| /* |
| * linux/arch/alpha/kernel/sys_nautilus.c |
| * |
| * Copyright (C) 1995 David A Rusling |
| * Copyright (C) 1998 Richard Henderson |
| * Copyright (C) 1999 Alpha Processor, Inc., |
| * (David Daniel, Stig Telfer, Soohoon Lee) |
| * |
| * Code supporting NAUTILUS systems. |
| * |
| * |
| * NAUTILUS has the following I/O features: |
| * |
| * a) Driven by AMD 751 aka IRONGATE (northbridge): |
| * 4 PCI slots |
| * 1 AGP slot |
| * |
| * b) Driven by ALI M1543C (southbridge) |
| * 2 ISA slots |
| * 2 IDE connectors |
| * 1 dual drive capable FDD controller |
| * 2 serial ports |
| * 1 ECP/EPP/SP parallel port |
| * 2 USB ports |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/sched.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/reboot.h> |
| #include <linux/bootmem.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| #include <asm/dma.h> |
| #include <asm/irq.h> |
| #include <asm/mmu_context.h> |
| #include <asm/io.h> |
| #include <asm/pci.h> |
| #include <asm/pgtable.h> |
| #include <asm/core_irongate.h> |
| #include <asm/hwrpb.h> |
| #include <asm/tlbflush.h> |
| |
| #include "proto.h" |
| #include "err_impl.h" |
| #include "irq_impl.h" |
| #include "pci_impl.h" |
| #include "machvec_impl.h" |
| |
| |
| static void __init |
| nautilus_init_irq(void) |
| { |
| if (alpha_using_srm) { |
| alpha_mv.device_interrupt = srm_device_interrupt; |
| } |
| |
| init_i8259a_irqs(); |
| common_init_isa_dma(); |
| } |
| |
| static int __init |
| nautilus_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| /* Preserve the IRQ set up by the console. */ |
| |
| u8 irq; |
| /* UP1500: AGP INTA is actually routed to IRQ 5, not IRQ 10 as |
| console reports. Check the device id of AGP bridge to distinguish |
| UP1500 from UP1000/1100. Note: 'pin' is 2 due to bridge swizzle. */ |
| if (slot == 1 && pin == 2 && |
| dev->bus->self && dev->bus->self->device == 0x700f) |
| return 5; |
| pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); |
| return irq; |
| } |
| |
| void |
| nautilus_kill_arch(int mode) |
| { |
| struct pci_bus *bus = pci_isa_hose->bus; |
| u32 pmuport; |
| int off; |
| |
| switch (mode) { |
| case LINUX_REBOOT_CMD_RESTART: |
| if (! alpha_using_srm) { |
| u8 t8; |
| pci_bus_read_config_byte(bus, 0x38, 0x43, &t8); |
| pci_bus_write_config_byte(bus, 0x38, 0x43, t8 | 0x80); |
| outb(1, 0x92); |
| outb(0, 0x92); |
| /* NOTREACHED */ |
| } |
| break; |
| |
| case LINUX_REBOOT_CMD_POWER_OFF: |
| /* Assume M1543C */ |
| off = 0x2000; /* SLP_TYPE = 0, SLP_EN = 1 */ |
| pci_bus_read_config_dword(bus, 0x88, 0x10, &pmuport); |
| if (!pmuport) { |
| /* M1535D/D+ */ |
| off = 0x3400; /* SLP_TYPE = 5, SLP_EN = 1 */ |
| pci_bus_read_config_dword(bus, 0x88, 0xe0, &pmuport); |
| } |
| pmuport &= 0xfffe; |
| outw(0xffff, pmuport); /* Clear pending events. */ |
| outw(off, pmuport + 4); |
| /* NOTREACHED */ |
| break; |
| } |
| } |
| |
| /* Perform analysis of a machine check that arrived from the system (NMI) */ |
| |
| static void |
| naut_sys_machine_check(unsigned long vector, unsigned long la_ptr, |
| struct pt_regs *regs) |
| { |
| printk("PC %lx RA %lx\n", regs->pc, regs->r26); |
| irongate_pci_clr_err(); |
| } |
| |
| /* Machine checks can come from two sources - those on the CPU and those |
| in the system. They are analysed separately but all starts here. */ |
| |
| void |
| nautilus_machine_check(unsigned long vector, unsigned long la_ptr) |
| { |
| char *mchk_class; |
| |
| /* Now for some analysis. Machine checks fall into two classes -- |
| those picked up by the system, and those picked up by the CPU. |
| Add to that the two levels of severity - correctable or not. */ |
| |
| if (vector == SCB_Q_SYSMCHK |
| && ((IRONGATE0->dramms & 0x300) == 0x300)) { |
| unsigned long nmi_ctl; |
| |
| /* Clear ALI NMI */ |
| nmi_ctl = inb(0x61); |
| nmi_ctl |= 0x0c; |
| outb(nmi_ctl, 0x61); |
| nmi_ctl &= ~0x0c; |
| outb(nmi_ctl, 0x61); |
| |
| /* Write again clears error bits. */ |
| IRONGATE0->stat_cmd = IRONGATE0->stat_cmd & ~0x100; |
| mb(); |
| IRONGATE0->stat_cmd; |
| |
| /* Write again clears error bits. */ |
| IRONGATE0->dramms = IRONGATE0->dramms; |
| mb(); |
| IRONGATE0->dramms; |
| |
| draina(); |
| wrmces(0x7); |
| mb(); |
| return; |
| } |
| |
| if (vector == SCB_Q_SYSERR) |
| mchk_class = "Correctable"; |
| else if (vector == SCB_Q_SYSMCHK) |
| mchk_class = "Fatal"; |
| else { |
| ev6_machine_check(vector, la_ptr); |
| return; |
| } |
| |
| printk(KERN_CRIT "NAUTILUS Machine check 0x%lx " |
| "[%s System Machine Check (NMI)]\n", |
| vector, mchk_class); |
| |
| naut_sys_machine_check(vector, la_ptr, get_irq_regs()); |
| |
| /* Tell the PALcode to clear the machine check */ |
| draina(); |
| wrmces(0x7); |
| mb(); |
| } |
| |
| extern void free_reserved_mem(void *, void *); |
| extern void pcibios_claim_one_bus(struct pci_bus *); |
| |
| static struct resource irongate_mem = { |
| .name = "Irongate PCI MEM", |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| void __init |
| nautilus_init_pci(void) |
| { |
| struct pci_controller *hose = hose_head; |
| struct pci_bus *bus; |
| struct pci_dev *irongate; |
| unsigned long bus_align, bus_size, pci_mem; |
| unsigned long memtop = max_low_pfn << PAGE_SHIFT; |
| |
| /* Scan our single hose. */ |
| bus = pci_scan_bus(0, alpha_mv.pci_ops, hose); |
| hose->bus = bus; |
| pcibios_claim_one_bus(bus); |
| |
| irongate = pci_get_bus_and_slot(0, 0); |
| bus->self = irongate; |
| bus->resource[1] = &irongate_mem; |
| |
| pci_bus_size_bridges(bus); |
| |
| /* IO port range. */ |
| bus->resource[0]->start = 0; |
| bus->resource[0]->end = 0xffff; |
| |
| /* Set up PCI memory range - limit is hardwired to 0xffffffff, |
| base must be at aligned to 16Mb. */ |
| bus_align = bus->resource[1]->start; |
| bus_size = bus->resource[1]->end + 1 - bus_align; |
| if (bus_align < 0x1000000UL) |
| bus_align = 0x1000000UL; |
| |
| pci_mem = (0x100000000UL - bus_size) & -bus_align; |
| |
| bus->resource[1]->start = pci_mem; |
| bus->resource[1]->end = 0xffffffffUL; |
| if (request_resource(&iomem_resource, bus->resource[1]) < 0) |
| printk(KERN_ERR "Failed to request MEM on hose 0\n"); |
| |
| if (pci_mem < memtop) |
| memtop = pci_mem; |
| if (memtop > alpha_mv.min_mem_address) { |
| free_reserved_mem(__va(alpha_mv.min_mem_address), |
| __va(memtop)); |
| printk("nautilus_init_pci: %ldk freed\n", |
| (memtop - alpha_mv.min_mem_address) >> 10); |
| } |
| |
| if ((IRONGATE0->dev_vendor >> 16) > 0x7006) /* Albacore? */ |
| IRONGATE0->pci_mem = pci_mem; |
| |
| pci_bus_assign_resources(bus); |
| pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq); |
| } |
| |
| /* |
| * The System Vectors |
| */ |
| |
| struct alpha_machine_vector nautilus_mv __initmv = { |
| .vector_name = "Nautilus", |
| DO_EV6_MMU, |
| DO_DEFAULT_RTC, |
| DO_IRONGATE_IO, |
| .machine_check = nautilus_machine_check, |
| .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, |
| .min_io_address = DEFAULT_IO_BASE, |
| .min_mem_address = IRONGATE_DEFAULT_MEM_BASE, |
| |
| .nr_irqs = 16, |
| .device_interrupt = isa_device_interrupt, |
| |
| .init_arch = irongate_init_arch, |
| .init_irq = nautilus_init_irq, |
| .init_rtc = common_init_rtc, |
| .init_pci = nautilus_init_pci, |
| .kill_arch = nautilus_kill_arch, |
| .pci_map_irq = nautilus_map_irq, |
| .pci_swizzle = common_swizzle, |
| }; |
| ALIAS_MV(nautilus) |