blob: feed1ed8d9b68f1d690f571bc7842d03a392eddf [file] [log] [blame]
/******************************************************************************
*
* Copyright(c) 2009-2010 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <wlanfae@realtek.com>
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
*
*****************************************************************************/
#include "../wifi.h"
#include "../core.h"
#include "../usb.h"
#include "../efuse.h"
#include "reg.h"
#include "def.h"
#include "phy.h"
#include "mac.h"
#include "dm.h"
#include "rf.h"
#include "sw.h"
#include "trx.h"
#include "led.h"
#include "hw.h"
#include <linux/vmalloc.h>
MODULE_AUTHOR("Georgia <georgia@realtek.com>");
MODULE_AUTHOR("Ziv Huang <ziv_huang@realtek.com>");
MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Realtek 8192C/8188C 802.11n USB wireless");
MODULE_FIRMWARE("rtlwifi/rtl8192cufw.bin");
static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
const struct firmware *firmware;
int err;
rtlpriv->dm.dm_initialgain_enable = 1;
rtlpriv->dm.dm_flag = 0;
rtlpriv->dm.disable_framebursting = 0;
rtlpriv->dm.thermalvalue = 0;
rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
rtlpriv->rtlhal.pfirmware = vmalloc(0x4000);
if (!rtlpriv->rtlhal.pfirmware) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("Can't alloc buffer for fw.\n"));
return 1;
}
/* request fw */
err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
rtlpriv->io.dev);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("Failed to request firmware!\n"));
return 1;
}
if (firmware->size > 0x4000) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("Firmware is too big!\n"));
release_firmware(firmware);
return 1;
}
memcpy(rtlpriv->rtlhal.pfirmware, firmware->data, firmware->size);
rtlpriv->rtlhal.fwsize = firmware->size;
release_firmware(firmware);
return 0;
}
static void rtl92cu_deinit_sw_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
if (rtlpriv->rtlhal.pfirmware) {
vfree(rtlpriv->rtlhal.pfirmware);
rtlpriv->rtlhal.pfirmware = NULL;
}
}
static struct rtl_hal_ops rtl8192cu_hal_ops = {
.init_sw_vars = rtl92cu_init_sw_vars,
.deinit_sw_vars = rtl92cu_deinit_sw_vars,
.read_chip_version = rtl92c_read_chip_version,
.read_eeprom_info = rtl92cu_read_eeprom_info,
.enable_interrupt = rtl92c_enable_interrupt,
.disable_interrupt = rtl92c_disable_interrupt,
.hw_init = rtl92cu_hw_init,
.hw_disable = rtl92cu_card_disable,
.set_network_type = rtl92cu_set_network_type,
.set_chk_bssid = rtl92cu_set_check_bssid,
.set_qos = rtl92c_set_qos,
.set_bcn_reg = rtl92cu_set_beacon_related_registers,
.set_bcn_intv = rtl92cu_set_beacon_interval,
.update_interrupt_mask = rtl92cu_update_interrupt_mask,
.get_hw_reg = rtl92cu_get_hw_reg,
.set_hw_reg = rtl92cu_set_hw_reg,
.update_rate_tbl = rtl92cu_update_hal_rate_table,
.update_rate_mask = rtl92cu_update_hal_rate_mask,
.fill_tx_desc = rtl92cu_tx_fill_desc,
.fill_fake_txdesc = rtl92cu_fill_fake_txdesc,
.fill_tx_cmddesc = rtl92cu_tx_fill_cmddesc,
.cmd_send_packet = rtl92cu_cmd_send_packet,
.query_rx_desc = rtl92cu_rx_query_desc,
.set_channel_access = rtl92cu_update_channel_access_setting,
.radio_onoff_checking = rtl92cu_gpio_radio_on_off_checking,
.set_bw_mode = rtl92c_phy_set_bw_mode,
.switch_channel = rtl92c_phy_sw_chnl,
.dm_watchdog = rtl92c_dm_watchdog,
.scan_operation_backup = rtl92c_phy_scan_operation_backup,
.set_rf_power_state = rtl92cu_phy_set_rf_power_state,
.led_control = rtl92cu_led_control,
.enable_hw_sec = rtl92cu_enable_hw_security_config,
.set_key = rtl92c_set_key,
.init_sw_leds = rtl92cu_init_sw_leds,
.deinit_sw_leds = rtl92cu_deinit_sw_leds,
.get_bbreg = rtl92c_phy_query_bb_reg,
.set_bbreg = rtl92c_phy_set_bb_reg,
.get_rfreg = rtl92cu_phy_query_rf_reg,
.set_rfreg = rtl92cu_phy_set_rf_reg,
.phy_rf6052_config = rtl92cu_phy_rf6052_config,
.phy_rf6052_set_cck_txpower = rtl92cu_phy_rf6052_set_cck_txpower,
.phy_rf6052_set_ofdm_txpower = rtl92cu_phy_rf6052_set_ofdm_txpower,
.config_bb_with_headerfile = _rtl92cu_phy_config_bb_with_headerfile,
.config_bb_with_pgheaderfile = _rtl92cu_phy_config_bb_with_pgheaderfile,
.phy_lc_calibrate = _rtl92cu_phy_lc_calibrate,
.phy_set_bw_mode_callback = rtl92cu_phy_set_bw_mode_callback,
.dm_dynamic_txpower = rtl92cu_dm_dynamic_txpower,
};
static struct rtl_mod_params rtl92cu_mod_params = {
.sw_crypto = 0,
.debug = DBG_EMERG,
};
module_param_named(swenc, rtl92cu_mod_params.sw_crypto, bool, 0444);
module_param_named(debug, rtl92cu_mod_params.debug, int, 0444);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
static struct rtl_hal_usbint_cfg rtl92cu_interface_cfg = {
/* rx */
.in_ep_num = RTL92C_USB_BULK_IN_NUM,
.rx_urb_num = RTL92C_NUM_RX_URBS,
.rx_max_size = RTL92C_SIZE_MAX_RX_BUFFER,
.usb_rx_hdl = rtl8192cu_rx_hdl,
.usb_rx_segregate_hdl = NULL, /* rtl8192c_rx_segregate_hdl; */
/* tx */
.usb_tx_cleanup = rtl8192c_tx_cleanup,
.usb_tx_post_hdl = rtl8192c_tx_post_hdl,
.usb_tx_aggregate_hdl = rtl8192c_tx_aggregate_hdl,
/* endpoint mapping */
.usb_endpoint_mapping = rtl8192cu_endpoint_mapping,
.usb_mq_to_hwq = rtl8192cu_mq_to_hwq,
};
static struct rtl_hal_cfg rtl92cu_hal_cfg = {
.name = "rtl92c_usb",
.fw_name = "rtlwifi/rtl8192cufw.bin",
.ops = &rtl8192cu_hal_ops,
.mod_params = &rtl92cu_mod_params,
.usb_interface_cfg = &rtl92cu_interface_cfg,
.maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
.maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
.maps[SYS_CLK] = REG_SYS_CLKR,
.maps[MAC_RCR_AM] = AM,
.maps[MAC_RCR_AB] = AB,
.maps[MAC_RCR_ACRC32] = ACRC32,
.maps[MAC_RCR_ACF] = ACF,
.maps[MAC_RCR_AAP] = AAP,
.maps[EFUSE_TEST] = REG_EFUSE_TEST,
.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
.maps[EFUSE_CLK] = 0,
.maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
.maps[EFUSE_PWC_EV12V] = PWC_EV12V,
.maps[EFUSE_FEN_ELDR] = FEN_ELDR,
.maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
.maps[EFUSE_ANA8M] = EFUSE_ANA8M,
.maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
.maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
.maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
.maps[RWCAM] = REG_CAMCMD,
.maps[WCAMI] = REG_CAMWRITE,
.maps[RCAMO] = REG_CAMREAD,
.maps[CAMDBG] = REG_CAMDBG,
.maps[SECR] = REG_SECCFG,
.maps[SEC_CAM_NONE] = CAM_NONE,
.maps[SEC_CAM_WEP40] = CAM_WEP40,
.maps[SEC_CAM_TKIP] = CAM_TKIP,
.maps[SEC_CAM_AES] = CAM_AES,
.maps[SEC_CAM_WEP104] = CAM_WEP104,
.maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
.maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
.maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
.maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
.maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
.maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
.maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,
.maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
.maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
.maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
.maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
.maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
.maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
.maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
.maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,
.maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,
.maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
.maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
.maps[RTL_IMR_BcnInt] = IMR_BCNINT,
.maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
.maps[RTL_IMR_RDU] = IMR_RDU,
.maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
.maps[RTL_IMR_BDOK] = IMR_BDOK,
.maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
.maps[RTL_IMR_TBDER] = IMR_TBDER,
.maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
.maps[RTL_IMR_TBDOK] = IMR_TBDOK,
.maps[RTL_IMR_BKDOK] = IMR_BKDOK,
.maps[RTL_IMR_BEDOK] = IMR_BEDOK,
.maps[RTL_IMR_VIDOK] = IMR_VIDOK,
.maps[RTL_IMR_VODOK] = IMR_VODOK,
.maps[RTL_IMR_ROK] = IMR_ROK,
.maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER),
.maps[RTL_RC_CCK_RATE1M] = DESC92_RATE1M,
.maps[RTL_RC_CCK_RATE2M] = DESC92_RATE2M,
.maps[RTL_RC_CCK_RATE5_5M] = DESC92_RATE5_5M,
.maps[RTL_RC_CCK_RATE11M] = DESC92_RATE11M,
.maps[RTL_RC_OFDM_RATE6M] = DESC92_RATE6M,
.maps[RTL_RC_OFDM_RATE9M] = DESC92_RATE9M,
.maps[RTL_RC_OFDM_RATE12M] = DESC92_RATE12M,
.maps[RTL_RC_OFDM_RATE18M] = DESC92_RATE18M,
.maps[RTL_RC_OFDM_RATE24M] = DESC92_RATE24M,
.maps[RTL_RC_OFDM_RATE36M] = DESC92_RATE36M,
.maps[RTL_RC_OFDM_RATE48M] = DESC92_RATE48M,
.maps[RTL_RC_OFDM_RATE54M] = DESC92_RATE54M,
.maps[RTL_RC_HT_RATEMCS7] = DESC92_RATEMCS7,
.maps[RTL_RC_HT_RATEMCS15] = DESC92_RATEMCS15,
};
#define USB_VENDER_ID_REALTEK 0x0bda
/* 2010-10-19 DID_USB_V3.4 */
static struct usb_device_id rtl8192c_usb_ids[] = {
/*=== Realtek demoboard ===*/
/* Default ID */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8191, rtl92cu_hal_cfg)},
/****** 8188CU ********/
/* 8188CE-VAU USB minCard */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8170, rtl92cu_hal_cfg)},
/* 8188cu 1*1 dongle */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8176, rtl92cu_hal_cfg)},
/* 8188cu 1*1 dongle, (b/g mode only) */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8177, rtl92cu_hal_cfg)},
/* 8188cu Slim Solo */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817a, rtl92cu_hal_cfg)},
/* 8188cu Slim Combo */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817b, rtl92cu_hal_cfg)},
/* 8188RU High-power USB Dongle */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817d, rtl92cu_hal_cfg)},
/* 8188CE-VAU USB minCard (b/g mode only) */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817e, rtl92cu_hal_cfg)},
/* 8188RU in Alfa AWUS036NHR */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817f, rtl92cu_hal_cfg)},
/* 8188 Combo for BC4 */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)},
/****** 8192CU ********/
/* 8191cu 1*2 */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8177, rtl92cu_hal_cfg)},
/* 8192cu 2*2 */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817b, rtl92cu_hal_cfg)},
/* 8192CE-VAU USB minCard */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817c, rtl92cu_hal_cfg)},
/*=== Customer ID ===*/
/****** 8188CU ********/
{RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/
{RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
{RTL_USB_DEVICE(0x0Df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
/* HP - Lite-On ,8188CUS Slim Combo */
{RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)},
{RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */
{RTL_USB_DEVICE(0x2001, 0x3308, rtl92cu_hal_cfg)}, /*D-Link - Alpha*/
{RTL_USB_DEVICE(0x2019, 0xab2a, rtl92cu_hal_cfg)}, /*Planex - Abocom*/
{RTL_USB_DEVICE(0x2019, 0xed17, rtl92cu_hal_cfg)}, /*PCI - Edimax*/
{RTL_USB_DEVICE(0x20f4, 0x648b, rtl92cu_hal_cfg)}, /*TRENDnet - Cameo*/
{RTL_USB_DEVICE(0x7392, 0x7811, rtl92cu_hal_cfg)}, /*Edimax - Edimax*/
{RTL_USB_DEVICE(0x13d3, 0x3358, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/
/* Russian customer -Azwave (8188CE-VAU b/g mode only) */
{RTL_USB_DEVICE(0x13d3, 0x3359, rtl92cu_hal_cfg)},
{RTL_USB_DEVICE(0x4855, 0x0090, rtl92cu_hal_cfg)}, /* Feixun */
{RTL_USB_DEVICE(0x4855, 0x0091, rtl92cu_hal_cfg)}, /* NetweeN-Feixun */
{RTL_USB_DEVICE(0x9846, 0x9041, rtl92cu_hal_cfg)}, /* Netgear Cameo */
/****** 8192CU ********/
{RTL_USB_DEVICE(0x0586, 0x341f, rtl92cu_hal_cfg)}, /*Zyxel -Abocom*/
{RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/
{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
{RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
{RTL_USB_DEVICE(0x2001, 0x3309, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
{RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
{RTL_USB_DEVICE(0x2019, 0xab2b, rtl92cu_hal_cfg)}, /*Planex -Abocom*/
{RTL_USB_DEVICE(0x7392, 0x7822, rtl92cu_hal_cfg)}, /*Edimax -Edimax*/
{}
};
MODULE_DEVICE_TABLE(usb, rtl8192c_usb_ids);
static struct usb_driver rtl8192cu_driver = {
.name = "rtl8192cu",
.probe = rtl_usb_probe,
.disconnect = rtl_usb_disconnect,
.id_table = rtl8192c_usb_ids,
#ifdef CONFIG_PM
/* .suspend = rtl_usb_suspend, */
/* .resume = rtl_usb_resume, */
/* .reset_resume = rtl8192c_resume, */
#endif /* CONFIG_PM */
#ifdef CONFIG_AUTOSUSPEND
.supports_autosuspend = 1,
#endif
};
static int __init rtl8192cu_init(void)
{
return usb_register(&rtl8192cu_driver);
}
static void __exit rtl8192cu_exit(void)
{
usb_deregister(&rtl8192cu_driver);
}
module_init(rtl8192cu_init);
module_exit(rtl8192cu_exit);