| /* |
| * linux/arch/arm/mach-omap2/board-rx51-video.c |
| * |
| * Copyright (C) 2010 Nokia |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/spi/spi.h> |
| #include <linux/mm.h> |
| |
| #include <asm/mach-types.h> |
| #include <plat/display.h> |
| #include <plat/vram.h> |
| #include <plat/mcspi.h> |
| |
| #include "mux.h" |
| |
| #define RX51_LCD_RESET_GPIO 90 |
| |
| #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) |
| |
| static int rx51_lcd_enable(struct omap_dss_device *dssdev) |
| { |
| gpio_set_value(dssdev->reset_gpio, 1); |
| return 0; |
| } |
| |
| static void rx51_lcd_disable(struct omap_dss_device *dssdev) |
| { |
| gpio_set_value(dssdev->reset_gpio, 0); |
| } |
| |
| static struct omap_dss_device rx51_lcd_device = { |
| .name = "lcd", |
| .driver_name = "panel-acx565akm", |
| .type = OMAP_DISPLAY_TYPE_SDI, |
| .phy.sdi.datapairs = 2, |
| .reset_gpio = RX51_LCD_RESET_GPIO, |
| .platform_enable = rx51_lcd_enable, |
| .platform_disable = rx51_lcd_disable, |
| }; |
| |
| static struct omap_dss_device *rx51_dss_devices[] = { |
| &rx51_lcd_device, |
| }; |
| |
| static struct omap_dss_board_info rx51_dss_board_info = { |
| .num_devices = ARRAY_SIZE(rx51_dss_devices), |
| .devices = rx51_dss_devices, |
| .default_device = &rx51_lcd_device, |
| }; |
| |
| struct platform_device rx51_display_device = { |
| .name = "omapdss", |
| .id = -1, |
| .dev = { |
| .platform_data = &rx51_dss_board_info, |
| }, |
| }; |
| |
| static struct platform_device *rx51_video_devices[] __initdata = { |
| &rx51_display_device, |
| }; |
| |
| static int __init rx51_video_init(void) |
| { |
| if (!machine_is_nokia_rx51()) |
| return 0; |
| |
| if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) { |
| pr_err("%s cannot configure MUX for LCD RESET\n", __func__); |
| return 0; |
| } |
| |
| if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) { |
| pr_err("%s failed to get LCD Reset GPIO\n", __func__); |
| return 0; |
| } |
| |
| gpio_direction_output(RX51_LCD_RESET_GPIO, 1); |
| |
| platform_add_devices(rx51_video_devices, |
| ARRAY_SIZE(rx51_video_devices)); |
| return 0; |
| } |
| |
| subsys_initcall(rx51_video_init); |
| |
| void __init rx51_video_mem_init(void) |
| { |
| /* |
| * GFX 864x480x32bpp |
| * VID1/2 1280x720x32bpp double buffered |
| */ |
| omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) + |
| 2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0); |
| } |
| |
| #else |
| void __init rx51_video_mem_init(void) { } |
| #endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */ |