drivers/usb/core/generic.c - maze/linux - Git at Google

 /*
  * drivers/usb/generic.c - generic driver for USB devices (not interfaces)
  *
  * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
  *
  * based on drivers/usb/usb.c which had the following copyrights:
  *	(C) Copyright Linus Torvalds 1999
  *	(C) Copyright Johannes Erdfelt 1999-2001
  *	(C) Copyright Andreas Gal 1999
  *	(C) Copyright Gregory P. Smith 1999
  *	(C) Copyright Deti Fliegl 1999 (new USB architecture)
  *	(C) Copyright Randy Dunlap 2000
  *	(C) Copyright David Brownell 2000-2004
  *	(C) Copyright Yggdrasil Computing, Inc. 2000
  *		(usb_device_id matching changes by Adam J. Richter)
  *	(C) Copyright Greg Kroah-Hartman 2002-2003
  *
  */

 #include <linux/usb.h>
 #include "usb.h"
 #include "hcd.h"

 static inline const char *plural(int n)
 {
 	return (n == 1 ? "" : "s");
 }

 static int is_rndis(struct usb_interface_descriptor *desc)
 {
 	return desc->bInterfaceClass == USB_CLASS_COMM
 		&& desc->bInterfaceSubClass == 2
 		&& desc->bInterfaceProtocol == 0xff;
 }

 static int is_activesync(struct usb_interface_descriptor *desc)
 {
 	return desc->bInterfaceClass == USB_CLASS_MISC
 		&& desc->bInterfaceSubClass == 1
 		&& desc->bInterfaceProtocol == 1;
 }

 int usb_choose_configuration(struct usb_device *udev)
 {
 	int i;
 	int num_configs;
 	int insufficient_power = 0;
 	struct usb_host_config *c, *best;

 	best = NULL;
 	c = udev->config;
 	num_configs = udev->descriptor.bNumConfigurations;
 	for (i = 0; i < num_configs; (i++, c++)) {
 		struct usb_interface_descriptor	*desc = NULL;

 		/* It's possible that a config has no interfaces! */
 		if (c->desc.bNumInterfaces > 0)
 			desc = &c->intf_cache[0]->altsetting->desc;

 		/*
 		 * HP's USB bus-powered keyboard has only one configuration
 		 * and it claims to be self-powered; other devices may have
 		 * similar errors in their descriptors.  If the next test
 		 * were allowed to execute, such configurations would always
 		 * be rejected and the devices would not work as expected.
 		 * In the meantime, we run the risk of selecting a config
 		 * that requires external power at a time when that power
 		 * isn't available.  It seems to be the lesser of two evils.
 		 *
 		 * Bugzilla #6448 reports a device that appears to crash
 		 * when it receives a GET_DEVICE_STATUS request!  We don't
 		 * have any other way to tell whether a device is self-powered,
 		 * but since we don't use that information anywhere but here,
 		 * the call has been removed.
 		 *
 		 * Maybe the GET_DEVICE_STATUS call and the test below can
 		 * be reinstated when device firmwares become more reliable.
 		 * Don't hold your breath.
 		 */
 #if 0
 		/* Rule out self-powered configs for a bus-powered device */
 		if (bus_powered && (c->desc.bmAttributes &
 					USB_CONFIG_ATT_SELFPOWER))
 			continue;
 #endif

 		/*
 		 * The next test may not be as effective as it should be.
 		 * Some hubs have errors in their descriptor, claiming
 		 * to be self-powered when they are really bus-powered.
 		 * We will overestimate the amount of current such hubs
 		 * make available for each port.
 		 *
 		 * This is a fairly benign sort of failure.  It won't
 		 * cause us to reject configurations that we should have
 		 * accepted.
 		 */

 		/* Rule out configs that draw too much bus current */
 		if (c->desc.bMaxPower * 2 > udev->bus_mA) {
 			insufficient_power++;
 			continue;
 		}

 		/* When the first config's first interface is one of Microsoft's
 		 * pet nonstandard Ethernet-over-USB protocols, ignore it unless
 		 * this kernel has enabled the necessary host side driver.
 		 */
 		if (i == 0 && desc && (is_rndis(desc) || is_activesync(desc))) {
 #if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
 			continue;
 #else
 			best = c;
 #endif
 		}

 		/* From the remaining configs, choose the first one whose
 		 * first interface is for a non-vendor-specific class.
 		 * Reason: Linux is more likely to have a class driver
 		 * than a vendor-specific driver. */
 		else if (udev->descriptor.bDeviceClass !=
 						USB_CLASS_VENDOR_SPEC &&
 				(desc && desc->bInterfaceClass !=
 						USB_CLASS_VENDOR_SPEC)) {
 			best = c;
 			break;
 		}

 		/* If all the remaining configs are vendor-specific,
 		 * choose the first one. */
 		else if (!best)
 			best = c;
 	}

 	if (insufficient_power > 0)
 		dev_info(&udev->dev, "rejected %d configuration%s "
 			"due to insufficient available bus power\n",
 			insufficient_power, plural(insufficient_power));

 	if (best) {
 		i = best->desc.bConfigurationValue;
 		dev_dbg(&udev->dev,
 			"configuration #%d chosen from %d choice%s\n",
 			i, num_configs, plural(num_configs));
 	} else {
 		i = -1;
 		dev_warn(&udev->dev,
 			"no configuration chosen from %d choice%s\n",
 			num_configs, plural(num_configs));
 	}
 	return i;
 }

 static int generic_probe(struct usb_device *udev)
 {
 	int err, c;

 	/* Choose and set the configuration.  This registers the interfaces
 	 * with the driver core and lets interface drivers bind to them.
 	 */
 	if (usb_device_is_owned(udev))
 		;		/* Don't configure if the device is owned */
 	else if (udev->authorized == 0)
 		dev_err(&udev->dev, "Device is not authorized for usage\n");
 	else {
 		c = usb_choose_configuration(udev);
 		if (c >= 0) {
 			err = usb_set_configuration(udev, c);
 			if (err) {
 				dev_err(&udev->dev, "can't set config #%d, error %d\n",
 					c, err);
 				/* This need not be fatal.  The user can try to
 				 * set other configurations. */
 			}
 		}
 	}
 	/* USB device state == configured ... usable */
 	usb_notify_add_device(udev);

 	return 0;
 }

 static void generic_disconnect(struct usb_device *udev)
 {
 	usb_notify_remove_device(udev);

 	/* if this is only an unbind, not a physical disconnect, then
 	 * unconfigure the device */
 	if (udev->actconfig)
 		usb_set_configuration(udev, -1);
 }

 #ifdef	CONFIG_PM

 static int generic_suspend(struct usb_device *udev, pm_message_t msg)
 {
 	int rc;

 	/* Normal USB devices suspend through their upstream port.
 	 * Root hubs don't have upstream ports to suspend,
 	 * so we have to shut down their downstream HC-to-USB
 	 * interfaces manually by doing a bus (or "global") suspend.
 	 */
 	if (!udev->parent)
 		rc = hcd_bus_suspend(udev, msg);

 	/* Non-root devices don't need to do anything for FREEZE or PRETHAW */
 	else if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_PRETHAW)
 		rc = 0;
 	else
 		rc = usb_port_suspend(udev, msg);

 	return rc;
 }

 static int generic_resume(struct usb_device *udev, pm_message_t msg)
 {
 	int rc;

 	/* Normal USB devices resume/reset through their upstream port.
 	 * Root hubs don't have upstream ports to resume or reset,
 	 * so we have to start up their downstream HC-to-USB
 	 * interfaces manually by doing a bus (or "global") resume.
 	 */
 	if (!udev->parent)
 		rc = hcd_bus_resume(udev, msg);
 	else
 		rc = usb_port_resume(udev, msg);
 	return rc;
 }

 #endif	/* CONFIG_PM */

 struct usb_device_driver usb_generic_driver = {
 	.name =	"usb",
 	.probe = generic_probe,
 	.disconnect = generic_disconnect,
 #ifdef	CONFIG_PM
 	.suspend = generic_suspend,
 	.resume = generic_resume,
 #endif
 	.supports_autosuspend = 1,
 };
	/*
	* drivers/usb/generic.c - generic driver for USB devices (not interfaces)
	*
	* (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
	*
	* based on drivers/usb/usb.c which had the following copyrights:
	* (C) Copyright Linus Torvalds 1999
	* (C) Copyright Johannes Erdfelt 1999-2001
	* (C) Copyright Andreas Gal 1999
	* (C) Copyright Gregory P. Smith 1999
	* (C) Copyright Deti Fliegl 1999 (new USB architecture)
	* (C) Copyright Randy Dunlap 2000
	* (C) Copyright David Brownell 2000-2004
	* (C) Copyright Yggdrasil Computing, Inc. 2000
	* (usb_device_id matching changes by Adam J. Richter)
	* (C) Copyright Greg Kroah-Hartman 2002-2003
	*
	*/

	#include <linux/usb.h>
	#include "usb.h"
	#include "hcd.h"

	static inline const char *plural(int n)
	{
	return (n == 1 ? "" : "s");
	}

	static int is_rndis(struct usb_interface_descriptor *desc)
	{
	return desc->bInterfaceClass == USB_CLASS_COMM
	&& desc->bInterfaceSubClass == 2
	&& desc->bInterfaceProtocol == 0xff;
	}

	static int is_activesync(struct usb_interface_descriptor *desc)
	{
	return desc->bInterfaceClass == USB_CLASS_MISC
	&& desc->bInterfaceSubClass == 1
	&& desc->bInterfaceProtocol == 1;
	}

	int usb_choose_configuration(struct usb_device *udev)
	{
	int i;
	int num_configs;
	int insufficient_power = 0;
	struct usb_host_config c, best;

	best = NULL;
	c = udev->config;
	num_configs = udev->descriptor.bNumConfigurations;
	for (i = 0; i < num_configs; (i++, c++)) {
	struct usb_interface_descriptor *desc = NULL;

	/* It's possible that a config has no interfaces! */
	if (c->desc.bNumInterfaces > 0)
	desc = &c->intf_cache[0]->altsetting->desc;

	/*
	* HP's USB bus-powered keyboard has only one configuration
	* and it claims to be self-powered; other devices may have
	* similar errors in their descriptors. If the next test
	* were allowed to execute, such configurations would always
	* be rejected and the devices would not work as expected.
	* In the meantime, we run the risk of selecting a config
	* that requires external power at a time when that power
	* isn't available. It seems to be the lesser of two evils.
	*
	* Bugzilla #6448 reports a device that appears to crash
	* when it receives a GET_DEVICE_STATUS request! We don't
	* have any other way to tell whether a device is self-powered,
	* but since we don't use that information anywhere but here,
	* the call has been removed.
	*
	* Maybe the GET_DEVICE_STATUS call and the test below can
	* be reinstated when device firmwares become more reliable.
	* Don't hold your breath.
	*/
	#if 0
	/* Rule out self-powered configs for a bus-powered device */
	if (bus_powered && (c->desc.bmAttributes &
	USB_CONFIG_ATT_SELFPOWER))
	continue;
	#endif

	/*
	* The next test may not be as effective as it should be.
	* Some hubs have errors in their descriptor, claiming
	* to be self-powered when they are really bus-powered.
	* We will overestimate the amount of current such hubs
	* make available for each port.
	*
	* This is a fairly benign sort of failure. It won't
	* cause us to reject configurations that we should have
	* accepted.
	*/

	/* Rule out configs that draw too much bus current */
	if (c->desc.bMaxPower * 2 > udev->bus_mA) {
	insufficient_power++;
	continue;
	}

	/* When the first config's first interface is one of Microsoft's
	* pet nonstandard Ethernet-over-USB protocols, ignore it unless
	* this kernel has enabled the necessary host side driver.
	*/
	if (i == 0 && desc && (is_rndis(desc) \|\| is_activesync(desc))) {
	#if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
	continue;
	#else
	best = c;
	#endif
	}

	/* From the remaining configs, choose the first one whose
	* first interface is for a non-vendor-specific class.
	* Reason: Linux is more likely to have a class driver
	* than a vendor-specific driver. */
	else if (udev->descriptor.bDeviceClass !=
	USB_CLASS_VENDOR_SPEC &&
	(desc && desc->bInterfaceClass !=
	USB_CLASS_VENDOR_SPEC)) {
	best = c;
	break;
	}

	/* If all the remaining configs are vendor-specific,
	* choose the first one. */
	else if (!best)
	best = c;
	}

	if (insufficient_power > 0)
	dev_info(&udev->dev, "rejected %d configuration%s "
	"due to insufficient available bus power\n",
	insufficient_power, plural(insufficient_power));

	if (best) {
	i = best->desc.bConfigurationValue;
	dev_dbg(&udev->dev,
	"configuration #%d chosen from %d choice%s\n",
	i, num_configs, plural(num_configs));
	} else {
	i = -1;
	dev_warn(&udev->dev,
	"no configuration chosen from %d choice%s\n",
	num_configs, plural(num_configs));
	}
	return i;
	}

	static int generic_probe(struct usb_device *udev)
	{
	int err, c;

	/* Choose and set the configuration. This registers the interfaces
	* with the driver core and lets interface drivers bind to them.
	*/
	if (usb_device_is_owned(udev))
	; /* Don't configure if the device is owned */
	else if (udev->authorized == 0)
	dev_err(&udev->dev, "Device is not authorized for usage\n");
	else {
	c = usb_choose_configuration(udev);
	if (c >= 0) {
	err = usb_set_configuration(udev, c);
	if (err) {
	dev_err(&udev->dev, "can't set config #%d, error %d\n",
	c, err);
	/* This need not be fatal. The user can try to
	* set other configurations. */
	}
	}
	}
	/* USB device state == configured ... usable */
	usb_notify_add_device(udev);

	return 0;
	}

	static void generic_disconnect(struct usb_device *udev)
	{
	usb_notify_remove_device(udev);

	/* if this is only an unbind, not a physical disconnect, then
	* unconfigure the device */
	if (udev->actconfig)
	usb_set_configuration(udev, -1);
	}

	#ifdef CONFIG_PM

	static int generic_suspend(struct usb_device *udev, pm_message_t msg)
	{
	int rc;

	/* Normal USB devices suspend through their upstream port.
	* Root hubs don't have upstream ports to suspend,
	* so we have to shut down their downstream HC-to-USB
	* interfaces manually by doing a bus (or "global") suspend.
	*/
	if (!udev->parent)
	rc = hcd_bus_suspend(udev, msg);

	/* Non-root devices don't need to do anything for FREEZE or PRETHAW */
	else if (msg.event == PM_EVENT_FREEZE \|\| msg.event == PM_EVENT_PRETHAW)
	rc = 0;
	else
	rc = usb_port_suspend(udev, msg);

	return rc;
	}

	static int generic_resume(struct usb_device *udev, pm_message_t msg)
	{
	int rc;

	/* Normal USB devices resume/reset through their upstream port.
	* Root hubs don't have upstream ports to resume or reset,
	* so we have to start up their downstream HC-to-USB
	* interfaces manually by doing a bus (or "global") resume.
	*/
	if (!udev->parent)
	rc = hcd_bus_resume(udev, msg);
	else
	rc = usb_port_resume(udev, msg);
	return rc;
	}

	#endif /* CONFIG_PM */

	struct usb_device_driver usb_generic_driver = {
	.name = "usb",
	.probe = generic_probe,
	.disconnect = generic_disconnect,
	#ifdef CONFIG_PM
	.suspend = generic_suspend,
	.resume = generic_resume,
	#endif
	.supports_autosuspend = 1,
	};