* This moves the 'write' index forward to catch up with 'processed', and
* also updates the memory address in the firmware to reference the new
* target buffer.
*/
static int iwl3945_rx_queue_restock(struct iwl_priv *priv)
{
struct iwl_rx_queue *rxq = &priv->rxq;
struct list_head *element;
struct iwl_rx_mem_buffer *rxb;
unsigned long flags;
int write, rc;
spin_lock_irqsave(&rxq->lock, flags);
write = rxq->write & ~0x7;
while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
/* Get next free Rx buffer, remove from free list */
element = rxq->rx_free.next;
rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
list_del(element);
/* Point to Rx buffer via next RBD in circular buffer */
rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->real_dma_addr);
rxq->queue[rxq->write] = rxb;
rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
rxq->free_count--;
}
spin_unlock_irqrestore(&rxq->lock, flags);
/* If the pre-allocated buffer pool is dropping low, schedule to
* refill it */
if (rxq->free_count <= RX_LOW_WATERMARK)
queue_work(priv->workqueue, &priv->rx_replenish);
/* If we've added more space for the firmware to place data, tell it.
* Increment device's write pointer in multiples of 8. */
if ((rxq->write_actual != (rxq->write & ~0x7))
|| (abs(rxq->write - rxq->read) > 7)) {
spin_lock_irqsave(&rxq->lock, flags);
rxq->need_update = 1;
spin_unlock_irqrestore(&rxq->lock, flags);
rc = iwl_rx_queue_update_write_ptr(priv, rxq);
if (rc)
return rc;
}
return 0;
}
/**
* iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
*
* When moving to rx_free an SKB is allocated for the slot.
*
* Also restock the Rx queue via iwl3945_rx_queue_restock.
* This is called as a scheduled work item (except for during initialization)
*/
static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority)
{
struct iwl_rx_queue *rxq = &priv->rxq;
struct list_head *element;
struct iwl_rx_mem_buffer *rxb;
struct sk_buff *skb;
unsigned long flags;
while (1) {
spin_lock_irqsave(&rxq->lock, flags);
if (list_empty(&rxq->rx_used)) {
spin_unlock_irqrestore(&rxq->lock, flags);
return;
}
spin_unlock_irqrestore(&rxq->lock, flags);
if (rxq->free_count > RX_LOW_WATERMARK)
priority |= __GFP_NOWARN;
/* Alloc a new receive buffer */
skb = alloc_skb(priv->hw_params.rx_buf_size, priority);
if (!skb) {
if (net_ratelimit())
IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
if ((rxq->free_count <= RX_LOW_WATERMARK) &&
net_ratelimit())
IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
rxq->free_count);
/* We don't reschedule replenish work here -- we will
* call the restock method and if it still needs
* more buffers it will schedule replenish */
break;
}
spin_lock_irqsave(&rxq->lock, flags);
if (list_empty(&rxq->rx_used)) {
spin_unlock_irqrestore(&rxq->lock, flags);
dev_kfree_skb_any(skb);
return;
}
element = rxq->rx_used.next;
rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
list_del(element);
spin_unlock_irqrestore(&rxq->lock, flags);
rxb->skb = skb;
/* If radiotap head is required, reserve some headroom here.
* The physical head count is a variable rx_stats->phy_count.
* We reserve 4 bytes here. Plus these extra bytes, the
* headroom of the physical head should be enough for the
* radiotap head that iwl3945 supported. See iwl3945_rt.
*/
skb_reserve(rxb->skb, 4);
/* Get physical address of RB/SKB */
rxb->real_dma_addr = pci_map_single(priv->pci_dev,
rxb->skb->data,
priv->hw_params.rx_buf_size,
PCI_DMA_FROMDEVICE);
spin_lock_irqsave(&rxq->lock, flags);
list_add_tail(&rxb->list, &rxq->rx_free);
priv->alloc_rxb_skb++;
rxq->free_count++;
spin_unlock_irqrestore(&rxq->lock, flags);
}
}
void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
{
unsigned long flags;
int i;
spin_lock_irqsave(&rxq->lock, flags);
INIT_LIST_HEAD(&rxq->rx_free);
INIT_LIST_HEAD(&rxq->rx_used);
/* Fill the rx_used queue with _all_ of the Rx buffers */
for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
/* In the reset function, these buffers may have been allocated
* to an SKB, so we need to unmap and free potential storage */
if (rxq->pool[i].skb != NULL) {
pci_unmap_single(priv->pci_dev,
rxq->pool[i].real_dma_addr,
priv->hw_params.rx_buf_size,
PCI_DMA_FROMDEVICE);
priv->alloc_rxb_skb--;
dev_kfree_skb(rxq->pool[i].skb);
rxq->pool[i].skb = NULL;
}
list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
}
/* Set us so that we have processed and used all buffers, but have
* not restocked the Rx queue with fresh buffers */
rxq->read = rxq->write = 0;
rxq->free_count = 0;
rxq->write_actual = 0;
spin_unlock_irqrestore(&rxq->lock, flags);
}
void iwl3945_rx_replenish(void *data)
{
struct iwl_priv *priv = data;
unsigned long flags;
iwl3945_rx_allocate(priv, GFP_KERNEL);
spin_lock_irqsave(&priv->lock, flags);
iwl3945_rx_queue_restock(priv);
spin_unlock_irqrestore(&priv->lock, flags);
}
static void iwl3945_rx_replenish_now(struct iwl_priv *priv)
{
iwl3945_rx_allocate(priv, GFP_ATOMIC);
iwl3945_rx_queue_restock(priv);
}
/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
* If an SKB has been detached, the POOL needs to have its SKB set to NULL
* This free routine walks the list of POOL entries and if SKB is set to
* non NULL it is unmapped and freed
*/
static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
{
int i;
for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
if (rxq->pool[i].skb != NULL) {
pci_unmap_single(priv->pci_dev,
rxq->pool[i].real_dma_addr,
priv->hw_params.rx_buf_size,
PCI_DMA_FROMDEVICE);
dev_kfree_skb(rxq->pool[i].skb);
}
}
pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
rxq->dma_addr);
pci_free_consistent(priv->pci_dev, sizeof(struct iwl_rb_status),
rxq->rb_stts, rxq->rb_stts_dma);
rxq->bd = NULL;
rxq->rb_stts = NULL;
}
/* Convert linear signal-to-noise ratio into dB */
static u8 ratio2dB[100] = {
/* 0 1 2 3 4 5 6 7 8 9 */
0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
};
/* Calculates a relative dB value from a ratio of linear
* (i.e. not dB) signal levels.
* Conversion assumes that levels are voltages (20*log), not powers (10*log). */
int iwl3945_calc_db_from_ratio(int sig_ratio)
{
/* 1000:1 or higher just report as 60 dB */
if (sig_ratio >= 1000)
return 60;
/* 100:1 or higher, divide by 10 and use table,
* add 20 dB to make up for divide by 10 */
if (sig_ratio >= 100)
return 20 + (int)ratio2dB[sig_ratio/10];
/* We shouldn't see this */
if (sig_ratio < 1)
return 0;
/* Use table for ratios 1:1 - 99:1 */
return (int)ratio2dB[sig_ratio];
}
#define PERFECT_RSSI (-20) /* dBm */
#define WORST_RSSI (-95) /* dBm */
#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
/* Calculate an indication of rx signal quality (a percentage, not dBm!).
* See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
* about formulas used below. */
int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm)
{
int sig_qual;
int degradation = PERFECT_RSSI - rssi_dbm;
/* If we get a noise measurement, use signal-to-noise ratio (SNR)
* as indicator; formula is (signal dbm - noise dbm).
* SNR at or above 40 is a great signal (100%).
* Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
* Weakest usable signal is usually 10 - 15 dB SNR. */
if (noise_dbm) {
if (rssi_dbm - noise_dbm >= 40)
return 100;
else if (rssi_dbm < noise_dbm)
return 0;
sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
/* Else use just the signal level.
* This formula is a least squares fit of data points collected and
* compared with a reference system that had a percentage (%) display
* for signal quality. */
} else
sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
(15 * RSSI_RANGE + 62 * degradation)) /
(RSSI_RANGE * RSSI_RANGE);
if (sig_qual > 100)
sig_qual = 100;
else if (sig_qual < 1)
sig_qual = 0;
return sig_qual;
}
/**
* iwl3945_rx_handle - Main entry function for receiving responses from uCode
*
* Uses the priv->rx_handlers callback function array to invoke
* the appropriate handlers, including command responses,
* frame-received notifications, and other notifications.
*/
static void iwl3945_rx_handle(struct iwl_priv *priv)
{
struct iwl_rx_mem_buffer *rxb;
struct iwl_rx_packet *pkt;
struct iwl_rx_queue *rxq = &priv->rxq;
u32 r, i;
int reclaim;
unsigned long flags;
u8 fill_rx = 0;
u32 count = 8;
int total_empty = 0;
/* uCode's read index (stored in shared DRAM) indicates the last Rx
* buffer that the driver may process (last buffer filled by ucode). */
r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
i = rxq->read;
/* calculate total frames need to be restock after handling RX */
total_empty = r - priv->rxq.write_actual;
if (total_empty < 0)
total_empty += RX_QUEUE_SIZE;
if (total_empty > (RX_QUEUE_SIZE / 2))
fill_rx = 1;
/* Rx interrupt, but nothing sent from uCode */
if (i == r)
IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
while (i != r) {
rxb = rxq->queue[i];
/* If an RXB doesn't have a Rx queue slot associated with it,
* then a bug has been introduced in the queue refilling
* routines -- catch it here */
BUG_ON(rxb == NULL);
rxq->queue[i] = NULL;
pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
priv->hw_params.rx_buf_size,
PCI_DMA_FROMDEVICE);
pkt = (struct iwl_rx_packet *)rxb->skb->data;
/* Reclaim a command buffer only if this packet is a response
* to a (driver-originated) command.
* If the packet (e.g. Rx frame) originated from uCode,
* there is no command buffer to reclaim.
* Ucode should set SEQ_RX_FRAME bit if ucode-originated,
* but apparently a few don't get set; catch them here. */
reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
(pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
(pkt->hdr.cmd != REPLY_TX);
/* Based on type of command response or notification,
* handle those that need handling via function in
* rx_handlers table. See iwl3945_setup_rx_handlers() */
if (priv->rx_handlers[pkt->hdr.cmd]) {
IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, i,
get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
} else {
/* No handling needed */
IWL_DEBUG_RX(priv, "r %d i %d No handler needed for %s, 0x%02x\n",
r, i, get_cmd_string(pkt->hdr.cmd),
pkt->hdr.cmd);
}
if (reclaim) {
/* Invoke any callbacks, transfer the skb to caller, and
* fire off the (possibly) blocking iwl_send_cmd()
* as we reclaim the driver command queue */
if (rxb && rxb->skb)
iwl_tx_cmd_complete(priv, rxb);
else
IWL_WARN(priv, "Claim null rxb?\n");
}
/* For now we just don't re-use anything. We can tweak this
* later to try and re-use notification packets and SKBs that
* fail to Rx correctly */
if (rxb->skb != NULL) {
priv->alloc_rxb_skb--;
dev_kfree_skb_any(rxb->skb);
rxb->skb = NULL;
}
spin_lock_irqsave(&rxq->lock, flags);
list_add_tail(&rxb->list, &priv->rxq.rx_used);
spin_unlock_irqrestore(&rxq->lock, flags);
i = (i + 1) & RX_QUEUE_MASK;
/* If there are a lot of unused frames,
* restock the Rx queue so ucode won't assert. */
if (fill_rx) {
count++;
if (count >= 8) {
priv->rxq.read = i;
iwl3945_rx_replenish_now(priv);
count = 0;
}
}
}
/* Backtrack one entry */
priv->rxq.read = i;
if (fill_rx)
iwl3945_rx_replenish_now(priv);
else
iwl3945_rx_queue_restock(priv);
}
/* call this function to flush any scheduled tasklet */
static inline void iwl_synchronize_irq(struct iwl_priv *priv)
{
/* wait to make sure we flush pending tasklet*/
synchronize_irq(priv->pci_dev->irq);
tasklet_kill(&priv->irq_tasklet);
}
#ifdef CONFIG_IWLWIFI_DEBUG
static const char *desc_lookup(int i)
{
switch (i) {
case 1:
return "FAIL";
case 2:
return "BAD_PARAM";
case 3:
return "BAD_CHECKSUM";
case 4:
return "NMI_INTERRUPT";
case 5:
return "SYSASSERT";
case 6:
return "FATAL_ERROR";
}
return "UNKNOWN";
}
#define ERROR_START_OFFSET (1 * sizeof(u32))
#define ERROR_ELEM_SIZE (7 * sizeof(u32))
void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
{
u32 i;
u32 desc, time, count, base, data1;
u32 blink1, blink2, ilink1, ilink2;
base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
if (!iwl3945_hw_valid_rtc_data_addr(base)) {
IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
return;
}
count = iwl_read_targ_mem(priv, base);
if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
IWL_ERR(priv, "Start IWL Error Log Dump:\n");
IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
priv->status, count);
}
IWL_ERR(priv, "Desc Time asrtPC blink2 "
"ilink1 nmiPC Line\n");
for (i = ERROR_START_OFFSET;
i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
i += ERROR_ELEM_SIZE) {
desc = iwl_read_targ_mem(priv, base + i);
time =
iwl_read_targ_mem(priv, base + i + 1 * sizeof(u32));
blink1 =
iwl_read_targ_mem(priv, base + i + 2 * sizeof(u32));
blink2 =
iwl_read_targ_mem(priv, base + i + 3 * sizeof(u32));
ilink1 =
iwl_read_targ_mem(priv, base + i + 4 * sizeof(u32));
ilink2 =
iwl_read_targ_mem(priv, base + i + 5 * sizeof(u32));
data1 =
iwl_read_targ_mem(priv, base + i + 6 * sizeof(u32));
IWL_ERR(priv,
"%-13s (#%d) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
desc_lookup(desc), desc, time, blink1, blink2,
ilink1, ilink2, data1);
}
}
#define EVENT_START_OFFSET (6 * sizeof(u32))
/**
* iwl3945_print_event_log - Dump error event log to syslog
*
*/
static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
u32 num_events, u32 mode)
{
u32 i;
u32 base; /* SRAM byte address of event log header */
u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
u32 ptr; /* SRAM byte address of log data */
u32 ev, time, data; /* event log data */
if (num_events == 0)
return;
base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
if (mode == 0)
event_size = 2 * sizeof(u32);
else
event_size = 3 * sizeof(u32);
ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
/* "time" is actually "data" for mode 0 (no timestamp).
* place event id # at far right for easier visual parsing. */
for (i = 0; i < num_events; i++) {
ev = iwl_read_targ_mem(priv, ptr);
ptr += sizeof(u32);
time = iwl_read_targ_mem(priv, ptr);
ptr += sizeof(u32);
if (mode == 0) {
/* data, ev */
IWL_ERR(priv, "0x%08x\t%04u\n", time, ev);
} else {
data = iwl_read_targ_mem(priv, ptr);
ptr += sizeof(u32);
IWL_ERR(priv, "%010u\t0x%08x\t%04u\n", time, data, ev);
}
}
}
void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
{
u32 base; /* SRAM byte address of event log header */
u32 capacity; /* event log capacity in # entries */
u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
u32 num_wraps; /* # times uCode wrapped to top of log */
u32 next_entry; /* index of next entry to be written by uCode */
u32 size; /* # entries that we'll print */
base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
if (!iwl3945_hw_valid_rtc_data_addr(base)) {
IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
return;
}
/* event log header */
capacity = iwl_read_targ_mem(priv, base);
mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
size = num_wraps ? capacity : next_entry;
/* bail out if nothing in log */
if (size == 0) {
IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
return;
}
IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
size, num_wraps);
/* if uCode has wrapped back to top of log, start at the oldest entry,
* i.e the next one that uCode would fill. */
if (num_wraps)
iwl3945_print_event_log(priv, next_entry,
capacity - next_entry, mode);
/* (then/else) start at top of log */
iwl3945_print_event_log(priv, 0, next_entry, mode);
}
#else
void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
{
}
void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
{
}
#endif
static void iwl3945_irq_tasklet(struct iwl_priv *priv)
{
u32 inta, handled = 0;
u32 inta_fh;
unsigned long flags;
#ifdef CONFIG_IWLWIFI_DEBUG
u32 inta_mask;
#endif
spin_lock_irqsave(&priv->lock, flags);
/* Ack/clear/reset pending uCode interrupts.
* Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
* and will clear only when CSR_FH_INT_STATUS gets cleared. */
inta = iwl_read32(priv, CSR_INT);
iwl_write32(priv, CSR_INT, inta);
/* Ack/clear/reset pending flow-handler (DMA) interrupts.
* Any new interrupts that happen after this, either while we're
* in this tasklet, or later, will show up in next ISR/tasklet. */
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
/* just for debug */
inta_mask = iwl_read32(priv, CSR_INT_MASK);
IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
inta, inta_mask, inta_fh);
}
#endif
/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
* atomic, make sure that inta covers all the interrupts that
* we've discovered, even if FH interrupt came in just after
* reading CSR_INT. */
if (inta_fh & CSR39_FH_INT_RX_MASK)
inta |= CSR_INT_BIT_FH_RX;
if (inta_fh & CSR39_FH_INT_TX_MASK)
inta |= CSR_INT_BIT_FH_TX;
/* Now service all interrupt bits discovered above. */
if (inta & CSR_INT_BIT_HW_ERR) {
IWL_ERR(priv, "Hardware error detected. Restarting.\n");
/* Tell the device to stop sending interrupts */
iwl_disable_interrupts(priv);
priv->isr_stats.hw++;
iwl_irq_handle_error(priv);
handled |= CSR_INT_BIT_HW_ERR;
spin_unlock_irqrestore(&priv->lock, flags);
return;
}
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
if (inta & CSR_INT_BIT_SCD) {
IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
"the frame/frames.\n");
priv->isr_stats.sch++;
}
/* Alive notification via Rx interrupt will do the real work */
if (inta & CSR_INT_BIT_ALIVE) {
IWL_DEBUG_ISR(priv, "Alive interrupt\n");
priv->isr_stats.alive++;
}
}
#endif
/* Safely ignore these bits for debug checks below */
inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
/* Error detected by uCode */
if (inta & CSR_INT_BIT_SW_ERR) {
IWL_ERR(priv, "Microcode SW error detected. "
"Restarting 0x%X.\n", inta);
priv->isr_stats.sw++;
priv->isr_stats.sw_err = inta;
iwl_irq_handle_error(priv);
handled |= CSR_INT_BIT_SW_ERR;
}
/* uCode wakes up after power-down sleep */
if (inta & CSR_INT_BIT_WAKEUP) {
IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
iwl_txq_update_write_ptr(priv, &priv->txq[0]);
iwl_txq_update_write_ptr(priv, &priv->txq[1]);
iwl_txq_update_write_ptr(priv, &priv->txq[2]);
iwl_txq_update_write_ptr(priv, &priv->txq[3]);
iwl_txq_update_write_ptr(priv, &priv->txq[4]);
iwl_txq_update_write_ptr(priv, &priv->txq[5]);
priv->isr_stats.wakeup++;
handled |= CSR_INT_BIT_WAKEUP;
}
/* All uCode command responses, including Tx command responses,
* Rx "responses" (frame-received notification), and other
* notifications from uCode come through here*/
if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
iwl3945_rx_handle(priv);
priv->isr_stats.rx++;
handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
}
if (inta & CSR_INT_BIT_FH_TX) {
IWL_DEBUG_ISR(priv, "Tx interrupt\n");
priv->isr_stats.tx++;
iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
iwl_write_direct32(priv, FH39_TCSR_CREDIT
(FH39_SRVC_CHNL), 0x0);
handled |= CSR_INT_BIT_FH_TX;
}
if (inta & ~handled) {
IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
priv->isr_stats.unhandled++;
}
if (inta & ~priv->inta_mask) {
IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
inta & ~priv->inta_mask);
IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh);
}
/* Re-enable all interrupts */
/* only Re-enable if disabled by irq */
if (test_bit(STATUS_INT_ENABLED, &priv->status))
iwl_enable_interrupts(priv);
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
inta = iwl_read32(priv, CSR_INT);
inta_mask = iwl_read32(priv, CSR_INT_MASK);
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
}
#endif
spin_unlock_irqrestore(&priv->lock, flags);
}
static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
enum ieee80211_band band,
u8 is_active, u8 n_probes,
struct iwl3945_scan_channel *scan_ch)
{
struct ieee80211_channel *chan;
const struct ieee80211_supported_band *sband;
const struct iwl_channel_info *ch_info;
u16 passive_dwell = 0;
u16 active_dwell = 0;
int added, i;
sband = iwl_get_hw_mode(priv, band);
if (!sband)
return 0;
active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
passive_dwell = iwl_get_passive_dwell_time(priv, band);
if (passive_dwell <= active_dwell)
passive_dwell = active_dwell + 1;
for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
chan = priv->scan_request->channels[i];
if (chan->band != band)
continue;
scan_ch->channel = chan->hw_value;
ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
if (!is_channel_valid(ch_info)) {
IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
scan_ch->channel);
continue;
}
scan_ch->active_dwell = cpu_to_le16(active_dwell);
scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
/* If passive , set up for auto-switch
* and use long active_dwell time.
*/
if (!is_active || is_channel_passive(ch_info) ||
(chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
scan_ch->type = 0; /* passive */
if (IWL_UCODE_API(priv->ucode_ver) == 1)
scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1);
} else {
scan_ch->type = 1; /* active */
}
/* Set direct probe bits. These may be used both for active
* scan channels (probes gets sent right away),
* or for passive channels (probes get se sent only after
* hearing clear Rx packet).*/
if (IWL_UCODE_API(priv->ucode_ver) >= 2) {
if (n_probes)
scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes);
} else {
/* uCode v1 does not allow setting direct probe bits on
* passive channel. */
if ((scan_ch->type & 1) && n_probes)
scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes);
}
/* Set txpower levels to defaults */
scan_ch->tpc.dsp_atten = 110;
/* scan_pwr_info->tpc.dsp_atten; */
/*scan_pwr_info->tpc.tx_gain; */
if (band == IEEE80211_BAND_5GHZ)
scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
else {
scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
/* NOTE: if we were doing 6Mb OFDM for scans we'd use
* power level:
* scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
*/
}
IWL_DEBUG_SCAN(priv, "Scanning %d [%s %d]\n",
scan_ch->channel,
(scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
(scan_ch->type & 1) ?
active_dwell : passive_dwell);
scan_ch++;
added++;
}
IWL_DEBUG_SCAN(priv, "total channels to scan %d \n", added);
return added;
}
static void iwl3945_init_hw_rates(struct iwl_priv *priv,
struct ieee80211_rate *rates)
{
int i;
for (i = 0; i < IWL_RATE_COUNT; i++) {
rates[i].bitrate = iwl3945_rates[i].ieee * 5;
rates[i].hw_value = i; /* Rate scaling will work on indexes */
rates[i].hw_value_short = i;
rates[i].flags = 0;
if ((i > IWL39_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
/*
* If CCK != 1M then set short preamble rate flag.
*/
rates[i].flags |= (iwl3945_rates[i].plcp == 10) ?
0 : IEEE80211_RATE_SHORT_PREAMBLE;
}
}
}
/******************************************************************************
*
* uCode download functions
*
******************************************************************************/
static void iwl3945_dealloc_ucode_pci(struct iwl_priv *priv)
{
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
}
/**
* iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
* looking at all data.
*/
static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 len)
{
u32 val;
u32 save_len = len;
int rc = 0;
u32 errcnt;
IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
IWL39_RTC_INST_LOWER_BOUND);
errcnt = 0;
for (; len > 0; len -= sizeof(u32), image++) {
/* read data comes through single port, auto-incr addr */
/* NOTE: Use the debugless read so we don't flood kernel log
* if IWL_DL_IO is set */
val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image)) {
IWL_ERR(priv, "uCode INST section is invalid at "
"offset 0x%x, is 0x%x, s/b 0x%x\n",
save_len - len, val, le32_to_cpu(*image));
rc = -EIO;
errcnt++;
if (errcnt >= 20)
break;
}
}
if (!errcnt)
IWL_DEBUG_INFO(priv,
"ucode image in INSTRUCTION memory is good\n");
return rc;
}
/**
* iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
* using sample data 100 bytes apart. If these sample points are good,
* it's a pretty good bet that everything between them is good, too.
*/
static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
{
u32 val;
int rc = 0;
u32 errcnt = 0;
u32 i;
IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
/* read data comes through single port, auto-incr addr */
/* NOTE: Use the debugless read so we don't flood kernel log
* if IWL_DL_IO is set */
iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
i + IWL39_RTC_INST_LOWER_BOUND);
val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image)) {
#if 0 /* Enable this if you want to see details */
IWL_ERR(priv, "uCode INST section is invalid at "
"offset 0x%x, is 0x%x, s/b 0x%x\n",
i, val, *image);
#endif
rc = -EIO;
errcnt++;
if (errcnt >= 3)
break;
}
}
return rc;
}
/**
* iwl3945_verify_ucode - determine which instruction image is in SRAM,
* and verify its contents
*/
static int iwl3945_verify_ucode(struct iwl_priv *priv)
{
__le32 *image;
u32 len;
int rc = 0;
/* Try bootstrap */
image = (__le32 *)priv->ucode_boot.v_addr;
len = priv->ucode_boot.len;
rc = iwl3945_verify_inst_sparse(priv, image, len);
if (rc == 0) {
IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n");
return 0;
}
/* Try initialize */
image = (__le32 *)priv->ucode_init.v_addr;
len = priv->ucode_init.len;
rc = iwl3945_verify_inst_sparse(priv, image, len);
if (rc == 0) {
IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n");
return 0;
}
/* Try runtime/protocol */
image = (__le32 *)priv->ucode_code.v_addr;
len = priv->ucode_code.len;
rc = iwl3945_verify_inst_sparse(priv, image, len);
if (rc == 0) {
IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n");
return 0;
}
IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
/* Since nothing seems to match, show first several data entries in
* instruction SRAM, so maybe visual inspection will give a clue.
* Selection of bootstrap image (vs. other images) is arbitrary. */
image = (__le32 *)priv->ucode_boot.v_addr;
len = priv->ucode_boot.len;
rc = iwl3945_verify_inst_full(priv, image, len);
return rc;
}
static void iwl3945_nic_start(struct iwl_priv *priv)
{
/* Remove all resets to allow NIC to operate */
iwl_write32(priv, CSR_RESET, 0);
}
/**
* iwl3945_read_ucode - Read uCode images from disk file.
*
* Copy into buffers for card to fetch via bus-mastering
*/
static int iwl3945_read_ucode(struct iwl_priv *priv)
{
const struct iwl_ucode_header *ucode;
int ret = -EINVAL, index;
const struct firmware *ucode_raw;
/* firmware file name contains uCode/driver compatibility version */
const char *name_pre = priv->cfg->fw_name_pre;
const unsigned int api_max = priv->cfg->ucode_api_max;
const unsigned int api_min = priv->cfg->ucode_api_min;
char buf[25];
u8 *src;
size_t len;
u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
/* Ask kernel firmware_class module to get the boot firmware off disk.
* request_firmware() is synchronous, file is in memory on return. */
for (index = api_max; index >= api_min; index--) {
sprintf(buf, "%s%u%s", name_pre, index, ".ucode");
ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
if (ret < 0) {
IWL_ERR(priv, "%s firmware file req failed: %d\n",
buf, ret);
if (ret == -ENOENT)
continue;
else
goto error;
} else {
if (index < api_max)
IWL_ERR(priv, "Loaded firmware %s, "
"which is deprecated. "
" Please use API v%u instead.\n",
buf, api_max);
IWL_DEBUG_INFO(priv, "Got firmware '%s' file "
"(%zd bytes) from disk\n",
buf, ucode_raw->size);
break;
}
}
if (ret < 0)
goto error;
/* Make sure that we got at least our header! */
if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
IWL_ERR(priv, "File size way too small!\n");
ret = -EINVAL;
goto err_release;
}
/* Data from ucode file: header followed by uCode images */
ucode = (struct iwl_ucode_header *)ucode_raw->data;
priv->ucode_ver = le32_to_cpu(ucode->ver);
api_ver = IWL_UCODE_API(priv->ucode_ver);
inst_size = priv->cfg->ops->ucode->get_inst_size(ucode, api_ver);
data_size = priv->cfg->ops->ucode->get_data_size(ucode, api_ver);
init_size = priv->cfg->ops->ucode->get_init_size(ucode, api_ver);
init_data_size =
priv->cfg->ops->ucode->get_init_data_size(ucode, api_ver);
boot_size = priv->cfg->ops->ucode->get_boot_size(ucode, api_ver);
src = priv->cfg->ops->ucode->get_data(ucode, api_ver);
/* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
* on the API version read from firmware header from here on forward */
if (api_ver < api_min || api_ver > api_max) {
IWL_ERR(priv, "Driver unable to support your firmware API. "
"Driver supports v%u, firmware is v%u.\n",
api_max, api_ver);
priv->ucode_ver = 0;
ret = -EINVAL;
goto err_release;
}
if (api_ver != api_max)
IWL_ERR(priv, "Firmware has old API version. Expected %u, "
"got %u. New firmware can be obtained "
"from http://www.intellinuxwireless.org.\n",
api_max, api_ver);
IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n",
IWL_UCODE_MAJOR(priv->ucode_ver),
IWL_UCODE_MINOR(priv->ucode_ver),
IWL_UCODE_API(priv->ucode_ver),
IWL_UCODE_SERIAL(priv->ucode_ver));
IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
priv->ucode_ver);
IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
inst_size);
IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
data_size);
IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
init_size);
IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
init_data_size);
IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
boot_size);
/* Verify size of file vs. image size info in file's header */
if (ucode_raw->size != priv->cfg->ops->ucode->get_header_size(api_ver) +
inst_size + data_size + init_size +
init_data_size + boot_size) {
IWL_DEBUG_INFO(priv,
"uCode file size %zd does not match expected size\n",
ucode_raw->size);
ret = -EINVAL;
goto err_release;
}
/* Verify that uCode images will fit in card's SRAM */
if (inst_size > IWL39_MAX_INST_SIZE) {
IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
inst_size);
ret = -EINVAL;
goto err_release;
}
if (data_size > IWL39_MAX_DATA_SIZE) {
IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
data_size);
ret = -EINVAL;
goto err_release;
}
if (init_size > IWL39_MAX_INST_SIZE) {
IWL_DEBUG_INFO(priv,
"uCode init instr len %d too large to fit in\n",
init_size);
ret = -EINVAL;
goto err_release;
}
if (init_data_size > IWL39_MAX_DATA_SIZE) {
IWL_DEBUG_INFO(priv,
"uCode init data len %d too large to fit in\n",
init_data_size);
ret = -EINVAL;
goto err_release;
}
if (boot_size > IWL39_MAX_BSM_SIZE) {
IWL_DEBUG_INFO(priv,
"uCode boot instr len %d too large to fit in\n",
boot_size);
ret = -EINVAL;
goto err_release;
}
/* Allocate ucode buffers for card's bus-master loading ... */
/* Runtime instructions and 2 copies of data:
* 1) unmodified from disk
* 2) backup cache for save/restore during power-downs */
priv->ucode_code.len = inst_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
priv->ucode_data.len = data_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
priv->ucode_data_backup.len = data_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
!priv->ucode_data_backup.v_addr)
goto err_pci_alloc;
/* Initialization instructions and data */
if (init_size && init_data_size) {
priv->ucode_init.len = init_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
priv->ucode_init_data.len = init_data_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
goto err_pci_alloc;
}
/* Bootstrap (instructions only, no data) */
if (boot_size) {
priv->ucode_boot.len = boot_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
if (!priv->ucode_boot.v_addr)
goto err_pci_alloc;
}
/* Copy images into buffers for card's bus-master reads ... */
/* Runtime instructions (first block of data in file) */
len = inst_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) uCode instr len %zd\n", len);
memcpy(priv->ucode_code.v_addr, src, len);
src += len;
IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
/* Runtime data (2nd block)
* NOTE: Copy into backup buffer will be done in iwl3945_up() */
len = data_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) uCode data len %zd\n", len);
memcpy(priv->ucode_data.v_addr, src, len);
memcpy(priv->ucode_data_backup.v_addr, src, len);
src += len;
/* Initialization instructions (3rd block) */
if (init_size) {
len = init_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) init instr len %zd\n", len);
memcpy(priv->ucode_init.v_addr, src, len);
src += len;
}
/* Initialization data (4th block) */
if (init_data_size) {
len = init_data_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) init data len %zd\n", len);
memcpy(priv->ucode_init_data.v_addr, src, len);
src += len;
}
/* Bootstrap instructions (5th block) */
len = boot_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) boot instr len %zd\n", len);
memcpy(priv->ucode_boot.v_addr, src, len);
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
return 0;
err_pci_alloc:
IWL_ERR(priv, "failed to allocate pci memory\n");
ret = -ENOMEM;
iwl3945_dealloc_ucode_pci(priv);
err_release:
release_firmware(ucode_raw);
error:
return ret;
}
/**
* iwl3945_set_ucode_ptrs - Set uCode address location
*
* Tell initialization uCode where to find runtime uCode.
*
* BSM registers initially contain pointers to initialization uCode.
* We need to replace them to load runtime uCode inst and data,
* and to save runtime data when powering down.
*/
static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv)
{
dma_addr_t pinst;
dma_addr_t pdata;
/* bits 31:0 for 3945 */
pinst = priv->ucode_code.p_addr;
pdata = priv->ucode_data_backup.p_addr;
/* Tell bootstrap uCode where to find image to load */
iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
priv->ucode_data.len);
/* Inst byte count must be last to set up, bit 31 signals uCode
* that all new ptr/size info is in place */
iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
priv->ucode_code.len | BSM_DRAM_INST_LOAD);
IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
return 0;
}
/**
* iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
*
* Called after REPLY_ALIVE notification received from "initialize" uCode.
*
* Tell "initialize" uCode to go ahead and load the runtime uCode.
*/
static void iwl3945_init_alive_start(struct iwl_priv *priv)
{
/* Check alive response for "valid" sign from uCode */
if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
/* We had an error bringing up the hardware, so take it
* all the way back down so we can try again */
IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n");
goto restart;
}
/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
* This is a paranoid check, because we would not have gotten the
* "initialize" alive if code weren't properly loaded. */
if (iwl3945_verify_ucode(priv)) {
/* Runtime instruction load was bad;
* take it all the way back down so we can try again */
IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
goto restart;
}
/* Send pointers to protocol/runtime uCode image ... init code will
* load and launch runtime uCode, which will send us another "Alive"
* notification. */
IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
if (iwl3945_set_ucode_ptrs(priv)) {
/* Runtime instruction load won't happen;
* take it all the way back down so we can try again */
IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n");
goto restart;
}
return;
restart:
queue_work(priv->workqueue, &priv->restart);
}
/**
* iwl3945_alive_start - called after REPLY_ALIVE notification received
* from protocol/runtime uCode (initialization uCode's
* Alive gets handled by iwl3945_init_alive_start()).
*/
static void iwl3945_alive_start(struct iwl_priv *priv)
{
int thermal_spin = 0;
u32 rfkill;
IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
if (priv->card_alive.is_valid != UCODE_VALID_OK) {
/* We had an error bringing up the hardware, so take it
* all the way back down so we can try again */
IWL_DEBUG_INFO(priv, "Alive failed.\n");
goto restart;
}
/* Initialize uCode has loaded Runtime uCode ... verify inst image.
* This is a paranoid check, because we would not have gotten the
* "runtime" alive if code weren't properly loaded. */
if (iwl3945_verify_ucode(priv)) {
/* Runtime instruction load was bad;
* take it all the way back down so we can try again */
IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
goto restart;
}
iwl_clear_stations_table(priv);
rfkill = iwl_read_prph(priv, APMG_RFKILL_REG);
IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill);
if (rfkill & 0x1) {
clear_bit(STATUS_RF_KILL_HW, &priv->status);
/* if RFKILL is not on, then wait for thermal
* sensor in adapter to kick in */
while (iwl3945_hw_get_temperature(priv) == 0) {
thermal_spin++;
udelay(10);
}
if (thermal_spin)
IWL_DEBUG_INFO(priv, "Thermal calibration took %dus\n",
thermal_spin * 10);
} else
set_bit(STATUS_RF_KILL_HW, &priv->status);
/* After the ALIVE response, we can send commands to 3945 uCode */
set_bit(STATUS_ALIVE, &priv->status);
if (iwl_is_rfkill(priv))
return;
ieee80211_wake_queues(priv->hw);
priv->active_rate = priv->rates_mask;
priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
iwl_power_update_mode(priv, false);
if (iwl_is_associated(priv)) {
struct iwl3945_rxon_cmd *active_rxon =
(struct iwl3945_rxon_cmd *)(&priv->active_rxon);
priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
} else {
/* Initialize our rx_config data */
iwl_connection_init_rx_config(priv, priv->iw_mode);
}
/* Configure Bluetooth device coexistence support */
iwl_send_bt_config(priv);
/* Configure the adapter for unassociated operation */
iwlcore_commit_rxon(priv);
iwl3945_reg_txpower_periodic(priv);
iwl3945_led_register(priv);
IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
set_bit(STATUS_READY, &priv->status);
wake_up_interruptible(&priv->wait_command_queue);
/* reassociate for ADHOC mode */
if (priv->vif && (priv->iw_mode == NL80211_IFTYPE_ADHOC)) {
struct sk_buff *beacon = ieee80211_beacon_get(priv->hw,
priv->vif);
if (beacon)
iwl_mac_beacon_update(priv->hw, beacon);
}
if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status))
iwl_set_mode(priv, priv->iw_mode);
return;
restart:
queue_work(priv->workqueue, &priv->restart);
}
static void iwl3945_cancel_deferred_work(struct iwl_priv *priv);
static void __iwl3945_down(struct iwl_priv *priv)
{
unsigned long flags;
int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
struct ieee80211_conf *conf = NULL;
IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
conf = ieee80211_get_hw_conf(priv->hw);
if (!exit_pending)
set_bit(STATUS_EXIT_PENDING, &priv->status);
iwl3945_led_unregister(priv);
iwl_clear_stations_table(priv);
/* Unblock any waiting calls */
wake_up_interruptible_all(&priv->wait_command_queue);
/* Wipe out the EXIT_PENDING status bit if we are not actually
* exiting the module */
if (!exit_pending)
clear_bit(STATUS_EXIT_PENDING, &priv->status);
/* stop and reset the on-board processor */
iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
/* tell the device to stop sending interrupts */
spin_lock_irqsave(&priv->lock, flags);
iwl_disable_interrupts(priv);
spin_unlock_irqrestore(&priv->lock, flags);
iwl_synchronize_irq(priv);
if (priv->mac80211_registered)
ieee80211_stop_queues(priv->hw);
/* If we have not previously called iwl3945_init() then
* clear all bits but the RF Kill bits and return */
if (!iwl_is_init(priv)) {
priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
STATUS_RF_KILL_HW |
test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
STATUS_GEO_CONFIGURED |
test_bit(STATUS_EXIT_PENDING, &priv->status) <<
STATUS_EXIT_PENDING;
goto exit;
}
/* ...otherwise clear out all the status bits but the RF Kill
* bit and continue taking the NIC down. */
priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
STATUS_RF_KILL_HW |
test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
STATUS_GEO_CONFIGURED |
test_bit(STATUS_FW_ERROR, &priv->status) <<
STATUS_FW_ERROR |
test_bit(STATUS_EXIT_PENDING, &priv->status) <<
STATUS_EXIT_PENDING;
priv->cfg->ops->lib->apm_ops.reset(priv);
spin_lock_irqsave(&priv->lock, flags);
iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
spin_unlock_irqrestore(&priv->lock, flags);
iwl3945_hw_txq_ctx_stop(priv);
iwl3945_hw_rxq_stop(priv);
iwl_write_prph(priv, APMG_CLK_DIS_REG,
APMG_CLK_VAL_DMA_CLK_RQT);
udelay(5);
if (exit_pending)
priv->cfg->ops->lib->apm_ops.stop(priv);
else
priv->cfg->ops->lib->apm_ops.reset(priv);
exit:
memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
if (priv->ibss_beacon)
dev_kfree_skb(priv->ibss_beacon);
priv->ibss_beacon = NULL;
/* clear out any free frames */
iwl3945_clear_free_frames(priv);
}
static void iwl3945_down(struct iwl_priv *priv)
{
mutex_lock(&priv->mutex);
__iwl3945_down(priv);
mutex_unlock(&priv->mutex);
iwl3945_cancel_deferred_work(priv);
}
#define MAX_HW_RESTARTS 5
static int __iwl3945_up(struct iwl_priv *priv)
{
int rc, i;
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
return -EIO;
}
if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
IWL_ERR(priv, "ucode not available for device bring up\n");
return -EIO;
}
/* If platform's RF_KILL switch is NOT set to KILL */
if (iwl_read32(priv, CSR_GP_CNTRL) &
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
clear_bit(STATUS_RF_KILL_HW, &priv->status);
else {
set_bit(STATUS_RF_KILL_HW, &priv->status);
IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
return -ENODEV;
}
iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
rc = iwl3945_hw_nic_init(priv);
if (rc) {
IWL_ERR(priv, "Unable to int nic\n");
return rc;
}
/* make sure rfkill handshake bits are cleared */
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
/* clear (again), then enable host interrupts */
iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
iwl_enable_interrupts(priv);
/* really make sure rfkill handshake bits are cleared */
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
/* Copy original ucode data image from disk into backup cache.
* This will be used to initialize the on-board processor's
* data SRAM for a clean start when the runtime program first loads. */
memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
priv->ucode_data.len);
/* We return success when we resume from suspend and rf_kill is on. */
if (test_bit(STATUS_RF_KILL_HW, &priv->status))
return 0;
for (i = 0; i < MAX_HW_RESTARTS; i++) {
iwl_clear_stations_table(priv);
/* load bootstrap state machine,
* load bootstrap program into processor's memory,
* prepare to load the "initialize" uCode */
priv->cfg->ops->lib->load_ucode(priv);
if (rc) {
IWL_ERR(priv,
"Unable to set up bootstrap uCode: %d\n", rc);
continue;
}
/* start card; "initialize" will load runtime ucode */
iwl3945_nic_start(priv);
IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
return 0;
}
set_bit(STATUS_EXIT_PENDING, &priv->status);
__iwl3945_down(priv);
clear_bit(STATUS_EXIT_PENDING, &priv->status);
/* tried to restart and config the device for as long as our
* patience could withstand */
IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
return -EIO;
}
/*****************************************************************************
*
* Workqueue callbacks
*
*****************************************************************************/
static void iwl3945_bg_init_alive_start(struct work_struct *data)
{
struct iwl_priv *priv =
container_of(data, struct iwl_priv, init_alive_start.work);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
mutex_lock(&priv->mutex);
iwl3945_init_alive_start(priv);
mutex_unlock(&priv->mutex);
}
static void iwl3945_bg_alive_start(struct work_struct *data)
{
struct iwl_priv *priv =
container_of(data, struct iwl_priv, alive_start.work);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
mutex_lock(&priv->mutex);
iwl3945_alive_start(priv);
mutex_unlock(&priv->mutex);
}
static void iwl3945_rfkill_poll(struct work_struct *data)
{
struct iwl_priv *priv =
container_of(data, struct iwl_priv, rfkill_poll.work);
if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
clear_bit(STATUS_RF_KILL_HW, &priv->status);
else
set_bit(STATUS_RF_KILL_HW, &priv->status);
wiphy_rfkill_set_hw_state(priv->hw->wiphy,
test_bit(STATUS_RF_KILL_HW, &priv->status));
queue_delayed_work(priv->workqueue, &priv->rfkill_poll,
round_jiffies_relative(2 * HZ));
}
#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
static void iwl3945_bg_request_scan(struct work_struct *data)
{
struct iwl_priv *priv =
container_of(data, struct iwl_priv, request_scan);
struct iwl_host_cmd cmd = {
.id = REPLY_SCAN_CMD,
.len = sizeof(struct iwl3945_scan_cmd),
.flags = CMD_SIZE_HUGE,
};
int rc = 0;
struct iwl3945_scan_cmd *scan;
struct ieee80211_conf *conf = NULL;
u8 n_probes = 0;
enum ieee80211_band band;
bool is_active = false;
conf = ieee80211_get_hw_conf(priv->hw);
mutex_lock(&priv->mutex);
cancel_delayed_work(&priv->scan_check);
if (!iwl_is_ready(priv)) {
IWL_WARN(priv, "request scan called when driver not ready.\n");
goto done;
}
/* Make sure the scan wasn't canceled before this queued work
* was given the chance to run... */
if (!test_bit(STATUS_SCANNING, &priv->status))
goto done;
/* This should never be called or scheduled if there is currently
* a scan active in the hardware. */
if (test_bit(STATUS_SCAN_HW, &priv->status)) {
IWL_DEBUG_INFO(priv, "Multiple concurrent scan requests "
"Ignoring second request.\n");
rc = -EIO;
goto done;
}
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_DEBUG_SCAN(priv, "Aborting scan due to device shutdown\n");
goto done;
}
if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
IWL_DEBUG_HC(priv,
"Scan request while abort pending. Queuing.\n");
goto done;
}
if (iwl_is_rfkill(priv)) {
IWL_DEBUG_HC(priv, "Aborting scan due to RF Kill activation\n");
goto done;
}
if (!test_bit(STATUS_READY, &priv->status)) {
IWL_DEBUG_HC(priv,
"Scan request while uninitialized. Queuing.\n");
goto done;
}
if (!priv->scan_bands) {
IWL_DEBUG_HC(priv, "Aborting scan due to no requested bands\n");
goto done;
}
if (!priv->scan) {
priv->scan = kmalloc(sizeof(struct iwl3945_scan_cmd) +
IWL_MAX_SCAN_SIZE, GFP_KERNEL);
if (!priv->scan) {
rc = -ENOMEM;
goto done;
}
}
scan = priv->scan;
memset(scan, 0, sizeof(struct iwl3945_scan_cmd) + IWL_MAX_SCAN_SIZE);
scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
if (iwl_is_associated(priv)) {
u16 interval = 0;
u32 extra;
u32 suspend_time = 100;
u32 scan_suspend_time = 100;
unsigned long flags;
IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
spin_lock_irqsave(&priv->lock, flags);
interval = priv->beacon_int;
spin_unlock_irqrestore(&priv->lock, flags);
scan->suspend_time = 0;
scan->max_out_time = cpu_to_le32(200 * 1024);
if (!interval)
interval = suspend_time;
/*
* suspend time format:
* 0-19: beacon interval in usec (time before exec.)
* 20-23: 0
* 24-31: number of beacons (suspend between channels)
*/
extra = (suspend_time / interval) << 24;
scan_suspend_time = 0xFF0FFFFF &
(extra | ((suspend_time % interval) * 1024));
scan->suspend_time = cpu_to_le32(scan_suspend_time);
IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
scan_suspend_time, interval);
}
if (priv->scan_request->n_ssids) {
int i, p = 0;
IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
for (i = 0; i < priv->scan_request->n_ssids; i++) {
/* always does wildcard anyway */
if (!priv->scan_request->ssids[i].ssid_len)
continue;
scan->direct_scan[p].id = WLAN_EID_SSID;
scan->direct_scan[p].len =
priv->scan_request->ssids[i].ssid_len;
memcpy(scan->direct_scan[p].ssid,
priv->scan_request->ssids[i].ssid,
priv->scan_request->ssids[i].ssid_len);
n_probes++;
p++;
}
is_active = true;
} else
IWL_DEBUG_SCAN(priv, "Kicking off passive scan.\n");
/* We don't build a direct scan probe request; the uCode will do
* that based on the direct_mask added to each channel entry */
scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
/* flags + rate selection */
if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
scan->good_CRC_th = 0;
band = IEEE80211_BAND_2GHZ;
} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
/*
* If active scaning is requested but a certain channel
* is marked passive, we can do active scanning if we
* detect transmissions.
*/
scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
band = IEEE80211_BAND_5GHZ;
} else {
IWL_WARN(priv, "Invalid scan band count\n");
goto done;
}
scan->tx_cmd.len = cpu_to_le16(
iwl_fill_probe_req(priv,
(struct ieee80211_mgmt *)scan->data,
priv->scan_request->ie,
priv->scan_request->ie_len,
IWL_MAX_SCAN_SIZE - sizeof(*scan)));
/* select Rx antennas */
scan->flags |= iwl3945_get_antenna_flags(priv);
if (iwl_is_monitor_mode(priv))
scan->filter_flags = RXON_FILTER_PROMISC_MSK;
scan->channel_count =
iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
if (scan->channel_count == 0) {
IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
goto done;
}
cmd.len += le16_to_cpu(scan->tx_cmd.len) +
scan->channel_count * sizeof(struct iwl3945_scan_channel);
cmd.data = scan;
scan->len = cpu_to_le16(cmd.len);
set_bit(STATUS_SCAN_HW, &priv->status);
rc = iwl_send_cmd_sync(priv, &cmd);
if (rc)
goto done;
queue_delayed_work(priv->workqueue, &priv->scan_check,
IWL_SCAN_CHECK_WATCHDOG);
mutex_unlock(&priv->mutex);
return;
done:
/* can not perform scan make sure we clear scanning
* bits from status so next scan request can be performed.
* if we dont clear scanning status bit here all next scan
* will fail
*/
clear_bit(STATUS_SCAN_HW, &priv->status);
clear_bit(STATUS_SCANNING, &priv->status);
/* inform mac80211 scan aborted */
queue_work(priv->workqueue, &priv->scan_completed);
mutex_unlock(&priv->mutex);
}
static void iwl3945_bg_up(struct work_struct *data)
{
struct iwl_priv *priv = container_of(data, struct iwl_priv, up);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
mutex_lock(&priv->mutex);
__iwl3945_up(priv);
mutex_unlock(&priv->mutex);
}
static void iwl3945_bg_restart(struct work_struct *data)
{
struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
mutex_lock(&priv->mutex);
priv->vif = NULL;
priv->is_open = 0;
mutex_unlock(&priv->mutex);
iwl3945_down(priv);
ieee80211_restart_hw(priv->hw);
} else {
iwl3945_down(priv);
queue_work(priv->workqueue, &priv->up);
}
}
static void iwl3945_bg_rx_replenish(struct work_struct *data)
{
struct iwl_priv *priv =
container_of(data, struct iwl_priv, rx_replenish);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
mutex_lock(&priv->mutex);
iwl3945_rx_replenish(priv);
mutex_unlock(&priv->mutex);
}
#define IWL_DELAY_NEXT_SCAN (HZ*2)
void iwl3945_post_associate(struct iwl_priv *priv)
{
int rc = 0;
struct ieee80211_conf *conf = NULL;
if (priv->iw_mode == NL80211_IFTYPE_AP) {
IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
return;
}
IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
priv->assoc_id, priv->active_rxon.bssid_addr);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
if (!priv->vif || !priv->is_open)
return;
iwl_scan_cancel_timeout(priv, 200);
conf = ieee80211_get_hw_conf(priv->hw);
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwlcore_commit_rxon(priv);
memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
iwl_setup_rxon_timing(priv);
rc = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
sizeof(priv->rxon_timing), &priv->rxon_timing);
if (rc)
IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
"Attempting to continue.\n");
priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
priv->assoc_id, priv->beacon_int);
if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
else
priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
else
priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
}
iwlcore_commit_rxon(priv);
switch (priv->iw_mode) {
case NL80211_IFTYPE_STATION:
iwl3945_rate_scale_init(priv->hw, IWL_AP_ID);
break;
case NL80211_IFTYPE_ADHOC:
priv->assoc_id = 1;
iwl_add_station(priv, priv->bssid, 0, CMD_SYNC, NULL);
iwl3945_sync_sta(priv, IWL_STA_ID,
(priv->band == IEEE80211_BAND_5GHZ) ?
IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP,
CMD_ASYNC);
iwl3945_rate_scale_init(priv->hw, IWL_STA_ID);
iwl3945_send_beacon_cmd(priv);
break;
default:
IWL_ERR(priv, "%s Should not be called in %d mode\n",
__func__, priv->iw_mode);
break;
}
iwl_activate_qos(priv, 0);
/* we have just associated, don't start scan too early */
priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
}
/*****************************************************************************
*
* mac80211 entry point functions
*
*****************************************************************************/
#define UCODE_READY_TIMEOUT (2 * HZ)
static int iwl3945_mac_start(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
int ret;
IWL_DEBUG_MAC80211(priv, "enter\n");
/* we should be verifying the device is ready to be opened */
mutex_lock(&priv->mutex);
/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
* ucode filename and max sizes are card-specific. */
if (!priv->ucode_code.len) {
ret = iwl3945_read_ucode(priv);
if (ret) {
IWL_ERR(priv, "Could not read microcode: %d\n", ret);
mutex_unlock(&priv->mutex);
goto out_release_irq;
}
}
ret = __iwl3945_up(priv);
mutex_unlock(&priv->mutex);
if (ret)
goto out_release_irq;
IWL_DEBUG_INFO(priv, "Start UP work.\n");
/* Wait for START_ALIVE from ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
ret = wait_event_interruptible_timeout(priv->wait_command_queue,
test_bit(STATUS_READY, &priv->status),
UCODE_READY_TIMEOUT);
if (!ret) {
if (!test_bit(STATUS_READY, &priv->status)) {
IWL_ERR(priv,
"Wait for START_ALIVE timeout after %dms.\n",
jiffies_to_msecs(UCODE_READY_TIMEOUT));
ret = -ETIMEDOUT;
goto out_release_irq;
}
}
/* ucode is running and will send rfkill notifications,
* no need to poll the killswitch state anymore */
cancel_delayed_work(&priv->rfkill_poll);
priv->is_open = 1;
IWL_DEBUG_MAC80211(priv, "leave\n");
return 0;
out_release_irq:
priv->is_open = 0;
IWL_DEBUG_MAC80211(priv, "leave - failed\n");
return ret;
}
static void iwl3945_mac_stop(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
IWL_DEBUG_MAC80211(priv, "enter\n");
if (!priv->is_open) {
IWL_DEBUG_MAC80211(priv, "leave - skip\n");
return;
}
priv->is_open = 0;
if (iwl_is_ready_rf(priv)) {
/* stop mac, cancel any scan request and clear
* RXON_FILTER_ASSOC_MSK BIT
*/
mutex_lock(&priv->mutex);
iwl_scan_cancel_timeout(priv, 100);
mutex_unlock(&priv->mutex);
}
iwl3945_down(priv);
flush_workqueue(priv->workqueue);
/* start polling the killswitch state again */
queue_delayed_work(priv->workqueue, &priv->rfkill_poll,
round_jiffies_relative(2 * HZ));
IWL_DEBUG_MAC80211(priv, "leave\n");
}
static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct iwl_priv *priv = hw->priv;
IWL_DEBUG_MAC80211(priv, "enter\n");
IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
if (iwl3945_tx_skb(priv, skb))
dev_kfree_skb_any(skb);
IWL_DEBUG_MAC80211(priv, "leave\n");
return NETDEV_TX_OK;
}
void iwl3945_config_ap(struct iwl_priv *priv)
{
int rc = 0;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
/* The following should be done only at AP bring up */
if (!(iwl_is_associated(priv))) {
/* RXON - unassoc (to set timing command) */
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwlcore_commit_rxon(priv);
/* RXON Timing */
memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
iwl_setup_rxon_timing(priv);
rc = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
sizeof(priv->rxon_timing),
&priv->rxon_timing);
if (rc)
IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
"Attempting to continue.\n");
/* FIXME: what should be the assoc_id for AP? */
priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
priv->staging_rxon.flags |=
RXON_FLG_SHORT_PREAMBLE_MSK;
else
priv->staging_rxon.flags &=
~RXON_FLG_SHORT_PREAMBLE_MSK;
if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
if (priv->assoc_capability &
WLAN_CAPABILITY_SHORT_SLOT_TIME)
priv->staging_rxon.flags |=
RXON_FLG_SHORT_SLOT_MSK;
else
priv->staging_rxon.flags &=
~RXON_FLG_SHORT_SLOT_MSK;
if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
priv->staging_rxon.flags &=
~RXON_FLG_SHORT_SLOT_MSK;
}
/* restore RXON assoc */
priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
iwlcore_commit_rxon(priv);
iwl_add_station(priv, iwl_bcast_addr, 0, CMD_SYNC, NULL);
}
iwl3945_send_beacon_cmd(priv);
/* FIXME - we need to add code here to detect a totally new
* configuration, reset the AP, unassoc, rxon timing, assoc,
* clear sta table, add BCAST sta... */
}
static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
struct iwl_priv *priv = hw->priv;
const u8 *addr;
int ret = 0;
u8 sta_id = IWL_INVALID_STATION;
u8 static_key;
IWL_DEBUG_MAC80211(priv, "enter\n");
if (iwl3945_mod_params.sw_crypto) {
IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
return -EOPNOTSUPP;
}
addr = sta ? sta->addr : iwl_bcast_addr;
static_key = !iwl_is_associated(priv);
if (!static_key) {
sta_id = iwl_find_station(priv, addr);
if (sta_id == IWL_INVALID_STATION) {
IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
addr);
return -EINVAL;
}
}
mutex_lock(&priv->mutex);
iwl_scan_cancel_timeout(priv, 100);
mutex_unlock(&priv->mutex);
switch (cmd) {
case SET_KEY:
if (static_key)
ret = iwl3945_set_static_key(priv, key);
else
ret = iwl3945_set_dynamic_key(priv, key, sta_id);
IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
break;
case DISABLE_KEY:
if (static_key)
ret = iwl3945_remove_static_key(priv);
else
ret = iwl3945_clear_sta_key_info(priv, sta_id);
IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
break;
default:
ret = -EINVAL;
}
IWL_DEBUG_MAC80211(priv, "leave\n");
return ret;
}
/*****************************************************************************
*
* sysfs attributes
*
*****************************************************************************/
#ifdef CONFIG_IWLWIFI_DEBUG
/*
* The following adds a new attribute to the sysfs representation
* of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
* used for controlling the debug level.
*
* See the level definitions in iwl for details.
*
* The debug_level being managed using sysfs below is a per device debug
* level that is used instead of the global debug level if it (the per
* device debug level) is set.
*/
static ssize_t show_debug_level(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
}
static ssize_t store_debug_level(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct iwl_priv *priv = dev_get_drvdata(d);
unsigned long val;
int ret;
ret = strict_strtoul(buf, 0, &val);
if (ret)
IWL_INFO(priv, "%s is not in hex or decimal form.\n", buf);
else {
priv->debug_level = val;
if (iwl_alloc_traffic_mem(priv))
IWL_ERR(priv,
"Not enough memory to generate traffic log\n");
}
return strnlen(buf, count);
}
static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
show_debug_level, store_debug_level);
#endif /* CONFIG_IWLWIFI_DEBUG */
static ssize_t show_temperature(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
if (!iwl_is_alive(priv))
return -EAGAIN;
return sprintf(buf, "%d\n", iwl3945_hw_get_temperature(priv));
}
static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
static ssize_t show_tx_power(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
}
static ssize_t store_tx_power(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct iwl_priv *priv = dev_get_drvdata(d);
char *p = (char *)buf;
u32 val;
val = simple_strtoul(p, &p, 10);
if (p == buf)
IWL_INFO(priv, ": %s is not in decimal form.\n", buf);
else
iwl3945_hw_reg_set_txpower(priv, val);
return count;
}
static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
static ssize_t show_flags(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
}
static ssize_t store_flags(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct iwl_priv *priv = dev_get_drvdata(d);
u32 flags = simple_strtoul(buf, NULL, 0);
mutex_lock(&priv->mutex);
if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
/* Cancel any currently running scans... */
if (iwl_scan_cancel_timeout(priv, 100))
IWL_WARN(priv, "Could not cancel scan.\n");
else {
IWL_DEBUG_INFO(priv, "Committing rxon.flags = 0x%04X\n",
flags);
priv->staging_rxon.flags = cpu_to_le32(flags);
iwlcore_commit_rxon(priv);
}
}
mutex_unlock(&priv->mutex);
return count;
}
static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
static ssize_t show_filter_flags(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "0x%04X\n",
le32_to_cpu(priv->active_rxon.filter_flags));
}
static ssize_t store_filter_flags(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct iwl_priv *priv = dev_get_drvdata(d);
u32 filter_flags = simple_strtoul(buf, NULL, 0);
mutex_lock(&priv->mutex);
if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
/* Cancel any currently running scans... */
if (iwl_scan_cancel_timeout(priv, 100))
IWL_WARN(priv, "Could not cancel scan.\n");
else {
IWL_DEBUG_INFO(priv, "Committing rxon.filter_flags = "
"0x%04X\n", filter_flags);
priv->staging_rxon.filter_flags =
cpu_to_le32(filter_flags);
iwlcore_commit_rxon(priv);
}
}
mutex_unlock(&priv->mutex);
return count;
}
static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
store_filter_flags);
#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
static ssize_t show_measurement(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
struct iwl_spectrum_notification measure_report;
u32 size = sizeof(measure_report), len = 0, ofs = 0;
u8 *data = (u8 *)&measure_report;
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
if (!(priv->measurement_status & MEASUREMENT_READY)) {
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
memcpy(&measure_report, &priv->measure_report, size);
priv->measurement_status = 0;
spin_unlock_irqrestore(&priv->lock, flags);
while (size && (PAGE_SIZE - len)) {
hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
PAGE_SIZE - len, 1);
len = strlen(buf);
if (PAGE_SIZE - len)
buf[len++] = '\n';
ofs += 16;
size -= min(size, 16U);
}
return len;
}
static ssize_t store_measurement(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct iwl_priv *priv = dev_get_drvdata(d);
struct ieee80211_measurement_params params = {
.channel = le16_to_cpu(priv->active_rxon.channel),
.start_time = cpu_to_le64(priv->last_tsf),
.duration = cpu_to_le16(1),
};
u8 type = IWL_MEASURE_BASIC;
u8 buffer[32];
u8 channel;
if (count) {
char *p = buffer;
strncpy(buffer, buf, min(sizeof(buffer), count));
channel = simple_strtoul(p, NULL, 0);
if (channel)
params.channel = channel;
p = buffer;
while (*p && *p != ' ')
p++;
if (*p)
type = simple_strtoul(p + 1, NULL, 0);
}
IWL_DEBUG_INFO(priv, "Invoking measurement of type %d on "
"channel %d (for '%s')\n", type, params.channel, buf);
iwl3945_get_measurement(priv, &params, type);
return count;
}
static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
show_measurement, store_measurement);
#endif /* CONFIG_IWL3945_SPECTRUM_MEASUREMENT */
static ssize_t store_retry_rate(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct iwl_priv *priv = dev_get_drvdata(d);
priv->retry_rate = simple_strtoul(buf, NULL, 0);
if (priv->retry_rate <= 0)
priv->retry_rate = 1;
return count;
}
static ssize_t show_retry_rate(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "%d", priv->retry_rate);
}
static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate,
store_retry_rate);
static ssize_t show_channels(struct device *d,
struct device_attribute *attr, char *buf)
{
/* all this shit doesn't belong into sysfs anyway */
return 0;
}
static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL);
static ssize_t show_statistics(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
u32 size = sizeof(struct iwl3945_notif_statistics);
u32 len = 0, ofs = 0;
u8 *data = (u8 *)&priv->statistics_39;
int rc = 0;
if (!iwl_is_alive(priv))
return -EAGAIN;
mutex_lock(&priv->mutex);
rc = iwl_send_statistics_request(priv, 0);
mutex_unlock(&priv->mutex);
if (rc) {
len = sprintf(buf,
"Error sending statistics request: 0x%08X\n", rc);
return len;
}
while (size && (PAGE_SIZE - len)) {
hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
PAGE_SIZE - len, 1);
len = strlen(buf);
if (PAGE_SIZE - len)
buf[len++] = '\n';
ofs += 16;
size -= min(size, 16U);
}
return len;
}
static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
static ssize_t show_antenna(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
if (!iwl_is_alive(priv))
return -EAGAIN;
return sprintf(buf, "%d\n", iwl3945_mod_params.antenna);
}
static ssize_t store_antenna(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct iwl_priv *priv __maybe_unused = dev_get_drvdata(d);
int ant;
if (count == 0)
return 0;
if (sscanf(buf, "%1i", &ant) != 1) {
IWL_DEBUG_INFO(priv, "not in hex or decimal form.\n");
return count;
}
if ((ant >= 0) && (ant <= 2)) {
IWL_DEBUG_INFO(priv, "Setting antenna select to %d.\n", ant);
iwl3945_mod_params.antenna = (enum iwl3945_antenna)ant;
} else
IWL_DEBUG_INFO(priv, "Bad antenna select value %d.\n", ant);
return count;
}
static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna);
static ssize_t show_status(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
if (!iwl_is_alive(priv))
return -EAGAIN;
return sprintf(buf, "0x%08x\n", (int)priv->status);
}
static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
static ssize_t dump_error_log(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct iwl_priv *priv = dev_get_drvdata(d);
char *p = (char *)buf;
if (p[0] == '1')
iwl3945_dump_nic_error_log(priv);
return strnlen(buf, count);
}
static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log);
/*****************************************************************************
*
* driver setup and tear down
*
*****************************************************************************/
static void iwl3945_setup_deferred_work(struct iwl_priv *priv)
{
priv->workqueue = create_singlethread_workqueue(DRV_NAME);
init_waitqueue_head(&priv->wait_command_queue);
INIT_WORK(&priv->up, iwl3945_bg_up);
INIT_WORK(&priv->restart, iwl3945_bg_restart);
INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
INIT_DELAYED_WORK(&priv->rfkill_poll, iwl3945_rfkill_poll);
INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
INIT_WORK(&priv->request_scan, iwl3945_bg_request_scan);
INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
iwl3945_hw_setup_deferred_work(priv);
tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
iwl3945_irq_tasklet, (unsigned long)priv);
}
static void iwl3945_cancel_deferred_work(struct iwl_priv *priv)
{
iwl3945_hw_cancel_deferred_work(priv);
cancel_delayed_work_sync(&priv->init_alive_start);
cancel_delayed_work(&priv->scan_check);
cancel_delayed_work(&priv->alive_start);
cancel_work_sync(&priv->beacon_update);
}
static struct attribute *iwl3945_sysfs_entries[] = {
&dev_attr_antenna.attr,
&dev_attr_channels.attr,
&dev_attr_dump_errors.attr,
&dev_attr_flags.attr,
&dev_attr_filter_flags.attr,
#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
&dev_attr_measurement.attr,
#endif
&dev_attr_retry_rate.attr,
&dev_attr_statistics.attr,
&dev_attr_status.attr,
&dev_attr_temperature.attr,
&dev_attr_tx_power.attr,
#ifdef CONFIG_IWLWIFI_DEBUG
&dev_attr_debug_level.attr,
#endif
NULL
};
static struct attribute_group iwl3945_attribute_group = {
.name = NULL, /* put in device directory */
.attrs = iwl3945_sysfs_entries,
};
static struct ieee80211_ops iwl3945_hw_ops = {
.tx = iwl3945_mac_tx,
.start = iwl3945_mac_start,
.stop = iwl3945_mac_stop,
.add_interface = iwl_mac_add_interface,
.remove_interface = iwl_mac_remove_interface,
.config = iwl_mac_config,
.configure_filter = iwl_configure_filter,
.set_key = iwl3945_mac_set_key,
.get_tx_stats = iwl_mac_get_tx_stats,
.conf_tx = iwl_mac_conf_tx,
.reset_tsf = iwl_mac_reset_tsf,
.bss_info_changed = iwl_bss_info_changed,
.hw_scan = iwl_mac_hw_scan
};
static int iwl3945_init_drv(struct iwl_priv *priv)
{
int ret;
struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
priv->retry_rate = 1;
priv->ibss_beacon = NULL;
spin_lock_init(&priv->lock);
spin_lock_init(&priv->sta_lock);
spin_lock_init(&priv->hcmd_lock);
INIT_LIST_HEAD(&priv->free_frames);
mutex_init(&priv->mutex);
/* Clear the driver's (not device's) station table */
iwl_clear_stations_table(priv);
priv->data_retry_limit = -1;
priv->ieee_channels = NULL;
priv->ieee_rates = NULL;
priv->band = IEEE80211_BAND_2GHZ;
priv->iw_mode = NL80211_IFTYPE_STATION;
iwl_reset_qos(priv);
priv->qos_data.qos_active = 0;
priv->qos_data.qos_cap.val = 0;
priv->rates_mask = IWL_RATES_MASK;
priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER;
if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n",
eeprom->version);
ret = -EINVAL;
goto err;
}
ret = iwl_init_channel_map(priv);
if (ret) {
IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
goto err;
}
/* Set up txpower settings in driver for all channels */
if (iwl3945_txpower_set_from_eeprom(priv)) {
ret = -EIO;
goto err_free_channel_map;
}
ret = iwlcore_init_geos(priv);
if (ret) {
IWL_ERR(priv, "initializing geos failed: %d\n", ret);
goto err_free_channel_map;
}
iwl3945_init_hw_rates(priv, priv->ieee_rates);
return 0;
err_free_channel_map:
iwl_free_channel_map(priv);
err:
return ret;
}
static int iwl3945_setup_mac(struct iwl_priv *priv)
{
int ret;
struct ieee80211_hw *hw = priv->hw;
hw->rate_control_algorithm = "iwl-3945-rs";
hw->sta_data_size = sizeof(struct iwl3945_sta_priv);
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM |
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
hw->wiphy->custom_regulatory = true;
/* Firmware does not support this */
hw->wiphy->disable_beacon_hints = true;
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
/* we create the 802.11 header and a zero-length SSID element */
hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&priv->bands[IEEE80211_BAND_2GHZ];
if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&priv->bands[IEEE80211_BAND_5GHZ];
ret = ieee80211_register_hw(priv->hw);
if (ret) {
IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
return ret;
}
priv->mac80211_registered = 1;
return 0;
}
static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int err = 0;
struct iwl_priv *priv;
struct ieee80211_hw *hw;
struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
struct iwl3945_eeprom *eeprom;
unsigned long flags;
/***********************
* 1. Allocating HW data
* ********************/
/* mac80211 allocates memory for this device instance, including
* space for this driver's private structure */
hw = iwl_alloc_all(cfg, &iwl3945_hw_ops);
if (hw == NULL) {
printk(KERN_ERR DRV_NAME "Can not allocate network device\n");
err = -ENOMEM;
goto out;
}
priv = hw->priv;
SET_IEEE80211_DEV(hw, &pdev->dev);
/*
* Disabling hardware scan means that mac80211 will perform scans
* "the hard way", rather than using device's scan.
*/
if (iwl3945_mod_params.disable_hw_scan) {
IWL_DEBUG_INFO(priv, "Disabling hw_scan\n");
iwl3945_hw_ops.hw_scan = NULL;
}
IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
priv->cfg = cfg;
priv->pci_dev = pdev;
priv->inta_mask = CSR_INI_SET_MASK;
#ifdef CONFIG_IWLWIFI_DEBUG
atomic_set(&priv->restrict_refcnt, 0);
#endif
if (iwl_alloc_traffic_mem(priv))
IWL_ERR(priv, "Not enough memory to generate traffic log\n");
/***************************
* 2. Initializing PCI bus
* *************************/
if (pci_enable_device(pdev)) {
err = -ENODEV;
goto out_ieee80211_free_hw;
}
pci_set_master(pdev);
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (!err)
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
IWL_WARN(priv, "No suitable DMA available.\n");
goto out_pci_disable_device;
}
pci_set_drvdata(pdev, priv);
err = pci_request_regions(pdev, DRV_NAME);
if (err)
goto out_pci_disable_device;
/***********************
* 3. Read REV Register
* ********************/
priv->hw_base = pci_iomap(pdev, 0, 0);
if (!priv->hw_base) {
err = -ENODEV;
goto out_pci_release_regions;
}
IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
(unsigned long long) pci_resource_len(pdev, 0));
IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
/* We disable the RETRY_TIMEOUT register (0x41) to keep
* PCI Tx retries from interfering with C3 CPU state */
pci_write_config_byte(pdev, 0x41, 0x00);
/* this spin lock will be used in apm_ops.init and EEPROM access
* we should init now
*/
spin_lock_init(&priv->reg_lock);
/* amp init */
err = priv->cfg->ops->lib->apm_ops.init(priv);
if (err < 0) {
IWL_DEBUG_INFO(priv, "Failed to init the card\n");
goto out_iounmap;
}
/***********************
* 4. Read EEPROM
* ********************/
/* Read the EEPROM */
err = iwl_eeprom_init(priv);
if (err) {
IWL_ERR(priv, "Unable to init EEPROM\n");
goto out_iounmap;
}
/* MAC Address location in EEPROM same for 3945/4965 */
eeprom = (struct iwl3945_eeprom *)priv->eeprom;
memcpy(priv->mac_addr, eeprom->mac_address, ETH_ALEN);
IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->mac_addr);
SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
/***********************
* 5. Setup HW Constants
* ********************/
/* Device-specific setup */
if (iwl3945_hw_set_hw_params(priv)) {
IWL_ERR(priv, "failed to set hw settings\n");
goto out_eeprom_free;
}
/***********************
* 6. Setup priv
* ********************/
err = iwl3945_init_drv(priv);
if (err) {
IWL_ERR(priv, "initializing driver failed\n");
goto out_unset_hw_params;
}
IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n",
priv->cfg->name);
/***********************
* 7. Setup Services
* ********************/
spin_lock_irqsave(&priv->lock, flags);
iwl_disable_interrupts(priv);
spin_unlock_irqrestore(&priv->lock, flags);
pci_enable_msi(priv->pci_dev);
err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
IRQF_SHARED, DRV_NAME, priv);
if (err) {
IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
goto out_disable_msi;
}
err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group);
if (err) {
IWL_ERR(priv, "failed to create sysfs device attributes\n");
goto out_release_irq;
}
iwl_set_rxon_channel(priv,
&priv->bands[IEEE80211_BAND_2GHZ].channels[5]);
iwl3945_setup_deferred_work(priv);
iwl3945_setup_rx_handlers(priv);
/*********************************
* 8. Setup and Register mac80211
* *******************************/
iwl_enable_interrupts(priv);
err = iwl3945_setup_mac(priv);
if (err)
goto out_remove_sysfs;
err = iwl_dbgfs_register(priv, DRV_NAME);
if (err)
IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
/* Start monitoring the killswitch */
queue_delayed_work(priv->workqueue, &priv->rfkill_poll,
2 * HZ);
return 0;
out_remove_sysfs:
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
out_release_irq:
free_irq(priv->pci_dev->irq, priv);
out_disable_msi:
pci_disable_msi(priv->pci_dev);
iwlcore_free_geos(priv);
iwl_free_channel_map(priv);
out_unset_hw_params:
iwl3945_unset_hw_params(priv);
out_eeprom_free:
iwl_eeprom_free(priv);
out_iounmap:
pci_iounmap(pdev, priv->hw_base);
out_pci_release_regions:
pci_release_regions(pdev);
out_pci_disable_device:
pci_set_drvdata(pdev, NULL);
pci_disable_device(pdev);
out_ieee80211_free_hw:
iwl_free_traffic_mem(priv);
ieee80211_free_hw(priv->hw);
out:
return err;
}
static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
{
struct iwl_priv *priv = pci_get_drvdata(pdev);
unsigned long flags;
if (!priv)
return;
IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
iwl_dbgfs_unregister(priv);
set_bit(STATUS_EXIT_PENDING, &priv->status);
if (priv->mac80211_registered) {
ieee80211_unregister_hw(priv->hw);
priv->mac80211_registered = 0;
} else {
iwl3945_down(priv);
}
/* make sure we flush any pending irq or
* tasklet for the driver
*/
spin_lock_irqsave(&priv->lock, flags);
iwl_disable_interrupts(priv);
spin_unlock_irqrestore(&priv->lock, flags);
iwl_synchronize_irq(priv);
sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
cancel_delayed_work_sync(&priv->rfkill_poll);
iwl3945_dealloc_ucode_pci(priv);
if (priv->rxq.bd)
iwl3945_rx_queue_free(priv, &priv->rxq);
iwl3945_hw_txq_ctx_free(priv);
iwl3945_unset_hw_params(priv);
iwl_clear_stations_table(priv);
/*netif_stop_queue(dev); */
flush_workqueue(priv->workqueue);
/* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
* priv->workqueue... so we can't take down the workqueue
* until now... */
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
iwl_free_traffic_mem(priv);
free_irq(pdev->irq, priv);
pci_disable_msi(pdev);
pci_iounmap(pdev, priv->hw_base);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
iwl_free_channel_map(priv);
iwlcore_free_geos(priv);
kfree(priv->scan);
if (priv->ibss_beacon)
dev_kfree_skb(priv->ibss_beacon);
ieee80211_free_hw(priv->hw);
}
/*****************************************************************************
*
* driver and module entry point
*
*****************************************************************************/
static struct pci_driver iwl3945_driver = {
.name = DRV_NAME,
.id_table = iwl3945_hw_card_ids,
.probe = iwl3945_pci_probe,
.remove = __devexit_p(iwl3945_pci_remove),
#ifdef CONFIG_PM
.suspend = iwl_pci_suspend,
.resume = iwl_pci_resume,
#endif
};
static int __init iwl3945_init(void)
{
int ret;
printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
ret = iwl3945_rate_control_register();
if (ret) {
printk(KERN_ERR DRV_NAME
"Unable to register rate control algorithm: %d\n", ret);
return ret;
}
ret = pci_register_driver(&iwl3945_driver);
if (ret) {
printk(KERN_ERR DRV_NAME "Unable to initialize PCI module\n");
goto error_register;
}
return ret;
error_register:
iwl3945_rate_control_unregister();
return ret;
}
static void __exit iwl3945_exit(void)
{
pci_unregister_driver(&iwl3945_driver);
iwl3945_rate_control_unregister();
}
MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
module_param_named(antenna, iwl3945_mod_params.antenna, int, 0444);
MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, 0444);
MODULE_PARM_DESC(swcrypto,
"using software crypto (default 1 [software])\n");
#ifdef CONFIG_IWLWIFI_DEBUG
module_param_named(debug, iwl_debug_level, uint, 0644);
MODULE_PARM_DESC(debug, "debug output mask");
#endif
module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, int, 0444);
MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, 0444);
MODULE_PARM_DESC(fw_restart3945, "restart firmware in case of error");
module_exit(iwl3945_exit);
module_init(iwl3945_init);