| /* |
| * PCI autoconfiguration library |
| * |
| * Author: Matt Porter <mporter@mvista.com> |
| * |
| * Copyright 2000, 2001 MontaVista Software Inc. |
| * Copyright 2001 Bradley D. LaRonde <brad@ltc.com> |
| * Copyright 2003 Paul Mundt <lethal@linux-sh.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /* |
| * Modified for MIPS by Jun Sun, jsun@mvista.com |
| * |
| * . Simplify the interface between pci_auto and the rest: a single function. |
| * . Assign resources from low address to upper address. |
| * . change most int to u32. |
| * |
| * Further modified to include it as mips generic code, ppopov@mvista.com. |
| * |
| * 2001-10-26 Bradley D. LaRonde <brad@ltc.com> |
| * - Add a top_bus argument to the "early config" functions so that |
| * they can set a fake parent bus pointer to convince the underlying |
| * pci ops to use type 1 configuration for sub busses. |
| * - Set bridge base and limit registers correctly. |
| * - Align io and memory base properly before and after bridge setup. |
| * - Don't fall through to pci_setup_bars for bridge. |
| * - Reformat the debug output to look more like lspci's output. |
| * |
| * Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org |
| * |
| * 2003-08-05 Paul Mundt <lethal@linux-sh.org> |
| * - Don't update the BAR values on systems that already have valid addresses |
| * and don't want these updated for whatever reason, by way of a new config |
| * option check. However, we still read in the old BAR values so that they |
| * can still be reported through the debug output. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| |
| #undef DEBUG |
| #ifdef DEBUG |
| #define DBG(x...) printk(x) |
| #else |
| #define DBG(x...) |
| #endif |
| |
| /* |
| * These functions are used early on before PCI scanning is done |
| * and all of the pci_dev and pci_bus structures have been created. |
| */ |
| static struct pci_dev *fake_pci_dev(struct pci_channel *hose, |
| int top_bus, int busnr, int devfn) |
| { |
| static struct pci_dev dev; |
| static struct pci_bus bus; |
| |
| dev.bus = &bus; |
| dev.sysdata = hose; |
| dev.devfn = devfn; |
| bus.number = busnr; |
| bus.ops = hose->pci_ops; |
| |
| if(busnr != top_bus) |
| /* Fake a parent bus structure. */ |
| bus.parent = &bus; |
| else |
| bus.parent = NULL; |
| |
| return &dev; |
| } |
| |
| #define EARLY_PCI_OP(rw, size, type) \ |
| int early_##rw##_config_##size(struct pci_channel *hose, \ |
| int top_bus, int bus, int devfn, int offset, type value) \ |
| { \ |
| return pci_##rw##_config_##size( \ |
| fake_pci_dev(hose, top_bus, bus, devfn), \ |
| offset, value); \ |
| } |
| |
| EARLY_PCI_OP(read, byte, u8 *) |
| EARLY_PCI_OP(read, word, u16 *) |
| EARLY_PCI_OP(read, dword, u32 *) |
| EARLY_PCI_OP(write, byte, u8) |
| EARLY_PCI_OP(write, word, u16) |
| EARLY_PCI_OP(write, dword, u32) |
| |
| static struct resource *io_resource_inuse; |
| static struct resource *mem_resource_inuse; |
| |
| static u32 pciauto_lower_iospc; |
| static u32 pciauto_upper_iospc; |
| |
| static u32 pciauto_lower_memspc; |
| static u32 pciauto_upper_memspc; |
| |
| static void __init |
| pciauto_setup_bars(struct pci_channel *hose, |
| int top_bus, |
| int current_bus, |
| int pci_devfn, |
| int bar_limit) |
| { |
| u32 bar_response, bar_size, bar_value; |
| u32 bar, addr_mask, bar_nr = 0; |
| u32 * upper_limit; |
| u32 * lower_limit; |
| int found_mem64 = 0; |
| |
| for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) { |
| #if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) |
| u32 bar_addr; |
| |
| /* Read the old BAR value */ |
| early_read_config_dword(hose, top_bus, |
| current_bus, |
| pci_devfn, |
| bar, |
| &bar_addr); |
| #endif |
| |
| /* Tickle the BAR and get the response */ |
| early_write_config_dword(hose, top_bus, |
| current_bus, |
| pci_devfn, |
| bar, |
| 0xffffffff); |
| |
| early_read_config_dword(hose, top_bus, |
| current_bus, |
| pci_devfn, |
| bar, |
| &bar_response); |
| |
| #if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) |
| /* |
| * Write the old BAR value back out, only update the BAR |
| * if we implicitly want resources to be updated, which |
| * is done by the generic code further down. -- PFM. |
| */ |
| early_write_config_dword(hose, top_bus, |
| current_bus, |
| pci_devfn, |
| bar, |
| bar_addr); |
| #endif |
| |
| /* If BAR is not implemented go to the next BAR */ |
| if (!bar_response) |
| continue; |
| |
| /* |
| * Workaround for a BAR that doesn't use its upper word, |
| * like the ALi 1535D+ PCI DC-97 Controller Modem (M5457). |
| * bdl <brad@ltc.com> |
| */ |
| if (!(bar_response & 0xffff0000)) |
| bar_response |= 0xffff0000; |
| |
| retry: |
| /* Check the BAR type and set our address mask */ |
| if (bar_response & PCI_BASE_ADDRESS_SPACE) { |
| addr_mask = PCI_BASE_ADDRESS_IO_MASK; |
| upper_limit = &pciauto_upper_iospc; |
| lower_limit = &pciauto_lower_iospc; |
| DBG(" I/O"); |
| } else { |
| if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == |
| PCI_BASE_ADDRESS_MEM_TYPE_64) |
| found_mem64 = 1; |
| |
| addr_mask = PCI_BASE_ADDRESS_MEM_MASK; |
| upper_limit = &pciauto_upper_memspc; |
| lower_limit = &pciauto_lower_memspc; |
| DBG(" Mem"); |
| } |
| |
| |
| /* Calculate requested size */ |
| bar_size = ~(bar_response & addr_mask) + 1; |
| |
| /* Allocate a base address */ |
| bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size; |
| |
| if ((bar_value + bar_size) > *upper_limit) { |
| if (bar_response & PCI_BASE_ADDRESS_SPACE) { |
| if (io_resource_inuse->child) { |
| io_resource_inuse = |
| io_resource_inuse->child; |
| pciauto_lower_iospc = |
| io_resource_inuse->start; |
| pciauto_upper_iospc = |
| io_resource_inuse->end + 1; |
| goto retry; |
| } |
| |
| } else { |
| if (mem_resource_inuse->child) { |
| mem_resource_inuse = |
| mem_resource_inuse->child; |
| pciauto_lower_memspc = |
| mem_resource_inuse->start; |
| pciauto_upper_memspc = |
| mem_resource_inuse->end + 1; |
| goto retry; |
| } |
| } |
| DBG(" unavailable -- skipping, value %x size %x\n", |
| bar_value, bar_size); |
| continue; |
| } |
| |
| #ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES |
| /* Write it out and update our limit */ |
| early_write_config_dword(hose, top_bus, current_bus, pci_devfn, |
| bar, bar_value); |
| #endif |
| |
| *lower_limit = bar_value + bar_size; |
| |
| /* |
| * If we are a 64-bit decoder then increment to the |
| * upper 32 bits of the bar and force it to locate |
| * in the lower 4GB of memory. |
| */ |
| if (found_mem64) { |
| bar += 4; |
| early_write_config_dword(hose, top_bus, |
| current_bus, |
| pci_devfn, |
| bar, |
| 0x00000000); |
| } |
| |
| DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size); |
| |
| bar_nr++; |
| } |
| |
| } |
| |
| static void __init |
| pciauto_prescan_setup_bridge(struct pci_channel *hose, |
| int top_bus, |
| int current_bus, |
| int pci_devfn, |
| int sub_bus) |
| { |
| /* Configure bus number registers */ |
| early_write_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_PRIMARY_BUS, current_bus); |
| early_write_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_SECONDARY_BUS, sub_bus + 1); |
| early_write_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_SUBORDINATE_BUS, 0xff); |
| |
| /* Align memory and I/O to 1MB and 4KB boundaries. */ |
| pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1)) |
| & ~(0x100000 - 1); |
| pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1)) |
| & ~(0x1000 - 1); |
| |
| /* Set base (lower limit) of address range behind bridge. */ |
| early_write_config_word(hose, top_bus, current_bus, pci_devfn, |
| PCI_MEMORY_BASE, pciauto_lower_memspc >> 16); |
| early_write_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8); |
| early_write_config_word(hose, top_bus, current_bus, pci_devfn, |
| PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16); |
| |
| /* We don't support prefetchable memory for now, so disable */ |
| early_write_config_word(hose, top_bus, current_bus, pci_devfn, |
| PCI_PREF_MEMORY_BASE, 0); |
| early_write_config_word(hose, top_bus, current_bus, pci_devfn, |
| PCI_PREF_MEMORY_LIMIT, 0); |
| } |
| |
| static void __init |
| pciauto_postscan_setup_bridge(struct pci_channel *hose, |
| int top_bus, |
| int current_bus, |
| int pci_devfn, |
| int sub_bus) |
| { |
| u32 temp; |
| |
| /* |
| * [jsun] we always bump up baselines a little, so that if there |
| * nothing behind P2P bridge, we don't wind up overlapping IO/MEM |
| * spaces. |
| */ |
| pciauto_lower_memspc += 1; |
| pciauto_lower_iospc += 1; |
| |
| /* Configure bus number registers */ |
| early_write_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_SUBORDINATE_BUS, sub_bus); |
| |
| /* Set upper limit of address range behind bridge. */ |
| early_write_config_word(hose, top_bus, current_bus, pci_devfn, |
| PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16); |
| early_write_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8); |
| early_write_config_word(hose, top_bus, current_bus, pci_devfn, |
| PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16); |
| |
| /* Align memory and I/O to 1MB and 4KB boundaries. */ |
| pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1)) |
| & ~(0x100000 - 1); |
| pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1)) |
| & ~(0x1000 - 1); |
| |
| /* Enable memory and I/O accesses, enable bus master */ |
| early_read_config_dword(hose, top_bus, current_bus, pci_devfn, |
| PCI_COMMAND, &temp); |
| early_write_config_dword(hose, top_bus, current_bus, pci_devfn, |
| PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
| | PCI_COMMAND_MASTER); |
| } |
| |
| static void __init |
| pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose, |
| int top_bus, |
| int current_bus, |
| int pci_devfn, |
| int sub_bus) |
| { |
| /* Configure bus number registers */ |
| early_write_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_PRIMARY_BUS, current_bus); |
| early_write_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_SECONDARY_BUS, sub_bus + 1); |
| early_write_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_SUBORDINATE_BUS, 0xff); |
| |
| /* Align memory and I/O to 4KB and 4 byte boundaries. */ |
| pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) |
| & ~(0x1000 - 1); |
| pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1)) |
| & ~(0x4 - 1); |
| |
| early_write_config_dword(hose, top_bus, current_bus, pci_devfn, |
| PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc); |
| early_write_config_dword(hose, top_bus, current_bus, pci_devfn, |
| PCI_CB_IO_BASE_0, pciauto_lower_iospc); |
| } |
| |
| static void __init |
| pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose, |
| int top_bus, |
| int current_bus, |
| int pci_devfn, |
| int sub_bus) |
| { |
| u32 temp; |
| |
| #if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) |
| /* |
| * [jsun] we always bump up baselines a little, so that if there |
| * nothing behind P2P bridge, we don't wind up overlapping IO/MEM |
| * spaces. |
| */ |
| pciauto_lower_memspc += 1; |
| pciauto_lower_iospc += 1; |
| #endif |
| |
| /* |
| * Configure subordinate bus number. The PCI subsystem |
| * bus scan will renumber buses (reserving three additional |
| * for this PCI<->CardBus bridge for the case where a CardBus |
| * adapter contains a P2P or CB2CB bridge. |
| */ |
| |
| early_write_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_SUBORDINATE_BUS, sub_bus); |
| |
| /* |
| * Reserve an additional 4MB for mem space and 16KB for |
| * I/O space. This should cover any additional space |
| * requirement of unusual CardBus devices with |
| * additional bridges that can consume more address space. |
| * |
| * Although pcmcia-cs currently will reprogram bridge |
| * windows, the goal is to add an option to leave them |
| * alone and use the bridge window ranges as the regions |
| * that are searched for free resources upon hot-insertion |
| * of a device. This will allow a PCI<->CardBus bridge |
| * configured by this routine to happily live behind a |
| * P2P bridge in a system. |
| */ |
| #if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D) |
| pciauto_lower_memspc += 0x00400000; |
| pciauto_lower_iospc += 0x00004000; |
| #endif |
| |
| /* Align memory and I/O to 4KB and 4 byte boundaries. */ |
| pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) |
| & ~(0x1000 - 1); |
| pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1)) |
| & ~(0x4 - 1); |
| /* Set up memory and I/O filter limits, assume 32-bit I/O space */ |
| early_write_config_dword(hose, top_bus, current_bus, pci_devfn, |
| PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1); |
| early_write_config_dword(hose, top_bus, current_bus, pci_devfn, |
| PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1); |
| |
| /* Enable memory and I/O accesses, enable bus master */ |
| early_read_config_dword(hose, top_bus, current_bus, pci_devfn, |
| PCI_COMMAND, &temp); |
| early_write_config_dword(hose, top_bus, current_bus, pci_devfn, |
| PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | |
| PCI_COMMAND_MASTER); |
| } |
| |
| #define PCIAUTO_IDE_MODE_MASK 0x05 |
| |
| static int __init |
| pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) |
| { |
| int sub_bus; |
| u32 pci_devfn, pci_class, cmdstat, found_multi=0; |
| unsigned short vid, did; |
| unsigned char header_type; |
| int devfn_start = 0; |
| int devfn_stop = 0xff; |
| |
| sub_bus = current_bus; |
| |
| if (hose->first_devfn) |
| devfn_start = hose->first_devfn; |
| if (hose->last_devfn) |
| devfn_stop = hose->last_devfn; |
| |
| for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) { |
| |
| if (PCI_FUNC(pci_devfn) && !found_multi) |
| continue; |
| |
| early_read_config_word(hose, top_bus, current_bus, pci_devfn, |
| PCI_VENDOR_ID, &vid); |
| |
| if (vid == 0xffff) continue; |
| |
| early_read_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_HEADER_TYPE, &header_type); |
| |
| if (!PCI_FUNC(pci_devfn)) |
| found_multi = header_type & 0x80; |
| |
| early_read_config_word(hose, top_bus, current_bus, pci_devfn, |
| PCI_DEVICE_ID, &did); |
| |
| early_read_config_dword(hose, top_bus, current_bus, pci_devfn, |
| PCI_CLASS_REVISION, &pci_class); |
| |
| DBG("%.2x:%.2x.%x Class %.4x: %.4x:%.4x", |
| current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn), |
| pci_class >> 16, vid, did); |
| if (pci_class & 0xff) |
| DBG(" (rev %.2x)", pci_class & 0xff); |
| DBG("\n"); |
| |
| if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) { |
| DBG(" Bridge: primary=%.2x, secondary=%.2x\n", |
| current_bus, sub_bus + 1); |
| #if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D) |
| pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_1); |
| #endif |
| pciauto_prescan_setup_bridge(hose, top_bus, current_bus, |
| pci_devfn, sub_bus); |
| DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", |
| sub_bus + 1, |
| pciauto_lower_iospc, pciauto_lower_memspc); |
| sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1); |
| DBG("Back to bus %.2x\n", current_bus); |
| pciauto_postscan_setup_bridge(hose, top_bus, current_bus, |
| pci_devfn, sub_bus); |
| continue; |
| } else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) { |
| DBG(" CARDBUS Bridge: primary=%.2x, secondary=%.2x\n", |
| current_bus, sub_bus + 1); |
| DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn)); |
| /* Place CardBus Socket/ExCA registers */ |
| pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0); |
| |
| pciauto_prescan_setup_cardbus_bridge(hose, top_bus, |
| current_bus, pci_devfn, sub_bus); |
| |
| DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", |
| sub_bus + 1, |
| pciauto_lower_iospc, pciauto_lower_memspc); |
| sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1); |
| DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus); |
| pciauto_postscan_setup_cardbus_bridge(hose, top_bus, |
| current_bus, pci_devfn, sub_bus); |
| continue; |
| } else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) { |
| |
| unsigned char prg_iface; |
| |
| early_read_config_byte(hose, top_bus, current_bus, |
| pci_devfn, PCI_CLASS_PROG, &prg_iface); |
| if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) { |
| DBG("Skipping legacy mode IDE controller\n"); |
| continue; |
| } |
| } |
| |
| /* |
| * Found a peripheral, enable some standard |
| * settings |
| */ |
| early_read_config_dword(hose, top_bus, current_bus, pci_devfn, |
| PCI_COMMAND, &cmdstat); |
| early_write_config_dword(hose, top_bus, current_bus, pci_devfn, |
| PCI_COMMAND, cmdstat | PCI_COMMAND_IO | |
| PCI_COMMAND_MEMORY | |
| PCI_COMMAND_MASTER); |
| #if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) |
| early_write_config_byte(hose, top_bus, current_bus, pci_devfn, |
| PCI_LATENCY_TIMER, 0x80); |
| #endif |
| |
| /* Allocate PCI I/O and/or memory space */ |
| pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5); |
| } |
| return sub_bus; |
| } |
| |
| int __init |
| pciauto_assign_resources(int busno, struct pci_channel *hose) |
| { |
| /* setup resource limits */ |
| io_resource_inuse = hose->io_resource; |
| mem_resource_inuse = hose->mem_resource; |
| |
| pciauto_lower_iospc = io_resource_inuse->start; |
| pciauto_upper_iospc = io_resource_inuse->end + 1; |
| pciauto_lower_memspc = mem_resource_inuse->start; |
| pciauto_upper_memspc = mem_resource_inuse->end + 1; |
| DBG("Autoconfig PCI channel 0x%p\n", hose); |
| DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n", |
| busno, pciauto_lower_iospc, pciauto_upper_iospc, |
| pciauto_lower_memspc, pciauto_upper_memspc); |
| |
| return pciauto_bus_scan(hose, busno, busno); |
| } |
