Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] SB1: Check for -mno-sched-prolog if building corelis debug kernel.
[MIPS] Sibyte: Fix race in sb1250_gettimeoffset().
[MIPS] Sibyte: Fix interrupt timer off by one bug.
[MIPS] Sibyte: Fix M_SCD_TIMER_INIT and M_SCD_TIMER_CNT wrong field width.
[MIPS] Protect more of timer_interrupt() by xtime_lock.
[MIPS] Work around bad code generation for <asm/io.h>.
[MIPS] Simple patch to power off DBAU1200
[MIPS] Fix DBAu1550 software power off.
[MIPS] local_r4k_flush_cache_page fix
[MIPS] SB1: Fix interrupt disable hazard.
[MIPS] Get rid of the IP22-specific code in arclib.
Update MAINTAINERS entry for MIPS.
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index e99dfbb..87d79df 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -15,20 +15,6 @@
To compile this driver as a module, choose M here: the
module will be called cx8800
-config VIDEO_CX88_DVB
- tristate "DVB/ATSC Support for cx2388x based TV cards"
- depends on VIDEO_CX88 && DVB_CORE
- select VIDEO_BUF_DVB
- ---help---
- This adds support for DVB/ATSC cards based on the
- Connexant 2388x chip.
-
- To compile this driver as a module, choose M here: the
- module will be called cx88-dvb.
-
- You must also select one or more DVB/ATSC demodulators.
- If you are unsure which you need, choose all of them.
-
config VIDEO_CX88_ALSA
tristate "ALSA DMA audio support"
depends on VIDEO_CX88 && SND && EXPERIMENTAL
@@ -44,6 +30,20 @@
To compile this driver as a module, choose M here: the
module will be called cx88-alsa.
+config VIDEO_CX88_DVB
+ tristate "DVB/ATSC Support for cx2388x based TV cards"
+ depends on VIDEO_CX88 && DVB_CORE
+ select VIDEO_BUF_DVB
+ ---help---
+ This adds support for DVB/ATSC cards based on the
+ Connexant 2388x chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cx88-dvb.
+
+ You must also select one or more DVB/ATSC demodulators.
+ If you are unsure which you need, choose all of them.
+
config VIDEO_CX88_DVB_ALL_FRONTENDS
bool "Build all supported frontends for cx2388x based TV cards"
default y
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 94a14a2..5b26780 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -367,6 +367,9 @@
em28xx_capture_start(dev, 1);
em28xx_resolution_set(dev);
+ /* device needs to be initialized before isoc transfer */
+ video_mux(dev, 0);
+
/* start the transfer */
errCode = em28xx_init_isoc(dev);
if (errCode)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b8f1524..caf4102 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9552,12 +9552,36 @@
}
}
- /* Find msi capability. */
+ /* The EPB bridge inside 5714, 5715, and 5780 cannot support
+ * DMA addresses > 40-bit. This bridge may have other additional
+ * 57xx devices behind it in some 4-port NIC designs for example.
+ * Any tg3 device found behind the bridge will also need the 40-bit
+ * DMA workaround.
+ */
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
+ tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
}
+ else {
+ struct pci_dev *bridge = NULL;
+
+ do {
+ bridge = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_EPB,
+ bridge);
+ if (bridge && bridge->subordinate &&
+ (bridge->subordinate->number <=
+ tp->pdev->bus->number) &&
+ (bridge->subordinate->subordinate >=
+ tp->pdev->bus->number)) {
+ tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
+ pci_dev_put(bridge);
+ break;
+ }
+ } while (bridge);
+ }
/* Initialize misc host control in PCI block. */
tp->misc_host_ctrl |= (misc_ctrl_reg &
@@ -10303,7 +10327,14 @@
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f);
- if (ccval == 0x6 || ccval == 0x7)
+ /* If the 5704 is behind the EPB bridge, we can
+ * do the less restrictive ONE_DMA workaround for
+ * better performance.
+ */
+ if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
+ tp->dma_rwctrl |= 0x8000;
+ else if (ccval == 0x6 || ccval == 0x7)
tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
/* Set bit 23 to enable PCIX hw bug fix */
@@ -10759,19 +10790,20 @@
goto err_out_iounmap;
}
- /* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit.
+ /* The EPB bridge inside 5714, 5715, and 5780 and any
+ * device behind the EPB cannot support DMA addresses > 40-bit.
* On 64-bit systems with IOMMU, use 40-bit dma_mask.
* On 64-bit systems without IOMMU, use 64-bit dma_mask and
* do DMA address check in tg3_start_xmit().
*/
- if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
+ if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
+ persist_dma_mask = dma_mask = DMA_32BIT_MASK;
+ else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) {
persist_dma_mask = dma_mask = DMA_40BIT_MASK;
#ifdef CONFIG_HIGHMEM
dma_mask = DMA_64BIT_MASK;
#endif
- } else if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
- persist_dma_mask = dma_mask = DMA_32BIT_MASK;
- else
+ } else
persist_dma_mask = dma_mask = DMA_64BIT_MASK;
/* Configure DMA attributes. */
@@ -10908,8 +10940,10 @@
(tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0,
(tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,
(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
- printk(KERN_INFO "%s: dma_rwctrl[%08x]\n",
- dev->name, tp->dma_rwctrl);
+ printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
+ dev->name, tp->dma_rwctrl,
+ (pdev->dma_mask == DMA_32BIT_MASK) ? 32 :
+ (((u64) pdev->dma_mask == DMA_40BIT_MASK) ? 40 : 64));
return 0;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 7f4b7f6..7e3b613 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2163,6 +2163,7 @@
#define TG3_FLAG_10_100_ONLY 0x01000000
#define TG3_FLAG_PAUSE_AUTONEG 0x02000000
#define TG3_FLAG_IN_RESET_TASK 0x04000000
+#define TG3_FLAG_40BIT_DMA_BUG 0x08000000
#define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000
#define TG3_FLAG_GOT_SERDES_FLOWCTL 0x20000000
#define TG3_FLAG_SPLIT_MODE 0x40000000
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1709b50..751eea5 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1365,6 +1365,7 @@
#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008
#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009
#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
+#define PCI_DEVICE_ID_SERVERWORKS_EPB 0x0103
#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200
#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201
#define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203
diff --git a/include/net/ax25.h b/include/net/ax25.h
index 2250a18..d052b22 100644
--- a/include/net/ax25.h
+++ b/include/net/ax25.h
@@ -110,8 +110,15 @@
enum {
AX25_PROTO_STD_SIMPLEX,
AX25_PROTO_STD_DUPLEX,
+#ifdef CONFIG_AX25_DAMA_SLAVE
AX25_PROTO_DAMA_SLAVE,
- AX25_PROTO_DAMA_MASTER
+#ifdef CONFIG_AX25_DAMA_MASTER
+ AX25_PROTO_DAMA_MASTER,
+#define AX25_PROTO_MAX AX25_PROTO_DAMA_MASTER
+#endif
+#endif
+ __AX25_PROTO_MAX,
+ AX25_PROTO_MAX = __AX25_PROTO_MAX -1
};
enum {
diff --git a/kernel/fork.c b/kernel/fork.c
index 46060cb..b373322 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1478,9 +1478,7 @@
if ((unshare_flags & CLONE_VM) &&
(mm && atomic_read(&mm->mm_users) > 1)) {
- *new_mmp = dup_mm(current);
- if (!*new_mmp)
- return -ENOMEM;
+ return -EINVAL;
}
return 0;
diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c
index f67711f..894a225 100644
--- a/net/ax25/sysctl_net_ax25.c
+++ b/net/ax25/sysctl_net_ax25.c
@@ -24,7 +24,7 @@
static int min_idle[1], max_idle[] = {65535 * HZ};
static int min_n2[] = {1}, max_n2[] = {31};
static int min_paclen[] = {1}, max_paclen[] = {512};
-static int min_proto[1], max_proto[] = {3};
+static int min_proto[1], max_proto[] = { AX25_PROTO_MAX };
static int min_ds_timeout[1], max_ds_timeout[] = {65535 * HZ};
static struct ctl_table_header *ax25_table_header;
