| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1994, 1995 Waldorf Electronics |
| * Written by Ralf Baechle and Andreas Busse |
| * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 Ralf Baechle |
| * Copyright (C) 1996 Paul M. Antoine |
| * Modified for DECStation and hence R3000 support by Paul M. Antoine |
| * Further modifications by David S. Miller and Harald Koerfgen |
| * Copyright (C) 1999 Silicon Graphics, Inc. |
| * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. |
| */ |
| #include <linux/config.h> |
| #include <linux/init.h> |
| #include <linux/threads.h> |
| |
| #include <asm/asm.h> |
| #include <asm/asmmacro.h> |
| #include <asm/regdef.h> |
| #include <asm/page.h> |
| #include <asm/mipsregs.h> |
| #include <asm/stackframe.h> |
| |
| #include <kernel-entry-init.h> |
| |
| .macro ARC64_TWIDDLE_PC |
| #if defined(CONFIG_ARC64) || defined(CONFIG_MAPPED_KERNEL) |
| /* We get launched at a XKPHYS address but the kernel is linked to |
| run at a KSEG0 address, so jump there. */ |
| PTR_LA t0, \@f |
| jr t0 |
| \@: |
| #endif |
| .endm |
| |
| /* |
| * inputs are the text nasid in t1, data nasid in t2. |
| */ |
| .macro MAPPED_KERNEL_SETUP_TLB |
| #ifdef CONFIG_MAPPED_KERNEL |
| /* |
| * This needs to read the nasid - assume 0 for now. |
| * Drop in 0xffffffffc0000000 in tlbhi, 0+VG in tlblo_0, |
| * 0+DVG in tlblo_1. |
| */ |
| dli t0, 0xffffffffc0000000 |
| dmtc0 t0, CP0_ENTRYHI |
| li t0, 0x1c000 # Offset of text into node memory |
| dsll t1, NASID_SHFT # Shift text nasid into place |
| dsll t2, NASID_SHFT # Same for data nasid |
| or t1, t1, t0 # Physical load address of kernel text |
| or t2, t2, t0 # Physical load address of kernel data |
| dsrl t1, 12 # 4K pfn |
| dsrl t2, 12 # 4K pfn |
| dsll t1, 6 # Get pfn into place |
| dsll t2, 6 # Get pfn into place |
| li t0, ((_PAGE_GLOBAL|_PAGE_VALID| _CACHE_CACHABLE_COW) >> 6) |
| or t0, t0, t1 |
| mtc0 t0, CP0_ENTRYLO0 # physaddr, VG, cach exlwr |
| li t0, ((_PAGE_GLOBAL|_PAGE_VALID| _PAGE_DIRTY|_CACHE_CACHABLE_COW) >> 6) |
| or t0, t0, t2 |
| mtc0 t0, CP0_ENTRYLO1 # physaddr, DVG, cach exlwr |
| li t0, 0x1ffe000 # MAPPED_KERN_TLBMASK, TLBPGMASK_16M |
| mtc0 t0, CP0_PAGEMASK |
| li t0, 0 # KMAP_INX |
| mtc0 t0, CP0_INDEX |
| li t0, 1 |
| mtc0 t0, CP0_WIRED |
| tlbwi |
| #else |
| mtc0 zero, CP0_WIRED |
| #endif |
| .endm |
| |
| /* |
| * For the moment disable interrupts, mark the kernel mode and |
| * set ST0_KX so that the CPU does not spit fire when using |
| * 64-bit addresses. A full initialization of the CPU's status |
| * register is done later in per_cpu_trap_init(). |
| */ |
| .macro setup_c0_status set clr |
| .set push |
| #ifdef CONFIG_MIPS_MT_SMTC |
| /* |
| * For SMTC, we need to set privilege and disable interrupts only for |
| * the current TC, using the TCStatus register. |
| */ |
| mfc0 t0, CP0_TCSTATUS |
| /* Fortunately CU 0 is in the same place in both registers */ |
| /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */ |
| li t1, ST0_CU0 | 0x08001c00 |
| or t0, t1 |
| /* Clear TKSU, leave IXMT */ |
| xori t0, 0x00001800 |
| mtc0 t0, CP0_TCSTATUS |
| _ehb |
| /* We need to leave the global IE bit set, but clear EXL...*/ |
| mfc0 t0, CP0_STATUS |
| or t0, ST0_CU0 | ST0_EXL | ST0_ERL | \set | \clr |
| xor t0, ST0_EXL | ST0_ERL | \clr |
| mtc0 t0, CP0_STATUS |
| #else |
| mfc0 t0, CP0_STATUS |
| or t0, ST0_CU0|\set|0x1f|\clr |
| xor t0, 0x1f|\clr |
| mtc0 t0, CP0_STATUS |
| .set noreorder |
| sll zero,3 # ehb |
| #endif |
| .set pop |
| .endm |
| |
| .macro setup_c0_status_pri |
| #ifdef CONFIG_64BIT |
| setup_c0_status ST0_KX 0 |
| #else |
| setup_c0_status 0 0 |
| #endif |
| .endm |
| |
| .macro setup_c0_status_sec |
| #ifdef CONFIG_64BIT |
| setup_c0_status ST0_KX ST0_BEV |
| #else |
| setup_c0_status 0 ST0_BEV |
| #endif |
| .endm |
| |
| /* |
| * Reserved space for exception handlers. |
| * Necessary for machines which link their kernels at KSEG0. |
| */ |
| .fill 0x400 |
| |
| EXPORT(stext) # used for profiling |
| EXPORT(_stext) |
| |
| #if defined(CONFIG_QEMU) || defined(CONFIG_MIPS_SIM) |
| /* |
| * Give us a fighting chance of running if execution beings at the |
| * kernel load address. This is needed because this platform does |
| * not have a ELF loader yet. |
| */ |
| j kernel_entry |
| #endif |
| __INIT |
| |
| NESTED(kernel_entry, 16, sp) # kernel entry point |
| |
| kernel_entry_setup # cpu specific setup |
| |
| setup_c0_status_pri |
| |
| ARC64_TWIDDLE_PC |
| |
| #ifdef CONFIG_MIPS_MT_SMTC |
| /* |
| * In SMTC kernel, "CLI" is thread-specific, in TCStatus. |
| * We still need to enable interrupts globally in Status, |
| * and clear EXL/ERL. |
| * |
| * TCContext is used to track interrupt levels under |
| * service in SMTC kernel. Clear for boot TC before |
| * allowing any interrupts. |
| */ |
| mtc0 zero, CP0_TCCONTEXT |
| |
| mfc0 t0, CP0_STATUS |
| ori t0, t0, 0xff1f |
| xori t0, t0, 0x001e |
| mtc0 t0, CP0_STATUS |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| |
| PTR_LA t0, __bss_start # clear .bss |
| LONG_S zero, (t0) |
| PTR_LA t1, __bss_stop - LONGSIZE |
| 1: |
| PTR_ADDIU t0, LONGSIZE |
| LONG_S zero, (t0) |
| bne t0, t1, 1b |
| |
| LONG_S a0, fw_arg0 # firmware arguments |
| LONG_S a1, fw_arg1 |
| LONG_S a2, fw_arg2 |
| LONG_S a3, fw_arg3 |
| |
| MTC0 zero, CP0_CONTEXT # clear context register |
| PTR_LA $28, init_thread_union |
| PTR_ADDIU sp, $28, _THREAD_SIZE - 32 |
| set_saved_sp sp, t0, t1 |
| PTR_SUBU sp, 4 * SZREG # init stack pointer |
| |
| j start_kernel |
| END(kernel_entry) |
| |
| #ifdef CONFIG_QEMU |
| __INIT |
| #endif |
| |
| #ifdef CONFIG_SMP |
| /* |
| * SMP slave cpus entry point. Board specific code for bootstrap calls this |
| * function after setting up the stack and gp registers. |
| */ |
| NESTED(smp_bootstrap, 16, sp) |
| #ifdef CONFIG_MIPS_MT_SMTC |
| /* |
| * Read-modify-writes of Status must be atomic, and this |
| * is one case where CLI is invoked without EXL being |
| * necessarily set. The CLI and setup_c0_status will |
| * in fact be redundant for all but the first TC of |
| * each VPE being booted. |
| */ |
| DMT 10 # dmt t2 /* t0, t1 are used by CLI and setup_c0_status() */ |
| jal mips_ihb |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| setup_c0_status_sec |
| smp_slave_setup |
| #ifdef CONFIG_MIPS_MT_SMTC |
| andi t2, t2, VPECONTROL_TE |
| beqz t2, 2f |
| EMT # emt |
| 2: |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| j start_secondary |
| END(smp_bootstrap) |
| #endif /* CONFIG_SMP */ |
| |
| __FINIT |
| |
| .comm kernelsp, NR_CPUS * 8, 8 |
| .comm pgd_current, NR_CPUS * 8, 8 |
| |
| .comm fw_arg0, SZREG, SZREG # firmware arguments |
| .comm fw_arg1, SZREG, SZREG |
| .comm fw_arg2, SZREG, SZREG |
| .comm fw_arg3, SZREG, SZREG |
| |
| .macro page name, order |
| .comm \name, (_PAGE_SIZE << \order), (_PAGE_SIZE << \order) |
| .endm |
| |
| /* |
| * On 64-bit we've got three-level pagetables with a slightly |
| * different layout ... |
| */ |
| page swapper_pg_dir, _PGD_ORDER |
| #ifdef CONFIG_64BIT |
| page invalid_pmd_table, _PMD_ORDER |
| #endif |
| page invalid_pte_table, _PTE_ORDER |
