Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
[NET]: Fix more per-cpu typos
[SECURITY]: Fix build with CONFIG_SECURITY disabled.
[I/OAT]: Remove CPU hotplug lock from net_dma_rebalance
[DECNET]: Fix for routing bug
[AF_UNIX]: Kernel memory leak fix for af_unix datagram getpeersec patch
[NET]: skb_queue_lock_key() is no longer used.
[NET]: Remove lockdep_set_class() call from skb_queue_head_init().
[IPV6]: SNMPv2 "ipv6IfStatsOutFragCreates" counter error
[IPV6]: SNMPv2 "ipv6IfStatsInHdrErrors" counter error
[NET]: Kill the WARN_ON() calls for checksum fixups.
[NETFILTER]: xt_hashlimit/xt_string: missing string validation
[NETFILTER]: SIP helper: expect RTP streams in both directions
[E1000]: Convert to netdev_alloc_skb
[TG3]: Convert to netdev_alloc_skb
[NET]: Add netdev_alloc_skb().
[TCP]: Process linger2 timeout consistently.
[SECURITY] secmark: nul-terminate secdata
[NET] infiniband: Cleanup ib_addr module to use the netevents
[NET]: Core net changes to generate netevents
[NET]: Network Event Notifier Mechanism.
...
diff --git a/.gitignore b/.gitignore
index 27fd376..b1f5b9d 100644
--- a/.gitignore
+++ b/.gitignore
@@ -30,6 +30,11 @@
include/linux/autoconf.h
include/linux/compile.h
include/linux/version.h
+include/linux/utsrelease.h
# stgit generated dirs
patches-*
+
+# quilt's files
+patches
+series
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index f86550f..22c5331 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -59,7 +59,7 @@
would issue more ioctls to the device to communicate to it using
control, bulk, or other kinds of USB transfers. The IOCTLs are
listed in the <linux/usbdevice_fs.h> file, and at this writing the
-source code (linux/drivers/usb/devio.c) is the primary reference
+source code (linux/drivers/usb/core/devio.c) is the primary reference
for how to access devices through those files.
Note that since by default these BBB/DDD files are writable only by
diff --git a/Documentation/usb/usb-help.txt b/Documentation/usb/usb-help.txt
index b7c3249..a740859 100644
--- a/Documentation/usb/usb-help.txt
+++ b/Documentation/usb/usb-help.txt
@@ -5,8 +5,7 @@
Documentation/usb/*, see the following:
Linux-USB project: http://www.linux-usb.org
- mirrors at http://www.suse.cz/development/linux-usb/
- and http://usb.in.tum.de/linux-usb/
+ mirrors at http://usb.in.tum.de/linux-usb/
and http://it.linux-usb.org
Linux USB Guide: http://linux-usb.sourceforge.net
Linux-USB device overview (working devices and drivers):
diff --git a/Makefile b/Makefile
index c9b7dbb..110db85 100644
--- a/Makefile
+++ b/Makefile
@@ -310,8 +310,8 @@
CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common
# Force gcc to behave correct even for buggy distributions
-CFLAGS += $(call cc-option, -fno-stack-protector-all \
- -fno-stack-protector)
+CFLAGS += $(call cc-option, -fno-stack-protector)
+
AFLAGS := -D__ASSEMBLY__
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -368,6 +368,7 @@
no-dot-config-targets := clean mrproper distclean \
cscope TAGS tags help %docs check% \
+ include/linux/version.h headers_% \
kernelrelease kernelversion
config-targets := 0
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index f3c1ebf..f3e020f 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -95,7 +95,8 @@
}
#endif
-static struct irqchip gic_chip = {
+static struct irq_chip gic_chip = {
+ .name = "GIC",
.ack = gic_ack_irq,
.mask = gic_mask_irq,
.unmask = gic_unmask_irq,
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 04de83f..4e0dcae 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -204,7 +204,8 @@
locomo_writel(r, mapbase + LOCOMO_ICR);
}
-static struct irqchip locomo_chip = {
+static struct irq_chip locomo_chip = {
+ .name = "LOCOMO",
.ack = locomo_ack_irq,
.mask = locomo_mask_irq,
.unmask = locomo_unmask_irq,
@@ -249,7 +250,8 @@
locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
}
-static struct irqchip locomo_key_chip = {
+static struct irq_chip locomo_key_chip = {
+ .name = "LOCOMO-key",
.ack = locomo_key_ack_irq,
.mask = locomo_key_mask_irq,
.unmask = locomo_key_unmask_irq,
@@ -312,7 +314,8 @@
locomo_writel(r, mapbase + LOCOMO_GIE);
}
-static struct irqchip locomo_gpio_chip = {
+static struct irq_chip locomo_gpio_chip = {
+ .name = "LOCOMO-gpio",
.ack = locomo_gpio_ack_irq,
.mask = locomo_gpio_mask_irq,
.unmask = locomo_gpio_unmask_irq,
@@ -357,7 +360,8 @@
locomo_writel(r, mapbase + LOCOMO_LTINT);
}
-static struct irqchip locomo_lt_chip = {
+static struct irq_chip locomo_lt_chip = {
+ .name = "LOCOMO-lt",
.ack = locomo_lt_ack_irq,
.mask = locomo_lt_mask_irq,
.unmask = locomo_lt_unmask_irq,
@@ -418,7 +422,8 @@
locomo_writel(r, mapbase + LOCOMO_SPIIE);
}
-static struct irqchip locomo_spi_chip = {
+static struct irq_chip locomo_spi_chip = {
+ .name = "LOCOMO-spi",
.ack = locomo_spi_ack_irq,
.mask = locomo_spi_mask_irq,
.unmask = locomo_spi_unmask_irq,
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 1cdb26a..a331c12 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -272,7 +272,8 @@
return 0;
}
-static struct irqchip sa1111_low_chip = {
+static struct irq_chip sa1111_low_chip = {
+ .name = "SA1111-l",
.ack = sa1111_ack_irq,
.mask = sa1111_mask_lowirq,
.unmask = sa1111_unmask_lowirq,
@@ -368,7 +369,8 @@
return 0;
}
-static struct irqchip sa1111_high_chip = {
+static struct irq_chip sa1111_high_chip = {
+ .name = "SA1111-h",
.ack = sa1111_ack_irq,
.mask = sa1111_mask_highirq,
.unmask = sa1111_unmask_highirq,
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index a19bc4a..43d2781 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -39,7 +39,8 @@
writel(1 << irq, base + VIC_INT_ENABLE);
}
-static struct irqchip vic_chip = {
+static struct irq_chip vic_chip = {
+ .name = "VIC",
.ack = vic_mask_irq,
.mask = vic_mask_irq,
.unmask = vic_unmask_irq,
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index b9a74a7..eca248d 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -470,7 +470,8 @@
}
}
-static struct irqchip ecard_chip = {
+static struct irq_chip ecard_chip = {
+ .name = "ECARD",
.ack = ecard_irq_mask,
.mask = ecard_irq_mask,
.unmask = ecard_irq_unmask,
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 626feeec..2e1bf83 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -77,6 +77,7 @@
seq_printf(p, "%3d: ", i);
for_each_present_cpu(cpu)
seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+ seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
seq_printf(p, " %s", action->name);
for (action = action->next; action; action = action->next)
seq_printf(p, ", %s", action->name);
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index 5783c28..cec199f 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -327,7 +327,8 @@
return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
}
-static struct irqchip gpio_irqchip = {
+static struct irq_chip gpio_irqchip = {
+ .name = "GPIO",
.mask = gpio_irq_mask,
.unmask = gpio_irq_unmask,
.set_type = gpio_irq_type,
diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c
index 9b09113..c3a5e77 100644
--- a/arch/arm/mach-at91rm9200/irq.c
+++ b/arch/arm/mach-at91rm9200/irq.c
@@ -114,7 +114,8 @@
#define at91_aic_set_wake NULL
#endif
-static struct irqchip at91_aic_chip = {
+static struct irq_chip at91_aic_chip = {
+ .name = "AIC",
.ack = at91_aic_mask_irq,
.mask = at91_aic_mask_irq,
.unmask = at91_aic_unmask_irq,
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index a5de5f1..2688bd8 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -204,13 +204,15 @@
imx_gpio_handler(mask, irq, desc, regs);
}
-static struct irqchip imx_internal_chip = {
+static struct irq_chip imx_internal_chip = {
+ .name = "MPU",
.ack = imx_mask_irq,
.mask = imx_mask_irq,
.unmask = imx_unmask_irq,
};
-static struct irqchip imx_gpio_chip = {
+static struct irq_chip imx_gpio_chip = {
+ .name = "GPIO",
.ack = imx_gpio_ack_irq,
.mask = imx_gpio_mask_irq,
.unmask = imx_gpio_unmask_irq,
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 6d65c96..191c57a 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -161,7 +161,8 @@
writel(1 << irq, VA_IC_BASE + IRQ_ENABLE_SET);
}
-static struct irqchip sc_chip = {
+static struct irq_chip sc_chip = {
+ .name = "SC",
.ack = sc_mask_irq,
.mask = sc_mask_irq,
.unmask = sc_unmask_irq,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 9f55f5a..678b6ba 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -156,7 +156,8 @@
cic_writel(1 << irq, INTCP_VA_CIC_BASE + IRQ_ENABLE_SET);
}
-static struct irqchip cic_chip = {
+static struct irq_chip cic_chip = {
+ .name = "CIC",
.ack = cic_mask_irq,
.mask = cic_mask_irq,
.unmask = cic_unmask_irq,
@@ -174,7 +175,8 @@
pic_writel(1 << irq, INTCP_VA_PIC_BASE + IRQ_ENABLE_SET);
}
-static struct irqchip pic_chip = {
+static struct irq_chip pic_chip = {
+ .name = "PIC",
.ack = pic_mask_irq,
.mask = pic_mask_irq,
.unmask = pic_unmask_irq,
@@ -192,7 +194,8 @@
sic_writel(1 << irq, INTCP_VA_SIC_BASE + IRQ_ENABLE_SET);
}
-static struct irqchip sic_chip = {
+static struct irq_chip sic_chip = {
+ .name = "SIC",
.ack = sic_mask_irq,
.mask = sic_mask_irq,
.unmask = sic_unmask_irq,
diff --git a/arch/arm/mach-iop3xx/iop321-irq.c b/arch/arm/mach-iop3xx/iop321-irq.c
index d42aae6..88ac333 100644
--- a/arch/arm/mach-iop3xx/iop321-irq.c
+++ b/arch/arm/mach-iop3xx/iop321-irq.c
@@ -52,7 +52,8 @@
intctl_write(iop321_mask);
}
-struct irqchip ext_chip = {
+struct irq_chip ext_chip = {
+ .name = "IOP",
.ack = iop321_irq_mask,
.mask = iop321_irq_mask,
.unmask = iop321_irq_unmask,
diff --git a/arch/arm/mach-iop3xx/iop331-irq.c b/arch/arm/mach-iop3xx/iop331-irq.c
index f4d4321..cab1172 100644
--- a/arch/arm/mach-iop3xx/iop331-irq.c
+++ b/arch/arm/mach-iop3xx/iop331-irq.c
@@ -77,13 +77,15 @@
intctl_write1(iop331_mask1);
}
-struct irqchip iop331_irqchip1 = {
+struct irq_chip iop331_irqchip1 = {
+ .name = "IOP-1",
.ack = iop331_irq_mask1,
.mask = iop331_irq_mask1,
.unmask = iop331_irq_unmask1,
};
-struct irqchip iop331_irqchip2 = {
+struct irq_chip iop331_irqchip2 = {
+ .name = "IOP-2",
.ack = iop331_irq_mask2,
.mask = iop331_irq_mask2,
.unmask = iop331_irq_unmask2,
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 2cccc27..4f2ab48 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -63,7 +63,8 @@
CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask;
}
-static struct irqchip kev7a400_cpld_chip = {
+static struct irq_chip kev7a400_cpld_chip = {
+ .name = "CPLD",
.ack = kev7a400_ack_cpld_irq,
.mask = kev7a400_mask_cpld_irq,
.unmask = kev7a400_unmask_cpld_irq,
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index 35c3606..a691011 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -200,7 +200,8 @@
}
}
-static struct irqchip lpd7a40x_cpld_chip = {
+static struct irq_chip lpd7a40x_cpld_chip = {
+ .name = "CPLD",
.ack = lh7a40x_ack_cpld_irq,
.mask = lh7a40x_mask_cpld_irq,
.unmask = lh7a40x_unmask_cpld_irq,
diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c
index 8535764..f9b3fe9 100644
--- a/arch/arm/mach-lh7a40x/irq-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-kev7a400.c
@@ -43,7 +43,8 @@
}
static struct
-irqchip lh7a400_cpld_chip = {
+irq_chip lh7a400_cpld_chip = {
+ .name = "CPLD",
.ack = lh7a400_ack_cpld_irq,
.mask = lh7a400_mask_cpld_irq,
.unmask = lh7a400_unmask_cpld_irq,
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
index f9fdefe..091b2dc 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c
@@ -38,13 +38,15 @@
INTC_INTENC = (1 << irq);
}
-static struct irqchip lh7a400_internal_chip = {
+static struct irq_chip lh7a400_internal_chip = {
+ .name = "MPU",
.ack = lh7a400_mask_irq, /* Level triggering -> mask is ack */
.mask = lh7a400_mask_irq,
.unmask = lh7a400_unmask_irq,
};
-static struct irqchip lh7a400_gpio_chip = {
+static struct irq_chip lh7a400_gpio_chip = {
+ .name = "GPIO",
.ack = lh7a400_ack_gpio_irq,
.mask = lh7a400_mask_irq,
.unmask = lh7a400_unmask_irq,
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index 2685a81..7059b98 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -76,25 +76,29 @@
VIC2_INTENCLR = (1 << irq);
}
-static struct irqchip lh7a404_vic1_chip = {
+static struct irq_chip lh7a404_vic1_chip = {
+ .name = "VIC1",
.ack = lh7a404_vic1_mask_irq, /* Because level-triggered */
.mask = lh7a404_vic1_mask_irq,
.unmask = lh7a404_vic1_unmask_irq,
};
-static struct irqchip lh7a404_vic2_chip = {
+static struct irq_chip lh7a404_vic2_chip = {
+ .name = "VIC2",
.ack = lh7a404_vic2_mask_irq, /* Because level-triggered */
.mask = lh7a404_vic2_mask_irq,
.unmask = lh7a404_vic2_unmask_irq,
};
-static struct irqchip lh7a404_gpio_vic1_chip = {
+static struct irq_chip lh7a404_gpio_vic1_chip = {
+ .name = "GPIO-VIC1",
.ack = lh7a404_vic1_ack_gpio_irq,
.mask = lh7a404_vic1_mask_irq,
.unmask = lh7a404_vic1_unmask_irq,
};
-static struct irqchip lh7a404_gpio_vic2_chip = {
+static struct irq_chip lh7a404_gpio_vic2_chip = {
+ .name = "GPIO-VIC2",
.ack = lh7a404_vic2_ack_gpio_irq,
.mask = lh7a404_vic2_mask_irq,
.unmask = lh7a404_vic2_unmask_irq,
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index dcb4e17..d6055dd 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -50,7 +50,8 @@
}
}
-static struct irqchip lh7a40x_cpld_chip = {
+static struct irq_chip lh7a40x_cpld_chip = {
+ .name = "CPLD",
.ack = lh7a40x_ack_cpld_irq,
.mask = lh7a40x_mask_cpld_irq,
.unmask = lh7a40x_unmask_cpld_irq,
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 34eb79e..efe9bfc 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -106,14 +106,16 @@
}
}
-static struct irqchip omap_fpga_irq_ack = {
+static struct irq_chip omap_fpga_irq_ack = {
+ .name = "FPGA-ack",
.ack = fpga_mask_ack_irq,
.mask = fpga_mask_irq,
.unmask = fpga_unmask_irq,
};
-static struct irqchip omap_fpga_irq = {
+static struct irq_chip omap_fpga_irq = {
+ .name = "FPGA",
.ack = fpga_ack_irq,
.mask = fpga_mask_irq,
.unmask = fpga_unmask_irq,
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 9e03984..3ea140b 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -168,7 +168,8 @@
};
#endif
-static struct irqchip omap_irq_chip = {
+static struct irq_chip omap_irq_chip = {
+ .name = "MPU",
.ack = omap_mask_ack_irq,
.mask = omap_mask_irq,
.unmask = omap_unmask_irq,
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3eed6a7..dfc3b35 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -94,7 +94,8 @@
omap_ack_irq(irq);
}
-static struct irqchip omap_irq_chip = {
+static struct irq_chip omap_irq_chip = {
+ .name = "INTC",
.ack = omap_mask_ack_irq,
.mask = omap_mask_irq,
.unmask = omap_unmask_irq,
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index d9635ff..12141e2 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -39,7 +39,8 @@
ICMR |= (1 << (irq + PXA_IRQ_SKIP));
}
-static struct irqchip pxa_internal_chip_low = {
+static struct irq_chip pxa_internal_chip_low = {
+ .name = "SC",
.ack = pxa_mask_low_irq,
.mask = pxa_mask_low_irq,
.unmask = pxa_unmask_low_irq,
@@ -61,7 +62,8 @@
ICMR2 |= (1 << (irq - 32 + PXA_IRQ_SKIP));
}
-static struct irqchip pxa_internal_chip_high = {
+static struct irq_chip pxa_internal_chip_high = {
+ .name = "SC-hi",
.ack = pxa_mask_high_irq,
.mask = pxa_mask_high_irq,
.unmask = pxa_unmask_high_irq,
@@ -129,7 +131,8 @@
GEDR0 = (1 << (irq - IRQ_GPIO0));
}
-static struct irqchip pxa_low_gpio_chip = {
+static struct irq_chip pxa_low_gpio_chip = {
+ .name = "GPIO-l",
.ack = pxa_ack_low_gpio,
.mask = pxa_mask_low_irq,
.unmask = pxa_unmask_low_irq,
@@ -237,7 +240,8 @@
GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
}
-static struct irqchip pxa_muxed_gpio_chip = {
+static struct irq_chip pxa_muxed_gpio_chip = {
+ .name = "GPIO",
.ack = pxa_ack_muxed_gpio,
.mask = pxa_mask_muxed_gpio,
.unmask = pxa_unmask_muxed_gpio,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1a5f5c2..12479ae 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -68,7 +68,8 @@
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
}
-static struct irqchip lpd270_irq_chip = {
+static struct irq_chip lpd270_irq_chip = {
+ .name = "CPLD",
.ack = lpd270_mask_irq,
.mask = lpd270_mask_irq,
.unmask = lpd270_unmask_irq,
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 6a9a669..83ff5ce 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -78,7 +78,8 @@
LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
}
-static struct irqchip lubbock_irq_chip = {
+static struct irq_chip lubbock_irq_chip = {
+ .name = "FPGA",
.ack = lubbock_mask_irq,
.mask = lubbock_mask_irq,
.unmask = lubbock_unmask_irq,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 21ddf3d..a7e9b96 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -64,7 +64,8 @@
MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
}
-static struct irqchip mainstone_irq_chip = {
+static struct irq_chip mainstone_irq_chip = {
+ .name = "FPGA",
.ack = mainstone_mask_irq,
.mask = mainstone_mask_irq,
.unmask = mainstone_unmask_irq,
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 2891b8c..b55b90a 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -95,7 +95,8 @@
return 0;
}
-static struct irqchip sa1100_low_gpio_chip = {
+static struct irq_chip sa1100_low_gpio_chip = {
+ .name = "GPIO-l",
.ack = sa1100_low_gpio_ack,
.mask = sa1100_low_gpio_mask,
.unmask = sa1100_low_gpio_unmask,
@@ -178,7 +179,8 @@
return 0;
}
-static struct irqchip sa1100_high_gpio_chip = {
+static struct irq_chip sa1100_high_gpio_chip = {
+ .name = "GPIO-h",
.ack = sa1100_high_gpio_ack,
.mask = sa1100_high_gpio_mask,
.unmask = sa1100_high_gpio_unmask,
@@ -215,7 +217,8 @@
return -EINVAL;
}
-static struct irqchip sa1100_normal_chip = {
+static struct irq_chip sa1100_normal_chip = {
+ .name = "SC",
.ack = sa1100_mask_irq,
.mask = sa1100_mask_irq,
.unmask = sa1100_unmask_irq,
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
index 6cb67bd..b227052 100644
--- a/arch/arm/mach-shark/irq.c
+++ b/arch/arm/mach-shark/irq.c
@@ -69,7 +69,8 @@
static struct irqaction cascade;
-static struct irqchip fb_chip = {
+static struct irq_chip fb_chip = {
+ .name = "XT-PIC",
.ack = shark_ack_8259A_irq,
.mask = shark_disable_8259A_irq,
.unmask = shark_enable_8259A_irq,
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 8643771..c4e3f8c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -69,7 +69,8 @@
writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET);
}
-static struct irqchip sic_chip = {
+static struct irq_chip sic_chip = {
+ .name = "SIC",
.ack = sic_mask_irq,
.mask = sic_mask_irq,
.unmask = sic_unmask_irq,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index fec7970..cd7f973 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -944,7 +944,8 @@
_set_gpio_irqenable(bank, gpio, 1);
}
-static struct irqchip gpio_irq_chip = {
+static struct irq_chip gpio_irq_chip = {
+ .name = "GPIO",
.ack = gpio_ack_irq,
.mask = gpio_mask_irq,
.unmask = gpio_unmask_irq,
@@ -952,10 +953,11 @@
.set_wake = gpio_wake_enable,
};
-static struct irqchip mpuio_irq_chip = {
+static struct irq_chip mpuio_irq_chip = {
+ .name = "MPUIO",
.ack = mpuio_ack_irq,
.mask = mpuio_mask_irq,
- .unmask = mpuio_unmask_irq
+ .unmask = mpuio_unmask_irq
};
static int initialized;
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index d464dde..6f81042 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -513,6 +513,7 @@
swapgs
1: incl %gs:pda_irqcount # RED-PEN should check preempt count
cmoveq %gs:pda_irqstackptr,%rsp
+ push %rbp # backlink for old unwinder
/*
* We entered an interrupt context - irqs are off:
*/
@@ -1139,18 +1140,21 @@
END(machine_check)
#endif
+/* Call softirq on interrupt stack. Interrupts are off. */
ENTRY(call_softirq)
CFI_STARTPROC
- movq %gs:pda_irqstackptr,%rax
- movq %rsp,%rdx
- CFI_DEF_CFA_REGISTER rdx
+ push %rbp
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rbp,0
+ mov %rsp,%rbp
+ CFI_DEF_CFA_REGISTER rbp
incl %gs:pda_irqcount
- cmove %rax,%rsp
- pushq %rdx
- /*todo CFI_DEF_CFA_EXPRESSION ...*/
+ cmove %gs:pda_irqstackptr,%rsp
+ push %rbp # backlink for old unwinder
call __do_softirq
- popq %rsp
+ leaveq
CFI_DEF_CFA_REGISTER rsp
+ CFI_ADJUST_CFA_OFFSET -8
decl %gs:pda_irqcount
ret
CFI_ENDPROC
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c
index c4c3cc3..aad7609 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@@ -92,5 +92,7 @@
{
if (dma_ops)
return;
+
+ force_iommu = 0; /* no HW IOMMU */
dma_ops = &nommu_dma_ops;
}
diff --git a/drivers/scsi/aic7xxx/aicasm/Makefile b/drivers/scsi/aic7xxx/aicasm/Makefile
index 8c91fda..b98c5c1 100644
--- a/drivers/scsi/aic7xxx/aicasm/Makefile
+++ b/drivers/scsi/aic7xxx/aicasm/Makefile
@@ -14,6 +14,8 @@
clean-files:= ${GENSRCS} ${GENHDRS} $(YSRCS:.y=.output) $(PROG)
# Override default kernel CFLAGS. This is a userland app.
AICASM_CFLAGS:= -I/usr/include -I.
+LEX= flex
+YACC= bison
YFLAGS= -d
NOMAN= noman
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 2ee742d..0050431 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -24,7 +24,7 @@
default y if ARCH_S3C2410
default y if PXA27x
default y if ARCH_EP93XX
- default y if ARCH_AT91RM9200
+ default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
# PPC:
default y if STB03xxx
default y if PPC_MPC52xx
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index f7bdd94..218621b 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -517,19 +517,19 @@
static struct usb_device *usbdev_lookup_minor(int minor)
{
- struct device *device;
- struct usb_device *udev = NULL;
+ struct class_device *class_dev;
+ struct usb_device *dev = NULL;
down(&usb_device_class->sem);
- list_for_each_entry(device, &usb_device_class->devices, node) {
- if (device->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
- udev = device->platform_data;
+ list_for_each_entry(class_dev, &usb_device_class->children, node) {
+ if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
+ dev = class_dev->class_data;
break;
}
}
up(&usb_device_class->sem);
- return udev;
+ return dev;
};
/*
@@ -1580,16 +1580,16 @@
{
int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1);
- dev->usbfs_dev = device_create(usb_device_class, &dev->dev,
- MKDEV(USB_DEVICE_MAJOR, minor),
+ dev->class_dev = class_device_create(usb_device_class, NULL,
+ MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev,
"usbdev%d.%d", dev->bus->busnum, dev->devnum);
- dev->usbfs_dev->platform_data = dev;
+ dev->class_dev->class_data = dev;
}
static void usbdev_remove(struct usb_device *dev)
{
- device_unregister(dev->usbfs_dev);
+ class_device_unregister(dev->class_dev);
}
static int usbdev_notify(struct notifier_block *self, unsigned long action,
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index abee0f5..8de4f8c 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -194,13 +194,14 @@
++temp;
else
temp = name;
- intf->usb_dev = device_create(usb_class->class, &intf->dev,
- MKDEV(USB_MAJOR, minor), "%s", temp);
- if (IS_ERR(intf->usb_dev)) {
+ intf->class_dev = class_device_create(usb_class->class, NULL,
+ MKDEV(USB_MAJOR, minor),
+ &intf->dev, "%s", temp);
+ if (IS_ERR(intf->class_dev)) {
spin_lock (&minor_lock);
usb_minors[intf->minor] = NULL;
spin_unlock (&minor_lock);
- retval = PTR_ERR(intf->usb_dev);
+ retval = PTR_ERR(intf->class_dev);
}
exit:
return retval;
@@ -241,8 +242,8 @@
spin_unlock (&minor_lock);
snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base);
- device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
- intf->usb_dev = NULL;
+ class_device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
+ intf->class_dev = NULL;
intf->minor = -1;
destroy_usb_class();
}
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 363b2ad..1a32d96 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -207,7 +207,7 @@
config USB_GADGET_DUMMY_HCD
boolean "Dummy HCD (DEVELOPMENT)"
- depends on USB && EXPERIMENTAL
+ depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL
select USB_GADGET_DUALSPEED
help
This host controller driver emulates USB, looping all data transfer
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 1c459ff..cfebca0 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -57,19 +57,23 @@
/*
* This controller is simple and PIO-only. It's used in many AT91-series
- * ARMv4T controllers, including the at91rm9200 (arm920T, with MMU),
- * at91sam9261 (arm926ejs, with MMU), and several no-mmu versions.
+ * full speed USB controllers, including the at91rm9200 (arm920T, with MMU),
+ * at91sam926x (arm926ejs, with MMU), and several no-mmu versions.
*
* This driver expects the board has been wired with two GPIOs suppporting
* a VBUS sensing IRQ, and a D+ pullup. (They may be omitted, but the
- * testing hasn't covered such cases.) The pullup is most important; it
+ * testing hasn't covered such cases.)
+ *
+ * The pullup is most important (so it's integrated on sam926x parts). It
* provides software control over whether the host enumerates the device.
+ *
* The VBUS sensing helps during enumeration, and allows both USB clocks
* (and the transceiver) to stay gated off until they're necessary, saving
- * power. During USB suspend, the 48 MHz clock is gated off.
+ * power. During USB suspend, the 48 MHz clock is gated off in hardware;
+ * it may also be gated off by software during some Linux sleep states.
*/
-#define DRIVER_VERSION "8 March 2005"
+#define DRIVER_VERSION "3 May 2006"
static const char driver_name [] = "at91_udc";
static const char ep0name[] = "ep0";
@@ -316,9 +320,15 @@
*
* There are also state bits like FORCESTALL, EPEDS, DIR, and EPTYPE
* that shouldn't normally be changed.
+ *
+ * NOTE at91sam9260 docs mention synch between UDPCK and MCK clock domains,
+ * implying a need to wait for one write to complete (test relevant bits)
+ * before starting the next write. This shouldn't be an issue given how
+ * infrequently we write, except maybe for write-then-read idioms.
*/
#define SET_FX (AT91_UDP_TXPKTRDY)
-#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)
+#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP \
+ | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)
/* pull OUT packet data from the endpoint's fifo */
static int read_fifo (struct at91_ep *ep, struct at91_request *req)
@@ -472,7 +482,8 @@
/*-------------------------------------------------------------------------*/
-static int at91_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+static int at91_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
{
struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
struct at91_udc *dev = ep->udc;
@@ -582,11 +593,12 @@
* interesting for request or buffer allocation.
*/
-static struct usb_request *at91_ep_alloc_request (struct usb_ep *_ep, unsigned int gfp_flags)
+static struct usb_request *
+at91_ep_alloc_request(struct usb_ep *_ep, unsigned int gfp_flags)
{
struct at91_request *req;
- req = kcalloc(1, sizeof (struct at91_request), SLAB_KERNEL);
+ req = kcalloc(1, sizeof (struct at91_request), gfp_flags);
if (!req)
return NULL;
@@ -862,6 +874,7 @@
if (udc->gadget.speed == USB_SPEED_UNKNOWN)
driver = NULL;
udc->gadget.speed = USB_SPEED_UNKNOWN;
+ udc->suspended = 0;
for (i = 0; i < NUM_ENDPOINTS; i++) {
struct at91_ep *ep = &udc->ep[i];
@@ -889,8 +902,8 @@
return;
udc->clocked = 0;
udc->gadget.speed = USB_SPEED_UNKNOWN;
- clk_disable(udc->iclk);
clk_disable(udc->fclk);
+ clk_disable(udc->iclk);
}
/*
@@ -911,9 +924,6 @@
at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
at91_set_gpio_value(udc->board.pullup_pin, 0);
clk_off(udc);
-
- // REVISIT: with transceiver disabled, will D- float
- // so that a host would falsely detect a device?
}
}
@@ -1290,7 +1300,8 @@
if (udc->wait_for_addr_ack) {
u32 tmp;
- at91_udp_write(AT91_UDP_FADDR, AT91_UDP_FEN | udc->addr);
+ at91_udp_write(AT91_UDP_FADDR,
+ AT91_UDP_FEN | udc->addr);
tmp = at91_udp_read(AT91_UDP_GLB_STAT);
tmp &= ~AT91_UDP_FADDEN;
if (udc->addr)
@@ -1361,9 +1372,10 @@
u32 rescans = 5;
while (rescans--) {
- u32 status = at91_udp_read(AT91_UDP_ISR);
+ u32 status;
- status &= at91_udp_read(AT91_UDP_IMR);
+ status = at91_udp_read(AT91_UDP_ISR)
+ & at91_udp_read(AT91_UDP_IMR);
if (!status)
break;
@@ -1379,18 +1391,17 @@
stop_activity(udc);
/* enable ep0 */
- at91_udp_write(AT91_UDP_CSR(0), AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
+ at91_udp_write(AT91_UDP_CSR(0),
+ AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
udc->gadget.speed = USB_SPEED_FULL;
udc->suspended = 0;
at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0));
/*
* NOTE: this driver keeps clocks off unless the
- * USB host is present. That saves power, and also
- * eliminates IRQs (reset, resume, suspend) that can
- * otherwise flood from the controller. If your
- * board doesn't support VBUS detection, suspend and
- * resume irq logic may need more attention...
+ * USB host is present. That saves power, but for
+ * boards that don't support VBUS detection, both
+ * clocks need to be active most of the time.
*/
/* host initiated suspend (3+ms bus idle) */
@@ -1452,13 +1463,19 @@
/*-------------------------------------------------------------------------*/
+static void nop_release(struct device *dev)
+{
+ /* nothing to free */
+}
+
static struct at91_udc controller = {
.gadget = {
- .ops = &at91_udc_ops,
- .ep0 = &controller.ep[0].ep,
- .name = driver_name,
- .dev = {
- .bus_id = "gadget"
+ .ops = &at91_udc_ops,
+ .ep0 = &controller.ep[0].ep,
+ .name = driver_name,
+ .dev = {
+ .bus_id = "gadget",
+ .release = nop_release,
}
},
.ep[0] = {
@@ -1468,7 +1485,8 @@
},
.udc = &controller,
.maxpacket = 8,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(0)),
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP
+ + AT91_UDP_CSR(0)),
.int_mask = 1 << 0,
},
.ep[1] = {
@@ -1479,7 +1497,8 @@
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 64,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(1)),
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP
+ + AT91_UDP_CSR(1)),
.int_mask = 1 << 1,
},
.ep[2] = {
@@ -1490,7 +1509,8 @@
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 64,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(2)),
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP
+ + AT91_UDP_CSR(2)),
.int_mask = 1 << 2,
},
.ep[3] = {
@@ -1501,7 +1521,8 @@
},
.udc = &controller,
.maxpacket = 8,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(3)),
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP
+ + AT91_UDP_CSR(3)),
.int_mask = 1 << 3,
},
.ep[4] = {
@@ -1512,7 +1533,8 @@
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 256,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(4)),
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP
+ + AT91_UDP_CSR(4)),
.int_mask = 1 << 4,
},
.ep[5] = {
@@ -1523,10 +1545,11 @@
.udc = &controller,
.is_pingpong = 1,
.maxpacket = 256,
- .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(5)),
+ .creg = (void __iomem *)(AT91_VA_BASE_UDP
+ + AT91_UDP_CSR(5)),
.int_mask = 1 << 5,
},
- /* ep6 and ep7 are also reserved */
+ /* ep6 and ep7 are also reserved (custom silicon might use them) */
};
static irqreturn_t at91_vbus_irq(int irq, void *_udc, struct pt_regs *r)
@@ -1593,6 +1616,7 @@
local_irq_disable();
udc->enabled = 0;
+ at91_udp_write(AT91_UDP_IDR, ~0);
pullup(udc, 0);
local_irq_enable();
@@ -1624,6 +1648,16 @@
return -ENODEV;
}
+ if (pdev->num_resources != 2) {
+ DBG("invalid num_resources");
+ return -ENODEV;
+ }
+ if ((pdev->resource[0].flags != IORESOURCE_MEM)
+ || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
+ DBG("invalid resource type");
+ return -ENODEV;
+ }
+
if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) {
DBG("someone's using UDC memory\n");
return -EBUSY;
@@ -1649,19 +1683,26 @@
if (retval < 0)
goto fail0;
- /* disable everything until there's a gadget driver and vbus */
- pullup(udc, 0);
+ /* don't do anything until we have both gadget driver and VBUS */
+ clk_enable(udc->iclk);
+ at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+ at91_udp_write(AT91_UDP_IDR, 0xffffffff);
+ clk_disable(udc->iclk);
/* request UDC and maybe VBUS irqs */
- if (request_irq(AT91_ID_UDP, at91_udc_irq, IRQF_DISABLED, driver_name, udc)) {
- DBG("request irq %d failed\n", AT91_ID_UDP);
+ udc->udp_irq = platform_get_irq(pdev, 0);
+ if (request_irq(udc->udp_irq, at91_udc_irq,
+ IRQF_DISABLED, driver_name, udc)) {
+ DBG("request irq %d failed\n", udc->udp_irq);
retval = -EBUSY;
goto fail1;
}
if (udc->board.vbus_pin > 0) {
- if (request_irq(udc->board.vbus_pin, at91_vbus_irq, IRQF_DISABLED, driver_name, udc)) {
- DBG("request vbus irq %d failed\n", udc->board.vbus_pin);
- free_irq(AT91_ID_UDP, udc);
+ if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
+ IRQF_DISABLED, driver_name, udc)) {
+ DBG("request vbus irq %d failed\n",
+ udc->board.vbus_pin);
+ free_irq(udc->udp_irq, udc);
retval = -EBUSY;
goto fail1;
}
@@ -1670,6 +1711,7 @@
udc->vbus = 1;
}
dev_set_drvdata(dev, udc);
+ device_init_wakeup(dev, 1);
create_debug_file(udc);
INFO("%s version %s\n", driver_name, DRIVER_VERSION);
@@ -1678,14 +1720,14 @@
fail1:
device_unregister(&udc->gadget.dev);
fail0:
- release_mem_region(AT91_VA_BASE_UDP, SZ_16K);
+ release_mem_region(AT91_BASE_UDP, SZ_16K);
DBG("%s probe failed, %d\n", driver_name, retval);
return retval;
}
-static int __devexit at91udc_remove(struct platform_device *dev)
+static int __devexit at91udc_remove(struct platform_device *pdev)
{
- struct at91_udc *udc = platform_get_drvdata(dev);
+ struct at91_udc *udc = platform_get_drvdata(pdev);
DBG("remove\n");
@@ -1694,10 +1736,11 @@
if (udc->driver != 0)
usb_gadget_unregister_driver(udc->driver);
+ device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
if (udc->board.vbus_pin > 0)
free_irq(udc->board.vbus_pin, udc);
- free_irq(AT91_ID_UDP, udc);
+ free_irq(udc->udp_irq, udc);
device_unregister(&udc->gadget.dev);
release_mem_region(AT91_BASE_UDP, SZ_16K);
@@ -1708,31 +1751,36 @@
}
#ifdef CONFIG_PM
-static int at91udc_suspend(struct platform_device *dev, pm_message_t mesg)
+static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
{
- struct at91_udc *udc = platform_get_drvdata(dev);
+ struct at91_udc *udc = platform_get_drvdata(pdev);
+ int wake = udc->driver && device_may_wakeup(&pdev->dev);
- /*
- * The "safe" suspend transitions are opportunistic ... e.g. when
- * the USB link is suspended (48MHz clock autogated off), or when
- * it's disconnected (programmatically gated off, elsewhere).
- * Then we can suspend, and the chip can enter slow clock mode.
- *
- * The problem case is some component (user mode?) suspending this
- * device while it's active, with the 48 MHz clock in use. There
- * are two basic approaches: (a) veto suspend levels involving slow
- * clock mode, (b) disconnect, so 48 MHz will no longer be in use
- * and we can enter slow clock mode. This uses (b) for now, since
- * it's simplest until AT91 PM exists and supports the other option.
+ /* Unless we can act normally to the host (letting it wake us up
+ * whenever it has work for us) force disconnect. Wakeup requires
+ * PLLB for USB events (signaling for reset, wakeup, or incoming
+ * tokens) and VBUS irqs (on systems which support them).
*/
- if (udc->vbus && !udc->suspended)
+ if ((!udc->suspended && udc->addr)
+ || !wake
+ || at91_suspend_entering_slow_clock()) {
pullup(udc, 0);
+ disable_irq_wake(udc->udp_irq);
+ } else
+ enable_irq_wake(udc->udp_irq);
+
+ if (udc->board.vbus_pin > 0) {
+ if (wake)
+ enable_irq_wake(udc->board.vbus_pin);
+ else
+ disable_irq_wake(udc->board.vbus_pin);
+ }
return 0;
}
-static int at91udc_resume(struct platform_device *dev)
+static int at91udc_resume(struct platform_device *pdev)
{
- struct at91_udc *udc = platform_get_drvdata(dev);
+ struct at91_udc *udc = platform_get_drvdata(pdev);
/* maybe reconnect to host; if so, clocks on */
pullup(udc, 1);
@@ -1748,7 +1796,7 @@
.remove = __devexit_p(at91udc_remove),
.shutdown = at91udc_shutdown,
.suspend = at91udc_suspend,
- .resume = at91udc_resume,
+ .resume = at91udc_resume,
.driver = {
.name = (char *) driver_name,
.owner = THIS_MODULE,
@@ -1767,6 +1815,6 @@
}
module_exit(udc_exit_module);
-MODULE_DESCRIPTION("AT91RM9200 udc driver");
+MODULE_DESCRIPTION("AT91 udc driver");
MODULE_AUTHOR("Thomas Rathbone, David Brownell");
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index 5a4799c..882af42 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -141,6 +141,7 @@
struct clk *iclk, *fclk;
struct platform_device *pdev;
struct proc_dir_entry *pde;
+ int udp_irq;
};
static inline struct at91_udc *to_udc(struct usb_gadget *g)
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 4be4719..7d1c22c 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -609,7 +609,8 @@
if (!dum->driver)
return -ESHUTDOWN;
- spin_lock_irqsave (&dum->lock, flags);
+ local_irq_save (flags);
+ spin_lock (&dum->lock);
list_for_each_entry (req, &ep->queue, queue) {
if (&req->req == _req) {
list_del_init (&req->queue);
@@ -618,7 +619,7 @@
break;
}
}
- spin_unlock_irqrestore (&dum->lock, flags);
+ spin_unlock (&dum->lock);
if (retval == 0) {
dev_dbg (udc_dev(dum),
@@ -626,6 +627,7 @@
req, _ep->name, _req->length, _req->buf);
_req->complete (_ep, _req);
}
+ local_irq_restore (flags);
return retval;
}
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 85b0b4a..d63177a 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -892,7 +892,7 @@
#define PCI_DRIVER ehci_pci_driver
#endif
-#ifdef CONFIG_PPC_83xx
+#ifdef CONFIG_MPC834x
#include "ehci-fsl.c"
#define PLATFORM_DRIVER ehci_fsl_driver
#endif
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index cdbafb7..85cc059 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -4,7 +4,7 @@
* Copyright (C) 2004 SAN People (Pty) Ltd.
* Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
*
- * AT91RM9200 Bus Glue
+ * AT91 Bus Glue
*
* Based on fragments of 2.4 driver by Rick Bronson.
* Based on ohci-omap.c
@@ -19,12 +19,13 @@
#include <asm/hardware.h>
#include <asm/arch/board.h>
-#ifndef CONFIG_ARCH_AT91RM9200
-#error "CONFIG_ARCH_AT91RM9200 must be defined."
+#ifndef CONFIG_ARCH_AT91
+#error "CONFIG_ARCH_AT91 must be defined."
#endif
/* interface and function clocks */
static struct clk *iclk, *fclk;
+static int clocked;
extern int usb_disabled(void);
@@ -35,13 +36,14 @@
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_regs __iomem *regs = hcd->regs;
- dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n");
+ dev_dbg(&pdev->dev, "start\n");
/*
* Start the USB clocks.
*/
clk_enable(iclk);
clk_enable(fclk);
+ clocked = 1;
/*
* The USB host controller must remain in reset.
@@ -54,7 +56,7 @@
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_regs __iomem *regs = hcd->regs;
- dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n");
+ dev_dbg(&pdev->dev, "stop\n");
/*
* Put the USB host controller into reset.
@@ -66,6 +68,7 @@
*/
clk_disable(fclk);
clk_disable(iclk);
+ clocked = 0;
}
@@ -78,14 +81,15 @@
/**
- * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs
+ * usb_hcd_at91_probe - initialize AT91-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
-int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev)
+static int usb_hcd_at91_probe(const struct hc_driver *driver,
+ struct platform_device *pdev)
{
int retval;
struct usb_hcd *hcd = NULL;
@@ -95,12 +99,13 @@
return -ENODEV;
}
- if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
+ if ((pdev->resource[0].flags != IORESOURCE_MEM)
+ || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
pr_debug("hcd probe: invalid resource type\n");
return -ENODEV;
}
- hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200");
+ hcd = usb_create_hcd(driver, &pdev->dev, "at91");
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = pdev->resource[0].start;
@@ -149,21 +154,23 @@
/* may be called with controller, bus, and devices active */
/**
- * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs
+ * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_at91_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
+ * context, "rmmod" or something similar.
*
*/
-static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev)
+static int usb_hcd_at91_remove(struct usb_hcd *hcd,
+ struct platform_device *pdev)
{
usb_remove_hcd(hcd);
at91_stop_hc(pdev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ disable_irq_wake(hcd->irq);
clk_put(fclk);
clk_put(iclk);
@@ -178,19 +185,21 @@
static int __devinit
ohci_at91_start (struct usb_hcd *hcd)
{
-// struct at91_ohci_data *board = hcd->self.controller->platform_data;
+ struct at91_usbh_data *board = hcd->self.controller->platform_data;
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ struct usb_device *root = hcd->self.root_hub;
int ret;
if ((ret = ohci_init(ohci)) < 0)
return ret;
+ root->maxchild = board->ports;
+
if ((ret = ohci_run(ohci)) < 0) {
err("can't start %s", hcd->self.bus_name);
ohci_stop(hcd);
return ret;
}
-// hcd->self.root_hub->maxchild = board->ports;
return 0;
}
@@ -198,7 +207,7 @@
static const struct hc_driver ohci_at91_hc_driver = {
.description = hcd_name,
- .product_desc = "AT91RM9200 OHCI",
+ .product_desc = "AT91 OHCI",
.hcd_priv_size = sizeof(struct ohci_hcd),
/*
@@ -240,33 +249,54 @@
/*-------------------------------------------------------------------------*/
-static int ohci_hcd_at91_drv_probe(struct platform_device *dev)
+static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
- return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev);
+ device_init_wakeup(&pdev->dev, 1);
+ return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
}
-static int ohci_hcd_at91_drv_remove(struct platform_device *dev)
+static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
{
- return usb_hcd_at91_remove(platform_get_drvdata(dev), dev);
+ device_init_wakeup(&pdev->dev, 0);
+ return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
}
#ifdef CONFIG_PM
-/* REVISIT suspend/resume look "too" simple here */
-
static int
-ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg)
+ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
{
- clk_disable(fclk);
- clk_disable(iclk);
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+ if (device_may_wakeup(&pdev->dev))
+ enable_irq_wake(hcd->irq);
+ else
+ disable_irq_wake(hcd->irq);
+
+ /*
+ * The integrated transceivers seem unable to notice disconnect,
+ * reconnect, or wakeup without the 48 MHz clock active. so for
+ * correctness, always discard connection state (using reset).
+ *
+ * REVISIT: some boards will be able to turn VBUS off...
+ */
+ if (at91_suspend_entering_slow_clock()) {
+ ohci_usb_reset (ohci);
+ clk_disable(fclk);
+ clk_disable(iclk);
+ clocked = 0;
+ }
return 0;
}
-static int ohci_hcd_at91_drv_resume(struct platform_device *dev)
+static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
{
- clk_enable(iclk);
- clk_enable(fclk);
+ if (!clocked) {
+ clk_enable(iclk);
+ clk_enable(fclk);
+ }
return 0;
}
@@ -275,7 +305,7 @@
#define ohci_hcd_at91_drv_resume NULL
#endif
-MODULE_ALIAS("at91rm9200-ohci");
+MODULE_ALIAS("at91_ohci");
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
@@ -283,7 +313,7 @@
.suspend = ohci_hcd_at91_drv_suspend,
.resume = ohci_hcd_at91_drv_resume,
.driver = {
- .name = "at91rm9200-ohci",
+ .name = "at91_ohci",
.owner = THIS_MODULE,
},
};
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index afef5ac..94d8cf4 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -913,7 +913,7 @@
#include "ohci-ppc-soc.c"
#endif
-#ifdef CONFIG_ARCH_AT91RM9200
+#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
#include "ohci-at91.c"
#endif
@@ -927,6 +927,7 @@
|| defined (CONFIG_SOC_AU1X00) \
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
|| defined (CONFIG_ARCH_AT91RM9200) \
+ || defined (CONFIG_ARCH_AT91SAM9261) \
)
#error "missing bus glue for ohci-hcd"
#endif
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index c9d72ac..66c3f61 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -943,7 +943,9 @@
/* We received a short packet */
if (urb->transfer_flags & URB_SHORT_NOT_OK)
ret = -EREMOTEIO;
- else if (ctrlstat & TD_CTRL_SPD)
+
+ /* Fixup needed only if this isn't the URB's last TD */
+ else if (&td->list != urbp->td_list.prev)
ret = 1;
}
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index 05d2d60..df198cf 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -152,9 +152,8 @@
* events. The hardware generates 5 events for the first keypress
* and we have to take this into account for an accurate repeat
* behaviour.
- * (HZ / 20) == 50 ms and works well for me.
*/
-#define FILTER_TIME (HZ / 20)
+#define FILTER_TIME 60 /* msec */
struct ati_remote {
struct input_dev *idev;
@@ -467,7 +466,7 @@
/* Filter duplicate events which happen "too close" together. */
if ((ati_remote->old_data[0] == data[1]) &&
(ati_remote->old_data[1] == data[2]) &&
- time_before(jiffies, ati_remote->old_jiffies + FILTER_TIME)) {
+ time_before(jiffies, ati_remote->old_jiffies + msecs_to_jiffies(FILTER_TIME))) {
ati_remote->repeat_count++;
} else {
ati_remote->repeat_count = 0;
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index e091d32..a4062a6 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -12,8 +12,13 @@
* the single I/O ports of the device.
*
* Supported vendors: AK Modul-Bus Computer GmbH
-* Supported devices: CY7C63001A-PC (to be continued...)
-* Supported functions: Read/Write Ports (to be continued...)
+* (Firmware "Port-Chip")
+*
+* Supported devices: CY7C63001A-PC
+* CY7C63001C-PXC
+* CY7C63001C-SXC
+*
+* Supported functions: Read/Write Ports
*
*
* This program is free software; you can redistribute it and/or
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index e5e6e4f..bd09232 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -175,6 +175,8 @@
static void rtl8150_disconnect(struct usb_interface *intf);
static int rtl8150_probe(struct usb_interface *intf,
const struct usb_device_id *id);
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message);
+static int rtl8150_resume(struct usb_interface *intf);
static const char driver_name [] = "rtl8150";
@@ -183,6 +185,8 @@
.probe = rtl8150_probe,
.disconnect = rtl8150_disconnect,
.id_table = rtl8150_table,
+ .suspend = rtl8150_suspend,
+ .resume = rtl8150_resume
};
/*
@@ -238,9 +242,11 @@
usb_fill_control_urb(dev->ctrl_urb, dev->udev,
usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr,
&dev->rx_creg, size, ctrl_callback, dev);
- if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC)))
+ if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) {
+ if (ret == -ENODEV)
+ netif_device_detach(dev->netdev);
err("control request submission failed: %d", ret);
- else
+ } else
set_bit(RX_REG_SET, &dev->flags);
return ret;
@@ -416,6 +422,7 @@
struct sk_buff *skb;
struct net_device *netdev;
u16 rx_stat;
+ int status;
dev = urb->context;
if (!dev)
@@ -465,7 +472,10 @@
goon:
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
- if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) {
+ status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+ if (status == -ENODEV)
+ netif_device_detach(dev->netdev);
+ else if (status) {
set_bit(RX_URB_FAIL, &dev->flags);
goto resched;
} else {
@@ -481,6 +491,7 @@
{
rtl8150_t *dev;
struct sk_buff *skb;
+ int status;
dev = (rtl8150_t *)data;
@@ -499,10 +510,13 @@
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
try_again:
- if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) {
+ status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+ if (status == -ENODEV) {
+ netif_device_detach(dev->netdev);
+ } else if (status) {
set_bit(RX_URB_FAIL, &dev->flags);
goto tlsched;
- } else {
+ } else {
clear_bit(RX_URB_FAIL, &dev->flags);
}
@@ -574,12 +588,43 @@
resubmit:
status = usb_submit_urb (urb, SLAB_ATOMIC);
- if (status)
+ if (status == -ENODEV)
+ netif_device_detach(dev->netdev);
+ else if (status)
err ("can't resubmit intr, %s-%s/input0, status %d",
dev->udev->bus->bus_name,
dev->udev->devpath, status);
}
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ rtl8150_t *dev = usb_get_intfdata(intf);
+
+ netif_device_detach(dev->netdev);
+
+ if (netif_running(dev->netdev)) {
+ usb_kill_urb(dev->rx_urb);
+ usb_kill_urb(dev->intr_urb);
+ }
+ return 0;
+}
+
+static int rtl8150_resume(struct usb_interface *intf)
+{
+ rtl8150_t *dev = usb_get_intfdata(intf);
+
+ netif_device_attach(dev->netdev);
+ if (netif_running(dev->netdev)) {
+ dev->rx_urb->status = 0;
+ dev->rx_urb->actual_length = 0;
+ read_bulk_callback(dev->rx_urb, NULL);
+
+ dev->intr_urb->status = 0;
+ dev->intr_urb->actual_length = 0;
+ intr_callback(dev->intr_urb, NULL);
+ }
+ return 0;
+}
/*
**
@@ -690,9 +735,14 @@
usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2),
skb->data, count, write_bulk_callback, dev);
if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
- warn("failed tx_urb %d\n", res);
- dev->stats.tx_errors++;
- netif_start_queue(netdev);
+ /* Can we get/handle EPIPE here? */
+ if (res == -ENODEV)
+ netif_device_detach(dev->netdev);
+ else {
+ warn("failed tx_urb %d\n", res);
+ dev->stats.tx_errors++;
+ netif_start_queue(netdev);
+ }
} else {
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
@@ -729,16 +779,25 @@
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
- if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL)))
+ if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) {
+ if (res == -ENODEV)
+ netif_device_detach(dev->netdev);
warn("%s: rx_urb submit failed: %d", __FUNCTION__, res);
+ return res;
+ }
usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3),
dev->intr_buff, INTBUFSIZE, intr_callback,
dev, dev->intr_interval);
- if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL)))
+ if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) {
+ if (res == -ENODEV)
+ netif_device_detach(dev->netdev);
warn("%s: intr_urb submit failed: %d", __FUNCTION__, res);
- netif_start_queue(netdev);
+ usb_kill_urb(dev->rx_urb);
+ return res;
+ }
enable_net_traffic(dev);
set_carrier(netdev);
+ netif_start_queue(netdev);
return res;
}
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index ac33bd4..f5b9438 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -62,15 +62,6 @@
To compile this driver as a module, choose M here: the
module will be called airprime.
-config USB_SERIAL_ANYDATA
- tristate "USB AnyData CDMA Wireless Driver"
- depends on USB_SERIAL
- help
- Say Y here if you want to use a AnyData CDMA device.
-
- To compile this driver as a module, choose M here: the
- module will be called anydata.
-
config USB_SERIAL_ARK3116
tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
@@ -502,15 +493,18 @@
module will be called keyspan_pda.
config USB_SERIAL_OPTION
- tristate "USB driver for GSM modems"
+ tristate "USB driver for GSM and CDMA modems"
depends on USB_SERIAL
help
- Say Y here if you have an "Option" GSM PCMCIA card
- (or an OEM version: branded Huawei, Audiovox, or Novatel).
+ Say Y here if you have a GSM or CDMA modem that's connected to USB.
- These cards feature a built-in OHCI-USB adapter and an
- internally-connected GSM modem. The USB bus is not
- accessible externally.
+ This driver also supports several PCMCIA cards which have a
+ built-in OHCI-USB adapter and an internally-connected GSM modem.
+ The USB bus on these cards is not accessible externally.
+
+ Supported devices include (some of?) those made by:
+ Option, Huawei, Audiovox, Sierra Wireless, Novatel Wireless, or
+ Anydata.
To compile this driver as a module, choose M here: the
module will be called option.
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 35d4acc..8efed2c 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -12,7 +12,6 @@
usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y)
obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o
-obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o
obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o
obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o
obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o
diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c
deleted file mode 100644
index 01843ef..0000000
--- a/drivers/usb/serial/anydata.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * AnyData CDMA Serial USB driver
- *
- * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-static struct usb_device_id id_table [] = {
- { USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */
- { },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-/* if overridden by the user, then use their value for the size of the
- * read and write urbs */
-static int buffer_size;
-static int debug;
-
-static struct usb_driver anydata_driver = {
- .name = "anydata",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table,
- .no_dynamic_id = 1,
-};
-
-static int anydata_open(struct usb_serial_port *port, struct file *filp)
-{
- char *buffer;
- int result = 0;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if (buffer_size) {
- /* override the default buffer sizes */
- buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!buffer) {
- dev_err(&port->dev, "%s - out of memory.\n",
- __FUNCTION__);
- return -ENOMEM;
- }
- kfree (port->read_urb->transfer_buffer);
- port->read_urb->transfer_buffer = buffer;
- port->read_urb->transfer_buffer_length = buffer_size;
-
- buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!buffer) {
- dev_err(&port->dev, "%s - out of memory.\n",
- __FUNCTION__);
- return -ENOMEM;
- }
- kfree (port->write_urb->transfer_buffer);
- port->write_urb->transfer_buffer = buffer;
- port->write_urb->transfer_buffer_length = buffer_size;
- port->bulk_out_size = buffer_size;
- }
-
- /* Start reading from the device */
- usb_fill_bulk_urb(port->read_urb, port->serial->dev,
- usb_rcvbulkpipe(port->serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- usb_serial_generic_read_bulk_callback, port);
- result = usb_submit_urb(port->read_urb, GFP_KERNEL);
- if (result)
- dev_err(&port->dev,
- "%s - failed submitting read urb, error %d\n",
- __FUNCTION__, result);
-
- return result;
-}
-
-static struct usb_serial_driver anydata_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "anydata",
- },
- .id_table = id_table,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = NUM_DONT_CARE,
- .num_bulk_out = NUM_DONT_CARE,
- .num_ports = 1,
- .open = anydata_open,
-};
-
-static int __init anydata_init(void)
-{
- int retval;
-
- retval = usb_serial_register(&anydata_device);
- if (retval)
- return retval;
- retval = usb_register(&anydata_driver);
- if (retval)
- usb_serial_deregister(&anydata_device);
- return retval;
-}
-
-static void __exit anydata_exit(void)
-{
- usb_deregister(&anydata_driver);
- usb_serial_deregister(&anydata_device);
-}
-
-module_init(anydata_init);
-module_exit(anydata_exit);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
-module_param(buffer_size, int, 0);
-MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers");
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b458aed..a20da85 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -337,6 +337,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 04ef90f..9f7343a 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -182,6 +182,10 @@
/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
+/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
+
+#define FTDI_TNC_X_PID 0xEBE0
+
/*
* ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
* All of these devices use FTDI's vendor ID (0x0403).
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 59c5d99..7e1bd5d 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -250,6 +250,7 @@
{ USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */
{ USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
{ USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
+ { USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */
{ USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
{ USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
{ USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f0530c1..c856e6f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -9,40 +9,14 @@
Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
- History:
-
- 2005-05-19 v0.1 Initial version, based on incomplete docs
- and analysis of misbehavior with the standard driver
- 2005-05-20 v0.2 Extended the input buffer to avoid losing
- random 64-byte chunks of data
- 2005-05-21 v0.3 implemented chars_in_buffer()
- turned on low_latency
- simplified the code somewhat
- 2005-05-24 v0.4 option_write() sometimes deadlocked under heavy load
- removed some dead code
- added sponsor notice
- coding style clean-up
- 2005-06-20 v0.4.1 add missing braces :-/
- killed end-of-line whitespace
- 2005-07-15 v0.4.2 rename WLAN product to FUSION, add FUSION2
- 2005-09-10 v0.4.3 added HUAWEI E600 card and Audiovox AirCard
- 2005-09-20 v0.4.4 increased recv buffer size: the card sometimes
- wants to send >2000 bytes.
- 2006-04-10 v0.5 fixed two array overrun errors :-/
- 2006-04-21 v0.5.1 added support for Sierra Wireless MC8755
- 2006-05-15 v0.6 re-enable multi-port support
- 2006-06-01 v0.6.1 add COBRA
- 2006-06-01 v0.6.2 add backwards-compatibility stuff
- 2006-06-01 v0.6.3 add Novatel Wireless
- 2006-06-01 v0.7 Option => GSM
- 2006-06-01 v0.7.1 add COBRA2
+ History: see the git log.
Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
This driver exists because the "normal" serial driver doesn't work too well
with GSM modems. Issues:
- data loss -- one single Receive URB is not nearly enough
- - nonstandard flow (Option devices) and multiplex (Sierra) control
+ - nonstandard flow (Option devices) control
- controlling the baud rate doesn't make sense
This driver is named "option" because the most common device it's
@@ -96,8 +70,8 @@
#define OPTION_VENDOR_ID 0x0AF0
#define HUAWEI_VENDOR_ID 0x12D1
#define AUDIOVOX_VENDOR_ID 0x0F3D
-#define SIERRAWIRELESS_VENDOR_ID 0x1199
#define NOVATELWIRELESS_VENDOR_ID 0x1410
+#define ANYDATA_VENDOR_ID 0x16d5
#define OPTION_PRODUCT_OLD 0x5000
#define OPTION_PRODUCT_FUSION 0x6000
@@ -106,8 +80,8 @@
#define OPTION_PRODUCT_COBRA2 0x6600
#define HUAWEI_PRODUCT_E600 0x1001
#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
-#define SIERRAWIRELESS_PRODUCT_MC8755 0x6802
#define NOVATELWIRELESS_PRODUCT_U740 0x1400
+#define ANYDATA_PRODUCT_ID 0x6501
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
@@ -117,8 +91,8 @@
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
- { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
+ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
};
@@ -131,10 +105,7 @@
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
- { } /* Terminating entry */
-};
-static struct usb_device_id option_ids3[] = {
- { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
+ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
};
@@ -151,37 +122,11 @@
/* The card has three separate interfaces, which the serial driver
* recognizes separately, thus num_port=1.
*/
-static struct usb_serial_driver option_3port_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "option",
- },
- .description = "GSM modem (3-port)",
- .id_table = option_ids3,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = NUM_DONT_CARE,
- .num_bulk_out = NUM_DONT_CARE,
- .num_ports = 3,
- .open = option_open,
- .close = option_close,
- .write = option_write,
- .write_room = option_write_room,
- .chars_in_buffer = option_chars_in_buffer,
- .throttle = option_rx_throttle,
- .unthrottle = option_rx_unthrottle,
- .set_termios = option_set_termios,
- .break_ctl = option_break_ctl,
- .tiocmget = option_tiocmget,
- .tiocmset = option_tiocmset,
- .attach = option_startup,
- .shutdown = option_shutdown,
- .read_int_callback = option_instat_callback,
-};
static struct usb_serial_driver option_1port_device = {
.driver = {
.owner = THIS_MODULE,
- .name = "option",
+ .name = "option1",
},
.description = "GSM modem (1-port)",
.id_table = option_ids1,
@@ -245,9 +190,6 @@
retval = usb_serial_register(&option_1port_device);
if (retval)
goto failed_1port_device_register;
- retval = usb_serial_register(&option_3port_device);
- if (retval)
- goto failed_3port_device_register;
retval = usb_register(&option_driver);
if (retval)
goto failed_driver_register;
@@ -257,8 +199,6 @@
return 0;
failed_driver_register:
- usb_serial_deregister (&option_3port_device);
-failed_3port_device_register:
usb_serial_deregister (&option_1port_device);
failed_1port_device_register:
return retval;
@@ -267,7 +207,6 @@
static void __exit option_exit(void)
{
usb_deregister (&option_driver);
- usb_serial_deregister (&option_3port_device);
usb_serial_deregister (&option_1port_device);
}
@@ -656,7 +595,6 @@
dbg("%s", __FUNCTION__);
-
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 259db31..efbbc0a 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -81,6 +81,7 @@
{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
{ USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) },
{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
+ { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index d9c1e6e..a692ac6 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -89,3 +89,7 @@
/* DATAPILOT Universal-2 Phone Cable */
#define DATAPILOT_U2_VENDOR_ID 0x0731
#define DATAPILOT_U2_PRODUCT_ID 0x2003
+
+/* Belkin "F5U257" Serial Adapter */
+#define BELKIN_VENDOR_ID 0x050d
+#define BELKIN_PRODUCT_ID 0x0257
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index a5ca449..2793f9a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -145,6 +145,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Mario Rettig <mariorettig@web.de> */
+UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
+ "Nokia",
+ "Nokia 3250",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
* Einar Th. Einarsson <einarthered@gmail.com> */
UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100,
@@ -627,18 +634,6 @@
"Digital Camera EX-20 DSC",
US_SC_8070, US_PR_DEVICE, NULL, 0 ),
-/* The entry was here before I took over, and had US_SC_RBC. It turns
- * out that isn't needed. Additionally, Torsten Eriksson
- * <Torsten.Eriksson@bergianska.se> is able to use his device fine
- * without this entry at all - but I don't suspect that will be true
- * for all users (the protocol is likely needed), so is staying at
- * this time. - Phil Dibowitz <phil@ipom.com>
- */
-UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200,
- "LaCie",
- "USB Hard Disk",
- US_SC_DEVICE, US_PR_CB, NULL, 0 ),
-
/* Submitted by Joel Bourquard <numlock@freesurf.ch>
* Some versions of this device need the SubClass and Protocol overrides
* while others don't.
@@ -1106,7 +1101,15 @@
"Optio S/S4",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-
+
+/* This is a virtual windows driver CD, which the zd1211rw driver automatically
+ * converts into a WLAN device. */
+UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
+ "ZyXEL",
+ "G-220F USB-WLAN Install",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE ),
+
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 5ee19be..8d7bdcb 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -483,7 +483,7 @@
}
/* Get the unusual_devs entries and the string descriptors */
-static void get_device_info(struct us_data *us, const struct usb_device_id *id)
+static int get_device_info(struct us_data *us, const struct usb_device_id *id)
{
struct usb_device *dev = us->pusb_dev;
struct usb_interface_descriptor *idesc =
@@ -500,6 +500,11 @@
unusual_dev->useTransport;
us->flags = USB_US_ORIG_FLAGS(id->driver_info);
+ if (us->flags & US_FL_IGNORE_DEVICE) {
+ printk(KERN_INFO USB_STORAGE "device ignored\n");
+ return -ENODEV;
+ }
+
/*
* This flag is only needed when we're in high-speed, so let's
* disable it if we're in full-speed
@@ -541,6 +546,8 @@
msgs[msg],
UTS_RELEASE);
}
+
+ return 0;
}
/* Get the transport settings */
@@ -969,7 +976,9 @@
* of the match from the usb_device_id table, so we can find the
* corresponding entry in the private table.
*/
- get_device_info(us, id);
+ result = get_device_info(us, id);
+ if (result)
+ goto BadDevice;
/* Get the transport, protocol, and pipe settings */
result = get_transport(us);
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index 3c4eb9f..f83003f 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -48,8 +48,6 @@
};
extern unsigned int mpurate;
-extern struct list_head clocks;
-extern spinlock_t clockfw_lock;
extern int clk_init(struct clk_functions * custom_clocks);
extern int clk_register(struct clk *clk);
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c944e8f..d2bd0c8 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -103,8 +103,7 @@
* @condition: binding state of the interface: not bound, binding
* (in probe()), bound to a driver, or unbinding (in disconnect())
* @dev: driver model's view of this device
- * @usb_dev: if an interface is bound to the USB major, this will point
- * to the sysfs representation for that device.
+ * @class_dev: driver model's class view of this device.
*
* USB device drivers attach to interfaces on a physical device. Each
* interface encapsulates a single high level function, such as feeding
@@ -144,7 +143,7 @@
* bound to */
enum usb_interface_condition condition; /* state of binding */
struct device dev; /* interface specific device info */
- struct device *usb_dev; /* pointer to the usb class's device, if any */
+ struct class_device *class_dev;
};
#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
#define interface_to_usbdev(intf) \
@@ -361,7 +360,7 @@
char *serial; /* iSerialNumber string, if present */
struct list_head filelist;
- struct device *usbfs_dev;
+ struct class_device *class_dev;
struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */
/*
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index f38f43f..e7fc5fe 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -44,7 +44,9 @@
US_FLAG(NO_WP_DETECT, 0x00000200) \
/* Don't check for write-protect */ \
US_FLAG(MAX_SECTORS_64, 0x00000400) \
- /* Sets max_sectors to 64 */
+ /* Sets max_sectors to 64 */ \
+ US_FLAG(IGNORE_DEVICE, 0x00000800) \
+ /* Don't claim device */
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
diff --git a/kernel/signal.c b/kernel/signal.c
index 7fe874d..bfdb568 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -791,22 +791,31 @@
/*
* Force a signal that the process can't ignore: if necessary
* we unblock the signal and change any SIG_IGN to SIG_DFL.
+ *
+ * Note: If we unblock the signal, we always reset it to SIG_DFL,
+ * since we do not want to have a signal handler that was blocked
+ * be invoked when user space had explicitly blocked it.
+ *
+ * We don't want to have recursive SIGSEGV's etc, for example.
*/
-
int
force_sig_info(int sig, struct siginfo *info, struct task_struct *t)
{
unsigned long int flags;
- int ret;
+ int ret, blocked, ignored;
+ struct k_sigaction *action;
spin_lock_irqsave(&t->sighand->siglock, flags);
- if (t->sighand->action[sig-1].sa.sa_handler == SIG_IGN) {
- t->sighand->action[sig-1].sa.sa_handler = SIG_DFL;
+ action = &t->sighand->action[sig-1];
+ ignored = action->sa.sa_handler == SIG_IGN;
+ blocked = sigismember(&t->blocked, sig);
+ if (blocked || ignored) {
+ action->sa.sa_handler = SIG_DFL;
+ if (blocked) {
+ sigdelset(&t->blocked, sig);
+ recalc_sigpending_tsk(t);
+ }
}
- if (sigismember(&t->blocked, sig)) {
- sigdelset(&t->blocked, sig);
- }
- recalc_sigpending_tsk(t);
ret = specific_send_sig_info(sig, info, t);
spin_unlock_irqrestore(&t->sighand->siglock, flags);
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index f011322..bb19c15 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -77,8 +77,7 @@
# cc-version
# Usage gcc-ver := $(call cc-version, $(CC))
-cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \
- $(if $(1), $(1), $(CC)))
+cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC))
# cc-ifversion
# Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index a495502..0a64688 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -40,7 +40,7 @@
include scripts/Makefile.lib
kernelsymfile := $(objtree)/Module.symvers
-modulesymfile := $(KBUILD_EXTMOD)/Modules.symvers
+modulesymfile := $(KBUILD_EXTMOD)/Module.symvers
# Step 1), find all modules listed in $(MODVERDIR)/
__modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod)))
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index 2ee48c3..a69d8ac 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -357,7 +357,7 @@
for (e = prop->expr; e; e = e->left.expr)
if (e->right.sym->visible != no)
flags &= e->right.sym->flags;
- sym->flags |= flags & SYMBOL_DEF_USER;
+ sym->flags &= flags | ~SYMBOL_DEF_USER;
}
sym_change_count += conf_warnings || conf_unsaved;
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 37f67c2..4431292 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -52,6 +52,23 @@
sprintf(str + strlen(str), "*"); \
} while(0)
+/**
+ * Check that sizeof(device_id type) are consistent with size of section
+ * in .o file. If in-consistent then userspace and kernel does not agree
+ * on actual size which is a bug.
+ **/
+static void device_id_size_check(const char *modname, const char *device_id,
+ unsigned long size, unsigned long id_size)
+{
+ if (size % id_size || size < id_size) {
+ fatal("%s: sizeof(struct %s_device_id)=%lu is not a modulo "
+ "of the size of section __mod_%s_device_table=%lu.\n"
+ "Fix definition of struct %s_device_id "
+ "in mod_devicetable.h\n",
+ modname, device_id, id_size, device_id, size, device_id);
+ }
+}
+
/* USB is special because the bcdDevice can be matched against a numeric range */
/* Looks like "usb:vNpNdNdcNdscNdpNicNiscNipN" */
static void do_usb_entry(struct usb_device_id *id,
@@ -152,10 +169,8 @@
unsigned int i;
const unsigned long id_size = sizeof(struct usb_device_id);
- if (size % id_size || size < id_size) {
- warn("%s ids %lu bad size "
- "(each on %lu)\n", mod->name, size, id_size);
- }
+ device_id_size_check(mod->name, "usb", size, id_size);
+
/* Leave last one: it's the terminator. */
size -= id_size;
@@ -434,6 +449,7 @@
static void do_table(void *symval, unsigned long size,
unsigned long id_size,
+ const char *device_id,
void *function,
struct module *mod)
{
@@ -441,10 +457,7 @@
char alias[500];
int (*do_entry)(const char *, void *entry, char *alias) = function;
- if (size % id_size || size < id_size) {
- warn("%s ids %lu bad size "
- "(each on %lu)\n", mod->name, size, id_size);
- }
+ device_id_size_check(mod->name, device_id, size, id_size);
/* Leave last one: it's the terminator. */
size -= id_size;
@@ -476,40 +489,51 @@
+ sym->st_value;
if (sym_is(symname, "__mod_pci_device_table"))
- do_table(symval, sym->st_size, sizeof(struct pci_device_id),
+ do_table(symval, sym->st_size,
+ sizeof(struct pci_device_id), "pci",
do_pci_entry, mod);
else if (sym_is(symname, "__mod_usb_device_table"))
/* special case to handle bcdDevice ranges */
do_usb_table(symval, sym->st_size, mod);
else if (sym_is(symname, "__mod_ieee1394_device_table"))
- do_table(symval, sym->st_size, sizeof(struct ieee1394_device_id),
+ do_table(symval, sym->st_size,
+ sizeof(struct ieee1394_device_id), "ieee1394",
do_ieee1394_entry, mod);
else if (sym_is(symname, "__mod_ccw_device_table"))
- do_table(symval, sym->st_size, sizeof(struct ccw_device_id),
+ do_table(symval, sym->st_size,
+ sizeof(struct ccw_device_id), "ccw",
do_ccw_entry, mod);
else if (sym_is(symname, "__mod_serio_device_table"))
- do_table(symval, sym->st_size, sizeof(struct serio_device_id),
+ do_table(symval, sym->st_size,
+ sizeof(struct serio_device_id), "serio",
do_serio_entry, mod);
else if (sym_is(symname, "__mod_pnp_device_table"))
- do_table(symval, sym->st_size, sizeof(struct pnp_device_id),
+ do_table(symval, sym->st_size,
+ sizeof(struct pnp_device_id), "pnp",
do_pnp_entry, mod);
else if (sym_is(symname, "__mod_pnp_card_device_table"))
- do_table(symval, sym->st_size, sizeof(struct pnp_card_device_id),
+ do_table(symval, sym->st_size,
+ sizeof(struct pnp_card_device_id), "pnp_card",
do_pnp_card_entry, mod);
else if (sym_is(symname, "__mod_pcmcia_device_table"))
- do_table(symval, sym->st_size, sizeof(struct pcmcia_device_id),
+ do_table(symval, sym->st_size,
+ sizeof(struct pcmcia_device_id), "pcmcia",
do_pcmcia_entry, mod);
else if (sym_is(symname, "__mod_of_device_table"))
- do_table(symval, sym->st_size, sizeof(struct of_device_id),
+ do_table(symval, sym->st_size,
+ sizeof(struct of_device_id), "of",
do_of_entry, mod);
else if (sym_is(symname, "__mod_vio_device_table"))
- do_table(symval, sym->st_size, sizeof(struct vio_device_id),
+ do_table(symval, sym->st_size,
+ sizeof(struct vio_device_id), "vio",
do_vio_entry, mod);
else if (sym_is(symname, "__mod_i2c_device_table"))
- do_table(symval, sym->st_size, sizeof(struct i2c_device_id),
+ do_table(symval, sym->st_size,
+ sizeof(struct i2c_device_id), "i2c",
do_i2c_entry, mod);
else if (sym_is(symname, "__mod_input_device_table"))
- do_table(symval, sym->st_size, sizeof(struct input_device_id),
+ do_table(symval, sym->st_size,
+ sizeof(struct input_device_id), "input",
do_input_entry, mod);
}
