| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1999-2008 Silicon Graphics, Inc. All rights reserved. |
| */ |
| |
| |
| /* |
| * Cross Partition Network Interface (XPNET) support |
| * |
| * XPNET provides a virtual network layered on top of the Cross |
| * Partition communication layer. |
| * |
| * XPNET provides direct point-to-point and broadcast-like support |
| * for an ethernet-like device. The ethernet broadcast medium is |
| * replaced with a point-to-point message structure which passes |
| * pointers to a DMA-capable block that a remote partition should |
| * retrieve and pass to the upper level networking layer. |
| * |
| */ |
| |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/delay.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/smp.h> |
| #include <linux/string.h> |
| #include <asm/sn/bte.h> |
| #include <asm/sn/io.h> |
| #include <asm/sn/sn_sal.h> |
| #include <asm/types.h> |
| #include <asm/atomic.h> |
| #include "xp.h" |
| |
| |
| /* |
| * The message payload transferred by XPC. |
| * |
| * buf_pa is the physical address where the DMA should pull from. |
| * |
| * NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a |
| * cacheline boundary. To accomplish this, we record the number of |
| * bytes from the beginning of the first cacheline to the first useful |
| * byte of the skb (leadin_ignore) and the number of bytes from the |
| * last useful byte of the skb to the end of the last cacheline |
| * (tailout_ignore). |
| * |
| * size is the number of bytes to transfer which includes the skb->len |
| * (useful bytes of the senders skb) plus the leadin and tailout |
| */ |
| struct xpnet_message { |
| u16 version; /* Version for this message */ |
| u16 embedded_bytes; /* #of bytes embedded in XPC message */ |
| u32 magic; /* Special number indicating this is xpnet */ |
| u64 buf_pa; /* phys address of buffer to retrieve */ |
| u32 size; /* #of bytes in buffer */ |
| u8 leadin_ignore; /* #of bytes to ignore at the beginning */ |
| u8 tailout_ignore; /* #of bytes to ignore at the end */ |
| unsigned char data; /* body of small packets */ |
| }; |
| |
| /* |
| * Determine the size of our message, the cacheline aligned size, |
| * and then the number of message will request from XPC. |
| * |
| * XPC expects each message to exist in an individual cacheline. |
| */ |
| #define XPNET_MSG_SIZE (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET) |
| #define XPNET_MSG_DATA_MAX \ |
| (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data)) |
| #define XPNET_MSG_ALIGNED_SIZE (L1_CACHE_ALIGN(XPNET_MSG_SIZE)) |
| #define XPNET_MSG_NENTRIES (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE) |
| |
| |
| #define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1) |
| #define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1) |
| |
| /* |
| * Version number of XPNET implementation. XPNET can always talk to versions |
| * with same major #, and never talk to versions with a different version. |
| */ |
| #define _XPNET_VERSION(_major, _minor) (((_major) << 4) | (_minor)) |
| #define XPNET_VERSION_MAJOR(_v) ((_v) >> 4) |
| #define XPNET_VERSION_MINOR(_v) ((_v) & 0xf) |
| |
| #define XPNET_VERSION _XPNET_VERSION(1,0) /* version 1.0 */ |
| #define XPNET_VERSION_EMBED _XPNET_VERSION(1,1) /* version 1.1 */ |
| #define XPNET_MAGIC 0x88786984 /* "XNET" */ |
| |
| #define XPNET_VALID_MSG(_m) \ |
| ((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \ |
| && (msg->magic == XPNET_MAGIC)) |
| |
| #define XPNET_DEVICE_NAME "xp0" |
| |
| |
| /* |
| * When messages are queued with xpc_send_notify, a kmalloc'd buffer |
| * of the following type is passed as a notification cookie. When the |
| * notification function is called, we use the cookie to decide |
| * whether all outstanding message sends have completed. The skb can |
| * then be released. |
| */ |
| struct xpnet_pending_msg { |
| struct list_head free_list; |
| struct sk_buff *skb; |
| atomic_t use_count; |
| }; |
| |
| /* driver specific structure pointed to by the device structure */ |
| struct xpnet_dev_private { |
| struct net_device_stats stats; |
| }; |
| |
| struct net_device *xpnet_device; |
| |
| /* |
| * When we are notified of other partitions activating, we add them to |
| * our bitmask of partitions to which we broadcast. |
| */ |
| static u64 xpnet_broadcast_partitions; |
| /* protect above */ |
| static DEFINE_SPINLOCK(xpnet_broadcast_lock); |
| |
| /* |
| * Since the Block Transfer Engine (BTE) is being used for the transfer |
| * and it relies upon cache-line size transfers, we need to reserve at |
| * least one cache-line for head and tail alignment. The BTE is |
| * limited to 8MB transfers. |
| * |
| * Testing has shown that changing MTU to greater than 64KB has no effect |
| * on TCP as the two sides negotiate a Max Segment Size that is limited |
| * to 64K. Other protocols May use packets greater than this, but for |
| * now, the default is 64KB. |
| */ |
| #define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES) |
| /* 32KB has been determined to be the ideal */ |
| #define XPNET_DEF_MTU (0x8000UL) |
| |
| |
| /* |
| * The partition id is encapsulated in the MAC address. The following |
| * define locates the octet the partid is in. |
| */ |
| #define XPNET_PARTID_OCTET 1 |
| #define XPNET_LICENSE_OCTET 2 |
| |
| |
| /* |
| * Define the XPNET debug device structure that is to be used with dev_dbg(), |
| * dev_err(), dev_warn(), and dev_info(). |
| */ |
| struct device_driver xpnet_dbg_name = { |
| .name = "xpnet" |
| }; |
| |
| struct device xpnet_dbg_subname = { |
| .bus_id = {0}, /* set to "" */ |
| .driver = &xpnet_dbg_name |
| }; |
| |
| struct device *xpnet = &xpnet_dbg_subname; |
| |
| /* |
| * Packet was recevied by XPC and forwarded to us. |
| */ |
| static void |
| xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg) |
| { |
| struct sk_buff *skb; |
| bte_result_t bret; |
| struct xpnet_dev_private *priv = |
| (struct xpnet_dev_private *) xpnet_device->priv; |
| |
| |
| if (!XPNET_VALID_MSG(msg)) { |
| /* |
| * Packet with a different XPC version. Ignore. |
| */ |
| xpc_received(partid, channel, (void *) msg); |
| |
| priv->stats.rx_errors++; |
| |
| return; |
| } |
| dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size, |
| msg->leadin_ignore, msg->tailout_ignore); |
| |
| |
| /* reserve an extra cache line */ |
| skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES); |
| if (!skb) { |
| dev_err(xpnet, "failed on dev_alloc_skb(%d)\n", |
| msg->size + L1_CACHE_BYTES); |
| |
| xpc_received(partid, channel, (void *) msg); |
| |
| priv->stats.rx_errors++; |
| |
| return; |
| } |
| |
| /* |
| * The allocated skb has some reserved space. |
| * In order to use bte_copy, we need to get the |
| * skb->data pointer moved forward. |
| */ |
| skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data & |
| (L1_CACHE_BYTES - 1)) + |
| msg->leadin_ignore)); |
| |
| /* |
| * Update the tail pointer to indicate data actually |
| * transferred. |
| */ |
| skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore)); |
| |
| /* |
| * Move the data over from the other side. |
| */ |
| if ((XPNET_VERSION_MINOR(msg->version) == 1) && |
| (msg->embedded_bytes != 0)) { |
| dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, " |
| "%lu)\n", skb->data, &msg->data, |
| (size_t) msg->embedded_bytes); |
| |
| skb_copy_to_linear_data(skb, &msg->data, (size_t)msg->embedded_bytes); |
| } else { |
| dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t" |
| "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa, |
| (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), |
| msg->size); |
| |
| bret = bte_copy(msg->buf_pa, |
| __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), |
| msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL); |
| |
| if (bret != BTE_SUCCESS) { |
| // >>> Need better way of cleaning skb. Currently skb |
| // >>> appears in_use and we can't just call |
| // >>> dev_kfree_skb. |
| dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned " |
| "error=0x%x\n", (void *)msg->buf_pa, |
| (void *)__pa((u64)skb->data & |
| ~(L1_CACHE_BYTES - 1)), |
| msg->size, bret); |
| |
| xpc_received(partid, channel, (void *) msg); |
| |
| priv->stats.rx_errors++; |
| |
| return; |
| } |
| } |
| |
| dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p " |
| "skb->end=0x%p skb->len=%d\n", (void *) skb->head, |
| (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), |
| skb->len); |
| |
| skb->protocol = eth_type_trans(skb, xpnet_device); |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| |
| dev_dbg(xpnet, "passing skb to network layer\n" |
| KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p " |
| "skb->end=0x%p skb->len=%d\n", |
| (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), |
| skb_end_pointer(skb), skb->len); |
| |
| |
| xpnet_device->last_rx = jiffies; |
| priv->stats.rx_packets++; |
| priv->stats.rx_bytes += skb->len + ETH_HLEN; |
| |
| netif_rx_ni(skb); |
| xpc_received(partid, channel, (void *) msg); |
| } |
| |
| |
| /* |
| * This is the handler which XPC calls during any sort of change in |
| * state or message reception on a connection. |
| */ |
| static void |
| xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel, |
| void *data, void *key) |
| { |
| long bp; |
| |
| |
| DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); |
| DBUG_ON(channel != XPC_NET_CHANNEL); |
| |
| switch(reason) { |
| case xpcMsgReceived: /* message received */ |
| DBUG_ON(data == NULL); |
| |
| xpnet_receive(partid, channel, (struct xpnet_message *) data); |
| break; |
| |
| case xpcConnected: /* connection completed to a partition */ |
| spin_lock_bh(&xpnet_broadcast_lock); |
| xpnet_broadcast_partitions |= 1UL << (partid -1 ); |
| bp = xpnet_broadcast_partitions; |
| spin_unlock_bh(&xpnet_broadcast_lock); |
| |
| netif_carrier_on(xpnet_device); |
| |
| dev_dbg(xpnet, "%s connection created to partition %d; " |
| "xpnet_broadcast_partitions=0x%lx\n", |
| xpnet_device->name, partid, bp); |
| break; |
| |
| default: |
| spin_lock_bh(&xpnet_broadcast_lock); |
| xpnet_broadcast_partitions &= ~(1UL << (partid -1 )); |
| bp = xpnet_broadcast_partitions; |
| spin_unlock_bh(&xpnet_broadcast_lock); |
| |
| if (bp == 0) { |
| netif_carrier_off(xpnet_device); |
| } |
| |
| dev_dbg(xpnet, "%s disconnected from partition %d; " |
| "xpnet_broadcast_partitions=0x%lx\n", |
| xpnet_device->name, partid, bp); |
| break; |
| |
| } |
| } |
| |
| |
| static int |
| xpnet_dev_open(struct net_device *dev) |
| { |
| enum xpc_retval ret; |
| |
| |
| dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, " |
| "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity, |
| XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS, |
| XPNET_MAX_IDLE_KTHREADS); |
| |
| ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL, |
| XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, |
| XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS); |
| if (ret != xpcSuccess) { |
| dev_err(xpnet, "ifconfig up of %s failed on XPC connect, " |
| "ret=%d\n", dev->name, ret); |
| |
| return -ENOMEM; |
| } |
| |
| dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name); |
| |
| return 0; |
| } |
| |
| |
| static int |
| xpnet_dev_stop(struct net_device *dev) |
| { |
| xpc_disconnect(XPC_NET_CHANNEL); |
| |
| dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name); |
| |
| return 0; |
| } |
| |
| |
| static int |
| xpnet_dev_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| /* 68 comes from min TCP+IP+MAC header */ |
| if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) { |
| dev_err(xpnet, "ifconfig %s mtu %d failed; value must be " |
| "between 68 and %ld\n", dev->name, new_mtu, |
| XPNET_MAX_MTU); |
| return -EINVAL; |
| } |
| |
| dev->mtu = new_mtu; |
| dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu); |
| return 0; |
| } |
| |
| |
| /* |
| * Required for the net_device structure. |
| */ |
| static int |
| xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map) |
| { |
| return 0; |
| } |
| |
| |
| /* |
| * Return statistics to the caller. |
| */ |
| static struct net_device_stats * |
| xpnet_dev_get_stats(struct net_device *dev) |
| { |
| struct xpnet_dev_private *priv; |
| |
| |
| priv = (struct xpnet_dev_private *) dev->priv; |
| |
| return &priv->stats; |
| } |
| |
| |
| /* |
| * Notification that the other end has received the message and |
| * DMA'd the skb information. At this point, they are done with |
| * our side. When all recipients are done processing, we |
| * release the skb and then release our pending message structure. |
| */ |
| static void |
| xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel, |
| void *__qm) |
| { |
| struct xpnet_pending_msg *queued_msg = |
| (struct xpnet_pending_msg *) __qm; |
| |
| |
| DBUG_ON(queued_msg == NULL); |
| |
| dev_dbg(xpnet, "message to %d notified with reason %d\n", |
| partid, reason); |
| |
| if (atomic_dec_return(&queued_msg->use_count) == 0) { |
| dev_dbg(xpnet, "all acks for skb->head=-x%p\n", |
| (void *) queued_msg->skb->head); |
| |
| dev_kfree_skb_any(queued_msg->skb); |
| kfree(queued_msg); |
| } |
| } |
| |
| |
| /* |
| * Network layer has formatted a packet (skb) and is ready to place it |
| * "on the wire". Prepare and send an xpnet_message to all partitions |
| * which have connected with us and are targets of this packet. |
| * |
| * MAC-NOTE: For the XPNET driver, the MAC address contains the |
| * destination partition_id. If the destination partition id word |
| * is 0xff, this packet is to broadcast to all partitions. |
| */ |
| static int |
| xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct xpnet_pending_msg *queued_msg; |
| enum xpc_retval ret; |
| struct xpnet_message *msg; |
| u64 start_addr, end_addr; |
| long dp; |
| u8 second_mac_octet; |
| partid_t dest_partid; |
| struct xpnet_dev_private *priv; |
| u16 embedded_bytes; |
| |
| |
| priv = (struct xpnet_dev_private *) dev->priv; |
| |
| |
| dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p " |
| "skb->end=0x%p skb->len=%d\n", (void *) skb->head, |
| (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), |
| skb->len); |
| |
| |
| /* |
| * The xpnet_pending_msg tracks how many outstanding |
| * xpc_send_notifies are relying on this skb. When none |
| * remain, release the skb. |
| */ |
| queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC); |
| if (queued_msg == NULL) { |
| dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping " |
| "packet\n", sizeof(struct xpnet_pending_msg)); |
| |
| priv->stats.tx_errors++; |
| |
| return -ENOMEM; |
| } |
| |
| |
| /* get the beginning of the first cacheline and end of last */ |
| start_addr = ((u64) skb->data & ~(L1_CACHE_BYTES - 1)); |
| end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb)); |
| |
| /* calculate how many bytes to embed in the XPC message */ |
| embedded_bytes = 0; |
| if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) { |
| /* skb->data does fit so embed */ |
| embedded_bytes = skb->len; |
| } |
| |
| |
| /* |
| * Since the send occurs asynchronously, we set the count to one |
| * and begin sending. Any sends that happen to complete before |
| * we are done sending will not free the skb. We will be left |
| * with that task during exit. This also handles the case of |
| * a packet destined for a partition which is no longer up. |
| */ |
| atomic_set(&queued_msg->use_count, 1); |
| queued_msg->skb = skb; |
| |
| |
| second_mac_octet = skb->data[XPNET_PARTID_OCTET]; |
| if (second_mac_octet == 0xff) { |
| /* we are being asked to broadcast to all partitions */ |
| dp = xpnet_broadcast_partitions; |
| } else if (second_mac_octet != 0) { |
| dp = xpnet_broadcast_partitions & |
| (1UL << (second_mac_octet - 1)); |
| } else { |
| /* 0 is an invalid partid. Ignore */ |
| dp = 0; |
| } |
| dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp); |
| |
| /* |
| * If we wanted to allow promiscuous mode to work like an |
| * unswitched network, this would be a good point to OR in a |
| * mask of partitions which should be receiving all packets. |
| */ |
| |
| /* |
| * Main send loop. |
| */ |
| for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS; |
| dest_partid++) { |
| |
| |
| if (!(dp & (1UL << (dest_partid - 1)))) { |
| /* not destined for this partition */ |
| continue; |
| } |
| |
| /* remove this partition from the destinations mask */ |
| dp &= ~(1UL << (dest_partid - 1)); |
| |
| |
| /* found a partition to send to */ |
| |
| ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL, |
| XPC_NOWAIT, (void **)&msg); |
| if (unlikely(ret != xpcSuccess)) { |
| continue; |
| } |
| |
| msg->embedded_bytes = embedded_bytes; |
| if (unlikely(embedded_bytes != 0)) { |
| msg->version = XPNET_VERSION_EMBED; |
| dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n", |
| &msg->data, skb->data, (size_t) embedded_bytes); |
| skb_copy_from_linear_data(skb, &msg->data, |
| (size_t)embedded_bytes); |
| } else { |
| msg->version = XPNET_VERSION; |
| } |
| msg->magic = XPNET_MAGIC; |
| msg->size = end_addr - start_addr; |
| msg->leadin_ignore = (u64) skb->data - start_addr; |
| msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb); |
| msg->buf_pa = __pa(start_addr); |
| |
| dev_dbg(xpnet, "sending XPC message to %d:%d\n" |
| KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " |
| "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", |
| dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, |
| msg->leadin_ignore, msg->tailout_ignore); |
| |
| |
| atomic_inc(&queued_msg->use_count); |
| |
| ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg, |
| xpnet_send_completed, queued_msg); |
| if (unlikely(ret != xpcSuccess)) { |
| atomic_dec(&queued_msg->use_count); |
| continue; |
| } |
| |
| } |
| |
| if (atomic_dec_return(&queued_msg->use_count) == 0) { |
| dev_dbg(xpnet, "no partitions to receive packet destined for " |
| "%d\n", dest_partid); |
| |
| |
| dev_kfree_skb(skb); |
| kfree(queued_msg); |
| } |
| |
| priv->stats.tx_packets++; |
| priv->stats.tx_bytes += skb->len; |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Deal with transmit timeouts coming from the network layer. |
| */ |
| static void |
| xpnet_dev_tx_timeout (struct net_device *dev) |
| { |
| struct xpnet_dev_private *priv; |
| |
| |
| priv = (struct xpnet_dev_private *) dev->priv; |
| |
| priv->stats.tx_errors++; |
| return; |
| } |
| |
| |
| static int __init |
| xpnet_init(void) |
| { |
| int i; |
| u32 license_num; |
| int result = -ENOMEM; |
| |
| |
| if (!ia64_platform_is("sn2")) { |
| return -ENODEV; |
| } |
| |
| dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME); |
| |
| /* |
| * use ether_setup() to init the majority of our device |
| * structure and then override the necessary pieces. |
| */ |
| xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private), |
| XPNET_DEVICE_NAME, ether_setup); |
| if (xpnet_device == NULL) { |
| return -ENOMEM; |
| } |
| |
| netif_carrier_off(xpnet_device); |
| |
| xpnet_device->mtu = XPNET_DEF_MTU; |
| xpnet_device->change_mtu = xpnet_dev_change_mtu; |
| xpnet_device->open = xpnet_dev_open; |
| xpnet_device->get_stats = xpnet_dev_get_stats; |
| xpnet_device->stop = xpnet_dev_stop; |
| xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit; |
| xpnet_device->tx_timeout = xpnet_dev_tx_timeout; |
| xpnet_device->set_config = xpnet_dev_set_config; |
| |
| /* |
| * Multicast assumes the LSB of the first octet is set for multicast |
| * MAC addresses. We chose the first octet of the MAC to be unlikely |
| * to collide with any vendor's officially issued MAC. |
| */ |
| xpnet_device->dev_addr[0] = 0xfe; |
| xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id; |
| license_num = sn_partition_serial_number_val(); |
| for (i = 3; i >= 0; i--) { |
| xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] = |
| license_num & 0xff; |
| license_num = license_num >> 8; |
| } |
| |
| /* |
| * ether_setup() sets this to a multicast device. We are |
| * really not supporting multicast at this time. |
| */ |
| xpnet_device->flags &= ~IFF_MULTICAST; |
| |
| /* |
| * No need to checksum as it is a DMA transfer. The BTE will |
| * report an error if the data is not retrievable and the |
| * packet will be dropped. |
| */ |
| xpnet_device->features = NETIF_F_NO_CSUM; |
| |
| result = register_netdev(xpnet_device); |
| if (result != 0) { |
| free_netdev(xpnet_device); |
| } |
| |
| return result; |
| } |
| module_init(xpnet_init); |
| |
| |
| static void __exit |
| xpnet_exit(void) |
| { |
| dev_info(xpnet, "unregistering network device %s\n", |
| xpnet_device[0].name); |
| |
| unregister_netdev(xpnet_device); |
| |
| free_netdev(xpnet_device); |
| } |
| module_exit(xpnet_exit); |
| |
| |
| MODULE_AUTHOR("Silicon Graphics, Inc."); |
| MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)"); |
| MODULE_LICENSE("GPL"); |
| |