diff --git a/.gitignore b/.gitignore
index 27fd376..b1f5b9d 100644
--- a/.gitignore
+++ b/.gitignore
@@ -30,6 +30,11 @@
 include/linux/autoconf.h
 include/linux/compile.h
 include/linux/version.h
+include/linux/utsrelease.h
 
 # stgit generated dirs
 patches-*
+
+# quilt's files
+patches
+series
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index f86550f..22c5331 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -59,7 +59,7 @@
 would issue more ioctls to the device to communicate to it using
 control, bulk, or other kinds of USB transfers.  The IOCTLs are
 listed in the <linux/usbdevice_fs.h> file, and at this writing the
-source code (linux/drivers/usb/devio.c) is the primary reference
+source code (linux/drivers/usb/core/devio.c) is the primary reference
 for how to access devices through those files.
 
 Note that since by default these BBB/DDD files are writable only by
diff --git a/Documentation/usb/usb-help.txt b/Documentation/usb/usb-help.txt
index b7c3249..a740859 100644
--- a/Documentation/usb/usb-help.txt
+++ b/Documentation/usb/usb-help.txt
@@ -5,8 +5,7 @@
 Documentation/usb/*, see the following:
 
 Linux-USB project:  http://www.linux-usb.org
-  mirrors at        http://www.suse.cz/development/linux-usb/
-         and        http://usb.in.tum.de/linux-usb/
+  mirrors at        http://usb.in.tum.de/linux-usb/
          and        http://it.linux-usb.org
 Linux USB Guide:    http://linux-usb.sourceforge.net
 Linux-USB device overview (working devices and drivers):
diff --git a/Makefile b/Makefile
index c9b7dbb..110db85 100644
--- a/Makefile
+++ b/Makefile
@@ -310,8 +310,8 @@
 CFLAGS          := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
                    -fno-strict-aliasing -fno-common
 # Force gcc to behave correct even for buggy distributions
-CFLAGS          += $(call cc-option, -fno-stack-protector-all \
-                                     -fno-stack-protector)
+CFLAGS          += $(call cc-option, -fno-stack-protector)
+
 AFLAGS          := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -368,6 +368,7 @@
 
 no-dot-config-targets := clean mrproper distclean \
 			 cscope TAGS tags help %docs check% \
+			 include/linux/version.h headers_% \
 			 kernelrelease kernelversion
 
 config-targets := 0
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index f3c1ebf..f3e020f 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -95,7 +95,8 @@
 }
 #endif
 
-static struct irqchip gic_chip = {
+static struct irq_chip gic_chip = {
+	.name		= "GIC",
 	.ack		= gic_ack_irq,
 	.mask		= gic_mask_irq,
 	.unmask		= gic_unmask_irq,
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 04de83f..4e0dcae 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -204,7 +204,8 @@
 	locomo_writel(r, mapbase + LOCOMO_ICR);
 }
 
-static struct irqchip locomo_chip = {
+static struct irq_chip locomo_chip = {
+	.name	= "LOCOMO",
 	.ack	= locomo_ack_irq,
 	.mask	= locomo_mask_irq,
 	.unmask	= locomo_unmask_irq,
@@ -249,7 +250,8 @@
 	locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
 }
 
-static struct irqchip locomo_key_chip = {
+static struct irq_chip locomo_key_chip = {
+	.name	= "LOCOMO-key",
 	.ack	= locomo_key_ack_irq,
 	.mask	= locomo_key_mask_irq,
 	.unmask	= locomo_key_unmask_irq,
@@ -312,7 +314,8 @@
 	locomo_writel(r, mapbase + LOCOMO_GIE);
 }
 
-static struct irqchip locomo_gpio_chip = {
+static struct irq_chip locomo_gpio_chip = {
+	.name	= "LOCOMO-gpio",
 	.ack	= locomo_gpio_ack_irq,
 	.mask	= locomo_gpio_mask_irq,
 	.unmask	= locomo_gpio_unmask_irq,
@@ -357,7 +360,8 @@
 	locomo_writel(r, mapbase + LOCOMO_LTINT);
 }
 
-static struct irqchip locomo_lt_chip = {
+static struct irq_chip locomo_lt_chip = {
+	.name	= "LOCOMO-lt",
 	.ack	= locomo_lt_ack_irq,
 	.mask	= locomo_lt_mask_irq,
 	.unmask	= locomo_lt_unmask_irq,
@@ -418,7 +422,8 @@
 	locomo_writel(r, mapbase + LOCOMO_SPIIE);
 }
 
-static struct irqchip locomo_spi_chip = {
+static struct irq_chip locomo_spi_chip = {
+	.name	= "LOCOMO-spi",
 	.ack	= locomo_spi_ack_irq,
 	.mask	= locomo_spi_mask_irq,
 	.unmask	= locomo_spi_unmask_irq,
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 1cdb26a..a331c12 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -272,7 +272,8 @@
 	return 0;
 }
 
-static struct irqchip sa1111_low_chip = {
+static struct irq_chip sa1111_low_chip = {
+	.name		= "SA1111-l",
 	.ack		= sa1111_ack_irq,
 	.mask		= sa1111_mask_lowirq,
 	.unmask		= sa1111_unmask_lowirq,
@@ -368,7 +369,8 @@
 	return 0;
 }
 
-static struct irqchip sa1111_high_chip = {
+static struct irq_chip sa1111_high_chip = {
+	.name		= "SA1111-h",
 	.ack		= sa1111_ack_irq,
 	.mask		= sa1111_mask_highirq,
 	.unmask		= sa1111_unmask_highirq,
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index a19bc4a..43d2781 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -39,7 +39,8 @@
 	writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
-static struct irqchip vic_chip = {
+static struct irq_chip vic_chip = {
+	.name	= "VIC",
 	.ack	= vic_mask_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index b9a74a7..eca248d 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -470,7 +470,8 @@
 	}
 }
 
-static struct irqchip ecard_chip = {
+static struct irq_chip ecard_chip = {
+	.name	= "ECARD",
 	.ack	= ecard_irq_mask,
 	.mask	= ecard_irq_mask,
 	.unmask = ecard_irq_unmask,
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 626feeec..2e1bf83 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -77,6 +77,7 @@
 		seq_printf(p, "%3d: ", i);
 		for_each_present_cpu(cpu)
 			seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+		seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
 		seq_printf(p, "  %s", action->name);
 		for (action = action->next; action; action = action->next)
 			seq_printf(p, ", %s", action->name);
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index 5783c28..cec199f 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -327,7 +327,8 @@
 	return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
 }
 
-static struct irqchip gpio_irqchip = {
+static struct irq_chip gpio_irqchip = {
+	.name		= "GPIO",
 	.mask		= gpio_irq_mask,
 	.unmask		= gpio_irq_unmask,
 	.set_type	= gpio_irq_type,
diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c
index 9b09113..c3a5e77 100644
--- a/arch/arm/mach-at91rm9200/irq.c
+++ b/arch/arm/mach-at91rm9200/irq.c
@@ -114,7 +114,8 @@
 #define at91_aic_set_wake	NULL
 #endif
 
-static struct irqchip at91_aic_chip = {
+static struct irq_chip at91_aic_chip = {
+	.name		= "AIC",
 	.ack		= at91_aic_mask_irq,
 	.mask		= at91_aic_mask_irq,
 	.unmask		= at91_aic_unmask_irq,
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index a5de5f1..2688bd8 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -204,13 +204,15 @@
 	imx_gpio_handler(mask, irq, desc, regs);
 }
 
-static struct irqchip imx_internal_chip = {
+static struct irq_chip imx_internal_chip = {
+	.name = "MPU",
 	.ack = imx_mask_irq,
 	.mask = imx_mask_irq,
 	.unmask = imx_unmask_irq,
 };
 
-static struct irqchip imx_gpio_chip = {
+static struct irq_chip imx_gpio_chip = {
+	.name = "GPIO",
 	.ack = imx_gpio_ack_irq,
 	.mask = imx_gpio_mask_irq,
 	.unmask = imx_gpio_unmask_irq,
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 6d65c96..191c57a 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -161,7 +161,8 @@
 	writel(1 << irq, VA_IC_BASE + IRQ_ENABLE_SET);
 }
 
-static struct irqchip sc_chip = {
+static struct irq_chip sc_chip = {
+	.name	= "SC",
 	.ack	= sc_mask_irq,
 	.mask	= sc_mask_irq,
 	.unmask = sc_unmask_irq,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 9f55f5a..678b6ba 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -156,7 +156,8 @@
 	cic_writel(1 << irq, INTCP_VA_CIC_BASE + IRQ_ENABLE_SET);
 }
 
-static struct irqchip cic_chip = {
+static struct irq_chip cic_chip = {
+	.name	= "CIC",
 	.ack	= cic_mask_irq,
 	.mask	= cic_mask_irq,
 	.unmask	= cic_unmask_irq,
@@ -174,7 +175,8 @@
 	pic_writel(1 << irq, INTCP_VA_PIC_BASE + IRQ_ENABLE_SET);
 }
 
-static struct irqchip pic_chip = {
+static struct irq_chip pic_chip = {
+	.name	= "PIC",
 	.ack	= pic_mask_irq,
 	.mask	= pic_mask_irq,
 	.unmask = pic_unmask_irq,
@@ -192,7 +194,8 @@
 	sic_writel(1 << irq, INTCP_VA_SIC_BASE + IRQ_ENABLE_SET);
 }
 
-static struct irqchip sic_chip = {
+static struct irq_chip sic_chip = {
+	.name	= "SIC",
 	.ack	= sic_mask_irq,
 	.mask	= sic_mask_irq,
 	.unmask	= sic_unmask_irq,
diff --git a/arch/arm/mach-iop3xx/iop321-irq.c b/arch/arm/mach-iop3xx/iop321-irq.c
index d42aae6..88ac333 100644
--- a/arch/arm/mach-iop3xx/iop321-irq.c
+++ b/arch/arm/mach-iop3xx/iop321-irq.c
@@ -52,7 +52,8 @@
 	intctl_write(iop321_mask);
 }
 
-struct irqchip ext_chip = {
+struct irq_chip ext_chip = {
+	.name	= "IOP",
 	.ack    = iop321_irq_mask,
 	.mask   = iop321_irq_mask,
 	.unmask = iop321_irq_unmask,
diff --git a/arch/arm/mach-iop3xx/iop331-irq.c b/arch/arm/mach-iop3xx/iop331-irq.c
index f4d4321..cab1172 100644
--- a/arch/arm/mach-iop3xx/iop331-irq.c
+++ b/arch/arm/mach-iop3xx/iop331-irq.c
@@ -77,13 +77,15 @@
         intctl_write1(iop331_mask1);
 }
 
-struct irqchip iop331_irqchip1 = {
+struct irq_chip iop331_irqchip1 = {
+	.name	= "IOP-1",
 	.ack    = iop331_irq_mask1,
 	.mask   = iop331_irq_mask1,
 	.unmask = iop331_irq_unmask1,
 };
 
-struct irqchip iop331_irqchip2 = {
+struct irq_chip iop331_irqchip2 = {
+	.name	= "IOP-2",
 	.ack    = iop331_irq_mask2,
 	.mask   = iop331_irq_mask2,
 	.unmask = iop331_irq_unmask2,
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 2cccc27..4f2ab48 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -63,7 +63,8 @@
 	CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask;
 }
 
-static struct irqchip kev7a400_cpld_chip = {
+static struct irq_chip kev7a400_cpld_chip = {
+	.name	= "CPLD",
 	.ack	= kev7a400_ack_cpld_irq,
 	.mask	= kev7a400_mask_cpld_irq,
 	.unmask	= kev7a400_unmask_cpld_irq,
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index 35c3606..a691011 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -200,7 +200,8 @@
 	}
 }
 
-static struct irqchip lpd7a40x_cpld_chip = {
+static struct irq_chip lpd7a40x_cpld_chip = {
+	.name	= "CPLD",
 	.ack	= lh7a40x_ack_cpld_irq,
 	.mask	= lh7a40x_mask_cpld_irq,
 	.unmask	= lh7a40x_unmask_cpld_irq,
diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c
index 8535764..f9b3fe9 100644
--- a/arch/arm/mach-lh7a40x/irq-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-kev7a400.c
@@ -43,7 +43,8 @@
 }
 
 static struct
-irqchip lh7a400_cpld_chip = {
+irq_chip lh7a400_cpld_chip = {
+	.name	= "CPLD",
 	.ack	= lh7a400_ack_cpld_irq,
 	.mask	= lh7a400_mask_cpld_irq,
 	.unmask	= lh7a400_unmask_cpld_irq,
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
index f9fdefe..091b2dc 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c
@@ -38,13 +38,15 @@
 	INTC_INTENC = (1 << irq);
 }
 
-static struct irqchip lh7a400_internal_chip = {
+static struct irq_chip lh7a400_internal_chip = {
+	.name	= "MPU",
 	.ack	= lh7a400_mask_irq, /* Level triggering -> mask is ack */
 	.mask	= lh7a400_mask_irq,
 	.unmask	= lh7a400_unmask_irq,
 };
 
-static struct irqchip lh7a400_gpio_chip = {
+static struct irq_chip lh7a400_gpio_chip = {
+	.name	= "GPIO",
 	.ack	= lh7a400_ack_gpio_irq,
 	.mask	= lh7a400_mask_irq,
 	.unmask	= lh7a400_unmask_irq,
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index 2685a81..7059b98 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -76,25 +76,29 @@
 	VIC2_INTENCLR = (1 << irq);
 }
 
-static struct irqchip lh7a404_vic1_chip = {
+static struct irq_chip lh7a404_vic1_chip = {
+	.name	= "VIC1",
 	.ack	= lh7a404_vic1_mask_irq, /* Because level-triggered */
 	.mask	= lh7a404_vic1_mask_irq,
 	.unmask	= lh7a404_vic1_unmask_irq,
 };
 
-static struct irqchip lh7a404_vic2_chip = {
+static struct irq_chip lh7a404_vic2_chip = {
+	.name	= "VIC2",
 	.ack	= lh7a404_vic2_mask_irq, /* Because level-triggered */
 	.mask	= lh7a404_vic2_mask_irq,
 	.unmask	= lh7a404_vic2_unmask_irq,
 };
 
-static struct irqchip lh7a404_gpio_vic1_chip = {
+static struct irq_chip lh7a404_gpio_vic1_chip = {
+	.name	= "GPIO-VIC1",
 	.ack	= lh7a404_vic1_ack_gpio_irq,
 	.mask	= lh7a404_vic1_mask_irq,
 	.unmask	= lh7a404_vic1_unmask_irq,
 };
 
-static struct irqchip lh7a404_gpio_vic2_chip = {
+static struct irq_chip lh7a404_gpio_vic2_chip = {
+	.name	= "GPIO-VIC2",
 	.ack	= lh7a404_vic2_ack_gpio_irq,
 	.mask	= lh7a404_vic2_mask_irq,
 	.unmask	= lh7a404_vic2_unmask_irq,
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index dcb4e17..d6055dd 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -50,7 +50,8 @@
 	}
 }
 
-static struct irqchip lh7a40x_cpld_chip = {
+static struct irq_chip lh7a40x_cpld_chip = {
+	.name	= "CPLD",
 	.ack	= lh7a40x_ack_cpld_irq,
 	.mask	= lh7a40x_mask_cpld_irq,
 	.unmask	= lh7a40x_unmask_cpld_irq,
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 34eb79e..efe9bfc 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -106,14 +106,16 @@
 	}
 }
 
-static struct irqchip omap_fpga_irq_ack = {
+static struct irq_chip omap_fpga_irq_ack = {
+	.name		= "FPGA-ack",
 	.ack		= fpga_mask_ack_irq,
 	.mask		= fpga_mask_irq,
 	.unmask		= fpga_unmask_irq,
 };
 
 
-static struct irqchip omap_fpga_irq = {
+static struct irq_chip omap_fpga_irq = {
+	.name		= "FPGA",
 	.ack		= fpga_ack_irq,
 	.mask		= fpga_mask_irq,
 	.unmask		= fpga_unmask_irq,
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 9e03984..3ea140b 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -168,7 +168,8 @@
 };
 #endif
 
-static struct irqchip omap_irq_chip = {
+static struct irq_chip omap_irq_chip = {
+	.name		= "MPU",
 	.ack		= omap_mask_ack_irq,
 	.mask		= omap_mask_irq,
 	.unmask		= omap_unmask_irq,
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3eed6a7..dfc3b35 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -94,7 +94,8 @@
 	omap_ack_irq(irq);
 }
 
-static struct irqchip omap_irq_chip = {
+static struct irq_chip omap_irq_chip = {
+	.name	= "INTC",
 	.ack	= omap_mask_ack_irq,
 	.mask	= omap_mask_irq,
 	.unmask	= omap_unmask_irq,
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index d9635ff..12141e2 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -39,7 +39,8 @@
 	ICMR |= (1 << (irq + PXA_IRQ_SKIP));
 }
 
-static struct irqchip pxa_internal_chip_low = {
+static struct irq_chip pxa_internal_chip_low = {
+	.name		= "SC",
 	.ack		= pxa_mask_low_irq,
 	.mask		= pxa_mask_low_irq,
 	.unmask		= pxa_unmask_low_irq,
@@ -61,7 +62,8 @@
 	ICMR2 |= (1 << (irq - 32 + PXA_IRQ_SKIP));
 }
 
-static struct irqchip pxa_internal_chip_high = {
+static struct irq_chip pxa_internal_chip_high = {
+	.name		= "SC-hi",
 	.ack		= pxa_mask_high_irq,
 	.mask		= pxa_mask_high_irq,
 	.unmask		= pxa_unmask_high_irq,
@@ -129,7 +131,8 @@
 	GEDR0 = (1 << (irq - IRQ_GPIO0));
 }
 
-static struct irqchip pxa_low_gpio_chip = {
+static struct irq_chip pxa_low_gpio_chip = {
+	.name		= "GPIO-l",
 	.ack		= pxa_ack_low_gpio,
 	.mask		= pxa_mask_low_irq,
 	.unmask		= pxa_unmask_low_irq,
@@ -237,7 +240,8 @@
 	GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
 }
 
-static struct irqchip pxa_muxed_gpio_chip = {
+static struct irq_chip pxa_muxed_gpio_chip = {
+	.name		= "GPIO",
 	.ack		= pxa_ack_muxed_gpio,
 	.mask		= pxa_mask_muxed_gpio,
 	.unmask		= pxa_unmask_muxed_gpio,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1a5f5c2..12479ae 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -68,7 +68,8 @@
 	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
 }
 
-static struct irqchip lpd270_irq_chip = {
+static struct irq_chip lpd270_irq_chip = {
+	.name		= "CPLD",
 	.ack		= lpd270_mask_irq,
 	.mask		= lpd270_mask_irq,
 	.unmask		= lpd270_unmask_irq,
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 6a9a669..83ff5ce 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -78,7 +78,8 @@
 	LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
 }
 
-static struct irqchip lubbock_irq_chip = {
+static struct irq_chip lubbock_irq_chip = {
+	.name		= "FPGA",
 	.ack		= lubbock_mask_irq,
 	.mask		= lubbock_mask_irq,
 	.unmask		= lubbock_unmask_irq,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 21ddf3d..a7e9b96 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -64,7 +64,8 @@
 	MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
 }
 
-static struct irqchip mainstone_irq_chip = {
+static struct irq_chip mainstone_irq_chip = {
+	.name		= "FPGA",
 	.ack		= mainstone_mask_irq,
 	.mask		= mainstone_mask_irq,
 	.unmask		= mainstone_unmask_irq,
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 2891b8c..b55b90a 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -95,7 +95,8 @@
 	return 0;
 }
 
-static struct irqchip sa1100_low_gpio_chip = {
+static struct irq_chip sa1100_low_gpio_chip = {
+	.name		= "GPIO-l",
 	.ack		= sa1100_low_gpio_ack,
 	.mask		= sa1100_low_gpio_mask,
 	.unmask		= sa1100_low_gpio_unmask,
@@ -178,7 +179,8 @@
 	return 0;
 }
 
-static struct irqchip sa1100_high_gpio_chip = {
+static struct irq_chip sa1100_high_gpio_chip = {
+	.name		= "GPIO-h",
 	.ack		= sa1100_high_gpio_ack,
 	.mask		= sa1100_high_gpio_mask,
 	.unmask		= sa1100_high_gpio_unmask,
@@ -215,7 +217,8 @@
 	return -EINVAL;
 }
 
-static struct irqchip sa1100_normal_chip = {
+static struct irq_chip sa1100_normal_chip = {
+	.name		= "SC",
 	.ack		= sa1100_mask_irq,
 	.mask		= sa1100_mask_irq,
 	.unmask		= sa1100_unmask_irq,
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
index 6cb67bd..b227052 100644
--- a/arch/arm/mach-shark/irq.c
+++ b/arch/arm/mach-shark/irq.c
@@ -69,7 +69,8 @@
 
 static struct irqaction cascade;
 
-static struct irqchip fb_chip = {
+static struct irq_chip fb_chip = {
+	.name	= "XT-PIC",
 	.ack	= shark_ack_8259A_irq,
 	.mask	= shark_disable_8259A_irq,
 	.unmask = shark_enable_8259A_irq,
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 8643771..c4e3f8c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -69,7 +69,8 @@
 	writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET);
 }
 
-static struct irqchip sic_chip = {
+static struct irq_chip sic_chip = {
+	.name	= "SIC",
 	.ack	= sic_mask_irq,
 	.mask	= sic_mask_irq,
 	.unmask	= sic_unmask_irq,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index fec7970..cd7f973 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -944,7 +944,8 @@
 	_set_gpio_irqenable(bank, gpio, 1);
 }
 
-static struct irqchip gpio_irq_chip = {
+static struct irq_chip gpio_irq_chip = {
+	.name		= "GPIO",
 	.ack		= gpio_ack_irq,
 	.mask		= gpio_mask_irq,
 	.unmask		= gpio_unmask_irq,
@@ -952,10 +953,11 @@
 	.set_wake	= gpio_wake_enable,
 };
 
-static struct irqchip mpuio_irq_chip = {
+static struct irq_chip mpuio_irq_chip = {
+	.name	= "MPUIO",
 	.ack	= mpuio_ack_irq,
 	.mask	= mpuio_mask_irq,
-	.unmask = mpuio_unmask_irq
+	.unmask	= mpuio_unmask_irq
 };
 
 static int initialized;
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index d464dde..6f81042 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -513,6 +513,7 @@
 	swapgs	
 1:	incl	%gs:pda_irqcount	# RED-PEN should check preempt count
 	cmoveq %gs:pda_irqstackptr,%rsp
+	push    %rbp			# backlink for old unwinder
 	/*
 	 * We entered an interrupt context - irqs are off:
 	 */
@@ -1139,18 +1140,21 @@
 END(machine_check)
 #endif
 
+/* Call softirq on interrupt stack. Interrupts are off. */
 ENTRY(call_softirq)
 	CFI_STARTPROC
-	movq %gs:pda_irqstackptr,%rax
-	movq %rsp,%rdx
-	CFI_DEF_CFA_REGISTER	rdx
+	push %rbp
+	CFI_ADJUST_CFA_OFFSET	8
+	CFI_REL_OFFSET rbp,0
+	mov  %rsp,%rbp
+	CFI_DEF_CFA_REGISTER rbp
 	incl %gs:pda_irqcount
-	cmove %rax,%rsp
-	pushq %rdx
-	/*todo CFI_DEF_CFA_EXPRESSION ...*/
+	cmove %gs:pda_irqstackptr,%rsp
+	push  %rbp			# backlink for old unwinder
 	call __do_softirq
-	popq %rsp
+	leaveq
 	CFI_DEF_CFA_REGISTER	rsp
+	CFI_ADJUST_CFA_OFFSET   -8
 	decl %gs:pda_irqcount
 	ret
 	CFI_ENDPROC
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c
index c4c3cc3..aad7609 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@@ -92,5 +92,7 @@
 {
 	if (dma_ops)
 		return;
+
+	force_iommu = 0; /* no HW IOMMU */
 	dma_ops = &nommu_dma_ops;
 }
diff --git a/drivers/scsi/aic7xxx/aicasm/Makefile b/drivers/scsi/aic7xxx/aicasm/Makefile
index 8c91fda..b98c5c1 100644
--- a/drivers/scsi/aic7xxx/aicasm/Makefile
+++ b/drivers/scsi/aic7xxx/aicasm/Makefile
@@ -14,6 +14,8 @@
 clean-files:= ${GENSRCS} ${GENHDRS} $(YSRCS:.y=.output) $(PROG)
 # Override default kernel CFLAGS.  This is a userland app.
 AICASM_CFLAGS:= -I/usr/include -I.
+LEX= flex
+YACC= bison
 YFLAGS= -d
 
 NOMAN=	noman
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 2ee742d..0050431 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -24,7 +24,7 @@
 	default y if ARCH_S3C2410
 	default y if PXA27x
 	default y if ARCH_EP93XX
-	default y if ARCH_AT91RM9200
+	default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
 	# PPC:
 	default y if STB03xxx
 	default y if PPC_MPC52xx
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index f7bdd94..218621b 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -517,19 +517,19 @@
 
 static struct usb_device *usbdev_lookup_minor(int minor)
 {
-	struct device *device;
-	struct usb_device *udev = NULL;
+	struct class_device *class_dev;
+	struct usb_device *dev = NULL;
 
 	down(&usb_device_class->sem);
-	list_for_each_entry(device, &usb_device_class->devices, node) {
-		if (device->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
-			udev = device->platform_data;
+	list_for_each_entry(class_dev, &usb_device_class->children, node) {
+		if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
+			dev = class_dev->class_data;
 			break;
 		}
 	}
 	up(&usb_device_class->sem);
 
-	return udev;
+	return dev;
 };
 
 /*
@@ -1580,16 +1580,16 @@
 {
 	int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1);
 
-	dev->usbfs_dev = device_create(usb_device_class, &dev->dev,
-				MKDEV(USB_DEVICE_MAJOR, minor),
+	dev->class_dev = class_device_create(usb_device_class, NULL,
+				MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev,
 				"usbdev%d.%d", dev->bus->busnum, dev->devnum);
 
-	dev->usbfs_dev->platform_data = dev;
+	dev->class_dev->class_data = dev;
 }
 
 static void usbdev_remove(struct usb_device *dev)
 {
-	device_unregister(dev->usbfs_dev);
+	class_device_unregister(dev->class_dev);
 }
 
 static int usbdev_notify(struct notifier_block *self, unsigned long action,
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index abee0f5..8de4f8c 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -194,13 +194,14 @@
 		++temp;
 	else
 		temp = name;
-	intf->usb_dev = device_create(usb_class->class, &intf->dev,
-				      MKDEV(USB_MAJOR, minor), "%s", temp);
-	if (IS_ERR(intf->usb_dev)) {
+	intf->class_dev = class_device_create(usb_class->class, NULL,
+					      MKDEV(USB_MAJOR, minor),
+					      &intf->dev, "%s", temp);
+	if (IS_ERR(intf->class_dev)) {
 		spin_lock (&minor_lock);
 		usb_minors[intf->minor] = NULL;
 		spin_unlock (&minor_lock);
-		retval = PTR_ERR(intf->usb_dev);
+		retval = PTR_ERR(intf->class_dev);
 	}
 exit:
 	return retval;
@@ -241,8 +242,8 @@
 	spin_unlock (&minor_lock);
 
 	snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base);
-	device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
-	intf->usb_dev = NULL;
+	class_device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
+	intf->class_dev = NULL;
 	intf->minor = -1;
 	destroy_usb_class();
 }
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 363b2ad..1a32d96 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -207,7 +207,7 @@
 
 config USB_GADGET_DUMMY_HCD
 	boolean "Dummy HCD (DEVELOPMENT)"
-	depends on USB && EXPERIMENTAL
+	depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL
 	select USB_GADGET_DUALSPEED
 	help
 	  This host controller driver emulates USB, looping all data transfer
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 1c459ff..cfebca0 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -57,19 +57,23 @@
 
 /*
  * This controller is simple and PIO-only.  It's used in many AT91-series
- * ARMv4T controllers, including the at91rm9200 (arm920T, with MMU),
- * at91sam9261 (arm926ejs, with MMU), and several no-mmu versions.
+ * full speed USB controllers, including the at91rm9200 (arm920T, with MMU),
+ * at91sam926x (arm926ejs, with MMU), and several no-mmu versions.
  *
  * This driver expects the board has been wired with two GPIOs suppporting
  * a VBUS sensing IRQ, and a D+ pullup.  (They may be omitted, but the
- * testing hasn't covered such cases.)  The pullup is most important; it
+ * testing hasn't covered such cases.)
+ *
+ * The pullup is most important (so it's integrated on sam926x parts).  It
  * provides software control over whether the host enumerates the device.
+ *
  * The VBUS sensing helps during enumeration, and allows both USB clocks
  * (and the transceiver) to stay gated off until they're necessary, saving
- * power.  During USB suspend, the 48 MHz clock is gated off.
+ * power.  During USB suspend, the 48 MHz clock is gated off in hardware;
+ * it may also be gated off by software during some Linux sleep states.
  */
 
-#define	DRIVER_VERSION	"8 March 2005"
+#define	DRIVER_VERSION	"3 May 2006"
 
 static const char driver_name [] = "at91_udc";
 static const char ep0name[] = "ep0";
@@ -316,9 +320,15 @@
  *
  * There are also state bits like FORCESTALL, EPEDS, DIR, and EPTYPE
  * that shouldn't normally be changed.
+ *
+ * NOTE at91sam9260 docs mention synch between UDPCK and MCK clock domains,
+ * implying a need to wait for one write to complete (test relevant bits)
+ * before starting the next write.  This shouldn't be an issue given how
+ * infrequently we write, except maybe for write-then-read idioms.
  */
 #define	SET_FX	(AT91_UDP_TXPKTRDY)
-#define	CLR_FX	(RX_DATA_READY | AT91_UDP_RXSETUP | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)
+#define	CLR_FX	(RX_DATA_READY | AT91_UDP_RXSETUP \
+		| AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)
 
 /* pull OUT packet data from the endpoint's fifo */
 static int read_fifo (struct at91_ep *ep, struct at91_request *req)
@@ -472,7 +482,8 @@
 
 /*-------------------------------------------------------------------------*/
 
-static int at91_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+static int at91_ep_enable(struct usb_ep *_ep,
+				const struct usb_endpoint_descriptor *desc)
 {
 	struct at91_ep	*ep = container_of(_ep, struct at91_ep, ep);
 	struct at91_udc	*dev = ep->udc;
@@ -582,11 +593,12 @@
  * interesting for request or buffer allocation.
  */
 
-static struct usb_request *at91_ep_alloc_request (struct usb_ep *_ep, unsigned int gfp_flags)
+static struct usb_request *
+at91_ep_alloc_request(struct usb_ep *_ep, unsigned int gfp_flags)
 {
 	struct at91_request *req;
 
-	req = kcalloc(1, sizeof (struct at91_request), SLAB_KERNEL);
+	req = kcalloc(1, sizeof (struct at91_request), gfp_flags);
 	if (!req)
 		return NULL;
 
@@ -862,6 +874,7 @@
 	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
 		driver = NULL;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->suspended = 0;
 
 	for (i = 0; i < NUM_ENDPOINTS; i++) {
 		struct at91_ep *ep = &udc->ep[i];
@@ -889,8 +902,8 @@
 		return;
 	udc->clocked = 0;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	clk_disable(udc->iclk);
 	clk_disable(udc->fclk);
+	clk_disable(udc->iclk);
 }
 
 /*
@@ -911,9 +924,6 @@
 		at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 		at91_set_gpio_value(udc->board.pullup_pin, 0);
 		clk_off(udc);
-
-		// REVISIT:  with transceiver disabled, will D- float
-		// so that a host would falsely detect a device?
 	}
 }
 
@@ -1290,7 +1300,8 @@
 			if (udc->wait_for_addr_ack) {
 				u32	tmp;
 
-				at91_udp_write(AT91_UDP_FADDR, AT91_UDP_FEN | udc->addr);
+				at91_udp_write(AT91_UDP_FADDR,
+						AT91_UDP_FEN | udc->addr);
 				tmp = at91_udp_read(AT91_UDP_GLB_STAT);
 				tmp &= ~AT91_UDP_FADDEN;
 				if (udc->addr)
@@ -1361,9 +1372,10 @@
 	u32			rescans = 5;
 
 	while (rescans--) {
-		u32	status = at91_udp_read(AT91_UDP_ISR);
+		u32 status;
 
-		status &= at91_udp_read(AT91_UDP_IMR);
+		status = at91_udp_read(AT91_UDP_ISR)
+			& at91_udp_read(AT91_UDP_IMR);
 		if (!status)
 			break;
 
@@ -1379,18 +1391,17 @@
 			stop_activity(udc);
 
 			/* enable ep0 */
-			at91_udp_write(AT91_UDP_CSR(0), AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
+			at91_udp_write(AT91_UDP_CSR(0),
+					AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
 			udc->gadget.speed = USB_SPEED_FULL;
 			udc->suspended = 0;
 			at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0));
 
 			/*
 			 * NOTE:  this driver keeps clocks off unless the
-			 * USB host is present.  That saves power, and also
-			 * eliminates IRQs (reset, resume, suspend) that can
-			 * otherwise flood from the controller.  If your
-			 * board doesn't support VBUS detection, suspend and
-			 * resume irq logic may need more attention...
+			 * USB host is present.  That saves power, but for
+			 * boards that don't support VBUS detection, both
+			 * clocks need to be active most of the time.
 			 */
 
 		/* host initiated suspend (3+ms bus idle) */
@@ -1452,13 +1463,19 @@
 
 /*-------------------------------------------------------------------------*/
 
+static void nop_release(struct device *dev)
+{
+	/* nothing to free */
+}
+
 static struct at91_udc controller = {
 	.gadget = {
-		.ops = &at91_udc_ops,
-		.ep0 = &controller.ep[0].ep,
-		.name = driver_name,
-		.dev = {
-			.bus_id = "gadget"
+		.ops	= &at91_udc_ops,
+		.ep0	= &controller.ep[0].ep,
+		.name	= driver_name,
+		.dev	= {
+			.bus_id = "gadget",
+			.release = nop_release,
 		}
 	},
 	.ep[0] = {
@@ -1468,7 +1485,8 @@
 		},
 		.udc		= &controller,
 		.maxpacket	= 8,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(0)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(0)),
 		.int_mask	= 1 << 0,
 	},
 	.ep[1] = {
@@ -1479,7 +1497,8 @@
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 64,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(1)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(1)),
 		.int_mask	= 1 << 1,
 	},
 	.ep[2] = {
@@ -1490,7 +1509,8 @@
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 64,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(2)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(2)),
 		.int_mask	= 1 << 2,
 	},
 	.ep[3] = {
@@ -1501,7 +1521,8 @@
 		},
 		.udc		= &controller,
 		.maxpacket	= 8,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(3)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(3)),
 		.int_mask	= 1 << 3,
 	},
 	.ep[4] = {
@@ -1512,7 +1533,8 @@
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 256,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(4)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(4)),
 		.int_mask	= 1 << 4,
 	},
 	.ep[5] = {
@@ -1523,10 +1545,11 @@
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 256,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(5)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(5)),
 		.int_mask	= 1 << 5,
 	},
-	/* ep6 and ep7 are also reserved */
+	/* ep6 and ep7 are also reserved (custom silicon might use them) */
 };
 
 static irqreturn_t at91_vbus_irq(int irq, void *_udc, struct pt_regs *r)
@@ -1593,6 +1616,7 @@
 
 	local_irq_disable();
 	udc->enabled = 0;
+	at91_udp_write(AT91_UDP_IDR, ~0);
 	pullup(udc, 0);
 	local_irq_enable();
 
@@ -1624,6 +1648,16 @@
 		return -ENODEV;
 	}
 
+	if (pdev->num_resources != 2) {
+		DBG("invalid num_resources");
+		return -ENODEV;
+	}
+	if ((pdev->resource[0].flags != IORESOURCE_MEM)
+			|| (pdev->resource[1].flags != IORESOURCE_IRQ)) {
+		DBG("invalid resource type");
+		return -ENODEV;
+	}
+
 	if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) {
 		DBG("someone's using UDC memory\n");
 		return -EBUSY;
@@ -1649,19 +1683,26 @@
 	if (retval < 0)
 		goto fail0;
 
-	/* disable everything until there's a gadget driver and vbus */
-	pullup(udc, 0);
+	/* don't do anything until we have both gadget driver and VBUS */
+	clk_enable(udc->iclk);
+	at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+	at91_udp_write(AT91_UDP_IDR, 0xffffffff);
+	clk_disable(udc->iclk);
 
 	/* request UDC and maybe VBUS irqs */
-	if (request_irq(AT91_ID_UDP, at91_udc_irq, IRQF_DISABLED, driver_name, udc)) {
-		DBG("request irq %d failed\n", AT91_ID_UDP);
+	udc->udp_irq = platform_get_irq(pdev, 0);
+	if (request_irq(udc->udp_irq, at91_udc_irq,
+			IRQF_DISABLED, driver_name, udc)) {
+		DBG("request irq %d failed\n", udc->udp_irq);
 		retval = -EBUSY;
 		goto fail1;
 	}
 	if (udc->board.vbus_pin > 0) {
-		if (request_irq(udc->board.vbus_pin, at91_vbus_irq, IRQF_DISABLED, driver_name, udc)) {
-			DBG("request vbus irq %d failed\n", udc->board.vbus_pin);
-			free_irq(AT91_ID_UDP, udc);
+		if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
+				IRQF_DISABLED, driver_name, udc)) {
+			DBG("request vbus irq %d failed\n",
+					udc->board.vbus_pin);
+			free_irq(udc->udp_irq, udc);
 			retval = -EBUSY;
 			goto fail1;
 		}
@@ -1670,6 +1711,7 @@
 		udc->vbus = 1;
 	}
 	dev_set_drvdata(dev, udc);
+	device_init_wakeup(dev, 1);
 	create_debug_file(udc);
 
 	INFO("%s version %s\n", driver_name, DRIVER_VERSION);
@@ -1678,14 +1720,14 @@
 fail1:
 	device_unregister(&udc->gadget.dev);
 fail0:
-	release_mem_region(AT91_VA_BASE_UDP, SZ_16K);
+	release_mem_region(AT91_BASE_UDP, SZ_16K);
 	DBG("%s probe failed, %d\n", driver_name, retval);
 	return retval;
 }
 
-static int __devexit at91udc_remove(struct platform_device *dev)
+static int __devexit at91udc_remove(struct platform_device *pdev)
 {
-	struct at91_udc *udc = platform_get_drvdata(dev);
+	struct at91_udc *udc = platform_get_drvdata(pdev);
 
 	DBG("remove\n");
 
@@ -1694,10 +1736,11 @@
 	if (udc->driver != 0)
 		usb_gadget_unregister_driver(udc->driver);
 
+	device_init_wakeup(&pdev->dev, 0);
 	remove_debug_file(udc);
 	if (udc->board.vbus_pin > 0)
 		free_irq(udc->board.vbus_pin, udc);
-	free_irq(AT91_ID_UDP, udc);
+	free_irq(udc->udp_irq, udc);
 	device_unregister(&udc->gadget.dev);
 	release_mem_region(AT91_BASE_UDP, SZ_16K);
 
@@ -1708,31 +1751,36 @@
 }
 
 #ifdef CONFIG_PM
-static int at91udc_suspend(struct platform_device *dev, pm_message_t mesg)
+static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	struct at91_udc *udc = platform_get_drvdata(dev);
+	struct at91_udc *udc = platform_get_drvdata(pdev);
+	int		wake = udc->driver && device_may_wakeup(&pdev->dev);
 
-	/*
-	 * The "safe" suspend transitions are opportunistic ... e.g. when
-	 * the USB link is suspended (48MHz clock autogated off), or when
-	 * it's disconnected (programmatically gated off, elsewhere).
-	 * Then we can suspend, and the chip can enter slow clock mode.
-	 *
-	 * The problem case is some component (user mode?) suspending this
-	 * device while it's active, with the 48 MHz clock in use.  There
-	 * are two basic approaches:  (a) veto suspend levels involving slow
-	 * clock mode, (b) disconnect, so 48 MHz will no longer be in use
-	 * and we can enter slow clock mode.  This uses (b) for now, since
-	 * it's simplest until AT91 PM exists and supports the other option.
+	/* Unless we can act normally to the host (letting it wake us up
+	 * whenever it has work for us) force disconnect.  Wakeup requires
+	 * PLLB for USB events (signaling for reset, wakeup, or incoming
+	 * tokens) and VBUS irqs (on systems which support them).
 	 */
-	if (udc->vbus && !udc->suspended)
+	if ((!udc->suspended && udc->addr)
+			|| !wake
+			|| at91_suspend_entering_slow_clock()) {
 		pullup(udc, 0);
+		disable_irq_wake(udc->udp_irq);
+	} else
+		enable_irq_wake(udc->udp_irq);
+
+	if (udc->board.vbus_pin > 0) {
+		if (wake)
+			enable_irq_wake(udc->board.vbus_pin);
+		else
+			disable_irq_wake(udc->board.vbus_pin);
+	}
 	return 0;
 }
 
-static int at91udc_resume(struct platform_device *dev)
+static int at91udc_resume(struct platform_device *pdev)
 {
-	struct at91_udc *udc = platform_get_drvdata(dev);
+	struct at91_udc *udc = platform_get_drvdata(pdev);
 
 	/* maybe reconnect to host; if so, clocks on */
 	pullup(udc, 1);
@@ -1748,7 +1796,7 @@
 	.remove		= __devexit_p(at91udc_remove),
 	.shutdown	= at91udc_shutdown,
 	.suspend	= at91udc_suspend,
-	.resume 	= at91udc_resume,
+	.resume		= at91udc_resume,
 	.driver		= {
 		.name	= (char *) driver_name,
 		.owner	= THIS_MODULE,
@@ -1767,6 +1815,6 @@
 }
 module_exit(udc_exit_module);
 
-MODULE_DESCRIPTION("AT91RM9200 udc driver");
+MODULE_DESCRIPTION("AT91 udc driver");
 MODULE_AUTHOR("Thomas Rathbone, David Brownell");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index 5a4799c..882af42 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -141,6 +141,7 @@
 	struct clk			*iclk, *fclk;
 	struct platform_device		*pdev;
 	struct proc_dir_entry		*pde;
+	int				udp_irq;
 };
 
 static inline struct at91_udc *to_udc(struct usb_gadget *g)
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 4be4719..7d1c22c 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -609,7 +609,8 @@
 	if (!dum->driver)
 		return -ESHUTDOWN;
 
-	spin_lock_irqsave (&dum->lock, flags);
+	local_irq_save (flags);
+	spin_lock (&dum->lock);
 	list_for_each_entry (req, &ep->queue, queue) {
 		if (&req->req == _req) {
 			list_del_init (&req->queue);
@@ -618,7 +619,7 @@
 			break;
 		}
 	}
-	spin_unlock_irqrestore (&dum->lock, flags);
+	spin_unlock (&dum->lock);
 
 	if (retval == 0) {
 		dev_dbg (udc_dev(dum),
@@ -626,6 +627,7 @@
 				req, _ep->name, _req->length, _req->buf);
 		_req->complete (_ep, _req);
 	}
+	local_irq_restore (flags);
 	return retval;
 }
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 85b0b4a..d63177a 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -892,7 +892,7 @@
 #define	PCI_DRIVER		ehci_pci_driver
 #endif
 
-#ifdef CONFIG_PPC_83xx
+#ifdef CONFIG_MPC834x
 #include "ehci-fsl.c"
 #define	PLATFORM_DRIVER		ehci_fsl_driver
 #endif
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index cdbafb7..85cc059 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -4,7 +4,7 @@
  *  Copyright (C) 2004 SAN People (Pty) Ltd.
  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
  *
- * AT91RM9200 Bus Glue
+ * AT91 Bus Glue
  *
  * Based on fragments of 2.4 driver by Rick Bronson.
  * Based on ohci-omap.c
@@ -19,12 +19,13 @@
 #include <asm/hardware.h>
 #include <asm/arch/board.h>
 
-#ifndef CONFIG_ARCH_AT91RM9200
-#error "CONFIG_ARCH_AT91RM9200 must be defined."
+#ifndef CONFIG_ARCH_AT91
+#error "CONFIG_ARCH_AT91 must be defined."
 #endif
 
 /* interface and function clocks */
 static struct clk *iclk, *fclk;
+static int clocked;
 
 extern int usb_disabled(void);
 
@@ -35,13 +36,14 @@
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 	struct ohci_regs __iomem *regs = hcd->regs;
 
-	dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n");
+	dev_dbg(&pdev->dev, "start\n");
 
 	/*
 	 * Start the USB clocks.
 	 */
 	clk_enable(iclk);
 	clk_enable(fclk);
+	clocked = 1;
 
 	/*
 	 * The USB host controller must remain in reset.
@@ -54,7 +56,7 @@
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 	struct ohci_regs __iomem *regs = hcd->regs;
 
-	dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n");
+	dev_dbg(&pdev->dev, "stop\n");
 
 	/*
 	 * Put the USB host controller into reset.
@@ -66,6 +68,7 @@
 	 */
 	clk_disable(fclk);
 	clk_disable(iclk);
+	clocked = 0;
 }
 
 
@@ -78,14 +81,15 @@
 
 
 /**
- * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs
+ * usb_hcd_at91_probe - initialize AT91-based HCDs
  * Context: !in_interrupt()
  *
  * Allocates basic resources for this USB host controller, and
  * then invokes the start() method for the HCD associated with it
  * through the hotplug entry's driver_data.
  */
-int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev)
+static int usb_hcd_at91_probe(const struct hc_driver *driver,
+			struct platform_device *pdev)
 {
 	int retval;
 	struct usb_hcd *hcd = NULL;
@@ -95,12 +99,13 @@
 		return -ENODEV;
 	}
 
-	if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
+	if ((pdev->resource[0].flags != IORESOURCE_MEM)
+			|| (pdev->resource[1].flags != IORESOURCE_IRQ)) {
 		pr_debug("hcd probe: invalid resource type\n");
 		return -ENODEV;
 	}
 
-	hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200");
+	hcd = usb_create_hcd(driver, &pdev->dev, "at91");
 	if (!hcd)
 		return -ENOMEM;
 	hcd->rsrc_start = pdev->resource[0].start;
@@ -149,21 +154,23 @@
 /* may be called with controller, bus, and devices active */
 
 /**
- * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs
+ * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
  * @dev: USB Host Controller being removed
  * Context: !in_interrupt()
  *
  * Reverses the effect of usb_hcd_at91_probe(), first invoking
  * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
+ * context, "rmmod" or something similar.
  *
  */
-static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev)
+static int usb_hcd_at91_remove(struct usb_hcd *hcd,
+				struct platform_device *pdev)
 {
 	usb_remove_hcd(hcd);
 	at91_stop_hc(pdev);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	disable_irq_wake(hcd->irq);
 
 	clk_put(fclk);
 	clk_put(iclk);
@@ -178,19 +185,21 @@
 static int __devinit
 ohci_at91_start (struct usb_hcd *hcd)
 {
-//	struct at91_ohci_data	*board = hcd->self.controller->platform_data;
+	struct at91_usbh_data	*board = hcd->self.controller->platform_data;
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	struct usb_device	*root = hcd->self.root_hub;
 	int			ret;
 
 	if ((ret = ohci_init(ohci)) < 0)
 		return ret;
 
+	root->maxchild = board->ports;
+
 	if ((ret = ohci_run(ohci)) < 0) {
 		err("can't start %s", hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
-//	hcd->self.root_hub->maxchild = board->ports;
 	return 0;
 }
 
@@ -198,7 +207,7 @@
 
 static const struct hc_driver ohci_at91_hc_driver = {
 	.description =		hcd_name,
-	.product_desc =		"AT91RM9200 OHCI",
+	.product_desc =		"AT91 OHCI",
 	.hcd_priv_size =	sizeof(struct ohci_hcd),
 
 	/*
@@ -240,33 +249,54 @@
 
 /*-------------------------------------------------------------------------*/
 
-static int ohci_hcd_at91_drv_probe(struct platform_device *dev)
+static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 {
-	return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev);
+	device_init_wakeup(&pdev->dev, 1);
+	return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
 }
 
-static int ohci_hcd_at91_drv_remove(struct platform_device *dev)
+static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 {
-	return usb_hcd_at91_remove(platform_get_drvdata(dev), dev);
+	device_init_wakeup(&pdev->dev, 0);
+	return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
 }
 
 #ifdef CONFIG_PM
 
-/* REVISIT suspend/resume look "too" simple here */
-
 static int
-ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg)
+ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	clk_disable(fclk);
-	clk_disable(iclk);
+	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(hcd->irq);
+	else
+		disable_irq_wake(hcd->irq);
+
+	/*
+	 * The integrated transceivers seem unable to notice disconnect,
+	 * reconnect, or wakeup without the 48 MHz clock active.  so for
+	 * correctness, always discard connection state (using reset).
+	 *
+	 * REVISIT: some boards will be able to turn VBUS off...
+	 */
+	if (at91_suspend_entering_slow_clock()) {
+		ohci_usb_reset (ohci);
+		clk_disable(fclk);
+		clk_disable(iclk);
+		clocked = 0;
+	}
 
 	return 0;
 }
 
-static int ohci_hcd_at91_drv_resume(struct platform_device *dev)
+static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
 {
-	clk_enable(iclk);
-	clk_enable(fclk);
+	if (!clocked) {
+		clk_enable(iclk);
+		clk_enable(fclk);
+	}
 
 	return 0;
 }
@@ -275,7 +305,7 @@
 #define ohci_hcd_at91_drv_resume  NULL
 #endif
 
-MODULE_ALIAS("at91rm9200-ohci");
+MODULE_ALIAS("at91_ohci");
 
 static struct platform_driver ohci_hcd_at91_driver = {
 	.probe		= ohci_hcd_at91_drv_probe,
@@ -283,7 +313,7 @@
 	.suspend	= ohci_hcd_at91_drv_suspend,
 	.resume		= ohci_hcd_at91_drv_resume,
 	.driver		= {
-		.name	= "at91rm9200-ohci",
+		.name	= "at91_ohci",
 		.owner	= THIS_MODULE,
 	},
 };
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index afef5ac..94d8cf4 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -913,7 +913,7 @@
 #include "ohci-ppc-soc.c"
 #endif
 
-#ifdef CONFIG_ARCH_AT91RM9200
+#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
 #include "ohci-at91.c"
 #endif
 
@@ -927,6 +927,7 @@
       || defined (CONFIG_SOC_AU1X00) \
       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
       || defined (CONFIG_ARCH_AT91RM9200) \
+      || defined (CONFIG_ARCH_AT91SAM9261) \
 	)
 #error "missing bus glue for ohci-hcd"
 #endif
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index c9d72ac..66c3f61 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -943,7 +943,9 @@
 			/* We received a short packet */
 			if (urb->transfer_flags & URB_SHORT_NOT_OK)
 				ret = -EREMOTEIO;
-			else if (ctrlstat & TD_CTRL_SPD)
+
+			/* Fixup needed only if this isn't the URB's last TD */
+			else if (&td->list != urbp->td_list.prev)
 				ret = 1;
 		}
 
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index 05d2d60..df198cf 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -152,9 +152,8 @@
  * events. The hardware generates 5 events for the first keypress
  * and we have to take this into account for an accurate repeat
  * behaviour.
- * (HZ / 20) == 50 ms and works well for me.
  */
-#define FILTER_TIME (HZ / 20)
+#define FILTER_TIME 60 /* msec */
 
 struct ati_remote {
 	struct input_dev *idev;
@@ -467,7 +466,7 @@
 		/* Filter duplicate events which happen "too close" together. */
 		if ((ati_remote->old_data[0] == data[1]) &&
 			(ati_remote->old_data[1] == data[2]) &&
-			time_before(jiffies, ati_remote->old_jiffies + FILTER_TIME)) {
+			time_before(jiffies, ati_remote->old_jiffies + msecs_to_jiffies(FILTER_TIME))) {
 			ati_remote->repeat_count++;
 		} else {
 			ati_remote->repeat_count = 0;
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index e091d32..a4062a6 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -12,8 +12,13 @@
 *	the single I/O ports of the device.
 *
 *	Supported vendors:	AK Modul-Bus Computer GmbH
-*	Supported devices:	CY7C63001A-PC (to be continued...)
-*	Supported functions:	Read/Write Ports (to be continued...)
+*				(Firmware "Port-Chip")
+*
+*	Supported devices:	CY7C63001A-PC
+*				CY7C63001C-PXC
+*				CY7C63001C-SXC
+*
+*	Supported functions:	Read/Write Ports
 *
 *
 *	This program is free software; you can redistribute it and/or
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index e5e6e4f..bd09232 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -175,6 +175,8 @@
 static void rtl8150_disconnect(struct usb_interface *intf);
 static int rtl8150_probe(struct usb_interface *intf,
 			   const struct usb_device_id *id);
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message);
+static int rtl8150_resume(struct usb_interface *intf);
 
 static const char driver_name [] = "rtl8150";
 
@@ -183,6 +185,8 @@
 	.probe =	rtl8150_probe,
 	.disconnect =	rtl8150_disconnect,
 	.id_table =	rtl8150_table,
+	.suspend =	rtl8150_suspend,
+	.resume =	rtl8150_resume
 };
 
 /*
@@ -238,9 +242,11 @@
 	usb_fill_control_urb(dev->ctrl_urb, dev->udev,
 			 usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr,
 			 &dev->rx_creg, size, ctrl_callback, dev);
-	if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC)))
+	if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) {
+		if (ret == -ENODEV)
+			netif_device_detach(dev->netdev);
 		err("control request submission failed: %d", ret);
-	else
+	} else
 		set_bit(RX_REG_SET, &dev->flags);
 
 	return ret;
@@ -416,6 +422,7 @@
 	struct sk_buff *skb;
 	struct net_device *netdev;
 	u16 rx_stat;
+	int status;
 
 	dev = urb->context;
 	if (!dev)
@@ -465,7 +472,10 @@
 goon:
 	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
 		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
-	if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) {
+	status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+	if (status == -ENODEV)
+		netif_device_detach(dev->netdev);
+	else if (status) {
 		set_bit(RX_URB_FAIL, &dev->flags);
 		goto resched;
 	} else {
@@ -481,6 +491,7 @@
 {
 	rtl8150_t *dev;
 	struct sk_buff *skb;
+	int status;
 
 	dev = (rtl8150_t *)data;
 
@@ -499,10 +510,13 @@
 	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
 		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
 try_again:
-	if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) {
+	status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+	if (status == -ENODEV) {
+		netif_device_detach(dev->netdev);
+	} else if (status) {
 		set_bit(RX_URB_FAIL, &dev->flags);
 		goto tlsched;
-	 } else {
+	} else {
 		clear_bit(RX_URB_FAIL, &dev->flags);
 	}
 
@@ -574,12 +588,43 @@
 
 resubmit:
 	status = usb_submit_urb (urb, SLAB_ATOMIC);
-	if (status)
+	if (status == -ENODEV)
+		netif_device_detach(dev->netdev);
+	else if (status)
 		err ("can't resubmit intr, %s-%s/input0, status %d",
 				dev->udev->bus->bus_name,
 				dev->udev->devpath, status);
 }
 
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	rtl8150_t *dev = usb_get_intfdata(intf);
+
+	netif_device_detach(dev->netdev);
+
+	if (netif_running(dev->netdev)) {
+		usb_kill_urb(dev->rx_urb);
+		usb_kill_urb(dev->intr_urb);
+	}
+	return 0;
+}
+
+static int rtl8150_resume(struct usb_interface *intf)
+{
+	rtl8150_t *dev = usb_get_intfdata(intf);
+
+	netif_device_attach(dev->netdev);
+	if (netif_running(dev->netdev)) {
+		dev->rx_urb->status = 0;
+		dev->rx_urb->actual_length = 0;
+		read_bulk_callback(dev->rx_urb, NULL);
+
+		dev->intr_urb->status = 0;
+		dev->intr_urb->actual_length = 0;
+		intr_callback(dev->intr_urb, NULL);
+	}
+	return 0;
+}
 
 /*
 **
@@ -690,9 +735,14 @@
 	usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2),
 		      skb->data, count, write_bulk_callback, dev);
 	if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
-		warn("failed tx_urb %d\n", res);
-		dev->stats.tx_errors++;
-		netif_start_queue(netdev);
+		/* Can we get/handle EPIPE here? */
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
+		else {
+			warn("failed tx_urb %d\n", res);
+			dev->stats.tx_errors++;
+			netif_start_queue(netdev);
+		}
 	} else {
 		dev->stats.tx_packets++;
 		dev->stats.tx_bytes += skb->len;
@@ -729,16 +779,25 @@
 	
 	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
 		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
-	if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL)))
+	if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
 		warn("%s: rx_urb submit failed: %d", __FUNCTION__, res);
+		return res;
+	}
 	usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3),
 		     dev->intr_buff, INTBUFSIZE, intr_callback,
 		     dev, dev->intr_interval);
-	if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL)))
+	if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
 		warn("%s: intr_urb submit failed: %d", __FUNCTION__, res);
-	netif_start_queue(netdev);
+		usb_kill_urb(dev->rx_urb);
+		return res;
+	}
 	enable_net_traffic(dev);
 	set_carrier(netdev);
+	netif_start_queue(netdev);
 
 	return res;
 }
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index ac33bd4..f5b9438 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -62,15 +62,6 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called airprime.
 
-config USB_SERIAL_ANYDATA
-	tristate "USB AnyData CDMA Wireless Driver"
-	depends on USB_SERIAL
-	help
-	  Say Y here if you want to use a AnyData CDMA device.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called anydata.
-
 config USB_SERIAL_ARK3116
 	tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL
@@ -502,15 +493,18 @@
 	  module will be called keyspan_pda.
 
 config USB_SERIAL_OPTION
-	tristate "USB driver for GSM modems"
+	tristate "USB driver for GSM and CDMA modems"
 	depends on USB_SERIAL
 	help
-	  Say Y here if you have an "Option" GSM PCMCIA card
-	  (or an OEM version: branded Huawei, Audiovox, or Novatel).
+	  Say Y here if you have a GSM or CDMA modem that's connected to USB.
 
-	  These cards feature a built-in OHCI-USB adapter and an
-	  internally-connected GSM modem. The USB bus is not
-	  accessible externally.
+	  This driver also supports several PCMCIA cards which have a
+	  built-in OHCI-USB adapter and an internally-connected GSM modem.
+	  The USB bus on these cards is not accessible externally.
+
+	  Supported devices include (some of?) those made by:
+	  Option, Huawei, Audiovox, Sierra Wireless, Novatel Wireless, or
+	  Anydata.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called option.
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 35d4acc..8efed2c 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -12,7 +12,6 @@
 usbserial-objs	:= usb-serial.o generic.o bus.o $(usbserial-obj-y)
 
 obj-$(CONFIG_USB_SERIAL_AIRPRIME)		+= airprime.o
-obj-$(CONFIG_USB_SERIAL_ANYDATA)		+= anydata.o
 obj-$(CONFIG_USB_SERIAL_ARK3116)		+= ark3116.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)			+= belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CP2101)			+= cp2101.o
diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c
deleted file mode 100644
index 01843ef..0000000
--- a/drivers/usb/serial/anydata.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * AnyData CDMA Serial USB driver
- *
- * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-static struct usb_device_id id_table [] = {
-	{ USB_DEVICE(0x16d5, 0x6501) },	/* AirData CDMA device */
-	{ },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-/* if overridden by the user, then use their value for the size of the
- * read and write urbs */
-static int buffer_size;
-static int debug;
-
-static struct usb_driver anydata_driver = {
-	.name =		"anydata",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-	.no_dynamic_id = 	1,
-};
-
-static int anydata_open(struct usb_serial_port *port, struct file *filp)
-{
-	char *buffer;
-	int result = 0;
-
-	dbg("%s - port %d", __FUNCTION__, port->number);
-
-	if (buffer_size) {
-		/* override the default buffer sizes */
-		buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!buffer) {
-			dev_err(&port->dev, "%s - out of memory.\n",
-				__FUNCTION__);
-			return -ENOMEM;
-		}
-		kfree (port->read_urb->transfer_buffer);
-		port->read_urb->transfer_buffer = buffer;
-		port->read_urb->transfer_buffer_length = buffer_size;
-
-		buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!buffer) {
-			dev_err(&port->dev, "%s - out of memory.\n",
-				__FUNCTION__);
-			return -ENOMEM;
-		}
-		kfree (port->write_urb->transfer_buffer);
-		port->write_urb->transfer_buffer = buffer;
-		port->write_urb->transfer_buffer_length = buffer_size;
-		port->bulk_out_size = buffer_size;
-	}
-
-	/* Start reading from the device */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			  usb_rcvbulkpipe(port->serial->dev,
-				  	  port->bulk_in_endpointAddress),
-			  port->read_urb->transfer_buffer,
-			  port->read_urb->transfer_buffer_length,
-			  usb_serial_generic_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__FUNCTION__, result);
-
-	return result;
-}
-
-static struct usb_serial_driver anydata_device = {
-	.driver = {
-		.owner =	THIS_MODULE,
-		.name =		"anydata",
-	},
-	.id_table =		id_table,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
-	.num_ports =		1,
-	.open =			anydata_open,
-};
-
-static int __init anydata_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&anydata_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&anydata_driver);
-	if (retval)
-		usb_serial_deregister(&anydata_device);
-	return retval;
-}
-
-static void __exit anydata_exit(void)
-{
-	usb_deregister(&anydata_driver);
-	usb_serial_deregister(&anydata_device);
-}
-
-module_init(anydata_init);
-module_exit(anydata_exit);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
-module_param(buffer_size, int, 0);
-MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers");
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b458aed..a20da85 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -337,6 +337,7 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 04ef90f..9f7343a 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -182,6 +182,10 @@
 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
 #define FTDI_USB_UIRT_PID	0xF850	/* Product Id */
 
+/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
+
+#define FTDI_TNC_X_PID		0xEBE0
+
 /*
  * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
  * All of these devices use FTDI's vendor ID (0x0403).
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 59c5d99..7e1bd5d 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -250,6 +250,7 @@
 	{ USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */
 	{ USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
 	{ USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
+	{ USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */
 	{ USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
 	{ USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
 	{ USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f0530c1..c856e6f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -9,40 +9,14 @@
 
   Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 
-  History:
-
-  2005-05-19  v0.1   Initial version, based on incomplete docs
-                     and analysis of misbehavior with the standard driver
-  2005-05-20  v0.2   Extended the input buffer to avoid losing
-                     random 64-byte chunks of data
-  2005-05-21  v0.3   implemented chars_in_buffer()
-                     turned on low_latency
-                     simplified the code somewhat
-  2005-05-24  v0.4   option_write() sometimes deadlocked under heavy load
-                     removed some dead code
-                     added sponsor notice
-                     coding style clean-up
-  2005-06-20  v0.4.1 add missing braces :-/
-                     killed end-of-line whitespace
-  2005-07-15  v0.4.2 rename WLAN product to FUSION, add FUSION2
-  2005-09-10  v0.4.3 added HUAWEI E600 card and Audiovox AirCard
-  2005-09-20  v0.4.4 increased recv buffer size: the card sometimes
-                     wants to send >2000 bytes.
-  2006-04-10  v0.5   fixed two array overrun errors :-/
-  2006-04-21  v0.5.1 added support for Sierra Wireless MC8755
-  2006-05-15  v0.6   re-enable multi-port support
-  2006-06-01  v0.6.1 add COBRA
-  2006-06-01  v0.6.2 add backwards-compatibility stuff
-  2006-06-01  v0.6.3 add Novatel Wireless
-  2006-06-01  v0.7   Option => GSM
-  2006-06-01  v0.7.1 add COBRA2
+  History: see the git log.
 
   Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
 
   This driver exists because the "normal" serial driver doesn't work too well
   with GSM modems. Issues:
   - data loss -- one single Receive URB is not nearly enough
-  - nonstandard flow (Option devices) and multiplex (Sierra) control
+  - nonstandard flow (Option devices) control
   - controlling the baud rate doesn't make sense
 
   This driver is named "option" because the most common device it's
@@ -96,8 +70,8 @@
 #define OPTION_VENDOR_ID                0x0AF0
 #define HUAWEI_VENDOR_ID                0x12D1
 #define AUDIOVOX_VENDOR_ID              0x0F3D
-#define SIERRAWIRELESS_VENDOR_ID        0x1199
 #define NOVATELWIRELESS_VENDOR_ID       0x1410
+#define ANYDATA_VENDOR_ID               0x16d5
 
 #define OPTION_PRODUCT_OLD              0x5000
 #define OPTION_PRODUCT_FUSION           0x6000
@@ -106,8 +80,8 @@
 #define OPTION_PRODUCT_COBRA2           0x6600
 #define HUAWEI_PRODUCT_E600             0x1001
 #define AUDIOVOX_PRODUCT_AIRCARD        0x0112
-#define SIERRAWIRELESS_PRODUCT_MC8755   0x6802
 #define NOVATELWIRELESS_PRODUCT_U740    0x1400
+#define ANYDATA_PRODUCT_ID              0x6501
 
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
@@ -117,8 +91,8 @@
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
-	{ USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
+	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
 	{ } /* Terminating entry */
 };
 
@@ -131,10 +105,7 @@
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
-	{ } /* Terminating entry */
-};
-static struct usb_device_id option_ids3[] = {
-	{ USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
+	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
 	{ } /* Terminating entry */
 };
 
@@ -151,37 +122,11 @@
 /* The card has three separate interfaces, which the serial driver
  * recognizes separately, thus num_port=1.
  */
-static struct usb_serial_driver option_3port_device = {
-	.driver = {
-		.owner =	THIS_MODULE,
-		.name =		"option",
-	},
-	.description       = "GSM modem (3-port)",
-	.id_table          = option_ids3,
-	.num_interrupt_in  = NUM_DONT_CARE,
-	.num_bulk_in       = NUM_DONT_CARE,
-	.num_bulk_out      = NUM_DONT_CARE,
-	.num_ports         = 3,
-	.open              = option_open,
-	.close             = option_close,
-	.write             = option_write,
-	.write_room        = option_write_room,
-	.chars_in_buffer   = option_chars_in_buffer,
-	.throttle          = option_rx_throttle,
-	.unthrottle        = option_rx_unthrottle,
-	.set_termios       = option_set_termios,
-	.break_ctl         = option_break_ctl,
-	.tiocmget          = option_tiocmget,
-	.tiocmset          = option_tiocmset,
-	.attach            = option_startup,
-	.shutdown          = option_shutdown,
-	.read_int_callback = option_instat_callback,
-};
 
 static struct usb_serial_driver option_1port_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
-		.name =		"option",
+		.name =		"option1",
 	},
 	.description       = "GSM modem (1-port)",
 	.id_table          = option_ids1,
@@ -245,9 +190,6 @@
 	retval = usb_serial_register(&option_1port_device);
 	if (retval)
 		goto failed_1port_device_register;
-	retval = usb_serial_register(&option_3port_device);
-	if (retval)
-		goto failed_3port_device_register;
 	retval = usb_register(&option_driver);
 	if (retval)
 		goto failed_driver_register;
@@ -257,8 +199,6 @@
 	return 0;
 
 failed_driver_register:
-	usb_serial_deregister (&option_3port_device);
-failed_3port_device_register:
 	usb_serial_deregister (&option_1port_device);
 failed_1port_device_register:
 	return retval;
@@ -267,7 +207,6 @@
 static void __exit option_exit(void)
 {
 	usb_deregister (&option_driver);
-	usb_serial_deregister (&option_3port_device);
 	usb_serial_deregister (&option_1port_device);
 }
 
@@ -656,7 +595,6 @@
 
 	dbg("%s", __FUNCTION__);
 
-
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
 		portdata = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 259db31..efbbc0a 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -81,6 +81,7 @@
 	{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
 	{ USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) },
 	{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
+	{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index d9c1e6e..a692ac6 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -89,3 +89,7 @@
 /* DATAPILOT Universal-2 Phone Cable */
 #define DATAPILOT_U2_VENDOR_ID	0x0731
 #define DATAPILOT_U2_PRODUCT_ID	0x2003
+
+/* Belkin "F5U257" Serial Adapter */
+#define BELKIN_VENDOR_ID	0x050d
+#define BELKIN_PRODUCT_ID	0x0257
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index a5ca449..2793f9a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -145,6 +145,13 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Mario Rettig <mariorettig@web.de> */
+UNUSUAL_DEV(  0x0421, 0x042e, 0x0100, 0x0100,
+		"Nokia",
+		"Nokia 3250",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
 /* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
  * Einar Th. Einarsson <einarthered@gmail.com> */
 UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
@@ -627,18 +634,6 @@
 		"Digital Camera EX-20 DSC",
 		US_SC_8070, US_PR_DEVICE, NULL, 0 ),
 
-/* The entry was here before I took over, and had US_SC_RBC. It turns
- * out that isn't needed. Additionally, Torsten Eriksson
- * <Torsten.Eriksson@bergianska.se> is able to use his device fine
- * without this entry at all - but I don't suspect that will be true
- * for all users (the protocol is likely needed), so is staying at
- * this time. - Phil Dibowitz <phil@ipom.com>
- */
-UNUSUAL_DEV(  0x059f, 0xa601, 0x0200, 0x0200, 
-		"LaCie",
-		"USB Hard Disk",
-		US_SC_DEVICE, US_PR_CB, NULL, 0 ),
-
 /* Submitted by Joel Bourquard <numlock@freesurf.ch>
  * Some versions of this device need the SubClass and Protocol overrides
  * while others don't.
@@ -1106,7 +1101,15 @@
                 "Optio S/S4",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_INQUIRY ),
-		
+
+/* This is a virtual windows driver CD, which the zd1211rw driver automatically
+ * converts into a WLAN device. */
+UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
+                "ZyXEL",
+                "G-220F USB-WLAN Install",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_DEVICE ),
+
 #ifdef CONFIG_USB_STORAGE_ISD200
 UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
 		"ATI",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 5ee19be..8d7bdcb 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -483,7 +483,7 @@
 }
 
 /* Get the unusual_devs entries and the string descriptors */
-static void get_device_info(struct us_data *us, const struct usb_device_id *id)
+static int get_device_info(struct us_data *us, const struct usb_device_id *id)
 {
 	struct usb_device *dev = us->pusb_dev;
 	struct usb_interface_descriptor *idesc =
@@ -500,6 +500,11 @@
 			unusual_dev->useTransport;
 	us->flags = USB_US_ORIG_FLAGS(id->driver_info);
 
+	if (us->flags & US_FL_IGNORE_DEVICE) {
+		printk(KERN_INFO USB_STORAGE "device ignored\n");
+		return -ENODEV;
+	}
+
 	/*
 	 * This flag is only needed when we're in high-speed, so let's
 	 * disable it if we're in full-speed
@@ -541,6 +546,8 @@
 				msgs[msg],
 				UTS_RELEASE);
 	}
+
+	return 0;
 }
 
 /* Get the transport settings */
@@ -969,7 +976,9 @@
 	 * of the match from the usb_device_id table, so we can find the
 	 * corresponding entry in the private table.
 	 */
-	get_device_info(us, id);
+	result = get_device_info(us, id);
+	if (result)
+		goto BadDevice;
 
 	/* Get the transport, protocol, and pipe settings */
 	result = get_transport(us);
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index 3c4eb9f..f83003f 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -48,8 +48,6 @@
 };
 
 extern unsigned int mpurate;
-extern struct list_head clocks;
-extern spinlock_t clockfw_lock;
 
 extern int clk_init(struct clk_functions * custom_clocks);
 extern int clk_register(struct clk *clk);
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c944e8f..d2bd0c8 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -103,8 +103,7 @@
  * @condition: binding state of the interface: not bound, binding
  *	(in probe()), bound to a driver, or unbinding (in disconnect())
  * @dev: driver model's view of this device
- * @usb_dev: if an interface is bound to the USB major, this will point
- *	to the sysfs representation for that device.
+ * @class_dev: driver model's class view of this device.
  *
  * USB device drivers attach to interfaces on a physical device.  Each
  * interface encapsulates a single high level function, such as feeding
@@ -144,7 +143,7 @@
 					 * bound to */
 	enum usb_interface_condition condition;		/* state of binding */
 	struct device dev;		/* interface specific device info */
-	struct device *usb_dev;		/* pointer to the usb class's device, if any */
+	struct class_device *class_dev;
 };
 #define	to_usb_interface(d) container_of(d, struct usb_interface, dev)
 #define	interface_to_usbdev(intf) \
@@ -361,7 +360,7 @@
 	char *serial;			/* iSerialNumber string, if present */
 
 	struct list_head filelist;
-	struct device *usbfs_dev;
+	struct class_device *class_dev;
 	struct dentry *usbfs_dentry;	/* usbfs dentry entry for the device */
 
 	/*
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index f38f43f..e7fc5fe 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -44,7 +44,9 @@
 	US_FLAG(NO_WP_DETECT,	0x00000200)			\
 		/* Don't check for write-protect */		\
 	US_FLAG(MAX_SECTORS_64,	0x00000400)			\
-		/* Sets max_sectors to 64    */
+		/* Sets max_sectors to 64    */			\
+	US_FLAG(IGNORE_DEVICE,	0x00000800)			\
+		/* Don't claim device */
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };
diff --git a/kernel/signal.c b/kernel/signal.c
index 7fe874d..bfdb568 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -791,22 +791,31 @@
 /*
  * Force a signal that the process can't ignore: if necessary
  * we unblock the signal and change any SIG_IGN to SIG_DFL.
+ *
+ * Note: If we unblock the signal, we always reset it to SIG_DFL,
+ * since we do not want to have a signal handler that was blocked
+ * be invoked when user space had explicitly blocked it.
+ *
+ * We don't want to have recursive SIGSEGV's etc, for example.
  */
-
 int
 force_sig_info(int sig, struct siginfo *info, struct task_struct *t)
 {
 	unsigned long int flags;
-	int ret;
+	int ret, blocked, ignored;
+	struct k_sigaction *action;
 
 	spin_lock_irqsave(&t->sighand->siglock, flags);
-	if (t->sighand->action[sig-1].sa.sa_handler == SIG_IGN) {
-		t->sighand->action[sig-1].sa.sa_handler = SIG_DFL;
+	action = &t->sighand->action[sig-1];
+	ignored = action->sa.sa_handler == SIG_IGN;
+	blocked = sigismember(&t->blocked, sig);
+	if (blocked || ignored) {
+		action->sa.sa_handler = SIG_DFL;
+		if (blocked) {
+			sigdelset(&t->blocked, sig);
+			recalc_sigpending_tsk(t);
+		}
 	}
-	if (sigismember(&t->blocked, sig)) {
-		sigdelset(&t->blocked, sig);
-	}
-	recalc_sigpending_tsk(t);
 	ret = specific_send_sig_info(sig, info, t);
 	spin_unlock_irqrestore(&t->sighand->siglock, flags);
 
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index f011322..bb19c15 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -77,8 +77,7 @@
 
 # cc-version
 # Usage gcc-ver := $(call cc-version, $(CC))
-cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \
-              $(if $(1), $(1), $(CC)))
+cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC))
 
 # cc-ifversion
 # Usage:  EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index a495502..0a64688 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -40,7 +40,7 @@
 include scripts/Makefile.lib
 
 kernelsymfile := $(objtree)/Module.symvers
-modulesymfile := $(KBUILD_EXTMOD)/Modules.symvers
+modulesymfile := $(KBUILD_EXTMOD)/Module.symvers
 
 # Step 1), find all modules listed in $(MODVERDIR)/
 __modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod)))
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index 2ee48c3..a69d8ac 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -357,7 +357,7 @@
 		for (e = prop->expr; e; e = e->left.expr)
 			if (e->right.sym->visible != no)
 				flags &= e->right.sym->flags;
-		sym->flags |= flags & SYMBOL_DEF_USER;
+		sym->flags &= flags | ~SYMBOL_DEF_USER;
 	}
 
 	sym_change_count += conf_warnings || conf_unsaved;
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 37f67c2..4431292 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -52,6 +52,23 @@
                 sprintf(str + strlen(str), "*");                \
 } while(0)
 
+/**
+ * Check that sizeof(device_id type) are consistent with size of section
+ * in .o file. If in-consistent then userspace and kernel does not agree
+ * on actual size which is a bug.
+ **/
+static void device_id_size_check(const char *modname, const char *device_id,
+				 unsigned long size, unsigned long id_size)
+{
+	if (size % id_size || size < id_size) {
+		fatal("%s: sizeof(struct %s_device_id)=%lu is not a modulo "
+		      "of the size of section __mod_%s_device_table=%lu.\n"
+		      "Fix definition of struct %s_device_id "
+		      "in mod_devicetable.h\n",
+		      modname, device_id, id_size, device_id, size, device_id);
+	}
+}
+
 /* USB is special because the bcdDevice can be matched against a numeric range */
 /* Looks like "usb:vNpNdNdcNdscNdpNicNiscNipN" */
 static void do_usb_entry(struct usb_device_id *id,
@@ -152,10 +169,8 @@
 	unsigned int i;
 	const unsigned long id_size = sizeof(struct usb_device_id);
 
-	if (size % id_size || size < id_size) {
-		warn("%s ids %lu bad size "
-		     "(each on %lu)\n", mod->name, size, id_size);
-	}
+	device_id_size_check(mod->name, "usb", size, id_size);
+
 	/* Leave last one: it's the terminator. */
 	size -= id_size;
 
@@ -434,6 +449,7 @@
 
 static void do_table(void *symval, unsigned long size,
 		     unsigned long id_size,
+		     const char *device_id,
 		     void *function,
 		     struct module *mod)
 {
@@ -441,10 +457,7 @@
 	char alias[500];
 	int (*do_entry)(const char *, void *entry, char *alias) = function;
 
-	if (size % id_size || size < id_size) {
-		warn("%s ids %lu bad size "
-		     "(each on %lu)\n", mod->name, size, id_size);
-	}
+	device_id_size_check(mod->name, device_id, size, id_size);
 	/* Leave last one: it's the terminator. */
 	size -= id_size;
 
@@ -476,40 +489,51 @@
 		+ sym->st_value;
 
 	if (sym_is(symname, "__mod_pci_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct pci_device_id),
+		do_table(symval, sym->st_size,
+			 sizeof(struct pci_device_id), "pci",
 			 do_pci_entry, mod);
 	else if (sym_is(symname, "__mod_usb_device_table"))
 		/* special case to handle bcdDevice ranges */
 		do_usb_table(symval, sym->st_size, mod);
 	else if (sym_is(symname, "__mod_ieee1394_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct ieee1394_device_id),
+		do_table(symval, sym->st_size,
+			 sizeof(struct ieee1394_device_id), "ieee1394",
 			 do_ieee1394_entry, mod);
 	else if (sym_is(symname, "__mod_ccw_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct ccw_device_id),
+		do_table(symval, sym->st_size,
+			 sizeof(struct ccw_device_id), "ccw",
 			 do_ccw_entry, mod);
 	else if (sym_is(symname, "__mod_serio_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct serio_device_id),
+		do_table(symval, sym->st_size,
+			 sizeof(struct serio_device_id), "serio",
 			 do_serio_entry, mod);
 	else if (sym_is(symname, "__mod_pnp_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct pnp_device_id),
+		do_table(symval, sym->st_size,
+			 sizeof(struct pnp_device_id), "pnp",
 			 do_pnp_entry, mod);
 	else if (sym_is(symname, "__mod_pnp_card_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct pnp_card_device_id),
+		do_table(symval, sym->st_size,
+			 sizeof(struct pnp_card_device_id), "pnp_card",
 			 do_pnp_card_entry, mod);
 	else if (sym_is(symname, "__mod_pcmcia_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct pcmcia_device_id),
+		do_table(symval, sym->st_size,
+			 sizeof(struct pcmcia_device_id), "pcmcia",
 			 do_pcmcia_entry, mod);
         else if (sym_is(symname, "__mod_of_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct of_device_id),
+		do_table(symval, sym->st_size,
+			 sizeof(struct of_device_id), "of",
 			 do_of_entry, mod);
         else if (sym_is(symname, "__mod_vio_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct vio_device_id),
+		do_table(symval, sym->st_size,
+			 sizeof(struct vio_device_id), "vio",
 			 do_vio_entry, mod);
 	else if (sym_is(symname, "__mod_i2c_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct i2c_device_id),
+		do_table(symval, sym->st_size,
+			 sizeof(struct i2c_device_id), "i2c",
 			 do_i2c_entry, mod);
 	else if (sym_is(symname, "__mod_input_device_table"))
-		do_table(symval, sym->st_size, sizeof(struct input_device_id),
+		do_table(symval, sym->st_size,
+			 sizeof(struct input_device_id), "input",
 			 do_input_entry, mod);
 }